From 7cd468a3d7dee7d6c92f69a0bb7061ae208ec727 Mon Sep 17 00:00:00 2001 From: Damjan Marion Date: Mon, 19 Dec 2016 23:05:39 +0100 Subject: Reorganize source tree to use single autotools instance Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion --- src/scripts/vnet/virl/ip6sr.virl | 874 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 874 insertions(+) create mode 100644 src/scripts/vnet/virl/ip6sr.virl (limited to 'src/scripts/vnet/virl/ip6sr.virl') diff --git a/src/scripts/vnet/virl/ip6sr.virl b/src/scripts/vnet/virl/ip6sr.virl new file mode 100644 index 00000000..5d4d1a0a --- /dev/null +++ b/src/scripts/vnet/virl/ip6sr.virl @@ -0,0 +1,874 @@ + + + + flat + dual_stack + false + + + + ! +! Last configuration change at 16:41:18 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-1 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.2 255.255.255.255 + ipv6 address ::B:1:0:0:2/128 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.193 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.5 255.255.255.252 + duplex auto + speed auto + media-type rj45 + ipv6 address ::A:1:1:0:6/126 +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +! +! route to iosv-2 +ipv6 route ::A:1:1:0:16/128 ::A:1:1:0:7 +! route to iosv-4 +ipv6 route ::A:1:1:0:22/128 ::A:1:1:0:7 +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end + + + + + + + ! +! Last configuration change at 16:41:10 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-2 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.3 255.255.255.255 + ipv6 address ::B:1:0:0:3/128 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.191 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-2 + ip address 10.0.0.21 255.255.255.252 + duplex auto + speed auto + media-type rj45 + ipv6 address ::A:1:1:0:16/126 +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +! +ipv6 route ::A:1:1:0:6/128 ::A:1:1:0:17 +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end + + + + + + + ! +! Last configuration change at 16:27:43 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-3 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.6 255.255.255.255 + ipv6 address ::B:1:0:0:4/128 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.192 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.9 255.255.255.252 + duplex auto + speed auto + media-type rj45 + ipv6 address ::A:1:1:0:A/126 +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end + + + + + + + ! +! Last configuration change at 16:27:43 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-4 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.8 255.255.255.255 + ipv6 address ::B:1:0:0:5/128 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.194 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-2 + ip address 10.0.0.33 255.255.255.252 + duplex auto + speed auto + media-type rj45 + ipv6 address ::A:1:1:0:22/126 +! +! Route to iosv-1 +ipv6 route ::A:1:1:0:6/128 ::A:1:1:0:23 +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end + + + + + + + #cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-1 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 + set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:7/126 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.10/30 + set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:b/126 + set interface state GigabitEthernet0/5/0 up + set interface ip address GigabitEthernet0/6/0 10.0.0.13/30 + set interface ip address GigabitEthernet0/6/0 ::a:1:1:0:e/126 + set interface state GigabitEthernet0/6/0 up + set interface ip address GigabitEthernet0/7/0 10.0.0.17/30 + set interface ip address GigabitEthernet0/7/0 ::a:1:1:0:12/126 + set interface state GigabitEthernet0/7/0 up + sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:16/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:16 tag 0::a:1:1:0:7 InPE 1 clean + sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:22/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:22 tag 0::a:1:1:0:7 InPE 1 clean + + + + + + + + + + #cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-2 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.25/30 + set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:1a/126 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.29/30 + set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1e/126 + set interface state GigabitEthernet0/5/0 up + set interface ip address GigabitEthernet0/6/0 10.0.0.22/30 + set interface ip address GigabitEthernet0/6/0 ::a:1:1:0:17/126 + set interface state GigabitEthernet0/6/0 up + set interface ip address GigabitEthernet0/7/0 10.0.0.34/30 + set interface ip address GigabitEthernet0/7/0 ::a:1:1:0:23/126 + set interface state GigabitEthernet0/7/0 up + sr tunnel src 0::a:1:1:0:16 dst 0::a:1:1:0:6/128 next 0::a:1:1:0:1b next 0::a:1:1:0:e next 0::a:1:1:0:6 tag 0::a:1:1:0:17 InPE 1 clean + + + + + + + + + + #cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-3 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.14/30 + set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:f/126 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.26/30 + set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1b/126 + set interface state GigabitEthernet0/5/0 up + comment { fix src rpf drop screws} + ip route add ::a:1:1:0:6/128 via drop + ip route add ::a:1:1:0:16/128 via drop + ip route add ::a:1:1:0:22/128 via drop + + + + + + + + #cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-4 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.18/30 + set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:13/126 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.30/30 + set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1f/126 + set interface state GigabitEthernet0/5/0 up + + + + + + + + + + + + + + -- cgit 1.2.3-korg