/* Hey Emacs use -*- mode: C -*- */
/*
* Copyright (c) 2015 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/** \file
This file defines vpe control-plane API messages which are generally
called through a shared memory interface.
*/
/** \brief Register for interface events
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable - 1 => register for events, 0 => cancel registration
@param pid - sender's pid
*/
define want_interface_events {
u32 client_index;
u32 context;
u32 enable_disable;
u32 pid;
};
/** \brief Reply for interface events registration
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define want_interface_events_reply {
u32 context;
i32 retval;
};
/** \brief Interface details structure (fix this)
@param sw_if_index - index of the interface
@param sup_sw_if_index - index of parent interface if any, else same as sw_if_index
@param l2_address_length - length of the interface's l2 address
@param pid - the interface's l2 address
@param interface_name - name of the interface
@param link_duplex - 1 if half duplex, 2 if full duplex
@param link_speed - 1 = 10M, 2 = 100M, 4 = 1G, 8 = 10G, 16 = 40G, 32 = 100G
@param link_MTU - max. transmittion unit
@param sub_if_id - A number 0-N to uniquely identify this subif on super if
@param sub_dot1ad - 0 = dot1q, 1=dot1ad
@param sub_number_of_tags - Number of tags (0 - 2)
@param sub_outer_vlan_id
@param sub_inner_vlan_id
@param sub_exact_match
@param sub_default
@param sub_outer_vlan_id_any
@param sub_inner_vlan_id_any
@param vtr_op - vlan tag rewrite operation
@param vtr_push_dot1q
@param vtr_tag1
@param vtr_tag2
*/
manual_java define sw_interface_details {
u32 sw_if_index;
/* index of sup interface (e.g. hw interface).
equal to sw_if_index for super hw interface. */
u32 sup_sw_if_index;
/* Layer 2 address, if applicable */
u32 l2_address_length;
u8 l2_address[8];
/* Interface name */
u8 interface_name[64];
/* 1 = up, 0 = down */
u8 admin_up_down;
u8 link_up_down;
/* 1 = half duplex, 2 = full duplex */
u8 link_duplex;
/* 1 = 10M, 2 = 100M, 4 = 1G, 8 = 10G, 16 = 40G, 32 = 100G */
u8 link_speed;
/* MTU */
u16 link_mtu;
/* Subinterface ID. A number 0-N to uniquely identify this subinterface under the super interface*/
u32 sub_id;
/* 0 = dot1q, 1=dot1ad */
u8 sub_dot1ad;
/* Number of tags 0-2 */
u8 sub_number_of_tags;
u16 sub_outer_vlan_id;
u16 sub_inner_vlan_id;
u8 sub_exact_match;
u8 sub_default;
u8 sub_outer_vlan_id_any;
u8 sub_inner_vlan_id_any;
/* vlan tag rewrite state */
u32 vtr_op;
u32 vtr_push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad
u32 vtr_tag1; // first pushed tag
u32 vtr_tag2; // second pushed tag
};
/** \brief Set flags on the interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of the interface to set flags on
@param admin_up_down - set the admin state, 1 = up, 0 = down
@param link_up_down - Oper state sent on change event, not used in config.
@param deleted - interface was deleted
*/
define sw_interface_set_flags {
u32 client_index;
u32 context;
u32 sw_if_index;
/* 1 = up, 0 = down */
u8 admin_up_down;
u8 link_up_down;
u8 deleted;
};
/** \brief Reply to sw_interface_set_flags
@param context - sender context which was passed in the request
@param retval - return code of the set flags request
*/
define sw_interface_set_flags_reply {
u32 context;
i32 retval;
};
/* works */
manual_java define sw_interface_dump {
u32 client_index;
u32 context;
u8 name_filter_valid;
u8 name_filter[49];
};
/** \brief Set or delete one or all ip addresses on a specified interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of the interface to add/del addresses
@param is_add - add address if non-zero, else delete
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param del_all - if non-zero delete all addresses on the interface
@param address_length - address length in bytes, 4 for ip4, 16 for ip6
@param address - array of address bytes
*/
define sw_interface_add_del_address {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 is_add;
u8 is_ipv6;
u8 del_all;
u8 address_length;
u8 address[16];
};
/** \brief Reply for interface events registration
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define sw_interface_add_del_address_reply {
u32 context;
i32 retval;
};
/** \brief Associate the specified interface with a fib table
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of the interface
@param is_ipv6 - if non-zero ipv6, else ipv4
@param vrf_id - fib table/vrd id to associate the interface with
*/
define sw_interface_set_table {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 is_ipv6;
u32 vrf_id;
};
/** \brief Reply for interface events registration
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define sw_interface_set_table_reply {
u32 context;
i32 retval;
};
/** \brief Initialize a new tap interface with the given paramters
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param use_random_mac - let the system generate a unique mac address
@param tap_name - name to associate with the new interface
@param mac_address - mac addr to assign to the interface if use_radom not set
*/
define tap_connect {
u32 client_index;
u32 context;
u8 use_random_mac;
u8 tap_name [64];
u8 mac_address[6];
u8 renumber;
u32 custom_dev_instance;
};
/** \brief Reply for tap connect request
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param sw_if_index - software index allocated for the new tap interface
*/
define tap_connect_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief Modify a tap interface with the given paramters
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface index of existing tap interface
@param use_random_mac - let the system generate a unique mac address
@param tap_name - name to associate with the new interface
@param mac_address - mac addr to assign to the interface if use_radom not set
*/
define tap_modify {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 use_random_mac;
u8 tap_name [64];
u8 mac_address[6];
u8 renumber;
u32 custom_dev_instance;
};
/** \brief Reply for tap modify request
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param sw_if_index - software index if the modified tap interface
*/
define tap_modify_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief Delete tap interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface index of existing tap interface
*/
define tap_delete {
u32 client_index;
u32 context;
u32 sw_if_index;
};
/** \brief Reply for tap delete request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define tap_delete_reply {
u32 context;
i32 retval;
};
/** \brief Dump tap interfaces request */
define sw_interface_tap_dump {
u32 client_index;
u32 context;
};
/** \brief Reply for tap dump request
@param sw_if_index - software index of tap interface
@param dev_name - Linux tap device name
*/
manual_java define sw_interface_tap_details {
u32 context;
u32 sw_if_index;
u8 dev_name[64];
};
/** \brief Create a new subinterface with the given vlan id
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - software index of the new vlan's parent interface
@param vlan_id - vlan tag of the new interface
*/
define create_vlan_subif {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 vlan_id;
};
/** \brief Reply for the vlan subinterface create request
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param sw_if_index - software index allocated for the new subinterface
*/
define create_vlan_subif_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief Add / del route request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - software index of the new vlan's parent interface
@param vrf_id - fib table /vrf associated with the route
@param lookup_in_vrf -
@param resolve_attempts -
@param classify_table_index -
@param create_vrf_if_needed -
@param resolve_if_needed -
@param is_add - 1 if adding the route, 0 if deleting
@param is_drop -
@param is_ipv6 - 0 if an ip4 route, else ip6
@param is_local -
@param is_classify -
@param is_multipath - Set to 1 if this is a multipath route, else 0
@param not_last - Is last or not last msg in group of multiple add/del msgs
@param next_hop_weight -
@param dst_address_length -
@param dst_address[16] -
@param next_hop_address[16] -
*/
define ip_add_del_route {
u32 client_index;
u32 context;
u32 next_hop_sw_if_index;
u32 vrf_id;
u32 lookup_in_vrf;
u32 resolve_attempts;
u32 classify_table_index;
u8 create_vrf_if_needed;
u8 resolve_if_needed;
u8 is_add;
u8 is_drop;
u8 is_ipv6;
u8 is_local;
u8 is_classify;
/* Is last/not-last message in group of multiple add/del messages. */
u8 is_multipath;
u8 not_last;
u8 next_hop_weight;
u8 dst_address_length;
u8 dst_address[16];
u8 next_hop_address[16];
};
/** \brief Reply for add / del route request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ip_add_del_route_reply {
u32 context;
i32 retval;
};
/* works */
/** \brief Add / del gre tunnel request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - software index of the new vlan's parent interface
@param inner_vrf_id -
@param outer_vrf_id -
@param is_add - 1 if adding the tunnel, 0 if deleting
@param src_address[4] - tunnel source address
@param dst_address[4] - tunnel destination address
@param intf_address -
@param intf_address_length -
*/
define mpls_gre_add_del_tunnel {
