/* Hey Emacs use -*- mode: C -*- */ /* * Copyright (c) 2015 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** \file This file defines vpe control-plane API messages which are generally called through a shared memory interface. */ /** \brief Register for interface events @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param enable_disable - 1 => register for events, 0 => cancel registration @param pid - sender's pid */ define want_interface_events { u32 client_index; u32 context; u32 enable_disable; u32 pid; }; /** \brief Reply for interface events registration @param context - returned sender context, to match reply w/ request @param retval - return code */ define want_interface_events_reply { u32 context; i32 retval; }; /** \brief Interface details structure (fix this) @param sw_if_index - index of the interface @param sup_sw_if_index - index of parent interface if any, else same as sw_if_index @param l2_address_length - length of the interface's l2 address @param pid - the interface's l2 address @param interface_name - name of the interface @param link_duplex - 1 if half duplex, 2 if full duplex @param link_speed - 1 = 10M, 2 = 100M, 4 = 1G, 8 = 10G, 16 = 40G, 32 = 100G @param link_MTU - max. transmittion unit @param sub_if_id - A number 0-N to uniquely identify this subif on super if @param sub_dot1ad - 0 = dot1q, 1=dot1ad @param sub_number_of_tags - Number of tags (0 - 2) @param sub_outer_vlan_id @param sub_inner_vlan_id @param sub_exact_match @param sub_default @param sub_outer_vlan_id_any @param sub_inner_vlan_id_any @param vtr_op - vlan tag rewrite operation @param vtr_push_dot1q @param vtr_tag1 @param vtr_tag2 */ define sw_interface_details { u32 context; u32 sw_if_index; /* index of sup interface (e.g. hw interface). equal to sw_if_index for super hw interface. */ u32 sup_sw_if_index; /* Layer 2 address, if applicable */ u32 l2_address_length; u8 l2_address[8]; /* Interface name */ u8 interface_name[64]; /* 1 = up, 0 = down */ u8 admin_up_down; u8 link_up_down; /* 1 = half duplex, 2 = full duplex */ u8 link_duplex; /* 1 = 10M, 2 = 100M, 4 = 1G, 8 = 10G, 16 = 40G, 32 = 100G */ u8 link_speed; /* MTU */ u16 link_mtu; /* Subinterface ID. A number 0-N to uniquely identify this subinterface under the super interface*/ u32 sub_id; /* 0 = dot1q, 1=dot1ad */ u8 sub_dot1ad; /* Number of tags 0-2 */ u8 sub_number_of_tags; u16 sub_outer_vlan_id; u16 sub_inner_vlan_id; u8 sub_exact_match; u8 sub_default; u8 sub_outer_vlan_id_any; u8 sub_inner_vlan_id_any; /* vlan tag rewrite state */ u32 vtr_op; u32 vtr_push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad u32 vtr_tag1; // first pushed tag u32 vtr_tag2; // second pushed tag }; /** \brief Set flags on the interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - index of the interface to set flags on @param admin_up_down - set the admin state, 1 = up, 0 = down @param link_up_down - Oper state sent on change event, not used in config. @param deleted - interface was deleted */ define sw_interface_set_flags { u32 client_index; u32 context; u32 sw_if_index; /* 1 = up, 0 = down */ u8 admin_up_down; u8 link_up_down; u8 deleted; }; /** \brief Reply to sw_interface_set_flags @param context - sender context which was passed in the request @param retval - return code of the set flags request */ define sw_interface_set_flags_reply { u32 context; i32 retval; }; /* works */ define sw_interface_dump { u32 client_index; u32 context; u8 name_filter_valid; u8 name_filter[49]; }; /** \brief Set or delete one or all ip addresses on a specified interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - index of the interface to add/del addresses @param is_add - add address if non-zero, else delete @param is_ipv6 - if non-zero the address is ipv6, else ipv4 @param del_all - if non-zero delete all addresses on the interface @param address_length - address length in bytes, 4 for ip4, 16 for ip6 @param address - array of address bytes */ define sw_interface_add_del_address { u32 client_index; u32 context; u32 sw_if_index; u8 is_add; u8 is_ipv6; u8 del_all; u8 address_length; u8 address[16]; }; /** \brief Reply for interface events registration @param context - returned sender context, to match reply w/ request @param retval - return code */ define sw_interface_add_del_address_reply { u32 context; i32 retval; }; /** \brief Associate the specified interface with a fib table @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - index of the interface @param is_ipv6 - if non-zero ipv6, else ipv4 @param vrf_id - fib table/vrd id to associate the interface with */ define sw_interface_set_table { u32 client_index; u32 context; u32 sw_if_index; u8 is_ipv6; u32 vrf_id; }; /** \brief Reply for interface events registration @param context - returned sender context, to match reply w/ request @param retval - return code */ define sw_interface_set_table_reply { u32 context; i32 retval; }; /** \brief Initialize a new tap interface with the given paramters @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param use_random_mac - let the system generate a unique mac address @param tap_name - name to associate with the new interface @param mac_address - mac addr to assign to the interface if use_radom not set */ define tap_connect { u32 client_index; u32 context; u8 use_random_mac; u8 tap_name [64]; u8 mac_address[6]; u8 renumber; u32 custom_dev_instance; }; /** \brief Reply for tap connect request @param context - returned sender context, to match reply w/ request @param retval - return code @param sw_if_index - software index allocated for the new tap interface */ define tap_connect_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief Modify a tap interface with the given paramters @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface index of existing tap interface @param use_random_mac - let the system generate a unique mac address @param tap_name - name to associate with the new interface @param mac_address - mac addr to assign to the interface if use_radom not set */ define tap_modify { u32 client_index; u32 context; u32 sw_if_index; u8 use_random_mac; u8 tap_name [64]; u8 mac_address[6]; u8 renumber; u32 custom_dev_instance; }; /** \brief Reply for tap modify request @param context - returned sender context, to match reply w/ request @param retval - return code @param sw_if_index - software index if the modified tap interface */ define tap_modify_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief Delete tap interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface index of existing tap interface */ define tap_delete { u32 client_index; u32 context; u32 sw_if_index; }; /** \brief Reply for tap delete request @param context - returned sender context, to match reply w/ request @param retval - return code */ define tap_delete_reply { u32 context; i32 retval; }; /** \brief Dump tap interfaces request */ define sw_interface_tap_dump { u32 client_index; u32 context; }; /** \brief Reply for tap dump request @param sw_if_index - software index of tap interface @param dev_name - Linux tap device name */ define sw_interface_tap_details { u32 context; u32 sw_if_index; u8 dev_name[64]; }; /** \brief Create a new subinterface with the given vlan id @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - software index of the new vlan's parent interface @param vlan_id - vlan tag of the new interface */ define create_vlan_subif { u32 client_index; u32 context; u32 sw_if_index; u32 vlan_id; }; /** \brief Reply for the vlan subinterface create request @param context - returned sender context, to match reply w/ request @param retval - return code @param sw_if_index - software index allocated for the new subinterface */ define create_vlan_subif_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief Add / del route request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - software index of the new vlan's parent interface @param vrf_id - fib table /vrf associated with the route @param lookup_in_vrf - @param resolve_attempts - @param classify_table_index - @param create_vrf_if_needed - @param resolve_if_needed - @param is_add - 1 if adding the route, 0 if deleting @param is_drop - @param is_ipv6 - 0 if an ip4 route, else ip6 @param is_local - @param is_classify - @param is_multipath - Set to 1 if this is a multipath route, else 0 @param not_last - Is last or not last msg in group of multiple add/del msgs @param next_hop_weight - @param dst_address_length - @param dst_address[16] - @param next_hop_address[16] - */ define ip_add_del_route { u32 client_index; u32 context; u32 next_hop_sw_if_index; u32 vrf_id; u32 lookup_in_vrf; u32 resolve_attempts; u32 classify_table_index; u8 create_vrf_if_needed; u8 resolve_if_needed; u8 is_add; u8 is_drop; u8 is_ipv6; u8 is_local; u8 is_classify; /* Is last/not-last message in group of multiple add/del messages. */ u8 is_multipath; u8 not_last; u8 next_hop_weight; u8 dst_address_length; u8 dst_address[16]; u8 next_hop_address[16]; }; /** \brief Reply for add / del route request @param context - returned sender context, to match reply w/ request @param retval - return code */ define ip_add_del_route_reply { u32 context; i32 retval; }; /* works */ /** \brief Add / del gre tunnel request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - software index of the new vlan's parent interface @param inner_vrf_id - @param outer_vrf_id - @param is_add - 1 if adding the tunnel, 0 if deleting @param src_address[4] - tunnel source address @param dst_address[4] - tunnel destination address @param intf_address - @param intf_address_length - */ define mpls_gre_add_del_tunnel { u32 client_index; u32 context; u32 inner_vrf_id; u32 outer_vrf_id; u8 is_add; u8 l2_only; u8 src_address[4]; u8 dst_address[4]; u8 intfc_address[4]; u8 intfc_address_length; }; /** \brief Reply for add / del tunnel request @param context - returned sender context, to match reply w/ request @param retval - return code */ define mpls_gre_add_del_tunnel_reply { u32 context; i32 retval; u32 tunnel_sw_if_index; }; /** \brief Add / del MPLS encapsulation request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf id @param dst_address[4] - @param is_add - 1 if adding the encap, 0 if deleting @param nlabels - number of labels @param labels - array of labels */ define mpls_add_del_encap { u32 client_index; u32 context; u32 vrf_id; u8 dst_address[4]; /* 1 = add, 0 = delete */ u8 is_add; u8 nlabels; u32 labels[0]; }; /** \brief Reply for add / del encapsulation request @param context - returned sender context, to match reply w/ request @param retval - return code */ define mpls_add_del_encap_reply { u32 context; i32 retval; }; /** \brief Add / del MPLS decapsulation request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param rx_vrf_id - receive vrf @param tx_vrf_id - transmit vrf @param label - @param next_index - @param s_bit - @param is_add - 1 if adding the encap, 0 if deleting */ define mpls_add_del_decap { u32 client_index; u32 context; u32 rx_vrf_id; u32 tx_vrf_id; u32 label; u32 next_index; u8 s_bit; u8 is_add; }; /** \brief Reply for MPLS decap add / del request @param context - returned sender context, to match reply w/ request @param retval - return code */ define mpls_add_del_decap_reply { u32 context; i32 retval; }; /** \brief Proxy ARP add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - VRF / Fib table ID @param is_add - 1 if adding the Proxy ARP range, 0 if deleting @param low_address[4] - Low address of the Proxy ARP range @param hi_address[4] - High address of the Proxy ARP range */ define proxy_arp_add_del { u32 client_index; u32 context; u32 vrf_id; u8 is_add; u8 low_address[4]; u8 hi_address[4]; }; /** \brief Reply for proxy arp add / del request @param context - returned sender context, to match reply w/ request @param retval - return code */ define proxy_arp_add_del_reply { u32 context; i32 retval; }; /** \brief Proxy ARP add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - Which interface to enable / disable Proxy Arp on @param enable_disable - 1 to enable Proxy ARP on interface, 0 to disable */ define proxy_arp_intfc_enable_disable { u32 client_index; u32 context; u32 sw_if_index; /* 1 = on, 0 = off */ u8 enable_disable; }; /** \brief Reply for