/* SPDX-License-Identifier: BSD-3-Clause * Copyright(c) 2017 Intel Corporation */ #ifndef _RTE_BBDEV_H_ #define _RTE_BBDEV_H_ /** * @file rte_bbdev.h * * Wireless base band device abstraction APIs. * * @warning * @b EXPERIMENTAL: this API may change without prior notice * * This API allows an application to discover, configure and use a device to * process operations. An asynchronous API (enqueue, followed by later dequeue) * is used for processing operations. * * The functions in this API are not thread-safe when called on the same * target object (a device, or a queue on a device), with the exception that * one thread can enqueue operations to a queue while another thread dequeues * from the same queue. */ #ifdef __cplusplus extern "C" { #endif #include #include #include #include #include #include #include #include #include "rte_bbdev_op.h" #ifndef RTE_BBDEV_MAX_DEVS #define RTE_BBDEV_MAX_DEVS 128 /**< Max number of devices */ #endif /** Flags indiciate current state of BBDEV device */ enum rte_bbdev_state { RTE_BBDEV_UNUSED, RTE_BBDEV_INITIALIZED }; /** * Get the total number of devices that have been successfully initialised. * * @return * The total number of usable devices. */ uint16_t __rte_experimental rte_bbdev_count(void); /** * Check if a device is valid. * * @param dev_id * The identifier of the device. * * @return * true if device ID is valid and device is attached, false otherwise. */ bool __rte_experimental rte_bbdev_is_valid(uint16_t dev_id); /** * Get the next enabled device. * * @param dev_id * The current device * * @return * - The next device, or * - RTE_BBDEV_MAX_DEVS if none found */ uint16_t __rte_experimental rte_bbdev_find_next(uint16_t dev_id); /** Iterate through all enabled devices */ #define RTE_BBDEV_FOREACH(i) for (i = rte_bbdev_find_next(-1); \ i < RTE_BBDEV_MAX_DEVS; \ i = rte_bbdev_find_next(i)) /** * Setup up device queues. * This function must be called on a device before setting up the queues and * starting the device. It can also be called when a device is in the stopped * state. If any device queues have been configured their configuration will be * cleared by a call to this function. * * @param dev_id * The identifier of the device. * @param num_queues * Number of queues to configure on device. * @param socket_id * ID of a socket which will be used to allocate memory. * * @return * - 0 on success * - -ENODEV if dev_id is invalid or the device is corrupted * - -EINVAL if num_queues is invalid, 0 or greater than maximum * - -EBUSY if the identified device has already started * - -ENOMEM if unable to allocate memory */ int __rte_experimental rte_bbdev_setup_queues(uint16_t dev_id, uint16_t num_queues, int socket_id); /** * Enable interrupts. * This function may be called before starting the device to enable the * interrupts if they are available. * * @param dev_id * The identifier of the device. * * @return * - 0 on success * - -ENODEV if dev_id is invalid or the device is corrupted * - -EBUSY if the identified device has already started * - -ENOTSUP if the interrupts are not supported by the device */ int __rte_experimental rte_bbdev_intr_enable(uint16_t dev_id); /** Device queue configuration structure */ struct rte_bbdev_queue_conf { int socket; /**< NUMA socket used for memory allocation */ uint32_t queue_size; /**< Size of queue */ uint8_t priority; /**< Queue priority */ bool deferred_start; /**< Do not start queue when device is started. */ enum rte_bbdev_op_type op_type; /**< Operation type */ }; /** * Configure a queue on a device. * This function can be called after device configuration, and before starting. * It can also be called when the device or the queue is in the stopped state. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * @param conf * The queue configuration. If NULL, a default configuration will be used. * * @return * - 0 on success * - EINVAL if the identified queue size or priority are invalid * - EBUSY if the identified queue or its device have already started */ int __rte_experimental rte_bbdev_queue_configure(uint16_t dev_id, uint16_t queue_id, const struct rte_bbdev_queue_conf *conf); /** * Start a device. * This is the last step needed before enqueueing operations is possible. * * @param dev_id * The identifier of the device. * * @return * - 0 on success * - negative value on failure - as returned from PMD driver */ int __rte_experimental rte_bbdev_start(uint16_t dev_id); /** * Stop a device. * The device can be reconfigured, and restarted after being stopped. * * @param dev_id * The identifier of the device. * * @return * - 0 on success */ int __rte_experimental rte_bbdev_stop(uint16_t dev_id); /** * Close a device. * The device cannot be restarted without reconfiguration! * * @param dev_id * The identifier of the device. * * @return * - 0 on success */ int __rte_experimental rte_bbdev_close(uint16_t dev_id); /** * Start a specified queue on a device. * This is only needed if the queue has been stopped, or if the deferred_start * flag has been set when configuring the queue. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * * @return * - 0 on success * - negative value on failure - as returned from PMD driver */ int __rte_experimental rte_bbdev_queue_start(uint16_t dev_id, uint16_t queue_id); /** * Stop a specified queue on a device, to allow re configuration. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * * @return * - 0 on success * - negative value on failure - as returned from PMD driver */ int __rte_experimental rte_bbdev_queue_stop(uint16_t dev_id, uint16_t queue_id); /** Device statistics. */ struct rte_bbdev_stats { uint64_t enqueued_count; /**< Count of all operations enqueued */ uint64_t dequeued_count; /**< Count of all operations dequeued */ /** Total error count on operations enqueued */ uint64_t enqueue_err_count; /** Total error count on operations dequeued */ uint64_t dequeue_err_count; /** Offload time */ uint64_t offload_time; }; /** * Retrieve the general I/O statistics of a device. * * @param dev_id * The identifier of the device. * @param stats * Pointer to structure to where statistics will be copied. On error, this * location may or may not have been modified. * * @return * - 0 on success * - EINVAL if invalid parameter pointer is provided */ int __rte_experimental rte_bbdev_stats_get(uint16_t dev_id, struct rte_bbdev_stats *stats); /** * Reset the statistics of a device. * * @param dev_id * The identifier of the device. * @return * - 0 on success */ int __rte_experimental rte_bbdev_stats_reset(uint16_t dev_id); /** Device information supplied by the device's driver */ struct rte_bbdev_driver_info { /** Driver name */ const char *driver_name; /** Maximum number of queues supported by the device */ unsigned int max_num_queues; /** Queue size limit (queue size must also be power of 2) */ uint32_t queue_size_lim; /** Set if device off-loads operation to hardware */ bool hardware_accelerated; /** Max value supported by queue priority for DL */ uint8_t max_dl_queue_priority; /** Max value supported by queue priority for UL */ uint8_t max_ul_queue_priority; /** Set if device supports per-queue interrupts */ bool queue_intr_supported; /** Minimum alignment of buffers, in bytes */ uint16_t min_alignment; /** Default queue configuration used if none is supplied */ struct rte_bbdev_queue_conf default_queue_conf; /** Device operation capabilities */ const struct rte_bbdev_op_cap *capabilities; /** Device cpu_flag requirements */ const enum rte_cpu_flag_t *cpu_flag_reqs; }; /** Macro used at end of bbdev PMD list */ #define RTE_BBDEV_END_OF_CAPABILITIES_LIST() \ { RTE_BBDEV_OP_NONE } /** * Device information structure used by an application to discover a devices * capabilities and current configuration */ struct rte_bbdev_info { int socket_id; /**< NUMA socket that device is on */ const char *dev_name; /**< Unique device name */ const struct rte_bus *bus; /**< Bus information */ uint16_t num_queues; /**< Number of queues currently configured */ bool started; /**< Set if device is currently started */ struct rte_bbdev_driver_info drv; /**< Info from device driver */ }; /** * Retrieve information about a