.. SPDX-License-Identifier: BSD-3-Clause Copyright 2018 The DPDK contributors DPDK Release 18.11 ================== .. **Read this first.** The text in the sections below explains how to update the release notes. Use proper spelling, capitalization and punctuation in all sections. Variable and config names should be quoted as fixed width text: ``LIKE_THIS``. Build the docs and view the output file to ensure the changes are correct:: make doc-guides-html xdg-open build/doc/html/guides/rel_notes/release_18_11.html New Features ------------ .. This section should contain new features added in this release. Sample format: * **Add a title in the past tense with a full stop.** Add a short 1-2 sentence description in the past tense. The description should be enough to allow someone scanning the release notes to understand the new feature. If the feature adds a lot of sub-features you can use a bullet list like this: * Added feature foo to do something. * Enhanced feature bar to do something else. Refer to the previous release notes for examples. Suggested order in release notes items: * Core libs (EAL, mempool, ring, mbuf, buses) * Device abstraction libs and PMDs - ethdev (lib, PMDs) - cryptodev (lib, PMDs) - eventdev (lib, PMDs) - etc * Other libs * Apps, Examples, Tools (if significant) This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **Added support for using externally allocated memory in DPDK.** DPDK has added support for creating new ``rte_malloc`` heaps referencing memory that was created outside of DPDK's own page allocator, and using that memory natively with any other DPDK library or data structure. * **Added check for ensuring allocated memory is addressable by devices.** Some devices can have addressing limitations so a new function, ``rte_mem_check_dma_mask()``, has been added for checking that allocated memory is not out of the device range. Since memory can now be allocated dynamically after initialization, a DMA mask is stored and any new allocated memory will be checked against it and rejected if it is out of range. If more than one device has addressing limitations, the DMA mask is the more restrictive one. * **Updated the C11 memory model version of the ring library.** Added changes to decrease latency for architectures using the C11 memory model version of the ring library. On Cavium ThunderX2 platform, the changes decreased latency by 27-29% and 3-15% for MPMC and SPSC cases respectively (with 2 lcores). The real improvements may vary with the number of contending lcores and the size of the ring. * **Added hot-unplug handle mechanism.** Added ``rte_dev_hotplug_handle_enable()`` and ``rte_dev_hotplug_handle_disable()`` for enabling or disabling the hotplug handle mechanism. * **Added support for device multi-process hotplug.** Added support for hotplug and hot-unplug in a multiprocessing scenario. Any ethdev devices created in the primary process will be regarded as shared and will be available for all DPDK processes. Synchronization between processes will be done using DPDK IPC. * **Added new Flow API actions to rewrite fields in packet headers.** Added new Flow API actions to: * Modify source and destination IP addresses in the outermost IPv4/IPv6 headers. * Modify source and destination port numbers in the outermost TCP/UDP headers. * **Added new Flow API action to swap MAC addresses in Ethernet header.** Added new Flow API action to swap the source and destination MAC addresses in the outermost Ethernet header. * **Add support to offload more flow match and actions for CXGBE PMD.** The Flow API support has been enhanced for the CXGBE Poll Mode Driver to offload: * Match items: destination MAC address. * Action items: push/pop/rewrite vlan header, rewrite IP addresses in outermost IPv4/IPv6 header, rewrite port numbers in outermost TCP/UDP header, swap MAC addresses in outermost Ethernet header. * **Added a devarg to use the latest supported vector path in i40e.** A new devarg ``use-latest-supported-vec`` was introduced to allow users to choose the latest vector path that the platform supported. For example, users can use AVX2 vector path on BDW/HSW to get better performance. * **Added support for SR-IOV in netvsc PMD.** The ``netvsc`` poll mode driver now supports the Accelerated Networking SR-IOV option in Hyper-V and Azure. This is an alternative to the previous vdev_netvsc, tap, and failsafe drivers combination. * **Added a new net driver for Marvell Armada 3k device.** Added the new ``mvneta`` net driver for Marvell Armada 3k device. See the :doc:`../nics/mvneta` NIC guide for more details on this new driver. * **Added NXP ENETC PMD.** Added the new enetc driver for the NXP enetc platform. See the :doc:`../nics/enetc` NIC driver guide for more details on this new driver. * **Added Ethernet poll mode driver for Aquantia aQtion family of 10G devices.** Added the new ``atlantic`` ethernet poll mode driver for Aquantia XGBE devices. See the :doc:`../nics/atlantic` NIC driver guide for more details on this driver. * **Updated mlx5 driver.** Updated the mlx5 driver including the following changes: * Improved security of PMD to prevent the NIC from getting stuck when the application misbehaves. * Reworked flow engine to supported e-switch flow rules (transfer attribute). * Added support for header re-write(L2-L4), VXLAN encap/decap, count, match on TCP flags and multiple flow groups with e-switch flow rules. * Added support for match on metadata, VXLAN and MPLS encap/decap with flow rules. * Added support for ``RTE_ETH_DEV_CLOSE_REMOVE`` flag to provide better support for representors. * Added support for meson build. * Fixed build issue with PPC. * Added support for BlueField VF. * Added support for externally allocated static memory for DMA. * **Updated Solarflare network PMD.** Updated the sfc_efx driver including the following changes: * Added support for Rx scatter in EF10 datapath implementation. * Added support for Rx descriptor status API in EF10 datapath implementation. * Added support for TSO in EF10 datapath implementation. * Added support for Tx descriptor status API in EF10 (ef10 and ef10_simple) datapaths implementation. * **Updated the enic driver.** * Added AVX2-based vectorized Rx handler. * Added VLAN and checksum offloads to the simple Tx handler. * Added the "count" flow action. * Enabled the virtual address IOVA mode. * **Updated the failsafe driver.** Updated the failsafe driver including the following changes: * Added support for Rx and Tx queues start and stop. * Added support for Rx and Tx queues deferred start. * Added support for runtime Rx and Tx queues setup. * Added support multicast MAC address set. * **Added a devarg to use a PCAP interface physical MAC address.** A new devarg ``phy_mac`` was introduced to allow users to use the physical MAC address of the selected PCAP interface. * **Added TAP Rx/Tx queues sharing with a secondary process.** Added support to allow a secondary process to attach a TAP device created in the primary process, probe the queues, and process Rx/Tx in a secondary process. * **Added classification and metering support to SoftNIC PMD.