/* SPDX-License-Identifier: BSD-3-Clause * Copyright(c) 2018 Ericsson AB */ #ifndef _DSW_EVDEV_H_ #define _DSW_EVDEV_H_ #include #include #define DSW_PMD_NAME RTE_STR(event_dsw) /* Code changes are required to allow more ports. */ #define DSW_MAX_PORTS (64) #define DSW_MAX_PORT_DEQUEUE_DEPTH (128) #define DSW_MAX_PORT_ENQUEUE_DEPTH (128) #define DSW_MAX_PORT_OUT_BUFFER (32) #define DSW_MAX_QUEUES (16) #define DSW_MAX_EVENTS (16384) /* Code changes are required to allow more flows than 32k. */ #define DSW_MAX_FLOWS_BITS (15) #define DSW_MAX_FLOWS (1<<(DSW_MAX_FLOWS_BITS)) #define DSW_MAX_FLOWS_MASK (DSW_MAX_FLOWS-1) /* Eventdev RTE_SCHED_TYPE_PARALLEL doesn't have a concept of flows, * but the 'dsw' scheduler (more or less) randomly assign flow id to * events on parallel queues, to be able to reuse some of the * migration mechanism and scheduling logic from * RTE_SCHED_TYPE_ATOMIC. By moving one of the parallel "flows" from a * particular port, the likely-hood of events being scheduled to this * port is reduced, and thus a kind of statistical load balancing is * achieved. */ #define DSW_PARALLEL_FLOWS (1024) /* 'Background tasks' are polling the control rings for * * migration-related messages, or flush the output buffer (so * buffered events doesn't linger too long). Shouldn't be too low, * since the system won't benefit from the 'batching' effects from * the output buffer, and shouldn't be too high, since it will make * buffered events linger too long in case the port goes idle. */ #define DSW_MAX_PORT_OPS_PER_BG_TASK (128) /* Avoid making small 'loans' from the central in-flight event credit * pool, to improve efficiency. */ #define DSW_MIN_CREDIT_LOAN (64) #define DSW_PORT_MAX_CREDITS (2*DSW_MIN_CREDIT_LOAN) #define DSW_PORT_MIN_CREDITS (DSW_MIN_CREDIT_LOAN) /* The rings are dimensioned so that all in-flight events can reside * on any one of the port rings, to avoid the trouble of having to * care about the case where there's no room on the destination port's * input ring. */ #define DSW_IN_RING_SIZE (DSW_MAX_EVENTS) #define DSW_MAX_LOAD (INT16_MAX) #define DSW_LOAD_FROM_PERCENT(x) ((int16_t)(((x)*DSW_MAX_LOAD)/100)) #define DSW_LOAD_TO_PERCENT(x) ((100*x)/DSW_MAX_LOAD) /* The thought behind keeping the load update interval shorter than * the migration interval is that the load from newly migrated flows * should 'show up' on the load measurement before new migrations are * considered. This is to avoid having too many flows, from too many * source ports, to be migrated too quickly to a lightly loaded port - * in particular since this might cause the system to oscillate. */ #define DSW_LOAD_UPDATE_INTERVAL (DSW_MIGRATION_INTERVAL/4) #define DSW_OLD_LOAD_WEIGHT (1) /* The minimum time (in us) between two flow migrations. What puts an * upper limit on the actual migration rate is primarily the pace in * which the ports send and receive control messages, which in turn is * largely a function of how much cycles are spent the processing of * an event burst. */ #define DSW_MIGRATION_INTERVAL (1000) #define DSW_MIN_SOURCE_LOAD_FOR_MIGRATION (DSW_LOAD_FROM_PERCENT(70)) #define DSW_MAX_TARGET_LOAD_FOR_MIGRATION (DSW_LOAD_FROM_PERCENT(95)) #define DSW_MAX_EVENTS_RECORDED (128) /* Only one outstanding migration per port is allowed */ #define DSW_MAX_PAUSED_FLOWS (DSW_MAX_PORTS) /* Enough room for paus request/confirm and unpaus request/confirm for * all possible senders. */ #define DSW_CTL_IN_RING_SIZE ((DSW_MAX_PORTS-1)*4) /* With DSW_SORT_DEQUEUED enabled, the scheduler will, at the point of * dequeue(), arrange events so that events with the same flow id on * the same queue forms a back-to-back "burst", and also so that such * bursts of different flow ids, but on the same queue, also come * consecutively. All this in an attempt to improve data and * instruction cache usage for the application, at the cost of a * scheduler overhead increase. */ /* #define DSW_SORT_DEQUEUED */ struct dsw_queue_flow { uint8_t queue_id; uint16_t flow_hash; }; enum dsw_migration_state { DSW_MIGRATION_STATE_IDLE, DSW_MIGRATION_STATE_PAUSING, DSW_MIGRATION_STATE_FORWARDING, DSW_MIGRATION_STATE_UNPAUSING }; struct dsw_port { uint16_t id; /* Keeping a