/* SPDX-License-Identifier: BSD-3-Clause * Copyright(c) 2017-2018 Intel Corporation */ #ifndef _RTE_COMPRESSDEV_H_ #define _RTE_COMPRESSDEV_H_ /** * @file rte_compressdev.h * * RTE Compression Device APIs * * Defines comp device APIs for the provisioning of compression operations. */ #ifdef __cplusplus extern "C" { #endif #include #include "rte_comp.h" /** * Parameter log base 2 range description. * Final value will be 2^value. */ struct rte_param_log2_range { uint8_t min; /**< Minimum log2 value */ uint8_t max; /**< Maximum log2 value */ uint8_t increment; /**< If a range of sizes are supported, * this parameter is used to indicate * increments in base 2 log byte value * that are supported between the minimum and maximum */ }; /** Structure used to capture a capability of a comp device */ struct rte_compressdev_capabilities { enum rte_comp_algorithm algo; /* Compression algorithm */ uint64_t comp_feature_flags; /**< Bitmask of flags for compression service features */ struct rte_param_log2_range window_size; /**< Window size range in base two log byte values */ }; /** Macro used at end of comp PMD list */ #define RTE_COMP_END_OF_CAPABILITIES_LIST() \ { RTE_COMP_ALGO_UNSPECIFIED } const struct rte_compressdev_capabilities * __rte_experimental rte_compressdev_capability_get(uint8_t dev_id, enum rte_comp_algorithm algo); /** * compression device supported feature flags * * @note New features flags should be added to the end of the list * * Keep these flags synchronised with rte_compressdev_get_feature_name() */ #define RTE_COMPDEV_FF_HW_ACCELERATED (1ULL << 0) /**< Operations are off-loaded to an external hardware accelerator */ #define RTE_COMPDEV_FF_CPU_SSE (1ULL << 1) /**< Utilises CPU SIMD SSE instructions */ #define RTE_COMPDEV_FF_CPU_AVX (1ULL << 2) /**< Utilises CPU SIMD AVX instructions */ #define RTE_COMPDEV_FF_CPU_AVX2 (1ULL << 3) /**< Utilises CPU SIMD AVX2 instructions */ #define RTE_COMPDEV_FF_CPU_AVX512 (1ULL << 4) /**< Utilises CPU SIMD AVX512 instructions */ #define RTE_COMPDEV_FF_CPU_NEON (1ULL << 5) /**< Utilises CPU NEON instructions */ /** * Get the name of a compress device feature flag. * * @param flag * The mask describing the flag * * @return * The name of this flag, or NULL if it's not a valid feature flag. */ const char * __rte_experimental rte_compressdev_get_feature_name(uint64_t flag); /** comp device information */ struct rte_compressdev_info { const char *driver_name; /**< Driver name. */ uint64_t feature_flags; /**< Feature flags */ const struct rte_compressdev_capabilities *capabilities; /**< Array of devices supported capabilities */ uint16_t max_nb_queue_pairs; /**< Maximum number of queues pairs supported by device. * (If 0, there is no limit in maximum number of queue pairs) */ }; /** comp device statistics */ struct rte_compressdev_stats { uint64_t enqueued_count; /**< Count of all operations enqueued */ uint64_t dequeued_count; /**< Count of all operations dequeued */ uint64_t enqueue_err_count; /**< Total error count on operations enqueued */ uint64_t dequeue_err_count; /**< Total error count on operations dequeued */ }; /** * Get the device identifier for the named compress device. * * @param name * Device name to select the device structure * @return * - Returns compress device identifier on success. * - Return -1 on failure to find named compress device. */ int __rte_experimental rte_compressdev_get_dev_id(const char *name); /** * Get the compress device name given a device identifier. * * @param dev_id * Compress device identifier * @return * - Returns compress device name. * - Returns NULL if compress device is not present. */ const char * __rte_experimental rte_compressdev_name_get(uint8_t dev_id); /** * Get the total number of compress devices that have been successfully * initialised. * * @return * - The total number of usable compress devices. */ uint8_t __rte_experimental rte_compressdev_count(void); /** * Get number and identifiers of attached comp devices that * use the same compress driver. * * @param driver_name * Driver name * @param devices * Output devices identifiers * @param nb_devices * Maximal number of devices * * @return * Returns number of attached compress devices. */ uint8_t __rte_experimental rte_compressdev_devices_get(const char *driver_name, uint8_t *devices, uint8_t nb_devices); /* * Return the NUMA socket to which a device is connected. * * @param dev_id * Compress device identifier * @return * The NUMA socket id to which the device is connected or * a default of zero if the socket could not be determined. * -1 if returned is the dev_id value is out of range. */ int __rte_experimental rte_compressdev_socket_id(uint8_t dev_id); /** Compress device configuration structure */ struct rte_compressdev_config { int socket_id; /**< Socket on which to allocate resources */ uint16_t nb_queue_pairs; /**< Total number of queue pairs to configure on a device */ uint16_t max_nb_priv_xforms; /**< Max number of private_xforms which will be created on the device */ uint16_t max_nb_streams; /**< Max number of streams which will be created on the device */ }; /** * Configure a device. * * This function must be invoked first before any other function in the * API. This function can also be re-invoked when a device is in the * stopped state. * * @param dev_id * Compress device identifier * @param config * The compress device configuration * @return * - 0: Success, device configured. * - <0: Error code returned by the