From 66ff7c1132a7533d578882c85f9ecf2c20cc1ab3 Mon Sep 17 00:00:00 2001 From: Thomas F Herbert Date: Mon, 4 Jun 2018 12:55:27 -0400 Subject: Build 17.11, 18.02 and 18.05 Use modified spec file from Fedora dpdk-17.11.2-1.fc28 Change-Id: Ic0ddb2405820c7b7e65cb7f517c77ecdda68090a Signed-off-by: Thomas F Herbert --- build/.gitignore | 1 + build/build.sh | 64 ++-- build/build_dpdk_rpm.sh | 43 +-- build/clean.sh | 5 - build/dpdk-snap/dpdk.1802.spec | 494 ++++++++++++++++++++++++++++ build/dpdk-snap/dpdk.spec | 709 +++++++++++++---------------------------- 6 files changed, 745 insertions(+), 571 deletions(-) create mode 100644 build/.gitignore create mode 100644 build/dpdk-snap/dpdk.1802.spec (limited to 'build') diff --git a/build/.gitignore b/build/.gitignore new file mode 100644 index 0000000..1377554 --- /dev/null +++ b/build/.gitignore @@ -0,0 +1 @@ +*.swp diff --git a/build/build.sh b/build/build.sh index 34ba900..d3733a9 100755 --- a/build/build.sh +++ b/build/build.sh @@ -15,67 +15,43 @@ # limitations under the License. set -e -echo =============================16.07================================ -echo "Build DPDK RPM for 16.07 release" -./build_dpdk_rpm.sh -g 16.07 -echo =============================16.11================================ -echo "Build DPDK RPM for 16.11 release" +CLEAN=yes -./build_dpdk_rpm.sh -g 16.11 -p yes -echo "Build DPDK SRPM for 16.11 release" +echo =============================17.11================================ +echo "Build DPDK RPM for 17.11 release" -./build_dpdk_rpm.sh -g 16.11 -p yes -s yes +./build_dpdk_rpm.sh -g 17.11 -echo =============================17.02================================ -echo "Build DPDK RPM for 17.02 release" +echo "Build DPDK SRPM for 17.11 release" -./build_dpdk_rpm.sh -g 17.02 +./build_dpdk_rpm.sh -g 17.11 -s yes -echo "Build DPDK SRPM for 17.02 release" +echo =============================18.02================================ +echo "Build DPDK RPM for 18.02 release" -./build_dpdk_rpm.sh -g 17.02 -s yes +./build_dpdk_rpm.sh -g 18.02 -echo "Build DPDK RPM from snapshot of master" +echo "Build DPDK SRPM for 18.02 release" -echo =============================17.05================================ -echo "Build DPDK RPM for 17.05 release" +./build_dpdk_rpm.sh -g 18.02 -s yes -./build_dpdk_rpm.sh -g 17.05 +echo =============================18.05================================ +echo "Build DPDK RPM for 18.05 release" -echo "Build DPDK SRPM for 17.05 release" +./build_dpdk_rpm.sh -g 18.05 -./build_dpdk_rpm.sh -g 17.05 -s yes +echo "Build DPDK SRPM for 18.05 release" -echo =============================17.08-rc1================================ -echo "Build DPDK RPM for 17.08-rc1 release" +./build_dpdk_rpm.sh -g 18.05 -s yes -./build_dpdk_rpm.sh -g 17.08-rc1 -echo "Build DPDK SRPM for 17.08-rc1 release" +if [[ -z "${CLEAN##*y*}" ]]; then + echo =============================Clean up temporary directories================================ + ./clean.sh +fi -./build_dpdk_rpm.sh -g 17.08-rc1 -s yes - -echo =============================17.08-rc2================================ -echo "Build DPDK RPM for 17.08-rc2 release" - -./build_dpdk_rpm.sh -g 17.08-rc2 - -echo "Build DPDK SRPM for 17.08-rc2 release" - -./build_dpdk_rpm.sh -g 17.08-rc2 -s yes - -echo =============================Current master================================ -echo "Build DPDK RPM from snapshot of master" -./build_dpdk_rpm.sh -g master - -echo "Build DPDK SRPM from snapshot of master" -./build_dpdk_rpm.sh -g master -s yes - - -echo =============================Clean up temporary directories================================ -./clean.sh exit 0 diff --git a/build/build_dpdk_rpm.sh b/build/build_dpdk_rpm.sh index 4123325..f306792 100755 --- a/build/build_dpdk_rpm.sh +++ b/build/build_dpdk_rpm.sh @@ -21,14 +21,13 @@ echo executing $0 $@ echo executing on machine `uname -a` usage() { - echo "$0 -g < [master] | [tag] | [commit] > -h -k -p < URL > \ - -u < URL > -v \ - \ - -g -- DPDK release tag commit to build. The default is \ - master. \ - -k -- Build igb_uio kernel module \ - -h -- print this message \ - -p -- Specify url to patches if required for ovs rpm. \ + echo "$0 -g < [master] | [tag] | [commit] > -h -k -p < URL > -u < URL > -v + + -g -- DPDK release tag commit to build. The default is + master. + -k -- Build igb_uio kernel module + -h -- print this message + -p -- Specify url to patches if required for ovs rpm. -v -- Set verbose mode." } while getopts "g:hkp:s:u:v" opt; do @@ -94,16 +93,13 @@ mkdir -p $RPMDIR/SRPMS cd $TMPDIR -if [ ! -d dpdk ]; then - git clone $DPDK_REPO_URL - cd dpdk -else - cd dpdk +if [ -d dpdk ]; then set +e - make clean - rm *.gz + rm -rf dpdk set -e fi +git clone $DPDK_REPO_URL +cd dpdk if [[ "$DPDK_VERSION" =~ "master" ]]; then git checkout master @@ -116,7 +112,6 @@ if [[ "$DPDK_VERSION" =~ "rc" ]]; then DPDK_VERSION=`echo $DPDK_VERSION | sed -e 's/-/_/'` fi -cp $HOME/dpdk-snap/* $RPMDIR/SOURCES snapser=`git log --pretty=oneline | wc -l` makever=`make showversion` @@ -133,15 +128,9 @@ elif [ ! -z "$rc" ]; then cp $HOME/dpdk-snap/dpdk.spec $TMPDIR/dpdk/dpdk.spec else prefix=dpdk-${basever:0:5} - if [[ "$DPDK_PATCH" =~ "yes" && "$DPDK_VERSION" =~ "16.11" ]]; then - echo "----------------------------------------------" - echo "Copy applicable patches." - echo cp $TOPDIR/patches/$DPDK_VERSION/* $RPMDIR/SOURCES - cp $TOPDIR/patches/$DPDK_VERSION/* $RPMDIR/SOURCES - cp $HOME/dpdk-snap/dpdk.1611.spec $TMPDIR/dpdk/dpdk.spec - elif [[ "$DPDK_VERSION" =~ "16.07" ]]; then - cp $HOME/dpdk-snap/dpdk.1607.spec $TMPDIR/dpdk/dpdk.spec - else + if [[ "$DPDK_VERSION" =~ "18" ]]; then + cp $HOME/dpdk-snap/dpdk.1802.spec $TMPDIR/dpdk/dpdk.spec + else #1711 cp $HOME/dpdk-snap/dpdk.spec $TMPDIR/dpdk/dpdk.spec fi fi @@ -184,17 +173,17 @@ if [[ "$DPDK_VERSION" =~ "master" ]]; then else rpmbuild "${BUILD_OPT[@]}" --define "_topdir $RPMDIR" --define "_ver $DPDK_VERSION" dpdk.spec fi - # # Copy all RPMs to build directory # echo Copy all RPMs to build directory cd $RPMDIR -RPMS=$(find . -type f -iname '*.rpm') +RPMS=$(find . -type f -name '*.rpm') SRCRPMS=$(find . -type f -name '*.src.rpm') for i in $RPMS $SRCRPMS do cp $i $HOME done + exit 0 diff --git a/build/clean.sh b/build/clean.sh index b24f974..7acd462 100755 --- a/build/clean.sh +++ b/build/clean.sh @@ -26,8 +26,3 @@ if [ -d $TMPDIR ] then rm -rf $TMPDIR fi - -if [ -d $TOPDIR/rpmbuild ] -then - rm -rf rpmbuild -fi diff --git a/build/dpdk-snap/dpdk.1802.spec b/build/dpdk-snap/dpdk.1802.spec new file mode 100644 index 0000000..cacf909 --- /dev/null +++ b/build/dpdk-snap/dpdk.1802.spec @@ -0,0 +1,494 @@ +# Add option to build as static libraries (--without shared) +%bcond_without shared +# Add option to build without examples +%bcond_without examples +# Add option to build without tools +%bcond_without tools + +# Dont edit Version: and Release: directly, only these: +%define ver %{?