Proxy ARP interface enable / disable request @param context - returned sender context, to match reply w/ request @param retval - return code */ define proxy_arp_intfc_enable_disable_reply { u32 context; i32 retval; }; /** \brief IP neighbor add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf_id, only for IP4 @param sw_if_index - interface used to reach neighbor @param is_add - 1 to add neighbor, 0 to delete @param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4 @param is_static - @param mac_address - l2 address of the neighbor @param dst_address - ip4 or ip6 address of the neighbor */ define ip_neighbor_add_del { u32 client_index; u32 context; u32 vrf_id; /* only makes sense for ip4 */ u32 sw_if_index; /* 1 = add, 0 = delete */ u8 is_add; u8 is_ipv6; u8 is_static; u8 mac_address[6]; u8 dst_address[16]; }; /** \brief Reply for IP Neighbor add / delete request @param context - returned sender context, to match reply w/ request @param retval - return code */ define ip_neighbor_add_del_reply { u32 context; i32 retval; }; /** \brief Reset VRF (remove all routes etc) request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_ipv6 - 1 for IPv6 neighbor, 0 for IPv4 @param vrf_id - ID of th FIB table / VRF to reset */ define reset_vrf { u32 client_index; u32 context; u8 is_ipv6; u32 vrf_id; }; /** \brief Reply for Reset VRF request @param context - returned sender context, to match reply w/ request @param retval - return code */ define reset_vrf_reply { u32 context; i32 retval; }; /** \brief Is Address Reachable request - DISABLED @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param next_hop_sw_if_index - index of interface used to get to next hop @param is_ipv6 - 1 for IPv6, 0 for IPv4 @param is_error - address not found or does not match intf @param address[] - Address in question */ define is_address_reachable { u32 client_index; /* (api_main_t *) am->my_client_index */ u32 context; u32 next_hop_sw_if_index; u8 is_known; /* on reply, this is the answer */ u8 is_ipv6; u8 is_error; /* address not found or does not match intf */ u8 address[16]; }; /** \brief Want Stats, register for stats updates @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param enable_disable - 1 = enable stats, 0 = disable @param pid - pid of process requesting stats updates */ define want_stats { u32 client_index; u32 context; u32 enable_disable; u32 pid; }; /** \brief Reply for Want Stats request @param context - returned sender context, to match reply w/ request @param retval - return code */ define want_stats_reply { u32 context; i32 retval; }; /** \brief Want stats counters structure @param vnet_counter_type- such as ip4, ip6, punts, etc @param is_combined - rx & tx total (all types) counts @param first_sw_if_index - first sw index in block of index, counts @param count - number of interfaces this stats block includes counters for @param data - contiguous block of vlib_counter_t structures */ define vnet_interface_counters { /* enums - plural - in vnet/interface.h */ u8 vnet_counter_type; u8 is_combined; u32 first_sw_if_index; u32 count; u8 data[0]; }; typeonly manual_print manual_endian define ip4_fib_counter { u32 address; u8 address_length; u64 packets; u64 bytes; }; manual_print manual_endian define vnet_ip4_fib_counters { u32 vrf_id; u32 count; vl_api_ip4_fib_counter_t c[count]; }; typeonly manual_print manual_endian define ip6_fib_counter { u64 address[2]; u8 address_length; u64 packets; u64 bytes; }; manual_print manual_endian define vnet_ip6_fib_counters { u32 vrf_id; u32 count; vl_api_ip6_fib_counter_t c[count]; }; /** \brief Request for a single block of summary stats @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define vnet_get_summary_stats { u32 client_index; u32 context; }; /** \brief Reply for vnet_get_summary_stats request @param context - sender context, to match reply w/ request @param retval - return code for request @param total_pkts - @param total_bytes - @param vector_rate - */ define vnet_summary_stats_reply { u32 context; i32 retval; u64 total_pkts[2]; u64 total_bytes[2]; f64 vector_rate; }; /** \brief OAM event structure @param dst_address[] - @param state */ define oam_event { u8 dst_address[4]; u8 state; }; /** \brief Want OAM events request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param enable_disable- enable if non-zero, else disable @param pid - pid of the requesting process */ define want_oam_events { u32 client_index; u32 context; u32 enable_disable; u32 pid; }; /** \brief Want OAM events response @param context - sender context, to match reply w/ request @param retval - return code for the want oam stats request */ define want_oam_events_reply { u32 context; i32 retval; }; /** \brief OAM add / del target request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf_id of the target @param src_address[] - source address to use for the updates @param dst_address[] - destination address of the target @param is_add - add target if non-zero, else delete */ define oam_add_del { u32 client_index; u32 context; u32 vrf_id; u8 src_address[4]; u8 dst_address[4]; u8 is_add; }; /** \brief OAM add / del target response @param context - sender context, to match reply w/ request @param retval - return code of the request */ define oam_add_del_reply { u32 context; i32 retval; }; /** \brief Reset fib table request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf/table id of the fib table to reset @param is_ipv6 - an ipv6 fib to reset if non-zero, else ipv4 */ define reset_fib { u32 client_index; u32 context; u32 vrf_id; u8 is_ipv6; }; /** \brief Reset fib response @param context - sender context, to match reply w/ request @param retval - return code for the reset bfib request */ define reset_fib_reply { u32 context; i32 retval; }; /** \brief DHCP Proxy config add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf id @param if_ipv6 - ipv6 if non-zero, else ipv4 @param is_add - add the config if non-zero, else delete @param insert_circuit_id - option82 suboption 1 fib number @param dhcp_server[] - server address @param dhcp_src_address[] - */ define dhcp_proxy_config { u32 client_index; u32 context; u32 vrf_id; u8 is_ipv6; u8 is_add; u8 insert_circuit_id; u8 dhcp_server[16]; u8 dhcp_src_address[16]; }; /** \brief DHCP Proxy config response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define dhcp_proxy_config_reply { u32 context; i32 retval; }; /** \brief DHCP Proxy set / unset vss request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param tbl_id - table id @param oui - first part of vpn id @param fib_id - second part of vpn id @param is_ipv6 - ip6 if non-zero, else ip4 @param is_add - set vss if non-zero, else delete */ define dhcp_proxy_set_vss { u32 client_index; u32 context; u32 tbl_id; u32 oui; u32 fib_id; u8 is_ipv6; u8 is_add; }; /** \brief DHCP proxy set / unset vss response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define dhcp_proxy_set_vss_reply { u32 context; i32 retval; }; /** \brief Set the ip flow hash config for a fib request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf/fib id @param is_ipv6 - if non-zero the fib is ip6, else ip4 @param src - if non-zero include src in flow hash @param dst - if non-zero include dst in flow hash @param sport - if non-zero include sport in flow hash @param dport - if non-zero include dport in flow hash @param proto -if non-zero include proto in flow hash @param reverse - if non-zero include reverse in flow hash */ define set_ip_flow_hash { u32 client_index; u32 context; u32 vrf_id; u8 is_ipv6; u8 src; u8 dst; u8 sport; u8 dport; u8 proto; u8 reverse; }; /** \brief Set the ip flow hash config for a fib response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define set_ip_flow_hash_reply { u32 context; i32 retval; }; /** \brief IPv6 router advertisement config request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param suppress - @param managed - @param other - @param ll_option - @param send_unicast - @param cease - @param is_no - @param default_router - @param max_interval - @param min_interval - @param lifetime - @param initial_count - @param initial_interval - */ define sw_interface_ip6nd_ra_config { u32 client_index; u32 context; u32 sw_if_index; u8 suppress; u8 managed; u8 other; u8 ll_option; u8 send_unicast; u8 cease; u8 is_no; u8 default_router; u32 max_interval; u32 min_interval; u32 lifetime; u32 initial_count; u32 initial_interval; }; /** \brief IPv6 router advertisement config response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define sw_interface_ip6nd_ra_config_reply { u32 context; i32 retval; }; /** \brief IPv6 router advertisement prefix config request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - @param address[] - @param address_length - @param use_default - @param no_advertise - @param off_link - @param no_autoconfig - @param no_onlink - @param is_no - @param val_lifetime - @param pref_lifetime - */ define sw_interface_ip6nd_ra_prefix { u32 client_index; u32 context; u32 sw_if_index; u8 address[16]; u8 address_length; u8 use_default; u8 no_advertise; u8 off_link; u8 no_autoconfig; u8 no_onlink; u8 is_no; u32 val_lifetime; u32 pref_lifetime; }; /** \brief IPv6 router advertisement prefix config response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define sw_interface_ip6nd_ra_prefix_reply { u32 context; i32 retval; }; /** \brief IPv6 interface enable / disable request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface used to reach neighbor @param enable - if non-zero enable ip6 on interface, else disable */ define sw_interface_ip6_enable_disable { u32 client_index; u32 context; u32 sw_if_index; u8 enable; /* set to true if enable*/ }; /** \brief IPv6 interface enable / disable response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define sw_interface_ip6_enable_disable_reply { u32 context; i32 retval; }; /** \brief IPv6 set link local address on interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface to set link local on @param address[] - the new link local address @param address_length - link local address length */ define sw_interface_ip6_set_link_local_address { u32 client_index; u32 context; u32 sw_if_index; u8 address[16]; u8 address_length; }; /** \brief IPv6 set link local address on interface response @param context - sender context, to match reply w/ request @param retval - error code for the request */ define sw_interface_ip6_set_link_local_address_reply { u32 context; i32 retval; }; /** \brief Set unnumbered interface add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface with an IP address @param unnumbered_sw_if_index - interface which will use the address @param is_add - if non-zero set the association, else unset it */ define sw_interface_set_unnumbered { u32 client_index; u32 context; u32 sw_if_index; /* use this intfc address */ u32 unnumbered_sw_if_index; /* on this interface */ u8 is_add; }; /** \brief Set unnumbered interface add / del response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define sw_interface_set_unnumbered_reply { u32 context; i32 retval; }; /** \brief Create loopback interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param mac_address - mac addr to assign to the interface if none-zero */ define create_loopback { u32 client_index; u32 context; u8 mac_address[6]; }; /** \brief Create loopback interface response @param context - sender context, to match reply w/ request @param sw_if_index - sw index of the interface that was created @param retval - return code for the request */ define create_loopback_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief Delete loopback interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - sw index of the interface that was created */ define delete_loopback { u32 client_index; u32 context; u32 sw_if_index; }; /** \brief Delete loopback interface response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define delete_loopback_reply { u32 context; i32 retval; }; /** \brief Control ping from client to api server request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define control_ping { u32 client_index; u32 context; }; /** \brief Control ping from the client to the server response @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param