u32 client_index;
u32 context;
u32 inner_vrf_id;
u32 outer_vrf_id;
u8 is_add;
u8 l2_only;
u8 src_address[4];
u8 dst_address[4];
u8 intfc_address[4];
u8 intfc_address_length;
};
/** \brief Reply for add / del tunnel request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define mpls_gre_add_del_tunnel_reply {
u32 context;
i32 retval;
u32 tunnel_sw_if_index;
};
/** \brief Add / del MPLS encapsulation request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf id
@param dst_address[4] -
@param is_add - 1 if adding the encap, 0 if deleting
@param nlabels - number of labels
@param labels - array of labels
*/
define mpls_add_del_encap {
u32 client_index;
u32 context;
u32 vrf_id;
u8 dst_address[4];
/* 1 = add, 0 = delete */
u8 is_add;
u8 nlabels;
u32 labels[0];
};
/** \brief Reply for add / del encapsulation request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define mpls_add_del_encap_reply {
u32 context;
i32 retval;
};
/** \brief Add / del MPLS decapsulation request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param rx_vrf_id - receive vrf
@param tx_vrf_id - transmit vrf
@param label -
@param next_index -
@param s_bit -
@param is_add - 1 if adding the encap, 0 if deleting
*/
define mpls_add_del_decap {
u32 client_index;
u32 context;
u32 rx_vrf_id;
u32 tx_vrf_id;
u32 label;
u32 next_index;
u8 s_bit;
u8 is_add;
};
/** \brief Reply for MPLS decap add / del request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define mpls_add_del_decap_reply {
u32 context;
i32 retval;
};
/** \brief Proxy ARP add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - VRF / Fib table ID
@param is_add - 1 if adding the Proxy ARP range, 0 if deleting
@param low_address[4] - Low address of the Proxy ARP range
@param hi_address[4] - High address of the Proxy ARP range
*/
define proxy_arp_add_del {
u32 client_index;
u32 context;
u32 vrf_id;
u8 is_add;
u8 low_address[4];
u8 hi_address[4];
};
/** \brief Reply for proxy arp add / del request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define proxy_arp_add_del_reply {
u32 context;
i32 retval;
};
/** \brief Proxy ARP add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - Which interface to enable / disable Proxy Arp on
@param enable_disable - 1 to enable Proxy ARP on interface, 0 to disable
*/
define proxy_arp_intfc_enable_disable {
u32 client_index;
u32 context;
u32 sw_if_index;
/* 1 = on, 0 = off */
u8 enable_disable;
};
/** \brief Reply for Proxy ARP interface enable / disable request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define proxy_arp_intfc_enable_disable_reply {
u32 context;
i32 retval;
};
/** \brief IP neighbor add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf_id, only for IP4
@param sw_if_index - interface used to reach neighbor
@param is_add - 1 to add neighbor, 0 to delete
@param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4
@param is_static -
@param mac_address - l2 address of the neighbor
@param dst_address - ip4 or ip6 address of the neighbor
*/
define ip_neighbor_add_del {
u32 client_index;
u32 context;
u32 vrf_id; /* only makes sense for ip4 */
u32 sw_if_index;
/* 1 = add, 0 = delete */
u8 is_add;
u8 is_ipv6;
u8 is_static;
u8 mac_address[6];
u8 dst_address[16];
};
/** \brief Reply for IP Neighbor add / delete request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ip_neighbor_add_del_reply {
u32 context;
i32 retval;
};
/** \brief Reset VRF (remove all routes etc) request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4
@param vrf_id - ID of th FIB table / VRF to reset
*/
define reset_vrf {
u32 client_index;
u32 context;
u8 is_ipv6;
u32 vrf_id;
};
/** \brief Reply for Reset VRF request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define reset_vrf_reply {
u32 context;
i32 retval;
};
/** \brief Is Address Reachable request - DISABLED
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param next_hop_sw_if_index - index of interface used to get to next hop
@param is_ipv6 - 1 for IPv6, 0 for IPv4
@param is_error - address not found or does not match intf
@param address[] - Address in question
*/
define is_address_reachable {
u32 client_index; /* (api_main_t *) am->my_client_index */
u32 context;
u32 next_hop_sw_if_index;
u8 is_known; /* on reply, this is the answer */
u8 is_ipv6;
u8 is_error; /* address not found or does not match intf */
u8 address[16];
};
/** \brief Want Stats, register for stats updates
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable - 1 = enable stats, 0 = disable
@param pid - pid of process requesting stats updates
*/
define want_stats {
u32 client_index;
u32 context;
u32 enable_disable;
u32 pid;
};
/** \brief Reply for Want Stats request
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
manual_java define want_stats_reply {
u32 context;
i32 retval;
};
/** \brief Want stats counters structure
@param vnet_counter_type- such as ip4, ip6, punts, etc
@param is_combined - rx & tx total (all types) counts
@param first_sw_if_index - first sw index in block of index, counts
@param count - number of interfaces this stats block includes counters for
@param data - contiguous block of vlib_counter_t structures
*/
manual_java define vnet_interface_counters {
/* enums - plural - in vnet/interface.h */
u8 vnet_counter_type;
u8 is_combined;
u32 first_sw_if_index;
u32 count;
u8 data[0];
};
typeonly manual_print manual_endian define ip4_fib_counter {
u32 address;
u8 address_length;
u64 packets;
u64 bytes;
};
manual_java manual_print manual_endian define vnet_ip4_fib_counters {
u32 vrf_id;
u32 count;
vl_api_ip4_fib_counter_t c[0];
};
typeonly manual_print manual_endian define ip6_fib_counter {
u64 address[2];
u8 address_length;
u64 packets;
u64 bytes;
};
manual_java manual_print manual_endian define vnet_ip6_fib_counters {
u32 vrf_id;
u32 count;
vl_api_ip6_fib_counter_t c[0];
};
/** \brief Request for a single block of summary stats
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define vnet_get_summary_stats {
u32 client_index;
u32 context;
};
/** \brief Reply for vnet_get_summary_stats request
@param context - sender context, to match reply w/ request
@param retval - return code for request
@param total_pkts -
@param total_bytes -
@param vector_rate -
*/
define vnet_summary_stats_reply {
u32 context;
i32 retval;
u64 total_pkts[2];
u64 total_bytes[2];
f64 vector_rate;
};
/** \brief OAM event structure
@param dst_address[] -
@param state
*/
manual_java define oam_event {
u8 dst_address[4];
u8 state;
};
/** \brief Want OAM events request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable- enable if non-zero, else disable
@param pid - pid of the requesting process
*/
define want_oam_events {
u32 client_index;
u32 context;
u32 enable_disable;
u32 pid;
};
/** \brief Want OAM events response
@param context - sender context, to match reply w/ request
@param retval - return code for the want oam stats request
*/
define want_oam_events_reply {
u32 context;
i32 retval;
};
/** \brief OAM add / del target request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf_id of the target
@param src_address[] - source address to use for the updates
@param dst_address[] - destination address of the target
@param is_add - add target if non-zero, else delete
*/
define oam_add_del {
u32 client_index;
u32 context;
u32 vrf_id;
u8 src_address[4];
u8 dst_address[4];
u8 is_add;
};
/** \brief OAM add / del target response
@param context - sender context, to match reply w/ request
@param retval - return code of the request
*/
define oam_add_del_reply {
u32 context;
i32 retval;
};
/** \brief Reset fib table request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf/table id of the fib table to reset
@param is_ipv6 - an ipv6 fib to reset if non-zero, else ipv4
*/
define reset_fib {
u32 client_index;
u32 context;
u32 vrf_id;
u8 is_ipv6;
};
/** \brief Reset fib response
@param context - sender context, to match reply w/ request
@param retval - return code for the reset bfib request
*/
define reset_fib_reply {
u32 context;
i32 retval;
};
/** \brief DHCP Proxy config add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf id
@param if_ipv6 - ipv6 if non-zero, else ipv4
@param is_add - add the config if non-zero, else delete
@param insert_circuit_id - option82 suboption 1 fib number
@param dhcp_server[] - server address
@param dhcp_src_address[] - <fix this, need details>
*/
define dhcp_proxy_config {
u32 client_index;
u32 context;
u32 vrf_id;
u8 is_ipv6;
u8 is_add;
u8 insert_circuit_id;
u8 dhcp_server[16];
u8 dhcp_src_address[16];
};
/** \brief DHCP Proxy config response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define dhcp_proxy_config_reply {
u32 context;
i32 retval;
};
/** \brief DHCP Proxy set / unset vss request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param tbl_id - table id
@param oui - first part of vpn id
@param fib_id - second part of vpn id
@param is_ipv6 - ip6 if non-zero, else ip4
@param is_add - set vss if non-zero, else delete
*/
define dhcp_proxy_set_vss {
u32 client_index;
u32 context;
u32 tbl_id;
u32 oui;
u32 fib_id;
u8 is_ipv6;
u8 is_add;
};
/** \brief DHCP proxy set / unset vss response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define dhcp_proxy_set_vss_reply {
u32 context;
