From 639509ad42f8bd6baf9b6f5b668a9bbfb05108d4 Mon Sep 17 00:00:00 2001 From: Andrej Kozemcak Date: Thu, 20 Dec 2018 17:49:33 +0100 Subject: Add Openconfig YANG modules. Change-Id: I7e98bf1ca7196cff042a35b8bf096d2ea9d80028 Signed-off-by: Andrej Kozemcak --- src/plugins/yang/openconfig/ietf-interfaces.yang | 1123 ++++++ .../yang/openconfig/openconfig-aaa-radius.yang | 180 + .../yang/openconfig/openconfig-aaa-tacacs.yang | 136 + .../yang/openconfig/openconfig-aaa-types.yang | 162 + src/plugins/yang/openconfig/openconfig-aaa.yang | 811 +++++ .../yang/openconfig/openconfig-access-points.yang | 168 + src/plugins/yang/openconfig/openconfig-acl.yang | 837 +++++ .../yang/openconfig/openconfig-aft-common.yang | 385 +++ .../yang/openconfig/openconfig-aft-ethernet.yang | 93 + .../yang/openconfig/openconfig-aft-ipv4.yang | 94 + .../yang/openconfig/openconfig-aft-ipv6.yang | 94 + .../yang/openconfig/openconfig-aft-mpls.yang | 111 + .../openconfig-aft-network-instance.yang | 98 + src/plugins/yang/openconfig/openconfig-aft-pf.yang | 172 + .../yang/openconfig/openconfig-aft-types.yang | 58 + src/plugins/yang/openconfig/openconfig-aft.yang | 144 + .../yang/openconfig/openconfig-alarm-types.yang | 139 + src/plugins/yang/openconfig/openconfig-alarms.yang | 221 ++ .../yang/openconfig/openconfig-ap-manager.yang | 220 ++ src/plugins/yang/openconfig/openconfig-bfd.yang | 738 ++++ .../openconfig-bgp-common-multiprotocol.yang | 518 +++ .../openconfig-bgp-common-structure.yang | 196 ++ .../yang/openconfig/openconfig-bgp-common.yang | 665 ++++ .../yang/openconfig/openconfig-bgp-errors.yang | 421 +++ .../yang/openconfig/openconfig-bgp-global.yang | 389 +++ .../yang/openconfig/openconfig-bgp-neighbor.yang | 704 ++++ .../yang/openconfig/openconfig-bgp-peer-group.yang | 271 ++ .../yang/openconfig/openconfig-bgp-policy.yang | 1210 +++++++ .../yang/openconfig/openconfig-bgp-types.yang | 604 ++++ src/plugins/yang/openconfig/openconfig-bgp.yang | 155 + .../yang/openconfig/openconfig-catalog-types.yang | 242 ++ .../openconfig/openconfig-channel-monitor.yang | 330 ++ .../yang/openconfig/openconfig-extensions.yang | 91 + .../yang/openconfig/openconfig-if-aggregate.yang | 223 ++ .../openconfig/openconfig-if-ethernet-ext.yang | 106 + .../yang/openconfig/openconfig-if-ethernet.yang | 428 +++ .../yang/openconfig/openconfig-if-ip-ext.yang | 169 + src/plugins/yang/openconfig/openconfig-if-ip.yang | 1312 +++++++ src/plugins/yang/openconfig/openconfig-if-poe.yang | 99 + .../yang/openconfig/openconfig-if-tunnel.yang | 109 + .../yang/openconfig/openconfig-if-types.yang | 98 + .../yang/openconfig/openconfig-igmp-types.yang | 53 + src/plugins/yang/openconfig/openconfig-igmp.yang | 356 ++ .../yang/openconfig/openconfig-inet-types.yang | 332 ++ .../yang/openconfig/openconfig-interfaces.yang | 1040 ++++++ .../openconfig/openconfig-isis-lsdb-types.yang | 686 ++++ .../yang/openconfig/openconfig-isis-lsp.yang | 3592 ++++++++++++++++++++ .../yang/openconfig/openconfig-isis-policy.yang | 189 + .../yang/openconfig/openconfig-isis-routing.yang | 384 +++ .../yang/openconfig/openconfig-isis-types.yang | 339 ++ src/plugins/yang/openconfig/openconfig-isis.yang | 2059 +++++++++++ src/plugins/yang/openconfig/openconfig-lacp.yang | 461 +++ .../yang/openconfig/openconfig-lldp-types.yang | 296 ++ src/plugins/yang/openconfig/openconfig-lldp.yang | 650 ++++ .../yang/openconfig/openconfig-local-routing.yang | 408 +++ .../yang/openconfig/openconfig-module-catalog.yang | 786 +++++ .../yang/openconfig/openconfig-mpls-igp.yang | 129 + .../yang/openconfig/openconfig-mpls-ldp.yang | 873 +++++ .../yang/openconfig/openconfig-mpls-rsvp.yang | 1446 ++++++++ .../yang/openconfig/openconfig-mpls-sr.yang | 138 + .../yang/openconfig/openconfig-mpls-static.yang | 312 ++ .../yang/openconfig/openconfig-mpls-te.yang | 1381 ++++++++ .../yang/openconfig/openconfig-mpls-types.yang | 426 +++ src/plugins/yang/openconfig/openconfig-mpls.yang | 746 ++++ .../openconfig/openconfig-network-instance-l2.yang | 339 ++ .../openconfig/openconfig-network-instance-l3.yang | 234 ++ .../openconfig-network-instance-policy.yang | 115 + .../openconfig-network-instance-types.yang | 261 ++ .../openconfig/openconfig-network-instance.yang | 1093 ++++++ .../yang/openconfig/openconfig-openflow-types.yang | 93 + .../yang/openconfig/openconfig-openflow.yang | 314 ++ .../openconfig/openconfig-optical-amplifier.yang | 474 +++ .../yang/openconfig/openconfig-ospf-policy.yang | 188 + .../yang/openconfig/openconfig-ospf-types.yang | 784 +++++ .../openconfig-ospfv2-area-interface.yang | 472 +++ .../yang/openconfig/openconfig-ospfv2-area.yang | 169 + .../yang/openconfig/openconfig-ospfv2-common.yang | 91 + .../yang/openconfig/openconfig-ospfv2-global.yang | 509 +++ .../yang/openconfig/openconfig-ospfv2-lsdb.yang | 2355 +++++++++++++ src/plugins/yang/openconfig/openconfig-ospfv2.yang | 98 + .../openconfig/openconfig-packet-match-types.yang | 297 ++ .../yang/openconfig/openconfig-packet-match.yang | 360 ++ .../openconfig-pf-forwarding-policies.yang | 385 +++ .../yang/openconfig/openconfig-pf-interfaces.yang | 121 + .../yang/openconfig/openconfig-pf-path-groups.yang | 125 + .../yang/openconfig/openconfig-pf-srte.yang | 280 ++ .../yang/openconfig/openconfig-pim-types.yang | 74 + src/plugins/yang/openconfig/openconfig-pim.yang | 464 +++ .../yang/openconfig/openconfig-platform-cpu.yang | 61 + .../yang/openconfig/openconfig-platform-ext.yang | 72 + .../yang/openconfig/openconfig-platform-fan.yang | 65 + .../openconfig/openconfig-platform-linecard.yang | 118 + .../yang/openconfig/openconfig-platform-port.yang | 149 + .../yang/openconfig/openconfig-platform-psu.yang | 135 + .../openconfig-platform-transceiver.yang | 492 +++ .../yang/openconfig/openconfig-platform-types.yang | 271 ++ .../yang/openconfig/openconfig-platform.yang | 762 +++++ .../openconfig/openconfig-policy-forwarding.yang | 119 + .../yang/openconfig/openconfig-policy-types.yang | 220 ++ .../yang/openconfig/openconfig-probes-types.yang | 75 + src/plugins/yang/openconfig/openconfig-probes.yang | 569 ++++ .../yang/openconfig/openconfig-procmon.yang | 165 + .../yang/openconfig/openconfig-qos-elements.yang | 1304 +++++++ .../yang/openconfig/openconfig-qos-interfaces.yang | 660 ++++ .../yang/openconfig/openconfig-qos-types.yang | 148 + src/plugins/yang/openconfig/openconfig-qos.yang | 90 + .../yang/openconfig/openconfig-relay-agent.yang | 815 +++++ .../openconfig/openconfig-rib-bgp-attributes.yang | 907 +++++ .../yang/openconfig/openconfig-rib-bgp-ext.yang | 166 + .../openconfig-rib-bgp-shared-attributes.yang | 171 + .../openconfig-rib-bgp-table-attributes.yang | 113 + .../yang/openconfig/openconfig-rib-bgp-tables.yang | 883 +++++ .../yang/openconfig/openconfig-rib-bgp-types.yang | 244 ++ .../yang/openconfig/openconfig-rib-bgp.yang | 209 ++ .../yang/openconfig/openconfig-routing-policy.yang | 1097 ++++++ .../yang/openconfig/openconfig-rsvp-sr-ext.yang | 400 +++ .../openconfig/openconfig-segment-routing.yang | 780 +++++ .../openconfig/openconfig-spanning-tree-types.yang | 225 ++ .../yang/openconfig/openconfig-spanning-tree.yang | 823 +++++ .../yang/openconfig/openconfig-system-logging.yang | 492 +++ .../openconfig/openconfig-system-management.yang | 126 + .../openconfig/openconfig-system-terminal.yang | 239 ++ src/plugins/yang/openconfig/openconfig-system.yang | 978 ++++++ .../openconfig/openconfig-telemetry-types.yang | 115 + .../yang/openconfig/openconfig-telemetry.yang | 771 +++++ .../openconfig/openconfig-terminal-device.yang | 1370 ++++++++ .../openconfig-transport-line-common.yang | 317 ++ .../openconfig-transport-line-protection.yang | 612 ++++ .../openconfig/openconfig-transport-types.yang | 834 +++++ src/plugins/yang/openconfig/openconfig-types.yang | 455 +++ .../yang/openconfig/openconfig-vlan-types.yang | 195 ++ src/plugins/yang/openconfig/openconfig-vlan.yang | 438 +++ .../openconfig/openconfig-wavelength-router.yang | 360 ++ .../yang/openconfig/openconfig-wifi-mac.yang | 1482 ++++++++ .../yang/openconfig/openconfig-wifi-phy.yang | 393 +++ .../yang/openconfig/openconfig-wifi-types.yang | 295 ++ .../yang/openconfig/openconfig-yang-types.yang | 180 + 137 files changed, 63061 insertions(+) create mode 100644 src/plugins/yang/openconfig/ietf-interfaces.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aaa-radius.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aaa-tacacs.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aaa-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aaa.yang create mode 100644 src/plugins/yang/openconfig/openconfig-access-points.yang create mode 100644 src/plugins/yang/openconfig/openconfig-acl.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-common.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-ethernet.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-ipv4.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-ipv6.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-mpls.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-network-instance.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-pf.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-aft.yang create mode 100644 src/plugins/yang/openconfig/openconfig-alarm-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-alarms.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ap-manager.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bfd.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-common-multiprotocol.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-common-structure.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-common.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-errors.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-global.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-neighbor.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-peer-group.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-policy.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-bgp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-catalog-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-channel-monitor.yang create mode 100644 src/plugins/yang/openconfig/openconfig-extensions.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-aggregate.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-ethernet-ext.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-ethernet.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-ip-ext.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-ip.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-poe.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-tunnel.yang create mode 100644 src/plugins/yang/openconfig/openconfig-if-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-igmp-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-igmp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-inet-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-interfaces.yang create mode 100644 src/plugins/yang/openconfig/openconfig-isis-lsdb-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-isis-lsp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-isis-policy.yang create mode 100644 src/plugins/yang/openconfig/openconfig-isis-routing.yang create mode 100644 src/plugins/yang/openconfig/openconfig-isis-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-isis.yang create mode 100644 src/plugins/yang/openconfig/openconfig-lacp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-lldp-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-lldp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-local-routing.yang create mode 100644 src/plugins/yang/openconfig/openconfig-module-catalog.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-igp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-ldp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-rsvp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-sr.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-static.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-te.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-mpls.yang create mode 100644 src/plugins/yang/openconfig/openconfig-network-instance-l2.yang create mode 100644 src/plugins/yang/openconfig/openconfig-network-instance-l3.yang create mode 100644 src/plugins/yang/openconfig/openconfig-network-instance-policy.yang create mode 100644 src/plugins/yang/openconfig/openconfig-network-instance-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-network-instance.yang create mode 100644 src/plugins/yang/openconfig/openconfig-openflow-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-openflow.yang create mode 100644 src/plugins/yang/openconfig/openconfig-optical-amplifier.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospf-policy.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospf-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospfv2-area-interface.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospfv2-area.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospfv2-common.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospfv2-global.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospfv2-lsdb.yang create mode 100644 src/plugins/yang/openconfig/openconfig-ospfv2.yang create mode 100644 src/plugins/yang/openconfig/openconfig-packet-match-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-packet-match.yang create mode 100644 src/plugins/yang/openconfig/openconfig-pf-forwarding-policies.yang create mode 100644 src/plugins/yang/openconfig/openconfig-pf-interfaces.yang create mode 100644 src/plugins/yang/openconfig/openconfig-pf-path-groups.yang create mode 100644 src/plugins/yang/openconfig/openconfig-pf-srte.yang create mode 100644 src/plugins/yang/openconfig/openconfig-pim-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-pim.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-cpu.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-ext.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-fan.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-linecard.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-port.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-psu.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-transceiver.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-platform.yang create mode 100644 src/plugins/yang/openconfig/openconfig-policy-forwarding.yang create mode 100644 src/plugins/yang/openconfig/openconfig-policy-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-probes-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-probes.yang create mode 100644 src/plugins/yang/openconfig/openconfig-procmon.yang create mode 100644 src/plugins/yang/openconfig/openconfig-qos-elements.yang create mode 100644 src/plugins/yang/openconfig/openconfig-qos-interfaces.yang create mode 100644 src/plugins/yang/openconfig/openconfig-qos-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-qos.yang create mode 100644 src/plugins/yang/openconfig/openconfig-relay-agent.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp-attributes.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp-ext.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp-shared-attributes.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp-table-attributes.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp-tables.