/* SPDX-License-Identifier: BSD-3-Clause * Copyright(c) 2017-2018 Intel Corporation */ #ifndef _RTE_COMP_H_ #define _RTE_COMP_H_ /** * @file rte_comp.h * * RTE definitions for Data Compression Service * */ #ifdef __cplusplus extern "C" { #endif #include #include /** * compression service feature flags * * @note New features flags should be added to the end of the list * * Keep these flags synchronised with rte_comp_get_feature_name() */ #define RTE_COMP_FF_STATEFUL_COMPRESSION (1ULL << 0) /**< Stateful compression is supported */ #define RTE_COMP_FF_STATEFUL_DECOMPRESSION (1ULL << 1) /**< Stateful decompression is supported */ #define RTE_COMP_FF_OOP_SGL_IN_SGL_OUT (1ULL << 2) /**< Out-of-place Scatter-gather (SGL) buffers, * with multiple segments, are supported in input and output */ #define RTE_COMP_FF_OOP_SGL_IN_LB_OUT (1ULL << 3) /**< Out-of-place Scatter-gather (SGL) buffers are supported * in input, combined with linear buffers (LB), with a * single segment, in output */ #define RTE_COMP_FF_OOP_LB_IN_SGL_OUT (1ULL << 4) /**< Out-of-place Scatter-gather (SGL) buffers are supported * in output, combined with linear buffers (LB) in input */ #define RTE_COMP_FF_ADLER32_CHECKSUM (1ULL << 5) /**< Adler-32 Checksum is supported */ #define RTE_COMP_FF_CRC32_CHECKSUM (1ULL << 6) /**< CRC32 Checksum is supported */ #define RTE_COMP_FF_CRC32_ADLER32_CHECKSUM (1ULL << 7) /**< Adler-32/CRC32 Checksum is supported */ #define RTE_COMP_FF_MULTI_PKT_CHECKSUM (1ULL << 8) /**< Generation of checksum across multiple stateless packets is supported */ #define RTE_COMP_FF_SHA1_HASH (1ULL << 9) /**< SHA1 Hash is supported */ #define RTE_COMP_FF_SHA2_SHA256_HASH (1ULL << 10) /**< SHA256 Hash of SHA2 family is supported */ #define RTE_COMP_FF_NONCOMPRESSED_BLOCKS (1ULL << 11) /**< Creation of non-compressed blocks using RTE_COMP_LEVEL_NONE is supported */ #define RTE_COMP_FF_SHAREABLE_PRIV_XFORM (1ULL << 12) /**< Private xforms created by the PMD can be shared * across multiple stateless operations. If not set, then app needs * to create as many priv_xforms as it expects to have stateless * operations in-flight. */ #define RTE_COMP_FF_HUFFMAN_FIXED (1ULL << 13) /**< Fixed huffman encoding is supported */ #define RTE_COMP_FF_HUFFMAN_DYNAMIC (1ULL << 14) /**< Dynamic huffman encoding is supported */ /** Status of comp operation */ enum rte_comp_op_status { RTE_COMP_OP_STATUS_SUCCESS = 0, /**< Operation completed successfully */ RTE_COMP_OP_STATUS_NOT_PROCESSED, /**< Operation has not yet been processed by the device */ RTE_COMP_OP_STATUS_INVALID_ARGS, /**< Operation failed due to invalid arguments in request */ RTE_COMP_OP_STATUS_ERROR, /**< Error handling operation */ RTE_COMP_OP_STATUS_INVALID_STATE, /**< Operation is invoked in invalid state */ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED, /**< Output buffer ran out of space before operation completed. * Error case. Application must resubmit all data with a larger * output buffer. */ RTE_COMP_OP_STATUS_OUT_OF_SPACE_RECOVERABLE, /**< Output buffer ran out of space before operation completed, but this * is not an error case. Output data up to op.produced can be used and * next op in the stream should continue on from op.consumed+1. */ }; /** Compression Algorithms */ enum rte_comp_algorithm { RTE_COMP_ALGO_UNSPECIFIED = 0, /** No Compression algorithm */ RTE_COMP_ALGO_NULL, /**< No compression. * Pass-through, data is copied unchanged from source buffer to * destination buffer. */ RTE_COMP_ALGO_DEFLATE, /**< DEFLATE compression algorithm * https://tools.ietf.org/html/rfc1951 */ RTE_COMP_ALGO_LZS, /**< LZS compression algorithm * https://tools.ietf.org/html/rfc2395 */ RTE_COMP_ALGO_LIST_END }; /** Compression Hash Algorithms */ enum rte_comp_hash_algorithm { RTE_COMP_HASH_ALGO_NONE = 0, /**< No hash */ RTE_COMP_HASH_ALGO_SHA1, /**< SHA1 hash algorithm */ RTE_COMP_HASH_ALGO_SHA2_256, /**< SHA256 hash algorithm of SHA2 family */ RTE_COMP_HASH_ALGO_LIST_END }; /**< Compression Level. * The number is interpreted by each PMD differently. However, lower numbers * give fastest compression, at the expense of compression ratio while * higher numbers may give better compression ratios but are likely slower. */ #define RTE_COMP_LEVEL_PMD_DEFAULT (-1) /** Use PMD Default */ #define RTE_COMP_LEVEL_NONE (0) /** Output uncompressed blocks if supported by the specified algorithm */ #define RTE_COMP_LEVEL_MIN (1) /** Use minimum compression level supported by the PMD */ #define RTE_COMP_LEVEL_MAX (9) /** Use maximum compression level supported by the PMD */ /** Compression checksum types */ enum rte_comp_checksum_type { RTE_COMP_CHECKSUM_NONE, /**< No checksum generated */ RTE_COMP_CHECKSUM_CRC32, /**< Generates a CRC32 checksum, as used by gzip */ RTE_COMP_CHECKSUM_ADLER32, /**< Generates an Adler-32 checksum, as used by zlib */ RTE_COMP_CHECKSUM_CRC32_ADLER32, /**< Generates both Adler-32 and CRC32 checksums, concatenated. * CRC32 is in the lower 32bits, Adler-32 in the upper 32 bits. */ }; /** Compression Huffman Type - used by DEFLATE algorithm */ enum rte_comp_huffman { RTE_COMP_HUFFMAN_DEFAULT, /**< PMD may choose which Huffman codes to use */ RTE_COMP_HUFFMAN_FIXED, /**< Use Fixed Huffman codes */ RTE_COMP_HUFFMAN_DYNAMIC, /**< Use Dynamic Huffman codes */ }; /** Compression flush flags */ enum rte_comp_flush_flag { RTE_COMP_FLUSH_NONE, /**< Data is not flushed. Output may remain in the compressor and be * processed during a following op. It may not be possible to decompress * output until a later op with some other flush flag has been sent. */ RTE_COMP_FLUSH_SYNC, /**< All data should be flushed to output buffer. Output data can be * decompressed. However state and history is not cleared, so future * operations may use history from this operation. */ RTE_COMP_FLUSH_FULL, /**< All data should be flushed to output buffer. Output data can be * decompressed. State and history data is cleared, so future * ops will be independent of ops processed before this. */ RTE_COMP_FLUSH_FINAL /**< Same as RTE_COMP_FLUSH_FULL but if op.algo is RTE_COMP_ALGO_DEFLATE * then bfinal bit is set in the last block. */ }; /** Compression transform types */ enum rte_comp_xform_type { RTE_COMP_COMPRESS, /**< Compression service - compress */ RTE_COMP_DECOMPRESS, /**< Compression service - decompress */ }; /** Compression operation type */ enum rte_comp_op_type { RTE_COMP_OP_STATELESS, /**< All data to be processed is submitted in the op, no state or * history from previous ops is used and none will be stored for future * ops. Flush flag must be set to either FLUSH_FULL or FLUSH_FINAL. */ RTE_COMP_OP_STATEFUL /**< There may be more data to be processed after this op, it's part of * a stream of data. State and history from previous ops can be used * and resulting state and history can be stored for future ops, * depending on flush flag. */ }; /** Parameters specific to the deflate algorithm */ struct rte_comp_deflate_params { enum rte_comp_huffman huffman; /**< Compression huffman encoding type */ }; /** Setup Data for compression */ struct rte_comp_compress_xform { enum rte_comp_algorithm algo; /**< Algorithm to use for compress operation */ union { struct rte_comp_deflate_params deflate; /**< Parameters specific to the deflate algorithm */ }; /**< Algorithm specific parameters */ int level; /**< Compression level */ uint8_t window_size; /**< Base two log value of sliding window to be used. If window size * can't be supported by the PMD then it may fall back to a smaller * size. This is likely to result in a worse compression