/*- * BSD LICENSE * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef TEST_ACL_H_ #define TEST_ACL_H_ struct ipv4_7tuple { uint16_t vlan; uint16_t domain; uint8_t proto; uint32_t ip_src; uint32_t ip_dst; uint16_t port_src; uint16_t port_dst; uint32_t allow; uint32_t deny; }; /** * Legacy support for 7-tuple IPv4 and VLAN rule. * This structure and corresponding API is deprecated. */ struct rte_acl_ipv4vlan_rule { struct rte_acl_rule_data data; /**< Miscellaneous data for the rule. */ uint8_t proto; /**< IPv4 protocol ID. */ uint8_t proto_mask; /**< IPv4 protocol ID mask. */ uint16_t vlan; /**< VLAN ID. */ uint16_t vlan_mask; /**< VLAN ID mask. */ uint16_t domain; /**< VLAN domain. */ uint16_t domain_mask; /**< VLAN domain mask. */ uint32_t src_addr; /**< IPv4 source address. */ uint32_t src_mask_len; /**< IPv4 source address mask. */ uint32_t dst_addr; /**< IPv4 destination address. */ uint32_t dst_mask_len; /**< IPv4 destination address mask. */ uint16_t src_port_low; /**< L4 source port low. */ uint16_t src_port_high; /**< L4 source port high. */ uint16_t dst_port_low; /**< L4 destination port low. */ uint16_t dst_port_high; /**< L4 destination port high. */ }; /** * Specifies fields layout inside rte_acl_rule for rte_acl_ipv4vlan_rule. */ enum { RTE_ACL_IPV4VLAN_PROTO_FIELD, RTE_ACL_IPV4VLAN_VLAN1_FIELD, RTE_ACL_IPV4VLAN_VLAN2_FIELD, RTE_ACL_IPV4VLAN_SRC_FIELD, RTE_ACL_IPV4VLAN_DST_FIELD, RTE_ACL_IPV4VLAN_SRCP_FIELD, RTE_ACL_IPV4VLAN_DSTP_FIELD, RTE_ACL_IPV4VLAN_NUM_FIELDS }; /** * Macro to define rule size for rte_acl_ipv4vlan_rule. */ #define RTE_ACL_IPV4VLAN_RULE_SZ \ RTE_ACL_RULE_SZ(RTE_ACL_IPV4VLAN_NUM_FIELDS) /* * That effectively defines order of IPV4VLAN classifications: * - PROTO * - VLAN (TAG and DOMAIN) * - SRC IP ADDRESS * - DST IP ADDRESS * - PORTS (SRC and DST) */ enum { RTE_ACL_IPV4VLAN_PROTO, RTE_ACL_IPV4VLAN_VLAN, RTE_ACL_IPV4VLAN_SRC, RTE_ACL_IPV4VLAN_DST, RTE_ACL_IPV4VLAN_PORTS, RTE_ACL_IPV4VLAN_NUM }; /* rules for invalid layout test */ struct rte_acl_ipv4vlan_rule invalid_layout_rules[] = { /* test src and dst address */ { .data = {.userdata = 1, .category_mask = 1, .priority = 1}, .src_addr = IPv4(10,0,0,0), .src_mask_len = 24, }, { .data = {.userdata = 2, .category_mask = 1, .priority = 1}, .dst_addr = IPv4(10,0,0,0), .dst_mask_len = 24, }, /* test src and dst ports */ { .data = {.userdata = 3, .category_mask = 1, .priority = 1}, .dst_port_low = 100, .dst_port_high = 100, }, { .data = {.userdata = 4, .category_mask = 1, .priority = 1}, .src_port_low = 100, .src_port_high = 100, }, /* test proto */ { .data = {.userdata = 5, .category_mask = 1, .priority = 1}, .proto = 0xf, .proto_mask = 0xf }, { .data = {.userdata = 6, .category_mask = 1, .priority = 1}, .dst_port_low = 0xf, .dst_port_high = 0xf, } }; /* these might look odd because they don't match up the rules. This is * intentional, as the invalid layout test presumes returning the correct * results using the wrong data layout. */ struct ipv4_7tuple invalid_layout_data[] = { {.ip_src = IPv4(10,0,1,0)}, /* should not match */ {.ip_src = IPv4(10,0,0,1), .allow = 2}, /* should