retval - return code for the request @param vpe_pid - the pid of the vpe, returned by the server */ define control_ping_reply { u32 context; i32 retval; u32 client_index; u32 vpe_pid; }; /** \brief Process a vpe parser cli string request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param cmd_in_shmem - pointer to cli command string */ define cli_request { u32 client_index; u32 context; u64 cmd_in_shmem; }; /** \brief vpe parser cli string response @param context - sender context, to match reply w/ request @param retval - return code for request @param reply_in_shmem - Reply string from cli processing if any */ define cli_reply { u32 context; i32 retval; u64 reply_in_shmem; }; /** \brief Set max allowed ARP or ip6 neighbor entries request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_ipv6 - neighbor limit if non-zero, else ARP limit @param arp_neighbor_limit - the new limit, defaults are ~ 50k */ define set_arp_neighbor_limit { u32 client_index; u32 context; u8 is_ipv6; u32 arp_neighbor_limit; }; /** \brief Set max allowed ARP or ip6 neighbor entries response @param context - sender context, to match reply w/ request @param retval - return code for request */ define set_arp_neighbor_limit_reply { u32 context; i32 retval; }; /** \brief L2 interface patch add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param rx_sw_if_index - receive side interface @param tx_sw_if_index - transmit side interface @param is_add - if non-zero set up the interface patch, else remove it */ define l2_patch_add_del { u32 client_index; u32 context; u32 rx_sw_if_index; u32 tx_sw_if_index; u8 is_add; }; /** \brief L2 interface patch add / del response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define l2_patch_add_del_reply { u32 context; i32 retval; }; /** \brief IPv6 segment routing tunnel add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add the tunnel if non-zero, else delete it @param name[] - tunnel name (len. 64) @param src_address[] - @param dst_address[] - @param dst_mask_width - @param inner_vrf_id - @param outer_vrf_id - @param flags_net_byte_order - @param n_segments - @param n_tags - @param segs_and_tags[] - @param policy_name[] - name of policy to associate this tunnel to (len. 64) */ define sr_tunnel_add_del { u32 client_index; u32 context; u8 is_add; u8 name[64]; u8 src_address[16]; u8 dst_address[16]; u8 dst_mask_width; u32 inner_vrf_id; u32 outer_vrf_id; u16 flags_net_byte_order; u8 n_segments; u8 n_tags; u8 segs_and_tags[0]; u8 policy_name[64]; }; /** \brief IPv6 segment routing tunnel add / del response @param context - sender context, to match reply w/ request @param retval - return value for request */ define sr_tunnel_add_del_reply { u32 context; i32 retval; }; /** \brief IPv6 segment routing policy add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add the tunnel if non-zero, else delete it @param name[] - policy name (len. 64) @param tunnel_names[] - */ define sr_policy_add_del { u32 client_index; u32 context; u8 is_add; u8 name[64]; u8 tunnel_names[0]; }; /** \brief IPv6 segment routing policy add / del response @param context - sender context, to match reply w/ request @param retval - return value for request */ define sr_policy_add_del_reply { u32 context; i32 retval; }; /** \brief IPv6 segment routing multicast map to policy add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add the tunnel if non-zero, else delete it @param multicast_address[] - IP6 multicast address @param policy_name[] = policy name (len.64) */ define sr_multicast_map_add_del { u32 client_index; u32 context; u8 is_add; u8 multicast_address[16]; u8 policy_name[64]; }; /** \brief IPv6 segment routing multicast map to policy add / del response @param context - sender context, to match reply w/ request @param retval - return value for request */ define sr_multicast_map_add_del_reply { u32 context; i32 retval; }; /** \brief Interface set vpath request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface used to reach neighbor @param enable - if non-zero enable, else disable */ define sw_interface_set_vpath { u32 client_index; u32 context; u32 sw_if_index; u8 enable; }; /** \brief Interface set vpath response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define sw_interface_set_vpath_reply { u32 context; i32 retval; }; /** \brief MPLS Ethernet add / del tunnel request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param vrf_id - vrf_id, only for IP4 @param sw_if_index - interface used to reach neighbor @param is_add - add if set, tunnel delete if 0 @param dst_mac_address - @param adj_address - @param adj_address_length - */ define mpls_ethernet_add_del_tunnel { u32 client_index; u32 context; u32 vrf_id; u32 tx_sw_if_index; u8 is_add; u8 l2_only; u8 dst_mac_address[6]; u8 adj_address[4]; u8 adj_address_length; }; /** \brief Reply for MPLS Ethernet add / delete tunnel request @param context - sender context, to match reply w/ request @param retval - return code for the request */ define mpls_ethernet_add_del_tunnel_reply { u32 context; i32 retval; u32 tunnel_sw_if_index; }; /** \brief MPLS Ethernet add/ del tunnel 2 @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param inner_vrf_id - @param outer_vrf_id - @param resolve_attempts - @param resolve_opaque - @param resolve_if_needed - @param is_add - @param adj_address - @param adj_address_length - @param next_hop_ip4_address_in_outer_vrf - */ define mpls_ethernet_add_del_tunnel_2 { u32 client_index; u32 context; u32 inner_vrf_id; u32 outer_vrf_id; u32 resolve_attempts; u32 resolve_opaque; /* no need to set this */ u8 resolve_if_needed; u8 is_add; u8 l2_only; u8 adj_address[4]; u8 adj_address_length; u8 next_hop_ip4_address_in_outer_vrf [4]; }; /** \brief MPLS Ethernet add/ del tunnel 2 @param context - sender context, to match reply w/ request @param retval - return code for add /del request */ define mpls_ethernet_add_del_tunnel_2_reply { u32 context; i32 retval; }; /** \brief Set L2 XConnect between two interfaces request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param rx_sw_if_index - Receive interface index @param tx_sw_if_index - Transmit interface index @param enable - enable xconnect if not 0, else set to L3 mode */ define sw_interface_set_l2_xconnect { u32 client_index; u32 context; u32 rx_sw_if_index; u32 tx_sw_if_index; u8 enable; }; /** \brief Set L2 XConnect response @param context - sender context, to match reply w/ request @param retval - L2 XConnect request return code */ define sw_interface_set_l2_xconnect_reply { u32 context; i32 retval; }; /** \brief Interface bridge mode request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param rx_sw_if_index - the interface @param bd_id - bridge domain id @param bvi - Setup interface as a bvi, bridge mode only @param shg - Shared horizon group, for bridge mode only @param enable - Enable beige mode if not 0, else set to L3 mode */ define sw_interface_set_l2_bridge { u32 client_index; u32 context; u32 rx_sw_if_index; u32 bd_id; u8 shg; u8 bvi; u8 enable; }; /** \brief Interface bridge mode response @param context - sender context, to match reply w/ request @param retval - Bridge mode request return code */ define sw_interface_set_l2_bridge_reply { u32 context; i32 retval; }; /** \brief L2 FIB add entry request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param mac - the entry's mac address @param bd_id - the entry's bridge domain id @param sw_if_index - the interface @param is_add - If non zero add the entry, else delete it @param static_mac - @param filter_mac - */ define l2fib_add_del { u32 client_index; u32 context; u64 mac; u32 bd_id; u32 sw_if_index; u8 is_add; u8 static_mac; u8 filter_mac; u8 bvi_mac; }; /** \brief L2 FIB add entry response @param context - sender context, to match reply w/ request @param retval - return code for the add l2fib entry request */ define l2fib_add_del_reply { u32 context; i32 retval; }; /** \brief Set L2 flags request !!! TODO - need more info, feature bits in l2_input.h @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface @param is_set - if non-zero, set the bits, else clear them @param feature_bitmap - non-zero bits to set or clear */ define l2_flags { u32 client_index; u32 context; u32 sw_if_index; u8 is_set; u32 feature_bitmap; }; /** \brief Set L2 bits response @param context - sender context, to match reply w/ request @param retval - return code for the set l2 bits request */ define l2_flags_reply { u32 context; i32 retval; u32 resulting_feature_bitmap; }; /** \brief Set bridge flags (such as L2_LEARN, L2_FWD, L2_FLOOD, L2_UU_FLOOD, or L2_ARP_TERM) request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param bd_id - the bridge domain to set the flags for @param is_set - if non-zero, set the flags, else clear them @param feature_bitmap - bits that are non-zero to set or clear */ define bridge_flags { u32 client_index; u32 context; u32 bd_id; u8 is_set; u32 feature_bitmap; }; /** \brief Set bridge flags response @param context - sender context, to match reply w/ request @param retval - return code for the set bridge flags request @param resulting_feature_bitmap - the feature bitmap value after the request is implemented */ define bridge_flags_reply { u32 context; i32 retval; u32 resulting_feature_bitmap; }; /** \brief Set bridge domain ip to mac entry request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param bd_id - the bridge domain to set the flags for @param is_add - if non-zero, add the entry, else clear it @param is_ipv6 - if non-zero, ipv6 address, else ipv4 address @param mac_address - MAC address @param */ define bd_ip_mac_add_del { u32 client_index; u32 context; u32 bd_id; u8 is_add; u8 is_ipv6; u8 ip_address[16]; u8 mac_address[6]; }; /** \brief Set bridge domain ip to mac entry response @param context - sender context, to match reply w/ request @param retval - return code for the set bridge flags request */ define bd_ip_mac_add_del_reply { u32 context; i32 retval; }; /** \brief Add/Delete classification table request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add- if non-zero add the table, else delete it @param table_index - if add, reuturns index of the created table, else specifies the table to delete @param nbuckets - number of buckets when adding a table @param memory_size - memory size when adding a table @param match_n_vectors - number of match vectors @param next_table_index - index of next table @param miss_next_index - index of miss table @param mask[] - match mask */ define classify_add_del_table { u32 client_index; u32 context; u8 is_add; u32 table_index; u32 nbuckets; u32 memory_size; u32 skip_n_vectors; u32 match_n_vectors; u32 next_table_index; u32 miss_next_index; u8 mask[0]; }; /** \brief Add/Delete classification table response @param context - sender context, to match reply w/ request @param retval - return code for the table add/del requst @param new_table_index - for add, returned index of the new table @param skip_n_vectors - for add, returned value of skip_n_vectors in table @param match_n_vectors -for add, returned value of match_n_vectors in table */ define classify_add_del_table_reply { u32 context; i32 retval; u32 new_table_index; u32 skip_n_vectors; u32 match_n_vectors; }; /** \brief Classify add / del session request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add session if non-zero, else delete @param table_index - index of the table to add/del the session, required @param hit_next_index - for add, hit_next_index of new session, required @param opaque_index - for add, opaque_index of new session @param advance -for add, advance value for session @param match[] - for add, match value for session, required */ define classify_add_del_session { u32 client_index; u32 context; u8 is_add; u32 table_index; u32 hit_next_index; u32 opaque_index; i32 advance; u8 match[0]; }; /** \brief Classify add / del session response @param context - sender context, to match reply w/ request @param retval - return code for the add/del session request */ define classify_add_del_session_reply { u32 context; i32 retval; }; /** \brief Set/unset the classification table for an interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_ipv6 - ipv6 if