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rib-bgp.yang create mode 100644 src/plugins/yang/openconfig/openconfig-routing-policy.yang create mode 100644 src/plugins/yang/openconfig/openconfig-rsvp-sr-ext.yang create mode 100644 src/plugins/yang/openconfig/openconfig-segment-routing.yang create mode 100644 src/plugins/yang/openconfig/openconfig-spanning-tree-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-spanning-tree.yang create mode 100644 src/plugins/yang/openconfig/openconfig-system-logging.yang create mode 100644 src/plugins/yang/openconfig/openconfig-system-management.yang create mode 100644 src/plugins/yang/openconfig/openconfig-system-terminal.yang create mode 100644 src/plugins/yang/openconfig/openconfig-system.yang create mode 100644 src/plugins/yang/openconfig/openconfig-telemetry-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-telemetry.yang create mode 100644 src/plugins/yang/openconfig/openconfig-terminal-device.yang create mode 100644 src/plugins/yang/openconfig/openconfig-transport-line-common.yang create mode 100644 src/plugins/yang/openconfig/openconfig-transport-line-protection.yang create mode 100644 src/plugins/yang/openconfig/openconfig-transport-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-vlan-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-vlan.yang create mode 100644 src/plugins/yang/openconfig/openconfig-wavelength-router.yang create mode 100644 src/plugins/yang/openconfig/openconfig-wifi-mac.yang create mode 100644 src/plugins/yang/openconfig/openconfig-wifi-phy.yang create mode 100644 src/plugins/yang/openconfig/openconfig-wifi-types.yang create mode 100644 src/plugins/yang/openconfig/openconfig-yang-types.yang diff --git a/src/plugins/yang/openconfig/ietf-interfaces.yang b/src/plugins/yang/openconfig/ietf-interfaces.yang new file mode 100644 index 0000000..f66c205 --- /dev/null +++ b/src/plugins/yang/openconfig/ietf-interfaces.yang @@ -0,0 +1,1123 @@ +module ietf-interfaces { + yang-version 1.1; + namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces"; + prefix if; + + import ietf-yang-types { + prefix yang; + } + + organization + "IETF NETMOD (Network Modeling) Working Group"; + + contact + "WG Web: + WG List: + + Editor: Martin Bjorklund + "; + + description + "This module contains a collection of YANG definitions for + managing network interfaces. + + Copyright (c) 2018 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (https://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 8343; see + the RFC itself for full legal notices."; + + revision 2018-02-20 { + description + "Updated to support NMDA."; + reference + "RFC 8343: A YANG Data Model for Interface Management"; + } + + revision 2014-05-08 { + description + "Initial revision."; + reference + "RFC 7223: A YANG Data Model for Interface Management"; + } + + /* + * Typedefs + */ + + typedef interface-ref { + type leafref { + path "/if:interfaces/if:interface/if:name"; + } + description + "This type is used by data models that need to reference + interfaces."; + } + + /* + * Identities + */ + + identity interface-type { + description + "Base identity from which specific interface types are + derived."; + } + + /* + * Features + */ + + feature arbitrary-names { + description + "This feature indicates that the device allows user-controlled + interfaces to be named arbitrarily."; + } + feature pre-provisioning { + description + "This feature indicates that the device supports + pre-provisioning of interface configuration, i.e., it is + possible to configure an interface whose physical interface + hardware is not present on the device."; + } + feature if-mib { + description + "This feature indicates that the device implements + the IF-MIB."; + reference + "RFC 2863: The Interfaces Group MIB"; + } + + /* + * Data nodes + */ + + container interfaces { + description + "Interface parameters."; + + list interface { + key "name"; + + description + "The list of interfaces on the device. + + The status of an interface is available in this list in the + operational state. If the configuration of a + system-controlled interface cannot be used by the system + (e.g., the interface hardware present does not match the + interface type), then the configuration is not applied to + the system-controlled interface shown in the operational + state. If the configuration of a user-controlled interface + cannot be used by the system, the configured interface is + not instantiated in the operational state. + + System-controlled interfaces created by the system are + always present in this list in the operational state, + whether or not they are configured."; + + leaf name { + type string; + description + "The name of the interface. + + A device MAY restrict the allowed values for this leaf, + possibly depending on the type of the interface. + For system-controlled interfaces, this leaf is the + device-specific name of the interface. + + If a client tries to create configuration for a + system-controlled interface that is not present in the + operational state, the server MAY reject the request if + the implementation does not support pre-provisioning of + interfaces or if the name refers to an interface that can + never exist in the system. A Network Configuration + Protocol (NETCONF) server MUST reply with an rpc-error + with the error-tag 'invalid-value' in this case. + + If the device supports pre-provisioning of interface + configuration, the 'pre-provisioning' feature is + advertised. + + If the device allows arbitrarily named user-controlled + interfaces, the 'arbitrary-names' feature is advertised. + + When a configured user-controlled interface is created by + the system, it is instantiated with the same name in the + operational state. + + A server implementation MAY map this leaf to the ifName + MIB object. Such an implementation needs to use some + mechanism to handle the differences in size and characters + allowed between this leaf and ifName. The definition of + such a mechanism is outside the scope of this document."; + reference + "RFC 2863: The Interfaces Group MIB - ifName"; + } + + leaf description { + type string; + description + "A textual description of the interface. + + A server implementation MAY map this leaf to the ifAlias + MIB object. Such an implementation needs to use some + mechanism to handle the differences in size and characters + allowed between this leaf and ifAlias. The definition of + such a mechanism is outside the scope of this document. + + Since ifAlias is defined to be stored in non-volatile + storage, the MIB implementation MUST map ifAlias to the + value of 'description' in the persistently stored + configuration."; + reference + "RFC 2863: The Interfaces Group MIB - ifAlias"; + } + + leaf type { + type identityref { + base interface-type; + } + mandatory true; + description + "The type of the interface. + + When an interface entry is created, a server MAY + initialize the type leaf with a valid value, e.g., if it + is possible to derive the type from the name of the + interface. + + If a client tries to set the type of an interface to a + value that can never be used by the system, e.g., if the + type is not supported or if the type does not match the + name of the interface, the server MUST reject the request. + A NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf enabled { + type boolean; + default "true"; + description + "This leaf contains the configured, desired state of the + interface. + + Systems that implement the IF-MIB use the value of this + leaf in the intended configuration to set + IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry + has been initialized, as described in RFC 2863. + + Changes in this leaf in the intended configuration are + reflected in ifAdminStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf link-up-down-trap-enable { + if-feature if-mib; + type enumeration { + enum enabled { + value 1; + description + "The device will generate linkUp/linkDown SNMP + notifications for this interface."; + } + enum disabled { + value 2; + description + "The device will not generate linkUp/linkDown SNMP + notifications for this interface."; + } + } + description + "Controls whether linkUp/linkDown SNMP notifications + should be generated for this interface. + + If this node is not configured, the value 'enabled' is + operationally used by the server for interfaces that do + not operate on top of any other interface (i.e., there are + no 'lower-layer-if' entries), and 'disabled' otherwise."; + reference + "RFC 2863: The Interfaces Group MIB - + ifLinkUpDownTrapEnable"; + } + + leaf admin-status { + if-feature if-mib; + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "Not ready to pass packets and not in some test mode."; + } + enum testing { + value 3; + description + "In some test mode."; + } + } + config false; + mandatory true; + description + "The desired state of the interface. + + This leaf has the same read semantics as ifAdminStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf oper-status { + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + + description + "The interface does not pass any packets."; + } + enum testing { + value 3; + description + "In some test mode. No operational packets can + be passed."; + } + enum unknown { + value 4; + description + "Status cannot be determined for some reason."; + } + enum dormant { + value 5; + description + "Waiting for some external event."; + } + enum not-present { + value 6; + description + "Some component (typically hardware) is missing."; + } + enum lower-layer-down { + value 7; + description + "Down due to state of lower-layer interface(s)."; + } + } + config false; + mandatory true; + description + "The current operational state of the interface. + + This leaf has the same semantics as ifOperStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifOperStatus"; + } + + leaf last-change { + type yang:date-and-time; + config false; + description + "The time the interface entered its current operational + state. If the current state was entered prior to the + last re-initialization of the local network management + subsystem, then this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifLastChange"; + } + + leaf if-index { + if-feature if-mib; + type int32 { + range "1..2147483647"; + } + config false; + mandatory true; + description + "The ifIndex value for the ifEntry represented by this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifIndex"; + } + + leaf phys-address { + type yang:phys-address; + config false; + description + "The interface's address at its protocol sub-layer. For + example, for an 802.x interface, this object normally + contains a Media Access Control (MAC) address. The + interface's media-specific modules must define the bit + and byte ordering and the format of the value of this + object. For interfaces that do not have such an address + (e.g., a serial line), this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifPhysAddress"; + } + + leaf-list higher-layer-if { + type interface-ref; + config false; + description + "A list of references to interfaces layered on top of this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf-list lower-layer-if { + type interface-ref; + config false; + + description + "A list of references to interfaces layered underneath this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf speed { + type yang:gauge64; + units "bits/second"; + config false; + description + "An estimate of the interface's current bandwidth in bits + per second. For interfaces that do not vary in + bandwidth or for those where no accurate estimation can + be made, this node should contain the nominal bandwidth. + For interfaces that have no concept of bandwidth, this + node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - + ifSpeed, ifHighSpeed"; + } + + container statistics { + config false; + description + "A collection of interface-related statistics objects."; + + leaf discontinuity-time { + type yang:date-and-time; + mandatory true; + description + "The time on the most recent occasion at which any one or + more of this interface's counters suffered a + discontinuity. If no such discontinuities have occurred + since the last re-initialization of the local management + subsystem, then this node contains the time the local + management subsystem re-initialized itself."; + } + + leaf in-octets { + type yang:counter64; + description + "The total number of octets received on the interface, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; + } + + leaf in-unicast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were not addressed to a + multicast or broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; + } + + leaf in-broadcast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a broadcast + address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInBroadcastPkts"; + } + + leaf in-multicast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a multicast + address at this sub-layer. For a MAC-layer protocol, + this includes both Group and Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInMulticastPkts"; + } + + leaf in-discards { + type yang:counter32; + description + "The number of inbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInDiscards"; + } + + leaf in-errors { + type yang:counter32; + description + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from being + deliverable to a higher-layer protocol. For character- + oriented or fixed-length interfaces, the number of + inbound transmission units that contained errors + preventing them from being deliverable to a higher-layer + protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInErrors"; + } + + leaf in-unknown-protos { + type yang:counter32; + + description + "For packet-oriented interfaces, the number of packets + received via the interface that were discarded because + of an unknown or unsupported protocol. For + character-oriented or fixed-length interfaces that + support protocol multiplexing, the number of + transmission units received via the interface that were + discarded because of an unknown or unsupported protocol. + For any interface that does not support protocol + multiplexing, this counter is not present. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; + } + + leaf out-octets { + type yang:counter64; + description + "The total number of octets transmitted out of the + interface, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; + } + + leaf out-unicast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted and that were not addressed + to a multicast or broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; + } + + leaf out-broadcast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted and that were addressed to a + broadcast address at this sub-layer, including those + that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutBroadcastPkts"; + } + + leaf out-multicast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted and that were addressed to a + multicast address at this sub-layer, including those + that were discarded or not sent. For a MAC-layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutMulticastPkts"; + } + + leaf out-discards { + type yang:counter32; + description + "The number of outbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being transmitted. One possible reason + for discarding such a packet could be to free up buffer + space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; + } + + leaf out-errors { + type yang:counter32; + description + "For packet-oriented interfaces, the number of outbound + packets that could not be transmitted because of errors. + For character-oriented or fixed-length interfaces, the + number of outbound transmission units that could not be + transmitted because of errors. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutErrors"; + } + } + + } + } + + /* + * Legacy typedefs + */ + + typedef interface-state-ref { + type leafref { + path "/if:interfaces-state/if:interface/if:name"; + } + status deprecated; + description + "This type is used by data models that need to reference + the operationally present interfaces."; + } + + /* + * Legacy operational state data nodes + */ + + container interfaces-state { + config false; + status deprecated; + description + "Data nodes for the operational state of interfaces."; + + list interface { + key "name"; + status deprecated; + + description + "The list of interfaces on the device. + + System-controlled interfaces created by the system are + always present in this list, whether or not they are + configured."; + + leaf name { + type string; + status deprecated; + description + "The name of the interface. + + A server implementation MAY map this leaf to the ifName + MIB object. Such an implementation needs to use some + mechanism to handle the differences in size and characters + allowed between this leaf and ifName. The definition of + such a mechanism is outside the scope of this document."; + reference + "RFC 2863: The Interfaces Group MIB - ifName"; + } + + leaf type { + type identityref { + base interface-type; + } + mandatory true; + status deprecated; + description + "The type of the interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf admin-status { + if-feature if-mib; + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "Not ready to pass packets and not in some test mode."; + } + enum testing { + value 3; + description + "In some test mode."; + } + } + mandatory true; + status deprecated; + description + "The desired state of the interface. + + This leaf has the same read semantics as ifAdminStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf oper-status { + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "The interface does not pass any packets."; + } + enum testing { + value 3; + description + "In some test mode. No operational packets can + be passed."; + } + enum unknown { + value 4; + description + "Status cannot be determined for some reason."; + } + enum dormant { + value 5; + description + "Waiting for some external event."; + } + enum not-present { + value 6; + description + "Some component (typically hardware) is missing."; + } + enum lower-layer-down { + value 7; + description + "Down due to state of lower-layer interface(s)."; + } + } + mandatory true; + status deprecated; + description + "The current operational state of the interface. + + This leaf has the same semantics as ifOperStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifOperStatus"; + } + + leaf last-change { + type yang:date-and-time; + status deprecated; + description + "The time the interface entered its current operational + state. If the current state was entered prior to the + last re-initialization of the local network management + subsystem, then this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifLastChange"; + } + + leaf if-index { + if-feature if-mib; + type int32 { + range "1..2147483647"; + } + mandatory true; + status deprecated; + description + "The ifIndex value for the ifEntry represented by this + interface."; + + reference + "RFC 2863: The Interfaces Group MIB - ifIndex"; + } + + leaf phys-address { + type yang:phys-address; + status deprecated; + description + "The interface's address at its protocol sub-layer. For + example, for an 802.x interface, this object normally + contains a Media Access Control (MAC) address. The + interface's media-specific modules must define the bit + and byte ordering and the format of the value of this + object. For interfaces that do not have such an address + (e.g., a serial line), this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifPhysAddress"; + } + + leaf-list higher-layer-if { + type interface-state-ref; + status deprecated; + description + "A list of references to interfaces layered on top of this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf-list lower-layer-if { + type interface-state-ref; + status