** Added support for flow classification (rte_flow API), and metering and policing (rte_mtr API) to the SoftNIC PMD. * **Added Crypto support to the Softnic PMD.** The Softnic is now capable of processing symmetric crypto workloads such as cipher, cipher-authentication chaining, and AEAD encryption and decryption. This is achieved by calling DPDK Cryptodev APIs. * **Added cryptodev port to port library.** Cryptodev port is a shim layer in the port library that interacts with DPDK Cryptodev PMDs including burst enqueuing and dequeuing crypto operations. * **Added symmetric cryptographic actions to the pipeline library.** In the pipeline library support was added for symmetric crypto action parsing and an action handler was implemented. The action allows automatic preparation of the crypto operation with the rules specified such as algorithm, key, and IV, etc. for the cryptodev port to process. * **Updated the AESNI MB PMD.** The AESNI MB PMD has been updated with additional support for the AES-GCM algorithm. * **Added NXP CAAM JR PMD.** Added the new caam job ring driver for NXP platforms. See the :doc:`../cryptodevs/caam_jr` guide for more details on this new driver. * **Added support for GEN3 devices to Intel QAT driver.** Added support for the third generation of Intel QuickAssist devices. * **Updated the QAT PMD.** The QAT PMD was updated with additional support for: * The AES-CMAC algorithm. * **Added support for Dynamic Huffman Encoding to Intel QAT comp PMD.** The Intel QuickAssist (QAT) compression PMD has been updated with support for Dynamic Huffman Encoding for the Deflate algorithm. * **Added Event Ethernet Tx Adapter.** Added event ethernet Tx adapter library that provides configuration and data path APIs for the ethernet transmit stage of an event driven packet processing application. These APIs abstract the implementation of the transmit stage and allow the application to use eventdev PMD support or a common implementation. * **Added Distributed Software Eventdev PMD.** Added the new Distributed Software Event Device (DSW), which is a pure-software eventdev driver distributing the work of scheduling among all eventdev ports and the lcores using them. DSW, compared to the SW eventdev PMD, sacrifices load balancing performance to gain better event scheduling throughput and scalability. * **Added extendable bucket feature to hash library (rte_hash).** This new "extendable bucket" feature provides 100% insertion guarantee to the capacity specified by the user by extending hash table with extra buckets when needed to accommodate the unlikely event of intensive hash collisions. In addition, the internal hashing algorithm was changed to use partial-key hashing to improve memory efficiency and lookup performance. * **Added lock free reader/writer concurrency to hash library (rte_hash).** Lock free reader/writer concurrency prevents the readers from getting blocked due to a preempted writer thread. This allows the hash library to be used in scenarios where the writer thread runs on the control plane. * **Added Traffic Pattern Aware Power Control Library.** Added an experimental library that extends the Power Library and provides empty_poll APIs. This feature measures how many times empty_polls are executed per core and uses the number of empty polls as a hint for system power management. See the :doc:`../prog_guide/power_man` section of the DPDK Programmers Guide document for more information. * **Added JSON power policy interface for containers.** Extended the Power Library and vm_power_manager sample app to allow power policies to be submitted via a FIFO using JSON formatted strings. Previously limited to Virtual Machines, this feature extends power policy functionality to containers and host applications that need to have their cores frequency controlled based on the rules contained in the policy. * **Added Telemetry API.** Added a new telemetry API which allows applications to transparently expose their telemetry in JSON via a UNIX socket. The JSON can be consumed by any Service Assurance agent, such as CollectD. * **Updated KNI kernel module, rte_kni library, and KNI sample application.** Updated the KNI kernel module with a new kernel module parameter, ``carrier=[on|off]`` to allow the user to control the default carrier state of the KNI kernel network interfaces. The default carrier state is now set to ``off``, so the interfaces cannot be used until the carrier state is set to ``on`` via ``rte_kni_update_link`` or by writing ``1`` to ``/sys/devices/virtual/net//carrier``. In previous versions the default carrier state was left undefined. See :doc:`../prog_guide/kernel_nic_interface` for more information. Also added the new API function ``rte_kni_update_link()`` to allow the user to set the carrier state of the KNI kernel network interface. Also added a new command line flag ``-m`` to the KNI sample application to monitor and automatically reflect the physical NIC carrier state to the KNI kernel network interface with the new ``rte_kni_update_link()`` API. See :doc:`../sample_app_ug/kernel_nic_interface` for more information. * **Added ability to switch queue deferred start flag on testpmd app.** Added a console command to testpmd app, giving ability to switch ``rx_deferred_start`` or ``tx_deferred_start`` flag of the specified queue of the specified port. The port must be stopped before the command call in order to reconfigure queues. * **Add a new sample application for vDPA.** The vdpa sample application creates vhost-user sockets by using the vDPA backend. vDPA stands for vhost Data Path Acceleration which utilizes virtio ring compatible devices to serve virtio driver directly to enable datapath acceleration. As vDPA driver can help to set up vhost datapath, this application doesn't need to launch dedicated worker threads for vhost enqueue/dequeue operations. * **Added cryptodev FIPS validation example application.** Added an example application to parse and perform symmetric cryptography computation to the NIST Cryptographic Algorithm Validation Program (CAVP) test vectors. * **Allow unit test binary to take parameters from the environment.