non-zero, else ipv4 @param sw_if_index - interface to associate with the table @param table_index - index of the table, if ~0 unset the table */ define classify_set_interface_ip_table { u32 client_index; u32 context; u8 is_ipv6; u32 sw_if_index; u32 table_index; /* ~0 => off */ }; /** \brief Set/unset interface classification table response @param context - sender context, to match reply w/ request @param retval - return code */ define classify_set_interface_ip_table_reply { u32 context; i32 retval; }; /** \brief Set/unset l2 classification tables for an interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface to set/unset tables for @param ip4_table_index - ip4 index, use ~0 for all 3 indexes to unset @param ip6_table_index - ip6 index @param other_table_index - other index */ define classify_set_interface_l2_tables { u32 client_index; u32 context; u32 sw_if_index; /* 3 x ~0 => off */ u32 ip4_table_index; u32 ip6_table_index; u32 other_table_index; }; /** \brief Set/unset l2 classification tables for an interface response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define classify_set_interface_l2_tables_reply { u32 context; i32 retval; }; /** \brief Get node index using name request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param node_name[] - name of the node */ define get_node_index { u32 client_index; u32 context; u8 node_name[64]; }; /** \brief Get node index using name request @param context - sender context, to match reply w/ request @param retval - return code for the request @param node_index - index of the desired node if found, else ~0 */ define get_node_index_reply { u32 context; i32 retval; u32 node_index; }; /** \brief Set the next node for a given node request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param node_name[] - node to add the next node to @param next_name[] - node to add as the next node */ define add_node_next { u32 client_index; u32 context; u8 node_name[64]; u8 next_name[64]; }; /** \brief IP Set the next node for a given node response @param context - sender context, to match reply w/ request @param retval - return code for the add next node request @param next_index - the index of the next node if success, else ~0 */ define add_node_next_reply { u32 context; i32 retval; u32 next_index; }; /** \brief DHCP Proxy config 2 add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param rx_vrf_id - receive vrf id @param server_vrf_id - server vrf id @param if_ipv6 - ipv6 if non-zero, else ipv4 @param is_add - add the config if non-zero, else delete @param insert_circuit_id - option82 suboption 1 fib number @param dhcp_server[] - server address @param dhcp_src_address[] - */ define dhcp_proxy_config_2 { u32 client_index; u32 context; u32 rx_vrf_id; u32 server_vrf_id; u8 is_ipv6; u8 is_add; u8 insert_circuit_id; u8 dhcp_server[16]; u8 dhcp_src_address[16]; }; /** \brief DHCP Proxy config 2 add / del response @param context - sender context, to match reply w/ request @param retval - return code for request */ define dhcp_proxy_config_2_reply { u32 context; i32 retval; }; /** \brief l2tpv3 tunnel interface create request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param client_address - remote client tunnel ip address @param client_address - local tunnel ip address @param is_ipv6 - ipv6 if non-zero, else ipv4 @param local_session_id - local tunnel session id @param remote_session_id - remote tunnel session id @param local_cookie - local tunnel cookie @param l2_sublayer_present - l2 sublayer is present in packets if non-zero @param encap_vrf_id - fib identifier used for outgoing encapsulated packets */ define l2tpv3_create_tunnel { u32 client_index; u32 context; u8 client_address [16]; u8 our_address [16]; u8 is_ipv6; u32 local_session_id; u32 remote_session_id; u64 local_cookie; u64 remote_cookie; u8 l2_sublayer_present; u32 encap_vrf_id; }; /** \brief l2tpv3 tunnel interface create response @param context - sender context, to match reply w/ request @param retval - return code for the request @param sw_if_index - index of the new tunnel interface */ define l2tpv3_create_tunnel_reply { u32 context; i32 retval; u32 sw_if_index; }; define l2tpv3_set_tunnel_cookies { u32 client_index; u32 context; u32 sw_if_index; u64 new_local_cookie; u64 new_remote_cookie; }; /** \brief L2TP tunnel set cookies response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define l2tpv3_set_tunnel_cookies_reply { u32 context; i32 retval; }; define sw_if_l2tpv3_tunnel_details { u32 context; u32 sw_if_index; u8 interface_name[64]; u8 client_address [16]; u8 our_address [16]; u32 local_session_id; u32 remote_session_id; u64 local_cookie[2]; u64 remote_cookie; u8 l2_sublayer_present; }; define sw_if_l2tpv3_tunnel_dump { u32 client_index; u32 context; }; /** \brief L2 fib clear table request, clear all mac entries in the l2 fib @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define l2_fib_clear_table { u32 client_index; u32 context; }; /** \brief L2 fib clear table response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define l2_fib_clear_table_reply { u32 context; i32 retval; }; /** \brief L2 interface ethernet flow point filtering enable/disable request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface to enable/disable filtering on @param enable_disable - if non-zero enable filtering, else disable */ define l2_interface_efp_filter { u32 client_index; u32 context; u32 sw_if_index; u32 enable_disable; }; /** \brief L2 interface ethernet flow point filtering response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define l2_interface_efp_filter_reply { u32 context; i32 retval; }; define l2tpv3_interface_enable_disable { u32 client_index; u32 context; u8 enable_disable; u32 sw_if_index; }; define l2tpv3_interface_enable_disable_reply { u32 context; i32 retval; }; define l2tpv3_set_lookup_key { u32 client_index; u32 context; /* 0 = ip6 src_address, 1 = ip6 dst_address, 2 = session_id */ u8 key; }; define l2tpv3_set_lookup_key_reply { u32 context; i32 retval; }; define vxlan_add_del_tunnel { u32 client_index; u32 context; u8 is_add; u8 is_ipv6; u8 src_address[16]; u8 dst_address[16]; u32 encap_vrf_id; u32 decap_next_index; u32 vni; }; define vxlan_add_del_tunnel_reply { u32 context; i32 retval; u32 sw_if_index; }; define vxlan_tunnel_dump { u32 client_index; u32 context; u32 sw_if_index; }; define vxlan_tunnel_details { u32 context; u32 sw_if_index; u8 src_address[16]; u8 dst_address[16]; u32 encap_vrf_id; u32 decap_next_index; u32 vni; u8 is_ipv6; }; define gre_add_del_tunnel { u32 client_index; u32 context; u8 is_add; u8 is_ipv6; u8 src_address[16]; u8 dst_address[16]; u32 outer_fib_id; }; define gre_add_del_tunnel_reply { u32 context; i32 retval; u32 sw_if_index; }; define gre_tunnel_dump { u32 client_index; u32 context; u32 sw_if_index; }; define gre_tunnel_details { u32 context; u32 sw_if_index; u8 is_ipv6; u8 src_address[16]; u8 dst_address[16]; u32 outer_fib_id; }; /** \brief L2 interface vlan tag rewrite configure request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface the operation is applied to @param vtr_op - Choose from l2_vtr_op_t enum values @param push_dot1q - first pushed flag dot1q id set, else dot1ad @param tag1 - Needed for any push or translate vtr op @param tag2 - Needed for any push 2 or translate x-2 vtr ops */ define l2_interface_vlan_tag_rewrite { u32 client_index; u32 context; u32 sw_if_index; u32 vtr_op; u32 push_dot1q; // ethertype of first pushed tag is dot1q/dot1ad u32 tag1; // first pushed tag u32 tag2; // second pushed tag }; /** \brief L2 interface vlan tag rewrite response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define l2_interface_vlan_tag_rewrite_reply { u32 context; i32 retval; }; /** \brief vhost-user interface create request @param client_index - opaque cookie to identify the sender @param is_server - our side is socket server @param sock_filename - unix socket filename, used to speak with frontend @param use_custom_mac - enable or disable the use of the provided hardware address @param mac_address - hardware address to use if 'use_custom_mac' is set */ define create_vhost_user_if { u32 client_index; u32 context; u8 is_server; u8 sock_filename[256]; u8 renumber; u32 custom_dev_instance; u8 use_custom_mac; u8 mac_address[6]; }; /** \brief vhost-user interface create response @param context - sender context, to match reply w/ request @param retval - return code for the request @param sw_if_index - interface the operation is applied to */ define create_vhost_user_if_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief vhost-user interface modify request @param client_index - opaque cookie to identify the sender @param is_server - our side is socket server @param sock_filename - unix socket filename, used to speak with frontend */ define modify_vhost_user_if { u32 client_index; u32 context; u32 sw_if_index; u8 is_server; u8 sock_filename[256]; u8 renumber; u32 custom_dev_instance; }; /** \brief vhost-user interface modify response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define modify_vhost_user_if_reply { u32 context; i32 retval; }; /** \brief vhost-user interface delete request @param client_index - opaque cookie to identify the sender */ define delete_vhost_user_if { u32 client_index; u32 context; u32 sw_if_index; }; /** \brief vhost-user interface delete response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define delete_vhost_user_if_reply { u32 context; i32 retval; }; define create_subif { u32 client_index; u32 context; u32 sw_if_index; u32 sub_id; /* These fields map directly onto the subif template */ u8 no_tags; u8 one_tag; u8 two_tags; u8 dot1ad; // 0 = dot1q, 1=dot1ad u8 exact_match; u8 default_sub; u8 outer_vlan_id_any; u8 inner_vlan_id_any; u16 outer_vlan_id; u16 inner_vlan_id; }; define create_subif_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief show version @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define show_version { u32 client_index; u32 context; }; /** \brief show version response @param context - sender context, to match reply w/ request @param retval - return code for the request @param program - name of the program (vpe) @param version - version of the program @param build_directory - root of the workspace where the program was built */ define show_version_reply { u32 context; i32 retval; u8 program[32]; u8 version[32]; u8 build_date[32]; u8 build_directory[256]; }; /** \brief Vhost-user interface details structure (fix this) @param sw_if_index - index of the interface @param interface_name - name of interface @param virtio_net_hdr_sz - net header size @param features - interface features @param is_server - vhost-user server socket @param sock_filename - socket filename @param num_regions - number of used memory regions */ define sw_interface_vhost_user_details { u32 context; u32 sw_if_index; u8 interface_name[64]; u32 virtio_net_hdr_sz; u64 features; u8 is_server; u8 sock_filename[256]; u32 num_regions; i32 sock_errno; }; /* works */ define sw_interface_vhost_user_dump { u32 client_index; u32 context; }; define ip_address_details { u32 client_index; u32 context; u8 ip[16]; u8 prefix_length; }; define ip_address_dump { u32 client_index; u32 context; u32 sw_if_index; u8 is_ipv6; }; define ip_details { u32 sw_if_index; u32 context; }; define ip_dump { u32 client_index; u32 context; u8 is_ipv6; }; /** \brief l2 fib table entry structure @param bd_id - the l2 fib / bridge domain table id @param mac - the entry's mac address @param sw_if_index - index of the interface @param static_mac - the entry is statically configured. @param filter_mac - the entry is a mac filter entry. @param bvi_mac - the mac address is a bridge virtual interface */ define l2_fib_table_entry { u32 context; u32 bd_id; u64 mac; u32 sw_if_index; u8 static_mac; u8 filter_mac; u8 bvi_mac; }; /** \brief Dump l2 fib (aka bridge domain) table @param client_index - opaque cookie to identify the sender @param bd_id - the l2 fib / bridge domain table identifier */ define l2_fib_table_dump { u32 client_index; u32 context; u32 bd_id; }; define vxlan_gpe_add_del_tunnel { u32 client_index; u32 context; u8 is_ipv6; u8 local[16]; u8 remote[16]; u32 encap_vrf_id; u32 decap_vrf_id; u8 