i32 retval;
};
/** \brief Set the ip flow hash config for a fib request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf/fib id
@param is_ipv6 - if non-zero the fib is ip6, else ip4
@param src - if non-zero include src in flow hash
@param dst - if non-zero include dst in flow hash
@param sport - if non-zero include sport in flow hash
@param dport - if non-zero include dport in flow hash
@param proto -if non-zero include proto in flow hash
@param reverse - if non-zero include reverse in flow hash
*/
define set_ip_flow_hash {
u32 client_index;
u32 context;
u32 vrf_id;
u8 is_ipv6;
u8 src;
u8 dst;
u8 sport;
u8 dport;
u8 proto;
u8 reverse;
};
/** \brief Set the ip flow hash config for a fib response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define set_ip_flow_hash_reply {
u32 context;
i32 retval;
};
/** \brief IPv6 router advertisement config request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param surpress -
@param managed -
@param other -
@param ll_option -
@param send_unicast -
@param cease -
@param is_no -
@param default_router -
@param max_interval -
@param min_interval -
@param lifetime -
@param initial_count -
@param initial_interval -
*/
define sw_interface_ip6nd_ra_config {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 surpress;
u8 managed;
u8 other;
u8 ll_option;
u8 send_unicast;
u8 cease;
u8 is_no;
u8 default_router;
u32 max_interval;
u32 min_interval;
u32 lifetime;
u32 initial_count;
u32 initial_interval;
};
/** \brief IPv6 router advertisement config response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define sw_interface_ip6nd_ra_config_reply {
u32 context;
i32 retval;
};
/** \brief IPv6 router advertisement prefix config request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index -
@param address[] -
@param address_length -
@param use_default -
@param no_advertise -
@param off_link -
@param no_autoconfig -
@param no_onlink -
@param is_no -
@param val_lifetime -
@param pref_lifetime -
*/
define sw_interface_ip6nd_ra_prefix {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 address[16];
u8 address_length;
u8 use_default;
u8 no_advertise;
u8 off_link;
u8 no_autoconfig;
u8 no_onlink;
u8 is_no;
u32 val_lifetime;
u32 pref_lifetime;
};
/** \brief IPv6 router advertisement prefix config response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define sw_interface_ip6nd_ra_prefix_reply {
u32 context;
i32 retval;
};
/** \brief IPv6 interface enable / disable request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface used to reach neighbor
@param enable - if non-zero enable ip6 on interface, else disable
*/
define sw_interface_ip6_enable_disable {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 enable; /* set to true if enable*/
};
/** \brief IPv6 interface enable / disable response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define sw_interface_ip6_enable_disable_reply {
u32 context;
i32 retval;
};
/** \brief IPv6 set link local address on interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface to set link local on
@param address[] - the new link local address
@param address_length - link local address length
*/
define sw_interface_ip6_set_link_local_address {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 address[16];
u8 address_length;
};
/** \brief IPv6 set link local address on interface response
@param context - sender context, to match reply w/ request
@param retval - error code for the request
*/
define sw_interface_ip6_set_link_local_address_reply {
u32 context;
i32 retval;
};
/** \brief Set unnumbered interface add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface with an IP address
@param unnumbered_sw_if_index - interface which will use the address
@param is_add - if non-zero set the association, else unset it
*/
define sw_interface_set_unnumbered {
u32 client_index;
u32 context;
u32 sw_if_index; /* use this intfc address */
u32 unnumbered_sw_if_index; /* on this interface */
u8 is_add;
};
/** \brief Set unnumbered interface add / del response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define sw_interface_set_unnumbered_reply {
u32 context;
i32 retval;
};
/** \brief Create loopback interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param mac_address - mac addr to assign to the interface if none-zero
*/
define create_loopback {
u32 client_index;
u32 context;
u8 mac_address[6];
};
/** \brief Create loopback interface response
@param context - sender context, to match reply w/ request
@param sw_if_index - sw index of the interface that was created
@param retval - return code for the request
*/
define create_loopback_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief Delete loopback interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - sw index of the interface that was created
*/
define delete_loopback {
u32 client_index;
u32 context;
u32 sw_if_index;
};
/** \brief Delete loopback interface response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define delete_loopback_reply {
u32 context;
i32 retval;
};
/** \brief Control ping from client to api server request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
manual_java define control_ping {
u32 client_index;
u32 context;
};
/** \brief Control ping from the client to the server response
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param retval - return code for the request
@param vpe_pid - the pid of the vpe, returned by the server
*/
manual_java define control_ping_reply {
u32 context;
i32 retval;
u32 client_index;
u32 vpe_pid;
};
/** \brief Process a vpe parser cli string request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param cmd_in_shmem - pointer to cli command string
*/
define cli_request {
u32 client_index;
u32 context;
u64 cmd_in_shmem;
};
/** \brief vpe parser cli string response
@param context - sender context, to match reply w/ request
@param retval - return code for request
@param reply_in_shmem - Reply string from cli processing if any
*/
define cli_reply {
u32 context;
u32 retval;
u64 reply_in_shmem;
};
/** \brief Set max allowed ARP or ip6 neighbor entries request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_ipv6 - neighbor limit if non-zero, else ARP limit
@param arp_neighbor_limit - the new limit, defaults are ~ 50k
*/
define set_arp_neighbor_limit {
u32 client_index;
u32 context;
u8 is_ipv6;
u32 arp_neighbor_limit;
};
/** \brief Set max allowed ARP or ip6 neighbor entries response
@param context - sender context, to match reply w/ request
@param retval - return code for request
*/
define set_arp_neighbor_limit_reply {
u32 context;
i32 retval;
};
/** \brief L2 interface patch add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param rx_sw_if_index - receive side interface
@param tx_sw_if_index - transmit side interface
@param is_add - if non-zero set up the interface patch, else remove it
*/
define l2_patch_add_del {
u32 client_index;
u32 context;
u32 rx_sw_if_index;
u32 tx_sw_if_index;
u8 is_add;
};
/** \brief L2 interface patch add / del response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define l2_patch_add_del_reply {
u32 context;
i32 retval;
};
/** \brief IPv6 segment routing tunnel add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add the tunnel if non-zero, else delete it
@param src_address[] -
@param dst_address[] -
@param dst_mask_width -
@param inner_vrf_id -
@param outer_vrf_id -
@param flags_net_byte_order -
@param n_segments -
@param n_tags -
@param segs_and_tags[] -
*/
define sr_tunnel_add_del {
u32 client_index;
u32 context;
u8 is_add;
u8 src_address[16];
u8 dst_address[16];
u8 dst_mask_width;
u32 inner_vrf_id;
u32 outer_vrf_id;
u16 flags_net_byte_order;
u8 n_segments;
u8 n_tags;
u8 segs_and_tags[0];
};
/** \brief IPv6 segment routing tunnel add / del response
@param context - sender context, to match reply w/ request
@param retval - return value for request
*/
define sr_tunnel_add_del_reply {
u32 context;
i32 retval;
};
/** \brief Interface set vpath request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface used to reach neighbor
@param enable - if non-zero enable, else disable
*/
define sw_interface_set_vpath {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 enable;
};
/** \brief Interface set vpath response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define sw_interface_set_vpath_reply {
u32 context;
i32 retval;
};
/** \brief MPLS Ethernet add / del tunnel request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param vrf_id - vrf_id, only for IP4
@param sw_if_index - interface used to reach neighbor
@param is_add - add if set, tunnel delete if 0
@param dst_mac_address -
@param adj_address -
@param adj_address_length -
*/
define mpls_ethernet_add_del_tunnel {
u32 client_index;
u32 context;
u32 vrf_id;
u32 tx_sw_if_index;
u8 is_add;
u8 l2_only;
u8 dst_mac_address[6];
u8 adj_address[4];
u8 adj_address_length;
};
/** \brief Reply for MPLS Ethernet add / delete tunnel request
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define mpls_ethernet_add_del_tunnel_reply {
u32 context;
i32 retval;
u32 tunnel_sw_if_index;
};
/** \brief MPLS Ethernet add/ del tunnel 2
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param inner_vrf_id -
@param outer_vrf_id -
