// SPDX-License-Identifier: GPL-2.0 /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver Copyright(c) 2007-2013 Intel Corporation. Contact Information: e1000-devel Mailing List Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ #include "e1000_api.h" static void e1000_reload_nvm_generic(struct e1000_hw *hw); /** * e1000_init_nvm_ops_generic - Initialize NVM function pointers * @hw: pointer to the HW structure * * Setups up the function pointers to no-op functions **/ void e1000_init_nvm_ops_generic(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; DEBUGFUNC("e1000_init_nvm_ops_generic"); /* Initialize function pointers */ nvm->ops.init_params = e1000_null_ops_generic; nvm->ops.acquire = e1000_null_ops_generic; nvm->ops.read = e1000_null_read_nvm; nvm->ops.release = e1000_null_nvm_generic; nvm->ops.reload = e1000_reload_nvm_generic; nvm->ops.update = e1000_null_ops_generic; nvm->ops.valid_led_default = e1000_null_led_default; nvm->ops.validate = e1000_null_ops_generic; nvm->ops.write = e1000_null_write_nvm; } /** * e1000_null_nvm_read - No-op function, return 0 * @hw: pointer to the HW structure **/ s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw, u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, u16 E1000_UNUSEDARG *c) { DEBUGFUNC("e1000_null_read_nvm"); return E1000_SUCCESS; } /** * e1000_null_nvm_generic - No-op function, return void * @hw: pointer to the HW structure **/ void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw) { DEBUGFUNC("e1000_null_nvm_generic"); return; } /** * e1000_null_led_default - No-op function, return 0 * @hw: pointer to the HW structure **/ s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw, u16 E1000_UNUSEDARG *data) { DEBUGFUNC("e1000_null_led_default"); return E1000_SUCCESS; } /** * e1000_null_write_nvm - No-op function, return 0 * @hw: pointer to the HW structure **/ s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw, u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, u16 E1000_UNUSEDARG *c) { DEBUGFUNC("e1000_null_write_nvm"); return E1000_SUCCESS; } /** * e1000_raise_eec_clk - Raise EEPROM clock * @hw: pointer to the HW structure * @eecd: pointer to the EEPROM * * Enable/Raise the EEPROM clock bit. **/ static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) { *eecd = *eecd | E1000_EECD_SK; E1000_WRITE_REG(hw, E1000_EECD, *eecd); E1000_WRITE_FLUSH(hw); usec_delay(hw->nvm.delay_usec); } /** * e1000_lower_eec_clk - Lower EEPROM clock * @hw: pointer to the HW structure * @eecd: pointer to the EEPROM * * Clear/Lower the EEPROM clock bit. **/ static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) { *eecd = *eecd & ~E1000_EECD_SK; E1000_WRITE_REG(hw, E1000_EECD, *eecd); E1000_WRITE_FLUSH(hw); usec_delay(hw->nvm.delay_usec); } /** * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM * @hw: pointer to the HW structure * @data: data to send to the EEPROM * @count: number of bits to shift out * * We need to shift 'count' bits out to the EEPROM. So, the value in the * "data" parameter will be shifted out to the EEPROM one bit at a time. * In order to do this, "data" must be broken down into bits. **/ static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) { struct e1000_nvm_info *nvm = &hw->nvm; u32 eecd = E1000_READ_REG(hw, E1000_EECD); u32 mask; DEBUGFUNC("e1000_shift_out_eec_bits"); mask = 0x01 << (count - 1); if (nvm->type == e1000_nvm_eeprom_spi) eecd |= E1000_EECD_DO; do { eecd &= ~E1000_EECD_DI; if (data & mask) eecd |= E1000_EECD_DI; E1000_WRITE_REG(hw, E1000_EECD, eecd); E1000_WRITE_FLUSH(hw); usec_delay(nvm->delay_usec); e1000_raise_eec_clk(hw, &eecd); e1000_lower_eec_clk(hw, &eecd); mask >>= 1; } while (mask); eecd &= ~E1000_EECD_DI; E1000_WRITE_REG(hw, E1000_EECD, eecd); } /** * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM * @hw: pointer to the HW structure * @count: number of bits to shift in * * In order to read a register from the EEPROM, we need to shift 'count' bits * in from the EEPROM. Bits are "shifted in" by raising the clock input to * the EEPROM (setting the SK bit), and then reading the value of the data out * "DO" bit. During this "shifting in" process the data in "DI" bit should * always be