From 20a773677230374ffa2d5d140f7d46032fb7bc9d Mon Sep 17 00:00:00 2001 From: Mauro Sardara Date: Fri, 18 Sep 2020 17:39:03 +0200 Subject: Revert to [HICN-638] Check if systemd is running before enabling hicn-light service Signed-off-by: Mauro Sardara Change-Id: I1810d96e001a4e6e097e1efa331b682af750925d --- .../src/host_stack/testbed/startup-client.conf | 188 --------------------- 1 file changed, 188 deletions(-) delete mode 100644 hicn-plugin/src/host_stack/testbed/startup-client.conf (limited to 'hicn-plugin/src/host_stack/testbed/startup-client.conf') diff --git a/hicn-plugin/src/host_stack/testbed/startup-client.conf b/hicn-plugin/src/host_stack/testbed/startup-client.conf deleted file mode 100644 index fb0c89c87..000000000 --- a/hicn-plugin/src/host_stack/testbed/startup-client.conf +++ /dev/null @@ -1,188 +0,0 @@ - -unix { - nodaemon - interactive - log /var/log/vpp/vpp.log - full-coredump - cli-listen /run/vpp/cli.sock - gid vpp - startup-config /home/ubuntu/host-stack/vpp/testbed/client-startup.txt -} - -api-trace { -## This stanza controls binary API tracing. Unless there is a very strong reason, -## please leave this feature enabled. - on -## Additional parameters: -## -## To set the number of binary API trace records in the circular buffer, configure nitems -## -## nitems -## -## To save the api message table decode tables, configure a filename. Results in /tmp/ -## Very handy for understanding api message changes between versions, identifying missing -## plugins, and so forth. -## -## save-api-table -} - -api-segment { - gid vpp -} - -socksvr { - default -} - -cpu { - ## In the VPP there is one main thread and optionally the user can create worker(s) - ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically - - ## Manual pinning of thread(s) to CPU core(s) - - ## Set logical CPU core where main thread runs, if main core is not set - ## VPP will use core 1 if available - main-core 1 - - ## Set logical CPU core(s) where worker threads are running - # corelist-workers 2-3,18-19 - - ## Automatic pinning of thread(s) to CPU core(s) - - ## Sets number of CPU core(s) to be skipped (1 ... N-1) - ## Skipped CPU core(s) are not used for pinning main thread and working thread(s). - ## The main thread is automatically pinned to the first available CPU core and worker(s) - ## are pinned to next free CPU core(s) after core assigned to main thread - # skip-cores 4 - - ## Specify a number of workers to be created - ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s) - ## and main thread's CPU core - # workers 2 - - ## Set scheduling policy and priority of main and worker threads - - ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH) - ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR) - # scheduler-policy fifo - - ## Scheduling priority is used only for "real-time policies (fifo and rr), - ## and has to be in the range of priorities supported for a particular policy - # scheduler-priority 50 -} - -buffers { - ## Increase number of buffers allocated, needed only in scenarios with - ## large number of interfaces and worker threads. Value is per numa node. -# Default is 16384 (8192 if running unpriviledged) - buffers-per-numa 600000 - ## Size of buffer data area - ## Default is 2048 - # default data-size 2048 -} - -# dpdk { - ## Change default settings for all interfaces - # dev default { - ## Number of receive queues, enables RSS - ## Default is 1 - # num-rx-queues 3 - - ## Number of transmit queues, Default is equal - ## to number of worker threads or 1 if no workers treads - # num-tx-queues 3 - - ## Number of descriptors in transmit and receive rings - ## increasing or reducing number can impact performance - ## Default is 1024 for both rx and tx - # num-rx-desc 512 - # num-tx-desc 512 - - ## VLAN strip offload mode for interface - ## Default is off - # vlan-strip-offload on - - ## TCP Segment Offload - ## Default is off - ## To enable TSO, 'enable-tcp-udp-checksum' must be set - # tso on - - ## Devargs - ## device specific init args - ## Default is NULL - # devargs safe-mode-support=1,pipeline-mode-support=1 - # } - - ## Whitelist specific interface by specifying PCI address - # dev 0000:13:00.0 - - ## Blacklist specific device type by specifying PCI vendor:device - ## Whitelist entries take precedence - # blacklist 8086:10fb - - ## Set interface name - # dev 0000:02:00.1 { - # name eth0 - # } - - ## Whitelist specific interface by specifying PCI address and in - ## addition specify custom parameters for this interface - # dev 0000:02:00.1 { - # num-rx-queues 2 - # } - - ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci, - ## uio_pci_generic or auto (default) - # uio-driver vfio-pci - - ## Disable multi-segment buffers, improves performance but - ## disables Jumbo MTU support - # no-multi-seg - - ## Change hugepages allocation per-socket, needed only if there is need for - ## larger number of mbufs. Default is 256M on each detected CPU socket - # socket-mem 2048,2048 - - ## Disables UDP / TCP TX checksum offload. Typically needed for use - ## faster vector PMDs (together with no-multi-seg) - # no-tx-checksum-offload - - ## Enable UDP / TCP TX checksum offload - ## This is the reversed option of 'no-tx-checksum-offload' - # enable-tcp-udp-checksum -# } - - -plugins { - ## Adjusting the plugin path depending on where the VPP plugins are - path /home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/x86_64-linux-gnu/vpp_plugins:/home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins:/home/ubuntu/host-stack/install/lib/vpp_plugins - ## Disable all plugins by default and then selectively enable specific plugins - plugin default { enable } - plugin dpdk_plugin.so { disable } - plugin hicn_plugin.so { enable } -# plugin hicn_plugin.so { enable } - - - ## Enable all plugins by default and then selectively disable specific plugins - # plugin dpdk_plugin.so { disable } - # plugin acl_plugin.so { disable } -} - -## Statistics Segment -# statseg { - # socket-name , name of the stats segment socket - # defaults to /run/vpp/stats.sock - # size [KMG], size of the stats segment, defaults to 32mb - # per-node-counters on | off, defaults to none - # update-interval , sets the segment scrape / update interval -# } - -#hicn { -# pit-size 2000000 -# cs-size 1000000 -# cs-reserved-app 10 -#} - -session { evt_qs_memfd_seg } -socksvr { socket-name /tmp/vpp-api.sock} -tcp {cc-algo cubic} -- cgit 1.2.3-korg