ratio. */ enum rte_comp_checksum_type chksum; /**< Type of checksum to generate on the uncompressed data */ enum rte_comp_hash_algorithm hash_algo; /**< Hash algorithm to be used with compress operation. Hash is always * done on plaintext. */ }; /** * Setup Data for decompression. */ struct rte_comp_decompress_xform { enum rte_comp_algorithm algo; /**< Algorithm to use for decompression */ enum rte_comp_checksum_type chksum; /**< Type of checksum to generate on the decompressed data */ uint8_t window_size; /**< Base two log value of sliding window which was used to generate * compressed data. If window size can't be supported by the PMD then * setup of stream or private_xform should fail. */ enum rte_comp_hash_algorithm hash_algo; /**< Hash algorithm to be used with decompress operation. Hash is always * done on plaintext. */ }; /** * Compression transform structure. * * This is used to specify the compression transforms required. * Each transform structure can hold a single transform, the type field is * used to specify which transform is contained within the union. */ struct rte_comp_xform { enum rte_comp_xform_type type; /**< xform type */ union { struct rte_comp_compress_xform compress; /**< xform for compress operation */ struct rte_comp_decompress_xform decompress; /**< decompress xform */ }; }; /** * Compression Operation. * * This structure contains data relating to performing a compression * operation on the referenced mbuf data buffers. * * Comp operations are enqueued and dequeued in comp PMDs using the * rte_compressdev_enqueue_burst() / rte_compressdev_dequeue_burst() APIs */ struct rte_comp_op { enum rte_comp_op_type op_type; union { void *private_xform; /**< Stateless private PMD data derived from an rte_comp_xform. * A handle returned by rte_compressdev_private_xform_create() * must be attached to operations of op_type RTE_COMP_STATELESS. */ void *stream; /**< Private PMD data derived initially from an rte_comp_xform, * which holds state and history data and evolves as operations * are processed. rte_compressdev_stream_create() must be called * on a device for all STATEFUL data streams and the resulting * stream attached to the one or more operations associated * with the data stream. * All operations in a stream must be sent to the same device. */ }; struct rte_mempool *mempool; /**< Pool from which operation is allocated */ rte_iova_t iova_addr; /**< IOVA address of this operation */ struct rte_mbuf *m_src; /**< source mbuf * The total size of the input buffer(s) can be retrieved using * rte_pktmbuf_data_len(m_src). The max data size which can fit in a * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1. * If the input data is bigger than this it can be passed to the PMD in * a chain of mbufs if the PMD's capabilities indicate it supports this. */ struct rte_mbuf *m_dst; /**< destination mbuf * The total size of the output buffer(s) can be retrieved using * rte_pktmbuf_data_len(m_dst). The max data size which can fit in a * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1. * If the output data is expected to be bigger than this a chain of * mbufs can be passed to the PMD if the PMD's capabilities indicate * it supports this. */ struct { uint32_t offset; /**< Starting point for compression or decompression, * specified as number of bytes from start of packet in * source buffer. * This offset starts from the first segment * of the buffer, in case the m_src is a chain of mbufs. * Starting point for checksum generation in compress direction. */ uint32_t length; /**< The length, in bytes, of the data in source buffer * to be compressed or decompressed. * Also the length of the data over which the checksum * should be generated in compress direction */ } src; struct { uint32_t offset; /**< Starting