# Release Notes {#release_notes} * @subpage release_notes_17011 * @subpage release_notes_1701 * @subpage release_notes_1609 * @subpage release_notes_1606 @page release_notes_17011 Release notes for VPP 17.01.1 This is bug fix release. For the full list of fixed issues please reffer to: - fd.io [JIRA](https://jira.fd.io) - git [commit log](https://git.fd.io/vpp/log/?h=stable/1701) @page release_notes_1701 Release notes for VPP 17.01 @note This release was for a while known as 16.12. ## Features - [Integrated November 2016 DPDK release](http://www.dpdk.org/doc/guides/rel_notes/release_16_11.html) - Complete rework of Forwarding Information Base (FIB) - Performance Improvements - Improvements in DPDK input and output nodes - Improvements in L2 path - Improvmeents in IPv4 lookup node - Feature Arcs Improvements - Consolidation of the code - New feature arcs - device-input - interface-output - DPDK Cryptodev Support - Software and Hardware Crypto Support - DPDK HQoS support - Simple Port Analyzer (SPAN) - Bidirectional Forwarding Detection - Basic implementation - IPFIX Improvements - L2 GRE over IPSec tunnels - Link Layer Discovery Protocol (LLDP) - Vhost-user Improvements - Performance Improvements - Multiqueue - Reconnect - LISP Enhancements - Source/Dest control plane support - L2 over LISP and GRE - Map-Register/Map-Notify/RLOC-probing support - L2 API improvements, overall code hardening - Plugins: - New: ACL - New: Flow per Packet - Improved: SNAT - Mutlithreading - Flow export - Doxygen Enhancements - Luajit API bindings - API Refactoring - file split - message signatures - Python and Scapy based unit testing infrastructure - Infrastructure - Various tests - Packet Generator improvements - TUN/TAP jumbo frames support - Other various bug fixes and improvements ## Known issues For the full list of issues please reffer to fd.io [JIRA](https://jira.fd.io). ## Issues fixed For the full list of fixed issues please reffer to: - fd.io [JIRA](https://jira.fd.io) - git [commit log](https://git.fd.io/vpp/log/?h=stable/1701) @page release_notes_1609 Release notes for VPP 16.09 ## Features - [Integrated July 2016 DPDK release](http://www.dpdk.org/doc/guides/rel_notes/release_16_07.html) - DPDK-vhost is depreciated pending a complete rework of the original integration and addressing of rx performance deltas. - Patches required for DPDK 16.07: - Correctly setting the Packet Type in the IGB, IXGBE and i40e drivers. - Correctly setting checksum in the i40e driver. - NXP DPAA2 PMD Driver. - rte_delay (yield) functionality. - Add “in tree” plugins: - IPv6 ILA. - iOAM. - Load Balancer. - SNAT. - High-performance (line-rate) “neutron like” L4 port-filtering. - API refactoring - addressing some of the issues around JVPP bindings. - Accommodating plugins [(e.g. NSH_SFC)](https://wiki.fd.io/view/NSH_SFC) - Binding for [python](https://wiki.fd.io/view/VPP/Python_API) - LISP - L2 LISP overlays - Multitenancy - Multihoming - RTR mode - Map-resolver failover algorithm - Support 64-bit vector lengths, huge shared-memory segments. - Dynamic IP Feature ordering - IP Features can now specify features they appear before and after - 16.09 Builds - Ubuntu 14.04 LTS - Trusty Tahr - Ubuntu 16.04 LTS - Xenial Xerus - CentOS 7 - More information on [VPP wiki](https://wiki.fd.io/view/VPP/Installing_VPP_binaries_from_packages) - Performance, characterize and document performance for this release [(more information on CSIT page)](https://wiki.fd.io/view/CSIT) - IPv4 and IPv6 Scale - performance tests. - Bidirectional 10k/100k/1M flows. - 64B,570B, 1518B,9000B packet sizes. - IPv6 iACL - performance - DUT1 and DUT2 are configured with IPv6 routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist ingress /64 filter entries applied on links. - TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv6 header and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces. - L2XC VXLANoIPv4 - performance - DUT1 and DUT2 are configured with L2 cross-connect. VXLAN tunnels are configured between L2XCs on DUT1 and DUT2. - TG traffic profile contains two L3 flow-groups (flow-group per direction, 253 flows per flow-group) with all packets containing Ethernet header, IPv4 header with IP protocol=61 and generated payload. MAC addresses are matching MAC addresses of the TG node interfaces. - Documentation - Autogenerated CLI documentation. - Using doxygen to automate API/Node documentation. - [(available online)](https://docs.fd.io/vpp/16.09/) - Resolved all static analysis issues found by Coverity - Beginning of 16.09 cycle: 505 issues. - Release: 0 outstanding issues. ## Known issues Issues in fd.io are tracked in [JIRA](https://jira.fd.io). Issue | Description --- | --- VPP-391 | vpp debug version assert appeared in the process of start VPP-380 | Mapping algorithm compute wrong ea-bits when IPv4 prefix 0.0.0.0/0 VPP-371 | load_one_plugin:63: Loaded plugin: message from vppctl VPP-367 | vpp packages need to depend on specific versions of each other VPP-312 | IP6 FIB gets in indeterminate state by duplicating commands VPP-224 | Lookup-in-vrf can not be set correctly VPP-206 | Fix classify table delete VPP-203 | Fix binary API for reading vpp node graph VPP-147 | Inconsistent behaviour when adding L2 FIB filter entry VPP-99 | VPP doesn't discard DHCPOFFER message with wrong XID ## Issues fixed Issues in fd.io are tracked in [JIRA](https://jira.fd.io). Issue | Description --- | --- VPP-396 | Ubuntu systems Graphviz bug VPP-390 | vpp-lib rpm fails to include *.so symlinks, causing linking problems with out of tree builds VPP-388 | IPSec output feature assumes packets have been ethernet rewritten VPP-385 | ARP for indirect adjacencies not working correctly VPP-361 | Memory leak on delete of VXLAN over IPv6 tunnel VPP-357 | VNI not set correctly when removing LISP fwd entries VPP-349 | sw_interface_vhost_user_dump not working VPP-345 | net/enic: bad L4 checksum ptype set on ICMP packets VPP-340 | MAP-T wrong destination address VPP-330 | Use fifo to store LISP pending map-requests VPP-326 | map_add_domain VAT command: unable to configure domain with mtu parameter VPP-318 | The map_add_domain VAT command accepts invalid arguments VPP-315 | Fix "show vxlan-gpe" issue VPP-310 | Mapping algorithm compute wrong ea-bits VPP-239 | LISP IP forwarding does not tag packets that hit negative mapping entries VPP-235 | Invalid help in VAT for sw_interface_set_l2_bridge VPP-228 | Mapping algorithm sends packet to wrong IPv6 address VPP-214 | vpp-api-test: api_ipsec_sad_add_del_entry: vector "ck" not initialized VPP-200 | VPP - TAP port create problem VPP-189 | Coverity Issues for 16.09 VPP-184 | u16 translating to char ,not short VPP-179 | Adjacency share-count botch VPP-163 | "show ip6 interface" ignores non-global addresses VPP-155 | Netmap: Inconsistency in interface state between "show hardware" and "show interface" VPP-145 | Dynamically compute IP feature ordering based on constraints VPP-137 | VPP sends ARP with wrong requested IP VPP-118 | JVpp: 0 length arrays not handled properly in VPP responses VPP-112 | linux kernel info missing from build log VPP-110 | vxlan encap node should never touch a deleted tunnel VPP-107 | RPM build broken in master VPP-92 | segment routing is not properly filling out the segment list VPP-91 | segment routing add/del tunnel lookup doesn't work VPP-84 | af_packet throws a fatal error on EAGAIN VPP-74 | Clang compile fails due to warning in vlib/unix/cli.c VPP-64 | Top level "make pkg-deb" fails if CDPATH is set in user env. VPP-48 | Traceroute does not terminate when VPP is the target VPP-23 | CLI pager does not gracefully handle lines longer than the terminal width @page release_notes_1606 Release notes for VPP 16.06 The FD.io Project, relentlessly focused on data IO speed and efficiency supporting the creation of high performance, flexible, and scalable software defined infrastructures, announces the availability of the community’s first software release (16.06). In the four months since launching, FD.io has brought together more than 75 developers from 11 different companies including network operators, solution providers chip vendors, and network equipment vendors who are collaborating to enhance and innovate around the Vector Packet Processing (VPP) technology. The FD.io community has quickly formed to grow the number of projects from the initial VPP project to an additional 6 projects addressing a diverse set of requirements and usability across a variety of deployment environments. The 16.06 release brings unprecedented performance: 480Gbps/200mpps with 8 million routes and 2k whitelist entries on standard high volume x86 servers. ## Features In addition to the existing full suite of vswitch/vrouter features, the new 16.06 release adds: * Enhanced Switching and Routing: * IPv6 Segment Routing multicast support. * LISP xTR support. * VXLAN over IPv6 underlay. * Per interface whitelists. * Shared adjacencies in FIB. * New and improved interface support: * Jumbo frame support for vhost-user. * Netmap interface support. * AF_Packet interface support. * Expanded and improved programmability: * Python API bindings. * Enhanced JVPP Java API bindings. * Debugging CLI. * Expanded Hardware and Software Support: * Support for ARM 32 targets including Rasberry Pi single-board computer. * Support for DPDK 16.04.