_ver} +%define rel 1 +# Define when building git snapshots + +%define srcver %{ver}%{?_snapver:.%{_snapver}} + +# Add option to build the PDF documentation separately (--with pdfdoc) +%bcond_with pdfdoc + +Name: dpdk +Version: %{ver} +Release:%{?_snapver:%{_snapver}.}%{rel}%{?dist} +Epoch: 2 +URL: http://dpdk.org +Source: http://dpdk.org/browse/dpdk/snapshot/dpdk-%{srcver}.tar.gz + +Summary: Set of libraries and drivers for fast packet processing + +# +# Note that, while this is dual licensed, all code that is included with this +# Pakcage are BSD licensed. The only files that aren't licensed via BSD is the +# kni kernel module which is dual LGPLv2/BSD, and thats not built for fedora. +# +License: BSD and LGPLv2 and GPLv2 + +# +# The DPDK is designed to optimize througput of network traffic using, among +# other techniques, carefully crafted assembly instructions. As such it +# needs extensive work to port it to other architectures. +# +ExclusiveArch: x86_64 i686 aarch64 ppc64le + +# machine_arch maps between rpm and dpdk arch name, often same as _target_cpu +# machine_tmpl is the config template machine name, often "native" +# machine is the actual machine name used in the dpdk make system +%ifarch x86_64 +%define machine_arch x86_64 +%define machine_tmpl native +%define machine default +%endif +%ifarch i686 +%define machine_arch i686 +%define machine_tmpl native +%define machine default +%endif +%ifarch aarch64 +%define machine_arch arm64 +%define machine_tmpl armv8a +%define machine armv8a +%endif +%ifarch ppc64le +%define machine_arch ppc_64 +%define machine_tmpl power8 +%define machine power8 +%endif + + +%define target %{machine_arch}-%{machine_tmpl}-linuxapp-gcc + +BuildRequires: gcc +BuildRequires: kernel-headers, libpcap-devel, doxygen, zlib-devel +%if 0%{?fedora} >= 25 +BuildRequires: python3-sphinx +%else +BuildRequires: python-sphinx +%endif +BuildRequires: numactl-devel +%if %{with pdfdoc} +BuildRequires: texlive-dejavu inkscape texlive-latex-bin-bin +BuildRequires: texlive-kpathsea-bin texlive-metafont-bin texlive-cm +BuildRequires: texlive-cmap texlive-ec texlive-babel-english +BuildRequires: texlive-fancyhdr texlive-fancybox texlive-titlesec BuildRequires: texlive-framed texlive-threeparttable texlive-mdwtools +BuildRequires: texlive-wrapfig texlive-parskip texlive-upquote texlive-multirow +BuildRequires: texlive-helvetic texlive-times texlive-dvips +%endif + +%description +The Data Plane Development Kit is a set of libraries and drivers for +fast packet processing in the user space. + +%package devel +Summary: Data Plane Development Kit development files +Requires: %{name}%{?_isa} = %{epoch}:%{version}-%{release} +%if ! %{with shared} +Provides: %{name}-static = %{epoch}:%{version}-%{release} +%endif + +%description devel +This package contains the headers and other files needed for developing +applications with the Data Plane Development Kit. + +%package doc +Summary: Data Plane Development Kit API documentation +BuildArch: noarch + +%description doc +API programming documentation for the Data Plane Development Kit. + +%if %{with tools} +%package tools +Summary: Tools for setting up Data Plane Development Kit environment +Requires: %{name} = %{epoch}:%{version}-%{release} +Requires: kmod pciutils findutils iproute + +%if 0%{?fedora} >= 25 +Requires: python3-pyelftools +%endif +%description tools +%{summary} +%endif + +%if %{with examples} +%package examples +Summary: Data Plane Development Kit example applications +BuildRequires: libvirt-devel + +%description examples +Example applications utilizing the Data Plane Development Kit, such +as L2 and L3 forwarding. +%endif + +%define sdkdir %{_datadir}/%{name} +%define docdir %{_docdir}/%{name} +%define incdir %{_includedir}/%{name} +%define pmddir %{_libdir}/%{name}-pmds + +%prep +%setup -q -n dpdk-%{version} +#%patch0 -p1 + +%build +# set up a method for modifying the resulting .config file +function setconf() { + if grep -q ^$1= %{target}/.config; then + sed -i "s:^$1=.*$:$1=$2:g" %{target}/.config + else + echo $1=$2 >> %{target}/.config + fi +} + +# In case dpdk-devel is installed, we should ignore its hints about the SDK directories +unset RTE_SDK RTE_INCLUDE RTE_TARGET + +# Note: _hardening_ldflags has to go on the extra cflags line because dpdk is +# astoundingly convoluted in how it processes its linker flags. Fixing it in +# dpdk is the preferred solution, but adjusting to allow a gcc option in the +# ldflags, even when gcc is used as the linker, requires large tree-wide changes +export EXTRA_CFLAGS="$(echo %{optflags} | sed -e 's:-Wall::g' -e 's:-march=[[:alnum:]]* ::g') -Wformat -fPIC %{_hardening_ldflags}" +export EXTRA_LDFLAGS=$(echo %{__global_ldflags} | sed -e's/-Wl,//g' -e's/-spec.*//') +export HOST_EXTRA_CFLAGS=$EXTRA_CFLAGS +export EXTRA_HOST_LDFLAGS=$(echo %{__global_ldflags} | sed -e's/-spec.*//') + +# DPDK defaults to using builder-specific compiler flags. However, +# the config has been changed by specifying CONFIG_RTE_MACHINE=default +# in order to build for a more generic host. NOTE: It is possible that +# the compiler flags used still won't work for all Fedora-supported +# machines, but runtime checks in DPDK will catch those situations. +make V=1 O=%{target} T=%{target} %{?_smp_mflags} config + +setconf CONFIG_RTE_MACHINE '"%{machine}"' +# Disable experimental features +setconf CONFIG_RTE_NEXT_ABI n +setconf CONFIG_RTE_LIBRTE_MBUF_OFFLOAD n +# Disable unmaintained features +setconf CONFIG_RTE_LIBRTE_POWER n + +# Enable automatic driver loading from this path +setconf CONFIG_RTE_EAL_PMD_PATH '"%{pmddir}"' + +setconf CONFIG_RTE_LIBRTE_BNX2X_PMD y +setconf CONFIG_RTE_LIBRTE_PMD_PCAP y +setconf CONFIG_RTE_LIBRTE_VHOST_NUMA y + +setconf CONFIG_RTE_EAL_IGB_UIO n +setconf CONFIG_RTE_LIBRTE_KNI n +setconf CONFIG_RTE_KNI_KMOD n +setconf CONFIG_RTE_KNI_PREEMPT_DEFAULT n + +setconf CONFIG_RTE_APP_EVENTDEV n + +setconf CONFIG_RTE_LIBRTE_NFP_PMD y + +%ifarch aarch64 +setconf CONFIG_RTE_LIBRTE_DPAA_BUS n +setconf CONFIG_RTE_LIBRTE_DPAA_MEMPOOL n +setconf CONFIG_RTE_LIBRTE_DPAA_PMD n +%endif + +%if %{with shared} +setconf CONFIG_RTE_BUILD_SHARED_LIB y +%endif + +make V=1 O=%{target} %{?_smp_mflags} -Wimplicit-fallthrough=0 +make V=1 O=%{target} %{?_smp_mflags} doc-api-html doc-guides-html %{?with_pdfdoc: guides-pdf} + +%if %{with examples} +make V=1 O=%{target}/examples T=%{target} %{?