.. BSD LICENSE Copyright (c) 2016 QLogic Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of QLogic Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. QEDE Poll Mode Driver ====================== The QEDE poll mode driver library (**librte_pmd_qede**) implements support for **QLogic FastLinQ QL4xxxx 25G/40G/100G CNA** family of adapters as well as their virtual functions (VF) in SR-IOV context. It is supported on several standard Linux distros like RHEL7.x, SLES12.x and Ubuntu. It is compile-tested under FreeBSD OS. More information can be found at `QLogic Corporation's Website `_. Supported Features ------------------ - Unicast/Multicast filtering - Promiscuous mode - Allmulti mode - Port hardware statistics - Jumbo frames - VLAN offload - Filtering and stripping - Stateless checksum offloads (IPv4/TCP/UDP) - Multiple Rx/Tx queues - RSS (with RETA/hash table/key) - TSS - Multiple MAC address - Default pause flow control - SR-IOV VF - MTU change - Multiprocess aware - Scatter-Gather Non-supported Features ---------------------- - SR-IOV PF - Tunneling offloads - LRO/TSO - NPAR Supported QLogic Adapters ------------------------- - QLogic FastLinQ QL4xxxx 10G/25G/40G/100G CNAs. Prerequisites ------------- - Requires firmware version **8.10.x.** and management firmware version **8.10.x or higher**. Firmware may be available inbox in certain newer Linux distros under the standard directory ``E.g. /lib/firmware/qed/qed_init_values-8.10.9.0.bin`` - If the required firmware files are not available then visit `QLogic Driver Download Center `_. Performance note ~~~~~~~~~~~~~~~~ - For better performance, it is recommended to use 4K or higher RX/TX rings. Config File Options ~~~~~~~~~~~~~~~~~~~ The following options can be modified in the ``.config`` file. Please note that enabling debugging options may affect system performance. - ``CONFIG_RTE_LIBRTE_QEDE_PMD`` (default **y**) Toggle compilation of QEDE PMD driver. - ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO`` (default **n**) Toggle display of generic debugging messages. - ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER`` (default **n**) Toggle display of ecore related messages. - ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX`` (default **n**) Toggle display of transmit fast path run-time messages. - ``CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX`` (default **n**) Toggle display of receive fast path run-time messages. - ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**) Gives absolute path of firmware file. ``Eg: "/lib/firmware/qed/qed_init_values_zipped-8.10.9.0.bin"`` Empty string indicates driver will pick up the firmware file from the default location. Driver Compilation ~~~~~~~~~~~~~~~~~~ To compile QEDE PMD for Linux x86_64 gcc target, run the following ``make`` command:: cd make config T=x86_64-native-linuxapp-gcc install To compile QEDE PMD for Linux x86_64 clang target, run the following ``make`` command:: cd make config T=x86_64-native-linuxapp-clang install To compile QEDE PMD for FreeBSD x86_64 clang target, run the following ``gmake`` command:: cd gmake config T=x86_64-native-bsdapp-clang install To compile QEDE PMD for FreeBSD x86_64 gcc target, run the following ``gmake`` command:: cd gmake config T=x86_64-native-bsdapp-gcc install -Wl,-rpath=\ /usr/local/lib/gcc49 CC=gcc49 Sample Application Notes ~~~~~~~~~~~~~~~~~~~~~~~~ This section demonstrates how to launch ``testpmd`` with QLogic 4xxxx devices managed by ``librte_pmd_qede`` in Linux operating system. #. Request huge pages: .. code-block:: console echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/ \ nr_hugepages #. Load ``igb_uio`` driver: .. code-block:: console insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko #. Bind the QLogic 4xxxx adapters to ``igb_uio`` loaded in the previous step: .. code-block:: console ./tools/dpdk-devbind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 \ 0000:84:00.2 0000:84:00.3 #. Start ``testpmd`` with basic parameters: (Enable QEDE_DEBUG_INFO=y to view informational messages) .. code-block:: console testpmd -c 0xff1 -n 4 -- -i --nb-cores=8 --portmask=0xf --rxd=4096 \ --txd=4096 --txfreet=4068 --enable-rx-cksum --rxq=4 --txq=4 \ --rss-ip --rss-udp [...] EAL: PCI device 0000:84:00.0 on NUMA socket 1 EAL: probe driver: 1077:1634 rte_qede_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:84:00.1 on NUMA socket 1 EAL: probe driver: 1077:1634 rte_qede_pmd EAL: Not managed by a supported kernel driver, skipped EAL: PCI device 0000:88:00.0 on NUMA socket 1 EAL: probe driver: 1077:1656 rte_qede_pmd EAL: PCI memory mapped at 0x7f738b200000 EAL: PCI memory mapped at 0x7f738b280000 EAL: PCI memory mapped at 0x7f738b300000 PMD: Chip details : BB1 PMD: Driver version : QEDE PMD 8.7.9.0_1.0.0 PMD: Firmware version : 8.7.7.0 PMD: Management firmware version : 8.7.8.0 PMD: Firmware file : /lib/firmware/qed/qed_init_values_zipped-8.7.7.0.bin [QEDE PMD: (84:00.0:dpdk-port-0)]qede_common_dev_init:macaddr \ 00:0e:1e:d2:09:9c [...] [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 0 num_desc 4096 \ tx_free_thresh 4068 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 1 num_desc 4096 \ tx_free_thresh 4068 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 2 num_desc 4096 \ tx_free_thresh 4068 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_tx_queue_setup:txq 3 num_desc 4096 \ tx_free_thresh 4068 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 0 num_desc 4096 \ rx_buf_size=2148 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 1 num_desc 4096 \ rx_buf_size=2148 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 2 num_desc 4096 \ rx_buf_size=2148 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_rx_queue_setup:rxq 3 num_desc 4096 \ rx_buf_size=2148 socket 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:port 0 [QEDE PMD: (84:00.0:dpdk-port-0)]qede_dev_start:link status: down [...] Checking link statuses... Port 0 Link Up - speed 25000 Mbps - full-duplex Port 1 Link Up - speed 25000 Mbps - full-duplex Port 2 Link Up - speed 25000 Mbps - full-duplex Port 3 Link Up - speed 25000 Mbps - full-duplex Done testpmd> SR-IOV: Prerequisites and Sample Application Notes ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This section provides instructions to configure SR-IOV with Linux OS. **Note**: librte_pmd_qede will be used to bind to SR-IOV VF device and Linux native kernel driver (QEDE) will function as SR-IOV PF driver. Requires PF driver to be 8.10.x.x or higher. #. Verify SR-IOV and ARI capability is enabled on the adapter using ``lspci``: .. code-block:: console lspci -s -vvv Example output: .. code-block:: console [...] Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI) [...] Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV) [...] Kernel driver in use: igb_uio #. Load the kernel module: .. code-block:: console modprobe qede Example output: .. code-block:: console systemd-udevd[4848]: renamed network interface eth0 to ens5f0 systemd-udevd[4848]: renamed network interface eth1 to ens5f1 #. Bring up the PF ports: .. code-block:: console ifconfig ens5f0 up ifconfig ens5f1 up #. Create VF device(s): Echo the number of VFs to be created into ``"sriov_numvfs"`` sysfs entry of the parent PF. Example output: .. code-block:: console echo 2 > /sys/devices/pci0000:00/0000:00:03.0/0000:81:00.0/sriov_numvfs #. Assign VF MAC address: Assign MAC address to the VF using iproute2 utility. The syntax is:: ip link set vf mac Example output: .. code-block:: console ip link set ens5f0 vf 0 mac 52:54:00:2f:9d:e8 #. PCI Passthrough: The VF devices may be passed through to the guest VM using ``virt-manager`` or ``virsh``. QEDE PMD should be used to bind the VF devices in the guest VM using the instructions outlined in the Application notes above.