deprecated; + description + "A list of references to interfaces layered underneath this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf speed { + type yang:gauge64; + units "bits/second"; + status deprecated; + description + "An estimate of the interface's current bandwidth in bits + per second. For interfaces that do not vary in + bandwidth or for those where no accurate estimation can + + be made, this node should contain the nominal bandwidth. + For interfaces that have no concept of bandwidth, this + node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - + ifSpeed, ifHighSpeed"; + } + + container statistics { + status deprecated; + description + "A collection of interface-related statistics objects."; + + leaf discontinuity-time { + type yang:date-and-time; + mandatory true; + status deprecated; + description + "The time on the most recent occasion at which any one or + more of this interface's counters suffered a + discontinuity. If no such discontinuities have occurred + since the last re-initialization of the local management + subsystem, then this node contains the time the local + management subsystem re-initialized itself."; + } + + leaf in-octets { + type yang:counter64; + status deprecated; + description + "The total number of octets received on the interface, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; + } + + leaf in-unicast-pkts { + type yang:counter64; + status deprecated; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were not addressed to a + multicast or broadcast address at this sub-layer. + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; + } + + leaf in-broadcast-pkts { + type yang:counter64; + status deprecated; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a broadcast + address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInBroadcastPkts"; + } + + leaf in-multicast-pkts { + type yang:counter64; + status deprecated; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a multicast + address at this sub-layer. For a MAC-layer protocol, + this includes both Group and Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInMulticastPkts"; + } + + leaf in-discards { + type yang:counter32; + status deprecated; + + description + "The number of inbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInDiscards"; + } + + leaf in-errors { + type yang:counter32; + status deprecated; + description + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from being + deliverable to a higher-layer protocol. For character- + oriented or fixed-length interfaces, the number of + inbound transmission units that contained errors + preventing them from being deliverable to a higher-layer + protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInErrors"; + } + + leaf in-unknown-protos { + type yang:counter32; + status deprecated; + description + "For packet-oriented interfaces, the number of packets + received via the interface that were discarded because + of an unknown or unsupported protocol. For + character-oriented or fixed-length interfaces that + support protocol multiplexing, the number of + transmission units received via the interface that were + discarded because of an unknown or unsupported protocol. + For any interface that does not support protocol + multiplexing, this counter is not present. + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; + } + + leaf out-octets { + type yang:counter64; + status deprecated; + description + "The total number of octets transmitted out of the + interface, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; + } + + leaf out-unicast-pkts { + type yang:counter64; + status deprecated; + description + "The total number of packets that higher-level protocols + requested be transmitted and that were not addressed + to a multicast or broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; + } + + leaf out-broadcast-pkts { + type yang:counter64; + status deprecated; + + description + "The total number of packets that higher-level protocols + requested be transmitted and that were addressed to a + broadcast address at this sub-layer, including those + that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutBroadcastPkts"; + } + + leaf out-multicast-pkts { + type yang:counter64; + status deprecated; + description + "The total number of packets that higher-level protocols + requested be transmitted and that were addressed to a + multicast address at this sub-layer, including those + that were discarded or not sent. For a MAC-layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutMulticastPkts"; + } + + leaf out-discards { + type yang:counter32; + status deprecated; + description + "The number of outbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being transmitted. One possible reason + for discarding such a packet could be to free up buffer + space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; + } + + leaf out-errors { + type yang:counter32; + status deprecated; + description + "For packet-oriented interfaces, the number of outbound + packets that could not be transmitted because of errors. + For character-oriented or fixed-length interfaces, the + number of outbound transmission units that could not be + transmitted because of errors. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutErrors"; + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aaa-radius.yang b/src/plugins/yang/openconfig/openconfig-aaa-radius.yang new file mode 100644 index 0000000..8f82bd4 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aaa-radius.yang @@ -0,0 +1,180 @@ +submodule openconfig-aaa-radius { + + yang-version "1"; + + belongs-to "openconfig-aaa" { + prefix "oc-aaa"; + } + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-aaa-types { prefix oc-aaa-types; } + import openconfig-types { prefix oc-types; } + import openconfig-yang-types { prefix oc-yang; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + related to the RADIUS protocol for authentication, + authorization, and accounting."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + identity RADIUS { + base oc-aaa-types:AAA_SERVER_TYPE; + description + "Remote Authentication Dial In User Service (RADIUS) AAA + server"; + reference + "RFC 2865 - Remote Authentication Dial In User Service + (RADIUS)"; + } + + // typedef statements + + // grouping statements + + grouping aaa-radius-server-config { + description + "Configuration data for a RADIUS server"; + + leaf auth-port { + type oc-inet:port-number; + default 1812; + description + "Port number for authentication requests"; + } + + leaf acct-port { + type oc-inet:port-number; + default 1813; + description + "Port number for accounting requests"; + } + + leaf secret-key { + type oc-types:routing-password; + description + "The unencrypted shared key used between the authentication + server and the device."; + } + + leaf source-address { + type oc-inet:ip-address; + description + "Source IP address to use in messages to the RADIUS server"; + } + + leaf retransmit-attempts { + type uint8; + description + "Number of times the system may resend a request to the + RADIUS server when it is unresponsive"; + } + } + + grouping aaa-radius-server-state { + description + "Operational state data for a RADIUS server"; + + container counters { + description + "A collection of RADIUS related state objects."; + + leaf retried-access-requests { + type oc-yang:counter64; + description + "Retransmitted Access-Request messages."; + } + + leaf access-accepts { + type oc-yang:counter64; + description + "Received Access-Accept messages."; + } + + leaf access-rejects { + type oc-yang:counter64; + description + "Received Access-Reject messages."; + } + + leaf timeout-access-requests { + type oc-yang:counter64; + description + "Access-Request messages that have timed-out, + requiring retransmission."; + } + } + } + + grouping aaa-radius-server-top { + description + "Top-level grouping for RADIUS server data"; + + container radius { + description + "Top-level container for RADIUS server data"; + + container config { + description + "Configuration data for RADIUS servers"; + + uses aaa-radius-server-config; + } + + container state { + + config false; + + description + "Operational state data for RADIUS servers"; + + uses aaa-radius-server-config; + uses aaa-radius-server-state; + } + } + } + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-aaa-tacacs.yang b/src/plugins/yang/openconfig/openconfig-aaa-tacacs.yang new file mode 100644 index 0000000..21d0f4a --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aaa-tacacs.yang @@ -0,0 +1,136 @@ +submodule openconfig-aaa-tacacs { + + yang-version "1"; + + belongs-to "openconfig-aaa" { + prefix "oc-aaa"; + } + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-aaa-types { prefix oc-aaa-types; } + import openconfig-types { prefix oc-types; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + related to the TACACS+ protocol for authentication, + authorization, and accounting."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + identity TACACS { + base oc-aaa-types:AAA_SERVER_TYPE; + description + "Terminal Access Controller Access Control System (TACACS+) + AAA server"; + reference + "The TACACS+ Protocol (draft-ietf-opsawg-tacacs-05) + RFC 1492 - An Access Control Protocol, Sometimes Called + TACACS"; + } + + // typedef statements + + // grouping statements + + grouping aaa-tacacs-server-config { + description + "Configuration data for a TACACS+ server"; + + leaf port { + type oc-inet:port-number; + default 49; + description + "The port number on which to contact the TACACS server"; + } + + leaf secret-key { + type oc-types:routing-password; + description + "The unencrypted shared key used between the authentication + server and the device."; + } + + leaf source-address { + type oc-inet:ip-address; + description + "Source IP address to use in messages to the TACACS server"; + } + } + + grouping aaa-tacacs-server-state { + description + "Operational state data for a TACACS+ server"; + } + + grouping aaa-tacacs-server-top { + description + "Top-level grouping for TACACS+ sever data"; + + container tacacs { + description + "Top-level container for TACACS+ server data"; + + container config { + description + "Configuration data for TACACS+ server"; + + uses aaa-tacacs-server-config; + } + + container state { + + config false; + + description + "Operational state data for TACACS+ server"; + + uses aaa-tacacs-server-config; + uses aaa-tacacs-server-state; + } + } + } + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-aaa-types.yang b/src/plugins/yang/openconfig/openconfig-aaa-types.yang new file mode 100644 index 0000000..41bd5d9 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aaa-types.yang @@ -0,0 +1,162 @@ +module openconfig-aaa-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/aaa/types"; + + prefix "oc-aaa-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines shared types for data related to AAA + (authentication, authorization, accounting)."; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-04-12" { + description + "Add when conditions, correct identities"; + reference "0.4.0"; + } + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // identity statements + + identity AAA_SERVER_TYPE { + description + "Base identity for types of AAA servers"; + } + + + identity SYSTEM_DEFINED_ROLES { + description + "Base identity for system_defined roles that can be assigned + to users."; + } + + identity SYSTEM_ROLE_ADMIN { + base SYSTEM_DEFINED_ROLES; + description + "Built-in role that allows the equivalent of superuser + permission for all configuration and operational commands + on the device."; + } + + identity AAA_ACCOUNTING_EVENT_TYPE { + description + "Base identity for specifying events types that should be + sent to AAA server for accounting"; + } + + identity AAA_ACCOUNTING_EVENT_COMMAND { + base AAA_ACCOUNTING_EVENT_TYPE; + description + "Specifies interactive command events for AAA accounting"; + } + + identity AAA_ACCOUNTING_EVENT_LOGIN { + base AAA_ACCOUNTING_EVENT_TYPE; + description + "Specifies login events for AAA accounting"; + } + + identity AAA_AUTHORIZATION_EVENT_TYPE { + description + "Base identity for specifying activities that should be + sent to AAA server for authorization"; + } + + identity AAA_AUTHORIZATION_EVENT_COMMAND { + base AAA_AUTHORIZATION_EVENT_TYPE; + description + "Specifies interactive command events for AAA authorization"; + } + + identity AAA_AUTHORIZATION_EVENT_CONFIG { + base AAA_AUTHORIZATION_EVENT_TYPE; + description + "Specifies configuration (e.g., EXEC) events for AAA + authorization"; + } + + identity AAA_METHOD_TYPE { + description + "Base identity to define well-known methods for AAA + operations"; + } + + identity TACACS_ALL { + base AAA_METHOD_TYPE; + description + "The group of all TACACS+ servers."; + } + + identity RADIUS_ALL { + base AAA_METHOD_TYPE; + description + "The group of all RADIUS servers."; + } + + identity LOCAL { + base AAA_METHOD_TYPE; + description + "Locally configured method for AAA operations."; + } + + + // typedef statements + + typedef crypt-password-type { + type string; + description + "A password that is hashed based on the hash algorithm + indicated by the prefix in the string. The string + takes the following form, based on the Unix crypt function: + + $[$=(,=)*][$[$]] + + Common hash functions include: + + id | hash function + ---+--------------- + 1 | MD5 + 2a| Blowfish + 2y| Blowfish (correct handling of 8-bit chars) + 5 | SHA-256 + 6 | SHA-512 + + These may not all be supported by a target device."; + } + + +} diff --git a/src/plugins/yang/openconfig/openconfig-aaa.yang b/src/plugins/yang/openconfig/openconfig-aaa.yang new file mode 100644 index 0000000..18a00c5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aaa.yang @@ -0,0 +1,811 @@ +module openconfig-aaa { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/aaa"; + + prefix "oc-aaa"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-aaa-types { prefix oc-aaa-types; } + + include openconfig-aaa-tacacs; + include openconfig-aaa-radius; + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + related to authorization, authentication, and accounting (AAA) + management. + + Portions of this model reuse data definitions or structure from + RFC 7317 - A YANG Data Model for System Management"; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-04-12" { + description + "Add when conditions, correct identities"; + reference "0.4.0"; + } + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + // identity statements + + // grouping statements + grouping aaa-servergroup-common-config { + description + "Configuration data for AAA server groups"; + + leaf name { + type string; + description + "Name for the server group"; + } + + leaf type { + type identityref { + base oc-aaa-types:AAA_SERVER_TYPE; + } + description + "AAA server type -- all servers in the group must be of this + type"; + } + } + + grouping aaa-servergroup-common-state { + description + "Operational state data for AAA server groups"; + + //TODO: add list of group members as opstate + } + + grouping aaa-servergroup-common-top { + description + "Top-level grouping for AAA server groups"; + + container server-groups { + description + "Enclosing container for AAA server groups"; + + list server-group { + key "name"; + description + "List of AAA server groups. All servers in a group + must have the same type as indicated by the server + type."