_smp_mflags} examples +%endif + +%install +# In case dpdk-devel is installed +unset RTE_SDK RTE_INCLUDE RTE_TARGET + +%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir} + +%if ! %{with tools} +rm -rf %{buildroot}%{sdkdir}/usertools +rm -rf %{buildroot}%{_sbindir}/dpdk_nic_bind +rm -rf %{buildroot}%{_bindir}/dpdk-test-crypto-perf +%endif +rm -f %{buildroot}%{sdkdir}/usertools/dpdk-setup.sh + +%if %{with examples} +find %{target}/examples/ -name "*.map" | xargs rm -f +for f in %{target}/examples/*/%{target}/app/*; do + bn=`basename ${f}` + cp -p ${f} %{buildroot}%{_bindir}/dpdk_example_${bn} +done +%endif + +%if 0%{?fedora} >= 25 +# Replace /usr/bin/env python with /usr/bin/python3 +find %{buildroot}%{sdkdir}/ -name "*.py" -exec \ + sed -i -e 's|#!\s*/usr/bin/env python|#!/usr/bin/python3|' {} + +%endif + +# Create a driver directory with symlinks to all pmds +mkdir -p %{buildroot}/%{pmddir} +for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do + bn=$(basename ${f}) + ln -s ../${bn} %{buildroot}%{pmddir}/${bn} +done + +# Setup RTE_SDK environment as expected by apps etc +mkdir -p %{buildroot}/%{_sysconfdir}/profile.d +cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh +if [ -z "\${RTE_SDK}" ]; then + export RTE_SDK="%{sdkdir}" + export RTE_TARGET="%{target}" + export RTE_INCLUDE="%{incdir}" +fi +EOF + +cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.csh +if ( ! \$RTE_SDK ) then + setenv RTE_SDK "%{sdkdir}" + setenv RTE_TARGET "%{target}" + setenv RTE_INCLUDE "%{incdir}" +endif +EOF + +# Fixup target machine mismatch +sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk* + +%files +# BSD +%{_bindir}/testpmd +%{_bindir}/dpdk-procinfo +%if %{with shared} +%{_libdir}/*.so.* +%{pmddir}/ +%endif + +%files doc +#BSD +%{docdir} + +%files devel +#BSD +%{incdir}/ +%{sdkdir} +%if %{with tools} +%exclude %{sdkdir}/usertools/ +%endif +%if %{with examples} +%exclude %{sdkdir}/examples/ +%endif +%{_sysconfdir}/profile.d/dpdk-sdk-*.* +%if ! %{with shared} +%{_libdir}/*.a +%else +%{_libdir}/*.so +%endif + +%if %{with tools} +%files tools +%{sdkdir}/usertools/ +%{_sbindir}/dpdk-devbind +%{_bindir}/dpdk-pdump +%{_bindir}/dpdk-pmdinfo +%{_bindir}/dpdk-test-crypto-perf +%{_bindir}/testbbdev +%endif + +%if %{with examples} +%files examples +%{_bindir}/dpdk_example_* +%doc %{sdkdir}/examples +%endif + +%changelog +* Wed Jun 6 2018 Thomas F Herbert - 18.02-1 +- Include testbbdev + +* Mon Jun 4 2018 Thomas F Herbert - 17.11.2-2 +- Backport changes from Fedora 28 17.11.2-1.f28 +- Remove dependency on Python3 for Centos + +* Tue Apr 24 2018 Neil Horman - 2:17.11.2-1 +- Update to latest 17.11 LTS (fixes bz 1571352) + +* Tue Apr 10 2018 Timothy Redaelli - 2:17.11.1-2 +- Fix Requires dpdk by adding epoch (bz 1564215) + +* Mon Apr 09 2018 Neil Horman - 17.11.1-1 +- sync rawhide updates (including LTS shift) with f28 (bz 1564215) + +* Thu Apr 05 2018 Neil Horman - 18.02-6 +- Remove some debug checks (bz 1548404) + +* Thu Apr 05 2018 Neil Horman - 18.02-5 +- Fix compiler flag error (bz 1548404) + +* Tue Mar 20 2018 Neil Horman - 18.02-4 +- Update ldflags (bz 1548404) +- bump release to keep it in line with rawhide + +* Fri Mar 02 2018 Neil Horman - 18.02-2 +- update to latest upstream (bz 1550708) + +* Wed Feb 07 2018 Fedora Release Engineering - 17.11-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild + +* Wed Jan 03 2018 Iryna Shcherbina - 17.11-3 +- Update Python 2 dependency declarations to new packaging standards + (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3) + +* Thu Nov 30 2017 Neil Horman - 17.11-2 +- Fix dangling symlinks (bz 1519322) +- Fix devtools->usertools conversion (bz 1519332) +- Fix python-pyelftools requirement (bz 1519336) + +* Thu Nov 16 2017 Neil Horman - 17.11-1 +- Update to latest upstream + +* Wed Aug 09 2017 Neil Horman - 17.08-1 +- Update to latest upstream + +* Mon Jul 31 2017 Neil Horman - 17.05-2 +- backport rte_eth_tx_done_cleanup map fix (#1476341) + +* Wed Jul 26 2017 Fedora Release Engineering - 17.05-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild + +* Mon May 15 2017 Neil Horman - 17.05-1 +- Update to latest upstream + +* Fri Feb 24 2017 Neil Horman - 17-02-2 +- Add python dependency (#1426561) + +* Wed Feb 15 2017 Fedora Release Monitoring - 17.02-1 +- Update to 17.02 (#1422285) + +* Mon Feb 06 2017 Yaakov Selkowitz - 16.11-2 +- Enable aarch64, ppc64le (#1419731) + +* Tue Nov 15 2016 Neil Horman - 16.11-1 +- Update to 16.11 + +* Tue Aug 02 2016 Neil Horman - 16.07-1 +* Update to 16.07 + +* Thu Apr 14 2016 Panu Matilainen - 16.04-1 +- Update to 16.04 +- Drop all patches, they're not needed anymore +- Drop linker script generation, its upstream now +- Enable vhost numa support again + +* Wed Mar 16 2016 Panu Matilainen - 2.2.0-7 +- vhost numa code causes crashes, disable until upstream fixes +- Generalize target/machine/etc macros to enable i686 builds + +* Tue Mar 01 2016 Panu Matilainen - 2.2.0-6 +- Drop no longer needed bnx2x patch, the gcc false positive has been fixed +- Drop no longer needed -Wno-error=array-bounds from CFLAGS +- Eliminate the need for the enic patch by eliminating second -Wall from CFLAGS +- Disable unmaintained librte_power as per upstream recommendation + +* Mon Feb 15 2016 Neil Horman 2.2.0-5 +- Fix ftbfs isssue (1307431) + +* Wed Feb 03 2016 Fedora Release Engineering - 2.2.0-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild + +* Tue Jan 26 2016 Panu Matilainen - 2.2.0-3 +- Use a different quoting method to avoid messing up vim syntax highlighting +- A string is expected as CONFIG_RTE_MACHINE value, quote it too + +* Mon Jan 25 2016 Panu Matilainen - 2.2.0-2 +- Enable librte_vhost NUMA-awareness + +* Wed Jan 20 2016 Panu Matilainen - 2.2.0-1 +- Update to 2.2.0 +- Establish a driver directory for automatic driver loading +- Move the unversioned pmd symlinks from libdir -devel +- Make option matching stricter in spec setconf +- Spec cleanups +- Adopt upstream standard installation layout + +* Thu Oct 22 2015 Aaron Conole - 2.1.0-3 +- Include examples binaries +- Enable the Broadcom NetXtreme II 10Gb PMD +- Fix up linkages for the dpdk-devel package + +* Wed Sep 30 2015 Aaron Conole - 2.1.0-2 +- Re-enable the IGB, IXGBE, I40E PMDs +- Bring the Fedora and RHEL packages more in-line. + +* Wed Aug 26 2015 Neil Horman - 2.1.0-1 +- Update to latest version + +* Wed Jun 17 2015 Fedora Release Engineering - 2.0.0-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild + +* Mon Apr 06 2015 Neil Horman - 2.0.0-1 +- Update to dpdk 2.0 +- converted --with shared option to --without shared option + +* Wed Jan 28 2015 Panu Matilainen - 1.7.0-8 +- Always build with -fPIC + +* Wed