protocol; u32 vni; u8 is_add; }; define vxlan_gpe_add_del_tunnel_reply { u32 context; i32 retval; u32 sw_if_index; }; define vxlan_gpe_tunnel_dump { u32 client_index; u32 context; u32 sw_if_index; }; define vxlan_gpe_tunnel_details { u32 context; u32 sw_if_index; u8 local[16]; u8 remote[16]; u32 vni; u8 protocol; u32 encap_vrf_id; u32 decap_vrf_id; u8 is_ipv6; }; /** \brief add or delete locator_set @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param locator_set_name - locator name */ define lisp_add_del_locator_set { u32 client_index; u32 context; u8 is_add; u8 locator_set_name[64]; u32 locator_num; u8 locators[0]; }; /** \brief Reply for locator_set add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_locator_set_reply { u32 context; i32 retval; }; /** \brief add or delete locator for locator_set @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param locator_set_name - name of locator_set to add/del locator @param sw_if_index - index of the interface @param priority - priority of the lisp locator @param weight - weight of the lisp locator */ define lisp_add_del_locator { u32 client_index; u32 context; u8 is_add; u8 locator_set_name[64]; u32 sw_if_index; u8 priority; u8 weight; }; /** \brief Reply for locator add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_locator_reply { u32 context; i32 retval; }; /** \brief add or delete lisp eid-table @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param eid_type: 0 : ipv4 1 : ipv6 2 : mac @param eid - EID can be ip4, ip6 or mac @param prefix_len - prefix len @param locator_set_name - name of locator_set to add/del eid-table @param vni - virtual network instance */ define lisp_add_del_local_eid { u32 client_index; u32 context; u8 is_add; u8 eid_type; u8 eid[16]; u8 prefix_len; u8 locator_set_name[64]; u32 vni; }; /** \brief Reply for local_eid add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_local_eid_reply { u32 context; i32 retval; }; /** \brief add or delete lisp gpe maptunel @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param eid_is_ipv6 - if non-zero the address is ipv6, else ipv4 @param eid_ip_address - array of address bytes @param eid_prefix_len - prefix len @param address_is_ipv6 - if non-zero the address is ipv6, else ipv4 @param source_ip_address - array of address bytes @param destination_ip_address - array of address bytes */ define lisp_gpe_add_del_fwd_entry { u32 client_index; u32 context; u8 is_add; u8 eid_is_ipv6; u8 eid_ip_address[16]; u8 eid_prefix_len; u8 address_is_ipv6; u8 source_ip_address[16]; u8 destination_ip_address[16]; }; /** \brief Reply for gpe_fwd_entry add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_gpe_add_del_fwd_entry_reply { u32 context; i32 retval; }; /** \brief add or delete map-resolver @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param is_ipv6 - if non-zero the address is ipv6, else ipv4 @param ip_address - array of address bytes */ define lisp_add_del_map_resolver { u32 client_index; u32 context; u8 is_add; u8 is_ipv6; u8 ip_address[16]; }; /** \brief Reply for map_resolver add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_map_resolver_reply { u32 context; i32 retval; }; /** \brief enable or disable lisp-gpe protocol @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_en - enable protocol if non-zero, else disable */ define lisp_gpe_enable_disable { u32 client_index; u32 context; u8 is_en; }; /** \brief Reply for gpe enable/disable @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_gpe_enable_disable_reply { u32 context; i32 retval; }; /** \brief enable or disable LISP feature @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_en - enable protocol if non-zero, else disable */ define lisp_enable_disable { u32 client_index; u32 context; u8 is_en; }; /** \brief Reply for gpe enable/disable @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_enable_disable_reply { u32 context; i32 retval; }; /** \brief add or delete gpe_iface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete */ define lisp_gpe_add_del_iface { u32 client_index; u32 context; u8 is_add; u32 table_id; u32 vni; }; /** \brief Reply for gpe_iface add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_gpe_add_del_iface_reply { u32 context; i32 retval; }; /** \brief configure or disable LISP PITR node @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param ls_name - locator set name @param is_add - add locator set if non-zero, else disable pitr */ define lisp_pitr_set_locator_set { u32 client_index; u32 context; u8 is_add; u8 ls_name[64]; }; /** \brief Reply for lisp_pitr_set_locator_set @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_pitr_set_locator_set_reply { u32 context; i32 retval; }; /** \brief add or delete remote static mapping @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param del_all - if set, delete all remote mappings @param vni - virtual network instance @param action - negative map-reply action @param eid_type - 0 : ipv4 1 : ipv6 2 : mac @param deid - destination EID @param seid - source EID @param rloc_num - number of remote locators @param rlocs - remote locator data */ define lisp_add_del_remote_mapping { u32 client_index; u32 context; u8 is_add; u8 del_all; u32 vni; u8 action; u8 eid_type; u8 deid[16]; u8 seid[16]; u8 deid_len; u8 seid_len; u32 rloc_num; u8 rlocs[0]; }; /** \brief Reply for lisp_add_del_remote_mapping @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_remote_mapping_reply { u32 context; i32 retval; }; /** \brief add or delete LISP adjacency adjacency @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param vni - virtual network instance @param eid_type - 0 : ipv4 1 : ipv6 2 : mac @param deid - destination EID @param seid - source EID */ define lisp_add_del_adjacency { u32 client_index; u32 context; u8 is_add; u32 vni; u8 eid_type; u8 deid[16]; u8 seid[16]; u8 deid_len; u8 seid_len; }; /** \brief Reply for lisp_add_del_adjacency @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_adjacency_reply { u32 context; i32 retval; }; /** \brief add or delete map request itr rlocs @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add address if non-zero, else delete @param locator_set_name - locator set name */ define lisp_add_del_map_request_itr_rlocs { u32 client_index; u32 context; u8 is_add; u8 locator_set_name[64]; }; /** \brief Reply for lisp_add_del_map_request_itr_rlocs @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_add_del_map_request_itr_rlocs_reply { u32 context; i32 retval; }; /** \brief map/unmap vni to vrf @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add or delete mapping @param vni - virtual network id @param vrf - vrf */ define lisp_eid_table_add_del_map { u32 client_index; u32 context; u8 is_add; u32 vni; u32 vrf; }; /** \brief Reply for lisp_eid_table_add_del_map @param context - returned sender context, to match reply w/ request @param retval - return code */ define lisp_eid_table_add_del_map_reply { u32 context; i32 retval; }; /** \brief LISP locator_set status @param locator_set_name - name of the locator_set @param sw_if_index - sw_if_index of the locator @param priority - locator priority @param weight - locator weight */ define lisp_locator_set_details { u32 context; u8 local; u8 locator_set_name[64]; u32 sw_if_index; u8 is_ipv6; u8 ip_address[16]; u8 prefix_len; u8 priority; u8 weight; }; /** \brief Request for locator_set summary status @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define lisp_locator_set_dump { u32 client_index; u32 context; }; /** \brief LISP local eid table status @param locator_set_name - name of the locator_set @param eid_type - ip4, ip6 or l2 mac address @param eid - array of address bytes @param eid_prefix_len - prefix len */ define lisp_local_eid_table_details { u32 context; u8 locator_set_name[64]; u8 eid_type; u32 vni; u8 eid[16]; u8 eid_prefix_len; }; /** \brief Request for local eid table summary status @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param eid_set - if non-zero request info about specific mapping @param vni - virtual network instance; valid only if eid_set != 0 @param prefix_length - prefix length if EID is IP address; valid only if eid_set != 0 @param eid_type - EID type; valid only if eid_set != 0 Supported values: 0: EID is IPv4 1: EID is IPv6 2: EID is ethernet address @param eid - endpoint identifier */ define lisp_local_eid_table_dump { u32 client_index; u32 context; u8 eid_set; u8 prefix_length; u32 vni; u8 eid_type; u8 eid[16]; }; /** \brief Shows relationship between vni and vrf @param vrf - VRF index @param vni - vitual network instance */ define lisp_eid_table_map_details { u32 context; u32 vni; u32 vrf; }; /** \brief Request for lisp_eid_table_map_details @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define lisp_eid_table_map_dump { u32 client_index; u32 context; }; define lisp_gpe_tunnel_details { u32 context; u32 tunnels; u8 is_ipv6; u8 source_ip[16]; u8 destination_ip[16]; u32 encap_fib_id; u32 decap_fib_id; u32 dcap_next; u8 lisp_ver; u8 next_protocol; u8 flags; u8 ver_res; u8 res; u32 iid; }; /** \brief Request for gpe tunnel summary status @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define lisp_gpe_tunnel_dump { u32 client_index; u32 context; }; /** \brief LISP map resolver status @param locator_set_name - name of the locator_set @param is_ipv6 - if non-zero the address is ipv6, else ipv4 @param ip_address - array of address bytes */ define lisp_map_resolver_details { u32 context; u8 is_ipv6; u8 ip_address[16]; }; /** \brief Request for map resolver summary status @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define lisp_map_resolver_dump { u32 client_index; u32 context; }; /** \brief Status of lisp-gpe protocol, enable or disable @param context - sender context, to match reply w/ request @param is_en - enable protocol if non-zero, else disable */ define lisp_enable_disable_status_details { u32 context; u8 feature_status; u8 gpe_status; }; /** \brief Request for lisp-gpe protocol status @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define lisp_enable_disable_status_dump { u32 client_index; u32 context; }; /** \brief Get LISP map request itr rlocs status @param context - sender context, to match reply w/ request @param locator_set_name - name of the locator_set */ define lisp_get_map_request_itr_rlocs { u32 client_index; u32 context; }; /** \brief Request for map request itr rlocs summary status */ define lisp_get_map_request_itr_rlocs_reply { u32 context; i32 retval; u8 locator_set_name[64]; }; /** \brief Request for lisp pitr status @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define show_lisp_pitr { u32 client_index; u32 context; }; /** \brief Status of lisp pitr, enable or disable @param context - sender context, to match reply w/ request @param status - lisp pitr enable if non-zero, else disable @param locator_set_name - name of the locator_set */ define show_lisp_pitr_reply { u32 context; i32 retval; u8 status; u8 locator_set_name[64]; }; /* Gross kludge, DGMS */ define interface_name_renumber { u32 client_index; u32 context; u32 sw_if_index; u32 new_show_dev_instance; }; define interface_name_renumber_reply { u32 context; i32 retval; }; /** \brief Register for ip4 arp resolution events @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param enable_disable - 1 => register for events, 0 => cancel registration @param pid - sender's pid @param address - the exact ip4 address of interest */ define want_ip4_arp_events { u32 client_index; u32 context; u8 enable_disable; u32 pid; u32 address; }; /** \brief Reply for interface events registration @param context - returned sender context, to match reply w/ request @param retval - return code */ define want_ip4_arp_events_reply { u32 context; i32 retval; }; /** \brief Tell client about an ip4 arp resolution event @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param address - the exact ip4 address of interest @param pid - client pid registered to receive notification @param sw_if_index - interface which received ARP packet @param new_mac - the new mac address */ define ip4_arp_event { u32 client_index; u32 context; u32 address; u32 pid; u32 sw_if_index; u8 new_mac[6]; }; /** \brief L2 bridge domain add or delete