module ietf-nat {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-nat";
prefix "nat";
import ietf-inet-types {
prefix inet;
reference
"Section 4 of RFC 6991";
}
import ietf-yang-types {
prefix yang;
reference
"Section 3 of RFC 6991";
}
import ietf-interfaces {
prefix if;
reference
"RFC 8343: A YANG Data Model for Interface Management";
}
organization
"IETF OPSAWG (Operations and Management Area Working Group)";
contact
"WG Web:
WG List:
Editor: Mohamed Boucadair
Editor: Senthil Sivakumar
Editor: Christian Jacquenet
Editor: Suresh Vinapamula
Editor: Qin Wu
";
description
"This module is a YANG module for NAT implementations.
NAT44, Network Address and Protocol Translation from IPv6
Clients to IPv4 Servers (NAT64), Customer-side transLATor (CLAT),
Stateless IP/ICMP Translation (SIIT), Explicit Address Mappings
for Stateless IP/ICMP Translation (SIIT EAM), IPv6 Network
Prefix Translation (NPTv6), and Destination NAT are covered.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-06-28 {
description
"Initial revision.";
reference
"RFC XXXX: A YANG Module for Network Address Translation
(NAT) and Network Prefix Translation (NPT)";
}
/*
* Definitions
*/
typedef percent {
type uint8 {
range "0 .. 100";
}
description
"Percentage";
}
/*
* Features
*/
feature basic-nat44{
description
"Basic NAT44 translation is limited to IP addresses alone.";
reference
"RFC 3022: Traditional IP Network Address Translator
(Traditional NAT)";
}
feature napt44 {
description
"Network Address/Port Translator (NAPT): translation is
extended to include IP addresses and transport identifiers
(such as a TCP/UDP port or ICMP query ID).
If the internal IP address is not sufficient to uniquely
disambiguate NAPT44 mappings, an additional attribute is
required. For example, that additional attribute may
be an IPv6 address (a.k.a., DS-Lite) or
a Layer 2 identifier (a.k.a., Per-Interface NAT)";
reference
"RFC 3022: Traditional IP Network Address Translator
(Traditional NAT)";
}
feature dst-nat {
description
"Destination NAT is a translation that acts on the destination
IP address and/or destination port number. This flavor is
usually deployed in load balancers or at devices
in front of public servers.";
}
feature nat64 {
description
"NAT64 translation allows IPv6-only clients to contact IPv4
servers using unicast UDP, TCP, or ICMP. One or more
public IPv4 addresses assigned to a NAT64 translator are
shared among several IPv6-only clients.";
reference
"RFC 6146: Stateful NAT64: Network Address and Protocol
Translation from IPv6 Clients to IPv4 Servers";
}
feature siit {
description
"The Stateless IP/ICMP Translation Algorithm (SIIT), which
translates between IPv4 and IPv6 packet headers (including
ICMP headers).
In the stateless mode, an IP/ICMP translator converts IPv4
addresses to IPv6 and vice versa solely based on the
configuration of the stateless IP/ICMP translator and
information contained within the packet being translated.
The translator must support the stateless address mapping
algorithm defined in RFC6052, which is the default behavior.";
reference
"RFC 7915: IP/ICMP Translation Algorithm";
}
feature clat {
description
"CLAT is customer-side translator that algorithmically
translates 1:1 private IPv4 addresses to global IPv6 addresses,
and vice versa.
When a dedicated /64 prefix is not available for translation
from DHCPv6-PD, the CLAT may perform NAT44 for all IPv4 LAN
packets so that all the LAN-originated IPv4 packets appear
from a single IPv4 address and are then statelessly translated
to one interface IPv6 address that is claimed by the CLAT via
the Neighbor Discovery Protocol (NDP) and defended with
Duplicate Address Detection.";
reference
"RFC 6877: 464XLAT: Combination of Stateful and Stateless
Translation";
}
feature eam {
description
"Explicit Address Mapping (EAM) is a bidirectional coupling
between an IPv4 Prefix and an IPv6 Prefix.";
reference
"RFC 7757: Explicit Address Mappings for Stateless IP/ICMP
Translation";
}
feature nptv6 {
description
"NPTv6 is a stateless transport-agnostic IPv6-to-IPv6
prefix translation.";
reference
"RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
}
/*
* Identities
*/
identity nat-type {
description
"Base identity for nat type.";
}
identity basic-nat44 {
base nat:nat-type;
description
"Identity for Basic NAT support.";
reference
"RFC 3022: Traditional IP Network Address Translator
(Traditional NAT)";
}
identity napt44 {
base nat:nat-type;
description
"Identity for NAPT support.";
reference
"RFC 3022: Traditional IP Network Address Translator
(Traditional NAT)";
}
identity dst-nat {
base nat:nat-type;
description
"Identity for Destination NAT support.";
}
identity nat64 {
base nat:nat-type;
description
"Identity for NAT64 support.";
reference
"RFC 6146: Stateful NAT64: Network Address and Protocol
Translation from IPv6 Clients to IPv4 Servers";
}
identity siit {
base nat:nat-type;
description
"Identity for SIIT support.";
reference
"RFC 7915: IP/ICMP Translation Algorithm";
}
identity clat {
base nat:nat-type;
description
"Identity for CLAT support.";
reference
"RFC 6877: 464XLAT: Combination of Stateful and Stateless
Translation";
}
identity eam {
base nat:nat-type;
description
"Identity for EAM support.";
reference
"RFC 7757: Explicit Address Mappings for Stateless IP/ICMP
Translation";
}
identity nptv6 {
base nat:nat-type;
description
"Identity for NPTv6 support.";
reference
"RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
}
/*
* Grouping
*/
grouping port-number {
description
"Individual port or a range of ports.
When only start-port-number is present,
it represents a single port number.";
leaf start-port-number {
type inet:port-number;
description
"Beginning of the port range.";
reference
"Section 3.2.9 of RFC 8045.";
}
leaf end-port-number {
type inet:port-number;
must ". >= ../start-port-number"
{
error-message
"The end-port-number must be greater than or
equal to start-port-number.";
}
description
"End of the port range.";
reference
"Section 3.2.10 of RFC 8045.";
}
}
grouping port-set {
description
"Indicates a set of ports.