match 2 */ {.port_src = 100, .allow = 4}, /* should match 4 */ {.port_dst = 0xf, .allow = 6}, /* should match 6 */ }; #define ACL_ALLOW 0 #define ACL_DENY 1 #define ACL_ALLOW_MASK 0x1 #define ACL_DENY_MASK 0x2 /* ruleset for ACL unit test */ struct rte_acl_ipv4vlan_rule acl_test_rules[] = { /* destination IP addresses */ /* matches all packets traveling to 192.168.0.0/16 */ { .data = {.userdata = 1, .category_mask = ACL_ALLOW_MASK, .priority = 230}, .dst_addr = IPv4(192,168,0,0), .dst_mask_len = 16, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets traveling to 192.168.1.0/24 */ { .data = {.userdata = 2, .category_mask = ACL_ALLOW_MASK, .priority = 330}, .dst_addr = IPv4(192,168,1,0), .dst_mask_len = 24, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets traveling to 192.168.1.50 */ { .data = {.userdata = 3, .category_mask = ACL_DENY_MASK, .priority = 230}, .dst_addr = IPv4(192,168,1,50), .dst_mask_len = 32, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* source IP addresses */ /* matches all packets traveling from 10.0.0.0/8 */ { .data = {.userdata = 4, .category_mask = ACL_ALLOW_MASK, .priority = 240}, .src_addr = IPv4(10,0,0,0), .src_mask_len = 8, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets traveling from 10.1.1.0/24 */ { .data = {.userdata = 5, .category_mask = ACL_ALLOW_MASK, .priority = 340}, .src_addr = IPv4(10,1,1,0), .src_mask_len = 24, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets traveling from 10.1.1.1 */ { .data = {.userdata = 6, .category_mask = ACL_DENY_MASK, .priority = 240}, .src_addr = IPv4(10,1,1,1), .src_mask_len = 32, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* VLAN tag */ /* matches all packets with lower 7 bytes of VLAN tag equal to 0x64 */ { .data = {.userdata = 7, .category_mask = ACL_ALLOW_MASK, .priority = 260}, .vlan = 0x64, .vlan_mask = 0x7f, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets with VLAN tags that have 0x5 in them */ { .data = {.userdata = 8, .category_mask = ACL_ALLOW_MASK, .priority = 260}, .vlan = 0x5, .vlan_mask = 0x5, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets with VLAN tag 5 */ { .data = {.userdata = 9, .category_mask = ACL_DENY_MASK, .priority = 360}, .vlan = 0x5, .vlan_mask = 0xffff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* VLAN domain */ /* matches all packets with lower 7 bytes of domain equal to 0x64 */ { .data = {.userdata = 10, .category_mask = ACL_ALLOW_MASK, .priority = 250}, .domain = 0x64, .domain_mask = 0x7f, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets with domains that have 0x5 in them */ { .data = {.userdata = 11, .category_mask = ACL_ALLOW_MASK, .priority = 350}, .domain = 0x5, .domain_mask = 0x5, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets with domain 5 */ { .data = {.userdata = 12, .category_mask = ACL_DENY_MASK, .priority = 350}, .domain = 0x5, .domain_mask = 0xffff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* destination port */ /* matches everything with dst port 80 */ { .data = {.userdata = 13, .category_mask = ACL_ALLOW_MASK, .priority = 310}, .dst_port_low = 80, .dst_port_high = 80, .src_port_low = 0, .src_port_high = 0xffff, }, /* matches everything with dst port 22-1023 */ { .data = {.userdata = 14, .category_mask = ACL_ALLOW_MASK, .priority = 210}, .dst_port_low = 22, .dst_port_high = 1023, .src_port_low = 0, .src_port_high = 0xffff, }, /* matches everything with dst port 1020 */ { .data = {.userdata = 15, .category_mask = ACL_DENY_MASK, .priority = 310}, .dst_port_low = 1020, .dst_port_high = 1020, .src_port_low = 0, .src_port_high = 0xffff, }, /* matches everything with dst portrange 1000-2000 */ { .data = {.userdata = 16, .category_mask = ACL_DENY_MASK, .priority = 210}, .dst_port_low = 1000, .dst_port_high = 2000, .src_port_low = 0, .src_port_high = 0xffff, }, /* source port */ /* matches everything with src port 80 */ { .data = {.userdata = 17, .category_mask = ACL_ALLOW_MASK, .priority = 320}, .src_port_low = 80, .src_port_high = 80, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches everything with src port 22-1023 */ { .data = {.userdata = 18, .category_mask = ACL_ALLOW_MASK, .priority = 220}, .src_port_low = 22, .src_port_high = 1023, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches everything with src port 1020 */ { .data = {.userdata = 19, .category_mask = ACL_DENY_MASK, .priority = 320}, .src_port_low = 1020, .src_port_high = 1020, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches everything with src portrange 1000-2000 */ { .data = {.userdata = 20, .category_mask = ACL_DENY_MASK, .priority = 220}, .src_port_low = 1000, .src_port_high = 2000, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* protocol number */ /* matches all packets with protocol number either 0x64 or 0xE4 */ { .data = {.userdata = 21, .category_mask = ACL_ALLOW_MASK, .priority = 270}, .proto = 0x64, .proto_mask = 0x7f, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets with protocol that have 0x5 in them */ { .data = {.userdata = 22, .category_mask = ACL_ALLOW_MASK, .priority = 1}, .proto = 0x5, .proto_mask = 0x5, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* matches all packets with protocol 5 */ { .data = {.userdata = 23, .category_mask = ACL_DENY_MASK, .priority = 370}, .proto = 0x5, .proto_mask = 0xff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 0, .dst_port_high = 0xffff, }, /* rules combining various fields */ { .data = {.userdata = 24, .category_mask = ACL_ALLOW_MASK, .priority = 400}, /** make sure that unmasked bytes don't fail! */ .dst_addr = IPv4(1,2,3,4), .dst_mask_len = 16, .src_addr = IPv4(5,6,7,8), .src_mask_len = 24, .proto = 0x5, .proto_mask = 0xff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 22, .dst_port_high = 1024, .vlan = 0x8100, .vlan_mask = 0xffff, .domain = 0x64, .domain_mask = 0xffff, }, { .data = {.userdata = 25, .category_mask = ACL_DENY_MASK, .priority = 400}, .dst_addr = IPv4(5,6,7,8), .dst_mask_len = 24, .src_addr = IPv4(1,2,3,4), .src_mask_len = 16, .proto = 0x5, .proto_mask = 0xff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 22, .dst_port_high = 1024, .vlan = 0x8100, .vlan_mask = 0xffff, .domain = 0x64, .domain_mask = 0xffff, }, { .data = {.userdata = 26, .category_mask = ACL_ALLOW_MASK, .priority = 500}, .dst_addr = IPv4(1,2,3,4), .dst_mask_len = 8, .src_addr = IPv4(5,6,7,8), .src_mask_len = 32, .proto = 0x5, .proto_mask = 0xff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 22, .dst_port_high = 1024, .vlan = 0x64, .vlan_mask = 0xffff, }, { .data = {.userdata = 27, .category_mask = ACL_DENY_MASK, .priority = 500}, .dst_addr = IPv4(5,6,7,8), .dst_mask_len = 32, .src_addr = IPv4(1,2,3,4), .src_mask_len = 8, .proto = 0x5, .proto_mask = 0xff, .src_port_low = 0, .src_port_high = 0xffff, .dst_port_low = 22, .dst_port_high = 1024, .vlan = 0x64, .vlan_mask = 0xffff, }, }; /* data for ACL unit test */ struct ipv4_7tuple acl_test_data[] = { /* testing single rule aspects */ {.ip_src = IPv4(10,0,0,0), .allow = 4}, /* should match 4 */ {.ip_src = IPv4(10,1,1,2), .allow = 5}, /* should match 5 */ {.ip_src = IPv4(10,1,1,1), .allow = 5, .deny = 6}, /* should match 5, 6 */ {.ip_dst = IPv4(10,0,0,0)}, /* should not match */ {.ip_dst = IPv4(10,1,1,2)}, /* should not match */ {.ip_dst = IPv4(10,1,1,1)}, /* should not match */ {.ip_src = IPv4(192,168,2,50)}, /* should not match */ {.ip_src = IPv4(192,168,1,2)}, /* should not match */ {.ip_src = IPv4(192,168,1,50)}, /* should not match */ {.ip_dst = IPv4(192,168,2,50), .allow = 1}, /* should match 1 */ {.ip_dst = IPv4(192,168,1,49), .allow = 2}, /* should match 2 */ {.ip_dst = IPv4(192,168,1,50), .allow = 2, .deny = 3}, /* should match 2, 3 */ {.vlan = 0x64, .allow = 7}, /* should match 7 */ {.vlan = 0xfE4, .allow = 7}, /* should match 7 */ {.vlan = 0xE2}, /* should not match */ {.vlan = 0xD, .allow = 8}, /* should match 8 */ {.vlan = 0x6}, /* should not match */ {.vlan = 0x5, .allow = 8, .deny = 9}, /* should match 8, 9 */ {.domain = 0x64, .allow = 10}, /* should match 10 */ {.domain = 0xfE4, .allow = 10}, /* should match 10 */ {.domain = 0xE2}, /* should not match */ {.domain = 0xD, .allow = 11}, /* should match 11 */ {.domain = 0x6}, /* should not match */ {.domain = 0x5, .allow = 11, .deny = 12}, /* should match 11, 12 */ {.port_dst = 80, .allow = 13}, /* should match 13 */ {.port_dst = 79, .allow = 14}, /* should match 14 */ {.port_dst = 81, .allow = 14}, /* should match 14 */ {.port_dst = 21}, /* should not match */ {.port_dst = 1024, .deny = 16}, /* should match 16 */ {.port_dst = 1020, .allow = 14, .deny = 15}, /* should match 14, 15 */ {.port_src = 80, .allow = 17}, /* should match 17 */ {.port_src = 79, .allow = 18}, /* should match 18 */ {.port_src = 81, .allow = 18}, /* should match 18 */ {.port_src = 21}, /* should not match */ {.port_src = 1024, .deny = 20}, /* should match 20 */ {.port_src = 1020, .allow = 18, .deny = 19}, /* should match 18, 19 */ {.proto = 0x64, .allow = 21}, /* should match 21 */ {.proto = 0xE4, .allow = 21}, /* should match 21 */ {.proto = 0xE2}, /* should not match */ {.proto = 0xD, .allow = 22}, /* should match 22 */ {.proto = 0x6}, /* should not match */ {.proto = 0x5, .allow = 22, .deny = 23}, /* should match 22, 23 */ /* testing matching multiple rules at once */ {.vlan = 0x5, .ip_src = IPv4(10,1,1,1), .allow = 5, .deny = 