From 704381d7bac04215ef270359f34658856c00d9a0 Mon Sep 17 00:00:00 2001 From: Sachin Saxena Date: Thu, 15 Jun 2017 14:34:30 +0530 Subject: Introducing ODP plugin node Change-Id: I364fa14ade5282ec828662894041f9cc784ace7c Signed-off-by: srsurend Signed-off-by: sachin saxena --- README.vppodp | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 README.vppodp (limited to 'README.vppodp') diff --git a/README.vppodp b/README.vppodp new file mode 100644 index 00000000..7ff3c865 --- /dev/null +++ b/README.vppodp @@ -0,0 +1,170 @@ + +##odp4vpp: + +#Introduction: +-------------- +odp4vpp project aims to provide VPP with an additional vnet device based on OpenDataPlane (ODP is similar yet different from DPDK), with provisions for hardwareacceleration of packet paths. It envisions three deployment scenarios: + +-Server + NICs +-Systems on a Chip +-SmartNIC with low to very high core count + +#Build Procedure: +---------------- +The source code add support to build VPP with either odp-linux or odp-dpdk. + +1)Build vpp with odp-linux: +--------------------------- +Build the odp linux package by compiling odp from odp git repository: + +git clone https://git.linaro.org/lng/odp.git + +Follow the README steps for complete build. + +cd odp +./bootstrap +./configure --prefix= +make install + +Set the environment variables with ODP config: + +export PLATFORM=odp +export ODP_INST_PATH= + +Build vpp: +Follow the README steps for complete build. + +cd vpp +make install-dep +make build +make run + +2)Build vpp with odp-dpdk: +-------------------------- +Build the odp-dpdk package by compiling odp-dpdk from odp-dpdk git repository: + +git clone https://git.linaro.org/lng/odp-dpdk.git + +Follow the README.DPDK steps for complete build with dpdk. + +cd odp-dpdk +./bootstrap +./configure --prefix= --with-sdk-install-path=/x86_64-native-linuxapp-gcc +make install + +Set the environment variables with ODP config: + +export PLATFORM=odp +export ODP_INST_PATH= + +Note : Also check and copy dpdk/odp-dpdk libraries to default /usr/lib path for linking with vpp. + +Build vpp: +Follow the README steps for complete build. + +cd vpp +make install-dep +make build +make run + +#Test Steps: +------------ +Below is a basic verification test. + +Note :For odp-dpdk the port has to bound with dpdk driver prior to test and interface name is passed as 0,1..etc. + +1)Configure odp packet interface with mode ie (0-burst,1-queue,2-schedule) default mode is 0. + +-create pktio-interface name hw-addr mode <0/1/2> +-set int ip address odp- X.X.X.X/24 +-set int state odp- up + +2)Check the interface state: +-sh int + +3)Ping the configured interface from host machine and check the ARP and ipv4 FIB table: +-sh ip arp +-sh ip fib + +4)Check the interface counters: +-sh int + +5)Check the statistics: +-show run + +6)Packet trace can be enabled using : +-trace add odp-packet-input 10 +-show trace + +7)Delete the interface: +-delete pktio-interface name + + +Example: +-------- +Below is example config logs: + +with odp-linux: + +DBGvpp# create pktio-interface name enp0s8 hw-addr 08:00:27:1b:5e:48 +odp-enp0s8 +DBGvpp# set int ip address odp-enp0s8 192.168.1.4/24 +DBGvpp# set int state odp-enp0s8 up +DBGvpp# sh int + Name Idx State Counter Count +local0 0 down +odp-enp0s8 1 up rx packets 1 + rx bytes 60 + drops 1 +DBGvpp# sh int addr +local0 (dn): +odp-enp0s8 (up): + 192.168.1.4/24 +DBGvpp# sh int + Name Idx State Counter Count +local0 0 down drops 1 +odp-enp0s8 1 up rx packets 12 + rx bytes 902 + tx packets 5 + tx bytes 324 + drops 4 + punts 3 + ip4 7 +DBGvpp# sh ip arp + Time IP4 Flags Ethernet Interface + 171.7151 192.168.1.1 D c8:3a:35:19:ea:f0 odp-enp0s8 + 185.0099 192.168.1.3 D 48:45:20:11:41:ad odp-enp0s8 +DBGvpp# + +with odp-dpdk: + +sreejith@sreejith-VirtualBox:~/vppdodp/vpp_odp_dpdk/dpdk$ sudo ./usertools/dpdk-devbind.py --status + +Network devices using DPDK-compatible driver +============================================ +0000:00:08.0 '82540EM Gigabit Ethernet Controller' drv=igb_uio unused=e1000 +0000:00:09.0 '82540EM Gigabit Ethernet Controller' drv=igb_uio unused=e1000 + + +DBGvpp# create pktio-interface name 0 hw-addr 08:00:27:1b:5e:48 +odp-0 +DBGvpp# sh int + Name Idx State Counter Count +local0 0 down +odp-0 1 down + +DBGvpp# set int ip address odp-0 192.168.1.4/24 +DBGvpp# set int state odp-0 up +DBGvpp# sh int + Name Idx State Counter Count +local0 0 down +odp-0 1 up rx packets 13 + rx bytes 1960 + tx packets 1 + tx bytes 42 + drops 13 + ip4 7 + ip6 4 + + + -- cgit 1.2.3-korg