It may be a simple port range, or use the Port Set ID (PSID)
algorithm to represent a range of transport layer
ports which will be used by a NAPT.";
choice port-type {
default port-range;
description
"Port type: port-range or port-set-algo.";
case port-range {
uses port-number;
}
case port-set-algo {
leaf psid-offset {
type uint8 {
range 0..15;
}
description
"The number of offset bits (a.k.a., 'a' bits).
Specifies the numeric value for the excluded port
range/offset bits.
Allowed values are between 0 and 15 ";
reference
"Section 5.1 of RFC 7597";
}
leaf psid-len {
type uint8 {
range 0..15;
}
mandatory true;
description
"The length of PSID, representing the sharing
ratio for an IPv4 address.
(also known as 'k').
The address-sharing ratio would be 2^k.";
reference
"Section 5.1 of RFC 7597";
}
leaf psid {
type uint16;
mandatory true;
description
"Port Set Identifier (PSID) value, which
identifies a set of ports algorithmically.";
reference
"Section 5.1 of RFC 7597";
}
}
reference
"Section 7597: Mapping of Address and Port with
Encapsulation (MAP-E)";
}
}
grouping mapping-entry {
description
"NAT mapping entry.
If an attribute is not stored in the mapping/session table,
this means the corresponding fields of a packet that
matches this entry is not rewritten by the NAT or this
information is not required for NAT filtering purposes.";
leaf index {
type uint32;
description
"A unique identifier of a mapping entry. This identifier can be
automatically assigned by the NAT instance or be explicitly
configured.";
}
leaf type {
type enumeration {
enum "static" {
description
"The mapping entry is explicitly configured
(e.g., via command-line interface).";
}
enum "dynamic-implicit" {
description
"This mapping is created implicitly as a side effect
of processing a packet that requires a new mapping.";
}
enum "dynamic-explicit" {
description
"This mapping is created as a result of an explicit
request, e.g., a PCP message.";
}
}
description
"Indicates the type of a mapping entry. E.g.,
a mapping can be: static, implicit dynamic
or explicit dynamic.";
}
leaf transport-protocol {
type uint8;
description
"Upper-layer protocol associated with this mapping.
Values are taken from the IANA protocol registry.
For example, this field contains 6 (TCP) for a TCP
mapping or 17 (UDP) for a UDP mapping.
If this leaf is not instantiated, then the mapping
applies to any protocol.";
}
leaf internal-src-address {
type inet:ip-prefix;
description
"Corresponds to the source IPv4/IPv6 address/prefix
of the packet received on an internal
interface.";
}
container internal-src-port {
description
"Corresponds to the source port of the packet received
on an internal interface.
It is used also to indicate the internal source ICMP
identifier.
As a reminder, all the ICMP Query messages contain
an 'Identifier' field, which is referred to in this
document as the 'ICMP Identifier'.";
uses port-number;
}
leaf external-src-address {
type inet:ip-prefix;
description
"Source IP address/prefix of the packet sent on an
external interface of the NAT.";
}
container external-src-port {
description
"Source port of the packet sent on an external
interface of the NAT.
It is used also to indicate the external source ICMP
identifier.";
uses port-number;
}
leaf internal-dst-address {
type inet:ip-prefix;
description
"Corresponds to the destination IP address/prefix
of the packet received on an internal interface
of the NAT.
For example, some NAT implementations support
the translation of both source and destination
addresses and ports, sometimes referred to
as 'Twice NAT'.";
}
container internal-dst-port {
description
"Corresponds to the destination port of the
IP packet received on the internal interface.
It is used also to include the internal
destination ICMP identifier.";
uses port-number;
}
leaf external-dst-address {
type inet:ip-prefix;
description
"Corresponds to the destination IP address/prefix
of the packet sent on an external interface
of the NAT.";
}
container external-dst-port {
description
"Corresponds to the destination port number of
the packet sent on the external interface
of the NAT.
It is used also to include the external
destination ICMP identifier.";
uses port-number;
}
leaf lifetime {
type uint32;
units "seconds";
description
"When specified, it is used to track the connection that is
fully-formed (e.g., once the three-way handshake
TCP is completed) or the duration for maintaining
an explicit mapping alive. The mapping entry will be
removed by the NAT instance once this lifetime is expired.
When reported in a get operation, the lifetime indicates
the remaining validity lifetime.
Static mappings may not be associated with a
lifetime. If no lifetime is associated with a
static mapping, an explicit action is required to
remove that mapping.";
}
}
/*
* NAT Module
*/
container nat {
description
"NAT module";
container instances {
description
"NAT instances";
list instance {
key "id";
description
"A NAT instance. This identifier can be automatically assigned
or explicitly configured.";
leaf id {
type uint32;
must ". >= 1";
description
"NAT instance identifier.
The identifier must be greater than zero.";
reference
"RFC 7659: Definitions of Managed Objects for Network
Address Translators (NATs)";
}
leaf name {
type string;
description
"A name associated with the NAT instance.";
reference
"RFC 7659: Definitions of Managed Objects for Network
Address Translators (NATs)";
}
leaf enable {
type boolean;
description
"Status of the NAT instance.";
}
container capabilities {
config false;
description
"NAT capabilities";
leaf-list nat-flavor {
type identityref {
base nat-type;
}
description
"Supported translation type(s).";
}
leaf-list per-interface-binding {
type enumeration {
enum "unsupported" {
description
"No capability to associate a NAT binding with
an extra identifier.";
}
enum "layer-2" {
description
"The NAT instance is able to associate a mapping with
a layer-2 identifier.";
}
enum "dslite" {
description
"The NAT instance is able to associate a mapping with
an IPv6 address (a.k.a., DS-Lite).";
}
}
description
"Indicates the capability of a NAT to associate a particular
NAT session not only with the five tuples used for the
transport connection on both sides of the NAT but also with
the internal interface on which the user device is
connected to the NAT.";
reference
"Section 4 of RFC 6619";
}
list transport-protocols {
key protocol-id;
description
"List of supported protocols.";
leaf protocol-id {
type uint8;
mandatory true;
description
"Upper-layer protocol associated with this mapping.