device. * * @param dev_id * The identifier of the device. * @param dev_info * Pointer to structure to where information will be copied. On error, this * location may or may not have been modified. * * @return * - 0 on success * - EINVAL if invalid parameter pointer is provided */ int __rte_experimental rte_bbdev_info_get(uint16_t dev_id, struct rte_bbdev_info *dev_info); /** Queue information */ struct rte_bbdev_queue_info { /** Current device configuration */ struct rte_bbdev_queue_conf conf; /** Set if queue is currently started */ bool started; }; /** * Retrieve information about a specific queue on a device. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * @param queue_info * Pointer to structure to where information will be copied. On error, this * location may or may not have been modified. * * @return * - 0 on success * - EINVAL if invalid parameter pointer is provided */ int __rte_experimental rte_bbdev_queue_info_get(uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_queue_info *queue_info); /** @internal The data structure associated with each queue of a device. */ struct rte_bbdev_queue_data { void *queue_private; /**< Driver-specific per-queue data */ struct rte_bbdev_queue_conf conf; /**< Current configuration */ struct rte_bbdev_stats queue_stats; /**< Queue statistics */ bool started; /**< Queue state */ }; /** @internal Enqueue encode operations for processing on queue of a device. */ typedef uint16_t (*rte_bbdev_enqueue_enc_ops_t)( struct rte_bbdev_queue_data *q_data, struct rte_bbdev_enc_op **ops, uint16_t num); /** @internal Enqueue decode operations for processing on queue of a device. */ typedef uint16_t (*rte_bbdev_enqueue_dec_ops_t)( struct rte_bbdev_queue_data *q_data, struct rte_bbdev_dec_op **ops, uint16_t num); /** @internal Dequeue encode operations from a queue of a device. */ typedef uint16_t (*rte_bbdev_dequeue_enc_ops_t)( struct rte_bbdev_queue_data *q_data, struct rte_bbdev_enc_op **ops, uint16_t num); /** @internal Dequeue decode operations from a queue of a device. */ typedef uint16_t (*rte_bbdev_dequeue_dec_ops_t)( struct rte_bbdev_queue_data *q_data, struct rte_bbdev_dec_op **ops, uint16_t num); #define RTE_BBDEV_NAME_MAX_LEN 64 /**< Max length of device name */ /** * @internal The data associated with a device, with no function pointers. * This structure is safe to place in shared memory to be common among * different processes in a multi-process configuration. Drivers can access * these fields, but should never write to them! */ struct rte_bbdev_data { char name[RTE_BBDEV_NAME_MAX_LEN]; /**< Unique identifier name */ void *dev_private; /**< Driver-specific private data */ uint16_t num_queues; /**< Number of currently configured queues */ struct rte_bbdev_queue_data *queues; /**< Queue structures */ uint16_t dev_id; /**< Device ID */ int socket_id; /**< NUMA socket that device is on */ bool started; /**< Device run-time state */ /** Counter of processes using the device */ rte_atomic16_t process_cnt; }; /* Forward declarations */ struct rte_bbdev_ops; struct rte_bbdev_callback; struct rte_intr_handle; /** Structure to keep track of registered callbacks */ TAILQ_HEAD(rte_bbdev_cb_list, rte_bbdev_callback); /** * @internal The data structure associated with a device. Drivers can access * these fields, but should only write to the *_ops fields. */ struct __rte_cache_aligned rte_bbdev { /**< Enqueue encode function */ rte_bbdev_enqueue_enc_ops_t enqueue_enc_ops; /**< Enqueue decode function */ rte_bbdev_enqueue_dec_ops_t enqueue_dec_ops; /**< Dequeue encode function */ rte_bbdev_dequeue_enc_ops_t dequeue_enc_ops; /**< Dequeue decode function */ rte_bbdev_dequeue_dec_ops_t dequeue_dec_ops; const struct rte_bbdev_ops *dev_ops; /**< Functions exported by PMD */ struct rte_bbdev_data *data; /**< Pointer to device data */ enum rte_bbdev_state state; /**< If device is currently used or not */ struct rte_device *device; /**< Backing device */ /** User application callback for interrupts if present */ struct rte_bbdev_cb_list list_cbs; struct rte_intr_handle *intr_handle; /**< Device interrupt handle */ }; /** @internal array of all devices */ extern struct rte_bbdev rte_bbdev_devices[]; /** * Enqueue a burst of processed encode operations to a queue of the device. * This functions only enqueues as many operations as currently possible and * does not block until @p num_ops entries in the queue are available. * This function does not provide any error notification to avoid the * corresponding overhead. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * @param ops * Pointer array containing operations to be enqueued Must have at least * @p num_ops entries * @param num_ops * The maximum number of operations to enqueue. * * @return * The number of operations actually enqueued (this is the number of processed * entries in the @p ops array). */ static inline uint16_t rte_bbdev_enqueue_enc_ops(uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_enc_op **ops, uint16_t num_ops) { struct rte_bbdev *dev = &rte_bbdev_devices[dev_id]; struct rte_bbdev_queue_data *q_data = &dev->data->queues[queue_id]; return dev->enqueue_enc_ops(q_data, ops, num_ops); } /** * Enqueue a burst of processed decode operations to a queue of the device. * This functions only enqueues as many operations as currently possible and * does not block until @p num_ops entries in the queue are available. * This function does not provide any error notification to avoid the * corresponding overhead. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * @param ops * Pointer array containing operations to be enqueued Must have at least * @p num_ops entries * @param num_ops * The maximum number of operations to enqueue. * * @return * The number of operations actually enqueued (this is the number of processed * entries in the @p ops array). */ static inline uint16_t rte_bbdev_enqueue_dec_ops(uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_dec_op **ops, uint16_t num_ops) { struct rte_bbdev *dev = &rte_bbdev_devices[dev_id]; struct rte_bbdev_queue_data *q_data = &dev->data->queues[queue_id]; return dev->enqueue_dec_ops(q_data, ops, num_ops); } /** * Dequeue a burst of processed encode operations from a queue of the device. * This functions returns only the current contents of the queue, and does not * block until @ num_ops is available. * This function does not provide any error notification to avoid the * corresponding overhead. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * @param ops * Pointer array where operations will be dequeued to. Must have at least * @p num_ops entries * @param num_ops * The maximum number of operations to dequeue. * * @return * The number of operations actually dequeued (this is the number of entries * copied into the @p ops array). */ static inline uint16_t rte_bbdev_dequeue_enc_ops(uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_enc_op **ops, uint16_t num_ops) { struct rte_bbdev *dev = &rte_bbdev_devices[dev_id]; struct rte_bbdev_queue_data *q_data = &dev->data->queues[queue_id]; return dev->dequeue_enc_ops(q_data, ops, num_ops); } /** * Dequeue a burst of processed decode operations from a queue of the device. * This functions returns only the current contents of the queue, and does not * block until @ num_ops is available. * This function does not provide any error notification to avoid the * corresponding overhead. * * @param dev_id * The identifier of the device. * @param queue_id * The index of the queue. * @param ops * Pointer array where operations will be dequeued to. Must have at least * @p num_ops entries * @param num_ops * The maximum number of operations to dequeue. * * @return * The number of operations actually dequeued (this is the number of entries * copied into the @p ops array). */ static inline uint16_t rte_bbdev_dequeue_dec_ops(uint16_t dev_id, uint16_t queue_id, struct rte_bbdev_dec_op **ops, uint16_t num_ops) { struct rte_bbdev *dev = &rte_bbdev_devices[dev_id]; struct rte_bbdev_queue_data *q_data = &dev->data->queues[queue_id]; return dev->dequeue_dec_ops(q_data, ops, num_ops); } /** Definitions of device event types */ enum rte_bbdev_event_type { RTE_BBDEV_EVENT_UNKNOWN, /**< unknown event type */ RTE_BBDEV_EVENT_ERROR, /**< error interrupt event */ RTE_BBDEV_EVENT_DEQUEUE, /**< dequeue event */ RTE_BBDEV_EVENT_MAX /**< max value of this enum */ }; /** * Typedef for application callback function registered by application * software for notification of device events * * @param dev_id * Device identifier * @param event * Device event to register for notification of. * @param cb_arg * User specified parameter to be passed to user's callback function. * @param ret_param * To pass data back to user application. */ typedef void (*rte_bbdev_cb_fn)(uint16_t dev_id, enum rte_bbdev_event_type event, void *cb_arg, void *ret_param); /** * Register a callback function for specific device id. Multiple callbacks can * be added and will be called in the order they are added when an event is * triggered. Callbacks are called in a separate thread created by the DPDK EAL. * * @param dev_id * Device id. * @param event * The event that the callback will be registered for. * @param cb_fn * User supplied callback function to be called. * @param cb_arg * Pointer to parameter that will be passed to the callback. * * @return * Zero on success, negative value on failure. */ int __rte_experimental rte_bbdev_callback_register(uint16_t dev_id, enum rte_bbdev_event_type event, rte_bbdev_cb_fn cb_fn, void *cb_arg); /** * Unregister a callback function for specific device id. * * @param dev_id * The device identifier. * @param event * The event that the callback will be unregistered for. * @param cb_fn * User supplied callback function to be unregistered. * @param cb_arg * Pointer to the parameter supplied when registering the callback. * (void *)-1 means to remove all registered callbacks with the specified * function address. * * @return * - 0 on success * - EINVAL if invalid parameter pointer is provided * - EAGAIN if the provided callback pointer does not exist */ int __rte_experimental rte_bbdev_callback_unregister(uint16_t dev_id, enum rte_bbdev_event_type event, rte_bbdev_cb_fn cb_fn, void *cb_arg); /** * Enable a one-shot interrupt on the next operation enqueued to a particular * queue. The interrupt will be triggered when the operation is ready to be * dequeued. To handle the interrupt, an epoll file descriptor must be * registered using rte_bbdev_queue_intr_ctl(), and then an application * thread/lcore can wait for the interrupt using rte_epoll_wait(). * * @param dev_id * The device identifier. * @param queue_id * The index of the queue. * * @return * - 0 on success * - negative value on failure - as returned from PMD driver */ int __rte_experimental rte_bbdev_queue_intr_enable(uint16_t dev_id, uint16_t queue_id); /** * Disable a one-shot interrupt on the next operation enqueued to a particular * queue (if it has been enabled). * * @param dev_id * The device identifier. * @param queue_id * The index of the queue. * * @return * - 0 on success * - negative value on failure - as returned from PMD driver */ int __rte_experimental rte_bbdev_queue_intr_disable(uint16_t dev_id, uint16_t queue_id); /** * Control interface for per-queue interrupts. * * @param dev_id * The device identifier. * @param queue_id * The index of the queue. * @param epfd * Epoll file descriptor that will be associated with the interrupt source. * If the special value RTE_EPOLL_PER_THREAD is provided, a per thread epoll * file descriptor created by the EAL is used (RTE_EPOLL_PER_THREAD can also * be used when calling rte_epoll_wait()). * @param op * The operation be performed for the vector.RTE_INTR_EVENT_ADD or * RTE_INTR_EVENT_DEL. * @param data * User context, that will be returned in the epdata.data field of the * rte_epoll_event structure filled in by rte_epoll_wait(). * * @return * - 0 on success * - ENOTSUP if interrupts are not supported by the identified device * - negative value on failure - as returned from PMD driver */ int __rte_experimental rte_bbdev_queue_intr_ctl(uint16_t dev_id, uint16_t queue_id, int epfd, int op, void *data); #ifdef __cplusplus } #endif #endif /* _RTE_BBDEV_H_ */