pointer here to avoid container_of() calls, which * are expensive since they are very frequent and will result * in an integer multiplication (since the port id is an index * into the dsw_evdev port array). */ struct dsw_evdev *dsw; uint16_t dequeue_depth; uint16_t enqueue_depth; int32_t inflight_credits; int32_t new_event_threshold; uint16_t pending_releases; uint16_t next_parallel_flow_id; uint16_t ops_since_bg_task; /* most recent 'background' processing */ uint64_t last_bg; /* For port load measurement. */ uint64_t next_load_update; uint64_t load_update_interval; uint64_t measurement_start; uint64_t busy_start; uint64_t busy_cycles; uint64_t total_busy_cycles; /* For the ctl interface and flow migration mechanism. */ uint64_t next_migration; uint64_t migration_interval; enum dsw_migration_state migration_state; uint64_t migration_start; uint64_t migrations; uint64_t migration_latency; uint8_t migration_target_port_id; struct dsw_queue_flow migration_target_qf; uint8_t cfm_cnt; uint16_t paused_flows_len; struct dsw_queue_flow paused_flows[DSW_MAX_PAUSED_FLOWS]; /* In a very contrived worst case all inflight events can be * laying around paused here. */ uint16_t paused_events_len; struct rte_event paused_events[DSW_MAX_EVENTS]; uint16_t seen_events_len; uint16_t seen_events_idx; struct dsw_queue_flow seen_events[DSW_MAX_EVENTS_RECORDED]; uint64_t new_enqueued; uint64_t forward_enqueued; uint64_t release_enqueued; uint64_t queue_enqueued[DSW_MAX_QUEUES]; uint64_t dequeued; uint64_t queue_dequeued[DSW_MAX_QUEUES]; uint16_t out_buffer_len[DSW_MAX_PORTS]; struct rte_event out_buffer[DSW_MAX_PORTS][DSW_MAX_PORT_OUT_BUFFER]; uint16_t in_buffer_len; uint16_t in_buffer_start; /* This buffer may contain events that were read up from the * in_ring during the flow migration process. */ struct rte_event in_buffer[DSW_MAX_EVENTS]; struct rte_event_ring *in_ring __rte_cache_aligned; struct rte_ring *ctl_in_ring __rte_cache_aligned; /* Estimate of current port load. */ rte_atomic16_t load __rte_cache_aligned; } __rte_cache_aligned; struct dsw_queue { uint8_t schedule_type; uint8_t serving_ports[DSW_MAX_PORTS]; uint16_t num_serving_ports; uint8_t flow_to_port_map[DSW_MAX_FLOWS] __rte_cache_aligned; }; struct dsw_evdev { struct rte_eventdev_data *data; struct dsw_port ports[DSW_MAX_PORTS]; uint16_t num_ports; struct dsw_queue queues[DSW_MAX_QUEUES]; uint8_t num_queues; int32_t max_inflight; rte_atomic32_t credits_on_loan __rte_cache_aligned; }; #define DSW_CTL_PAUS_REQ (0) #define DSW_CTL_UNPAUS_REQ (1) #define DSW_CTL_CFM (2) /* sizeof(struct dsw_ctl_msg) must be equal or less than * sizeof(void *), to fit on the control ring. */ struct dsw_ctl_msg { uint8_t type:2; uint8_t originating_port_id:6; uint8_t queue_id; uint16_t flow_hash; } __rte_packed; uint16_t dsw_event_enqueue(void *port, const struct rte_event *event); uint16_t dsw_event_enqueue_burst(void *port, const struct rte_event events[], uint16_t events_len); uint16_t dsw_event_enqueue_new_burst(void *port, const struct rte_event events[], uint16_t events_len); uint16_t dsw_event_enqueue_forward_burst(void *port, const struct rte_event events[], uint16_t events_len); uint16_t dsw_event_dequeue(void *port, struct rte_event *ev, uint64_t wait); uint16_t dsw_event_dequeue_burst(void *port, struct rte_event *events, uint16_t num, uint64_t wait); int dsw_xstats_get_names(const struct rte_eventdev *dev, enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id, struct rte_event_dev_xstats_name *xstats_names, unsigned int *ids, unsigned int size); int dsw_xstats_get(const struct rte_eventdev *dev, enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id, const unsigned int ids[], uint64_t values[], unsigned int n); uint64_t dsw_xstats_get_by_name(const struct rte_eventdev *dev, const char *name, unsigned int *id); static inline struct dsw_evdev * dsw_pmd_priv(const struct rte_eventdev *eventdev) { return eventdev->data->dev_private; } #define DSW_LOG_DP(level, fmt, args...) \ RTE_LOG_DP(level, EVENTDEV, "[%s] %s() line %u: " fmt, \ DSW_PMD_NAME, \ __func__, __LINE__, ## args) #define DSW_LOG_DP_PORT(level, port_id, fmt, args...) \ DSW_LOG_DP(level, " " fmt, port_id, ## args) #endif