Values are taken from the IANA protocol registry:
https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml
For example, this field contains 6 (TCP) for a TCP
mapping or 17 (UDP) for a UDP mapping.";
}
leaf protocol-name {
type string;
description
"The name of the Upper-layer protocol associated
with this mapping.
Values are taken from the IANA protocol registry:
https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml
For example, TCP, UDP, DCCP, and SCTP.";
}
}
leaf restricted-port-support {
type boolean;
description
"Indicates source port NAT restriction support.";
reference
"RFC 7596: Lightweight 4over6: An Extension to
the Dual-Stack Lite Architecture.";
}
leaf static-mapping-support {
type boolean;
description
"Indicates whether static mappings are supported.";
}
leaf port-randomization-support {
type boolean;
description
"Indicates whether port randomization is supported.";
reference
"Section 4.2.1 of RFC 4787.";
}
leaf port-range-allocation-support {
type boolean;
description
"Indicates whether port range allocation is supported.";
reference
"Section 1.1 of RFC 7753.";
}
leaf port-preservation-suport {
type boolean;
description
"Indicates whether port preservation is supported.";
reference
"Section 4.2.1 of RFC 4787.";
}
leaf port-parity-preservation-support {
type boolean;
description
"Indicates whether port parity preservation is
supported.";
reference
"Section 8 of RFC 7857.";
}
leaf address-roundrobin-support {
type boolean;
description
"Indicates whether address allocation round robin is
supported.";
}
leaf paired-address-pooling-support {
type boolean;
description
"Indicates whether paired-address-pooling is
supported";
reference
"REQ-2 of RFC 4787.";
}
leaf endpoint-independent-mapping-support {
type boolean;
description
"Indicates whether endpoint-independent-
mapping is supported.";
reference
"Section 4 of RFC 4787.";
}
leaf address-dependent-mapping-support {
type boolean;
description
"Indicates whether address-dependent-mapping is
supported.";
reference
"Section 4 of RFC 4787.";
}
leaf address-and-port-dependent-mapping-support {
type boolean;
description
"Indicates whether address-and-port-dependent-mapping is
supported.";
reference
"Section 4 of RFC 4787.";
}
leaf endpoint-independent-filtering-support {
type boolean;
description
"Indicates whether endpoint-independent-filtering is
supported.";
reference
"Section 5 of RFC 4787.";
}
leaf address-dependent-filtering {
type boolean;
description
"Indicates whether address-dependent-filtering is
supported.";
reference
"Section 5 of RFC 4787.";
}
leaf address-and-port-dependent-filtering {
type boolean;
description
"Indicates whether address-and-port-dependent is
supported.";
reference
"Section 5 of RFC 4787.";
}
leaf fragment-behavior {
type enumeration {
enum "unsupported" {
description
"No capability to translate incoming fragments.
All received fragments are dropped.";
}
enum "in-order" {
description
"The NAT instance is able to translate fragments only if
they are received in order. That is, in particular the
header is in the first packet. Fragments received
out of order are dropped. ";
}
enum "out-of-order" {
description
"The NAT instance is able to translate a fragment even
if it is received out of order.
This behavior is recommended.";
reference
"REQ-14 of RFC 4787";
}
}
description
"The fragment behavior is the NAT instance's capability to
translate fragments received on the external interface of
the NAT.";
}
}
leaf type {
type identityref {
base nat-type;
}
description
"Specify the translation type. Particularly useful when
multiple translation flavors are supported.
If one type is supported by a NAT, this parameter is by
default set to that type.";
}
leaf per-interface-binding {
type enumeration {
enum "disabled" {
description
"Disable the capability to associate an extra identifier
with NAT mappings.";
}
enum "layer-2" {
description
"The NAT instance is able to associate a mapping with
a layer-2 identifier.";
}
enum "dslite" {
description
"The NAT instance is able to associate a mapping with
an IPv6 address (a.k.a., DS-Lite).";
}
}
description
"A NAT that associates a particular NAT session not only with
the five tuples used for the transport connection on both
sides of the NAT but also with the internal interface on
which the user device is connected to the NAT.
If supported, this mode of operation should be configurable,
and it should be disabled by default in general-purpose NAT
devices.
If one single per-interface binding behavior is supported by
a NAT, this parameter is by default set to that behavior.";
reference
"Section 4 of RFC 6619";
}
list nat-pass-through {
if-feature "basic-nat44 or napt44 or dst-nat";
key id;
description
"IP prefix NAT pass through.";
leaf id {
type uint32;
description
"An identifier of the IP prefix pass through.";
}
leaf prefix {
type inet:ip-prefix;
mandatory true;
description
"The IP addresses that match should not be translated.
It must be possible to administratively turn
off translation for specific destination addresses
and/or ports.";
reference
"REQ#6 of RFC 6888.";
}
leaf port {
type inet:port-number;
description
"It must be possible to administratively turn off
translation for specific destination addresses
and/or ports.
If no prefix is defined, the NAT pass through bound
to a given port applies for any destination address.";
reference
"REQ#6 of RFC 6888.";
}
}
list policy {
key id;
description
"NAT parameters for a given instance";
leaf id {
type uint32;
description
"An identifier of the NAT policy. It must be unique
within the NAT instance.";
}
container clat-parameters {
if-feature clat;
description
"CLAT parameters.";
list clat-ipv6-prefixes {
key ipv6-prefix;
description
"464XLAT double translation treatment is stateless when a
dedicated /64 is available for translation on the CLAT.