@param resolve_attempts -
@param resolve_opaque -
@param resolve_if_needed -
@param is_add -
@param adj_address -
@param adj_address_length -
@param next_hop_ip4_address_in_outer_vrf -
*/
define mpls_ethernet_add_del_tunnel_2 {
u32 client_index;
u32 context;
u32 inner_vrf_id;
u32 outer_vrf_id;
u32 resolve_attempts;
u32 resolve_opaque; /* no need to set this */
u8 resolve_if_needed;
u8 is_add;
u8 l2_only;
u8 adj_address[4];
u8 adj_address_length;
u8 next_hop_ip4_address_in_outer_vrf [4];
};
/** \brief MPLS Ethernet add/ del tunnel 2
@param context - sender context, to match reply w/ request
@param retval - return code for add /del request
*/
define mpls_ethernet_add_del_tunnel_2_reply {
u32 context;
i32 retval;
};
/** \brief Set L2 XConnect between two interfaces request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param rx_sw_if_index - Receive interface index
@param tx_sw_if_index - Transmit interface index
@param enable - enable xconnect if not 0, else set to L3 mode
*/
define sw_interface_set_l2_xconnect {
u32 client_index;
u32 context;
u32 rx_sw_if_index;
u32 tx_sw_if_index;
u8 enable;
};
/** \brief Set L2 XConnect response
@param context - sender context, to match reply w/ request
@param retval - L2 XConnect request return code
*/
define sw_interface_set_l2_xconnect_reply {
u32 context;
i32 retval;
};
/** \brief Interface bridge mode request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param rx_sw_if_index - the interface
@param bd_id - bridge domain id
@param bvi - Setup interface as a bvi, bridge mode only
@param shg - Shared horizon group, for bridge mode only
@param enable - Enable beige mode if not 0, else set to L3 mode
*/
define sw_interface_set_l2_bridge {
u32 client_index;
u32 context;
u32 rx_sw_if_index;
u32 bd_id;
u8 shg;
u8 bvi;
u8 enable;
};
/** \brief Interface bridge mode response
@param context - sender context, to match reply w/ request
@param retval - Bridge mode request return code
*/
define sw_interface_set_l2_bridge_reply {
u32 context;
i32 retval;
};
/** \brief L2 FIB add entry request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param mac - the entry's mac address
@param bd_id - the entry's bridge domain id
@param sw_if_index - the interface
@param is_add - If non zero add the entry, else delete it
@param static_mac -
@param filter_mac -
*/
define l2fib_add_del {
u32 client_index;
u32 context;
u64 mac;
u32 bd_id;
u32 sw_if_index;
u8 is_add;
u8 static_mac;
u8 filter_mac;
};
/** \brief L2 FIB add entry response
@param context - sender context, to match reply w/ request
@param retval - return code for the add l2fib entry request
*/
define l2fib_add_del_reply {
u32 context;
i32 retval;
};
/** \brief Set L2 flags request !!! TODO - need more info, feature bits in l2_input.h
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface
@param is_set - if non-zero, set the bits, else clear them
@param feature_bitmap - non-zero bits to set or clear
*/
define l2_flags {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 is_set;
u32 feature_bitmap;
};
/** \brief Set L2 bits response
@param context - sender context, to match reply w/ request
@param retval - return code for the set l2 bits request
*/
define l2_flags_reply {
u32 context;
u32 retval;
u32 resulting_feature_bitmap;
};
/** \brief Set bridge flags (such as L2_LEARN, L2_FWD, L2_FLOOD,
L2_UU_FLOOD, or L2_ARP_TERM) request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param bd_id - the bridge domain to set the flags for
@param is_set - if non-zero, set the flags, else clear them
@param feature_bitmap - bits that are non-zero to set or clear
*/
define bridge_flags {
u32 client_index;
u32 context;
u32 bd_id;
u8 is_set;
u32 feature_bitmap;
};
/** \brief Set bridge flags response
@param context - sender context, to match reply w/ request
@param retval - return code for the set bridge flags request
@param resulting_feature_bitmap - the feature bitmap value after the request is implemented
*/
define bridge_flags_reply {
u32 context;
u32 retval;
u32 resulting_feature_bitmap;
};
/** \brief Set bridge domain ip to mac entry request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param bd_id - the bridge domain to set the flags for
@param is_add - if non-zero, add the entry, else clear it
@param is_ipv6 - if non-zero, ipv6 address, else ipv4 address
@param mac_address - MAC address
@param
*/
define bd_ip_mac_add_del {
u32 client_index;
u32 context;
u32 bd_id;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
u8 mac_address[6];
};
/** \brief Set bridge domain ip to mac entry response
@param context - sender context, to match reply w/ request
@param retval - return code for the set bridge flags request
*/
define bd_ip_mac_add_del_reply {
u32 context;
u32 retval;
};
/** \brief Add/Delete classification table request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add- if non-zero add the table, else delete it
@param table_index - if add, reuturns index of the created table, else specifies the table to delete
@param nbuckets - number of buckets when adding a table
@param memory_size - memory size when adding a table
@param match_n_vectors - number of match vectors
@param next_table_index - index of next table
@param miss_next_index - index of miss table
@param mask[] - match mask
*/
define classify_add_del_table {
u32 client_index;
u32 context;
u8 is_add;
u32 table_index;
u32 nbuckets;
u32 memory_size;
u32 skip_n_vectors;
u32 match_n_vectors;
u32 next_table_index;
u32 miss_next_index;
u8 mask[0];
};
/** \brief Add/Delete classification table response
@param context - sender context, to match reply w/ request
@param retval - return code for the table add/del requst
@param new_table_index - for add, returned index of the new table
@param skip_n_vectors - for add, returned value of skip_n_vectors in table
@param match_n_vectors -for add, returned value of match_n_vectors in table
*/
define classify_add_del_table_reply {
u32 context;
i32 retval;
u32 new_table_index;
u32 skip_n_vectors;
u32 match_n_vectors;
};
/** \brief Classify add / del session request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add session if non-zero, else delete
@param table_index - index of the table to add/del the session, required
@param hit_next_index - for add, hit_next_index of new session, required
@param opaque_index - for add, opaque_index of new session
@param advance -for add, advance value for session
@param match[] - for add, match value for session, required
*/
define classify_add_del_session {
u32 client_index;
u32 context;
u8 is_add;
u32 table_index;
u32 hit_next_index;
u32 opaque_index;
i32 advance;
u8 match[0];
};
/** \brief Classify add / del session response
@param context - sender context, to match reply w/ request
@param retval - return code for the add/del session request
*/
define classify_add_del_session_reply {
u32 context;
i32 retval;
};
/** \brief Set/unset the classification table for an interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_ipv6 - ipv6 if non-zero, else ipv4
@param sw_if_index - interface to associate with the table
@param table_index - index of the table, if ~0 unset the table
*/
define classify_set_interface_ip_table {
u32 client_index;
u32 context;
u8 is_ipv6;
u32 sw_if_index;
u32 table_index; /* ~0 => off */
};
/** \brief Set/unset interface classification table response
@param context - sender context, to match reply w/ request
@param retval - return code
*/
define classify_set_interface_ip_table_reply {
u32 context;
i32 retval;
};
/** \brief Set/unset l2 classification tables for an interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface to set/unset tables for
@param ip4_table_index - ip4 index, use ~0 for all 3 indexes to unset
@param ip6_table_index - ip6 index
@param other_table_index - other index
*/
define classify_set_interface_l2_tables {
u32 client_index;
u32 context;
u32 sw_if_index;
/* 3 x ~0 => off */
u32 ip4_table_index;
u32 ip6_table_index;
u32 other_table_index;
};
/** \brief Set/unset l2 classification tables for an interface response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define classify_set_interface_l2_tables_reply {
u32 context;
i32 retval;
};
/** \brief Get node index using name request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param node_name[] - name of the node
*/
define get_node_index {
u32 client_index;
u32 context;
u8 node_name[64];
};
/** \brief Get node index using name request
@param context - sender context, to match reply w/ request
@param retval - return code for the request
@param node_index - index of the desired node if found, else ~0
*/
define get_node_index_reply {
u32 context;
i32 retval;
u32 node_index;
};
/** \brief Set the next node for a given node request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param node_name[] - node to add the next node to
@param next_name[] - node to add as the next node
*/
define add_node_next {
u32 client_index;
u32 context;
u8 node_name[64];
u8 next_name[64];
};
/** \brief IP Set the next node for a given node response
@param context - sender context, to match reply w/ request
@param retval - return code for the add next node request
@param next_index - the index of the next node if success, else ~0
*/