driver configuration function. */ int __rte_experimental rte_compressdev_configure(uint8_t dev_id, struct rte_compressdev_config *config); /** * Start a device. * * The device start step is called after configuring the device and setting up * its queue pairs. * On success, data-path functions exported by the API (enqueue/dequeue, etc) * can be invoked. * * @param dev_id * Compress device identifier * @return * - 0: Success, device started. * - <0: Error code of the driver device start function. */ int __rte_experimental rte_compressdev_start(uint8_t dev_id); /** * Stop a device. The device can be restarted with a call to * rte_compressdev_start() * * @param dev_id * Compress device identifier */ void __rte_experimental rte_compressdev_stop(uint8_t dev_id); /** * Close an device. * The memory allocated in the device gets freed. * After calling this function, in order to use * the device again, it is required to * configure the device again. * * @param dev_id * Compress device identifier * * @return * - 0 on successfully closing device * - <0 on failure to close device */ int __rte_experimental rte_compressdev_close(uint8_t dev_id); /** * Allocate and set up a receive queue pair for a device. * This should only be called when the device is stopped. * * * @param dev_id * Compress device identifier * @param queue_pair_id * The index of the queue pairs to set up. The * value must be in the range [0, nb_queue_pair - 1] * previously supplied to rte_compressdev_configure() * @param max_inflight_ops * Max number of ops which the qp will have to * accommodate simultaneously * @param socket_id * The *socket_id* argument is the socket identifier * in case of NUMA. The value can be *SOCKET_ID_ANY* * if there is no NUMA constraint for the DMA memory * allocated for the receive queue pair * @return * - 0: Success, queue pair correctly set up. * - <0: Queue pair configuration failed */ int __rte_experimental rte_compressdev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id, uint32_t max_inflight_ops, int socket_id); /** * Get the number of queue pairs on a specific comp device * * @param dev_id * Compress device identifier * @return * - The number of configured queue pairs. */ uint16_t __rte_experimental rte_compressdev_queue_pair_count(uint8_t dev_id); /** * Retrieve the general I/O statistics of a device. * * @param dev_id * The identifier of the device * @param stats * A pointer to a structure of type * *rte_compressdev_stats* to be filled with the * values of device counters * @return * - Zero if successful. * - Non-zero otherwise. */ int __rte_experimental rte_compressdev_stats_get(uint8_t dev_id, struct rte_compressdev_stats *stats); /** * Reset the general I/O statistics of a device. * * @param dev_id * The identifier of the device. */ void __rte_experimental rte_compressdev_stats_reset(uint8_t dev_id); /** * Retrieve the contextual information of a device. * * @param dev_id * Compress device identifier * @param dev_info * A pointer to a structure of type *rte_compressdev_info* * to be filled with the contextual information of the device * * @note The capabilities field of dev_info is set to point to the first * element of an array of struct rte_compressdev_capabilities. * The element after the last valid element has it's op field set to * RTE_COMP_ALGO_LIST_END. */ void __rte_experimental rte_compressdev_info_get(uint8_t dev_id, struct rte_compressdev_info *dev_info); /** * * Dequeue a burst of processed compression operations from a queue on the comp * device. The dequeued operation are stored in *rte_comp_op* structures * whose pointers are supplied in the *ops* array. * * The rte_compressdev_dequeue_burst() function returns the number of ops * actually dequeued, which is the number of *rte_comp_op* data structures * effectively supplied into the *ops* array. * * A return value equal to *nb_ops* indicates that the queue contained * at least *nb_ops* operations, and this is likely to signify that other * processed operations remain in the devices output queue. Applications * implementing a "retrieve as many processed operations as possible" policy * can check this specific case and keep invoking the * rte_compressdev_dequeue_burst() function until a value less than * *nb_ops* is returned. * * The rte_compressdev_dequeue_burst() function does not provide any error * notification to avoid the corresponding overhead. * * @note: operation ordering is not maintained within the queue pair. * * @note: In case op status = OUT_OF_SPACE_TERMINATED, op.consumed=0 and the * op must be resubmitted with the same input data and a larger output buffer. * op.produced is usually 0, but in decompression cases a PMD may return > 0 * and the application may find it useful to inspect that data. * This status is only returned on STATELESS ops. * * @note: In case op status = OUT_OF_SPACE_RECOVERABLE, op.produced can be used * and next op in stream should continue on from op.consumed+1 with a fresh * output buffer. * Consumed=0, produced=0 is an unusual but allowed case. There may be useful * state/history stored in the PMD, even though no output was produced yet. * * * @param dev_id * Compress device identifier * @param qp_id * The index of the queue pair from which to retrieve * processed operations. The value must be in the range * [0, nb_queue_pair - 1] previously supplied to * rte_compressdev_configure() * @param ops * The address of an array of pointers to * *rte_comp_op* structures