Otherwise, the CLAT will have both stateful and stateless
since it requires NAT44 from the LAN to a single IPv4
address and then stateless translation to a single
IPv6 address.";
reference
"RFC 6877: 464XLAT: Combination of Stateful and Stateless
Translation";
leaf ipv6-prefix {
type inet:ipv6-prefix;
description
"An IPv6 prefix used for CLAT.";
}
}
list ipv4-prefixes {
key ipv4-prefix;
description
"Pool of IPv4 addresses used for CLAT.
192.0.0.0/29 is the IPv4 service continuity prefix.";
reference
"RFC 7335: IPv4 Service Continuity Prefix";
leaf ipv4-prefix {
type inet:ipv4-prefix;
description
"464XLAT double translation treatment is
stateless when a dedicated /64 is available
for translation on the CLAT. Otherwise, the
CLAT will have both stateful and stateless
since it requires NAT44 from the LAN to
a single IPv4 address and then stateless
translation to a single IPv6 address.
The CLAT performs NAT44 for all IPv4 LAN
packets so that all the LAN-originated IPv4
packets appear from a single IPv4 address
and are then statelessly translated to one
interface IPv6 address that is claimed by
the CLAT.
An IPv4 address from this pool is also
provided to an application that makes
use of literals.";
reference
"RFC 6877: 464XLAT: Combination of Stateful and Stateless
Translation";
}
}
}
list nptv6-prefixes {
if-feature nptv6;
key internal-ipv6-prefix ;
description
"Provides one or a list of (internal IPv6 prefix,
external IPv6 prefix) required for NPTv6.
In its simplest form, NPTv6 interconnects two network
links, one of which is an 'internal' network link
attached to a leaf network within a single
administrative domain and the other of which is an
'external' network with connectivity to the global
Internet.";
reference
"RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
leaf internal-ipv6-prefix {
type inet:ipv6-prefix;
mandatory true;
description
"An IPv6 prefix used by an internal interface of NPTv6.";
reference
"RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
}
leaf external-ipv6-prefix {
type inet:ipv6-prefix;
mandatory true;
description
"An IPv6 prefix used by the external interface of NPTv6.";
reference
"RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
}
}
list eam {
if-feature eam;
key ipv4-prefix;
description
"The Explicit Address Mapping Table, a conceptual
table in which each row represents an EAM.
Each EAM describes a mapping between IPv4 and IPv6
prefixes/addresses.";
reference
"Section 3.1 of RFC 7757.";
leaf ipv4-prefix {
type inet:ipv4-prefix;
mandatory true;
description
"The IPv4 prefix of an EAM.";
reference
"Section 3.2 of RFC 7757.";
}
leaf ipv6-prefix {
type inet:ipv6-prefix;
mandatory true;
description
"The IPv6 prefix of an EAM.";
reference
"Section 3.2 of RFC 7757.";
}
}
list nat64-prefixes {
if-feature "siit or nat64 or clat";
key nat64-prefix;
description
"Provides one or a list of NAT64 prefixes
with or without a list of destination IPv4 prefixes.
It allows mapping IPv4 address ranges to IPv6 prefixes.
For example:
192.0.2.0/24 is mapped to 2001:db8:122:300::/56.
198.51.100.0/24 is mapped to 2001:db8:122::/48.";
reference
"Section 5.1 of RFC 7050.";
leaf nat64-prefix {
type inet:ipv6-prefix;
mandatory true;
description
"A NAT64 prefix. Can be Network-Specific Prefix (NSP) or
Well-Known Prefix (WKP).
Organizations deploying stateless IPv4/IPv6 translation
should assign a Network-Specific Prefix to their
IPv4/IPv6 translation service.
For stateless NAT64, IPv4-translatable IPv6 addresses
must use the selected Network-Specific Prefix.
Both IPv4-translatable IPv6 addresses and IPv4-converted
IPv6 addresses should use the same prefix.";
reference
"Sections 3.3 and 3.4 of RFC 6052.";
}
list destination-ipv4-prefix {
key ipv4-prefix;
description
"An IPv4 prefix/address.";
leaf ipv4-prefix {
type inet:ipv4-prefix;
description
"An IPv4 address/prefix.";
}
}
leaf stateless-enable {
type boolean;
default false;
description
"Enable explicitly stateless NAT64.";
}
}
list external-ip-address-pool {
if-feature "basic-nat44 or napt44 or nat64";
key pool-id;
description
"Pool of external IP addresses used to service internal
hosts.
A pool is a set of IP prefixes.";
leaf pool-id {
type uint32;
must ". >= 1";
description
"An identifier that uniquely identifies the address pool
within a NAT instance.
The identifier must be greater than zero.";
reference
"RFC 7659: Definitions of Managed Objects for
Network Address Translators (NATs)";
}
leaf external-ip-pool {
type inet:ipv4-prefix;
mandatory true;
description
"An IPv4 prefix used for NAT purposes.";
}
}
container port-set-restrict {
if-feature "napt44 or nat64";
description
"Configures contiguous and non-contiguous port ranges.
The port set is used to restrict the external source
port numbers used by the translator.";
uses port-set;
}
leaf dst-nat-enable {
if-feature "basic-nat44 or napt44";
type boolean;
default false;
description
"Enable/Disable destination NAT.
A NAT44 may be configured to enable Destination
NAT, too.";
}
list dst-ip-address-pool {
if-feature dst-nat;
key pool-id;
description
"Pool of IP addresses used for destination NAT.";
leaf pool-id {
type uint32;
description
"An identifier of the address pool.";
}
leaf dst-in-ip-pool {
type inet:ip-prefix;
description
"Is used to identify an internal destination
IP prefix/address to be translated.";
}
leaf dst-out-ip-pool {
type inet:ip-prefix;
mandatory true;
description
"IP address/prefix used for destination NAT.";
}
}
list transport-protocols {
if-feature "napt44 or nat64 or dst-nat";
key protocol-id;
description
"Configure the transport protocols to be handled by
the translator.
TCP and UDP are supported by default.";
leaf protocol-id {
type uint8;
mandatory true;
description
"Upper-layer protocol associated with this mapping.