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to configured name of the server group"; + } + + container config { + description + "Configuration data for each server group"; + + uses aaa-servergroup-common-config; + } + + container state { + config false; + + description + "Operational state data for each server group"; + + uses aaa-servergroup-common-config; + uses aaa-servergroup-common-state; + } + + uses aaa-server-top; + } + } + } + + grouping aaa-server-config { + description + "Common configuration data for AAA servers"; + + leaf name { + type string; + description + "Name assigned to the server"; + } + + + leaf address { + type oc-inet:ip-address; + description "Address of the authentication server"; + } + + leaf timeout { + type uint16; + units seconds; + description + "Set the timeout in seconds on responses from the AAA + server"; + } + } + + grouping aaa-server-state { + description + "Common operational state data for AAA servers"; + + leaf connection-opens { + type oc-yang:counter64; + description + "Number of new connection requests sent to the server, e.g. + socket open"; + } + + leaf connection-closes { + type oc-yang:counter64; + description + "Number of connection close requests sent to the server, e.g. + socket close"; + } + + leaf connection-aborts { + type oc-yang:counter64; + description + "Number of aborted connections to the server. These do + not include connections that are close gracefully."; + } + + leaf connection-failures { + type oc-yang:counter64; + description + "Number of connection failures to the server"; + } + + leaf connection-timeouts { + type oc-yang:counter64; + description + "Number of connection timeouts to the server"; + } + + leaf messages-sent { + type oc-yang:counter64; + description + "Number of messages sent to the server"; + } + + leaf messages-received { + type oc-yang:counter64; + description + "Number of messages received by the server"; + } + + leaf errors-received { + type oc-yang:counter64; + description + "Number of error messages received from the server"; + } + + } + + grouping aaa-server-top { + description + "Top-level grouping for list of AAA servers"; + + container servers { + description + "Enclosing container the list of servers"; + + list server { + key "address"; + description + "List of AAA servers"; + + leaf address { + type leafref { + path "../config/address"; + } + description + "Reference to the configured address of the AAA server"; + } + + container config { + description + "Configuration data "; + + uses aaa-server-config; + } + + container state { + config false; + + description + "Operational state data "; + + uses aaa-server-config; + uses aaa-server-state; + } + + uses aaa-tacacs-server-top { + when "../../config/type = 'oc-aaa-types:TACACS'"; + } + + uses aaa-radius-server-top { + when "../../config/type = 'oc-aaa-types:RADIUS'"; + } + } + } + } + + grouping aaa-admin-config { + description + "Configuration data for the system built-in + administrator / root user account"; + + leaf admin-password { + type string; + oc-ext:openconfig-hashed-value; + description + "The admin/root password, supplied as a cleartext string. + The system should hash and only store the password as a + hashed value."; + } + + leaf admin-password-hashed { + type oc-aaa-types:crypt-password-type; + description + "The admin/root password, supplied as a hashed value + using the notation described in the definition of the + crypt-password-type."; + } + } + + grouping aaa-admin-state { + description + "Operational state data for the root user"; + + leaf admin-username { + type string; + description + "Name of the administrator user account, e.g., admin, root, + etc."; + } + } + + grouping aaa-authentication-admin-top { + description + "Top-level grouping for root user configuration and state + data"; + + container admin-user { + description + "Top-level container for the system root or admin user + configuration and operational state"; + + container config { + description + "Configuration data for the root user account"; + + uses aaa-admin-config; + } + + container state { + config false; + + description + "Operational state data for the root user account"; + + uses aaa-admin-config; + uses aaa-admin-state; + } + } + } + grouping aaa-authentication-user-config { + description + "Configuration data for local users"; + + leaf username { + type string; + description + "Assigned username for this user"; + } + + leaf password { + type string; + oc-ext:openconfig-hashed-value; + description + "The user password, supplied as cleartext. The system + must hash the value and only store the hashed value."; + } + + leaf password-hashed { + type oc-aaa-types:crypt-password-type; + description + "The user password, supplied as a hashed value + using the notation described in the definition of the + crypt-password-type."; + } + + leaf ssh-key { + type string; + description + "SSH public key for the user (RSA or DSA)"; + } + + leaf role { + type union { + type string; + type identityref { + base oc-aaa-types:SYSTEM_DEFINED_ROLES; + } + } + description + "Role assigned to the user. The role may be supplied + as a string or a role defined by the SYSTEM_DEFINED_ROLES + identity."; + } + } + + grouping aaa-authentication-user-state { + description + "Operational state data for local users"; + } + + grouping aaa-authentication-user-top { + description + "Top-level grouping for local users"; + + container users { + description + "Enclosing container list of local users"; + + list user { + key "username"; + description + "List of local users on the system"; + + leaf username { + type leafref { + path "../config/username"; + } + description + "References the configured username for the user"; + } + + container config { + description + "Configuration data for local users"; + + uses aaa-authentication-user-config; + } + + container state { + config false; + + description + "Operational state data for local users"; + + uses aaa-authentication-user-config; + uses aaa-authentication-user-state; + } + } + + } + } + + grouping aaa-accounting-methods-common { + description + "Common definitions for accounting methods"; + + leaf-list accounting-method { + type union { + type identityref { + base oc-aaa-types:AAA_METHOD_TYPE; + } + type string; + //TODO: in YANG 1.1 this should be converted to a leafref to + //point to the server group name. + } + ordered-by user; + description + "An ordered list of methods used for AAA accounting for this + event type. The method is defined by the destination for + accounting data, which may be specified as the group of + all TACACS+/RADIUS servers, a defined server group, or + the local system."; + } + } + + + grouping aaa-accounting-events-config { + description + "Configuration data for AAA accounting events"; + + leaf event-type { + type identityref { + base oc-aaa-types:AAA_ACCOUNTING_EVENT_TYPE; + } + description + "The type of activity to record at the AAA accounting + server"; + } + + leaf record { + type enumeration { + enum START_STOP { + description + "Send START record to the accounting server at the + beginning of the activity, and STOP record at the + end of the activity."; + } + enum STOP { + description + "Send STOP record to the accounting server when the + user activity completes"; + } + } + description + "Type of record to send to the accounting server for this + activity type"; + } + } + + grouping aaa-accounting-events-state { + description + "Operational state data for accounting events"; + } + + grouping aaa-accounting-events-top { + description + "Top-level grouping for accounting events"; + + container events { + description + "Enclosing container for defining handling of events + for accounting"; + + list event { + key "event-type"; + description + "List of events subject to accounting"; + + leaf event-type { + type leafref { + path "../config/event-type"; + } + description + "Reference to the event-type being logged at the + accounting server"; + } + + container config { + description + "Configuration data for accounting events"; + + uses aaa-accounting-events-config; + } + + container state { + config false; + + description + "Operational state data for accounting events"; + + uses aaa-accounting-events-config; + uses aaa-accounting-events-state; + } + } + } + } + + grouping aaa-accounting-config { + description + "Configuration data for event accounting"; + + uses aaa-accounting-methods-common; + + } + + grouping aaa-accounting-state { + description + "Operational state data for event accounting services"; + } + + grouping aaa-accounting-top { + description + "Top-level grouping for user activity accounting"; + + container accounting { + description + "Top-level container for AAA accounting"; + + container config { + description + "Configuration data for user activity accounting."; + + uses aaa-accounting-config; + } + + container state { + config false; + + description + "Operational state data for user accounting."; + + uses aaa-accounting-config; + uses aaa-accounting-state; + } + + uses aaa-accounting-events-top; + + } + } + + grouping aaa-authorization-methods-config { + description + "Common definitions for authorization methods for global + and per-event type"; + + leaf-list authorization-method { + type union { + type identityref { + base oc-aaa-types:AAA_METHOD_TYPE; + } + type string; + } + ordered-by user; + description + "Ordered list of methods for authorizing commands. The first + method that provides a response (positive or negative) should + be used. The list may contain a well-defined method such + as the set of all TACACS or RADIUS servers, or the name of + a defined AAA server group. The system must validate + that the named server group exists."; + } + } + + grouping aaa-authorization-events-config { + description + "Configuration data for AAA authorization events"; + + leaf event-type { + type identityref { + base oc-aaa-types:AAA_AUTHORIZATION_EVENT_TYPE; + } + description + "The type of event to record at the AAA authorization + server"; + } + } + + grouping aaa-authorization-events-state { + description + "Operational state data for AAA authorization events"; + } + + grouping aaa-authorization-events-top { + description + "Top-level grouping for authorization events"; + + container events { + description + "Enclosing container for the set of events subject + to authorization"; + + list event { + key "event-type"; + description + "List of events subject to AAA authorization"; + + leaf event-type { + type leafref { + path "../config/event-type"; + } + description + "Reference to the event-type list key"; + } + + container config { + description + "Configuration data for each authorized event"; + + uses aaa-authorization-events-config; + } + + container state { + config false; + + description + "Operational state data for each authorized activity"; + + uses aaa-authorization-events-config; + uses aaa-authorization-events-state; + } + } + } + } + + grouping aaa-authorization-config { + description + "Configuration data for AAA authorization"; + + uses aaa-authorization-methods-config; + } + + grouping aaa-authorization-state { + description + "Operational state data for AAA authorization"; + } + + grouping aaa-authorization-top { + description + "Top-level grouping for AAA authorization"; + + container authorization { + description + "Top-level container for AAA authorization configuration + and operational state data"; + + container config { + description + "Configuration data for authorization based on AAA + methods"; + + uses aaa-authorization-config; + } + + container state { + config false; + + description + "Operational state data for authorization based on AAA"; + + uses aaa-authorization-config; + uses aaa-authorization-state; + } + + uses aaa-authorization-events-top; + + } + } + + grouping aaa-authentication-config { + description + "Configuration data for global authentication"; + + leaf-list authentication-method { + type union { + type identityref { + base oc-aaa-types:AAA_METHOD_TYPE; + } + type string; + //TODO: string should be a leafref to a defined + //server group. this will be possible in YANG 1.1 + //type leafref { + //path "/aaa/server-groups/server-group/config/name"; + //} + } + ordered-by user; + description + "Ordered list of authentication methods for users. This + can be either a reference to a server group, or a well- + defined designation in the AAA_METHOD_TYPE identity. If + authentication fails with one method, the next defined + method is tried -- failure of all methods results in the + user being denied access."; + } + } + + grouping aaa-authentication-state { + description + "Operational state data for global authentication"; + } + + grouping aaa-authentication-top { + description + "Top-level grouping for top-level authentication"; + + container authentication { + description + "Top-level container for global authentication data"; + + container config { + description + "Configuration data for global authentication services"; + + uses aaa-authentication-config; + } + + container state { + config false; + + description + "Operational state data for global authentication + services"; + + uses aaa-authentication-config; + uses aaa-authentication-state; + } + + uses aaa-authentication-admin-top; + uses aaa-authentication-user-top; + } + } + + grouping aaa-config { + description + "Configuration data for top level AAA"; + } + + grouping aaa-state { + description + "Operational state data for top level AAA"; + } + + grouping aaa-top { + description + "Top-level grouping for AAA services"; + + container aaa { + description + "Top-level container for AAA services"; + + container config { + description + "Configuration data for top level AAA services"; + + uses aaa-config; + } + + container state { + config false; + + description + "Operational state data for top level AAA services "; + + uses aaa-config; + uses aaa-state; + } + + uses aaa-authentication-top; + uses aaa-authorization-top; + uses aaa-accounting-top; + uses aaa-servergroup-common-top; + + } + } + + + + // data definition statements + + +} diff --git a/src/plugins/yang/openconfig/openconfig-access-points.yang b/src/plugins/yang/openconfig/openconfig-access-points.yang new file mode 100644 index 0000000..7665814 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-access-points.yang @@ -0,0 +1,168 @@ +module openconfig-access-points { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/wifi/access-points"; + + // Assign this module a prefix to be used by other modules, when imported. + prefix "access-points"; + + // Imports + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-wifi-phy { prefix wifi-phy; } + import openconfig-wifi-mac { prefix wifi-mac; } + import openconfig-system { prefix oc-sys; } + + // Meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines the top level WiFi Configurations for a list of + Access Points."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-02-14" { + description + "Initial version"; + reference "0.1.0"; + } + + grouping assigned-ap-managers-config { + description + "AP Manager(s) an AP may join. If cloud manager, this will be + the cloud instance(s). This is often referred to as 'Controller'."; + + leaf id { + type string; + description + "The unique reference for the AP manager described in the list entry."; + } + + leaf fqdn { + type oc-inet:domain-name; + description + "The FQDN of a manager this AP is assigned to. The list should be + ordered, according to priority. eg Primary first, + Secondary second, Tertiary third etc."; + } + + leaf ap-manager-ipv4-address { + type oc-inet:ipv4-address; + description + "IPv4 address of a manager for this AP. The list should be + ordered, according to priority. eg. Primary first, Secondary second, + Tertiary third etc."; + } + + leaf-list ap-manager-ipv6-address { + type oc-inet:ipv6-address; + description + "IPv6 address of a manager for this AP. The list should be + ordered, according to priority. eg. Primary first, Secondary second, + Tertiary third etc."; + } + } + + grouping assigned-ap-managers-state { + description + "Manager(s) an AP may join. If cloud manager, this will be + the cloud instance(s)."; + + leaf joined { + type boolean; + description + "True only if this AP is currently joined to a manager. If this AP + is configured to join manager(s), however is not currently joined + to any manager, this MUST return False."; + } + } + + grouping manager-ap-parameters-top { + description + "Top-level grouping for assigning AP's to manager(s)."; + + container assigned-ap-managers { + description + "Wireless manager(s) this AP is assigned to. eg. Primary + Secondary, Tertiary etc."; + + list ap-manager { + key "id"; + description + "Manager(s) this AP is assinged to, referenced by id."; + + leaf id { + type leafref { + path "../config/id"; + } + description + "id serves as a reference point to the [1-n] manager(s) this AP + is assigned to."; + } + + container config { + description + "Config. container for assigning APs to managers."; + + uses assigned-ap-managers-config; + } + + container state { + config false; + description + "State container for APs assigned to managers."; + + uses assigned-ap-managers-config; + uses assigned-ap-managers-state; + } + } + } + } + + grouping access-points-top { + description + "Top-level grouping for AP configuration & state data."; + + container access-points { + description + "Top most container for configuration and state data for Access + Points."; + + list access-point { + key "hostname"; + description + "Configuration and state data for the access point referenced in the + list entry."; + + leaf hostname { + type oc-inet:domain-name; + description + "AP FQDN"; + } + + uses wifi-phy:radio-top; + uses wifi-mac:ssid-top; + uses wifi-mac:bssid-counters-top; + uses oc-sys:system-top; + uses manager-ap-parameters-top; + } + } + } + uses access-points-top; + + // hostname is set using openconfig-wifi-aps model. + deviation /oc-sys:system/oc-sys:config/oc-sys:hostname { + deviate not-supported; + } + + deviation /oc-sys:system/oc-sys:state/oc-sys:hostname { + deviate not-supported; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-acl.yang b/src/plugins/yang/openconfig/openconfig-acl.yang new file mode 100644 index 0000000..aa069cd --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-acl.yang @@ -0,0 +1,837 @@ +module openconfig-acl { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/acl"; + + prefix "oc-acl"; + + import openconfig-packet-match { prefix oc-match; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state + data for network access control lists (i.e., filters, rules, + etc.). ACLs are organized into ACL sets, with each set + containing one or more ACL entries. ACL sets are identified + by a unique name, while each entry within a set is assigned + a sequence-id that determines the order in which the ACL + rules are applied to a packet. Note that ACLs are evaluated + in ascending order based on the sequence-id (low to high). + + Individual ACL rules specify match criteria based on fields in + the packet, along with an action that defines how matching + packets should be handled. Entries have a type that indicates + the type of match criteria, e.g., MAC layer, IPv4, IPv6, etc."; + + oc-ext:openconfig-version "1.0.1"; + + revision "2018-04-24" { + description + "Clarified order of ACL evaluation"; + reference "1.0.1"; + } + + revision "2017-05-26" { + description + "Separated ACL entries by type"; + reference "1.0.0"; + } + + revision "2016-08-08" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + revision "2016-01-22" { + description + "Initial revision"; + reference "TBD"; + } + + + identity ACL_TYPE { + description + "Base identity for types of ACL