/* SPDX-License-Identifier: BSD-3-Clause * Copyright(c) 2017 Intel Corporation */ #ifndef _PMD_I40E_H_ #define _PMD_I40E_H_ /** * @file rte_pmd_i40e.h * * i40e PMD specific functions. * * @b EXPERIMENTAL: this API may change, or be removed, without prior notice * */ #include /** * Response sent back to i40e driver from user app after callback */ enum rte_pmd_i40e_mb_event_rsp { RTE_PMD_I40E_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */ RTE_PMD_I40E_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */ RTE_PMD_I40E_MB_EVENT_PROCEED, /**< proceed with mbox request */ RTE_PMD_I40E_MB_EVENT_MAX /**< max value of this enum */ }; /** * Data sent to the user application when the callback is executed. */ struct rte_pmd_i40e_mb_event_param { uint16_t vfid; /**< Virtual Function number */ uint16_t msg_type; /**< VF to PF message type, see virtchnl_ops */ uint16_t retval; /**< return value */ void *msg; /**< pointer to message */ uint16_t msglen; /**< length of the message */ }; /** * Option of package processing. */ enum rte_pmd_i40e_package_op { RTE_PMD_I40E_PKG_OP_UNDEFINED = 0, RTE_PMD_I40E_PKG_OP_WR_ADD, /**< load package and add to info list */ RTE_PMD_I40E_PKG_OP_WR_DEL, /**< load package and delete from info list */ RTE_PMD_I40E_PKG_OP_WR_ONLY, /**< load package without modifying info list */ RTE_PMD_I40E_PKG_OP_MAX = 32 }; /** * Types of package information. */ enum rte_pmd_i40e_package_info { RTE_PMD_I40E_PKG_INFO_UNDEFINED = 0, RTE_PMD_I40E_PKG_INFO_GLOBAL_HEADER, RTE_PMD_I40E_PKG_INFO_GLOBAL_NOTES_SIZE, RTE_PMD_I40E_PKG_INFO_GLOBAL_NOTES, RTE_PMD_I40E_PKG_INFO_GLOBAL_MAX = 1024, RTE_PMD_I40E_PKG_INFO_HEADER, RTE_PMD_I40E_PKG_INFO_DEVID_NUM, RTE_PMD_I40E_PKG_INFO_DEVID_LIST, RTE_PMD_I40E_PKG_INFO_PROTOCOL_NUM, RTE_PMD_I40E_PKG_INFO_PROTOCOL_LIST, RTE_PMD_I40E_PKG_INFO_PCTYPE_NUM, RTE_PMD_I40E_PKG_INFO_PCTYPE_LIST, RTE_PMD_I40E_PKG_INFO_PTYPE_NUM, RTE_PMD_I40E_PKG_INFO_PTYPE_LIST, RTE_PMD_I40E_PKG_INFO_MAX = (int)0xFFFFFFFF }; /** * Option types of queue region. */ enum rte_pmd_i40e_queue_region_op { RTE_PMD_I40E_RSS_QUEUE_REGION_UNDEFINED, /** add queue region set */ RTE_PMD_I40E_RSS_QUEUE_REGION_SET, /** add PF region pctype set */ RTE_PMD_I40E_RSS_QUEUE_REGION_FLOWTYPE_SET, /** add queue region user priority set */ RTE_PMD_I40E_RSS_QUEUE_REGION_USER_PRIORITY_SET, /** * ALL configuration about queue region from up layer * at first will only keep in DPDK software stored in driver, * only after " FLUSH_ON ", it commit all configuration to HW. * Because PMD had to set hardware configuration at a time, so * it will record all up layer command at first. */ RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_ON, /** * "FLUSH_OFF " is just clean all configuration about queue * region just now, and restore all to DPDK i40e driver default * config when start up. */ RTE_PMD_I40E_RSS_QUEUE_REGION_ALL_FLUSH_OFF, RTE_PMD_I40E_RSS_QUEUE_REGION_INFO_GET, RTE_PMD_I40E_RSS_QUEUE_REGION_OP_MAX }; #define RTE_PMD_I40E_DDP_NAME_SIZE 32 #define RTE_PMD_I40E_PCTYPE_MAX 64 #define RTE_PMD_I40E_REGION_MAX_NUM 8 #define RTE_PMD_I40E_MAX_USER_PRIORITY 8 /** * Version for dynamic device personalization. * Version in "major.minor.update.draft" format. */ struct rte_pmd_i40e_ddp_version { uint8_t major; uint8_t minor; uint8_t update; uint8_t draft; }; /** * Device ID for dynamic device personalization. */ struct rte_pmd_i40e_ddp_device_id { uint32_t vendor_dev_id; uint32_t sub_vendor_dev_id; }; /** * Profile information in profile info list. */ struct rte_pmd_i40e_profile_info { uint32_t track_id; struct rte_pmd_i40e_ddp_version version; uint8_t owner; uint8_t reserved[7]; uint8_t name[RTE_PMD_I40E_DDP_NAME_SIZE]; }; #define RTE_PMD_I40E_DDP_OWNER_UNKNOWN 0xFF /** * Profile information list returned from HW. */ struct rte_pmd_i40e_profile_list { uint32_t p_count; struct rte_pmd_i40e_profile_info p_info[1]; }; #define RTE_PMD_I40E_PROTO_NUM 6 #define RTE_PMD_I40E_PROTO_UNUSED 0xFF /** * Protocols information stored in profile */ struct rte_pmd_i40e_proto_info { uint8_t proto_id; char name[RTE_PMD_I40E_DDP_NAME_SIZE]; }; /** * Packet classification/ packet type information stored in profile */ struct rte_pmd_i40e_ptype_info { uint8_t ptype_id; uint8_t protocols[RTE_PMD_I40E_PROTO_NUM]; }; /** * ptype mapping table only accept RTE_PTYPE_XXX or "user defined" ptype. * A ptype with MSB set will be regarded as a user defined ptype. * Below macro help to create a user defined ptype. */ #define RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK 0x80000000 struct rte_pmd_i40e_ptype_mapping { uint16_t hw_ptype; /**< hardware defined packet type*/ uint32_t sw_ptype; /**< software defined packet type */ }; /** * Queue region related information. */ struct rte_pmd_i40e_queue_region_conf { /** the region id for this configuration */ uint8_t region_id; /** the pctype or hardware flowtype of packet, * the specific index for each type has been defined * in file i40e_type.h as enum i40e_filter_pctype. */ uint8_t hw_flowtype; /** the start queue index for this region */ uint8_t queue_start_index; /** the total queue number of this queue region */ uint8_t queue_num; /** the packet's user priority for this region */ uint8_t user_priority; }; /* queue region info */ struct rte_pmd_i40e_queue_region_info { /** the region id for this configuration */ uint8_t region_id; /** the start queue index for this region */ uint8_t queue_start_index; /** the total queue number of this queue region */ uint8_t queue_num; /** the total number of user priority for this region */ uint8_t user_priority_num; /** the packet's user priority for this region */ uint8_t user_priority[RTE_PMD_I40E_MAX_USER_PRIORITY]; /** the total number of flowtype for this region */ uint8_t flowtype_num; /** * the pctype or hardware flowtype of packet, * the specific index for each type has been defined * in file i40e_type.h as enum i40e_filter_pctype. */ uint8_t hw_flowtype[RTE_PMD_I40E_PCTYPE_MAX]; }; struct rte_pmd_i40e_queue_regions { /** the total number of queue region for this port */ uint16_t queue_region_number; struct rte_pmd_i40e_queue_region_info region[RTE_PMD_I40E_REGION_MAX_NUM]; }; /** * Behavior will be taken if raw packet template is matched. */ enum rte_pmd_i40e_pkt_template_behavior { RTE_PMD_I40E_PKT_TEMPLATE_ACCEPT, RTE_PMD_I40E_PKT_TEMPLATE_REJECT, RTE_PMD_I40E_PKT_TEMPLATE_PASSTHRU, }; /** * Flow director report status * It defines what will be reported if raw packet template is matched. */ enum rte_pmd_i40e_pkt_template_status { /** report nothing */ RTE_PMD_I40E_PKT_TEMPLATE_NO_REPORT_STATUS, /** only report FD ID */ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID, /** report FD ID and 4 flex bytes */ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID_FLEX_4, /** report 8 flex bytes */ RTE_PMD_I40E_PKT_TEMPLATE_REPORT_FLEX_8, }; /** * A structure used to define an action when raw packet template is matched. */ struct rte_pmd_i40e_pkt_template_action { /** queue assigned to if raw packet template match */ uint16_t rx_queue; /** behavior will be taken */ enum rte_pmd_i40e_pkt_template_behavior behavior; /** status report option */ enum rte_pmd_i40e_pkt_template_status report_status; /** * If report_status is RTE_PMD_I40E_PKT_TEMPLATE_REPORT_ID_FLEX_4 or * RTE_PMD_I40E_PKT_TEMPLATE_REPORT_FLEX_8, flex_off specifies * where the reported flex bytes start from in flexible payload. */ uint8_t flex_off; }; /** * A structure used to define the input for raw packet template. */ struct rte_pmd_i40e_pkt_template_input { /** the pctype used for raw packet template */ uint16_t pctype; /** the buffer conatining raw packet template */ void *packet; /** the length of buffer with raw packet template */ uint32_t length; }; /** * A structure used to define the configuration parameters * for raw packet template. */ struct rte_pmd_i40e_pkt_template_conf { /** the input for raw packet template. */ struct rte_pmd_i40e_pkt_template_input input; /** the action to be taken when raw packet template is matched */ struct rte_pmd_i40e_pkt_template_action