** The unit test "test", or "dpdk-test", binary is often called from scripts, which can make passing additional parameters, such as a coremask, difficult. Support has been added to the application to allow it to take additional command-line parameter values from the ``DPDK_TEST_PARAMS`` environment variable to make this application easier to use. API Changes ----------- .. This section should contain API changes. Sample format: * Add a short 1-2 sentence description of the API change. Use fixed width quotes for ``function_names`` or ``struct_names``. Use the past tense. This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * eal: ``rte_memseg_list`` structure now has an additional flag indicating whether the memseg list is externally allocated. This will have implications for any users of memseg-walk-related functions, as they will now have to skip externally allocated segments in most cases if the intent is to only iterate over internal DPDK memory. In addition the ``socket_id`` parameter across the entire DPDK has gained additional meaning, as some socket ID's will now be representing externally allocated memory. No changes will be required for existing code as backwards compatibility will be kept, and those who do not use this feature will not see these extra socket ID's. Any new API's must not check socket ID parameters themselves, and must instead leave it to the memory subsystem to decide whether socket ID is a valid one. * eal: The following devargs functions, which were deprecated in 18.05, were removed in 18.11: ``rte_eal_parse_devargs_str()``, ``rte_eal_devargs_add()``, ``rte_eal_devargs_type_count()``, and ``rte_eal_devargs_dump()``. * eal: The parameters of the function ``rte_devargs_remove()`` have changed from bus and device names to ``struct rte_devargs``. * eal: The deprecated functions attach/detach were removed in 18.11. ``rte_eal_dev_attach`` can be replaced by ``rte_dev_probe`` or ``rte_eal_hotplug_add``. ``rte_eal_dev_detach`` can be replaced by ``rte_dev_remove`` or ``rte_eal_hotplug_remove``. * eal: The scope of ``rte_eal_hotplug_add()``/``rte_dev_probe()`` and ``rte_eal_hotplug_remove()``/``rte_dev_remove()`` has been extended. In the multi-process model, they will guarantee that the device is attached or detached on all processes. * mbuf: The ``__rte_mbuf_raw_free()`` and ``__rte_pktmbuf_prefree_seg()`` functions were deprecated since 17.05 and are replaced by ``rte_mbuf_raw_free()`` and ``rte_pktmbuf_prefree_seg()``. * ethdev: The deprecated functions attach/detach were removed in 18.11. ``rte_eth_dev_attach()`` can be replaced by ``RTE_ETH_FOREACH_MATCHING_DEV`` and ``rte_dev_probe()`` or ``rte_eal_hotplug_add()``. ``rte_eth_dev_detach()`` can be replaced by ``rte_dev_remove()`` or ``rte_eal_hotplug_remove()``. * ethdev: A call to ``rte_eth_dev_release_port()`` has been added in ``rte_eth_dev_close()``. As a consequence, a closed port is freed and seen as invalid because of its state ``RTE_ETH_DEV_UNUSED``. This new behavior is enabled per driver for a migration period. * A new device flag, ``RTE_ETH_DEV_NOLIVE_MAC_ADDR``, changes the order of actions inside ``rte_eth_dev_start()`` regarding MAC set. Some NICs do not support MAC changes once the port has started and with this new device flag the MAC can be properly configured in any case. This is particularly important for bonding. * The default behavior of CRC strip offload has changed in this release. Without any specific Rx offload flag, default behavior by a PMD is now to strip CRC. ``DEV_RX_OFFLOAD_CRC_STRIP`` offload flag has been removed. To request keeping CRC, application should set ``DEV_RX_OFFLOAD_KEEP_CRC`` Rx offload. * eventdev: The type of the second parameter to ``rte_event_eth_rx_adapter_caps_get()`` has been changed from uint8_t to uint16_t. * kni: By default, interface carrier status is ``off`` which means there won't be any traffic. It can be set to ``on`` via ``rte_kni_update_link()`` API or via ``sysfs`` interface: ``echo 1 > /sys/class/net/vEth0/carrier``. Note interface should be ``up`` to be able to read/write sysfs interface. When KNI sample application is used, ``-m`` parameter can be used to automatically update the carrier status for the interface. * kni: When ethtool support is enabled (``CONFIG_RTE_KNI_KMOD_ETHTOOL=y``) ethtool commands ``ETHTOOL_GSET & ETHTOOL_SSET`` are no longer supported for kernels that have ``ETHTOOL_GLINKSETTINGS & ETHTOOL_SLINKSETTINGS`` support. This means ``ethtool "-a|--show-pause", "-s|--change"`` won't work, and ``ethtool `` output will have less information. ABI Changes ----------- .. This section should contain ABI changes. Sample format: * Add a short 1-2 sentence description of the ABI change that was announced in the previous releases and made in this release. Use fixed width quotes for ``function_names`` or ``struct_names``. Use the past tense. This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * eal: added ``legacy_mem`` and ``single_file_segments`` values to ``rte_config`` structure on account of improving DPDK usability when using either ``--legacy-mem`` or ``--single-file-segments`` flags. * eal: EAL library ABI version was changed due to previously announced work on supporting external memory in DPDK: - Structure ``rte_memseg_list`` now has a new field indicating length of memory addressed by the segment list - Structure ``rte_memseg_list`` now has a new flag indicating whether the memseg list refers to external memory - Structure ``rte_malloc_heap`` now has a new field indicating socket ID the malloc heap belongs to - Structure ``rte_mem_config`` has had its ``malloc_heaps`` array resized from ``RTE_MAX_NUMA_NODES`` to ``RTE_MAX_HEAPS`` value - Structure ``rte_malloc_heap`` now has a ``heap_name`` member - Structure ``rte_eal_memconfig`` has been extended to contain next socket ID for externally allocated segments * eal: Added ``dma_maskbits`` to ``rte_mem_config`` for keeping the most restrictive DMA mask based on the devices addressing limitations. * eal: The structure ``rte_device`` has a new field to reference a ``rte_bus``. It thus changes the size of the ``struct rte_device`` and the inherited device structures of all buses. Shared Library Versions ----------------------- .. Update any library version updated in this release and prepend with a ``+`` sign, like this: librte_acl.so.2 + librte_cfgfile.so.2 librte_cmdline.so.2 This section is a comment. Do not overwrite or remove it. ========================================================= The libraries prepended with a plus sign were incremented in this version. .. code-block:: diff librte_acl.so.2 librte_bbdev.so.1 librte_bitratestats.so.2 librte_bpf.so.1 + librte_bus_dpaa.so.2 + librte_bus_fslmc.so.2 + librte_bus_ifpga.so.2 + librte_bus_pci.so.2 + librte_bus_vdev.so.2 + librte_bus_vmbus.so.2 librte_cfgfile.so.2 librte_cmdline.so.2 librte_compressdev.so.1 librte_cryptodev.so.5 librte_distributor.so.1 + librte_eal.so.9 librte_efd.so.1 + librte_ethdev.so.11 + librte_eventdev.so.6 librte_flow_classify.so.1 librte_gro.so.1 librte_gso.so.1 librte_hash.so.2 librte_ip_frag.so.1 librte_jobstats.so.1 librte_kni.so.2 librte_kvargs.so.1 librte_latencystats.so.1 librte_lpm.so.2 librte_mbuf.so.4 librte_member.so.1 librte_mempool.so.5 librte_meter.so.2 librte_metrics.so.1 librte_net.so.1 librte_pci.so.1 librte_pdump.so.2 librte_pipeline.so.3 librte_pmd_bnxt.so.2 librte_pmd_bond.so.2 librte_pmd_i40e.so.2 librte_pmd_ixgbe.so.2 librte_pmd_dpaa2_qdma.so.1 librte_pmd_ring.so.2 librte_pmd_softnic.so.1 librte_pmd_vhost.so.2 librte_port.so.3 librte_power.so.1 librte_rawdev.so.1 librte_reorder.so.1 librte_ring.so.2 librte_sched.so.1 librte_security.so.1 librte_table.so.3 librte_timer.so.1 librte_vhost.so.4 Known Issues ------------ .. This section should contain new known issues in this release. Sample format: * **Add title in present tense with full stop.