request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param bd_id - the bridge domain to create @param flood - enable/disable bcast/mcast flooding in the bd @param uu_flood - enable/disable uknown unicast flood in the bd @param forward - enable/disable forwarding on all interfaces in the bd @param learn - enable/disable learning on all interfaces in the bd @param arp_term - enable/disable arp termination in the bd @param is_add - add or delete flag */ define bridge_domain_add_del { u32 client_index; u32 context; u32 bd_id; u8 flood; u8 uu_flood; u8 forward; u8 learn; u8 arp_term; u8 is_add; }; /** \brief L2 bridge domain add or delete response @param context - sender context, to match reply w/ request @param retval - return code for the set bridge flags request */ define bridge_domain_add_del_reply { u32 context; i32 retval; }; /** \brief L2 bridge domain request operational state details @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param bd_id - the bridge domain id desired or ~0 to request all bds */ define bridge_domain_dump { u32 client_index; u32 context; u32 bd_id; }; /** \brief L2 bridge domain operational state response @param bd_id - the bridge domain id @param flood - bcast/mcast flooding state on all interfaces in the bd @param uu_flood - uknown unicast flooding state on all interfaces in the bd @param forward - forwarding state on all interfaces in the bd @param learn - learning state on all interfaces in the bd @param arp_term - arp termination state on all interfaces in the bd @param n_sw_ifs - number of sw_if_index's in the domain */ define bridge_domain_details { u32 context; u32 bd_id; u8 flood; u8 uu_flood; u8 forward; u8 learn; u8 arp_term; u32 bvi_sw_if_index; u32 n_sw_ifs; }; /** \brief L2 bridge domain sw interface operational state response @param bd_id - the bridge domain id @param sw_if_index - sw_if_index in the domain @param shg - split horizon group for the interface */ define bridge_domain_sw_if_details { u32 context; u32 bd_id; u32 sw_if_index; u8 shg; }; /** \brief DHCP Client config add / del request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - index of the interface for DHCP client @param hostname - hostname @param is_add - add the config if non-zero, else delete @param want_dhcp_event - DHCP event sent to the sender via dhcp_compl_event API message if non-zero @param pid - sender's pid */ define dhcp_client_config { u32 client_index; u32 context; u32 sw_if_index; u8 hostname[64]; u8 is_add; u8 want_dhcp_event; u32 pid; }; /** \brief DHCP Client config response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define dhcp_client_config_reply { u32 context; i32 retval; }; /** \brief Set/unset input ACL interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface to set/unset input ACL @param ip4_table_index - ip4 classify table index (~0 for skip) @param ip6_table_index - ip6 classify table index (~0 for skip) @param l2_table_index - l2 classify table index (~0 for skip) @param is_add - Set input ACL if non-zero, else unset Note: User is recommeneded to use just one valid table_index per call. (ip4_table_index, ip6_table_index, or l2_table_index) */ define input_acl_set_interface { u32 client_index; u32 context; u32 sw_if_index; u32 ip4_table_index; u32 ip6_table_index; u32 l2_table_index; u8 is_add; }; /** \brief Set/unset input ACL interface response @param context - sender context, to match reply w/ request @param retval - return code for the request */ define input_acl_set_interface_reply { u32 context; i32 retval; }; /** \brief IPsec: Add/delete Security Policy Database @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add SPD if non-zero, else delete @param spd_id - SPD instance id (control plane allocated) */ define ipsec_spd_add_del { u32 client_index; u32 context; u8 is_add; u32 spd_id; }; /** \brief Reply for IPsec: Add/delete Security Policy Database entry @param context - returned sender context, to match reply w/ request @param retval - return code */ define ipsec_spd_add_del_reply { u32 context; i32 retval; }; /** \brief IPsec: Add/delete SPD from interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add security mode if non-zero, else delete @param sw_if_index - index of the interface @param spd_id - SPD instance id to use for lookups */ define ipsec_interface_add_del_spd { u32 client_index; u32 context; u8 is_add; u32 sw_if_index; u32 spd_id; }; /** \brief Reply for IPsec: Add/delete SPD from interface @param context - returned sender context, to match reply w/ request @param retval - return code */ define ipsec_interface_add_del_spd_reply { u32 context; i32 retval; }; /** \brief IPsec: Add/delete Security Policy Database entry See RFC 4301, 4.4.1.1 on how to match packet to selectors @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add SPD if non-zero, else delete @param spd_id - SPD instance id (control plane allocated) @param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower @param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic @param is_ipv6 - remote/local address are IPv6 if non-zero, else IPv4 @param remote_address_start - start of remote address range to match @param remote_address_stop - end of remote address range to match @param local_address_start - start of local address range to match @param local_address_stop - end of local address range to match @param protocol - protocol type to match [0 means any] @param remote_port_start - start of remote port range to match ... @param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE] @param local_port_start - start of local port range to match ... @param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE] @param policy - 0 = bypass (no IPsec processing), 1 = discard (discard packet with ICMP processing), 2 = resolve (send request to control plane for SA resolving, and discard without ICMP processing), 3 = protect (apply IPsec policy using following parameters) @param sa_id - SAD instance id (control plane allocated) */ define ipsec_spd_add_del_entry { u32 client_index; u32 context; u8 is_add; u32 spd_id; i32 priority; u8 is_outbound; // Selector u8 is_ipv6; u8 is_ip_any; u8 remote_address_start[16]; u8 remote_address_stop[16]; u8 local_address_start[16]; u8 local_address_stop[16]; u8 protocol; u16 remote_port_start; u16 remote_port_stop; u16 local_port_start; u16 local_port_stop; // Policy u8 policy; u32 sa_id; }; /** \brief Reply for IPsec: Add/delete Security Policy Database entry @param context - returned sender context, to match reply w/ request @param retval - return code */ define ipsec_spd_add_del_entry_reply { u32 context; i32 retval; }; /** \brief IPsec: Add/delete Security Association Database entry @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add SAD entry if non-zero, else delete @param sad_id - sad id @param spi - security parameter index @param protocol - 0 = AH, 1 = ESP @param crypto_algorithm - 0 = Null, 1 = AES-CBC-128, 2 = AES-CBC-192, 3 = AES-CBC-256, 4 = 3DES-CBC @param crypto_key_length - length of crypto_key in bytes @param crypto_key - crypto keying material @param integrity_algorithm - 0 = None, 1 = MD5-96, 2 = SHA1-96, 3 = SHA-256, 4 = SHA-384, 5=SHA-512 @param integrity_key_length - length of integrity_key in bytes @param integrity_key - integrity keying material @param use_extended_sequence_number - use ESN when non-zero @param is_tunnel - IPsec tunnel mode if non-zero, else transport mode @param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero To be added: Anti-replay IPsec tunnel address copy mode (to support GDOI) */ define ipsec_sad_add_del_entry { u32 client_index; u32 context; u8 is_add; u32 sad_id; u32 spi; u8 protocol; u8 crypto_algorithm; u8 crypto_key_length; u8 crypto_key[128]; u8 integrity_algorithm; u8 integrity_key_length; u8 integrity_key[128]; u8 use_extended_sequence_number; u8 is_tunnel; u8 is_tunnel_ipv6; u8 tunnel_src_address[16]; u8 tunnel_dst_address[16]; }; /** \brief Reply for IPsec: Add/delete Security Association Database entry @param context - returned sender context, to match reply w/ request @param retval - return code */ define ipsec_sad_add_del_entry_reply { u32 context; i32 retval; }; /** \brief IPsec: Update Security Association keys @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sa_id - sa id @param crypto_key_length - length of crypto_key in bytes @param crypto_key - crypto keying material @param integrity_key_length - length of integrity_key in bytes @param integrity_key - integrity keying material */ define ipsec_sa_set_key { u32 client_index; u32 context; u32 sa_id; u8 crypto_key_length; u8 crypto_key[128]; u8 integrity_key_length; u8 integrity_key[128]; }; /** \brief Reply for IPsec: Update Security Association keys @param context - returned sender context, to match reply w/ request @param retval - return code */ define ipsec_sa_set_key_reply { u32 context; i32 retval; }; /** \brief IKEv2: Add/delete profile @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param name - IKEv2 profile name @param is_add - Add IKEv2 profile if non-zero, else delete */ define ikev2_profile_add_del { u32 client_index; u32 context; u8 name[64]; u8 is_add; }; /** \brief Reply for IKEv2: Add/delete profile @param context - returned sender context, to match reply w/ request @param retval - return code */ define ikev2_profile_add_del_reply { u32 context; i32 retval; }; /** \brief IKEv2: Set IKEv2 profile authentication method @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param name - IKEv2 profile name @param auth_method - IKEv2 authentication method (shared-key-mic/rsa-sig) @param is_hex - Authentication data in hex format if non-zero, else string @param data_len - Authentication data length @param data - Authentication data (for rsa-sig cert file path) */ define ikev2_profile_set_auth { u32 client_index; u32 context; u8 name[64]; u8 auth_method; u8 is_hex; u32 data_len; u8 data[0]; }; /** \brief Reply for IKEv2: Set IKEv2 profile authentication method @param context - returned sender context, to match reply w/ request @param retval - return code */ define ikev2_profile_set_auth_reply { u32 context; i32 retval; }; /** \brief IKEv2: Set IKEv2 profile local/remote identification @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param name - IKEv2 profile name @param is_local - Identification is local if non-zero, else remote @param id_type - Identification type @param data_len - Identification data length @param data - Identification data */ define ikev2_profile_set_id { u32 client_index; u32 context; u8 name[64]; u8 is_local; u8 id_type; u32 data_len; u8 data[0]; }; /** \brief Reply for IKEv2: @param context - returned sender context, to match reply w/ request @param retval - return code */ define ikev2_profile_set_id_reply { u32 context; i32 retval; }; /** \brief IKEv2: Set IKEv2 profile traffic selector parameters @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param name - IKEv2 profile name @param is_local - Traffic selector is local if non-zero, else remote @param proto - Traffic selector IP protocol (if zero not relevant) @param start_port - The smallest port number allowed by traffic selector @param end_port - The largest port number allowed by traffic selector @param start_addr - The smallest address included in traffic selector @param end_addr - The largest address included in traffic selector */ define ikev2_profile_set_ts { u32 client_index; u32 context; u8 name[64]; u8 is_local; u8 proto; u16 start_port; u16 end_port; u32 start_addr; u32 end_addr; }; /** \brief Reply for IKEv2: Set IKEv2 profile traffic selector parameters @param context - returned sender context, to match reply w/ request @param retval - return code */ define ikev2_profile_set_ts_reply { u32 context; i32 retval; }; /** \brief IKEv2: Set IKEv2 local RSA private key @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param key_file - Key file absolute path */ define ikev2_set_local_key { u32 client_index; u32 context; u8 key_file[256]; }; /** \brief Reply for IKEv2: Set IKEv2 local key @param context - returned sender context, to match reply w/ request @param retval - return code */ define ikev2_set_local_key_reply { u32 context; i32 retval; }; /** \brief Tell client about a DHCP