Values are taken from the IANA protocol registry:
https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml
For example, this field contains 6 (TCP) for a TCP
mapping or 17 (UDP) for a UDP mapping.";
}
leaf protocol-name {
type string;
description
"The name of the Upper-layer protocol associated
with this mapping.
Values are taken from the IANA protocol registry:
https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml
For example, TCP, UDP, DCCP, and SCTP.";
}
}
leaf subscriber-mask-v6 {
type uint8 {
range "0 .. 128";
}
description
"The subscriber mask is an integer that indicates
the length of significant bits to be applied on
the source IPv6 address (internal side) to
unambiguously identify a user device (e.g., CPE).
Subscriber mask is a system-wide configuration
parameter that is used to enforce generic
per-subscriber policies (e.g., port-quota).
The enforcement of these generic policies does not
require the configuration of every subscriber's
prefix.
Example: suppose the 2001:db8:100:100::/56 prefix
is assigned to a NAT64 serviced CPE. Suppose also
that 2001:db8:100:100::1 is the IPv6 address used
by the client that resides in that CPE. When the
NAT64 receives a packet from this client,
it applies the subscriber-mask-v6 (e.g., 56) on
the source IPv6 address to compute the associated
prefix for this client (2001:db8:100:100::/56).
Then, the NAT64 enforces policies based on that
prefix (2001:db8:100:100::/56), not on the exact
source IPv6 address.";
}
list subscriber-match {
if-feature "basic-nat44 or napt44 or dst-nat";
key match-id;
description
"IP prefix match.
A subscriber is identified by a subnet.";
leaf match-id {
type uint32;
description
"An identifier of the subscriber match.";
}
leaf subnet {
type inet:ip-prefix;
mandatory true;
description
"The IP address subnets that match
should be translated. E.g., all addresses
that belong to the 192.0.2.0/24 prefix must
be processed by the NAT.";
}
}
leaf address-allocation-type {
type enumeration {
enum "arbitrary" {
if-feature "basic-nat44 or napt44 or nat64";
description
"Arbitrary pooling behavior means that the NAT
instance may create the new port mapping using any
address in the pool that has a free port for the
protocol concerned.";
}
enum "roundrobin" {
if-feature "basic-nat44 or napt44 or nat64";
description
"Round robin allocation.";
}
enum "paired" {
if-feature "napt44 or nat64";
description
"Paired address pooling informs the NAT
that all the flows from an internal IP
address must be assigned the same external
address. This is the recommended behavior for
NAPT/NAT64.";
reference
"RFC 4787: Network Address Translation (NAT)
Behavioral Requirements for Unicast UDP";
}
}
description
"Specifies how external IP addresses are allocated.";
}
leaf port-allocation-type {
if-feature "napt44 or nat64";
type enumeration {
enum "random" {
description
"Port randomization is enabled. A NAT port allocation
scheme should make it hard for attackers to guess
port numbers";
reference
"REQ-15 of RFC 6888";
}
enum "port-preservation" {
description
"Indicates whether the NAT should preserve the internal
port number.";
}
enum "port-parity-preservation" {
description
"Indicates whether the NAT should preserve the port
parity of the internal port number.";
}
enum "port-range-allocation" {
description
"Indicates whether the NAT assigns a range of ports
for an internal host. This scheme allows to minimize
log volume.";
reference
"REQ-14 of RFC 6888";
}
}
description
"Indicates the type of port allocation.";
}
leaf mapping-type {
if-feature "napt44 or nat64";
type enumeration {
enum "eim" {
description
"endpoint-independent-mapping.";
reference
"Section 4 of RFC 4787.";
}
enum "adm" {
description
"address-dependent-mapping.";
reference
"Section 4 of RFC 4787.";
}
enum "edm" {
description
"address-and-port-dependent-mapping.";
reference
"Section 4 of RFC 4787.";
}
}
description
"Indicates the type of a NAT mapping.";
}
leaf filtering-type {
if-feature "napt44 or nat64";
type enumeration {
enum "eif" {
description
"endpoint-independent-filtering.";
reference
"Section 5 of RFC 4787.";
}
enum "adf" {
description
"address-dependent-filtering.";
reference
"Section 5 of RFC 4787.";
}
enum "edf" {
description
"address-and-port-dependent-filtering";
reference
"Section 5 of RFC 4787.";
}
}
description
"Indicates the type of a NAT filtering.";
}
leaf fragment-behavior {
if-feature "napt44 or nat64";
type enumeration {
enum "drop-all" {
description
"All received fragments are dropped.";
}
enum "in-order" {
description
"Translate fragments only if they are received
in order.";
}
enum "out-of-order" {
description
"Translate a fragment even if it is received out
of order.
This behavior is recommended.";
reference
"REQ-14 of RFC 4787";
}
}
description
"The fragment behavior instructs the NAT about the
behavior to follow to translate fragments received
on the external interface of the NAT.";
}
list port-quota {
if-feature "napt44 or nat64";
key quota-type;
description
"Configures a port quota to be assigned per subscriber.
It corresponds to the maximum number of ports to be
used by a subscriber.";
leaf port-limit {
type uint16;
description
"Configures a port quota to be assigned per subscriber.
It corresponds to the maximum number of ports to be
used by a subscriber.";
reference
"REQ-4 of RFC 6888.";
}
leaf quota-type {
type uint8;
description
"Indicates whether the port quota applies to
all protocols (0) or to a specific protocol.";
}
}
container port-set {
when "../port-allocation-type = 'port-range-allocation'";
if-feature "napt44 or nat64";
description
"Manages port-set assignments.";
leaf port-set-size {
type uint16;
// TODO(HC2VPP-328)
// mandatory true;
description
"Indicates the size of assigned port sets.";
}
leaf port-set-timeout {
type uint32;
units "seconds";
description
"inactivity timeout for port sets.";
}
}
container timers {
if-feature "napt44 or nat64";
description
"Configure values of various timeouts.";
leaf udp-timeout {
type uint32;
units "seconds";
default 300;
description
"UDP inactivity timeout. That is the time a mapping
will stay active without packets traversing the NAT.";
reference
"RFC 4787: Network Address Translation (NAT)
Behavioral Requirements for Unicast UDP";
}
leaf tcp-idle-timeout {
type uint32;
units "seconds";
default 7440;
description
"TCP Idle timeout should be 2 hours and 4 minutes.";
reference
"RFC 5382: NAT Behavioral Requirements for TCP";
}
leaf tcp-trans-open-timeout {
type uint32;
units "seconds";
default 240;
description
"The value of the transitory open connection
idle-timeout.