sets"; + } + + identity ACL_IPV4 { + base ACL_TYPE; + description + "IP-layer ACLs with IPv4 addresses"; + } + + identity ACL_IPV6 { + base ACL_TYPE; + description + "IP-layer ACLs with IPv6 addresses"; + } + + identity ACL_L2 { + base ACL_TYPE; + description + "MAC-layer ACLs"; + } + + identity ACL_MIXED { + base ACL_TYPE; + description + "Mixed-mode ACL that specifies L2 and L3 protocol + fields. This ACL type is not implemented by many + routing/switching devices."; + } + + // ACL action type + + identity FORWARDING_ACTION { + description + "Base identity for actions in the forwarding category"; + } + + identity ACCEPT { + base FORWARDING_ACTION; + description + "Accept the packet"; + } + + identity DROP { + base FORWARDING_ACTION; + description + "Drop packet without sending any ICMP error message"; + } + + identity REJECT { + base FORWARDING_ACTION; + description + "Drop the packet and send an ICMP error message to the source"; + } + + identity LOG_ACTION { + description + "Base identity for defining the destination for logging + actions"; + } + + identity LOG_SYSLOG { + base LOG_ACTION; + description + "Log the packet in Syslog"; + } + + identity LOG_NONE { + base LOG_ACTION; + description + "No logging"; + } + + identity ACL_COUNTER_CAPABILITY { + description + "Base identity for system to indicate how it is able to report + counters"; + } + + identity INTERFACE_ONLY { + base ACL_COUNTER_CAPABILITY; + description + "ACL counters are available and reported only per interface"; + } + + identity AGGREGATE_ONLY { + base ACL_COUNTER_CAPABILITY; + description + "ACL counters are aggregated over all interfaces, and reported + only per ACL entry"; + } + + identity INTERFACE_AGGREGATE { + base ACL_COUNTER_CAPABILITY; + description + "ACL counters are reported per interface, and also aggregated + and reported per ACL entry."; + } + + // grouping statements + + // input interface + grouping input-interface-config { + description + "Config of interface"; + + } + + grouping input-interface-state { + description + "State information of interface"; + } + + grouping input-interface-top { + description + "Input interface top level container"; + + container input-interface { + description + "Input interface container"; + + container config { + description + "Config data"; + uses input-interface-config; + } + + container state { + config false; + description + "State information"; + uses input-interface-config; + uses input-interface-state; + } + + uses oc-if:interface-ref; + + } + } + + // Action Type + grouping action-config { + description + "Config of action type"; + + + leaf forwarding-action { + type identityref { + base FORWARDING_ACTION; + } + mandatory true; + description + "Specifies the forwarding action. One forwarding action + must be specified for each ACL entry"; + } + + leaf log-action { + type identityref { + base LOG_ACTION; + } + default LOG_NONE; + description + "Specifies the log action and destination for + matched packets. The default is not to log the + packet."; + } + + + } + + grouping action-state { + description + "State information of action type"; + + } + + grouping action-top { + description + "ACL action type top level container"; + + container actions { + description + "Enclosing container for list of ACL actions associated + with an entry"; + + container config { + description + "Config data for ACL actions"; + uses action-config; + } + + container state { + config false; + description + "State information for ACL actions"; + uses action-config; + uses action-state; + } + } + } + + grouping acl-counters-state { + description + "Common grouping for ACL counters"; + + leaf matched-packets { + type oc-yang:counter64; + description + "Count of the number of packets matching the current ACL + entry. + + An implementation should provide this counter on a + per-interface per-ACL-entry if possible. + + If an implementation only supports ACL counters per entry + (i.e., not broken out per interface), then the value + should be equal to the aggregate count across all interfaces. + + An implementation that provides counters per entry per + interface is not required to also provide an aggregate count, + e.g., per entry -- the user is expected to be able implement + the required aggregation if such a count is needed."; + } + + leaf matched-octets { + type oc-yang:counter64; + description + "Count of the number of octets (bytes) matching the current + ACL entry. + + An implementation should provide this counter on a + per-interface per-ACL-entry if possible. + + If an implementation only supports ACL counters per entry + (i.e., not broken out per interface), then the value + should be equal to the aggregate count across all interfaces. + + An implementation that provides counters per entry per + interface is not required to also provide an aggregate count, + e.g., per entry -- the user is expected to be able implement + the required aggregation if such a count is needed."; + } + + } + + // Access List Entries + grouping access-list-entries-config { + description + "Access List Entries (ACE) config."; + + leaf sequence-id { + type uint32; + description + "The sequence id determines the order in which ACL entries + are applied. The sequence id must be unique for each entry + in an ACL set. Target devices should apply the ACL entry + rules in ascending order determined by sequence id (low to + high), rather than the relying only on order in the list."; + } + + leaf description { + type string; + description + "A user-defined description, or comment, for this Access List + Entry."; + } + + } + + grouping access-list-entries-state { + description + "Access List Entries state."; + + uses acl-counters-state; + + } + + grouping access-list-entries-top { + description + "Access list entries to level container"; + + container acl-entries { + description + "Access list entries container"; + + list acl-entry { + key "sequence-id"; + description + "List of ACL entries comprising an ACL set"; + + leaf sequence-id { + type leafref { + path "../config/sequence-id"; + } + description + "references the list key"; + } + + container config { + description + "Access list entries config"; + uses access-list-entries-config; + } + + container state { + config false; + description + "State information for ACL entries"; + uses access-list-entries-config; + uses access-list-entries-state; + } + + uses oc-match:ethernet-header-top { + when "../../config/type='ACL_L2'" { + description + "MAC-layer fields are valid when the ACL type is L2"; + } + } + uses oc-match:ipv4-protocol-fields-top { + when "../../config/type='ACL_IPV4'" { + description + "IPv4-layer fields are valid when the ACL type is + IPv4"; + } + } + uses oc-match:ipv6-protocol-fields-top { + when "../../config/type='ACL_IPV6'" { + description + "IPv6-layer fields are valid when the ACL type is + IPv6"; + } + } + uses oc-match:transport-fields-top { + when "../../config/type='ACL_IPV6' or " + + "../../config/type='ACL_IPV4'" { + description + "Transport-layer fields are valid when specifying + L3 ACL types"; + } + } + uses input-interface-top; + + uses action-top; + } + } + } + + grouping acl-set-config { + description + "Access Control List config"; + + leaf name { + type string; + description + "The name of the access-list set"; + } + + leaf type { + type identityref { + base ACL_TYPE; + } + description + "The type determines the fields allowed in the ACL entries + belonging to the ACL set (e.g., IPv4, IPv6, etc.)"; + } + + leaf description { + type string; + description + "Description, or comment, for the ACL set"; + } + + } + + grouping acl-set-state { + description + "Access Control List state"; + } + + grouping acl-set-top { + description + "Access list entries variables top level container"; + + container acl-sets { + description + "Access list entries variables enclosing container"; + + list acl-set { + key "name type"; + description + "List of ACL sets, each comprising of a list of ACL + entries"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the name list key"; + } + + leaf type { + type leafref { + path "../config/type"; + } + description + "Reference to the type list key"; + } + + container config { + description + "Access list config"; + uses acl-set-config; + } + + container state { + config false; + description + "Access list state information"; + uses acl-set-config; + uses acl-set-state; + } + uses access-list-entries-top; + } + } + } + + grouping interface-acl-entries-config { + description + "Configuration data for per-interface ACLs"; + + } + + grouping interface-acl-entries-state { + description + "Operational state data for per-interface ACL entries"; + + leaf sequence-id { + type leafref { + path "/acl/acl-sets/" + + "acl-set[name=current()/../../../../set-name]" + + "[type=current()/../../../../type]/" + + "acl-entries/acl-entry/sequence-id"; + } + description + "Reference to an entry in the ACL set applied to an + interface"; + } + + uses acl-counters-state; + + } + + grouping interface-acl-entries-top { + description + "Top-level grouping for per-interface ACL entries"; + + container acl-entries { + config false; + description + "Enclosing container for list of references to ACLs"; + + list acl-entry { + key "sequence-id"; + description + "List of ACL entries assigned to an interface"; + + leaf sequence-id { + type leafref { + path "../state/sequence-id"; + } + description + "Reference to per-interface acl entry key"; + } + + // no config container since the enclosing container is + // read-only + + container state { + + config false; + + description + "Operational state data for per-interface ACL entries"; + + uses interface-acl-entries-config; + uses interface-acl-entries-state; + } + } + } + } + + grouping interface-ingress-acl-config { + description + "Configuration data for per-interface ingress ACLs"; + + leaf set-name { + type leafref { + path "../../../../../../acl-sets/acl-set/config/name"; + } + description + "Reference to the ACL set name applied on ingress"; + } + + leaf type { + type leafref { + path "../../../../../../acl-sets/acl-set[name=current()/../set-name]" + + "/config/type"; + } + description + "Reference to the ACL set type applied on ingress"; + } + } + + grouping interface-ingress-acl-state { + description + "Operational state data for the per-interface ingress ACL"; + } + + grouping interface-ingress-acl-top { + description + "Top-level grouping for per-interface ingress ACL data"; + + container ingress-acl-sets { + description + "Enclosing container the list of ingress ACLs on the + interface"; + + list ingress-acl-set { + key "set-name type"; + description + "List of ingress ACLs on the interface"; + + leaf set-name { + type leafref { + path "../config/set-name"; + } + description + "Reference to set name list key"; + } + + leaf type { + type leafref { + path "../config/type"; + } + description + "Reference to type list key"; + } + + container config { + description + "Configuration data "; + + uses interface-ingress-acl-config; + } + + container state { + + config false; + + description + "Operational state data for interface ingress ACLs"; + + uses interface-ingress-acl-config; + uses interface-ingress-acl-state; + } + + uses interface-acl-entries-top; + } + } + } + + grouping interface-egress-acl-config { + description + "Configuration data for per-interface egress ACLs"; + + leaf set-name { + type leafref { + path "../../../../../../acl-sets/acl-set/config/name"; + } + description + "Reference to the ACL set name applied on egress"; + } + + leaf type { + type leafref { + path "../../../../../../acl-sets/acl-set[name=current()/../set-name]" + + "/config/type"; + } + description + "Reference to the ACL set type applied on egress."; + } + } + + grouping interface-egress-acl-state { + description + "Operational state data for the per-interface egress ACL"; + } + + grouping interface-egress-acl-top { + description + "Top-level grouping for per-interface egress ACL data"; + + container egress-acl-sets { + description + "Enclosing container the list of egress ACLs on the + interface"; + + list egress-acl-set { + key "set-name type"; + description + "List of egress ACLs on the interface"; + + leaf set-name { + type leafref { + path "../config/set-name"; + } + description + "Reference to set name list key"; + } + + leaf type { + type leafref { + path "../config/type"; + } + description + "Reference to type list key"; + } + + container config { + description + "Configuration data "; + + uses interface-egress-acl-config; + } + + container state { + + config false; + + description + "Operational state data for interface egress ACLs"; + + uses interface-egress-acl-config; + uses interface-egress-acl-state; + } + + uses interface-acl-entries-top; + } + } + } + + grouping acl-interfaces-config { + description + "Configuration data for interface references"; + + leaf id { + type oc-if:interface-id; + description + "User-defined identifier for the interface -- a common + convention could be '.'"; + } + } + + grouping acl-interfaces-state { + description + "Operational state data for interface references"; + } + + grouping acl-interfaces-top { + description + "Top-level grouping for interface-specific ACL data"; + + container interfaces { + description + "Enclosing container for the list of interfaces on which + ACLs are set"; + + list interface { + key "id"; + description + "List of interfaces on which ACLs are set"; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to the interface id list key"; + } + + container config { + description + "Configuration for ACL per-interface data"; + + uses acl-interfaces-config; + } + + container state { + + config false; + + description + "Operational state for ACL per-interface data"; + + uses acl-interfaces-config; + uses acl-interfaces-state; + } + + uses oc-if:interface-ref; + uses interface-ingress-acl-top; + uses interface-egress-acl-top; + } + } + } + + grouping acl-config { + description + "Global configuration data for ACLs"; + } + + grouping acl-state { + description + "Global operational state data for ACLs"; + + leaf counter-capability { + type identityref { + base ACL_COUNTER_CAPABILITY; + } + description + "System reported indication of how ACL counters are reported + by the target"; + } + } + grouping acl-top { + description + "Top level grouping for ACL data and structure"; + + container acl { + description + "Top level enclosing container for ACL model config + and operational state data"; + + container config { + description + "Global config data for ACLs"; + + uses acl-config; + } + + container state { + + config false; + + description + "Global operational state data for ACLs"; + + uses acl-config; + uses acl-state; + } + + uses acl-set-top; + uses acl-interfaces-top; + } + } + + // data definition statements + uses acl-top; + + // augment statements + + +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-common.yang b/src/plugins/yang/openconfig/openconfig-aft-common.yang new file mode 100644 index 0000000..c2b884f --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-common.yang @@ -0,0 +1,385 @@ +submodule openconfig-aft-common { + belongs-to "openconfig-aft" { + prefix "oc-aft"; + } + + import openconfig-interfaces { prefix "oc-if"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-yang-types { prefix "oc-yang"; } + import openconfig-inet-types { prefix "oc-inet"; } + import openconfig-mpls-types { prefix "oc-mplst"; } + import openconfig-policy-types { prefix "oc-pol-types"; } + import openconfig-aft-types { prefix "oc-aftt"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Submodule containing definitions of groupings that are re-used + across multiple contexts within the AFT model."