** Add a short 1-2 sentence description of the known issue in the present tense. Add information on any known workarounds. This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * When using SR-IOV (VF) support with netvsc PMD and the Mellanox mlx5 bifurcated driver the Linux netvsc device must be brought up before the netvsc device is unbound and passed to the DPDK. * IBM Power8 is not supported in this release of DPDK. IBM Power9 is supported. * ``AVX-512`` support has been disabled for ``GCC`` builds [1] because of a crash [2]. This can affect ``native`` machine type build targets on the platforms that support ``AVX512F`` like ``Intel Skylake`` processors, and can cause a possible performance drop. The immediate workaround is to use ``clang`` compiler on these platforms. The issue has been identified as a GCC defect and reported to the GCC community [3]. Further actions will be taken based on the GCC defect result. - [1]: Commit 8d07c82b239f ("mk: disable gcc AVX512F support") - [2]: https://bugs.dpdk.org/show_bug.cgi?id=97 - [3]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88096 Tested Platforms ---------------- .. This section should contain a list of platforms that were tested with this release. The format is: * platform with combinations * List of CPU * List of OS * List of devices * Other relevant details... This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * Intel(R) platforms with Intel(R) NICs combinations * CPU * Intel(R) Atom(TM) CPU C3758 @ 2.20GHz * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz * Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz * Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz * OS: * CentOS 7.5 * Fedora 25 * Fedora 28 * FreeBSD 11.2 * Red Hat Enterprise Linux Server release 7.5 * Open SUSE 15 * Wind River Linux 8 * Ubuntu 14.04 * Ubuntu 16.04 * Ubuntu 16.10 * Ubuntu 17.10 * Ubuntu 18.04 * NICs: * Intel(R) 82599ES 10 Gigabit Ethernet Controller * Firmware version: 0x61bf0001 * Device id (pf/vf): 8086:10fb / 8086:10ed * Driver version: 5.2.3 (ixgbe) * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T * Firmware version: 0x800003e7 * Device id (pf/vf): 8086:15ad / 8086:15a8 * Driver version: 4.4.6 (ixgbe) * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G) * Firmware version: 6.01 0x80003221 * Device id (pf/vf): 8086:1572 / 8086:154c * Driver version: 2.4.6 (i40e) * Intel(R) Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G) * Firmware version: 3.33 0x80000fd5 0.0.0 * Device id (pf/vf): 8086:37d0 / 8086:37cd * Driver version: 2.4.6 (i40e) * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G) * Firmware version: 6.01 0x80003221 * Device id (pf/vf): 8086:158b / 8086:154c * Driver version: 2.4.6 (i40e) * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G) * Firmware version: 6.01 0x8000321c * Device id (pf/vf): 8086:1583 / 8086:154c * Driver version: 2.4.6 (i40e) * Intel(R) Corporation I350 Gigabit Network Connection * Firmware version: 1.63, 0x80000dda * Device id (pf/vf): 8086:1521 / 8086:1520 * Driver version: 5.4.0-k (igb) * Intel(R) platforms with Mellanox(R) NICs combinations * CPU: * Intel(R) Xeon(R) Gold 6154 CPU @ 3.00GHz * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz * Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz * Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz * OS: * Red Hat Enterprise Linux Server release 7.6 (Maipo) * Red Hat Enterprise Linux Server release 7.5 (Maipo) * Red Hat Enterprise Linux Server release 7.4 (Maipo) * Red Hat Enterprise Linux Server release 7.3 (Maipo) * Red Hat Enterprise Linux Server release 7.2 (Maipo) * Ubuntu 18.10 * Ubuntu 18.04 * Ubuntu 17.10 * Ubuntu 16.04 * SUSE Linux Enterprise Server 15 * MLNX_OFED: 4.4-2.0.1.0 * MLNX_OFED: 4.5-0.3.1.0 * NICs: * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1007 * Firmware version: 2.42.5000 * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.23.8022 and above * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1015 * Firmware version: 14.23.8022 and above * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1015 * Firmware version: 14.23.8022 and above * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1017 * Firmware version: 16.23.8022 and above * Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G) * Host interface: PCI Express 4.0 x16 * Device ID: 15b3:1019 * Firmware version: 16.23.8022 and above * ARM platforms with Mellanox(R) NICs combinations * CPU: * Qualcomm ARM 1.1 2500MHz * OS: * Red Hat Enterprise Linux Server release 7.5 (Maipo) * NICs: * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1015 * Firmware version: 14.24.0220 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1017 * Firmware version: 16.24.0220 * Mellanox(R) BlueField SmartNIC * Mellanox(R) BlueField SmartNIC MT416842 (2x25G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:a2d2 * Firmware version: 18.24.0246 * SoC ARM cores running OS: * CentOS Linux release 7.4.1708 (AltArch) * MLNX_OFED 4.4-2.5.3.0 * DPDK application running on ARM cores inside SmartNIC * ARM SoC combinations from NXP (with integrated NICs) * SoC: * NXP/Freescale QorIQ LS1046A with ARM Cortex A72 * NXP/Freescale QorIQ LS2088A with ARM Cortex A72 * OS: * Ubuntu 18.04.1 LTS with NXP QorIQ LSDK 1809 support packages * Ubuntu 16.04.3 LTS with NXP QorIQ LSDK 1803 support packages 18.11.1 Release Notes ---------------------- 18.11.1 Fixes ~~~~~~~~~~~~~ * app/bbdev: fix return value check * app/eventdev: detect deadlock for timer event producer * app/pdump: fix vdev cleanup * app/testpmd: expand RED queue thresholds to 64 bits * app/testpmd: fix MPLS BoS bit default value * app/testpmd: fix MPLSoGRE encapsulation * app/testpmd: fix MPLSoUDP encapsulation * app/testpmd: fix quit to stop all ports before close * app/testpmd: fix Tx metadata show command * bb/turbo_sw: fix dynamic linking * build: fix meson check for binutils 2.30 * build: fix variable name in dependency error message * build: mention -march in pkg-config description * build: use static deps for pkg-config libs.private * bus/dpaa: do nothing if bus not present * bus/dpaa: fix logical to physical core affine logic * bus/fslmc: fix parse method for bus devices * bus/fslmc: fix ring mode to use correct cache settings * bus/fslmc: fix to convert error msg to warning * bus/fslmc: fix to reset portal memory before use * bus/fslmc: fix to use correct physical core for logical core * bus/ifpga: fix AFU probe failure handler * bus/ifpga: fix build for cpp applications * bus/ifpga: fix forcing optional devargs * bus/vmbus: fix race in subchannel creation * common/qat: remove check of valid firmware response * compressdev: fix structure comment * compress/qat: fix dequeue error counter * compress/qat: fix returned status on overflow * compress/qat: fix return on building request error * config: enable C11 memory model for armv8 with meson * crypto/dpaa2_sec: fix FLC address for physical mode * crypto/qat: fix block size error handling * crypto/qat: fix digest in wireless auth case * crypto/qat: fix message for CCM when setting unused counter * crypto/qat: fix message for NULL algo setting unused counter * devtools: fix build check for whether meson has run * devtools: fix return of forbidden addition checks * devtools: fix symbol check when adding experimental section * devtools: fix wrong headline lowercase for arm * doc: add dependency for PDF in contributing