A NAT should provide different configurable
parameters for configuring the open and
closing idle timeouts.
To accommodate deployments that consider
a partially open timeout of 4 minutes as being
excessive from a security standpoint, a NAT may
allow the configured timeout to be less than
4 minutes.
However, a minimum default transitory connection
idle-timeout of 4 minutes is recommended.";
reference
"Section 2.1 of RFC 7857.";
}
leaf tcp-trans-close-timeout {
type uint32;
units "seconds";
default 240;
description
"The value of the transitory close connection
idle-timeout.
A NAT should provide different configurable
parameters for configuring the open and
closing idle timeouts.";
reference
"Section 2.1 of RFC 7857.";
}
leaf tcp-in-syn-timeout {
type uint32;
units "seconds";
default 6;
description
"A NAT must not respond to an unsolicited
inbound SYN packet for at least 6 seconds
after the packet is received. If during
this interval the NAT receives and translates
an outbound SYN for the connection the NAT
must silently drop the original unsolicited
inbound SYN packet.";
reference
"RFC 5382 NAT Behavioral Requirements for TCP";
}
leaf fragment-min-timeout {
when "../../fragment-behavior='out-of-order'";
type uint32;
units "seconds";
default 2;
description
"As long as the NAT has available resources,
the NAT allows the fragments to arrive
over fragment-min-timeout interval.
The default value is inspired from RFC6146.";
}
leaf icmp-timeout {
type uint32;
units "seconds";
default 60;
description
"An ICMP Query session timer must not expire
in less than 60 seconds. It is recommended
that the ICMP Query session timer be made
configurable";
reference
"RFC 5508: NAT Behavioral Requirements for ICMP";
}
list per-port-timeout {
key port-number;
description
"Some NATs are configurable with short timeouts
for some ports, e.g., as 10 seconds on
port 53 (DNS) and 123 (NTP) and longer timeouts
on other ports.";
leaf port-number {
type inet:port-number;
description
"A port number.";
}
leaf timeout {
type uint32;
units "seconds";
mandatory true;
description
"Timeout for this port number";
}
}
leaf hold-down-timeout {
type uint32;
units "seconds";
default 120;
description
"Hold down timer.
Ports in the hold down pool are not reassigned until
hold-down-timeout expires.
The length of time and the maximum number of ports in
this state must be configurable by the administrator.
This is necessary in order to prevent collisions
between old and new mappings and sessions. It ensures
that all established sessions are broken instead of
redirected to a different peer.";
reference
"REQ#8 of RFC 6888.";
}
leaf hold-down-max {
type uint32;
description
"Maximum ports in the Hold down timer pool.
Ports in the hold down pool are not reassigned
until hold-down-timeout expires.
The length of time and the maximum
number of ports in this state must be
configurable by the administrator.
This is necessary in order
to prevent collisions between old
and new mappings and sessions. It ensures
that all established sessions are broken
instead of redirected to a different peer.";
reference
"REQ#8 of RFC 6888.";
}
}
leaf fragments-limit{
when "../fragment-behavior='out-of-order'";
type uint32;
description
"Limits the number of out of order fragments that can
be handled.";
reference
"Section 11 of RFC 4787.";
}
list algs {
key name;
description
"ALG-related features.";
leaf name {
type string;
description
"The name of the ALG.";
}
leaf transport-protocol {
type uint32;
description
"The transport protocol used by the ALG
(e.g., TCP, UDP).";
}
container dst-transport-port {
uses port-number;
description
"The destination port number(s) used by the ALG.
For example,
- 21 for the FTP ALG
- 53 for the DNS ALG.";
}
container src-transport-port {
uses port-number;
description
"The source port number(s) used by the ALG.";
}
leaf status {
type boolean;
description
"Enable/disable the ALG.";
}
}
leaf all-algs-enable {
type boolean;
description
"Enable/disable all ALGs.
When specified, this parameter overrides the one
that may be indicated, eventually, by the 'status'
of an individual ALG.";
}
container notify-pool-usage {
if-feature "basic-nat44 or napt44 or nat64";
description
"Notification of pool usage when certain criteria
are met.";
leaf pool-id {
type uint32;
description
"Pool-ID for which the notification criteria
is defined";
}
leaf high-threshold {
type percent;
description
"Notification must be generated when the defined high
threshold is reached.
For example, if a notification is required when the
pool utilization reaches 90%, this configuration
parameter must be set to 90.
0% indicates that no high threshold is enabled.";
}
leaf low-threshold {
type percent;
must ". >= ../high-threshold" {
error-message
"The upper port number must be greater than or
equal to lower port number.";
}
description
"Notification must be generated when the defined low
threshold is reached.
For example, if a notification is required when the
pool utilization reaches below 10%, this
configuration parameter must be set to 10";
}
leaf notify-interval {
type uint32 {
range "1 .. 3600";
}
units "seconds";
default '20';
description
"Minimum number of seconds between successive
notifications for this pool.";
reference
"RFC 7659: Definitions of Managed Objects for
Network Address Translators (NATs)";
}
}
container external-realm {
description
"Identifies the external realm of the NAT instance.";
choice realm-type {
description
"Can be an interface, VRF instance, etc.";
case interface {
description
"External interface.";
leaf external-interface {
type if:interface-ref;
description
"Name of the external interface.";
}
}
}
}
}
container mapping-limits {
if-feature "napt44 or nat64";
description
"Information about the configuration parameters that
limits the mappings based upon various criteria.";
leaf limit-subscribers {
type uint32;
description
"Maximum number of subscribers that can be serviced
by a NAT instance.