Jan 28 2015 Panu Matilainen - 1.7.0-7 +- Policy compliance: move static libraries to -devel, provide dpdk-static +- Add a spec option to build as shared libraries + +* Wed Jan 28 2015 Panu Matilainen - 1.7.0-6 +- Avoid variable expansion in the spec here-documents during build +- Drop now unnecessary debug flags patch +- Add a spec option to build a combined library + +* Tue Jan 27 2015 Panu Matilainen - 1.7.0-5 +- Avoid unnecessary use of %%global, lazy expansion is normally better +- Drop unused destdir macro while at it +- Arrange for RTE_SDK environment + directory layout expected by DPDK apps +- Drop config from main package, it shouldn't be needed at runtime + +* Tue Jan 27 2015 Panu Matilainen - 1.7.0-4 +- Copy the headers instead of broken symlinks into -devel package +- Force sane mode on the headers +- Avoid unnecessary %%exclude by not copying unpackaged content to buildroot +- Clean up summaries and descriptions +- Drop unnecessary kernel-devel BR, we are not building kernel modules + +* Sat Aug 16 2014 Fedora Release Engineering - 1.7.0-3 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild + +* Thu Jul 17 2014 - John W. Linville - 1.7.0-2 +- Use EXTRA_CFLAGS to include standard Fedora compiler flags in build +- Set CONFIG_RTE_MACHINE=default to build for least-common-denominator machines +- Turn-off build of librte_acl, since it does not build on default machines +- Turn-off build of physical device PMDs that require kernel support +- Clean-up the install rules to match current packaging +- Correct changelog versions 1.0.7 -> 1.7.0 +- Remove ix86 from ExclusiveArch -- it does not build with above changes + +* Thu Jul 10 2014 - Neil Horman - 1.7.0-1.0 +- Update source to official 1.7.0 release + +* Thu Jul 03 2014 - Neil Horman +- Fixing up release numbering + +* Tue Jul 01 2014 - Neil Horman - 1.7.0-0.9.1.20140603git5ebbb1728 +- Fixed some build errors (empty debuginfo, bad 32 bit build) + +* Wed Jun 11 2014 - Neil Horman - 1.7.0-0.9.20140603git5ebbb1728 +- Fix another build dependency + +* Mon Jun 09 2014 - Neil Horman - 1.7.0-0.8.20140603git5ebbb1728 +- Fixed doc arch versioning issue + +* Mon Jun 09 2014 - Neil Horman - 1.7.0-0.7.20140603git5ebbb1728 +- Added verbose output to build + +* Tue May 13 2014 - Neil Horman - 1.7.0-0.6.20140603git5ebbb1728 +- Initial Build + diff --git a/build/dpdk-snap/dpdk.spec b/build/dpdk-snap/dpdk.spec index 72f0b70..c140654 100644 --- a/build/dpdk-snap/dpdk.spec +++ b/build/dpdk-snap/dpdk.spec @@ -12,15 +12,16 @@ %define srcver %{ver}%{?_snapver:.%{_snapver}} +# Add option to build the PDF documentation separately (--with pdfdoc) +%bcond_with pdfdoc + Name: dpdk Version: %{ver} -Release: %{?_snapver:%{_snapver}.}%{rel}%{?dist} +Release:%{?_snapver:%{_snapver}.}%{rel}%{?dist} +Epoch: 2 URL: http://dpdk.org Source: http://dpdk.org/browse/dpdk/snapshot/dpdk-%{srcver}.tar.gz -# Only needed for creating snapshot tarballs, not used in build itself -Source100: dpdk-snapshot.sh - Summary: Set of libraries and drivers for fast packet processing # @@ -32,31 +33,54 @@ License: BSD and LGPLv2 and GPLv2 # # The DPDK is designed to optimize througput of network traffic using, among -# other techniques, carefully crafted x86 assembly instructions. As such it -# currently (and likely never will) run on non-x86 platforms. -ExclusiveArch: x86_64 i686 +# other techniques, carefully crafted assembly instructions. As such it +# needs extensive work to port it to other architectures. +# +ExclusiveArch: x86_64 i686 aarch64 ppc64le # machine_arch maps between rpm and dpdk arch name, often same as _target_cpu -%define machine_arch %{_target_cpu} # machine_tmpl is the config template machine name, often "native" -%define machine_tmpl native # machine is the actual machine name used in the dpdk make system %ifarch x86_64 +%define machine_arch x86_64 +%define machine_tmpl native %define machine default %endif %ifarch i686 -%define machine atm +%define machine_arch i686 +%define machine_tmpl native +%define machine default +%endif +%ifarch aarch64 +%define machine_arch arm64 +%define machine_tmpl armv8a +%define machine armv8a +%endif +%ifarch ppc64le +%define machine_arch ppc_64 +%define machine_tmpl power8 +%define machine power8 %endif -%define target %{machine_arch}-%{machine_tmpl}-linuxapp-gcc -%define sdkdir %{_datadir}/%{name} -%define docdir %{_docdir}/%{name} -%define incdir %{_includedir}/%{name} -%define pmddir %{_libdir}/%{name}-pmds +%define target %{machine_arch}-%{machine_tmpl}-linuxapp-gcc -BuildRequires: kernel-headers, libpcap-devel, zlib-devel, numactl-devel -BuildRequires: doxygen, python-sphinx, git +BuildRequires: gcc +BuildRequires: kernel-headers, libpcap-devel, doxygen, zlib-devel +%if 0%{?fedora} >= 25 +BuildRequires: python3-sphinx +%else +BuildRequires: python-sphinx +%endif +BuildRequires: numactl-devel +%if %{with pdfdoc} +BuildRequires: texlive-dejavu inkscape texlive-latex-bin-bin +BuildRequires: texlive-kpathsea-bin texlive-metafont-bin texlive-cm +BuildRequires: texlive-cmap texlive-ec texlive-babel-english +BuildRequires: texlive-fancyhdr texlive-fancybox texlive-titlesec BuildRequires: texlive-framed texlive-threeparttable texlive-mdwtools +BuildRequires: texlive-wrapfig texlive-parskip texlive-upquote texlive-multirow +BuildRequires: texlive-helvetic texlive-times texlive-dvips +%endif %description The Data Plane Development Kit is a set of libraries and drivers for @@ -64,9 +88,9 @@ fast packet processing in the user space. %package devel Summary: Data Plane Development Kit development files -Requires: %{name}%{?_isa} = %{version}-%{release} +Requires: %{name}%{?_isa} = %{epoch}:%{version}-%{release} %if ! %{with shared} -Provides: %{name}-static = %{version}-%{release} +Provides: %{name}-static = %{epoch}:%{version}-%{release} %endif %description devel @@ -83,8 +107,12 @@ API programming documentation for the Data Plane Development Kit. %if %{with tools} %package tools Summary: Tools for setting up Data Plane Development Kit environment +Requires: %{name} = %{epoch}:%{version}-%{release} Requires: kmod pciutils findutils iproute +%if 0%{?fedora} >= 25 +Requires: python3-pyelftools +%endif %description tools %{summary} %endif @@ -99,54 +127,79 @@ Example applications utilizing the Data Plane Development Kit, such as L2 and L3 forwarding. %endif +%define sdkdir %{_datadir}/%{name} +%define docdir %{_docdir}/%{name} +%define incdir %{_includedir}/%{name} +%define pmddir %{_libdir}/%{name}-pmds + %prep -%autosetup -n %{name}-%{srcver} -S git_am +%setup -q -n dpdk-%{version} +#%patch0 -p1 %build -function setconf() -{ - cf=%{target}/.config - if grep -q ^$1= $cf; then - sed -i "s:^$1=.