that must be * large enough to store *nb_ops* pointers in it * @param nb_ops * The maximum number of operations to dequeue * @return * - The number of operations actually dequeued, which is the number * of pointers to *rte_comp_op* structures effectively supplied to the * *ops* array. */ uint16_t __rte_experimental rte_compressdev_dequeue_burst(uint8_t dev_id, uint16_t qp_id, struct rte_comp_op **ops, uint16_t nb_ops); /** * Enqueue a burst of operations for processing on a compression device. * * The rte_compressdev_enqueue_burst() function is invoked to place * comp operations on the queue *qp_id* of the device designated by * its *dev_id*. * * The *nb_ops* parameter is the number of operations to process which are * supplied in the *ops* array of *rte_comp_op* structures. * * The rte_compressdev_enqueue_burst() function returns the number of * operations it actually enqueued for processing. A return value equal to * *nb_ops* means that all packets have been enqueued. * * @note All compression operations are Out-of-place (OOP) operations, * as the size of the output data is different to the size of the input data. * * @note The flush flag only applies to operations which return SUCCESS. * In OUT_OF_SPACE cases whether STATEFUL or STATELESS, data in dest buffer * is as if flush flag was FLUSH_NONE. * @note flush flag only applies in compression direction. It has no meaning * for decompression. * @note: operation ordering is not maintained within the queue pair. * * @param dev_id * Compress device identifier * @param qp_id * The index of the queue pair on which operations * are to be enqueued for processing. The value * must be in the range [0, nb_queue_pairs - 1] * previously supplied to *rte_compressdev_configure* * @param ops * The address of an array of *nb_ops* pointers * to *rte_comp_op* structures which contain * the operations to be processed * @param nb_ops * The number of operations to process * @return * The number of operations actually enqueued on the device. The return * value can be less than the value of the *nb_ops* parameter when the * comp devices queue is full or if invalid parameters are specified in * a *rte_comp_op*. */ uint16_t __rte_experimental rte_compressdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id, struct rte_comp_op **ops, uint16_t nb_ops); /** * This should alloc a stream from the device's mempool and initialise it. * The application should call this API when setting up for the stateful * processing of a set of data on a device. The API can be called multiple * times to set up a stream for each data set. The handle returned is only for * use with ops of op_type STATEFUL and must be passed to the PMD * with every op in the data stream * * @param dev_id * Compress device identifier * @param xform * xform data * @param stream * Pointer to where PMD's private stream handle should be stored * * @return * - 0 if successful and valid stream handle * - <0 in error cases * - Returns -EINVAL if input parameters are invalid. * - Returns -ENOTSUP if comp device does not support STATEFUL operations. * - Returns -ENOTSUP if comp device does not support the comp transform. * - Returns -ENOMEM if the private stream could not be allocated. * */ int __rte_experimental rte_compressdev_stream_create(uint8_t dev_id, const struct rte_comp_xform *xform, void **stream); /** * This should clear the stream and return it to the device's mempool. * * @param dev_id * Compress device identifier * * @param stream * PMD's private stream data * * @return * - 0 if successful * - <0 in error cases * - Returns -EINVAL if input parameters are invalid. * - Returns -ENOTSUP if comp device does not support STATEFUL operations. * - Returns -EBUSY if can't free stream as there are inflight operations */ int __rte_experimental rte_compressdev_stream_free(uint8_t dev_id, void *stream); /** * This should alloc a private_xform from the device's mempool and initialise * it. The application should call this API when setting up for stateless * processing on a device. If it returns non-shareable, then the appl cannot * share this handle with multiple in-flight ops and should call this API again * to get a separate handle for every in-flight op. * The handle returned is only valid for use with ops of op_type STATELESS. * * @param dev_id * Compress device identifier * @param xform * xform data * @param private_xform * Pointer to where PMD's private_xform handle should be stored * * @return * - if successful returns 0 * and valid private_xform handle * - <0 in error cases * - Returns -EINVAL if input parameters are invalid. * - Returns -ENOTSUP if comp device does not support the comp transform. * - Returns -ENOMEM if the private_xform could not be allocated. */ int __rte_experimental rte_compressdev_private_xform_create(uint8_t dev_id, const struct rte_comp_xform *xform, void **private_xform); /** * This should clear the private_xform and return it to the device's mempool. * It is the application's responsibility to ensure that private_xform data * is not cleared while there are still in-flight operations using it. * * @param dev_id * Compress device identifier * * @param private_xform * PMD's private_xform data * * @return * - 0 if successful * - <0 in error cases * - Returns -EINVAL if input parameters are invalid. */ int __rte_experimental rte_compressdev_private_xform_free(uint8_t dev_id, void *private_xform); #ifdef __cplusplus } #endif #endif /* _RTE_COMPRESSDEV_H_ */