define add_node_next_reply {
u32 context;
i32 retval;
u32 next_index;
};
/** \brief DHCP Proxy config 2 add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param rx_vrf_id - receive vrf id
@param server_vrf_id - server vrf id
@param if_ipv6 - ipv6 if non-zero, else ipv4
@param is_add - add the config if non-zero, else delete
@param insert_circuit_id - option82 suboption 1 fib number
@param dhcp_server[] - server address
@param dhcp_src_address[] - <fix this, need details>
*/
define dhcp_proxy_config_2 {
u32 client_index;
u32 context;
u32 rx_vrf_id;
u32 server_vrf_id;
u8 is_ipv6;
u8 is_add;
u8 insert_circuit_id;
u8 dhcp_server[16];
u8 dhcp_src_address[16];
};
/** \brief DHCP Proxy config 2 add / del response
@param context - sender context, to match reply w/ request
@param retval - return code for request
*/
define dhcp_proxy_config_2_reply {
u32 context;
i32 retval;
};
/** \brief l2tpv3 tunnel interface create request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param client_address - remote client tunnel ip address
@param client_address - local tunnel ip address
@param is_ipv6 - ipv6 if non-zero, else ipv4
@param local_session_id - local tunnel session id
@param remote_session_id - remote tunnel session id
@param local_cookie - local tunnel cookie
@param l2_sublayer_present - l2 sublayer is present in packets if non-zero
*/
define l2tpv3_create_tunnel {
u32 client_index;
u32 context;
u8 client_address [16];
u8 our_address [16];
u8 is_ipv6;
u32 local_session_id;
u32 remote_session_id;
u64 local_cookie;
u64 remote_cookie;
u8 l2_sublayer_present;
};
/** \brief l2tpv3 tunnel interface create response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
@param sw_if_index - index of the new tunnel interface
*/
define l2tpv3_create_tunnel_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
define l2tpv3_set_tunnel_cookies {
u32 client_index;
u32 context;
u32 sw_if_index;
u64 new_local_cookie;
u64 new_remote_cookie;
};
/** \brief L2TP tunnel set cookies response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define l2tpv3_set_tunnel_cookies_reply {
u32 context;
i32 retval;
};
manual_java define sw_if_l2tpv3_tunnel_details {
u32 sw_if_index;
u8 interface_name[64];
u8 client_address [16];
u8 our_address [16];
u32 local_session_id;
u32 remote_session_id;
u64 local_cookie[2];
u64 remote_cookie;
u8 l2_sublayer_present;
};
define sw_if_l2tpv3_tunnel_dump {
u32 client_index;
u32 context;
};
/** \brief L2 fib clear table request, clear all mac entries in the l2 fib
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define l2_fib_clear_table {
u32 client_index;
u32 context;
};
/** \brief L2 fib clear table response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define l2_fib_clear_table_reply {
u32 context;
i32 retval;
};
/** \brief L2 interface ethernet flow point filtering enable/disable request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface to enable/disable filtering on
@param enable_disable - if non-zero enable filtering, else disable
*/
define l2_interface_efp_filter {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 enable_disable;
};
/** \brief L2 interface ethernet flow point filtering response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define l2_interface_efp_filter_reply {
u32 context;
i32 retval;
};
define l2tpv3_interface_enable_disable {
u32 client_index;
u32 context;
u8 enable_disable;
u32 sw_if_index;
};
define l2tpv3_interface_enable_disable_reply {
u32 context;
i32 retval;
};
define l2tpv3_set_lookup_key {
u32 client_index;
u32 context;
/* 0 = ip6 src_address, 1 = ip6 dst_address, 2 = session_id */
u8 key;
};
define l2tpv3_set_lookup_key_reply {
u32 context;
i32 retval;
};
define vxlan_add_del_tunnel {
u32 client_index;
u32 context;
u8 is_add;
u32 src_address;
u32 dst_address;
u32 encap_vrf_id;
u32 decap_next_index;
u32 vni;
};
define vxlan_add_del_tunnel_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
manual_java define vxlan_tunnel_dump {
u32 client_index;
u32 context;
u32 sw_if_index;
};
manual_java define vxlan_tunnel_details {
u32 context;
u32 sw_if_index;
u32 src_address;
u32 dst_address;
u32 encap_vrf_id;
u32 decap_next_index;
u32 vni;
};
/** \brief L2 interface vlan tag rewrite configure request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface the operation is applied to
@param vtr_op - Choose from l2_vtr_op_t enum values
@param push_dot1q - first pushed flag dot1q id set, else dot1ad
@param tag1 - Needed for any push or translate vtr op
@param tag2 - Needed for any push 2 or translate x-2 vtr ops
*/
define l2_interface_vlan_tag_rewrite {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 vtr_op;
u32 push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad
u32 tag1; // first pushed tag
u32 tag2; // second pushed tag
};
/** \brief L2 interface vlan tag rewrite response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define l2_interface_vlan_tag_rewrite_reply {
u32 context;
i32 retval;
};
/** \brief vhost-user interface create request
@param client_index - opaque cookie to identify the sender
@param is_server - our side is socket server
@param sock_filename - unix socket filename, used to speak with frontend
@param use_custom_mac - enable or disable the use of the provided hardware address
@param mac_address - hardware address to use if 'use_custom_mac' is set
*/
define create_vhost_user_if {
u32 client_index;
u32 context;
u8 is_server;
u8 sock_filename[256];
u8 renumber;
u32 custom_dev_instance;
u8 use_custom_mac;
u8 mac_address[6];
};
/** \brief vhost-user interface create response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
@param sw_if_index - interface the operation is applied to
*/
define create_vhost_user_if_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief vhost-user interface modify request
@param client_index - opaque cookie to identify the sender
@param is_server - our side is socket server
@param sock_filename - unix socket filename, used to speak with frontend
*/
define modify_vhost_user_if {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 is_server;
u8 sock_filename[256];
u8 renumber;
u32 custom_dev_instance;
};
/** \brief vhost-user interface modify response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define modify_vhost_user_if_reply {
u32 context;
i32 retval;
};
/** \brief vhost-user interface delete request
@param client_index - opaque cookie to identify the sender
*/
define delete_vhost_user_if {
u32 client_index;
u32 context;
u32 sw_if_index;
};
/** \brief vhost-user interface delete response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define delete_vhost_user_if_reply {
u32 context;
i32 retval;
};
define create_subif {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 sub_id;
/* These fields map directly onto the subif template */
u8 no_tags;
u8 one_tag;
u8 two_tags;
u8 dot1ad; // 0 = dot1q, 1=dot1ad
u8 exact_match;
u8 default_sub;
u8 outer_vlan_id_any;
u8 inner_vlan_id_any;
u16 outer_vlan_id;
u16 inner_vlan_id;
};
define create_subif_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief show version
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define show_version {
u32 client_index;
u32 context;
};
/** \brief show version response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
@param program - name of the program (vpe)
@param version - version of the program
@param build_directory - root of the workspace where the program was built
*/
manual_java define show_version_reply {
u32 context;
i32 retval;
u8 program[32];
u8 version[32];
u8 build_date[32];
u8 build_directory[256];
};
define nsh_gre_add_del_tunnel {
u32 client_index;
u32 context;
u32 src;
u32 dst;
u32 encap_vrf_id;
u32 decap_vrf_id;
u32 decap_next_index;
u8 tlv_len_in_words;
u8 is_add;
u8 ver_o_c;
u8 length;
u8 md_type;
u8 next_protocol;
/* in network byte order */
u32 spi_si;
u32 c1;
u32 c2;
u32 c3;
u32 c4;
u32 tlvs[0];
};
define nsh_gre_add_del_tunnel_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief Vhost-user interface details structure (fix this)
@param sw_if_index - index of the interface
@param interface_name - name of interface
@param virtio_net_hdr_sz - net header size
@param features - interface features
@param is_server - vhost-user server socket
@param sock_filename - socket filename
@param num_regions - number of used memory regions
*/
manual_java define sw_interface_vhost_user_details {
u32 sw_if_index;
u8 interface_name[64];
u32 virtio_net_hdr_sz;
u64 features;
u8 is_server;
u8 sock_filename[256];
u32 num_regions;
i32 sock_errno;
};
/* works */
define sw_interface_vhost_user_dump {
u32 client_index;
u32 context;
};
manual_java define ip_address_details {
u32 client_index;
u32 context;
u8 ip[16];
u8 prefix_length;
};
manual_java define ip_address_dump {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 is_ipv6;
};
manual_java define ip_details {
u32 sw_if_index;
u32 context;
};
define ip_dump {
u32 client_index;
u32 context;
u8 is_ipv6;
};
/** \brief l2 fib table entry structure
@param bd_id - the l2 fib / bridge domain table id
@param mac - the entry's mac address
@param sw_if_index - index of the interface
@param static_mac - the entry is statically configured.
@param filter_mac - the entry is a mac filter entry.