guide * doc: add GCM AAD limitation in qat guide * doc: add GRO limitations in programmers guide * doc: add missing loopback option in testpmd guide * doc: clarify libnuma requirement for NUMA systems * doc: fix AESNI_MB guide * doc: fix a parameter name in testpmd guide * doc: fix a typo in power management guide * doc: fix a typo in testpmd guide * doc: fix a typo in testpmd guide * doc: fix flow action command names in testpmd guide * doc: fix garbage text in generated HTML guides * doc: fix ifc naming * doc: fix MAC address rewrite actions in prog guide * doc: fix references in power management guide * doc: remove note on memory mode limitation in multi-process * drivers/crypto: fix PMDs memory leak * drivers: fix sprintf with snprintf * drivers/net: fix several Tx prepare functions * eal/bsd: remove clean up of files at startup * eal: check string parameter lengths * eal: clean up unused files on initialization * eal: close multi-process socket during cleanup * eal: fix build of external app with clang on armv8 * eal: fix clang build with intrinsics forced * eal: fix core number validation * eal: fix detection of duplicate option register * eal: fix leak on multi-process request error * eal: fix log level of error in option register * eal: fix missing newline in a log * eal: fix out of bound access when no CPU available * eal: fix strdup usages in internal config * eal/linux: fix parsing zero socket memory and limits * efd: fix tail queue leak * ethdev: declare Tx prepare API as not experimental * ethdev: fix errno to have positive value * ethdev: fix typo in queue setup error log * eventdev: fix error log in eth Rx adapter * eventdev: fix eth Tx adapter queue count checks * eventdev: fix xstats documentation typo * eventdev: remove redundant timer adapter function prototypes * examples/bond: fix crash when there is no active slave * examples/bond: fix initialization order * examples/flow_filtering: fix example documentation * examples/ipsec-secgw: fix crypto-op might never get dequeued * examples/ipsec-secgw: fix inbound SA checking * examples/ipsec-secgw: fix outbound codepath for single SA * examples/ipsec-secgw: make local variables static * examples/kni: fix crash while handling userspace request * examples/tep_term: remove unused constant * examples/vhost_crypto: fix bracket * examples/vhost: fix a typo * examples/vhost: fix path allocation failure handling * gro: check invalid TCP header length * gro: fix overflow of payload length calculation * gso: fix VxLAN/GRE tunnel checks * hash: fix out-of-bound write while freeing key slot * hash: fix return of bulk lookup * ip_frag: fix IPv6 when MTU sizes not aligned to 8 bytes * kni: fix build for dev_open in Linux 5.0 * kni: fix build for igb_ndo_bridge_setlink in Linux 5.0 * kni: fix build on RHEL 8 * kni: fix build on RHEL8 for arm and Power9 * malloc: fix deadlock when reading stats * malloc: fix duplicate mem event notification * malloc: fix finding maximum contiguous IOVA size * malloc: make alignment requirements more stringent * malloc: notify primary process about hotplug in secondary * mem: check for memfd support in segment fd API * mem: fix segment fd API error code for external segment * mem: fix storing old policy * mem: fix variable shadowing * memzone: fix unlock on initialization failure * mk: do not install meson.build in usertools * mk: fix scope of disabling AVX512F support * net/af_packet: fix setting MTU decrements sockaddr twice * net/avf/base: fix comment referencing internal data * net/bnx2x: cleanup info logs * net/bnx2x: fix segfaults due to stale interrupt status * net/bonding: fix possible null pointer reference * net/bonding: fix reset active slave * net/cxgbe: fix control queue mbuf pool naming convention * net/cxgbe: fix overlapping regions in TID table * net/cxgbe: skip parsing match items with no spec * net/dpaa2: fix bad check for not-null * net/dpaa2: fix device init for secondary process * net/dpaa: fix secondary process * net/ena: add reset reason in Rx error * net/ena: add supported RSS offloads types * net/ena: destroy queues if start failed * net/ena: do not reconfigure queues on reset * net/ena: fix cleanup for out of order packets * net/ena: fix dev init with multi-process * net/ena: fix errno to positive value * net/ena: fix invalid reference to variable in union * net/ena: skip packet with wrong request id * net/ena: update completion queue after cleanup * net/enic: remove useless include * net: fix underflow for checksum of invalid IPv4 packets * net/fm10k: fix internal switch initial status * net/i40e: clear VF reset flags after reset * net/i40e: fix config name in comment * net/i40e: fix get RSS conf * net/i40e: fix getting RSS configuration * net/i40e: fix overwriting RSS RETA * net/i40e: fix port close * net/i40e: fix queue region DCB configure * net/i40e: fix statistics * net/i40e: fix statistics inconsistency * net/i40e: fix using recovery mode firmware * net/i40e: fix VF overwrite PF RSS LUT for X722 * net/i40e: perform basic validation on VF messages * net/i40e: remove redundant reset of queue number * net/i40e: revert fix offload not supported mask * net/ifc: store only registered device instance * net/ifcvf: fix typo on struct name * net/igb: fix LSC interrupt when using MSI-X * net/ixgbe/base: add LHA ID * net/ixgbe: fix crash on remove * net/ixgbe: fix over using multicast table for VF * net/ixgbe: fix overwriting RSS RETA * net/ixgbe: fix Rx LRO capability offload for x550 * net/mlx5: fix build for armv8 * net/mlx5: fix deprecated library API for Rx padding * net/mlx5: fix function documentation * net/mlx5: fix instruction hotspot on replenishing Rx buffer * net/mlx5: fix Multi-Packet RQ mempool free * net/mlx5: fix Rx packet padding * net/mlx5: fix shared counter allocation logic * net/mlx5: fix TC rule handle assignment * net/mlx5: fix typos and code style * net/mlx5: fix validation of Rx queue number * net/mlx5: fix VXLAN port registration race condition * net/mlx5: fix VXLAN without decap action for E-Switch * net/mlx5: remove checks for outer tunnel items on E-Switch * net/mlx5: support ethernet type for tunnels on E-Switch * net/mlx5: support tunnel inner items on E-Switch * net/mlx5: validate ethernet type on E-Switch * net/mlx5: validate tunnel inner items on E-Switch * net/netvsc: disable multi-queue on older servers * net/netvsc: enable SR-IOV * net/netvsc: fix probe when VF not found * net/netvsc: fix transmit descriptor pool cleanup * net/qede: fix performance bottleneck in Rx path * net/qede: remove prefetch in Tx path * net/sfc: add missing header guard to TSO header file * net/sfc/base: fix Tx descriptor max number check * net/sfc: discard last seen VLAN TCI if Tx packet is dropped * net/sfc: fix crash in EF10 TSO if no payload * net/sfc: fix datapath name references in logs * net/sfc: fix port ID log * net/sfc: fix Rx packets counter * net/sfc: fix typo in preprocessor check * net/sfc: fix VF error/missed stats mapping * net/sfc: pass HW Tx queue index on creation * net/tap: add buffer overflow checks before checksum * net/tap: allow full length names * net/tap: fix possible uninitialized