action; /** ID, an unique software index for the raw packet template filter */ uint32_t soft_id; }; enum rte_pmd_i40e_inset_type { INSET_NONE = 0, INSET_HASH, INSET_FDIR, INSET_FDIR_FLX, }; struct rte_pmd_i40e_inset_mask { uint8_t field_idx; uint16_t mask; }; struct rte_pmd_i40e_inset { uint64_t inset; struct rte_pmd_i40e_inset_mask mask[2]; }; /** * Add or remove raw packet template filter to Flow Director. * * @param port * The port identifier of the Ethernet device. * @param conf * Specifies configuration parameters of raw packet template filter. * @param add * Speicifes an action to be taken - add or remove raw packet template filter. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *conf* invalid. * - (-ENOTSUP) not supported by firmware. */ int rte_pmd_i40e_flow_add_del_packet_template( uint16_t port, const struct rte_pmd_i40e_pkt_template_conf *conf, uint8_t add); /** * Notify VF when PF link status changes. * * @param port * The port identifier of the Ethernet device. * @param vf * VF id. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* invalid. */ int rte_pmd_i40e_ping_vfs(uint16_t port, uint16_t vf); /** * Enable/Disable VF MAC anti spoofing. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF on which to set MAC anti spoofing. * @param on * 1 - Enable VFs MAC anti spoofing. * 0 - Disable VFs MAC anti spoofing. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf_id, uint8_t on); /** * Enable/Disable VF VLAN anti spoofing. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF on which to set VLAN anti spoofing. * @param on * 1 - Enable VFs VLAN anti spoofing. * 0 - Disable VFs VLAN anti spoofing. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf_id, uint8_t on); /** * Enable/Disable TX loopback on all the PF and VFs. * * @param port * The port identifier of the Ethernet device. * @param on * 1 - Enable TX loopback. * 0 - Disable TX loopback. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_tx_loopback(uint16_t port, uint8_t on); /** * Enable/Disable VF unicast promiscuous mode. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF on which to set. * @param on * 1 - Enable. * 0 - Disable. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_unicast_promisc(uint16_t port, uint16_t vf_id, uint8_t on); /** * Enable/Disable VF multicast promiscuous mode. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF on which to set. * @param on * 1 - Enable. * 0 - Disable. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_multicast_promisc(uint16_t port, uint16_t vf_id, uint8_t on); /** * Set the VF MAC address. * * PF should set MAC address before VF initialized, if PF sets the MAC * address after VF initialized, new MAC address won't be effective until * VF reinitialize. * * This will remove all existing MAC filters. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF id. * @param mac_addr * VF MAC address. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* or *mac_addr* is invalid. */ int rte_pmd_i40e_set_vf_mac_addr(uint16_t port, uint16_t vf_id, struct ether_addr *mac_addr); /** * Remove the VF MAC address. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF id. * @param mac_addr * VF MAC address. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* or *mac_addr* is invalid. */ int rte_pmd_i40e_remove_vf_mac_addr(uint16_t port, uint16_t vf_id, struct ether_addr *mac_addr); /** * Enable/Disable vf vlan strip for all queues in a pool * * @param port * The port identifier of the Ethernet device. * @param vf * ID specifying VF. * @param on * 1 - Enable VF's vlan strip on RX queues. * 0 - Disable VF's vlan strip on RX queues. * * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan insert * * @param port * The port identifier of the Ethernet device. * @param vf_id * ID specifying VF. * @param vlan_id * 0 - Disable VF's vlan insert. * n - Enable; n is inserted as the vlan id. * * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_vlan_insert(uint16_t port, uint16_t vf_id, uint16_t vlan_id); /** * Enable/Disable vf