From 0f26c5a0138ac86d7ebd197c31a09d8d624c35fe Mon Sep 17 00:00:00 2001 From: Neale Ranns Date: Wed, 1 Mar 2017 15:12:11 -0800 Subject: MPLS Mcast 1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns --- src/vnet/devices/ssvm/node.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/vnet/devices') diff --git a/src/vnet/devices/ssvm/node.c b/src/vnet/devices/ssvm/node.c index 539b4161..b7a8db05 100644 --- a/src/vnet/devices/ssvm/node.c +++ b/src/vnet/devices/ssvm/node.c @@ -210,7 +210,7 @@ ssvm_eth_device_input (ssvm_eth_main_t * em, next0 = SSVM_ETH_INPUT_NEXT_IP4_INPUT; else if (type0 == ETHERNET_TYPE_IP6) next0 = SSVM_ETH_INPUT_NEXT_IP6_INPUT; - else if (type0 == ETHERNET_TYPE_MPLS_UNICAST) + else if (type0 == ETHERNET_TYPE_MPLS) next0 = SSVM_ETH_INPUT_NEXT_MPLS_INPUT; l3_offset0 = ((next0 == SSVM_ETH_INPUT_NEXT_IP4_INPUT || -- cgit 1.2.3-korg