flat ! ! Last configuration change at 14:27:32 UTC Fri Mar 27 2015 ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname iosv-1 ! boot-start-marker boot-end-marker ! ! enable password cisco ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! cts logging verbose ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 192.168.0.2 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management ip address 172.16.1.167 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 description to vpp-1 ip address 10.0.0.5 255.255.255.252 ip ospf cost 1 duplex auto speed auto media-type rj45 ! router ospf 1 passive-interface Loopback0 network 10.0.0.4 0.0.0.3 area 0 network 192.168.0.2 0.0.0.0 area 0 ! router bgp 1 bgp router-id 192.168.0.2 bgp log-neighbor-changes neighbor 192.168.0.3 remote-as 1 neighbor 192.168.0.3 description iBGP peer iosv-2 neighbor 192.168.0.3 update-source Loopback0 ! address-family ipv4 network 192.168.0.2 mask 255.255.255.255 neighbor 192.168.0.3 activate exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 10.0.0.9 255.255.255.255 10.0.0.6 ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! no scheduler allocate ! end ! ! Last configuration change at 14:26:58 UTC Fri Mar 27 2015 ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname iosv-2 ! boot-start-marker boot-end-marker ! ! enable password cisco ! no aaa new-model ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! cts logging verbose ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 192.168.0.3 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management ip address 172.16.1.164 255.255.255.0 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 description to vpp-1 ip address 10.0.0.9 255.255.255.252 ip ospf cost 1 duplex auto speed auto media-type rj45 ! router ospf 1 passive-interface Loopback0 network 10.0.0.8 0.0.0.3 area 0 network 192.168.0.3 0.0.0.0 area 0 ! router bgp 1 bgp router-id 192.168.0.3 bgp log-neighbor-changes neighbor 192.168.0.2 remote-as 1 neighbor 192.168.0.2 description iBGP peer iosv-1 neighbor 192.168.0.2 update-source Loopback0 ! address-family ipv4 network 192.168.0.3 mask 255.255.255.255 neighbor 192.168.0.2 activate exit-address-family ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 10.0.0.5 255.255.255.255 10.0.0.10 ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! no scheduler allocate ! end #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: vpp-1 manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart - sed -i 's/no-pci//' /cisco/etc/qn.conf - sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf users: - default - gecos: User configured by VIRL Configuration Engine 0.15.3 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /cisco/etc/vpp-server.conf owner: root:root permissions: '0644' content: |- set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 set interface state GigabitEthernet0/4/0 up set interface ip address GigabitEthernet0/5/0 10.0.0.10/30 set interface state GigabitEthernet0/5/0 up