A subscriber is identified by a given prefix.";
reference
"RFC 7659: Definitions of Managed Objects for
Network Address Translators (NATs)";
}
leaf limit-address-mappings {
type uint32;
description
"Maximum number of address mappings that can be
handled by a NAT instance.
When this limit is reached, packets that would
normally trigger translation, will be dropped.";
reference
"RFC 7659: Definitions of Managed Objects
for Network Address Translators
(NATs)";
}
leaf limit-port-mappings {
type uint32;
description
"Maximum number of port mappings that can be handled
by a NAT instance.
When this limit is reached, packets that would
normally trigger translation, will be dropped.";
reference
"RFC 7659: Definitions of Managed Objects for
Network Address Translators (NATs)";
}
list limit-per-protocol {
if-feature "napt44 or nat64 or dst-nat";
key protocol-id;
description
"Configure limits per transport protocol";
leaf protocol-id {
type uint8;
mandatory true;
description
"Upper-layer protocol associated with this mapping.
Values are taken from the IANA protocol registry:
https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml
For example, this field contains 6 (TCP) for a TCP
mapping or 17 (UDP) for a UDP mapping.";
}
leaf limit {
type uint32;
description
"Maximum number of protocol-specific NAT mappings
per instance.";
}
}
}
container connection-limits {
if-feature "basic-nat44 or napt44 or nat64";
description
"Information about the configuration parameters that
rate limit the translation based upon various criteria.";
leaf limit-per-subscriber {
type uint32;
units "bits/second";
description
"Rate-limit the number of new mappings and sessions
per subscriber.";
}
leaf limit-per-instance {
type uint32;
units "bits/second";
description
"Rate-limit the number of new mappings and sessions
per instance.";
}
list limit-per-protocol {
if-feature "napt44 or nat64";
key protocol-id;
description
"Configure limits per transport protocol";
leaf protocol-id {
type uint8;
mandatory true;
description
"Upper-layer protocol associated with this mapping.
Values are taken from the IANA protocol registry:
https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml
For example, this field contains 6 (TCP) for a TCP
mapping or 17 (UDP) for a UDP mapping.";
}
leaf limit {
type uint32;
description
"Rate-limit the number of protocol-specific mappings
and sessions per instance.";
}
}
}
container notification-limits {
description "Sets notification limits.";
leaf notify-interval {
if-feature "basic-nat44 or napt44 or nat64";
type uint32 {
range "1 .. 3600";
}
units "seconds";
default '10';
description
"Minimum number of seconds between successive
notifications for this NAT instance.";
reference
"RFC 7659: Definitions of Managed Objects
for Network Address Translators (NATs)";
}
leaf notify-addresses-usage {
if-feature "basic-nat44 or napt44 or nat64";
type percent;
description
"Notification of address mappings usage over
the whole NAT instance.
Notification must be generated when the defined
threshold is reached.
For example, if a notification is required when
the address mappings utilization reaches 90%,
this configuration parameter must be set
to 90.";
}
leaf notify-ports-usage {
if-feature "napt44 or nat64";
type percent;
description
"Notification of port mappings usage over the
whole NAT instance.
Notification must be generated when the defined
threshold is reached.
For example, if a notification is required when
the port mappings utilization reaches 90%, this
configuration parameter must be set to 90.";
}
leaf notify-subscribers-limit {
if-feature "basic-nat44 or napt44 or nat64";
type uint32;
description
"Notification of active subscribers per NAT
instance.
Notification must be generated when the defined
threshold is reached.";
}
}
container mapping-table {
if-feature "basic-nat44 or napt44 " +
"or nat64 or clat or dst-nat";
description
"NAT mapping table. Applicable for functions which maintain
static and/or dynamic mappings, such as NAT44, Destination
NAT, NAT64, or CLAT.";
list mapping-entry {
key "index";
description "NAT mapping entry.";
uses mapping-entry;
}
}
container statistics {
config false;
description
"Statistics related to the NAT instance.";
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time on the most recent occasion at which the NAT
instance suffered a discontinuity. This must be
initialized when the NAT instance is configured
or rebooted.";
}
container traffic-statistics {
description
"Generic traffic statistics.";
leaf sent-packets {
type yang:zero-based-counter64;
description
"Number of packets sent.";
}
leaf sent-bytes {
type yang:zero-based-counter64;
units 'bytes';
description
"Counter for sent traffic in bytes.";
}
leaf rcvd-packets {
type yang:zero-based-counter64;
description
"Number of received packets.";
}
leaf rcvd-bytes {
type yang:zero-based-counter64;
units 'bytes';
description
"Counter for received traffic in bytes.";
}
leaf dropped-packets {
type yang:zero-based-counter64;
description
"Number of dropped packets.";
}
leaf dropped-bytes {
type yang:zero-based-counter64;
units 'bytes';
description
"Counter for dropped traffic in bytes.";
}
leaf dropped-fragments {
if-feature "napt44 or nat64";
type yang:zero-based-counter64;
description
"Number of dropped fragments on the external realm.";
}
leaf dropped-address-limit-packets {
if-feature "basic-nat44 or napt44 or nat64";
type yang:zero-based-counter64;
description
"Number of dropped packets because an address limit
is reached.";
}
leaf dropped-address-limit-bytes {
if-feature "basic-nat44 or napt44 or nat64";
type yang:zero-based-counter64;
units 'bytes';
description
"Counter of dropped packets because an address limit
is reached, in bytes.";
}
leaf dropped-address-packets {
if-feature "basic-nat44 or napt44 or nat64";
type yang:zero-based-counter64;
description
"Number of dropped packets because no address is
available for allocation.";
}
leaf dropped-address-bytes {
if-feature "basic-nat44 or napt44 or nat64";
type yang:zero-based-counter64;
units 'bytes';
description
"Counter of dropped packets because no address is
available for allocation, in bytes.";
}
leaf dropped-port-limit-packets {
if-feature "napt44 or nat64";
type yang:zero-based-counter64;
description
"Number of dropped packets because a port limit
is reached.";
}
leaf dropped-port-limit-bytes {
if-feature "napt44 or nat64";
type yang:zero-based-counter64;
units 'bytes';
description
"Counter of dropped packets because a port limit
is reached, in bytes.";
}
leaf dropped-port-packets {
if-feature "napt44 or nat64";
type yang:zero-based-counter64;
description
"Number of dropped packets because no port is
available for allocation.";
}
leaf dropped-port-bytes {
if-feature "napt44 or nat64";
type yang:zero-based-counter64;
units 'bytes';
description
"Counter of dropped packets because no port is
available for allocation, in bytes.";
}
leaf dropped-subscriber-limit-packets {
if-feature "basic-nat44 or napt44 or nat64";
type yang:zero-based-counter64;
description
"Number of dropped packets because the subscriber
limit per instance is reached.";
}
leaf dropped-subscriber-limit-bytes {
if-feature "basic-nat44 or napt44 or nat64";
type yang:zero-based-counter64;
units 'bytes';
description
"Counter of dropped packets because the subscriber
limit per instance is reached, in bytes.";
}
}
container mappings-statistics {
description
"Mappings statistics.";
leaf total-active-subscribers {
if-feature "basic-nat44 or napt44 or nat64";
type yang:gauge32;
description
"Total number of active subscribers (that is,
subscribers for which the NAT maintains active
mappings.