*$:$1=$2:g" $cf - else - echo $1=$2 >> $cf - fi +# set up a method for modifying the resulting .config file +function setconf() { + if grep -q ^$1= %{target}/.config; then + sed -i "s:^$1=.*$:$1=$2:g" %{target}/.config + else + echo $1=$2 >> %{target}/.config + fi } -# In case dpdk-devel is installed + +# In case dpdk-devel is installed, we should ignore its hints about the SDK directories unset RTE_SDK RTE_INCLUDE RTE_TARGET +# Note: _hardening_ldflags has to go on the extra cflags line because dpdk is +# astoundingly convoluted in how it processes its linker flags. Fixing it in +# dpdk is the preferred solution, but adjusting to allow a gcc option in the +# ldflags, even when gcc is used as the linker, requires large tree-wide changes +export EXTRA_CFLAGS="$(echo %{optflags} | sed -e 's:-Wall::g' -e 's:-march=[[:alnum:]]* ::g') -Wformat -fPIC %{_hardening_ldflags}" +export EXTRA_LDFLAGS=$(echo %{__global_ldflags} | sed -e's/-Wl,//g' -e's/-spec.*//') +export HOST_EXTRA_CFLAGS=$EXTRA_CFLAGS +export EXTRA_HOST_LDFLAGS=$(echo %{__global_ldflags} | sed -e's/-spec.*//') + +# DPDK defaults to using builder-specific compiler flags. However, +# the config has been changed by specifying CONFIG_RTE_MACHINE=default +# in order to build for a more generic host. NOTE: It is possible that +# the compiler flags used still won't work for all Fedora-supported +# machines, but runtime checks in DPDK will catch those situations. make V=1 O=%{target} T=%{target} %{?_smp_mflags} config -# DPDK defaults to optimizing for the builder host we need generic binaries setconf CONFIG_RTE_MACHINE '"%{machine}"' -setconf CONFIG_RTE_SCHED_VECTOR n +# Disable experimental features +setconf CONFIG_RTE_NEXT_ABI n +setconf CONFIG_RTE_LIBRTE_MBUF_OFFLOAD n +# Disable unmaintained features +setconf CONFIG_RTE_LIBRTE_POWER n # Enable automatic driver loading from this path setconf CONFIG_RTE_EAL_PMD_PATH '"%{pmddir}"' -# Enable bnx2x, qede, pcap and vhost-numa, the added deps are ok for us setconf CONFIG_RTE_LIBRTE_BNX2X_PMD y -setconf CONFIG_RTE_LIBRTE_QEDE_PMD y setconf CONFIG_RTE_LIBRTE_PMD_PCAP y setconf CONFIG_RTE_LIBRTE_VHOST_NUMA y -%if %{with shared} -setconf CONFIG_RTE_BUILD_SHARED_LIB y -%endif - -# Disable kernel modules setconf CONFIG_RTE_EAL_IGB_UIO n setconf CONFIG_RTE_LIBRTE_KNI n setconf CONFIG_RTE_KNI_KMOD n +setconf CONFIG_RTE_KNI_PREEMPT_DEFAULT n -# Disable experimental and ABI-breaking code -setconf CONFIG_RTE_NEXT_ABI n -setconf CONFIG_RTE_LIBRTE_POWER n +setconf CONFIG_RTE_APP_EVENTDEV n -make V=1 O=%{target} %{?_smp_mflags} +setconf CONFIG_RTE_LIBRTE_NFP_PMD y -# Creating PDF's has excessive build-requirements, html docs suffice fine -make V=1 O=%{target} %{?_smp_mflags} doc-api-html doc-guides-html +%ifarch aarch64 +setconf CONFIG_RTE_LIBRTE_DPAA_BUS n +setconf CONFIG_RTE_LIBRTE_DPAA_MEMPOOL n +setconf CONFIG_RTE_LIBRTE_DPAA_PMD n +%endif + +%if %{with shared} +setconf CONFIG_RTE_BUILD_SHARED_LIB y +%endif + +make V=1 O=%{target} %{?_smp_mflags} -Wimplicit-fallthrough=0 +make V=1 O=%{target} %{?_smp_mflags} doc-api-html doc-guides-html %{?with_pdfdoc: guides-pdf} %if %{with examples} make V=1 O=%{target}/examples T=%{target} %{?_smp_mflags} examples @@ -158,31 +211,34 @@ unset RTE_SDK RTE_INCLUDE RTE_TARGET %make_install O=%{target} prefix=%{_usr} libdir=%{_libdir} -# Create a driver directory with symlinks to all pmds -mkdir -p %{buildroot}/%{pmddir} -%if %{with shared} -for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do - bn=$(basename ${f}) - ln -s ../${bn} %{buildroot}%{pmddir}/${bn} -done -%endif - %if ! %{with tools} rm -rf %{buildroot}%{sdkdir}/usertools -rm -rf %{buildroot}%{_sbindir}/dpdk-devbind +rm -rf %{buildroot}%{_sbindir}/dpdk_nic_bind +rm -rf %{buildroot}%{_bindir}/dpdk-test-crypto-perf %endif -rm -f %{buildroot}%{sdkdir}/usertools/setup.sh +rm -f %{buildroot}%{sdkdir}/usertools/dpdk-setup.sh %if %{with examples} find %{target}/examples/ -name "*.map" | xargs rm -f for f in %{target}/examples/*/%{target}/app/*; do bn=`basename ${f}` - cp -p ${f} %{buildroot}%{_bindir}/${bn} + cp -p ${f} %{buildroot}%{_bindir}/dpdk_example_${bn} done -%else -rm -rf %{buildroot}%{sdkdir}/examples %endif +%if 0%{?fedora} >= 25 +# Replace /usr/bin/env python with /usr/bin/python3 +find %{buildroot}%{sdkdir}/ -name "*.py" -exec \ + sed -i -e 's|#!\s*/usr/bin/env python|#!/usr/bin/python3|' {} + +%endif + +# Create a driver directory with symlinks to all pmds +mkdir -p %{buildroot}/%{pmddir} +for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do + bn=$(basename ${f}) + ln -s ../${bn} %{buildroot}%{pmddir}/${bn} +done + # Setup RTE_SDK environment as expected by apps etc mkdir -p %{buildroot}/%{_sysconfdir}/profile.d cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh @@ -206,13 +262,11 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi %files # BSD -%doc README MAINTAINERS %{_bindir}/testpmd %{_bindir}/dpdk-procinfo -%dir %{pmddir} %if %{with shared} %{_libdir}/*.so.* -%{pmddir}/*.so.* +%{pmddir}/ %endif %files doc @@ -222,7 +276,7 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi %files devel #BSD %{incdir}/ -%{sdkdir}/ +%{sdkdir} %if %{with tools} %exclude %{sdkdir}/usertools/ %endif @@ -230,487 +284,151 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi %exclude %{sdkdir}/examples/ %endif %{_sysconfdir}/profile.d/dpdk-sdk-*.* -%if %{with shared} -%{_libdir}/*.so -%else +%if ! %{with shared} %{_libdir}/*.a -%endif - -%if %{with examples} -%files examples -%exclude %{_bindir}/dpdk-procinfo -%{_bindir}/* -%doc %{sdkdir}/examples/ +%else +%{_libdir}/*.so %endif %if %{with tools} %files tools %{sdkdir}/usertools/ %{_sbindir}/dpdk-devbind +%{_bindir}/dpdk-pdump +%{_bindir}/dpdk-pmdinfo +%{_bindir}/dpdk-test-crypto-perf %endif -%changelog -* Wed Jul 26 2017 Thomas F Herbert 17.08 -- Build 17.05, 17.08-rc1 and 17.08-rc2 - -* Mon Feb 27 2017 Thomas F Herbert 17.02.0-1 -- New usertools dir. Remove override of default gcc flags. - -* Fri Jan 13 2017 Thomas F Herbert 16.11.0-6 -- Applies virtio driver patch to 16.11 - -* Fri Dec 30 2016 Thomas F Herbert 16.11.0-5 -- Builds 16.07 and 16.11 +%if %{with examples} +%files examples +%{_bindir}/dpdk_example_* +%doc %{sdkdir}/examples +%endif -* Tue May 24 2016 Panu Matilainen - 16.07-0.4560.git587d684d.4 -- Create DT_NEEDED entries for internal library dependencies -- Fix missing zlib dependency on qede driver +%changelog +* Mon Jun 4 2018 Thomas F Herbert - 17.11.2-2 +- Backport changes from Fedora 28 17.11.2-1.f28 +- Remove dependency on Python3 for Centos -* Tue May 24 2016 Panu Matilainen - 16.07-0.4560.git587d684d.3 -- Enable crypto library + null driver, it is no longer experimental in 16.04 +* Tue Apr 24 2018 Neil Horman - 2:17.11.2-1 +- Update to latest 17.11 LTS (fixes bz 1571352) -* Fri May 20 2016 Panu Matilainen - 16.07-0.4560.git587d684d.2 -- Workaround #1337864 +* Tue Apr 10 2018 Timothy Redaelli - 2:17.11.1-2 +- Fix Requires dpdk by adding epoch (bz 1564215) -* Fri May 20 2016 Panu Matilainen - 16.07-0.4560.git587d684d.1 -- New snapshot +* Mon Apr 09 2018 Neil Horman - 17.11.1-1 +- sync rawhide updates (including LTS shift) with f28 (bz 1564215) -* Tue May 17 2016 Panu Matilainen - 16.07-0.4518.git213af31e.1 -- New snapshot +* Thu Apr 05 2018 Neil Horman - 18.02-6 +- Remove some debug checks (bz 1548404) -* Wed May 11 2016 Panu Matilainen - 16.07-0.4499.gita5e20775.1 -- New snapshot +* Thu Apr 05 2018 Neil Horman - 18.02-5 +- Fix compiler flag error (bz 1548404) -* Tue May 10 2016 Panu Matilainen - 16.07-0.4481.gitdb340cf2.2 -- Fix build with gcc >= 6.0 +* Tue Mar 20 2018 Neil Horman - 18.02-4 +- Update ldflags (bz 1548404) +- bump release to keep it in line with rawhide -* Tue May 10 2016 Panu Matilainen - 16.07-0.4481.gitdb340cf2.1 -- New snapshot +* Fri Mar 02 2018 Neil Horman - 18.02-2 +- update to latest upstream (bz 1550708) -* Wed Apr 27 2016 Panu Matilainen - 16.07-0.4433.gitd9ba0b2c.1 -- New 16.07-based snapshot -- Drop the trailing zero from version for good -- Add missing DT_NEEDED on librte_vhost to vhost pmd +* Wed Feb 07 2018 Fedora Release Engineering - 17.11-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild -* Tue Apr 26 2016 Panu Matilainen - 16.04.0-2 -- Get rid of the fedora-specific patch, -Wformat in CFLAGS is a nicer solution -- Switch to %autosetup to reduce fiddling with eventual patches -- Buildrequire git for patch application -- Upstream patch to fix segfault on virtio tx +* Wed Jan 03 2018 Iryna Shcherbina - 17.11-3 +- Update Python 2 dependency declarations to new packaging standards + (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3) -* Wed Apr 13 2016 Panu Matilainen - 16.04.0-1 -- Oops, bring back trailing zero, needed for rpm version compare... +* Thu Nov 30 2017 Neil Horman - 17.11-2 +- Fix dangling symlinks (bz 1519322) +- Fix devtools->usertools conversion (bz 1519332) +- Fix python-pyelftools requirement (bz 1519336) -* Tue Apr 12 2016 Panu Matilainen - 16.04-1 -- Update to 16.04 final -- Drop extra zero from version +* Thu Nov 16 2017 Neil Horman - 17.11-1 +- Update to latest upstream -* Fri Apr 08 2016 Panu Matilainen - 16.04.0-0.4398.gitc0f81e90.1 -- New snapshot (16.04.0-rc4) +* Wed Aug 09 2017 Neil Horman - 17.08-1 +- Update to latest upstream -* Thu Apr 07 2016 Panu Matilainen - 16.04.0-0.4370.gitb7d65109.1 -- New snapshot -- Re-enable vhost numa support (fixed in rc1 already) +* Mon Jul 31 2017 Neil Horman - 17.05-2 +- backport rte_eth_tx_done_cleanup map fix (#1476341) -* Mon Apr 04 2016 Panu Matilainen - 16.04.0-0.4339.gitf887a6f8.1 -- New snapshot (16.04.0-rc3) +* Wed Jul 26 2017 Fedora Release Engineering - 17.05-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild -* Fri Apr 01 2016 Panu Matilainen - 16.04.0-0.4316.git4410efd3.1 -- New snapshot +* Mon May 15 2017 Neil Horman - 17.05-1 +- Update to latest upstream -* Thu Mar 31 2016 Panu Matilainen - 16.04.0-0.4281.git5bcd7b5d.1 -- New snapshot +* Fri Feb 24 2017 Neil Horman - 17-02-2 +- Add python dependency (#1426561) -* Tue Mar 29 2016 Panu Matilainen - 16.04.0-0.4273.git6ac91f93.1 -- New snapshot (16.04.0-rc2) +* Wed Feb 15 2017 Fedora Release Monitoring - 17.02-1 +- Update to 17.02 (#1422285) -* Wed Mar 23 2016 Panu Matilainen - 16.04.0-0.4194.git281948b4.1 -- New snapshot +* Mon Feb 06 2017 Yaakov Selkowitz - 16.11-2 +- Enable aarch64, ppc64le (#1419731) -* Thu Mar 17 2016 Panu Matilainen - 16.04.0-0.3984.git6b5a857f.1 -- New snapshot (16.04.0-rc1) +* Tue Nov 15 2016 Neil Horman - 16.11-1 +- Update to 16.11 -* Wed Mar 16 2016 Panu Matilainen - 16.04.0-0.3984.git6b5a857f.2 -- Switch to ifarch-based solution for target/machine etc afterall +* Tue Aug 02 2016 Neil Horman - 16.07-1 +* Update to 16.07 -* Mon Mar 14 2016 Panu Matilainen - 16.04.0-0.3984.git6b5a857f.1 -- New snapshot -- Drop upstreamed dtneeded patch +* Thu Apr 14 2016 Panu Matilainen - 16.04-1 +- Update to 16.04 +- Drop all patches, they're not needed anymore +- Drop linker script generation, its upstream now +- Enable vhost numa support again -* Fri Mar 11 2016 Panu Matilainen - 16.04.0-0.3934.git94b0ad8e.2 +* Wed Mar 16 2016 Panu Matilainen - 2.2.0-7 - vhost numa code causes crashes, disable until upstream fixes +- Generalize target/machine/etc macros to enable i686 builds -* Fri Mar 11 2016 Panu Matilainen - 16.04.0-0.3934.git94b0ad8e.1 -- New snapshot -- Generalize target/machine/etc macros to enable i686 builds too - -* Thu Mar 10 2016 Panu Matilainen - 16.04.0-0.3914.git4c387fcd.2 -- Drop no longer needed -fno-strict-aliasing - -* Thu Mar 10 2016 Panu Matilainen - 16.04.0-0.3914.git4c387fcd.1 -- New snapshot - -* Mon Mar 07 2016 Panu Matilainen - 16.04.0-0.3875.git8f6f2434.1 -- New snapshot - -* Thu Mar 03 2016 Panu Matilainen - 16.04.0-0.3860.gitf4730aa6.1 -- New snapshot -- Drop ip_pipeline buildopts patch, should be fixed upstream for some time now -- Drop no longer needed -Wno-error - -* Wed Mar 02 2016 Panu Matilainen - 16.04.0-0.3853.git948fd64b.1 -- New snapshot -- Adapt to upstream accepting the linker script approach, yay - -* Tue Mar 01 2016 Panu Matilainen - 16.04.0-0.3850.git9ec201f5.1 -- New snapshot - -* Mon Feb 29 2016 Panu Matilainen - 16.04.0-0.3843.gita3af38a1.1 -- New snapshot - -* Thu Feb 18 2016 Panu Matilainen - 16.04.0-0.3809.git9fd72e3c.1 -- New snapshot -- Temporarily disable strict aliasing to appease gcc 6 -- Enable parallel build again - -* Mon Feb 15 2016 Panu Matilainen - 16.04.0-0.3790.git5fa83b53.2 +* Tue Mar 01 2016 Panu Matilainen - 2.2.0-6 +- Drop no longer needed bnx2x patch, the gcc false positive has been fixed +- Drop no longer needed -Wno-error=array-bounds from CFLAGS +- Eliminate the need for the enic patch by eliminating second -Wall from CFLAGS - Disable unmaintained librte_power as per upstream recommendation -* Fri Feb 12 2016 Panu Matilainen - 16.04.0-0.3790.git5fa83b53.1 -- New snapshot - -* Thu Feb 11 2016 Panu Matilainen - 16.04.0-0.3783.git50810f09.2 -- Temporarily disable -Werror due to many new warnings from gcc 6 - -* Thu Feb 11 2016 Panu Matilainen - 16.04.0-0.3783.git50810f09.1 -- New snapshot, with new upstream versioning scheme +* Mon Feb 15 2016 Neil Horman 2.2.0-5 +- Fix ftbfs isssue (1307431) -* Fri Jan 29 2016 Panu Matilainen - 2.3.0-0.3759.gitdd34ff1f.1 -- New snapshot +* Wed Feb 03 2016 Fedora