@param bvi_mac - the mac address is a bridge virtual interface
*/
manual_java define l2_fib_table_entry {
u32 bd_id;
u64 mac;
u32 sw_if_index;
u8 static_mac;
u8 filter_mac;
u8 bvi_mac;
};
/** \brief Dump l2 fib (aka bridge domain) table
@param client_index - opaque cookie to identify the sender
@param bd_id - the l2 fib / bridge domain table identifier
*/
manual_java define l2_fib_table_dump {
u32 client_index;
u32 context;
u32 bd_id;
};
define nsh_vxlan_gpe_add_del_tunnel {
u32 client_index;
u32 context;
u32 src;
u32 dst;
u32 encap_vrf_id;
u32 decap_vrf_id;
u32 decap_next_index;
u32 vni;
u8 tlv_len_in_words;
u8 is_add;
u8 ver_o_c;
u8 length;
u8 md_type;
u8 next_protocol;
/* in network byte order */
u32 spi_si;
u32 c1;
u32 c2;
u32 c3;
u32 c4;
u32 tlvs[0];
};
define nsh_vxlan_gpe_add_del_tunnel_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
define lisp_gpe_add_del_tunnel {
u32 client_index;
u32 context;
u32 src;
u32 dst;
u32 encap_vrf_id;
u32 decap_vrf_id;
u32 decap_next_index;
u8 is_add;
u8 flags;
u8 ver_res;
u8 res;
u8 next_protocol;
/* in network byte order */
u32 iid;
};
define lisp_gpe_add_del_tunnel_reply {
u32 context;
i32 retval;
u32 sw_if_index;
};
/** \brief add or delete locator_set
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - locator name
*/
define lisp_add_del_locator_set {
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
};
/** \brief Reply for locator_set add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_locator_set_reply {
u32 context;
i32 retval;
};
/** \brief add or delete locator for locator_set
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param locator_set_name - name of locator_set to add/del locator
@param sw_if_index - index of the interface
@param priority - priority of the lisp locator
@param weight - weight of the lisp locator
*/
define lisp_add_del_locator {
u32 client_index;
u32 context;
u8 is_add;
u8 locator_set_name[64];
u32 sw_if_index;
u8 priority;
u8 weight;
};
/** \brief Reply for locator add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_locator_reply {
u32 context;
i32 retval;
};
/** \brief add or delete lisp eid-table
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
@param prefix_len - prefix len
@param locator_set_name - name of locator_set to add/del eid-table
*/
define lisp_add_del_local_eid {
u32 client_index;
u32 context;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
u8 prefix_len;
u8 locator_set_name[64];
};
/** \brief Reply for local_eid add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_local_eid_reply {
u32 context;
i32 retval;
};
/** \brief add or delete lisp gpe maptunel
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param eid_is_ipv6 - if non-zero the address is ipv6, else ipv4
@param eid_ip_address - array of address bytes
@param eid_prefix_len - prefix len
@param address_is_ipv6 - if non-zero the address is ipv6, else ipv4
@param source_ip_address - array of address bytes
@param destination_ip_address - array of address bytes
*/
define lisp_gpe_add_del_fwd_entry {
u32 client_index;
u32 context;
u8 is_add;
u8 eid_is_ipv6;
u8 eid_ip_address[16];
u8 eid_prefix_len;
u8 address_is_ipv6;
u8 source_ip_address[16];
u8 destination_ip_address[16];
};
/** \brief Reply for gpe_fwd_entry add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_gpe_add_del_fwd_entry_reply {
u32 context;
i32 retval;
};
/** \brief add or delete map-resolver
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
define lisp_add_del_map_resolver {
u32 client_index;
u32 context;
u8 is_add;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Reply for map_resolver add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_add_del_map_resolver_reply {
u32 context;
i32 retval;
};
/** \brief add or delete gpe_iface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add address if non-zero, else delete
*/
define lisp_gpe_add_del_iface {
u32 client_index;
u32 context;
u8 is_add;
};
/** \brief Reply for gpe_iface add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define lisp_gpe_add_del_iface_reply {
u32 context;
i32 retval;
};
/** \brief LISP locator_set status
@param locator_set_name - name of the locator_set
@param sw_if_index - sw_if_index of the locator
@param priority - locator priority
@param weight - locator weight
*/
manual_java define lisp_locator_set_details {
u32 context;
u8 locator_set_name[64];
u32 sw_if_index;
u8 priority;
u8 weight;
};
/** \brief Request for locator_set summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_locator_set_dump {
u32 client_index;
u32 context;
};
/** \brief LISP local eid table status
@param locator_set_name - name of the locator_set
@param eid_is_ipv6 - if non-zero the address is ipv6, else ipv4
@param eid_ip_address - array of address bytes
@param eid_prefix_len - prefix len
*/
manual_java define lisp_local_eid_table_details {
u32 context;
u8 locator_set_name[64];
u8 eid_is_ipv6;
u8 eid_ip_address[16];
u8 eid_prefix_len;
};
/** \brief Request for local eid table summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_local_eid_table_dump {
u32 client_index;
u32 context;
};
manual_java define lisp_gpe_tunnel_details {
u32 context;
u32 tunnels;
u8 is_ipv6;
u8 source_ip[16];
u8 destination_ip[16];
u32 encap_fib_id;
u32 decap_fib_id;
u32 dcap_next;
u8 lisp_ver;
u8 next_protocol;
u8 flags;
u8 ver_res;
u8 res;
u32 iid;
};
/** \brief Request for gpe tunnel summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_gpe_tunnel_dump {
u32 client_index;
u32 context;
};
/** \brief LISP map resolver status
@param locator_set_name - name of the locator_set
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param ip_address - array of address bytes
*/
manual_java define lisp_map_resolver_details {
u32 context;
u8 is_ipv6;
u8 ip_address[16];
};
/** \brief Request for map resolver summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define lisp_map_resolver_dump {
u32 client_index;
u32 context;
};
/* Gross kludge, DGMS */
define interface_name_renumber {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 new_show_dev_instance;
};
define interface_name_renumber_reply {
u32 context;
i32 retval;
};
/** \brief Register for ip4 arp resolution events
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param enable_disable - 1 => register for events, 0 => cancel registration
@param pid - sender's pid
@param address - the exact ip4 address of interest
*/
define want_ip4_arp_events {
u32 client_index;
u32 context;
u8 enable_disable;
u32 pid;
u32 address;
};
/** \brief Reply for interface events registration
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define want_ip4_arp_events_reply {
u32 context;
i32 retval;
};
/** \brief Tell client about an ip4 arp resolution event
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param address - the exact ip4 address of interest
@param pid - client pid registered to receive notification
@param sw_if_index - interface which received ARP packet
@param new_mac - the new mac address
*/
define ip4_arp_event {
u32 client_index;
u32 context;
u32 address;
u32 pid;
u32 sw_if_index;
u8 new_mac[6];
};
/** \brief L2 bridge domain add or delete request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param bd_id - the bridge domain to create
@param flood - enable/disable bcast/mcast flooding in the bd
@param uu_flood - enable/disable uknown unicast flood in the bd
@param forward - enable/disable forwarding on all interfaces in the bd
@param learn - enable/disable learning on all interfaces in the bd
@param arp_term - enable/disable arp termination in the bd
@param is_add - add or delete flag
*/
define bridge_domain_add_del {
u32 client_index;
u32 context;
u32 bd_id;
u8 flood;
u8 uu_flood;
u8 forward;
u8 learn;
u8 arp_term;
u8 is_add;
};
/** \brief L2 bridge domain add or delete response
@param context - sender context, to match reply w/ request
@param retval - return code for the set bridge flags request
*/
define bridge_domain_add_del_reply {
u32 context;
u32 retval;
};
/** \brief L2 bridge domain request operational state details
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param bd_id - the bridge domain id desired or ~0 to request all bds
*/
manual_java define bridge_domain_dump {
u32 client_index;
u32 context;
u32 bd_id;
};
/** \brief L2 bridge domain operational state response
@param bd_id - the bridge domain id
@param flood - bcast/mcast flooding state on all interfaces in the bd
@param uu_flood - uknown unicast flooding state on all interfaces in the bd
@param forward - forwarding state on all interfaces in the bd
@param learn - learning state on all interfaces in the bd
@param arp_term - arp termination state on all interfaces in the bd
@param n_sw_ifs - number of sw_if_index's in the domain
*/
manual_java define bridge_domain_details {
u32 context;
u32 bd_id;
u8 flood;
u8 uu_flood;
u8 forward;
u8 learn;
u8 arp_term;
u32 bvi_sw_if_index;
u32 n_sw_ifs;
};
/** \brief L2 bridge domain sw interface operational state response
@param bd_id - the bridge domain id
@param sw_if_index - sw_if_index in the domain
@param shg - split horizon group for the interface
*/
manual_java define bridge_domain_sw_if_details {
u32 context;
u32 bd_id;
u32 sw_if_index;
u8 shg;
};
/** \brief DHCP Client config add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of the interface for DHCP client
@param hostname - hostname
@param is_add - add the config if non-zero, else delete
@param want_dhcp_event - DHCP event sent to the sender
via dhcp_compl_event API message if non-zero
@param pid - sender's pid
*/
define dhcp_client_config {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 hostname[64];
u8 is_add;
u8 want_dhcp_event;
u32 pid;
};
/** \brief DHCP Client config response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define dhcp_client_config_reply {
u32 context;
i32 retval;
};
/** \brief Set/unset input ACL interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface to set/unset input ACL
@param ip4_table_index - ip4 classify table index (~0 for skip)
@param ip6_table_index - ip6 classify table index (~0 for skip)
@param l2_table_index - l2 classify table index (~0 for skip)
@param is_add - Set input ACL if non-zero, else unset
Note: User is recommeneded to use just one valid table_index per call.
