3 files changed, 132 insertions, 0 deletions
diff --git a/src/vpp/conf/80-vpp.conf b/src/vpp/conf/80-vpp.conf
new file mode 100644
index 00000000..8fdf184c
--- /dev/null
+++ b/src/vpp/conf/80-vpp.conf
@@ -0,0 +1,15 @@
+# Number of 2MB hugepages desired
+vm.nr_hugepages=1024
+
+# Must be greater than or equal to (2 * vm.nr_hugepages).
+vm.max_map_count=3096
+
+# All groups allowed to access hugepages
+vm.hugetlb_shm_group=0
+
+# Shared Memory Max must be greator or equal to the total size of hugepages.
+# For 2MB pages, TotalHugepageSize = vm.nr_hugepages * 2 * 1024 * 1024
+# If the existing kernel.shmmax setting  (cat /sys/proc/kernel/shmmax)
+# is greater than the calculated TotalHugepageSize then set this parameter
+# to current shmmax value.
+kernel.shmmax=2147483648
diff --git a/src/vpp/conf/startup.conf b/src/vpp/conf/startup.conf
new file mode 100644
index 00000000..bce00202
--- /dev/null
+++ b/src/vpp/conf/startup.conf
@@ -0,0 +1,99 @@
+
+unix {
+  nodaemon
+  log /tmp/vpp.log
+  full-coredump
+}
+
+api-trace {
+  on
+}
+
+api-segment {
+  gid vpp
+}
+
+cpu {
+	## In the VPP there is one main thread and optionally the user can create worker(s)
+	## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
+
+	## Manual pinning of thread(s) to CPU core(s)
+
+	## Set logical CPU core where main thread runs
+	# main-core 1
+
+	## Set logical CPU core(s) where worker threads are running
+	# corelist-workers 2-3,18-19
+
+	## Automatic pinning of thread(s) to CPU core(s)
+
+	## Sets number of CPU core(s) to be skipped (1 ... N-1)
+	## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
+	## The main thread is automatically pinned to the first available CPU core and worker(s)
+	## are pinned to next free CPU core(s) after core assigned to main thread
+	# skip-cores 4
+
+	## Specify a number of workers to be created
+	## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
+	## and main thread's CPU core
+	# workers 2
+
+	## Set scheduling policy and priority of main and worker threads
+
+	## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
+	## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
+	# scheduler-policy fifo
+
+	## Scheduling priority is used only for "real-time policies (fifo and rr),
+	## and has to be in the range of priorities supported for a particular policy
+	# scheduler-priority 50
+}
+
+dpdk {
+	## Change default settings for all intefaces
+	# dev default {
+		## Number of receive queues, enables RSS
+		## Default is 1
+		# num-rx-queues 3
+
+		## Number of transmit queues, Default is equal
+		## to number of worker threads or 1 if no workers treads
+		# num-tx-queues 3
+
+		## Number of descriptors in transmit and receive rings
+		## increasing or reducing number can impact performance
+		## Default is 1024 for both rx and tx
+		# num-rx-desc 512
+		# num-tx-desc 512
+
+		## VLAN strip offload mode for interface
+		## Default is off
+		# vlan-strip-offload on
+	# }
+
+	## Whitelist specific interface by specifying PCI address
+	# dev 0000:02:00.0
+
+	## Whitelist specific interface by specifying PCI address and in
+	## addition specify custom parameters for this interface
+	# dev 0000:02:00.1 {
+	#	num-rx-queues 2
+	# }
+
+	## Change UIO driver used by VPP, Options are: uio_pci_generic, vfio-pci
+	## and igb_uio (default)
+	# uio-driver uio_pci_generic
+
+	## Disable mutli-segment buffers, improves performance but
+	## disables Jumbo MTU support
+	# no-multi-seg
+
+	## Increase number of buffers allocated, needed only in scenarios with
+	## large number of interfaces and worker threads. Value is per CPU socket.
+	## Default is 32768
+	# num-mbufs 128000
+
+	## Change hugepages allocation per-socket, needed only if there is need for
+	## larger number of mbufs. Default is 256M on each detected CPU socket
+	# socket-mem 2048,2048
+}
diff --git a/src/vpp/conf/startup.uiopcigeneric.conf b/src/vpp/conf/startup.uiopcigeneric.conf
new file mode 100644
index 00000000..03a89dff
--- /dev/null
+++ b/src/vpp/conf/startup.uiopcigeneric.conf
@@ -0,0 +1,18 @@
+
+unix {
+  nodaemon
+  log /tmp/vpp.log
+  full-coredump
+}
+
+dpdk {
+    uio-driver uio_pci_generic
+}
+
+api-trace {
+  on
+}
+
+api-segment {
+  gid vpp
+}