9}, /* should match 5, 9 */ {.vlan = 0x5, .ip_src = IPv4(192,168,2,50), .allow = 8, .deny = 9}, /* should match 8, 9 */ {.vlan = 0x55, .ip_src = IPv4(192,168,1,49), .allow = 8}, /* should match 8 */ {.port_dst = 80, .port_src = 1024, .allow = 13, .deny = 20}, /* should match 13,20 */ {.port_dst = 79, .port_src = 1024, .allow = 14, .deny = 20}, /* should match 14,20 */ {.proto = 0x5, .ip_dst = IPv4(192,168,2,50), .allow = 1, .deny = 23}, /* should match 1, 23 */ {.proto = 0x5, .ip_dst = IPv4(192,168,1,50), .allow = 2, .deny = 23}, /* should match 2, 23 */ {.vlan = 0x64, .domain = 0x5, .allow = 11, .deny = 12}, /* should match 11, 12 */ {.proto = 0x5, .port_src = 80, .allow = 17, .deny = 23}, /* should match 17, 23 */ {.proto = 0x5, .port_dst = 80, .allow = 13, .deny = 23}, /* should match 13, 23 */ {.proto = 0x51, .port_src = 5000}, /* should not match */ {.ip_src = IPv4(192,168,1,50), .ip_dst = IPv4(10,0,0,0), .proto = 0x51, .port_src = 5000, .port_dst = 5000}, /* should not match */ /* test full packet rules */ { .ip_dst = IPv4(1,2,100,200), .ip_src = IPv4(5,6,7,254), .proto = 0x5, .vlan = 0x8100, .domain = 0x64, .port_src = 12345, .port_dst = 80, .allow = 24, .deny = 23 }, /* should match 23, 24 */ { .ip_dst = IPv4(5,6,7,254), .ip_src = IPv4(1,2,100,200), .proto = 0x5, .vlan = 0x8100, .domain = 0x64, .port_src = 12345, .port_dst = 80, .allow = 13, .deny = 25 }, /* should match 13, 25 */ { .ip_dst = IPv4(1,10,20,30), .ip_src = IPv4(5,6,7,8), .proto = 0x5, .vlan = 0x64, .port_src = 12345, .port_dst = 80, .allow = 26, .deny = 23 }, /* should match 23, 26 */ { .ip_dst = IPv4(5,6,7,8), .ip_src = IPv4(1,10,20,30), .proto = 0x5, .vlan = 0x64, .port_src = 12345, .port_dst = 80, .allow = 13, .deny = 27 }, /* should match 13, 27 */ { .ip_dst = IPv4(2,2,3,4), .ip_src = IPv4(4,6,7,8), .proto = 0x5, .vlan = 0x64, .port_src = 12345, .port_dst = 80, .allow = 13, .deny = 23 }, /* should match 13, 23 */ { .ip_dst = IPv4(1,2,3,4), .ip_src = IPv4(4,6,7,8), .proto = 0x5, .vlan = 0x64, .port_src = 12345, .port_dst = 80, .allow = 13, .deny = 23 }, /* should match 13, 23 */ /* visual separator! */ { .ip_dst = IPv4(1,2,100,200), .ip_src = IPv4(5,6,7,254), .proto = 0x55, .vlan = 0x8000, .domain = 0x6464, .port_src = 12345, .port_dst = 8080, .allow = 10 }, /* should match 10 */ { .ip_dst = IPv4(5,6,7,254), .ip_src = IPv4(1,2,100,200), .proto = 0x55, .vlan = 0x8100, .domain = 0x6464, .port_src = 12345, .port_dst = 180, .allow = 10 }, /* should match 10 */ { .ip_dst = IPv4(1,10,20,30), .ip_src = IPv4(5,6,7,8), .proto = 0x55, .vlan = 0x64, .port_src = 12345, .port_dst = 180, .allow = 7 }, /* should match 7 */ { .ip_dst = IPv4(5,6,7,8), .ip_src = IPv4(1,10,20,30), .proto = 0x55, .vlan = 0x64, .port_src = 12345, .port_dst = 180, .allow = 7 }, /* should match 7 */ { .ip_dst = IPv4(2,2,3,4), .ip_src = IPv4(4,6,7,8), .proto = 0x55, .vlan = 0x64, .port_src = 12345, .port_dst = 180, .allow = 7 }, /* should match 7 */ { .ip_dst = IPv4(1,2,3,4), .ip_src = IPv4(4,6,7,8), .proto = 0x50, .vlan = 0x6466, .port_src = 12345, .port_dst = 12345, }, /* should not match */ }; #endif /* TEST_ACL_H_ */