point for writing output data, specified as * number of bytes from start of packet in dest * buffer. * This offset starts from the first segment * of the buffer, in case the m_dst is a chain of mbufs. * Starting point for checksum generation in * decompress direction. */ } dst; struct { uint8_t *digest; /**< Output buffer to store hash output, if enabled in xform. * Buffer would contain valid value only after an op with * flush flag = RTE_COMP_FLUSH_FULL/FLUSH_FINAL is processed * successfully. * * Length of buffer should be contiguous and large enough to * accommodate digest produced by specific hash algo. */ rte_iova_t iova_addr; /**< IO address of the buffer */ } hash; enum rte_comp_flush_flag flush_flag; /**< Defines flush characteristics for the output data. * Only applicable in compress direction */ uint64_t input_chksum; /**< An input checksum can be provided to generate a * cumulative checksum across sequential blocks in a STATELESS stream. * Checksum type is as specified in xform chksum_type */ uint64_t output_chksum; /**< If a checksum is generated it will be written in here. * Checksum type is as specified in xform chksum_type. */ uint32_t consumed; /**< The number of bytes from the source buffer * which were compressed/decompressed. */ uint32_t produced; /**< The number of bytes written to the destination buffer * which were compressed/decompressed. */ uint64_t debug_status; /**< * Status of the operation is returned in the status param. * This field allows the PMD to pass back extra * pmd-specific debug information. Value is not defined on the API. */ uint8_t status; /**< * Operation status - use values from enum rte_comp_status. * This is reset to * RTE_COMP_OP_STATUS_NOT_PROCESSED on allocation from mempool and * will be set to RTE_COMP_OP_STATUS_SUCCESS after operation * is successfully processed by a PMD */ } __rte_cache_aligned; /** * Creates an operation pool * * @param name * Compress pool name * @param nb_elts * Number of elements in pool * @param cache_size * Number of elements to cache on lcore, see * *rte_mempool_create* for further details about cache size * @param user_size * Size of private data to allocate for user with each operation * @param socket_id * Socket to identifier allocate memory on * @return * - On success pointer to mempool * - On failure NULL */ struct rte_mempool * __rte_experimental rte_comp_op_pool_create(const char *name, unsigned int nb_elts, unsigned int cache_size, uint16_t user_size, int socket_id); /** * Allocate an operation from a mempool with default parameters set * * @param mempool * Compress operation mempool * * @return * - On success returns a valid rte_comp_op structure * - On failure returns NULL */ struct rte_comp_op * __rte_experimental rte_comp_op_alloc(struct rte_mempool *mempool); /** * Bulk allocate operations from a mempool with default parameters set * * @param mempool * Compress operation mempool * @param ops * Array to place allocated operations * @param nb_ops * Number of operations to allocate * @return * - 0: Success * - -ENOENT: Not enough entries in the mempool; no ops are retrieved. */ int __rte_experimental rte_comp_op_bulk_alloc(struct rte_mempool *mempool, struct rte_comp_op **ops, uint16_t nb_ops); /** * Free operation structure * If operation has been allocate from a rte_mempool, then the operation will * be returned to the mempool. * * @param op * Compress operation */ void __rte_experimental rte_comp_op_free(struct rte_comp_op *op); /** * Get the name of a compress service feature flag * * @param flag * The mask describing the flag * * @return * The name of this flag, or NULL if it's not a valid feature flag. */ const char * __rte_experimental rte_comp_get_feature_name(uint64_t flag); #ifdef __cplusplus } #endif #endif /* _RTE_COMP_H_ */