(ip4_table_index, ip6_table_index, or l2_table_index)
*/
define input_acl_set_interface {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 ip4_table_index;
u32 ip6_table_index;
u32 l2_table_index;
u8 is_add;
};
/** \brief Set/unset input ACL interface response
@param context - sender context, to match reply w/ request
@param retval - return code for the request
*/
define input_acl_set_interface_reply {
u32 context;
i32 retval;
};
/** \brief IPsec: Add/delete Security Policy Database
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add SPD if non-zero, else delete
@param spd_id - SPD instance id (control plane allocated)
*/
define ipsec_spd_add_del {
u32 client_index;
u32 context;
u8 is_add;
u32 spd_id;
};
/** \brief Reply for IPsec: Add/delete Security Policy Database entry
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ipsec_spd_add_del_reply {
u32 context;
i32 retval;
};
/** \brief IPsec: Add/delete SPD from interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add security mode if non-zero, else delete
@param sw_if_index - index of the interface
@param spd_id - SPD instance id to use for lookups
*/
define ipsec_interface_add_del_spd {
u32 client_index;
u32 context;
u8 is_add;
u32 sw_if_index;
u32 spd_id;
};
/** \brief Reply for IPsec: Add/delete SPD from interface
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ipsec_interface_add_del_spd_reply {
u32 context;
i32 retval;
};
/** \brief IPsec: Add/delete Security Policy Database entry
See RFC 4301, 4.4.1.1 on how to match packet to selectors
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add SPD if non-zero, else delete
@param spd_id - SPD instance id (control plane allocated)
@param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower
@param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic
@param is_ipv6 - remote/local address are IPv6 if non-zero, else IPv4
@param remote_address_start - start of remote address range to match
@param remote_address_stop - end of remote address range to match
@param local_address_start - start of local address range to match
@param local_address_stop - end of local address range to match
@param protocol - protocol type to match [0 means any]
@param remote_port_start - start of remote port range to match ...
@param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
@param local_port_start - start of local port range to match ...
@param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
@param policy - 0 = bypass (no IPsec processing), 1 = discard (discard packet with ICMP processing), 2 = resolve (send request to control plane for SA resolving, and discard without ICMP processing), 3 = protect (apply IPsec policy using following parameters)
@param sa_id - SAD instance id (control plane allocated)
*/
define ipsec_spd_add_del_entry {
u32 client_index;
u32 context;
u8 is_add;
u32 spd_id;
i32 priority;
u8 is_outbound;
// Selector
u8 is_ipv6;
u8 is_ip_any;
u8 remote_address_start[16];
u8 remote_address_stop[16];
u8 local_address_start[16];
u8 local_address_stop[16];
u8 protocol;
u16 remote_port_start;
u16 remote_port_stop;
u16 local_port_start;
u16 local_port_stop;
// Policy
u8 policy;
u32 sa_id;
};
/** \brief Reply for IPsec: Add/delete Security Policy Database entry
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ipsec_spd_add_del_entry_reply {
u32 context;
i32 retval;
};
/** \brief IPsec: Add/delete Security Association Database entry
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param is_add - add SAD entry if non-zero, else delete
@param sad_id - sad id
@param spi - security parameter index
@param protocol - 0 = AH, 1 = ESP
@param crypto_algorithm - 0 = Null, 1 = AES-CBC-128, 2 = AES-CBC-192, 3 = AES-CBC-256, 4 = 3DES-CBC
@param crypto_key_length - length of crypto_key in bytes
@param crypto_key - crypto keying material
@param integrity_algorithm - 0 = None, 1 = MD5-96, 2 = SHA1-96, 3 = SHA-256, 4 = SHA-384, 5=SHA-512
@param integrity_key_length - length of integrity_key in bytes
@param integrity_key - integrity keying material
@param use_extended_sequence_number - use ESN when non-zero
@param is_tunnel - IPsec tunnel mode if non-zero, else transport mode
@param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero
@param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
@param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
To be added:
Anti-replay
IPsec tunnel address copy mode (to support GDOI)
*/
define ipsec_sad_add_del_entry {
u32 client_index;
u32 context;
u8 is_add;
u32 sad_id;
u32 spi;
u8 protocol;
u8 crypto_algorithm;
u8 crypto_key_length;
u8 crypto_key[128];
u8 integrity_algorithm;
u8 integrity_key_length;
u8 integrity_key[128];
u8 use_extended_sequence_number;
u8 is_tunnel;
u8 is_tunnel_ipv6;
u8 tunnel_src_address[16];
u8 tunnel_dst_address[16];
};
/** \brief Reply for IPsec: Add/delete Security Association Database entry
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ipsec_sad_add_del_entry_reply {
u32 context;
i32 retval;
};
/** \brief IPsec: Update Security Association keys
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sa_id - sa id
@param crypto_key_length - length of crypto_key in bytes
@param crypto_key - crypto keying material
@param integrity_key_length - length of integrity_key in bytes
@param integrity_key - integrity keying material
*/
define ipsec_sa_set_key {
u32 client_index;
u32 context;
u32 sa_id;
u8 crypto_key_length;
u8 crypto_key[128];
u8 integrity_key_length;
u8 integrity_key[128];
};
/** \brief Reply for IPsec: Update Security Association keys
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ipsec_sa_set_key_reply {
u32 context;
i32 retval;
};
/** \brief IKEv2: Add/delete profile
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param name - IKEv2 profile name
@param is_add - Add IKEv2 profile if non-zero, else delete
*/
define ikev2_profile_add_del {
u32 client_index;
u32 context;
u8 name[64];
u8 is_add;
};
/** \brief Reply for IKEv2: Add/delete profile
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ikev2_profile_add_del_reply {
u32 context;
i32 retval;
};
/** \brief IKEv2: Set IKEv2 profile authentication method
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param name - IKEv2 profile name
@param auth_method - IKEv2 authentication method (shared-key-mic/rsa-sig)
@param is_hex - Authentication data in hex format if non-zero, else string
@param data_len - Authentication data length
@param data - Authentication data (for rsa-sig cert file path)
*/
define ikev2_profile_set_auth {
u32 client_index;
u32 context;
u8 name[64];
u8 auth_method;
u8 is_hex;
u32 data_len;
u8 data[0];
};
/** \brief Reply for IKEv2: Set IKEv2 profile authentication method
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ikev2_profile_set_auth_reply {
u32 context;
i32 retval;
};
/** \brief IKEv2: Set IKEv2 profile local/remote identification
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param name - IKEv2 profile name
@param is_local - Identification is local if non-zero, else remote
@param id_type - Identification type
@param data_len - Identification data length
@param data - Identification data
*/
define ikev2_profile_set_id {
u32 client_index;
u32 context;
u8 name[64];
u8 is_local;
u8 id_type;
u32 data_len;
u8 data[0];
};
/** \brief Reply for IKEv2:
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ikev2_profile_set_id_reply {
u32 context;
i32 retval;
};
/** \brief IKEv2: Set IKEv2 profile traffic selector parameters
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param name - IKEv2 profile name
@param is_local - Traffic selector is local if non-zero, else remote
@param proto - Traffic selector IP protocol (if zero not relevant)
@param start_port - The smallest port number allowed by traffic selector
@param end_port - The largest port number allowed by traffic selector
@param start_addr - The smallest address included in traffic selector
@param end_addr - The largest address included in traffic selector
*/
define ikev2_profile_set_ts {
u32 client_index;
u32 context;
u8 name[64];
u8 is_local;
u8 proto;
u16 start_port;
u16 end_port;
u32 start_addr;
u32 end_addr;
};
/** \brief Reply for IKEv2: Set IKEv2 profile traffic selector parameters
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ikev2_profile_set_ts_reply {