A subscriber is identified by a subnet,
subscriber-mask, etc.";
}
leaf total-address-mappings {
if-feature "basic-nat44 or napt44 " +
"or nat64 or clat or dst-nat";
type yang:gauge32;
description
"Total number of address mappings present at a given
time. It includes both static and dynamic mappings.";
reference
"Section 3.3.8 of RFC 7659";
}
leaf total-port-mappings {
if-feature "napt44 or nat64";
type yang:gauge32;
description
"Total number of NAT port mappings present at
a given time. It includes both static and dynamic
mappings.";
reference
"Section 3.3.9 of RFC 7659";
}
list total-per-protocol {
if-feature "napt44 or nat64";
key protocol-id;
description
"Total mappings for each enabled/supported protocol.";
leaf protocol-id {
type uint8;
mandatory true;
description
"Upper-layer protocol associated with this mapping.
For example, this field contains 6 (TCP) for a TCP
mapping or 17 (UDP) for a UDP mapping.";
}
leaf total {
type yang:gauge32;
description
"Total number of a protocol-specific mappings present
at a given time. The protocol is identified by
protocol-id.";
}
}
}
container pools-stats {
if-feature "basic-nat44 or napt44 or nat64";
description
"Statistics related to address/prefix pools
usage";
leaf addresses-allocated {
type yang:gauge32;
description
"Number of all allocated addresses.";
}
leaf addresses-free {
type yang:gauge32;
description
"Number of unallocated addresses of all pools at
a given time. The sum of unallocated and allocated
addresses is the total number of addresses of
the pools.";
}
container ports-stats {
if-feature "napt44 or nat64";
description
"Statistics related to port numbers usage.";
leaf ports-allocated {
type yang:gauge32;
description
"Number of allocated ports from all pools.";
}
leaf ports-free {
type yang:gauge32;
description
"Number of unallocated addresses from all pools.";
}
}
list per-pool-stats {
if-feature "basic-nat44 or napt44 or nat64";
key "pool-id";
description
"Statistics related to address/prefix pool usage";
leaf pool-id {
type uint32;
description
"Unique Identifier that represents a pool of
addresses/prefixes.";
}
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time on the most recent occasion at which this
pool counters suffered a discontinuity. This must
be initialized when the address pool is
configured.";
}
container pool-stats {
description
"Statistics related to address/prefix pool usage";
leaf addresses-allocated {
type yang:gauge32;
description
"Number of allocated addresses from this pool.";
}
leaf addresses-free {
type yang:gauge32;
description
"Number of unallocated addresses in this pool.";
}
}
container port-stats {
if-feature "napt44 or nat64";
description
"Statistics related to port numbers usage.";
leaf ports-allocated {
type yang:gauge32;
description
"Number of allocated ports from this pool.";
}
leaf ports-free {
type yang:gauge32;
description
"Number of unallocated addresses from this pool.";
}
}
}
}
}
}
}
}
/*
* Notifications
*/
notification nat-pool-event {
if-feature "basic-nat44 or napt44 or nat64";
description
"Notifications must be generated when the defined high/low
threshold is reached. Related configuration parameters
must be provided to trigger the notifications.";
leaf id {
type leafref {
path "/nat/instances/instance/id";
}
mandatory true;
description
"NAT instance Identifier.";
}
leaf policy-id {
type leafref {
path "/nat/instances/instance/policy/id";
}
description
"Policy Identifier.";
}
leaf pool-id {
type leafref {
path "/nat/instances/instance/policy/" +
"external-ip-address-pool/pool-id";
}
mandatory true;
description
"Pool Identifier.";
}
leaf notify-pool-threshold {
type percent;
mandatory true;
description
"A threshold (high-threshold or low-threshold) has
been fired.";
}
}
notification nat-instance-event {
if-feature "basic-nat44 or napt44 or nat64";
description
"Notifications must be generated when notify-addresses-usage
and/or notify-ports-usage threshold are reached.";
leaf id {
type leafref {
path "/nat/instances/instance/id";
}
mandatory true;
description
"NAT instance Identifier.";
}
leaf notify-subscribers-threshold {
type uint32;
description
"The notify-subscribers-limit threshold has been fired.";
}
leaf notify-addresses-threshold {
type percent;
description
"The notify-addresses-usage threshold has been fired.";
}
leaf notify-ports-threshold {
type percent;
description
"The notify-ports-usage threshold has been fired.";
}
}
}