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + grouping aft-nhop-structural { + description + "Structural grouping describing a next-hop entry."; + + container next-hops { + description + "The list of next-hops that are to be used for entry within + the AFT table. The structure of each next-hop is address + family independent, such that it is possible to resolve fully + how the next-hop is treated. For example: + + - Where ingress IPv4 unicast packets are to be forwarded via + an MPLS LSP, the next-hop list should indicate the MPLS + label stack that is used to the next-hop. + - Where ingress MPLS labelled packets are to be forwarded to + an IPv6 nexthop (for example, a CE within a VPN, then the + popped label stack, and IPv6 next-hop address should be + indicated)."; + + list next-hop { + key "index"; + + description + "A next-hop associated with the forwarding instance."; + + leaf index { + type leafref { + path "../config/index"; + } + description + "A unique index identifying the next-hop entry for the + AFT entry"; + + } + + container config { + description + "Configuration parameters relating to the AFT next-hop + entry"; + + uses aft-common-entry-nexthop-config; + } + + container state { + config false; + description + "Operational state parameters relating to the AFT + next-hop entry"; + + uses aft-common-entry-nexthop-config; + uses aft-common-entry-nexthop-state; + } + + uses oc-if:interface-ref; + } + } + } + + grouping aft-common-entry-state { + description + "Operational state parameters relating to a forwarding entry"; + + leaf packets-forwarded { + type oc-yang:counter64; + description + "The number of packets which have matched, and been forwarded, + based on the AFT entry."; + } + + leaf octets-forwarded { + type oc-yang:counter64; + description + "The number of octets which have matched, and been forwarded, + based on the AFT entry"; + } + + // We are at $afi/$entry/state/next-hop-group + leaf next-hop-group { + type leafref { + path "../../../../next-hop-groups/next-hop-group/state/id"; + } + description + "A reference to the next-hop-group that is in use for the entry + within the AFT. Traffic is distributed across the set of next-hops + within the next-hop group according to the weight."; + } + } + + grouping aft-common-entry-nexthop-config { + description + "Configuration parameters relating to a next-hop entry for a AFT + entry"; + + leaf index { + type uint64; + description + "A unique entry for the next-hop."; + } + } + + grouping aft-common-entry-nexthop-state { + description + "Parameters relating to a next-hop."; + + leaf ip-address { + type oc-inet:ip-address; + description + "The IP address of the next-hop system."; + } + + leaf mac-address { + type oc-yang:mac-address; + description + "The MAC address of the next-hop if resolved by the local + network instance."; + } + + leaf-list pushed-mpls-label-stack { + type oc-mplst:mpls-label; + ordered-by user; + description + "The MPLS label stack imposed when forwarding packets to the + next-hop + - the stack is encoded as a leaf list whereby the order of the + entries is such that the first entry in the list is the + label at the bottom of the stack to be pushed. + + To this end, a packet which is to forwarded to a device using + a service label of 42, and a transport label of 8072 will be + represented with a label stack list of [42, 8072]. + + The MPLS label stack list is ordered by the user, such that no + system re-ordering of leaves is permitted by the system. + + A swap operation is reflected by entries in the + popped-mpls-label-stack and pushed-mpls-label-stack nodes."; + + } + + leaf encapsulate-header { + type oc-aftt:encapsulation-header-type; + description + "When forwarding a packet to the specified next-hop the local + system performs an encapsulation of the packet - adding the + specified header type."; + } + + leaf origin-protocol { + type identityref { + base "oc-pol-types:INSTALL_PROTOCOL_TYPE"; + } + description + "The protocol from which the AFT entry was learned."; + } + } + + grouping aft-common-ip-state { + description + "Common parameters across IP address families"; + + leaf decapsulate-header { + type oc-aftt:encapsulation-header-type; + description + "When forwarding a packet to the specified next-hop, the local + system performs a decapsulation of the packet - removing the + specified header type. In the case that no next-hop is + specified, the packet header is removed, and a subsequent + forwarding lookup is performed on the packet encapsulated + within the header, matched within the relevant AFT within the + specified network-instance."; + } + } + + grouping aft-next-hop-groups-structural { + description + "Logical grouping for groups of next-hops."; + + container next-hop-groups { + description + "Surrounding container for groups of next-hops."; + + list next-hop-group { + key "id"; + + description + "An individual set of next-hops grouped into a common group. + Each entry within an abstract forwarding table points to a + next-hop-group. Entries in the next-hop-group are forwarded to + according to the weights specified for each next-hop group. + + If an entry within the next-hop group becomes unusable, for + example due to an interface failure, the remaining entries + are used until all entries become unusable - at which point + the backup next-hop-group (if specified) is used."; + + leaf id { + description + "A reference to a unique identifier for the next-hop-group."; + + type leafref { + path "../config/id"; + } + } + + container config { + description + "Configuration parameters related to the next-hop-group."; + uses aft-nhg-config; + } + + container state { + config false; + description + "Operational state parameters relating to next-hop-groups."; + uses aft-nhg-config; + uses aft-nhg-state; + } + + container next-hops { + description + "Surrounding container for the list of next-hops within + the next-hop-group."; + + list next-hop { + key "index"; + + description + "An individual next-hop within the next-hop-group. Each + next-hop is a reference to an entry within the next-hop + list."; + + leaf index { + description + "A reference to the index for the next-hop within the + the next-hop-group."; + type leafref { + path "../config/index"; + } + } + + container config { + description + "Configuration parameters related to a next-hop within + the next-hop-group."; + uses aft-nhg-nh-config; + } + + container state { + config false; + description + "Operational state parameters related to a next-hop + within the next-hop-group."; + uses aft-nhg-nh-config; + uses aft-nhg-nh-state; + } + } + } + } + } + } + + grouping aft-nhg-config { + description + "Configuration parameters related to a next-hop-group."; + + leaf id { + type uint64; + description + "A unique identifier for the next-hop-group. This index + is not expected to be consistent across reboots, or + reprogramming of the next-hop-group. When updating + a next-hop-group, if the group is removed by the system + or assigned an alternate identifier, the system should + send telemetry notifications deleting the previous + identifier. If the identifier of the next-hop-group + is changed, all AFT entries that reference it must + also be updated."; + } + } + + grouping aft-nhg-state { + description + "Operational state parameters related to a next-hop-group."; + + leaf color { + type uint64; + description + + "An arbitrary colour that is used as an identifier for the next-hop + group. Some next-hop resolutions may utilise the colour to select + the particular next-hop-group that a routing entry should be resolved + to. In this case, next-hop-group selection may be based on colour + matches rather than the protocol specified next-hop. + + Regardless of whether the next-hop-group's specified colour is + used to select an AFT's active forwarding entry, the next-hop-group + referenced by an entry should be the currently active value. + + Next-hop-groups that are installed on the system through a protocol + that allows injection of such entries (e.g., BGP using the SR-TE + Policy SAFI, or gRPC-based RIB programming) should have the colour + specified in the injecting protocol within this leaf."; + } + + leaf backup-next-hop-group { + // We are at afts/next-hop-groups/next-hop-group/config/backup-next-hop-group + type leafref { + path "../../../next-hop-group/state/id"; + } + description + "The backup next-hop-group for the current group. When all + entries within the next-hop group become unusable, the backup + next-hop group is used if specified."; + } + } + + grouping aft-nhg-nh-config { + description + "Configuration parameters relating to an individual next-hop within + a next-hop-group."; + + leaf index { + type leafref { + // We are at afts/next-hop-groups/next-hop-group/next-hops/next-hop/config/id + path "../../../../../../next-hops/next-hop/config/index"; + } + description + "A reference to the identifier for the next-hop to which + the entry in the next-hop group corresponds."; + } + } + + grouping aft-nhg-nh-state { + description + "Operational state parameters relating to an individual next-hop + within the next-hop-group."; + + leaf weight { + type uint64; + description + "The weight applied to the next-hop within the group. Traffic + is balanced across the next-hops within the group in the + proportion of weight/(sum of weights of the next-hops within + the next-hop group)."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-ethernet.yang b/src/plugins/yang/openconfig/openconfig-aft-ethernet.yang new file mode 100644 index 0000000..714a059 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-ethernet.yang @@ -0,0 +1,93 @@ +submodule openconfig-aft-ethernet { + belongs-to "openconfig-aft" { + prefix "oc-aft"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-yang-types { prefix "oc-yang"; } + + // Include common cross-AFT groupings from the common submodule. + include openconfig-aft-common; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Submodule containing definitions of groupings for the abstract + forwarding tables for Ethernet."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + grouping aft-ethernet-structural { + description + "Structural grouping defining the schema for the Ethernet + abstract forwarding table."; + + list mac-entry { + key "mac-address"; + + description + "List of the Ethernet entries within the abstract + forwarding table. This list is keyed by the outer MAC address + of the Ethernet frame."; + + leaf mac-address { + type leafref { + path "../config/mac-address"; + } + description + "Reference to the outer MAC address matched by the + entry."; + } + + container config { + description + "Configuration parameters for the Ethernet AFT entry."; + uses aft-ethernet-entry-config; + } + + container state { + config false; + description + "Operational state parameters for the Ethernet AFT + entry."; + uses aft-ethernet-entry-config; + uses aft-ethernet-entry-state; + } + } + } + + grouping aft-ethernet-entry-config { + description + "Configuration parameters for the Ethernet AFT entry."; + + leaf mac-address { + type oc-yang:mac-address; + description + "The outer MAC address of the Ethernet frame that must + be matched for the AFT entry to be utilised."; + } + } + + grouping aft-ethernet-entry-state { + description + "Operational state parameters for the Ethernet AFT entry."; + uses aft-common-entry-state; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-ipv4.yang b/src/plugins/yang/openconfig/openconfig-aft-ipv4.yang new file mode 100644 index 0000000..20f8992 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-ipv4.yang @@ -0,0 +1,94 @@ +submodule openconfig-aft-ipv4 { + belongs-to "openconfig-aft" { + prefix "oc-aft"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-inet-types { prefix "oc-inet"; } + + // Include common cross-AFT groupings from the common submodule. + include openconfig-aft-common; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Submodule containing definitions of groupings for the abstract + forwarding tables for IPv4."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + grouping aft-ipv4-unicast-structural { + description + "Structural grouping defining the schema for the IPv4 unicast + abstract forwarding table."; + + list ipv4-entry { + key "prefix"; + + description + "List of the IPv4 unicast entries within the abstract + forwarding table. This list is keyed by the destination IPv4 + prefix."; + + leaf prefix { + type leafref { + path "../config/prefix"; + } + description + "Reference to the IPv4 unicast destination prefix which + must be matched to utilise the AFT entry."; + } + + container config { + description + "Configuration parameters for the IPv4 unicast AFT entry."; + uses aft-ipv4-unicast-entry-config; + } + + container state { + config false; + description + "Operational state parameters for the IPv4 unicast AFT + entry."; + uses aft-ipv4-unicast-entry-config; + uses aft-ipv4-unicast-entry-state; + } + } + } + + grouping aft-ipv4-unicast-entry-config { + description + "Configuration parameters for the IPv4 unicast entry."; + + leaf prefix { + type oc-inet:ipv4-prefix; + description + "The IPv4 destination prefix that should be matched to + utilise the AFT entry."; + } + } + + grouping aft-ipv4-unicast-entry-state { + description + "Operational state parameters for the IPv4 unicast entry."; + uses aft-common-entry-state; + uses aft-common-ip-state; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-ipv6.yang b/src/plugins/yang/openconfig/openconfig-aft-ipv6.yang new file mode 100644 index 0000000..3a8f934 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-ipv6.yang @@ -0,0 +1,94 @@ +submodule openconfig-aft-ipv6 { + belongs-to "openconfig-aft" { + prefix "oc-aft"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-inet-types { prefix "oc-inet"; } + + // Include common cross-AFT groupings from the common submodule. + include openconfig-aft-common; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Submodule containing definitions of groupings for the abstract + forwarding tables for IPv6."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + grouping aft-ipv6-unicast-structural { + description + "Structural grouping defining the schema for the IPv6 unicast + abstract forwarding table."; + + list ipv6-entry { + key "prefix"; + + description + "List of the IPv6 unicast entries within the abstract + forwarding table. This list is keyed by the destination IPv6 + prefix."; + + leaf prefix { + type leafref { + path "../config/prefix"; + } + description + "Reference to the IPv6 unicast destination prefix which + must be matched to utilise the AFT entry."; + } + + container config { + description + "Configuration parameters for the IPv6 unicast AFT entry."; + uses aft-ipv6-unicast-entry-config; + } + + container state { + config false; + description + "Operational state parameters for the IPv6 unicast AFT + entry."; + uses aft-ipv6-unicast-entry-config; + uses aft-ipv6-unicast-entry-state; + } + } + } + + grouping aft-ipv6-unicast-entry-config { + description + "Configuration parameters for the IPv6 unicast entry."; + + leaf prefix { + type oc-inet:ipv6-prefix; + description + "The IPv6 destination prefix that should be matched to + utilise the AFT entry."; + } + } + + grouping aft-ipv6-unicast-entry-state { + description + "Operational state parameters for the IPv6 unicast entry."; + uses aft-common-entry-state; + uses aft-common-ip-state; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-mpls.yang b/src/plugins/yang/openconfig/openconfig-aft-mpls.yang new file mode 100644 index 0000000..1772fe0 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-mpls.yang @@ -0,0 +1,111 @@ +submodule openconfig-aft-mpls { + belongs-to "openconfig-aft" { + prefix "oc-aft"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-mpls-types { prefix "oc-mplst"; } + + // Include common cross-AFT groupings from the common submodule. + include openconfig-aft-common; + + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Submodule containing definitions of groupings for the abstract + forwarding table for MPLS label forwarding."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + grouping aft-mpls-structural { + description + "Structural grouping defining the schema for the MPLS + abstract forwarding table."; + + list label-entry { + key "label"; + + description + "List of the MPLS entries within the abstract + forwarding table. This list is keyed by the top-most MPLS + label."; + + leaf label { + type leafref { + path "../config/label"; + } + description + "Reference to the top-most MPLS label matched by the + entry."; + } + + container config { + description + "Configuration parameters for the MPLS AFT entry."; + uses aft-mpls-entry-config; + } + + container state { + config false; + description + "Operational state parameters for the MPLS AFT + entry."; + uses aft-mpls-entry-config; + uses aft-mpls-entry-state; + } + } + } + + grouping aft-mpls-entry-config { + description + "Configuration parameters for the MPLS entry."; + + leaf label { + type oc-mplst:mpls-label; + description + "The top-most MPLS label that should be matched to + utilise the AFT entry."; + } + } + + grouping aft-mpls-entry-state { + description + "Operational state parameters for the MPLS entry."; + uses aft-common-entry-state; + + leaf-list popped-mpls-label-stack { + type oc-mplst:mpls-label; + description + "The MPLS label stack to be popped from the packet when + switched by the system. The stack is encoded as a leaf-list + such that the first entry is the label that is outer-most (i.e., + furthest from the bottom of the stack). + + If the local system pops the outer-most label 400, then the + value of this list is [400,]. If the local system removes two + labels, the outer-most being 500, and the second of which is + 400, then the value of the list is [500, 400]. + + A swap operation is reflected by entries in the + popped-mpls-label-stack and pushed-mpls-label-stack nodes."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-network-instance.yang b/src/plugins/yang/openconfig/openconfig-aft-network-instance.yang new file mode 100644 index 0000000..aed74cf --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-network-instance.yang @@ -0,0 +1,98 @@ +module openconfig-aft-network-instance { + yang-version "1"; + + namespace "http://openconfig.net/yang/aft/ni"; + prefix "oc-aftni"; + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-network-instance { prefix "oc-ni"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module provides augmentations that are utilized + when building the OpenConfig network instance model to + add per-NI AFTs."; + + oc-ext:openconfig-version "0.2.2"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.2.2"; + } + + revision 2017-01-13 { + description + "Updated revision for external review"; + reference "0.2.1"; + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:afts/oc-ni:next-hops/oc-ni:next-hop/oc-ni:state" { + + description + "Add leaves that require referencing of a network instance to the + operational state parameters of a next-hop within the AFT for IPv4 + unicast."; + + uses aft-nexthop-ni-state; + } + + grouping aft-nexthop-ni-state { + description + "Operational state parameters relating to a next-hop which reference a + network instance."; + + leaf network-instance { + type oc-ni:network-instance-ref; + description + "The network-instance within which the next-hop should be resolved. + When this leaf is unspecified, the next-hop is resolved within + the local instance."; + } + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:afts/oc-ni:ipv4-unicast/oc-ni:ipv4-entry/oc-ni:state" { + description + "Add leaves that require referencing of a network instance to the + operational state parameters of an entry within the IPv4 unicast AFT."; + + uses aft-entry-ni-state; + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:afts/oc-ni:ipv6-unicast/oc-ni:ipv6-entry/oc-ni:state" { + description + "Add leaves that require referencing of a network instance to the + operational state parameters of an entry within the IPv6 unicast AFT."; + + uses aft-entry-ni-state; + } + + grouping aft-entry-ni-state { + description + "Operational state parameters relating to an AFT entry which reference + a network instance."; + + leaf origin-network-instance { + type oc-ni:network-instance-ref; + description + "If the AFT entry was imported from another network instance (e.g., it + corresponds to a L3 forwarding entry which was learned within another + network-instance), the value of this leaf reflects the network-instance + from which it was learned. + + For example, if the local network-instance corresponds to a L3VRF, and + routes are imported from the VPNv4 address-family of the BGP instance + in the DEFAULT_INSTANCE, then this value would reflect the + DEFAULT_INSTANCE as the origin-network-instance."