Release Engineering - 2.2.0-4 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild -* Thu Jan 28 2016 Panu Matilainen - 2.3.0-0.3757.git2593612d.1 -- New snapshot - -* Wed Jan 27 2016 Panu Matilainen - 2.3.0-0.3746.gitc7985de0.1 -- New snapshot +* Tue Jan 26 2016 Panu Matilainen - 2.2.0-3 - Use a different quoting method to avoid messing up vim syntax highlighting - A string is expected as CONFIG_RTE_MACHINE value, quote it too -* Tue Jan 19 2016 Panu Matilainen - 2.3.0-0.3742.gitff82e08a.2 +* Mon Jan 25 2016 Panu Matilainen - 2.2.0-2 - Enable librte_vhost NUMA-awareness -* Mon Jan 18 2016 Panu Matilainen - 2.3.0-0.3742.gitff82e08a.1 -- New snapshot - -* Wed Jan 13 2016 Panu Matilainen - 2.3.0-0.3725.git3b60ce8c.3 -- Fix extra junk being generated in profile.d -- Never include setup.sh - -* Thu Jan 07 2016 Panu Matilainen - 2.3.0-0.3725.git3b60ce8c.2 -- Make option matching stricter in spec setconf - -* Fri Dec 18 2015 Panu Matilainen - 2.3.0-0.3725.git3b60ce8c.1 -- New 2.3-pre snapshot - -* Wed Dec 16 2015 Panu Matilainen - 2.2.0-1 -- Update to DPDK 2.2.0 final - -* Tue Dec 15 2015 Panu Matilainen - 2.2.0-0.3711.git728c9e54-1 -- New snapshot - -* Mon Dec 14 2015 Panu Matilainen - 2.2.0-0.3688.gitbc31261c-2 -- Fixup target machine mismatch in profile.d environment -- Fixup installed dpdk-devel affecting "make install" result -- Add README and MAINTAINERS docs - -* Mon Dec 14 2015 Panu Matilainen - 2.2.0-0.3688.gitbc31261c-1 -- New snapshot (2.2.0-rc4) - -* Fri Dec 11 2015 Panu Matilainen - 2.2.0-0.3637.gitb700090c-4 -- Fix relpath.sh bug causing broken symlinks - -* Fri Dec 11 2015 Panu Matilainen - 2.2.0-0.3637.gitb700090c-3 -- Adopt new upstream standard installation layout - -* Fri Dec 11 2015 Panu Matilainen - 2.2.0-0.3637.gitb700090c-2 -- Define + use a local macro for include dir location -- Group our directory macros together -- Fix static (ie --without shared) build - -* Fri Dec 11 2015 Panu Matilainen - 2.2.0-0.3637.gitb700090c-1 -- New snapshot - -* Thu Dec 10 2015 Panu Matilainen - 2.2.0-0.3624.git1befe9ca-1 -- New snapshot -- More complete dtneeded patch which should fixes build on rawhide - -* Tue Dec 08 2015 Panu Matilainen - 2.2.0-0.3614.git2616f497-1 -- New snapshot (2.2.0-rc3) - -* Mon Dec 07 2015 Panu Matilainen - 2.2.0-0.3593.git3f3d6010-1 -- New snapshot with fixed ip_pipeline - -* Mon Dec 07 2015 Panu Matilainen - 2.2.0-0.3592.git13318bbb-1 -- New snapshot -- ip_pipeline example is broken, disable temporarily -- upstream introduced new complications wrt our warning flags, adjust patches... - -* Mon Nov 30 2015 Panu Matilainen - 2.2.0-0.3504.git538020aa -- New snapshot - -* Thu Nov 26 2015 Panu Matilainen - 2.2.0-0.3496.git84fb2e67.1 -- New snapshot (2.2.0-rc2) -- Disable experimental cryptodev library - -* Wed Nov 25 2015 Panu Matilainen - 2.2.0-0.3463.git61383240.1 -- New snapshot -- Disable CONFIG_RTE_SCHED_VECTOR, it conflicts with CONFIG_RTE_MACHINE default - -* Tue Nov 24 2015 Panu Matilainen - 2.2.0-0.3424.git4522eca1.1 -- New snapshot - -* Fri Nov 20 2015 Panu Matilainen - 2.2.0-0.3399.gite64833f2.1 -- New snapshot - -* Thu Nov 19 2015 Panu Matilainen - 2.2.0-0.3394.git4c02e453.1 -- New snapshot - -* Wed Nov 18 2015 Panu Matilainen - 2.2.0-0.3371.git2d123257.3 -- Make driver links to the actual pmd dso's, not their -devel symlinks - -* Wed Nov 18 2015 Panu Matilainen - 2.2.0-0.3371.git2d123257.2 -- Make plugin loading filesystem agnostic, sigh -- Fix missing symbol export - -* Mon Nov 16 2015 Panu Matilainen - 2.2.0-0.3371.git2d123257.1 -- New snapshot - -* Fri Nov 13 2015 Panu Matilainen - 2.2.0-0.3329.git695ae278.1 -- New snapshot -- Move the unversioned pmd symlinks from libdir -devel +* Wed Jan 20 2016 Panu Matilainen - 2.2.0-1 +- Update to 2.2.0 - Establish a driver directory for automatic driver loading +- Move the unversioned pmd symlinks from libdir -devel +- Make option matching stricter in spec setconf +- Spec cleanups +- Adopt upstream standard installation layout -* Wed Nov 04 2015 Panu Matilainen - 2.2.0-0.3321.gitc4d404d7.1 -- New snapshot (2.2.0-rc1) - -* Wed Nov 04 2015 Panu Matilainen - 2.2.0-0.3306.git4b90a3ff.1 -- New snapshot -- Drop librte_kni afterall, makes no sense without the kernel module -- Drop main package dependency from -tools, its not strictly needed - -* Mon Nov 02 2015 Panu Matilainen - 2.2.0-0.3216.gitab3257e1.1 -- New snapshot - -* Fri Oct 30 2015 Panu Matilainen - 2.2.0-0.3141.git92e689ce.1 -- New snapshot -- Fix vhost-user segfault with multiqueue - -* Wed Oct 28 2015 Panu Matilainen - 2.2.0-0.3111.git4c8db5f0.1 -- New snapshot - -* Tue Oct 27 2015 Panu Matilainen - 2.2.0-0.3076.git19d4d7ef.1 -- New snapshot - -* Mon Oct 26 2015 Panu Matilainen - 2.2.0-0.3064.gitfaefe229.1 -- New snapshot - -* Wed Oct 21 2015 Panu Matilainen - 2.2.0-0.3049.gitce8e1218.1 -- New snapshot -- Enable bnx2x pmd, which buildrequires zlib-devel - -* Tue Sep 29 2015 Panu Matilainen - 2.2.0-0.2955.git9702b2b5.3 -- Oops, rename our linker script to match current upstream - -* Mon Sep 28 2015 Panu Matilainen - 2.2.0-0.2955.git9702b2b5 -- New snapshot -- Make lib and include available both ways in the SDK paths - -* Mon Sep 21 2015 Panu Matilainen - 2.2.0-0.2947.gitc36a82f0 -- New snapshot - -* Tue Aug 18 2015 Panu Matilainen - 2.1.0-1 -- Update to dpdk 2.1.0 final - -* Wed Aug 12 2015 Panu Matilainen - 2.1.0-0.2898.gitf1e779ec -- New snapshot -- Disable ABI_NEXT -- Rebase patches as necessary -- Fix build of ip_pipeline example -- Drop no longer needed -Wno-error=array-bounds -- Enable librte_kni build but disable the kernel module - -* Tue Jun 23 2015 Panu Matilainen - 2.1.0-0.2429.gitc6a0fb5f -- New snapshot - -* Mon Jun 22 2015 Panu Matilainen - 2.1.0-0.2395.git1c2bbcdf -- New snapshot - -* Wed Jun 17 2015 Panu Matilainen - 2.1.0-0.2367.git790aa264 -- New snapshot - -* Mon Jun 15 2015 Panu Matilainen - 2.1.0-0.2320.gitc76ee0d0 -- Update to pre-2.1.0 snapshot - -* Wed Jun 03 2015 Panu Matilainen - 2.0.0-9 -- Really enable example apps on the copr repos - -* Wed Jun 03 2015 Panu Matilainen - 2.0.0-8 -- Re-enable example apps on the copr repos - -* Tue May 19 2015 Panu Matilainen - 2.0.0-7 -- Drop pointless build conditional, the linker script is here to stay -- Drop vhost-cuse build conditional, vhost-user is here to stay -- Cleanup comments a bit -- Enable parallel build again -- Dont build examples by default - -* Thu Apr 30 2015 Panu Matilainen - 2.0.0-6 -- Fix potential hang and thread issues with VFIO eventfd - -* Fri Apr 24 2015 Panu Matilainen - 2.0.0-5 -- Fix a potential hang due to missed interrupt in vhost library - -* Tue Apr 21 2015 Panu Matilainen - 2.0.0-4 -- Drop