completion event @param client_index - opaque cookie to identify the sender @param pid - client pid registered to receive notification @param is_ipv6 - if non-zero the address is ipv6, else ipv4 @param host_address - Host IP address @param router_address - Router IP address @param host_mac - Host MAC address */ define dhcp_compl_event { u32 client_index; u32 pid; u8 hostname[64]; u8 is_ipv6; u8 host_address[16]; u8 router_address[16]; u8 host_mac[6]; }; /** \brief Add MAP domains @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param ip6_prefix - Rule IPv6 prefix @param ip4_prefix - Rule IPv4 prefix @param ip6_src - MAP domain IPv6 BR address / Tunnel source @param ip6_prefix_len - Rule IPv6 prefix length @param ip4_prefix_len - Rule IPv4 prefix length @param ea_bits_len - Embedded Address bits length @param psid_offset - Port Set Identifider (PSID) offset @param psid_length - PSID length @param is_translation - MAP-E / MAP-T @param mtu - MTU */ define map_add_domain { u32 client_index; u32 context; u8 ip6_prefix[16]; u8 ip4_prefix[4]; u8 ip6_src[16]; u8 ip6_prefix_len; u8 ip4_prefix_len; u8 ip6_src_prefix_len; u8 ea_bits_len; u8 psid_offset; u8 psid_length; u8 is_translation; u16 mtu; }; /** \brief Reply for MAP domain add @param context - returned sender context, to match reply w/ request @param index - MAP domain index @param retval - return code */ define map_add_domain_reply { u32 context; u32 index; i32 retval; }; /** \brief Delete MAP domain @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param index - MAP Domain index */ define map_del_domain { u32 client_index; u32 context; u32 index; }; /** \brief Reply for MAP domain del @param context - returned sender context, to match reply w/ request @param retval - return code */ define map_del_domain_reply { u32 context; i32 retval; }; /** \brief Add or Delete MAP rule from a domain (Only used for shared IPv4 per subscriber) @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param index - MAP Domain index @param is_add - If 1 add rule, if 0 delete rule @param ip6_dst - MAP CE IPv6 address @param psid - Rule PSID */ define map_add_del_rule { u32 client_index; u32 context; u32 index; u32 is_add; u8 ip6_dst[16]; u16 psid; }; /** \brief Reply for MAP rule add/del @param context - returned sender context, to match reply w/ request @param retval - return code */ define map_add_del_rule_reply { u32 context; i32 retval; }; /** \brief Get list of map domains @param client_index - opaque cookie to identify the sender */ define map_domain_dump { u32 client_index; u32 context; }; define map_domain_details { u32 context; u32 domain_index; u8 ip6_prefix[16]; u8 ip4_prefix[4]; u8 ip6_src[16]; u8 ip6_prefix_len; u8 ip4_prefix_len; u8 ip6_src_len; u8 ea_bits_len; u8 psid_offset; u8 psid_length; u8 flags; u16 mtu; u8 is_translation; }; define map_rule_dump { u32 client_index; u32 context; u32 domain_index; }; define map_rule_details { u32 context; u8 ip6_dst[16]; u16 psid; }; /** \brief Request for a single block of summary stats @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define map_summary_stats { u32 client_index; u32 context; }; /** \brief Reply for map_summary_stats request @param context - sender context, to match reply w/ request @param retval - return code for request @param total_bindings - @param total_pkts - @param total_ip4_fragments - @param total_security_check - */ define map_summary_stats_reply { u32 context; i32 retval; u64 total_bindings; u64 total_pkts[2]; u64 total_bytes[2]; u64 total_ip4_fragments; u64 total_security_check[2]; }; /** \brief cop: enable/disable junk filtration features on an interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_inded - desired interface @param enable_disable - 1 => enable, 0 => disable */ define cop_interface_enable_disable { u32 client_index; u32 context; u32 sw_if_index; u8 enable_disable; }; /** \brief cop: interface enable/disable junk filtration reply @param context - returned sender context, to match reply w/ request @param retval - return code */ define cop_interface_enable_disable_reply { u32 context; i32 retval; }; /** \brief cop: enable/disable whitelist filtration features on an interface Note: the supplied fib_id must match in order to remove the feature! @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface handle, physical interfaces only @param fib_id - fib identifier for the whitelist / blacklist fib @param ip4 - 1 => enable ip4 filtration, 0=> disable ip4 filtration @param ip6 - 1 => enable ip6 filtration, 0=> disable ip6 filtration @param default_cop - 1 => enable non-ip4, non-ip6 filtration 0=> disable it */ define cop_whitelist_enable_disable { u32 client_index; u32 context; u32 sw_if_index; u32 fib_id; u8 ip4; u8 ip6; u8 default_cop; }; /** \brief cop: interface enable/disable junk filtration reply @param context - returned sender context, to match reply w/ request @param retval - return code */ define cop_whitelist_enable_disable_reply { u32 context; i32 retval; }; /** \brief get_node_graph - get a copy of the vpp node graph including the current set of graph arcs. @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define get_node_graph { u32 client_index; u32 context; }; /** \brief get_node_graph_reply @param context - returned sender context, to match reply w/ request @param retval - return code @param reply_in_shmem - result from vlib_node_serialize, in shared memory. Process with vlib_node_unserialize, remember to switch heaps and free the result. */ define get_node_graph_reply { u32 context; i32 retval; u64 reply_in_shmem; }; /** \brief Clear interface statistics @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - index of the interface to clear statistics */ define sw_interface_clear_stats { u32 client_index; u32 context; u32 sw_if_index; }; /** \brief Reply to sw_interface_clear_stats @param context - sender context which was passed in the request @param retval - return code of the set flags request */ define sw_interface_clear_stats_reply { u32 context; i32 retval; }; /** \brief IOAM Trace : Set TRACE profile @param id - profile id @param trace_type - Trace type @param trace_num_elt - Number of nodes in trace path @param trace_ppc - Trace PPC (none/encap/decap) @param trace_tsp - Trace timestamp precision (0-sec,1-ms,2-us,3-ns) @param trace_app_data - Trace application data, can be any 4 bytes @param pow_enable - Proof of Work enabled or not flag @param node_id - Id of this node */ define trace_profile_add { u32 client_index; u32 context; u16 id; u8 trace_type; u8 trace_num_elt; u8 trace_ppc; u8 trace_tsp; u32 trace_app_data; u8 pow_enable; u32 node_id; }; /** \brief Trace profile add / del response @param context - sender context, to match reply w/ request @param retval - return value for request */ define trace_profile_add_reply { u32 context; i32 retval; }; /** \brief IOAM Trace enable trace profile for a flow @param id - id of the trace profile to be applied @param dest_ipv6 - Destination IPv6 address @param prefix_length - prefix mask @param vrf_id - VRF ID @param trace_op - Trace operation (add/mod/del) @param enable - apply/remove the trace profile for the flow */ define trace_profile_apply { u32 client_index; u32 context; u16 id; u8 dest_ipv6[16]; u32 prefix_length; u32 vrf_id; u8 trace_op; u8 enable; }; /** \brief Trace profile apply response @param context - sender context, to match reply w/ request @param retval - return value for request */ define trace_profile_apply_reply { u32 context; i32 retval; }; /** \brief Delete Trace Profile @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param index - MAP Domain index */ define trace_profile_del { u32 client_index; u32 context; u16 id; }; /** \brief Trace profile add / del response @param context - sender context, to match reply w/ request @param retval - return value for request */ define trace_profile_del_reply { u32 context; i32 retval; }; /** \brief Create host-interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param host_if_name - interface name @param hw_addr - interface MAC @param use_random_hw_addr - use random generated MAC */ define af_packet_create { u32 client_index; u32 context; u8 host_if_name[64]; u8 hw_addr[6]; u8 use_random_hw_addr; }; /** \brief Create host-interface response @param context - sender context, to match reply w/ request @param retval - return value for request */ define af_packet_create_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief Delete host-interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param host_if_name - interface name */ define af_packet_delete { u32 client_index; u32 context; u8 host_if_name[64]; }; /** \brief Delete host-interface response @param context - sender context, to match reply w/ request @param retval - return value for request */ define af_packet_delete_reply { u32 context; i32 retval; }; /** \brief Add/del policer @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add policer if non-zero, else delete @param name - policer name @param cir - CIR @param eir - EIR @param cb - Committed Burst @param eb - Excess or Peak Burst @param rate_type - rate type @param round_type - rounding type @param type - policer algorithm @param color_aware - 0=color-blind, 1=color-aware @param conform_action_type - conform action type @param conform_dscp - DSCP for conform mar-and-transmit action @param exceed_action_type - exceed action type @param exceed_dscp - DSCP for exceed mar-and-transmit action @param violate_action_type - violate action type @param violate_dscp - DSCP for violate mar-and-transmit action */ define policer_add_del { u32 client_index; u32 context; u8 is_add; u8 name[64]; u32 cir; u32 eir; u64 cb; u64 eb; u8 rate_type; u8 round_type; u8 type; u8 color_aware; u8 conform_action_type; u8 conform_dscp; u8 exceed_action_type; u8 exceed_dscp; u8 violate_action_type; u8 violate_dscp; }; /** \brief Add/del policer response @param context - sender context, to match reply w/ request @param retval - return value for request @param policer_index - for add, returned index of the new policer */ define policer_add_del_reply { u32 context; i32 retval; u32 policer_index; }; /** \brief Get list of policers @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param match_name_valid - if 0 request all policers otherwise use match_name @param match_name - policer name */ define policer_dump { u32 client_index; u32 context; u8 match_name_valid; u8 match_name[64]; }; /** \brief Policer operational state response. @param context - sender context, to match reply w/ request @param name - policer name @param cir - CIR @param eir - EIR @param cb - Committed Burst @param eb - Excess or Peak Burst @param rate_type - rate type @param round_type - rounding type @param type - policer algorithm @param conform_action_type - conform action type @param conform_dscp - DSCP for conform mar-and-transmit action @param exceed_action_type - exceed action type @param exceed_dscp - DSCP for exceed mar-and-transmit action @param violate_action_type - violate action type @param violate_dscp - DSCP for violate mar-and-transmit action @param single_rate - 1 = single rate policer, 0 = two rate policer @param color_aware - for hierarchical policing @param scale - power-of-2 shift amount for lower rates @param cir_tokens_per_period - number of tokens for each period @param pir_tokens_per_period - number of tokens for each period for 2-rate policer @param current_limit - current limit @param current_bucket - current bucket @param extended_limit - extended limit @param extended_bucket - extended bucket @param last_update_time - last update time */ define policer_details { u32 context; u8 name[64]; u32 cir; u32 eir; u64 cb; u64 eb; u8 rate_type; u8 round_type; u8 type; u8 conform_action_type; u8 conform_dscp; u8 exceed_action_type; u8 exceed_dscp; u8 violate_action_type; u8 violate_dscp; u8 single_rate; u8 color_aware; u32 scale; u32 cir_tokens_per_period; u32 pir_tokens_per_period; u32 current_limit; u32 current_bucket; u32 extended_limit; u32 extended_bucket; u64 last_update_time; }; /** \brief Set/unset policer classify interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - interface to set/unset policer classify @param ip4_table_index - ip4 classify table index (~0 for skip) @param ip6_table_index - ip6 classify table index (~0 for skip) @param l2_table_index - l2 classify table index (~0 for skip) @param is_add - Set if non-zero, else unset Note: User is recommeneded to use just one valid table_index per call. (ip4_table_index, ip6_table_index, or l2_table_index) */ define policer_classify_set_interface { u32 client_index; u32 context; u32 sw_if_index; u32 ip4_table_index; u32 ip6_table_index; u32 l2_table_index; u8 is_add; }; /** \brief Set/unset policer classify interface response @param context - sender context, to match reply w/ request @param retval - return value for request */ define policer_classify_set_interface_reply { u32 context; i32 retval; }; /** \brief Get list of policer classify interfaces and tables @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param type - classify table type */ define policer_classify_dump { u32 client_index; u32 context; u8 type; }; /** \brief Policer iclassify operational state response. @param context - sender context, to match reply w/ request @param sw_if_index - software interface index @param table_index - classify table index */ define policer_classify_details { u32 context; u32 sw_if_index; u32 table_index; }; /** \brief Create netmap @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param netmap_if_name - interface name @param hw_addr - interface MAC @param use_random_hw_addr - use random generated MAC @param is_pipe - is pipe @param is_master - 0=slave, 1=master */ define netmap_create { u32 client_index; u32 context; u8 netmap_if_name[64]; u8 hw_addr[6]; u8 use_random_hw_addr; u8 is_pipe; u8 is_master; }; /** \brief Create netmap response @param context - sender context, to match reply w/ request @param retval - return value for request */ define netmap_create_reply { u32 context; i32 retval; }; /** \brief Delete netmap @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param netmap_if_name - interface name */ define netmap_delete { u32 client_index; u32 context; u8 netmap_if_name[64]; }; /** \brief Delete netmap response @param context - sender context, to match reply w/ request @param retval - return value for request */ define netmap_delete_reply { u32 context; i32 retval; }; /** \brief Dump mpls gre tunnel table @param client_index - opaque cookie to identify the sender @param tunnel_index - gre tunnel identifier or -1 in case of all tunnels */ define mpls_gre_tunnel_dump { u32 client_index; u32 context; i32 tunnel_index; }; /** \brief mpls gre tunnel operational state response @param tunnel_index - gre tunnel identifier @param intfc_address - interface ipv4 addr @param mask_width - interface ipv4 addr mask @param hw_if_index - interface id @param l2_only - @param tunnel_src - tunnel source ipv4 addr @param tunnel_dst - tunnel destination ipv4 addr @param outer_fib_index - gre tunnel identifier @param encap_index - reference to mpls label table @param nlabels - number of resolved labels @param labels - resolved labels */ define mpls_gre_tunnel_details { u32 context; u32 tunnel_index; u32 intfc_address; u32 inner_fib_index; u32 mask_width; u32 encap_index; u32 hw_if_index; u8 l2_only; u32 tunnel_src; u32 tunnel_dst; u32 outer_fib_index; u32 nlabels; u32 labels[0]; }; /** \brief Dump mpls eth tunnel table @param client_index - opaque cookie to identify the sender @param tunnel_index - eth tunnel identifier or -1 in case of all tunnels */ define mpls_eth_tunnel_dump { u32 client_index; u32 context; i32 tunnel_index; }; /** \brief mpls eth tunnel operational state response @param tunnel_index - eth tunnel identifier @param intfc_address - interface ipv4 addr @param mask_width - interface ipv4 addr mask @param hw_if_index - interface id @param l2_only - @param tunnel_dst_mac - @param tx_sw_if_index - @param encap_index - reference to mpls label table @param nlabels - number of resolved labels @param labels - resolved labels */ define mpls_eth_tunnel_details { u32 context; u32 tunnel_index; u32 intfc_address; u32 inner_fib_index; u32 mask_width; u32 encap_index; u32 hw_if_index; u8 l2_only; u8 tunnel_dst_mac[6]; u32 tx_sw_if_index; u32 nlabels; u32 labels[0]; }; /** \brief Dump mpls fib table @param client_index - opaque cookie to identify the sender @param fib_index - mpls fib entry identifier or -1 in case of all entries */ define mpls_fib_encap_dump { u32 client_index; u32 context; }; /** \brief mpls fib encap table response @param fib_index - fib table id @param dest - destination ipv4 addr @param s_bit - @param entry_index - reference to mpls label table @param nlabels - number of resolved labels @param labels - resolved labels */ define mpls_fib_encap_details { u32 context; u32 fib_index; u32 entry_index; u32 dest; u32 s_bit; u32 nlabels; u32 labels[0]; }; /** \brief Dump mpls fib decap table @param client_index - opaque cookie to identify the sender @param fib_index - mpls fib entry identifier or -1 in case of all entries */ define mpls_fib_decap_dump { u32 client_index; u32 context; }; /** \brief mpls fib decap table response @param fib_index - fib table id @param entry_index - reference to mpls label table @param dest - destination ipv4 addr @param s_bit - @param label - mpls labels @param rx_table_id - rx fib id @param tx_table_id - tx fib id @param swif_tag - */ define mpls_fib_decap_details { u32 context; u32 fib_index; u32 entry_index; u32 dest; u32 s_bit; u32 label; u32 rx_table_id; u32 tx_table_id; u8 swif_tag[8]; }; /** \brief Classify get table IDs request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define classify_table_ids { u32 client_index; u32 context; }; /** \brief Reply for classify get table IDs request @param context - sender context which was passed in the request @param count - number of ids returned in response @param ids - array of classify table ids */ define classify_table_ids_reply { u32 context; i32 retval; u32 count; u32 ids[count]; }; /** \brief Classify table ids by interface index request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_if_index - index of the interface */ define classify_table_by_interface { u32 client_index; u32 context; u32 sw_if_index; }; /** \brief Reply for classify table id by interface index request @param context - sender context which was passed in the request @param count - number of ids returned in response @param sw_if_index - index of the interface @param l2_table_id - l2 classify table index @param ip4_table_id - ip4 classify table index @param ip6_table_id - ip6 classify table index */ define classify_table_by_interface_reply { u32 context; i32 retval; u32 sw_if_index; u32 l2_table_id; u32 ip4_table_id; u32 ip6_table_id; }; /** \brief Classify table info @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param table_id - classify table index */ define classify_table_info { u32 client_index; u32 context; u32 table_id; }; /** \brief Reply for classify table info request @param context - sender context which was passed in the request @param count - number of ids returned in response @param table_id - classify table index @param nbuckets - number of buckets when adding a table @param match_n_vectors - number of match vectors @param skip_n_vectors - number of skip_n_vectors @param active_sessions - number of sessions (active entries) @param next_table_index - index of next table @param miss_next_index - index of miss table @param mask[] - match mask */ define classify_table_info_reply { u32 context; i32 retval; u32 table_id; u32 nbuckets; u32 match_n_vectors; u32 skip_n_vectors; u32 active_sessions; u32 next_table_index; u32 miss_next_index; u32 mask_length; u8 mask[mask_length]; }; /** \brief Classify sessions dump request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param table_id - classify table index */ define classify_session_dump { u32 client_index; u32 context; u32 table_id; }; /** \brief Reply for classify table session dump request @param context - sender context which was passed in the request @param count - number of ids returned in response @param table_id - classify table index @param hit_next_index - hit_next_index of session @param opaque_index - for add, opaque_index of session @param advance - advance value of session @param match[] - match value for session */ define classify_session_details { u32 context; i32 retval; u32 table_id; u32 hit_next_index; i32 advance; u32 opaque_index; u32 match_length; u8 match[match_length]; }; /** \brief Enable and configure IPFIX exporter process request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param collector_address - address of IPFIX collector @param collector_port - port of IPFIX IPFIX collector @param src_address - address of IPFIX exporter @param vrf_id - VRF / fib table ID @param path_mtu - Path MTU between exporter and collector @param template_interval - number of seconds after which to resend template */ define ipfix_enable { u32 client_index; u32 context; u8 collector_address[16]; u16 collector_port; u8 src_address[16]; u32 vrf_id; u32 path_mtu; u32 template_interval; }; /** \brief Reply to IPFIX enable and configure request @param context - sender context which was passed in the request */ define ipfix_enable_reply { u32 context; i32 retval; }; /** \brief IPFIX dump request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request */ define ipfix_dump { u32 client_index; u32 context; }; /** \brief Reply to IPFIX dump request @param context - sender context which was passed in the request @param collector_address - address of IPFIX collector @param collector_port - port of IPFIX IPFIX collector @param src_address - address of IPFIX exporter @param fib_index - fib table index @param path_mtu - Path MTU between exporter and collector @param template_interval - number of seconds after which to resend template */ define ipfix_details { u32 context; u8 collector_address[16]; u16 collector_port; u8 src_address[16]; u32 fib_index; u32 path_mtu; u32 template_interval; }; /** \brief Query relative index via node names @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param node_name - name of node to find relative index from @param next_name - next node from node_name to find relative index of */ define get_next_index { u32 client_index; u32 context; u8 node_name[64]; u8 next_name[64]; }; /** \brief Reply for get next node index @param context - sender context which was passed in the request @param retval - return value @param next_index - index of the next_node */ define get_next_index_reply { u32 context; i32 retval; u32 next_index; }; /** \brief PacketGenerator create interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param interface_id - interface index */ define pg_create_interface { u32 client_index; u32 context; u32 interface_id; }; /** \brief PacketGenerator create interface response @param context - sender context, to match reply w/ request @param retval - return value for request */ define pg_create_interface_reply { u32 context; i32 retval; u32 sw_if_index; }; /** \brief PacketGenerator capture packets on given interface request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param interface_id - pg interface index @param is_enabled - 1 if enabling streams, 0 if disabling @param count - number of packets to be captured @param pcap_file - pacp file name to store captured packets */ define pg_capture { u32 client_index; u32 context; u32 interface_id; u8 is_enabled; u32 count; u32 pcap_name_length; u8 pcap_file_name[pcap_name_length]; }; /** \brief PacketGenerator capture packets response @param context - sender context, to match reply w/ request @param retval - return value for request */ define pg_capture_reply { u32 context; i32 retval; }; /** \brief Enable / disable packet generator request @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_enabled - 1 if enabling streams, 0 if disabling @param stream - stream name to be enable/disabled, if not specified handle all streams */ define pg_enable_disable { u32 client_index; u32 context; u8 is_enabled; u32 stream_name_length; u8 stream_name[stream_name_length]; }; /** \brief Reply for enable / disable packet generator @param context - returned sender context, to match reply w/ request @param retval - return code */ define pg_enable_disable_reply { u32 context; i32 retval; };