clear. **/ static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) { u32 eecd; u32 i; u16 data; DEBUGFUNC("e1000_shift_in_eec_bits"); eecd = E1000_READ_REG(hw, E1000_EECD); eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); data = 0; for (i = 0; i < count; i++) { data <<= 1; e1000_raise_eec_clk(hw, &eecd); eecd = E1000_READ_REG(hw, E1000_EECD); eecd &= ~E1000_EECD_DI; if (eecd & E1000_EECD_DO) data |= 1; e1000_lower_eec_clk(hw, &eecd); } return data; } /** * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion * @hw: pointer to the HW structure * @ee_reg: EEPROM flag for polling * * Polls the EEPROM status bit for either read or write completion based * upon the value of 'ee_reg'. **/ s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) { u32 attempts = 100000; u32 i, reg = 0; DEBUGFUNC("e1000_poll_eerd_eewr_done"); for (i = 0; i < attempts; i++) { if (ee_reg == E1000_NVM_POLL_READ) reg = E1000_READ_REG(hw, E1000_EERD); else reg = E1000_READ_REG(hw, E1000_EEWR); if (reg & E1000_NVM_RW_REG_DONE) return E1000_SUCCESS; usec_delay(5); } return -E1000_ERR_NVM; } /** * e1000_acquire_nvm_generic - Generic request for access to EEPROM * @hw: pointer to the HW structure * * Set the EEPROM access request bit and wait for EEPROM access grant bit. * Return successful if access grant bit set, else clear the request for * EEPROM access and return -E1000_ERR_NVM (-1). **/ s32 e1000_acquire_nvm_generic(struct e1000_hw *hw) { u32 eecd = E1000_READ_REG(hw, E1000_EECD); s32 timeout = E1000_NVM_GRANT_ATTEMPTS; DEBUGFUNC("e1000_acquire_nvm_generic"); E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ); eecd = E1000_READ_REG(hw, E1000_EECD); while (timeout) { if (eecd & E1000_EECD_GNT) break; usec_delay(5); eecd = E1000_READ_REG(hw, E1000_EECD); timeout--; } if (!timeout) { eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, E1000_EECD, eecd); DEBUGOUT("Could not acquire NVM grant\n"); return -E1000_ERR_NVM; } return E1000_SUCCESS; } /** * e1000_standby_nvm - Return EEPROM to standby state * @hw: pointer to the HW structure * * Return the EEPROM to a standby state. **/ static void e1000_standby_nvm(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; u32 eecd = E1000_READ_REG(hw, E1000_EECD); DEBUGFUNC("e1000_standby_nvm"); if (nvm->type == e1000_nvm_eeprom_spi) { /* Toggle CS to flush commands */ eecd |= E1000_EECD_CS; E1000_WRITE_REG(hw, E1000_EECD, eecd); E1000_WRITE_FLUSH(hw); usec_delay(nvm->delay_usec); eecd &= ~E1000_EECD_CS; E1000_WRITE_REG(hw, E1000_EECD, eecd); E1000_WRITE_FLUSH(hw); usec_delay(nvm->delay_usec); } } /** * e1000_stop_nvm - Terminate EEPROM command * @hw: pointer to the HW structure * * Terminates the current command by inverting the EEPROM's chip select pin. **/ static void e1000_stop_nvm(struct e1000_hw *hw) { u32 eecd; DEBUGFUNC("e1000_stop_nvm"); eecd = E1000_READ_REG(hw, E1000_EECD); if (hw->nvm.type == e1000_nvm_eeprom_spi) { /* Pull CS high */ eecd |= E1000_EECD_CS; e1000_lower_eec_clk(hw, &eecd); } } /** * e1000_release_nvm_generic - Release exclusive access to EEPROM * @hw: pointer to the HW structure * * Stop any current commands to the EEPROM and clear the EEPROM request bit. **/ void e1000_release_nvm_generic(struct e1000_hw *hw) { u32 eecd; DEBUGFUNC("e1000_release_nvm_generic"); e1000_stop_nvm(hw); eecd = E1000_READ_REG(hw, E1000_EECD); eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, E1000_EECD, eecd); } /** * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write * @hw: pointer to the HW structure * * Setups the EEPROM for reading and writing. **/ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; u32 eecd = E1000_READ_REG(hw, E1000_EECD); u8 spi_stat_reg; DEBUGFUNC("e1000_ready_nvm_eeprom"); if (nvm->type == e1000_nvm_eeprom_spi) { u16 timeout = NVM_MAX_RETRY_SPI; /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); E1000_WRITE_REG(hw, E1000_EECD, eecd); E1000_WRITE_FLUSH(hw); usec_delay(1); /* Read "Status Register" repeatedly until the LSB is cleared. * The EEPROM will signal that the command has been completed * by clearing bit 0 of the internal status register. If it's * not cleared within 'timeout', then error out. */ while (timeout) { e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, hw->nvm.opcode_bits); spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) break; usec_delay(5); e1000_standby_nvm(hw); timeout--; } if (!timeout) { DEBUGOUT("SPI NVM Status error\n"); return -E1000_ERR_NVM; } } return E1000_SUCCESS; } /** * e1000_read_nvm_spi - Read EEPROM's using SPI * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read * @data: word read from the EEPROM * * Reads a 16 bit word from the EEPROM. **/ s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; u32 i = 0; s32 ret_val; u16 word_in; u8 read_opcode = NVM_READ_OPCODE_SPI; DEBUGFUNC("e1000_read_nvm_spi"); /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { DEBUGOUT("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } ret_val = nvm->ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000_ready_nvm_eeprom(hw); if (ret_val) goto release; e1000_standby_nvm(hw); if ((nvm->address_bits == 8) && (offset >= 128)) read_opcode |= NVM_A8_OPCODE_SPI; /* Send the READ command (opcode + addr) */ e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); /* Read the data. SPI NVMs increment the address with each byte * read and will roll over if reading beyond the end. This allows * us to read the whole NVM from any offset */ for (i = 0; i < words; i++) { word_in = e1000_shift_in_eec_bits(hw, 16); data[i] = (word_in >> 8) | (word_in << 8); } release: nvm->ops.release(hw); return ret_val; } /** * e1000_read_nvm_eerd - Reads EEPROM using EERD register * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read * @data: word read from the EEPROM * * Reads a 16 bit word from the EEPROM using the EERD register. **/ s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; u32 i, eerd = 0; s32 ret_val = E1000_SUCCESS; DEBUGFUNC("e1000_read_nvm_eerd"); /* A check for invalid values: offset too large, too many words, * too many words for the offset, and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { DEBUGOUT("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } for (i = 0; i < words; i++) { eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + E1000_NVM_RW_REG_START; E1000_WRITE_REG(hw, E1000_EERD, eerd); ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); if (ret_val) break; data[i] = (E1000_READ_REG(hw, E1000_EERD) >> E1000_NVM_RW_REG_DATA); } return ret_val; } /** * e1000_write_nvm_spi - Write to EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset within the EEPROM to be written to * @words: number of words to write * @data: 16 bit word(s) to be written to the EEPROM * * Writes data to EEPROM at offset using SPI interface. * * If e1000_update_nvm_checksum is not called after this function , the * EEPROM will most likely contain an invalid checksum. **/ s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; s32 ret_val = -E1000_ERR_NVM; u16 widx = 0; DEBUGFUNC("e1000_write_nvm_spi"); /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { DEBUGOUT("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } while (widx < words) { u8 write_opcode = NVM_WRITE_OPCODE_SPI; ret_val = nvm->ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000_ready_nvm_eeprom(hw); if (ret_val) { nvm->ops.release(hw); return ret_val; } e1000_standby_nvm(hw); /* Send the WRITE ENABLE command (8 bit opcode) */ e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, nvm->opcode_bits); e1000_standby_nvm(hw); /* Some SPI eeproms use the 8th address bit embedded in the * opcode */ if ((nvm->address_bits == 8) && (offset >= 128)) write_opcode |= NVM_A8_OPCODE_SPI; /* Send the Write command (8-bit opcode + addr) */ e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), nvm->address_bits); /* Loop to allow for up to whole page write of eeprom */ while (widx < words) { u16 word_out = data[widx]; word_out = (word_out >> 8) | (word_out << 8); e1000_shift_out_eec_bits(hw, word_out, 16); widx++; if ((((offset + widx) * 2) % nvm->page_size) == 0) { e1000_standby_nvm(hw); break; } } msec_delay(10); nvm->ops.release(hw); } return ret_val; } /** * e1000_read_pba_string_generic - Read device part number * @hw: pointer to the HW structure * @pba_num: pointer to device part number * @pba_num_size: size of part number buffer * * Reads the product board assembly (PBA) number from the EEPROM and stores * the value in pba_num. **/ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) { s32 ret_val; u16 nvm_data; u16 pba_ptr; u16 offset; u16 length; DEBUGFUNC("e1000_read_pba_string_generic"); if (pba_num == NULL) { DEBUGOUT("PBA string buffer was null\n"); return -E1000_ERR_INVALID_ARGUMENT; } ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } /* if nvm_data is not ptr guard the PBA must be in legacy format which * means pba_ptr is actually our second data word for the PBA number * and we can decode it into an ascii string */ if (nvm_data != NVM_PBA_PTR_GUARD) { DEBUGOUT("NVM PBA number is not stored as string\n"); /* make sure callers buffer is big enough to store the PBA */ if (pba_num_size < E1000_PBANUM_LENGTH) { DEBUGOUT("PBA string buffer too small\n"); return E1000_ERR_NO_SPACE; } /* extract hex string from data and pba_ptr */ pba_num[0] = (nvm_data >> 12) & 0xF; pba_num[1] = (nvm_data >> 8) & 0xF; pba_num[2] = (nvm_data >> 4) & 0xF; pba_num[3] = nvm_data & 0xF; pba_num[4] = (pba_ptr >> 12) & 0xF; pba_num[5] = (pba_ptr >> 8) & 0xF; pba_num[6] = '-'; pba_num[7] = 0; pba_num[8] = (pba_ptr >> 4) & 0xF; pba_num[9] = pba_ptr & 0xF; /* put a null character on the end of our string */ pba_num[10] = '\0'; /* switch all the data but the '-' to hex char */ for (offset = 0; offset < 10; offset++) { if (pba_num[offset] < 0xA) pba_num[offset] += '0'; else if (pba_num[offset] < 0x10) pba_num[offset] += 'A' - 0xA; } return E1000_SUCCESS; } ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } if (length == 0xFFFF || length == 0) { DEBUGOUT("NVM PBA number section invalid length\n"); return -E1000_ERR_NVM_PBA_SECTION; } /* check if pba_num buffer is big enough */ if (pba_num_size < (((u32)length * 2) - 1)) { DEBUGOUT("PBA string buffer too small\n"); return -E1000_ERR_NO_SPACE; } /* trim pba length from start of string */ pba_ptr++; length--; for (offset = 0; offset < length; offset++) { ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } pba_num[offset * 2] = (u8)(nvm_data >> 8); pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); } pba_num[offset * 2] = '\0'; return E1000_SUCCESS; } /** * e1000_read_pba_length_generic - Read device part number length * @hw: pointer to the HW structure * @pba_num_size: size of part number buffer * * Reads the product board assembly (PBA) number length from the EEPROM and * stores the value in pba_num_size. **/ s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size) { s32 ret_val; u16 nvm_data; u16 pba_ptr; u16 length; DEBUGFUNC("e1000_read_pba_length_generic"); if (pba_num_size == NULL) { DEBUGOUT("PBA buffer size was null\n"); return -E1000_ERR_INVALID_ARGUMENT; } ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } /* if data is not ptr guard the PBA must be in legacy format */ if (nvm_data != NVM_PBA_PTR_GUARD) { *pba_num_size = E1000_PBANUM_LENGTH; return E1000_SUCCESS; } ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } if (length == 0xFFFF || length == 0) { DEBUGOUT("NVM PBA number section invalid length\n"); return -E1000_ERR_NVM_PBA_SECTION; } /* Convert from length in u16 values to u8 chars, add 1 for NULL, * and subtract 2 because length field is included in length. */ *pba_num_size = ((u32)length * 2) - 1; return E1000_SUCCESS; } /** * e1000_read_mac_addr_generic - Read device MAC address * @hw: pointer to the HW structure * * Reads the device MAC address from the EEPROM and stores the value. * Since devices with two ports use the same EEPROM, we increment the * last bit in the MAC address for the second port. **/ s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) { u32 rar_high; u32 rar_low; u16 i; rar_high = E1000_READ_REG(hw, E1000_RAH(0)); rar_low = E1000_READ_REG(hw, E1000_RAL(0)); for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); for (i = 0; i < ETH_ADDR_LEN; i++) hw->mac.addr[i] = hw->mac.perm_addr[i]; return E1000_SUCCESS; } /** * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum * @hw: pointer to the HW structure * * Calculates the EEPROM checksum by reading/adding each word of the EEPROM * and then verifies that the sum of the EEPROM is equal to 0xBABA. **/ s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw) { s32 ret_val; u16 checksum = 0; u16 i, nvm_data; DEBUGFUNC("e1000_validate_nvm_checksum_generic"); for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; } checksum += nvm_data; } if (checksum != (u16) NVM_SUM) { DEBUGOUT("NVM Checksum Invalid\n"); return -E1000_ERR_NVM; } return E1000_SUCCESS; } /** * e1000_update_nvm_checksum_generic - Update EEPROM checksum * @hw: pointer to the HW structure * * Updates the EEPROM checksum by reading/adding each word of the EEPROM * up to the checksum. Then calculates the EEPROM checksum and writes the * value to the EEPROM. **/ s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw) { s32 ret_val; u16 checksum = 0; u16 i, nvm_data; DEBUGFUNC("e1000_update_nvm_checksum"); for (i = 0; i < NVM_CHECKSUM_REG; i++) { ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); if (ret_val) { DEBUGOUT("NVM Read Error while updating checksum.\n"); return ret_val; } checksum += nvm_data; } checksum = (u16) NVM_SUM - checksum; ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); if (ret_val) DEBUGOUT("NVM Write Error while updating checksum.\n"); return ret_val; } /** * e1000_reload_nvm_generic - Reloads EEPROM * @hw: pointer to the HW structure * * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the * extended control register. **/ static void e1000_reload_nvm_generic(struct e1000_hw *hw) { u32 ctrl_ext; DEBUGFUNC("e1000_reload_nvm_generic"); usec_delay(10); ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); } /** * e1000_get_fw_version - Get firmware version information * @hw: pointer to the HW structure * @fw_vers: pointer to output version structure * * unsupported/not present features return 0 in version structure **/ void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) { u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; u8 q, hval, rem, result; u16 comb_verh, comb_verl, comb_offset; memset(fw_vers, 0, sizeof(struct e1000_fw_version)); /* basic eeprom version numbers, bits used vary by part and by tool * used to create the nvm images */ /* Check which data format we have */ hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); switch (hw->mac.type) { case e1000_i211: e1000_read_invm_version(hw, fw_vers); return; case e1000_82575: case e1000_82576: case e1000_82580: /* Use this format, unless EETRACK ID exists, * then use alternate format */ if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) >> NVM_MAJOR_SHIFT; fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) >> NVM_MINOR_SHIFT; fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); goto etrack_id; } break; case e1000_i210: if (!(e1000_get_flash_presence_i210(hw))) { e1000_read_invm_version(hw, fw_vers); return; } /* fall through */ case e1000_i350: case e1000_i354: /* find combo image version */ hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); if ((comb_offset != 0x0) && (comb_offset != NVM_VER_INVALID)) { hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset + 1), 1, &comb_verh); hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), 1, &comb_verl); /* get Option Rom version if it exists and is valid */ if ((comb_verh && comb_verl) && ((comb_verh != NVM_VER_INVALID) && (comb_verl != NVM_VER_INVALID))) { fw_vers->or_valid = true; fw_vers->or_major = comb_verl >> NVM_COMB_VER_SHFT; fw_vers->or_build = (comb_verl << NVM_COMB_VER_SHFT) | (comb_verh >> NVM_COMB_VER_SHFT); fw_vers->or_patch = comb_verh & NVM_COMB_VER_MASK; } } break; default: return; } hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) >> NVM_MAJOR_SHIFT; /* check for old style version format in newer images*/ if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { eeprom_verl = (fw_version & NVM_COMB_VER_MASK); } else { eeprom_verl = (fw_version & NVM_MINOR_MASK) >> NVM_MINOR_SHIFT; } /* Convert minor value to hex before assigning to output struct * Val to be converted will not be higher than 99, per tool output */ q = eeprom_verl / NVM_HEX_CONV; hval = q * NVM_HEX_TENS; rem = eeprom_verl % NVM_HEX_CONV; result = hval + rem; fw_vers->eep_minor = result; etrack_id: if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) | eeprom_verl; } return; }