unused pre-2.0 era patches -- Handle vhost-user/cuse selection automatically based on the copr repo name - -* Fri Apr 17 2015 Panu Matilainen - 2.0.0-3 -- Dont depend on fuse when built for vhost-user support -- Drop version from testpmd binary, we wont be parallel-installing that - -* Thu Apr 09 2015 Panu Matilainen - 2.0.0-2 -- Remove the broken kmod stuff -- Add a new dkms-based eventfd_link subpackage if vhost-cuse is enabled - -* Tue Apr 07 2015 Panu Matilainen - 2.0.0-1 -- Update to 2.0 final (http://dpdk.org/doc/guides-2.0/rel_notes/index.html) - -* Thu Apr 02 2015 Panu Matilainen - 2.0.0-0.2086.git263333bb.2 -- Switch (back) to vhost-user, thus disabling vhost-cuse support -- Build requires fuse-devel for now even when fuse is unused - -* Mon Mar 30 2015 Panu Matilainen - 2.0.0-0.2049.git2f95a470.1 -- New snapshot -- Add spec option for enabling vhost-user instead of vhost-cuse -- Build requires fuse-devel only with vhost-cuse -- Add virtual provide for vhost user/cuse tracking - -* Fri Mar 27 2015 Panu Matilainen - 2.0.0-0.2038.git91a8743e.3 -- Disable vhost-user for now to get vhost-cuse support, argh. - -* Fri Mar 27 2015 Panu Matilainen - 2.0.0-0.2038.git91a8743e.2 -- Add a bunch of missing dependencies to -tools - -* Thu Mar 26 2015 Panu Matilainen - 2.0.0-0.2038.git91a8743e.1 -- Another day, another snapshot -- Disable IVSHMEM support for now - -* Fri Mar 20 2015 Panu Matilainen - 2.0.0-0.2022.gitfe4810a0.2 -- Dont fail build for array bounds warnings for now, gcc 5 is emitting a bunch - -* Fri Mar 20 2015 Panu Matilainen - 2.0.0-0.2022.gitfe4810a0.1 -- Another day, another snapshot -- Avoid building pdf docs - -* Tue Mar 03 2015 Panu Matilainen - 2.0.0-0.1916.gita001589e.2 -- Add missing dependency to tools -subpackage - -* Tue Mar 03 2015 Panu Matilainen - 2.0.0-0.1916.gita001589e.1 -- New snapshot -- Work around #1198009 - -* Mon Mar 02 2015 Panu Matilainen - 2.0.0-0.1911.gitffc468ff.2 -- Optionally package tools too, some binding script is needed for many setups - -* Mon Mar 02 2015 Panu Matilainen - 2.0.0-0.1911.gitffc468ff.1 -- New snapshot -- Disable kernel module build by default -- Add patch to fix missing defines/includes for external applications - -* Fri Feb 27 2015 Panu Matilainen - 2.0.0-0.1906.git00c68563.1 -- New snapshot -- Remove bogus devname module alias from eventfd-link module -- Whack evenfd-link to honor RTE_KERNELDIR too - -* Thu Feb 26 2015 Panu Matilainen - 2.0.0-0.1903.gitb67578cc.3 -- Add spec option to build kernel modules too -- Build eventfd-link module too if kernel modules enabled - -* Thu Feb 26 2015 Panu Matilainen - 2.0.0-0.1903.gitb67578cc.2 -- Move config changes from spec after "make config" to simplify things -- Move config changes from dpdk-config patch to the spec - -* Thu Feb 19 2015 Panu Matilainen - 2.0.0-0.1717.gitd3aa5274.2 -- Fix warnings tripping up build with gcc 5, remove -Wno-error - -* Wed Feb 18 2015 Panu Matilainen - 2.0.0-0.1698.gitc07691ae.1 -- Move the unversioned .so links for plugins into main package -- New snapshot - -* Wed Feb 18 2015 Panu Matilainen - 2.0.0-0.1695.gitc2ce3924.3 -- Fix missing symbol export for rte_eal_iopl_init() -- Only mention libs once in the linker script - -* Wed Feb 18 2015 Panu Matilainen - 2.0.0-0.1695.gitc2ce3924.2 -- Fix gcc version logic to work with 5.0 too - -* Wed Feb 18 2015 Panu Matilainen - 2.0.0-0.1695.gitc2ce3924.1 -- Add spec magic to easily switch between stable and snapshot versions -- Add tarball snapshot script for reference -- Update to pre-2.0 git snapshot - -* Thu Feb 12 2015 Panu Matilainen - 1.8.0-15 -- Disable -Werror, this is not useful behavior for released versions - -* Wed Feb 11 2015 Panu Matilainen - 1.8.0-14 -- Fix typo causing librte_vhost missing DT_NEEDED on fuse - -* Wed Feb 11 2015 Panu Matilainen - 1.8.0-13 -- Fix vhost library linkage -- Add spec option to build example applications, enable by default - -* Fri Feb 06 2015 Panu Matilainen - 1.8.0-12 -- Enable librte_acl build -- Enable librte_ivshmem build - -* Thu Feb 05 2015 Panu Matilainen - 1.8.0-11 -- Drop the private libdir, not needed with versioned libs - -* Thu Feb 05 2015 Panu Matilainen - 1.8.0-10 -- Drop symbol versioning patches, always do library version for shared -- Add comment on the combined library thing - -* Wed Feb 04 2015 Panu Matilainen - 1.8.0-9 -- Add missing symbol version to librte_cmdline - -* Tue Feb 03 2015 Panu Matilainen - 1.8.0-8 -- Set soname of the shared libraries -- Fixup typo in ld path config file name - -* Tue Feb 03 2015 Panu Matilainen - 1.8.0-7 -- Add library versioning patches as another build option, enable by default - -* Tue Feb 03 2015 Panu Matilainen - 1.8.0-6 -- Add our libraries to ld path & run ldconfig when using shared libs - -* Fri Jan 30 2015 Panu Matilainen - 1.8.0-5 -- Add DT_NEEDED for external dependencies (pcap, fuse, dl, pthread) -- Enable combined library creation, needed for OVS -- Enable shared library creation, needed for sanity +* Thu Oct 22 2015 Aaron Conole - 2.1.0-3 +- Include examples binaries +- Enable the Broadcom NetXtreme II 10Gb PMD +- Fix up linkages for the dpdk-devel package -* Thu Jan 29 2015 Panu Matilainen - 1.8.0-4 -- Include scripts directory in the "sdk" too +* Wed Sep 30 2015 Aaron Conole - 2.1.0-2 +- Re-enable the IGB, IXGBE, I40E PMDs +- Bring the Fedora and RHEL packages more in-line. -* Thu Jan 29 2015 Panu Matilainen - 1.8.0-3 -- Fix -Wformat clash preventing i40e driver build, enable it -- Fix -Wall clash preventing enic driver build, enable it +* Wed Aug 26 2015 Neil Horman - 2.1.0-1 +- Update to latest version -* Thu Jan 29 2015 Panu Matilainen - 1.8.0-2 -- Enable librte_vhost, which buildrequires fuse-devel -- Enable physical NIC drivers that build (e1000, ixgbe) for VFIO use +* Wed Jun 17 2015 Fedora Release Engineering - 2.0.0-2 +- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild -* Thu Jan 29 2015 Panu Matilainen - 1.8.0-1 -- Update to 1.8.0 +* Mon Apr 06 2015 Neil Horman - 2.0.0-1 +- Update to dpdk 2.0 +- converted --with shared option to --without shared option * Wed Jan 28 2015 Panu Matilainen - 1.7.0-8 - Always build with -fPIC @@ -750,7 +468,7 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi - Remove ix86 from ExclusiveArch -- it does not build with above changes * Thu Jul 10 2014 - Neil Horman - 1.7.0-1.0 -- Update source to official 1.7.0 release +- Update source to official 1.7.0 release * Thu Jul 03 2014 - Neil Horman - Fixing up release numbering @@ -769,3 +487,4 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi * Tue May 13 2014 - Neil Horman - 1.7.0-0.6.20140603git5ebbb1728 - Initial Build + -- cgit 1.2.3-korg