variable access * net/tap: let kernel choose tun device name * net/vhost: fix double free of MAC address * net/virtio: add barrier before reading the flags * net/virtio-user: fix used ring in cvq handling * raw/ifpga: fix memory leak * Revert "net/mlx5: fix instruction hotspot on replenishing Rx buffer" * sched: fix memory leak on init failure * telemetry: fix using ports of different types * test: check zero socket memory as valid * test/crypto: fix misleading trace message * test/fbarray: add to meson * test/hash: fix perf result * test/mem: add external mem autotest to meson * test/metrics: fix a negative case * timer: fix race condition * version: 18.11.1-rc1 * version: 18.11.1-rc2 * vfio: allow secondary process to query IOMMU type * vfio: do not unregister callback in secondary process * vfio: fix error message * vhost/crypto: fix possible dead loop * vhost/crypto: fix possible out of bound access * vhost: enforce avail index and desc read ordering * vhost: enforce desc flags and content read ordering * vhost: ensure event idx is mapped when negotiated * vhost: fix access for indirect descriptors * vhost: fix crash after mmap failure * vhost: fix deadlock in driver unregister * vhost: fix double read of descriptor flags * vhost: fix memory leak on realloc failure * vhost: fix possible dead loop in vector filling * vhost: fix possible out of bound access in vector filling * vhost: fix race condition when adding fd in the fdset 18.11.1 Validation ~~~~~~~~~~~~~~~~~~ * Intel(R) Testing * 18.11.1 LTS release passed the basic Intel(R) NIC(ixgbe and i40e) testing * cryptodev * virtio and Intel NIC/virtio performance * vlan * vxlan * Jumbo frames * Generic filter * Flow director * PF and VF * Mellanox(R) Testing * Basic functionality * Send and receive multiple types of traffic * testpmd xstats counter test * testpmd timestamp test * Changing/checking link status through testpmd * RTE flow and flow_director tests * Some RSS tests * VLAN stripping and insertion tests * Checksum and TSO tests * ptype tests * Port interrupt testing * Multi-process testing * Drivers tested * MLNX_OFED_LINUX-4.5-1.0.1.0 * MLNX_OFED_LINUX-4.4-2.0.1.0 * rdma-core upstream commit 0ea43f6 * Tested NICs * ConnectX-4 Lx (fw 14.24.1000) * ConnectX-5 (fw 16.24.1000) * OSes tested * RHEL7.4 (kernel 5.0.0) * RHEL7.4 (kernel 3.10.0-693.el7.x86_64) * OVS Testing Intel(R) * OVS testing against head OVS Master and OVS 2.11.0 with VSPERF * Tested with i40e (X710), ixgbe (82599ES) and igb(I350) devices * PVP * P2P * Multiqueue * Vhostuserclient reconnect * Vhost cross-NUMA awareness * Jumbo frames * Rate limiting * QoS policer * Microsoft(R) Azure Testing * SRIOV/Failsafe * DPDK-OVS * Red Hat(R) Virtualization Testing * PF * VF * vhost single/multi queues and cross-NUMA * vhostclient reconnect * vhost live migration with single/multi queues and cross-NUMA 18.11.2 Release Notes ---------------------- 18.11.2 Fixes ~~~~~~~~~~~~~ * acl: fix compiler flags with meson and AVX2 runtime * app/bbdev: replace sprintf with snprintf or strlcpy * app/crypto-perf: check range of socket id * app/pdump: remove only created vdevs * app/test: fix build with musl libc * app/test: fix flags with meson * app/test: fix sprintf with strlcat * app/testpmd: add missing newline when showing statistics * app/testpmd: extend forwarding statistics to 64 bits * app/testpmd: fix a typo in log message * app/testpmd: fix help info for interactive commands * app/testpmd: fix hex string parser support for flow API * app/testpmd: fix mempool free on exit * app/testpmd: fix offload flags after port config * app/testpmd: fix return value check * app/testpmd: fix stdout flush after printing stats * app/testpmd: fix Tx QinQ set * app/testpmd: fix Tx VLAN and QinQ dependency * app/testpmd: fix typo in comment * app/testpmd: fix unintentional integer overflow * app/testpmd: fix variable use before null check * app/testpmd: remove unused field from port struct * app/testpmd: remove useless casts on statistics * bitrate: fix unchecked return value * build: fix crash by disabling AVX512 with binutils 2.31 * build: fix meson binutils workaround * build: fix ninja install on FreeBSD * build: remove meson warning for Arm * build: use default flags for default Arm machine * bus/dpaa: fix Rx discard register mask * bus/fslmc: decrease log level for unsupported devices * bus/fslmc: fix build with musl libc * bus/fslmc: fix warning with GCC 9 * bus/fslmc: fix warning with GCC 9 * bus/fslmc: remove unused include of error.h * bus/vdev: fix debug message on probing * bus/vdev: fix hotplug twice * bus/vmbus: fix check for mmap failure * bus/vmbus: fix resource leak on error * bus/vmbus: fix secondary process setup * bus/vmbus: map ring in secondary process * bus/vmbus: stop mapping if empty resource found * cfgfile: replace strcat with strlcat * ci: add a distinguisher to the extra Travis builds * ci: enable ccache in Travis * ci: introduce Travis builds for GitHub repositories * common/cpt: fix null auth only * compress/isal: fix compression stream initialization * compress/isal: fix getting information about CPU * compress/qat: fix setup inter buffers * crypto/caam_jr: fix memory leak and illegal access * crypto/caam_jr: fix shared descriptor endianness * crypto/caam_jr: fix total length in auth only s/g * cryptodev: fix driver name comparison * crypto/dpaa2_sec: fix offset calculation for GCM * crypto/dpaa2_sec: fix session clearing * crypto/dpaa: fix session destroy * crypto/kasumi: fix dependency check * crypto/openssl: fix big numbers after computations * crypto/openssl: fix modexp * crypto/qat: fix null cipher algo for non 8-byte multiple * crypto/snow3g: add to meson build * crypto/virtio: fix IV offset * crypto/virtio: use local log type * crypto/zuc: fix dependency check * devtools: accept experimental symbol promotion * devtools: add libelf dependency to build test * devtools: fix build test on FreeBSD * devtools: fix check of symbol added as stable API * devtools: fix result of svg include check * devtools: fix symbol name in check log * devtools: fix test of some build options * devtools: skip meson build for missing compilers * devtools: support older compilers with meson test * devtools: test build of zlib PMD * doc: add flow API to qede NIC features * doc: add missing algorithms for AESNI-MB PMD * doc: fix ABI check script examples * doc: fix a minor typo in testpmd guide * doc: fix broken link in LPM guide * doc: fix examples in bonding guide * doc: fix formatting in testpmd guide * doc: fix heading levels in bbdev test guide * doc: fix interactive commands in testpmd guide * doc: fix JSON interface for power sample * doc: fix link in Linux getting started guide * doc: fix links to doxygen and sphinx sites * doc: fix missing asymmetric crypto table * doc: fix PCI whitelist typo in prog guide * doc: fix spelling in testpmd guide * doc: fix spelling reported by aspell in comments * doc: fix spelling reported by aspell in guides * doc: fix tag for inner RSS feature * doc: fix two typos in contributing guide * doc: fix typo in IPC guide * doc: fix typo in mlx5 guide * doc: fix typos in mlx5 guide * doc: fix typos in testpmd user guide * doc: remove reference to rte.doc.mk in programmers guide * doc: update cross Arm toolchain in Linux guide * drivers/event: disable OcteonTx for buggy Arm compilers * drivers: fix SPDX license id consistency * drivers/net: fix possible overflow using strlcat * drivers/net: fix shifting 32-bit signed variable 31 times * drivers/qat: fix queue pair NUMA node * eal: fix check when retrieving current CPU affinity * eal: fix cleanup in no-shconf mode * eal: fix control threads pinnning * eal: fix core list validation with disabled cores * eal: fix formatting of hotplug error message * eal: fix typo in comment of vector function * eal: initialize alarms early * eal/linux: fix log levels for pagemap reading failure * eal/linux: remove thread ID from debug message * eal/ppc: fix global memory barrier * eal: remove dead code in core list parsing * eal: restrict control threads to startup CPU affinity * eal: support strlcat function * eal: tighten permissions on shared memory files * ethdev: fix a typo * ethdev: fix method name in doxygen comment * ethdev: fix typo in error messages * ethdev: remove unused variable * eventdev: fix crypto adapter * eventdev: fix Rx adapter event flush * eventdev: update references to removed function * event/dsw: fix capability flags * event/dsw: ignore scheduling type for single-link queues * event/opdl: replace sprintf with snprintf * event/sw: fix enqueue checks in self-test * examples/ethtool: fix two typos * examples/fips_validation: fix CMAC test * examples/ip_pipeline: disable build when no epoll * examples/ipsec-secgw: fix AES-CTR block size * examples/ipsec-secgw: fix build error log * examples/ipsec-secgw: fix debug logs * examples/ipsec-secgw: fix SPD no-match case * examples/l2fwd-cat: fix build on FreeBSD * examples/multi_process: fix buffer underrun * examples/power: fix buffer overrun * examples/power: fix build with some disabled PMDs * examples/power: fix json null termination * examples/power: fix overflowed value * examples/power: fix resource leak * examples/power: fix string null termination * examples/power: fix string overflow * examples/power: fix unreachable VF MAC init * examples/vhost_crypto: fix dependency on vhost library * examples/vhost_scsi: fix null-check for parameter * hash: fix doc about thread/process safety * hash: fix position returned in free slots * hash: fix total entries count * ipc: add warnings about correct API usage * ipc: add warnings about not using IPC with memory API * ipc: fix memory leak on request failure * ipc: fix send error handling * ipc: handle more invalid parameter cases * ipc: harden message receive * ipc: unlock on failure * kni: fix build with Linux 5.1 * kni: fix type for MAC address * maintainers: update for IBM POWER * malloc: fix documentation of realloc function * malloc: fix IPC message initialization * mbuf: fix a typo * mbuf: update Tx VLAN and QinQ flags documentation * mem: limit use of address hint * mempool/dpaa2: fix continuous print on empty pool * mem: warn user when running without NUMA support * mk: disable packed member pointer warning for telemetry * mk: disable warning for packed member pointer * mk: fix AVX512 disabled warning on non x86 * mk: fix build of shared library with libbsd * net/atlantic: bad logic with offsets talking with firmware * net/atlantic: eeprom get/set should consider offset * net/atlantic: eliminate excessive log levels on Rx/Tx * net/atlantic: enable broadcast traffic * net/atlantic: error handling for mailbox access * net/atlantic: extra line at eof * net/atlantic: fix buffer overflow * net/atlantic: fix EEPROM get for small and uneven lengths * net/atlantic: fix link configuration * net/atlantic: fix max eeprom size * net/atlantic: fix missing VLAN filter offload * net/atlantic: fix negative error codes * net/atlantic: fix xstats return * net/atlantic: flow control settings synchronization on rx * net/atlantic: remove extra checks for error codes * net/atlantic: remove unused variable * net/atlantic: use capability bits to detect eeprom access * net/atlantic: validity check for eeprom dev address * net/avf: fix admin queue interrupt for ICE * net/bnx2x: fix DMAE timeout * net/bnx2x: fix memory leak * net/bnx2x: fix MTU for jumbo frame * net/bnx2x: fix optic module verification * net/bnx2x: fix race for periodic flags * net/bnx2x: fix ramrod timeout * net/bnxt: fix big endian build * net/bnxt: fix Rx VLAN offload flags * net/bnxt: silence IOVA warnings * net/bnxt: support IOVA VA mode * net/bnxt: suppress spurious error log * net/bonding: avoid warning for invalid port * net/bonding: fix buffer length when printing strings * net/bonding: fix LACP negotiation * net/bonding: fix link status * net/bonding: fix packet count type for LACP * net/bonding: fix port id types * net/bonding: fix queue index types * net/bonding: fix slave id types * net/bonding: fix slave Tx burst for mode 4 * net/bonding: fix Tx in 802.3ad mode * net/bonding: fix values of descriptor limits * net/cxgbe: fix colliding function names * net/cxgbe: fix missing checksum flags and packet type * net/cxgbe: update Chelsio T5/T6 NIC device ids * net/enetc: fix big endian build and buffer allocation * net/enetc: fix crash at high speed traffic * net/enetc: fix SMMU unhandled context fault * net/enic: allow flow mark ID 0 * net/enic: check for unsupported flow item types * net/enic: fix endianness in VLAN match * net/enic: fix flow director SCTP matching * net/enic: fix inner packet matching * net/enic: fix max MTU calculation * net/enic: fix SCTP match for flow API * net/enic: fix VLAN inner type matching for old hardware * net/enic: fix VXLAN match * net/enic: move arguments into struct * net/enic: reset VXLAN port regardless of overlay offload * net: fix Tx VLAN flag for offload emulation * net/fm10k: fix VLAN strip offload flag * net/i40e: fix dereference before check when getting EEPROM * net/i40e: fix dereference before null check in mbuf release * net/i40e: fix link speed for X722 * net/i40e: fix logging on VF close * net/i40e: fix queue number check * net/i40e: fix scattered Rx enabling * net/i40e: fix time sync for 25G * net/i40e: forbid two RSS flow rules * net/i40e: log when provided RSS key is not valid * net/iavf: fix info get * net/ixgbe: fix warning with GCC 9 * net/ixgbe: restore VLAN filter for VF * net/kni: fix return value check * net/mlx4: change device reference for secondary process * net/mlx4: fix memory region cleanup * net/mlx5: check Tx queue size overflow * net/mlx5: fix comments mixing Rx and Tx * net/mlx5: fix errno typos in comments * net/mlx5: fix external memory registration * net/mlx5: fix flow priorities probing error path * net/mlx5: fix hex dump of error completion * net/mlx5: fix instruction hotspot on replenishing Rx buffer * net/mlx5: fix max number of queues for NEON Tx * net/mlx5: fix memory event on secondary process * net/mlx5: fix memory region cleanup * net/mlx5: fix Multi-Packet RQ mempool name * net/mlx5: fix packet inline on Tx queue wraparound * net/mlx5: fix release of Rx queue object * net/mlx5: fix RSS validation function * net/mlx5: fix