broadcast mode * * @param port * The port identifier of the Ethernet device. * @param vf_id * ID specifying VF. * @param on * 0 - Disable broadcast. * 1 - Enable broadcast. * * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_broadcast(uint16_t port, uint16_t vf_id, uint8_t on); /** * Enable/Disable vf vlan tag * * @param port * The port identifier of the Ethernet device. * @param vf_id * ID specifying VF. * @param on * 0 - Disable VF's vlan tag. * n - Enable VF's vlan tag. * * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_set_vf_vlan_tag(uint16_t port, uint16_t vf_id, uint8_t on); /** * Enable/Disable VF VLAN filter * * @param port * The port identifier of the Ethernet device. * @param vlan_id * ID specifying VLAN * @param vf_mask * Mask to filter VF's * @param on * 0 - Disable VF's VLAN filter. * 1 - Enable VF's VLAN filter. * * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ int rte_pmd_i40e_set_vf_vlan_filter(uint16_t port, uint16_t vlan_id, uint64_t vf_mask, uint8_t on); /** * Get VF's statistics * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF on which to get. * @param stats * A pointer to a structure of type *rte_eth_stats* to be filled with * the values of device counters for the following set of statistics: * - *ipackets* with the total of successfully received packets. * - *opackets* with the total of successfully transmitted packets. * - *ibytes* with the total of successfully received bytes. * - *obytes* with the total of successfully transmitted bytes. * - *ierrors* with the total of erroneous received packets. * - *oerrors* with the total of failed transmitted packets. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_get_vf_stats(uint16_t port, uint16_t vf_id, struct rte_eth_stats *stats); /** * Clear VF's statistics * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF on which to get. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_reset_vf_stats(uint16_t port, uint16_t vf_id); /** * Set VF's max bandwidth. * * Per VF bandwidth limitation and per TC bandwidth limitation cannot * be enabled in parallel. If per TC bandwidth is enabled, this function * will disable it. * * @param port * The port identifier of the Ethernet device. * @param vf_id * ID specifying VF. * @param bw * Bandwidth for this VF. * The value should be an absolute bandwidth in Mbps. * The bandwidth is a L2 bandwidth counting the bytes of ethernet packets. * Not count the bytes added by physical layer. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ int rte_pmd_i40e_set_vf_max_bw(uint16_t port, uint16_t vf_id, uint32_t bw); /** * Set all the TCs' bandwidth weight on a specific VF. * * The bw_weight means the percentage occupied by the TC. * It can be taken as the relative min bandwidth setting. * * @param port * The port identifier of the Ethernet device. * @param vf_id * ID specifying VF. * @param tc_num * Number of TCs. * @param bw_weight * An array of relative bandwidth weight for all the TCs. * The summary of the bw_weight should be 100. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ int rte_pmd_i40e_set_vf_tc_bw_alloc(uint16_t port, uint16_t vf_id, uint8_t tc_num, uint8_t *bw_weight); /** * Set a specific TC's max bandwidth on a specific VF. * * @param port * The port identifier of the Ethernet device. * @param vf_id * ID specifying VF. * @param tc_no * Number specifying TC. * @param bw * Max bandwidth for this TC. * The value should be an absolute bandwidth in Mbps. * The bandwidth is a L2 bandwidth counting the bytes of ethernet packets. * Not count the bytes added by physical layer. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ int rte_pmd_i40e_set_vf_tc_max_bw(uint16_t port, uint16_t vf_id, uint8_t tc_no, uint32_t bw); /** * Set some TCs to strict priority mode on a physical port. * * @param port * The port identifier of the Ethernet device. * @param tc_map * A bit map for the TCs. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ int rte_pmd_i40e_set_tc_strict_prio(uint16_t port, uint8_t tc_map); /** * Load/Unload a ddp package * * @param port * The port identifier of the Ethernet device. * @param buff * buffer of package. * @param size * size of buffer. * @param op * Operation of package processing * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-EEXIST) if profile exists. * - (-EACCES) if profile does not exist. * - (-ENOTSUP) if operation not supported. */ int rte_pmd_i40e_process_ddp_package(uint16_t port, uint8_t *buff, uint32_t size, enum rte_pmd_i40e_package_op op); /** * rte_pmd_i40e_get_ddp_info - Get profile's info * @param pkg * buffer of package. * @param pkg_size * package buffer size * @param info * buffer for response * @param size * response buffer size * @param type * type of information requested * @return * - (0) if successful. * - (-ENOTSUP) if information type not supported by the profile. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_get_ddp_info(uint8_t *pkg, uint32_t pkg_size, uint8_t *info, uint32_t size, enum rte_pmd_i40e_package_info type); /** * rte_pmd_i40e_get_ddp_list - Get loaded profile list * @param port * port id * @param buff * buffer for response * @param size * buffer size * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ int rte_pmd_i40e_get_ddp_list(uint16_t port, uint8_t *buff, uint32_t size); /** * Update hardware defined ptype to software defined packet type * mapping table. * * @param port * pointer to port identifier of the device. * @param mapping_items * the base address of the mapping items array. * @param count * number of mapping items. * @param exclusive * the flag indicate different ptype mapping update method. * -(0) only overwrite referred PTYPE mapping, * keep other PTYPEs mapping unchanged. * -(!0) overwrite referred PTYPE mapping, * set other PTYPEs maps to PTYPE_UNKNOWN. */ int rte_pmd_i40e_ptype_mapping_update( uint16_t port, struct rte_pmd_i40e_ptype_mapping *mapping_items, uint16_t count, uint8_t exclusive); /** * Reset hardware defined ptype to software defined ptype * mapping table to default. * * @param port * pointer to port identifier of the device */ int rte_pmd_i40e_ptype_mapping_reset(uint16_t port); /** * Get hardware defined ptype to software defined ptype * mapping items. * * @param port * pointer to port identifier of the device. * @param mapping_items * the base address of the array to store returned items. * @param size * the size of the input array. * @param count * the place to store the number of returned items. * @param valid_only * -(0) return full mapping table. * -(!0) only return mapping items which packet_type != RTE_PTYPE_UNKNOWN. */ int rte_pmd_i40e_ptype_mapping_get( uint16_t port, struct rte_pmd_i40e_ptype_mapping *mapping_items, uint16_t size, uint16_t *count, uint8_t valid_only); /** * Replace a specific or a group of software defined ptypes * with a new one * * @param port * pointer to port identifier of the device * @param target * the packet type to be replaced * @param mask * -(0) target represent a specific software defined ptype. * -(!0) target is a mask to represent a group of software defined ptypes. * @param pkt_type * the new packet type to overwrite */ int rte_pmd_i40e_ptype_mapping_replace(uint16_t port, uint32_t target, uint8_t mask, uint32_t pkt_type); /** * Add a VF MAC address. * * Add more MAC address for VF. The existing MAC addresses * are still effective. * * @param port * The port identifier of the Ethernet device. * @param vf_id * VF id. * @param mac_addr * VF MAC address. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* or *mac_addr* is invalid. */ int rte_pmd_i40e_add_vf_mac_addr(uint16_t port, uint16_t vf_id, struct ether_addr *mac_addr); #define RTE_PMD_I40E_PCTYPE_MAX 64 #define RTE_PMD_I40E_FLOW_TYPE_MAX 64 struct rte_pmd_i40e_flow_type_mapping { uint16_t flow_type; /**< software defined flow type*/ uint64_t pctype; /**< hardware defined pctype */ }; /** * Update hardware defined pctype to software defined flow type * mapping table. * * @param port * pointer to port identifier of the device. * @param mapping_items * the base address of the mapping items array. * @param count * number of mapping items. * @param exclusive * the flag indicate different pctype mapping update method. * -(0) only overwrite referred PCTYPE mapping, * keep other PCTYPEs mapping unchanged. * -(!0) overwrite referred PCTYPE mapping, * set other PCTYPEs maps to PCTYPE_INVALID. */ int rte_pmd_i40e_flow_type_mapping_update( uint16_t port, struct rte_pmd_i40e_flow_type_mapping *mapping_items, uint16_t count, uint8_t exclusive); /** * Get software defined flow type to hardware defined pctype * mapping items. * * @param port * pointer to port identifier of the device. * @param mapping_items * the base address of the array to store returned items. * array should be allocated by caller with minimum size of * RTE_PMD_I40E_FLOW_TYPE_MAX items */ int rte_pmd_i40e_flow_type_mapping_get( uint16_t port, struct rte_pmd_i40e_flow_type_mapping *mapping_items); /** * Reset hardware defined pctype to software defined flow type * mapping table to default. * * @param port * pointer to port identifier of the device */ int rte_pmd_i40e_flow_type_mapping_reset(uint16_t port); /** * On the PF, find VF index based on VF MAC address * * @param port * pointer to port identifier of the device * @param vf_mac * the mac address of the vf to determine index of * @return * The index of vfid If successful. * -EINVAL: vf mac address does not exist for this port * -ENOTSUP: i40e not supported for this port. */ int rte_pmd_i40e_query_vfid_by_mac(uint16_t port, const struct ether_addr *vf_mac); /** * Do RSS queue region configuration for that port as * the command option type * * @param port_id * The port identifier of the Ethernet device. * @param op_type * Queue region operation type * @param arg * Queue region operation type specific data */ int rte_pmd_i40e_rss_queue_region_conf(uint16_t port_id, enum rte_pmd_i40e_queue_region_op op_type, void *arg); int rte_pmd_i40e_cfg_hash_inset(uint16_t port, uint64_t pctype, uint64_t inset); /** * Get input set * * @param port * The port identifier of the Ethernet device. * @param pctype * HW pctype. * @param inset * Buffer for input set info. * @param inset_type * Type of input set. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) if operation not supported. */ int rte_pmd_i40e_inset_get(uint16_t port, uint8_t pctype, struct rte_pmd_i40e_inset *inset, enum rte_pmd_i40e_inset_type inset_type); /** * Set input set * * @param port * The port identifier of the Ethernet device. * @param pctype * HW pctype. * @param inset * Input set info. * @param inset_type * Type of input set. * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. * - (-ENOTSUP) if operation not supported. */ int rte_pmd_i40e_inset_set(uint16_t port, uint8_t pctype, struct rte_pmd_i40e_inset *inset, enum rte_pmd_i40e_inset_type inset_type); /** * Get bit value for some field index * * @param inset * Input set value. * @param field_idx * Field index for input set. * @return * - (1) if set. * - (0) if cleared. */ static inline int rte_pmd_i40e_inset_field_get(uint64_t inset, uint8_t field_idx) { uint8_t bit_idx; if (field_idx > 63) return 0; bit_idx = 63 - field_idx; if (inset & (1ULL << bit_idx)) return 1; return 0; } /** * Set bit value for some field index * * @param inset * Input set value. * @param field_idx * Field index for input set. * @return * - (-1) if failed. * - (0) if success. */ static inline int rte_pmd_i40e_inset_field_set(uint64_t *inset, uint8_t field_idx) { uint8_t bit_idx; if (field_idx > 63) return -1; bit_idx = 63 - field_idx; *inset = *inset | (1ULL << bit_idx); return 0; } /** * Clear bit value for some field index * * @param inset * Input set value. * @param field_idx * Field index for input set. * @return * - (-1) if failed. * - (0) if success. */ static inline int rte_pmd_i40e_inset_field_clear(uint64_t *inset, uint8_t field_idx) { uint8_t bit_idx; if (field_idx > 63) return -1; bit_idx = 63 - field_idx; *inset = *inset & ~(1ULL << bit_idx); return 0; } #endif /* _PMD_I40E_H_ */