u32 context;
i32 retval;
};
/** \brief IKEv2: Set IKEv2 local RSA private key
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param key_file - Key file absolute path
*/
define ikev2_set_local_key {
u32 client_index;
u32 context;
u8 key_file[256];
};
/** \brief Reply for IKEv2: Set IKEv2 local key
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define ikev2_set_local_key_reply {
u32 context;
i32 retval;
};
/** \brief Tell client about a DHCP completion event
@param client_index - opaque cookie to identify the sender
@param pid - client pid registered to receive notification
@param is_ipv6 - if non-zero the address is ipv6, else ipv4
@param host_address - Host IP address
@param router_address - Router IP address
@param host_mac - Host MAC address
*/
manual_java define dhcp_compl_event {
u32 client_index;
u32 pid;
u8 hostname[64];
u8 is_ipv6;
u8 host_address[16];
u8 router_address[16];
u8 host_mac[6];
};
/** \brief Add MAP domains
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param ip6_prefix - Rule IPv6 prefix
@param ip4_prefix - Rule IPv4 prefix
@param ip6_src - MAP domain IPv6 BR address / Tunnel source
@param ip6_prefix_len - Rule IPv6 prefix length
@param ip4_prefix_len - Rule IPv4 prefix length
@param ea_bits_len - Embedded Address bits length
@param psid_offset - Port Set Identifider (PSID) offset
@param psid_length - PSID length
@param is_translation - MAP-E / MAP-T
@param mtu - MTU
*/
define map_add_domain {
u32 client_index;
u32 context;
u8 ip6_prefix[16];
u8 ip4_prefix[4];
u8 ip6_src[16];
u8 ip6_prefix_len;
u8 ip4_prefix_len;
u8 ip6_src_prefix_len;
u8 ea_bits_len;
u8 psid_offset;
u8 psid_length;
u8 is_translation;
u16 mtu;
};
/** \brief Reply for MAP domain add
@param context - returned sender context, to match reply w/ request
@param index - MAP domain index
@param retval - return code
*/
define map_add_domain_reply {
u32 context;
u32 index;
i32 retval;
};
/** \brief Delete MAP domain
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param index - MAP Domain index
*/
define map_del_domain {
u32 client_index;
u32 context;
u32 index;
};
/** \brief Reply for MAP domain del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define map_del_domain_reply {
u32 context;
i32 retval;
};
/** \brief Add or Delete MAP rule from a domain (Only used for shared IPv4 per subscriber)
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param index - MAP Domain index
@param is_add - If 1 add rule, if 0 delete rule
@param ip6_dst - MAP CE IPv6 address
@param psid - Rule PSID
*/
define map_add_del_rule {
u32 client_index;
u32 context;
u32 index;
u32 is_add;
u8 ip6_dst[16];
u16 psid;
};
/** \brief Reply for MAP rule add/del
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define map_add_del_rule_reply {
u32 context;
i32 retval;
};
/** \brief Get list of map domains
@param client_index - opaque cookie to identify the sender
*/
define map_domain_dump {
u32 client_index;
u32 context;
};
manual_java define map_domain_details {
u32 domain_index;
u8 ip6_prefix[16];
u8 ip4_prefix[4];
u8 ip6_src[16];
u8 ip6_prefix_len;
u8 ip4_prefix_len;
u8 ip6_src_len;
u8 ea_bits_len;
u8 psid_offset;
u8 psid_length;
u8 flags;
u16 mtu;
u8 is_translation;
};
define map_rule_dump {
u32 client_index;
u32 context;
u32 domain_index;
};
manual_java define map_rule_details {
u8 ip6_dst[16];
u16 psid;
};
/** \brief Request for a single block of summary stats
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define map_summary_stats {
u32 client_index;
u32 context;
};
/** \brief Reply for map_summary_stats request
@param context - sender context, to match reply w/ request
@param retval - return code for request
@param total_bindings -
@param total_pkts -
@param total_ip4_fragments -
@param total_security_check -
*/
define map_summary_stats_reply {
u32 context;
i32 retval;
u64 total_bindings;
u64 total_pkts[2];
u64 total_bytes[2];
u64 total_ip4_fragments;
u64 total_security_check[2];
};
/** \brief cop: enable/disable junk filtration features on an interface
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_inded - desired interface
@param enable_disable - 1 => enable, 0 => disable
*/
define cop_interface_enable_disable {
u32 client_index;
u32 context;
u32 sw_if_index;
u8 enable_disable;
};
/** \brief cop: interface enable/disable junk filtration reply
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define cop_interface_enable_disable_reply {
u32 context;
i32 retval;
};
/** \brief cop: enable/disable whitelist filtration features on an interface
Note: the supplied fib_id must match in order to remove the feature!
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - interface handle, physical interfaces only
@param fib_id - fib identifier for the whitelist / blacklist fib
@param ip4 - 1 => enable ip4 filtration, 0=> disable ip4 filtration
@param ip6 - 1 => enable ip6 filtration, 0=> disable ip6 filtration
@param default_cop - 1 => enable non-ip4, non-ip6 filtration 0=> disable it
*/
define cop_whitelist_enable_disable {
u32 client_index;
u32 context;
u32 sw_if_index;
u32 fib_id;
u8 ip4;
u8 ip6;
u8 default_cop;
};
/** \brief cop: interface enable/disable junk filtration reply
@param context - returned sender context, to match reply w/ request
@param retval - return code
*/
define cop_whitelist_enable_disable_reply {
u32 context;
i32 retval;
};
/** \brief get_node_graph - get a copy of the vpp node graph
including the current set of graph arcs.
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
define get_node_graph {
u32 client_index;
u32 context;
};
/** \brief get_node_graph_reply
@param context - returned sender context, to match reply w/ request
@param retval - return code
@param reply_in_shmem - result from vlib_node_serialize, in shared
memory. Process with vlib_node_unserialize, remember to switch
heaps and free the result.
*/
define get_node_graph_reply {
u32 context;
i32 retval;
u64 reply_in_shmem;
};
/** \brief Clear interface statistics
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param sw_if_index - index of the interface to clear statistics
*/
define sw_interface_clear_stats {
u32 client_index;
u32 context;
u32 sw_if_index;
};
/** \brief Reply to sw_interface_clear_stats
@param context - sender context which was passed in the request
@param retval - return code of the set flags request
*/
define sw_interface_clear_stats_reply {
u32 context;
i32 retval;
};
/** \brief IOAM Trace : Set TRACE profile
@param id - profile id
@param trace_type - Trace type
@param trace_num_elt - Number of nodes in trace path
@param trace_ppc - Trace PPC (none/encap/decap)
@param trace_tsp - Trace timestamp precision (0-sec,1-ms,2-us,3-ns)
@param trace_app_data - Trace application data, can be any 4 bytes
@param pow_enable - Proof of Work enabled or not flag
@param node_id - Id of this node
*/
define trace_profile_add {
u32 client_index;
u32 context;
u16 id;
u8 trace_type;
u8 trace_num_elt;
u8 trace_ppc;
u8 trace_tsp;
u32 trace_app_data;
u8 pow_enable;
u32 node_id;
};
/** \brief Trace profile add / del response
@param context - sender context, to match reply w/ request
@param retval - return value for request
*/
define trace_profile_add_reply {
u32 context;
i32 retval;
};
/** \brief IOAM Trace enable trace profile for a flow
@param id - id of the trace profile to be applied
@param dest_ipv6 - Destination IPv6 address
@param prefix_length - prefix mask
@param vrf_id - VRF ID
@param trace_op - Trace operation (add/mod/del)
@param enable - apply/remove the trace profile for the flow
*/
define trace_profile_apply {
u32 client_index;
u32 context;
u16 id;
u8 dest_ipv6[16];
u32 prefix_length;
u32 vrf_id;
u8 trace_op;
u8 enable;
};
/** \brief Trace profile apply response
@param context - sender context, to match reply w/ request
@param retval - return value for request
*/
define trace_profile_apply_reply {
u32 context;
i32 retval;
};
/** \brief Delete Trace Profile
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param index - MAP Domain index
*/
define trace_profile_del {
u32 client_index;
u32 context;
u16 id;
};
/** \brief Trace profile add / del response
@param context - sender context, to match reply w/ request
@param retval - return value for request
*/
define trace_profile_del_reply {
u32 context;
i32 retval;
};