sync when handling Tx completions * net/mlx5: fix Tx metadata for multi-segment packet * net/mlx: prefix private structure * net/mlx: remove debug messages on datapath * net/netvsc: fix include of fcntl.h * net/netvsc: fix VF support with secondary process * net/netvsc: remove useless condition * net/netvsc: reset mbuf port on VF Rx * net/nfp: check return value * net/nfp: fix build with musl libc * net/nfp: fix file descriptor check * net/nfp: fix memory leak * net/nfp: fix possible buffer overflow * net/nfp: fix potential integer overflow * net/nfp: fix RSS query * net/nfp: fix setting MAC address * net/octeontx: fix vdev name * net/pcap: fix memory leak * net/qede: fix Rx packet drop * net/qede: fix Tx packet prepare for tunnel packets * net/qede: support IOVA VA mode * net/ring: avoid hard-coded length * net/ring: check length of ring name * net/ring: fix coding style * net/ring: fix return value check * net/ring: use calloc style where appropriate * net/sfc: fix logging from secondary process * net/sfc: fix MTU change to check Rx scatter consistency * net/sfc: fix speed capabilities reported in device info * net/sfc: improve TSO header length check in EF10 datapath * net/sfc: improve TSO header length check in EFX datapath * net/sfc: log port ID as 16-bit unsigned integer on panic * net/sfc: remove control path logging from Rx queue count * net/softnic: fix possible buffer overflow * net/tap: fix getting max iovec * net/tap: fix memory leak on IPC request * net/tap: fix multi process reply buffer * net/tap: fix multi-process request * net/tap: fix potential IPC buffer overrun * net/vdev_netvsc: fix device cast * net/virtio: add barrier in interrupt enable * net/virtio: add barriers for extra descriptors on Rx split * net/virtio: fix buffer leak on VLAN insert * net/virtio: fix dangling pointer on failure * net/virtio: fix duplicate naming of include guard * net/virtio: fix in-order Tx path for split ring * net/virtio: remove forward declaration * net/virtio: remove useless condition * net/virtio: set offload flag for jumbo frames * net/virtio-user: fix multi-process support * net/virtio-user: fix multiqueue with vhost kernel * net/virtio-user: fix return value check * net/vmxnet3: add VLAN filter capability * power: fix cache line alignment * power: fix governor storage to trim newlines * power: fix thread-safety environment modification * power: remove unused variable * raw/dpaa2_cmdif: fix warnings with GCC 9 * raw/dpaa2_qdma: fix spin lock release * raw/dpaa2_qdma: fix to support multiprocess execution * raw/ifpga: fix file descriptor leak in error path * raw/ifpga: modify log output * raw/skeleton: fix warnings with GCC 9 * Revert "app/testpmd: fix offload flags after port config" * ring: enforce reading tail before slots * ring: fix an error message * ring: fix namesize macro documentation block * rwlock: reimplement with atomic builtins * spinlock: reimplement with atomic one-way barrier * table: fix arm64 hash function selection * telemetry: fix mapping of statistics * test/barrier: fix allocation check * test/barrier: fix for Power CPUs * test/barrier: fix typo in log * test/bonding: fix MAC assignment for re-run * test: clean remaining trace of devargs autotest * test/compress: fix missing header include * test/crypto: fix duplicate id used by CCP device * test/crypto: fix possible overflow using strlcat * test/distributor: replace sprintf with strlcpy * test/event: replace sprintf with snprintf * test/hash: replace sprintf with snprintf * test/pmd_perf: fix the way to drain the port * test/spinlock: amortize the cost of getting time * test/spinlock: remove delay for correct benchmarking * version: 18.11.2-rc1 * vfio: document multiprocess limitation for container API * vhost/crypto: fix parens * vhost: fix device leak on connection add failure * vhost: fix interrupt suppression for the split ring * vhost: fix null pointer checking * vhost: fix passing destroyed device to destroy callback * vhost: fix potential use-after-free for memory region * vhost: fix potential use-after-free for zero copy mbuf * vhost: fix silent queue enabling with legacy guests * vhost: fix sprintf with snprintf * vhost: prevent disabled rings to be processed with zero-copy * vhost: restore mbuf first when freeing zmbuf 18.11.2 Validation ~~~~~~~~~~~~~~~~~~ * IBM(R) Testing * Tests run * Single port stability test using l3fwd (16 cpus) and TRex * 64 and 1500 byte packets at a 0.0% drop rate for 4 hours each * System tested * IBM Power9 Model 8335-101 CPU: 2.3 (pvr 004e 1203) * Tested NICs * ConnectX-5 (fw 16.23.1020). * OS Tested * Ubuntu 18.04.2 LTS (kernel 4.15.0-47-generic) * Intel(R) Openvswitch Testing * OVS testing against head OVS Master and OVS 2.11.0 with VSPERF * Tested NICs * i40e (X710) and i40eVF * ixgbe (82599ES) and ixgbeVF * igb (I350) and igbVF * Functionality * P2P * PVP * PVVP * PV-PV in parallel * Hotplug * Multiqueue * Vhostuserclient reconnect * Vhost cross-NUMA awareness * Jumbo frames * Rate limiting * QoS policer * Mellanox(R) Testing * Basic functionality * Send and receive multiple types of traffic * testpmd xstats counter test * testpmd timestamp test * Changing/checking link status through testpmd * RTE flow and flow_director tests * Some RSS tests * VLAN stripping and insertion tests * Checksum and TSO tests * ptype tests * Port interrupt testing * Multi-process testing * OFED versions tested * MLNX_OFED_LINUX-4.5-1.0.1.0 * MLNX_OFED_LINUX-4.6-1.0.1.1 * Tested NICs * ConnectX-4 Lx (fw 14.25.1010). * ConnectX-5 (fw 16.25.1010). * OS tested * RHEL7.4 (kernel 3.10.0-693.el7.x86_64). * Microsoft(R) Azure Testing * Images * Canonical UbuntuServer 16.04-LTS latest * Canonical UbuntuServer 18.04-DAILY-LTS latest * RedHat RHEL 7-RAW latest * RedHat RHEL 7.5 latest * Openlogic CentOS 7.5 latest * SUSE SLES 15 latest * Drivers * Mellanox and netvsc poll-mode drivers * Functionality * VM to VM traffic * SRIOV/Failsafe * Single and multicore performance * Red Hat(R) Testing * RHEL 7 and RHEL 8 * Functionality * PF * VF * vhost single/multi queues and cross-NUMA * vhostclient reconnect * vhost live migration with single/multi queues and cross-NUMA * OVS PVP * Tested NICs * X540-AT2 NIC(ixgbe, 10G) * Intel(R) Testing * Basic Intel(R) NIC(ixgbe and i40e) testing * vlan * vxlan * Jumbo frames * Generic filter * Flow director * PF and VF * Intel NIC single core/NIC performance * Basic cryptodev and virtio testing * cryptodev * vhost/virtio basic loopback, PVP and performance test 18.11.2 Known Issues ~~~~~~~~~~~~~~~~~~~~ * DPDK 18.11.2 contains fixes up to DPDK v19.05. Issues identified/fixed in DPDK master branch after DPDK v19.05 may be present in DPDK 18.11.2 * testpmd: queue specific offloads may be over-written by the default config. This is not a regression from earlier DPDK 18.11 releases. Fixes skipped and status unresolved ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * dcfbc594f net/iavf: fix queue interrupt for ice (18.02) * 281bd1aa3 net/iavf: fix stats reset (18.02) * fe252fb69 test/rwlock: benchmark on all available cores (1.2.3r0) * 6fef1ae4f test/rwlock: amortize the cost of getting time (1.2.3r0)