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-pf.yang b/src/plugins/yang/openconfig/openconfig-aft-pf.yang new file mode 100644 index 0000000..839f9e5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-pf.yang @@ -0,0 +1,172 @@ +submodule openconfig-aft-pf { + belongs-to "openconfig-aft" { + prefix "oc-aft"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-inet-types { prefix "oc-inet"; } + import openconfig-yang-types { prefix "oc-yang"; } + import openconfig-mpls-types { prefix "oc-mplst"; } + import openconfig-packet-match-types { + prefix "oc-pkt-match-types"; + } + + // Include common cross-AFT groupings from the common submodule. + include openconfig-aft-common; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Submodule containing definitions of groupings for the abstract + forwarding table(s) for policy forwarding entries. These are + defined to be forwarding tables that allow matches on + fields other than the destination address that is used in + other forwarding tables."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + grouping aft-pf-structural { + description + "Structural grouping defining the schema for the policy + forwarding abstract forwarding table."; + + list policy-forwarding-entry { + key "index"; + + description + "List of the policy forwarding entries within the abstract + forwarding table. Each entry is uniquely identified by an + index on the system, due to the arbitrary match conditions + that may be implemented within the policy forwarding AFT. + The index may change upon changes of the entry if, and only + if, the device exporting the AFT replaces the entire entry + by removing the previous entry and replacing it with a + subsequent updated version."; + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the arbitary index for the policy forwarding + AFT entry."; + } + + container config { + description + "Configuration parameters for the Policy forwarding + AFT entry."; + uses aft-pf-entry-config; + } + + container state { + config false; + description + "Operational state parameters for the Policy Forwarding + AFT entry."; + uses aft-pf-entry-config; + uses aft-pf-entry-state; + } + } + } + + grouping aft-pf-entry-config { + description + "Configuration parameters for the Policy Forwarding + AFT entry."; + + leaf index { + type uint64; + description + "An arbitrary 64-bit index identifying the policy forwarding + AFT entry."; + } + + leaf ip-prefix { + type oc-inet:ip-prefix; + description + "The IP prefix that the forwarding entry matches."; + } + + leaf mac-address { + type oc-yang:mac-address; + description + "The MAC address that the forwarding entry matches. Used for + Layer 2 forwarding entries, e.g., within a VSI instance."; + } + + leaf mpls-label { + type oc-mplst:mpls-label; + description + "The MPLS label that the forwarding entry matches. Used for + MPLS forwarding entries, whereby the local device acts as an + LSR."; + } + + leaf mpls-tc { + type oc-mplst:mpls-tc; + description + "The value of the MPLS Traffic Class bits (formerly known as + the MPLS experimental bits) that are to be matched by the AFT + entry."; + reference + "RFC5462: Multiprotocol Label Switching (MPLS) Label Stack + Entry: 'EXP' Field Renamed to 'Traffic Class' Field"; } + + leaf ip-dscp { + type oc-inet:dscp; + description + "The value of the differentiated services code point (DSCP) to + be matched for the forwarding entry. The value is specified in + cases where specific class-based forwarding based on IP is + implemented by the device."; + } + + leaf ip-protocol { + type oc-pkt-match-types:ip-protocol-type; + description + "The value of the IP protocol field of an IPv4 packet, or the + next-header field of an IPv6 packet which is to be matched by + the AFT entry. This field is utilised where forwarding is + performed based on L4 information."; + } + + leaf l4-src-port { + type oc-inet:port-number; + description + "The value of the source port field of the transport header + that is to be matched by the AFT entry."; + } + + leaf l4-dst-port { + type oc-inet:port-number; + description + "The value of the destination port field of the transport + header that is to be matched by the AFT entry."; + } + } + + grouping aft-pf-entry-state { + description + "Operational state parameters for the Policy Forwarding + AFT entry."; + uses aft-common-entry-state; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft-types.yang b/src/plugins/yang/openconfig/openconfig-aft-types.yang new file mode 100644 index 0000000..7af2744 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft-types.yang @@ -0,0 +1,58 @@ +module openconfig-aft-types { + + namespace "http://openconfig.net/yang/fib-types"; + prefix "oc-aftt"; + + import openconfig-extensions { prefix "oc-ext"; } + + organization + "OpenConfig Working Group"; + + contact + "OpenConfig Working Group + www.openconfig.net"; + + description + "Types related to the OpenConfig Abstract Forwarding + Table (AFT) model"; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + typedef encapsulation-header-type { + type enumeration { + enum GRE { + description + "The encapsulation header is a Generic Routing Encapsulation + header."; + } + enum IPV4 { + description + "The encapsulation header is an IPv4 packet header"; + } + enum IPV6 { + description + "The encapsulation header is an IPv6 packet header"; + } + enum MPLS { + description + "The encapsulation header is one or more MPLS labels indicated + by the pushed and popped label stack lists."; + } + } + description + "Types of tunnel encapsulation that are supported by systems as either + head- or tail-end."; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-aft.yang b/src/plugins/yang/openconfig/openconfig-aft.yang new file mode 100644 index 0000000..ef3374d --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-aft.yang @@ -0,0 +1,144 @@ +module openconfig-aft { + + yang-version "1"; + + namespace "http://openconfig.net/yang/aft"; + + prefix "oc-aft"; + + import openconfig-extensions { prefix "oc-ext"; } + + // Include IPv4 AFT submodule. + include openconfig-aft-ipv4; + // Include IPv6 AFT submodule. + include openconfig-aft-ipv6; + // Include MPLS AFT submodule. + include openconfig-aft-mpls; + // Include policy forwarding AFT submodule. + include openconfig-aft-pf; + // Include the ethernet AFT submodule. + include openconfig-aft-ethernet; + // Include the common cross-AFT entities. + include openconfig-aft-common; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "A model describing the forwarding entries installed on a network + element. It should be noted that this model is not expected to + align 1:1 with the underlying structure used directly by a + forwarding element (e.g., linecard), but rather provide an + abstraction that can be consumed by an NMS to observe, and in some + cases manipulate, the internal forwarding database in a simplified + manner. Since the underlying model of the forwarding table is not + expected to align with this model, the structure described herein + is referred to as an Abstract Forwarding Table (AFT), rather than + the FIB."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Formatting fixes"; + reference "0.3.1"; + } + + revision 2017-05-10 { + description + "Refactor to provide concretised per-AF schemas per AFT."; + reference "0.3.0"; + } + + // config + state groupings + + // structural groupings + + grouping aft-top { + description + "Top-level grouping allowing per-protocol instantiation of the + AFT."; + + container afts { + description + "The abstract forwarding tables (AFTs) that are associated + with the network instance. An AFT is instantiated per-protocol + running within the network-instance - such that one exists for + IPv4 Unicast, IPv6 Unicast, MPLS, L2 forwarding entries, etc. + A forwarding entry within the FIB has a set of next-hops, + which may be a reference to an entry within another table - + e.g., where a Layer 3 next-hop has an associated Layer 2 + forwarding entry."; + + container ipv4-unicast { + description + "The abstract forwarding table for IPv4 unicast. Entries + within this table are uniquely keyed on the IPv4 unicast + destination prefix which is matched by ingress packets. + + The data set represented by the IPv4 Unicast AFT is the set + of entries from the IPv4 unicast RIB that have been selected + for installation into the FIB of the device exporting the + data structure."; + + uses aft-ipv4-unicast-structural; + } + + container ipv6-unicast { + description + "The abstract forwarding table for IPv6 unicast. Entries + within this table are uniquely keyed on the IPv6 unicast + destination prefix which is matched by ingress packets. + + The data set represented by the IPv6 Unicast AFTis the set + of entries within the IPv6 RIB that "; + + uses aft-ipv6-unicast-structural; + + } + + container policy-forwarding { + description + "The abstract forwarding table for policy-based forwarding + entries. Since multiple match criteria can be utilised + within a policy-based forwarding rule, this AFT provides a + flexible match criteria, and is indexed based on an + arbitrary 64-bit index. Entries within the AFT may match on + multiple field types (e.g., L4 header fields, as well as L2 + fields). + + Examples of entries within this table are: + - IPv4 policy-based routing based on DSCP. + - MPLS policy-based forwarding entries."; + + uses aft-pf-structural; + } + + container mpls { + description + "The abstract forwarding table for MPLS label based + forwarding entries. Entries within the table are keyed based + on the top-most MPLS label in the stack on the ingress + packet."; + + uses aft-mpls-structural; + } + + container ethernet { + description + "The abstract forwarding table for Ethernet based forwarding + entries. Entries within the table are keyed based on the + destination MAC address on the ingress packet."; + + uses aft-ethernet-structural; + } + + uses aft-next-hop-groups-structural; + uses aft-nhop-structural; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-alarm-types.yang b/src/plugins/yang/openconfig/openconfig-alarm-types.yang new file mode 100644 index 0000000..7ec8665 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-alarm-types.yang @@ -0,0 +1,139 @@ +module openconfig-alarm-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/alarms/types"; + + prefix "oc-alarm-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines operational state data related to alarms + that the device is reporting. + + This model reuses some data items defined in the draft IETF + YANG Alarm Module: + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02 + + Portions of this code were derived from the draft IETF YANG Alarm + Module. Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2018-01-16" { + description + "Moved alarm identities into separate types module"; + reference "0.2.0"; + } + + // identity statements + identity OPENCONFIG_ALARM_TYPE_ID { + description + "Base identity for alarm type ID profiles"; + } + + identity AIS { + base OPENCONFIG_ALARM_TYPE_ID; + description + "Defines an alarm indication signal type of alarm"; + } + + identity EQPT { + base OPENCONFIG_ALARM_TYPE_ID; + description + "Defines an equipment related type of alarm that is specific + to the physical hardware"; + } + + identity LOS { + base OPENCONFIG_ALARM_TYPE_ID; + description + "Defines a loss of signal type of alarm"; + } + + identity OTS { + base OPENCONFIG_ALARM_TYPE_ID; + description + "Defines a optical transport signal type of alarm"; + } + + identity OPENCONFIG_ALARM_SEVERITY { + description + "Base identity for alarm severity profiles. Derived + identities are based on contents of the draft + IETF YANG Alarm Module"; + reference + "IETF YANG Alarm Module: Draft - typedef severity + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02"; + + } + + identity UNKNOWN { + base OPENCONFIG_ALARM_SEVERITY; + description + "Indicates that the severity level could not be determined. + This level SHOULD be avoided."; + } + + identity MINOR { + base OPENCONFIG_ALARM_SEVERITY; + description + "Indicates the existence of a non-service affecting fault + condition and that corrective action should be taken in + order to prevent a more serious (for example, service + affecting) fault. Such a severity can be reported, for + example, when the detected alarm condition is not currently + degrading the capacity of the resource"; + } + + identity WARNING { + base OPENCONFIG_ALARM_SEVERITY; + description + "Indicates the detection of a potential or impending service + affecting fault, before any significant effects have been felt. + Action should be taken to further diagnose (if necessary) and + correct the problem in order to prevent it from becoming a more + serious service affecting fault."; + } + + identity MAJOR { + base OPENCONFIG_ALARM_SEVERITY; + description + "Indicates that a service affecting condition has developed + and an urgent corrective action is required. Such a severity + can be reported, for example, when there is a severe + degradation in the capability of the resource and its full + capability must be restored."; + } + + identity CRITICAL { + base OPENCONFIG_ALARM_SEVERITY; + description + "Indicates that a service affecting condition has occurred + and an immediate corrective action is required. Such a + severity can be reported, for example, when a resource becomes + totally out of service and its capability must be restored."; + } + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-alarms.yang b/src/plugins/yang/openconfig/openconfig-alarms.yang new file mode 100644 index 0000000..f1ca587 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-alarms.yang @@ -0,0 +1,221 @@ +module openconfig-alarms { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/alarms"; + + prefix "oc-alarms"; + + // import some basic types + import openconfig-alarm-types { prefix oc-alarm-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + import openconfig-platform { prefix oc-platform; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines operational state data related to alarms + that the device is reporting. + + This model reuses some data items defined in the draft IETF + YANG Alarm Module: + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02 + + Portions of this code were derived from the draft IETF YANG Alarm + Module. Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2018-01-16" { + description + "Moved alarm identities into separate types module"; + reference "0.3.0"; + } + + revision "2018-01-10" { + description + "Make alarms list read only"; + reference "0.2.0"; + } + + revision "2017-08-24" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // grouping statements + + grouping alarm-state { + description + "Operational state data for device alarms"; + + leaf id { + type string; + description + "Unique ID for the alarm -- this will not be a + configurable parameter on many implementations"; + } + + leaf resource { + type string; + description + "The item that is under alarm within the device. The + resource may be a reference to an item which is + defined elsewhere in the model. For example, it + may be a platform/component, interfaces/interface, + terminal-device/logical-channels/channel, etc. In this + case the system should match the name of the referenced + item exactly. The referenced item could alternatively be + the path of the item within the model."; + reference + "IETF YANG Alarm Module: Draft - typedef resource + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02"; + } + + leaf text { + type string; + description + "The string used to inform operators about the alarm. This + MUST contain enough information for an operator to be able + to understand the problem. If this string contains structure, + this format should be clearly documented for programs to be + able to parse that information"; + reference + "IETF YANG Alarm Module: Draft - typedef alarm-text + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02"; + } + + leaf time-created { + type oc-types:timeticks64; + description + "The time at which the alarm was raised by the system. + This value is expressed as nanoseconds since the Unix Epoch"; + } + + leaf severity { + type identityref { + base oc-alarm-types:OPENCONFIG_ALARM_SEVERITY; + } + description + "The severity level indicating the criticality and impact + of the alarm"; + reference + "IETF YANG Alarm Module: Draft - typedef severity + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02"; + } + + leaf type-id { + type union { + type string; + type identityref { + base oc-alarm-types:OPENCONFIG_ALARM_TYPE_ID; + } + } + description + "The abbreviated name of the alarm, for example LOS, + EQPT, or OTS. Also referred to in different systems as + condition type, alarm identifier, or alarm mnemonic. It + is recommended to use the OPENCONFIG_ALARM_TYPE_ID + identities where possible and only use the string type + when the desired identityref is not yet defined"; + reference + "IETF YANG Alarm Module: Draft - typedef alarm-type-id + https://tools.ietf.org/html/draft-vallin-netmod-alarm-module-02"; + } + } + + grouping alarm-config { + description + "Configuration data for device alarms"; + } + + grouping alarms-top { + description + "Top-level grouping for device alarms"; + + container alarms { + description + "Top-level container for device alarms"; + + config false; + + list alarm { + key "id"; + description + "List of alarms, keyed by a unique id"; + + leaf id { + type leafref { + path "../state/id"; + } + + description + "References the unique alarm id"; + } + + container config { + description + "Configuration data for each alarm"; + + uses alarm-config; + } + + container state { + config false; + + description + "Operational state data for a device alarm"; + + uses alarm-config; + uses alarm-state; + } + } + } + } + + + // augments + + augment "/oc-platform:components/oc-platform:component/oc-platform:state" { + description + "Adds specific alarms related to a component."; + + leaf equipment-failure { + type boolean; + default "false"; + description + "If true, the hardware indicates that the component's physical equipment + has failed"; + } + + leaf equipment-mismatch { + type boolean; + default "false"; + description + "If true, the hardware indicates that the component inserted into the + affected component's physical location is of a different type than what + is configured"; + } + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-ap-manager.yang b/src/plugins/yang/openconfig/openconfig-ap-manager.yang new file mode 100644 index 0000000..6fb3f8f --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ap-manager.yang @@ -0,0 +1,220 @@ +module openconfig-ap-manager { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/wifi/ap-manager"; + + // Assign this module a prefix to be used by other modules, when imported. + prefix "ap-manager"; + + // Imports + import openconfig-extensions { prefix oc-ext; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-wifi-types { prefix oc-wifi; } + + // Meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines the top level configuration and state data for a + system which manages Access Points."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-02-14" { + description + "Initial version"; + reference "0.1.0"; + } + + grouping provision-aps-config { + description + "Assignment of hostname to an Access Point."; + + leaf mac { + type oc-yang:mac-address; + description + "MAC address of the AP primary Ethernet interface. If AP + has multiple Ethernet interfaces, this would be the MAC printed + on the unit label and referenced within the management system. + Vendors MUST reject attempts to configure this leaf."; + } + + leaf hostname { + type oc-inet:domain-name; + description + "Hostname of the Access Point."; + } + + leaf country-code { + type string { + pattern '[A-Z]{2}'; + } + description + "Country code where the AP operates in ISO 3166-1 alpha-2 + format."; + } + } + + grouping controller-aps-system-state { + description + "Grouping for a Controller & AP system state data."; + + leaf mac { + type oc-yang:mac-address; + description + "MAC address of the AP primary Ethernet interface. If AP + has multiple Ethernet interfaces, this would be the MAC printed + on the unit label and referenced within the management system. + Vendors MUST reject attempts to configure this leaf."; + } + + leaf hostname { + type oc-inet:domain-name; + description + "Hostname of the Access Point."; + } + + leaf opstate { + type identityref { + base oc-wifi:AP_STATE; + } + description + "The current operational state of the AP."; + } + + leaf uptime { + type uint32; + units seconds; + description + "Seconds this AP has been in the op-state of 'UP'."; + } + + leaf enabled { + type boolean; + description + "Wheather the AP is enabled or disabled."; + } + + leaf serial { + type string; + description + "Serial number of the Access Point."; + } + + leaf model { + type string; + description + "Model number of the Access Point."; + } + + leaf ipv4 { + type oc-inet:ipv4-address; + description + "The IPv4 address of the Access Point."; + } + + leaf ipv6 { + type oc-inet:ipv6-address; + description + "The IPv6 address of the Access Point."; + } + + leaf power-source { + type enumeration { + enum AT { + description "Powered using 802.3at."; + } + enum AF { + description "Powered using 802.3af."; + } + enum PLUG { + description "Powered using local source, not PoE."; + } + } + description + "Enumerate how the AP is being powered."; + } + } + + grouping provision-ap-top { + description + "Top-level grouping for assigning hostnames to APs."; + + container provision-aps { + description + "Top most container for assigning hostnames to APs."; + + list provision-ap { + key "mac"; + description + "List of MAC addresses that will have hostnames assigned."; + + leaf mac { + type leafref { + path "../config/mac"; + } + description + "Reference to the MAC address list key. This leaf is a reference + only and not to be configured."; + } + + container config { + description + "Config container for assigning hostnames to APs."; + + uses provision-aps-config; + } + + container state { + config false; + description + "State container for assigning hostnames to APs."; + + uses provision-aps-config; + } + } + } + } + + grouping joined-aps-top { + description + "Top-level grouping for APs assigned to controller(s)."; + + container joined-aps { + description + "Top most container for joined-aps."; + + list joined-ap { + key "hostname"; + config false; + description + "List of access points that have joined the controller."; + + leaf hostname { + type leafref { + path "../state/hostname"; + } + description + "Reference to the MAC address list key."; + } + + container state { + config false; + description + "State container for Joined APs."; + + uses controller-aps-system-state; + } + } + } + } + uses provision-ap-top; + uses joined-aps-top; +} diff --git a/src/plugins/yang/openconfig/openconfig-bfd.yang b/src/plugins/yang/openconfig/openconfig-bfd.yang new file mode 100644 index 0000000..fc573e5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bfd.yang @@ -0,0 +1,738 @@ +module openconfig-bfd { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/bfd"; + + prefix "oc-bfd"; + + // import some basic types + import openconfig-extensions { prefix "ocext"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-interfaces { prefix "oc-if"; } + import openconfig-inet-types { prefix "oc-inet"; } + import openconfig-if-types { prefix "oc-ift"; } + import openconfig-network-instance { prefix "oc-ni"; } + import openconfig-policy-types { prefix "oc-pol-types"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "An OpenConfig model of Bi-Directional Forwarding Detection (BFD) + configuration and operational state."; + + ocext:openconfig-version "0.1.0"; + + revision "2017-11-17" { + description + "Update version number for initial sharing."; + reference "0.1.0"; + } + + revision "2017-10-19" { + description + "Adopt OpenConfig types models, type corrections"; + reference "0.0.2"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + typedef bfd-session-state { + type enumeration { + enum UP { + description + "The BFD session is perceived to be up by the system."; + } + enum DOWN { + description + "The BFD session is perceived to be down by the system."; + } + enum ADMIN_DOWN { + description + "The BFD session is administratively disabled."; + } + enum INIT { + description + "The BFD session is perceived to be initialising by the + system."; + } + } + description + "The state of the BFD session according to the system referred + to by the context of the leaf."; + reference + "RFC5880 - Bidirectional Forwarding Detection, Section + 4.1"; + } + + typedef bfd-diagnostic-code { + type enumeration { + enum NO_DIAGNOSTIC { + value 0; + description + "No diagnostic code was specified, or the session has not + changed state."; + } + enum DETECTION_TIMEOUT { + value 1; + description + "The control detection time expired: no BFD packet was + received within the required period."; + } + enum ECHO_FAILED { + value 2; + description + "The BFD echo function failed - echo packets have not been + received for the required period of time."; + } + enum FORWARDING_RESET { + value 3; + description + "The forwarding plane in the local system was reset - such + that the remote system cannot rely on the forwarding state of + the device specifying this error code."; + } + enum PATH_DOWN { + value 4; + description + "Signalling outside of BFD specified that the path underlying + this session has failed."; + } + enum CONCATENATED_PATH_DOWN { + value 5; + description + "When a BFD session runs over a series of path segments, this + error code indicates that a subsequent path segment (i.e., + one in the transmit path between the source and destination + of the session) has failed."; + } + enum ADMIN_DOWN { + value 6; + description + "The BFD session has been administratively disabled by the + peer."; + } + enum REVERSE_CONCATENATED_PATH_DOWN { + value 7; + description + "In the case that a BFD session is running over a series of + path segments, this error code indicates that a path segment + on the reverse path (i.e., in the transmit direction from the + destination to the source of the session) has failed."; + } + } + description + "Diagnostic codes defined by BFD. These typically indicate the + reason for a change of session state."; + reference + "RFC5880 - Bidirectional Forwarding Detection, Section + 4.1"; + } + + + grouping bfd-interface-config { + description + "Top-level per-interface configuration parameters for BFD."; + + leaf id { + type string; + description + "A unique identifier for the interface."; + } + + leaf enabled { + type boolean; + description + "When this leaf is set to true then the BFD session is enabled + on the specified interface - if it is set to false, it is + administratively disabled."; + } + + leaf local-address { + type oc-inet:ip-address; + description + "The source IP address to be used for BFD sessions over this + interface."; + } + + leaf desired-minimum-tx-interval { + type uint32; + units microseconds; + description + "The minimum interval between transmission of BFD control + packets that the operator desires. This value is advertised to + the peer, however the actual interval used is specified by + taking the maximum of desired-minimum-tx-interval and the + value of the remote required-minimum-receive interval value. + + This value is specified as an integer number of microseconds."; + } + + leaf required-minimum-receive { + type uint32; + units microseconds; + description + "The minimum interval between received BFD control packets that + this system should support. This value is advertised to the + remote peer to indicate the maximum frequency (i.e., minimum + inter-packet interval) between BFD control packets that is + acceptable to the local system."; + } + + // rjs: Could have required-minimum-echo-receive here, but this is + // generally not configurable. + + leaf detection-multiplier { + type uint16 { + range "1..max"; + } + description + "The number of packets that must be missed to declare this + session as down. The detection interval for the BFD session + is calculated by multiplying the value of the negotiated + transmission interval by this value."; + } + + leaf enable-per-member-link { + type boolean; + default false; + description + "When this leaf is set to true - BFD will be enabled on + each member interface of the aggregated Ethernet bundle."; + + when "/oc-if:interfaces/oc-if:interface" + + "[name=current()/../../interface-ref/config/interface]/" + + "oc-if:state/oc-if:type = 'oc-ift:IF_AGGREGATE'" { + description + "Include per-member link BFD only when the type of + interface is a link aggregate."; + } + } + } + + grouping bfd-interface-state { + // placeholder + description + "Operational state parameters relating to BFD running on an + interface."; + } + + grouping bfd-session-state-mode-timers-common { + description + "Common operational state parameters that are re-used across + both asynchronous and echo modes of BFD."; + + leaf last-packet-transmitted { + type uint64; + description + "The date and time at which the last BFD packet + was transmitted for this session, expressed as the number + of nanoseconds since the Unix Epoch (January 1, 1970, + 00:00 UTC)."; + } + + leaf last-packet-received { + type uint64; + description + "The date and time at which the last BFD packet + was received for this session, expressed as the number + of nanoseconds since the Unix Epoch (January 1, 1970, + 00:00 UTC)."; + } + + leaf transmitted-packets { + // TODO: looks to be unsupported on JUNOS + type uint64; + description + "The number of packets that have been transmitted + by the local system."; + } + + leaf received-packets { + // TODO: looks to be unsupported on JUNOS + type uint64; + description + "The number of packets that have been received by the + local system from the remote neighbour."; + } + + leaf up-transitions { + // TODO: looks to only be supported in SROS + type uint64; + description + "The number of times that the adjacency with the neighbor + has transitioned into the up state."; + } + } + + grouping bfd-session-state-sessiondetails-common { + description + "Common session details for a BFD session."; + + leaf session-state { + type bfd-session-state; + description + "The state of the BFD session perceived by the local system."; + + } + + leaf remote-session-state { + type bfd-session-state; + description + "The reported state of the BFD session according to the remote + system. This state reflects the last state reported in a BFD + control packet."; + } + + leaf last-failure-time { + type oc-types:timeticks64; + description + "The time of the last transition of the BFD session out of + the UP state, expressed as the number of nanoseconds since + the Unix epoch."; + } + + leaf failure-transitions { + type uint64; + description + "The number of times that the BFD session has transitioned + out of the UP state."; + } + + leaf local-discriminator { + type string; + description + "A unique identifier used by the local system to identify this + BFD session."; + } + + leaf remote-discriminator { + type string; + description + "A unique identified used by the remote system to identify this + BFD session."; + } + + leaf local-diagnostic-code { + type bfd-diagnostic-code; + description + "The local BFD diagnostic code indicating the most recent + reason for failure of this BFD session."; + } + + leaf remote-diagnostic-code { + type bfd-diagnostic-code; + description + "The remote BFD diagnostic code indicating the remote system's + reason for failure of the BFD session"; + } + + leaf remote-minimum-receive-interval { + type uint32; + description + "The value of the minimum receive interval that was specified + in the most recent BFD control packet received from the peer."; + } + + leaf demand-mode-requested { + type boolean; + description + "This leaf is set to true when the remote system has requested + demand mode be run for this session."; + } + + leaf remote-authentication-enabled { + type boolean; + description + "This leaf is set to true when the remote system has specified + that authentication is present for the BFD session."; + } + + leaf remote-control-plane-independent { + type boolean; + description + "This leaf is set to true when the remote system has specified + that the hardware implementing this BFD session is independent + of the control plane's liveliness."; + } + } + + + grouping bfd-session-state-async-common { + description + "Common parameters for asynchronous BFD sessions"; + + container async { + description + "Operational state parameters specifically relating to + asynchronous mode of BFD."; + + uses bfd-session-state-mode-timers-common; + } + } + + grouping bfd-session-state-echo-common { + description + "Common parameters for echo-mode BFD sessions."; + + container echo { + description + "Operational state parameters specifically relating to the + echo mode of BFD."; + + leaf active { + type boolean; + description + "This leaf is set to true when echo mode is running between + the local and remote system. When it is set to false, solely + asynchronous mode is active."; + } + + uses bfd-session-state-mode-timers-common; + } + } + + + grouping bfd-session-state-common { + description + "Common operational state parameters that may be re-used across + multiple BFD session contexts."; + + leaf local-address { + type oc-inet:ip-address; + description + "The IP address used by the local system for this BFD session."; + } + + leaf remote-address { + type oc-inet:ip-address; + description + "The IP address used by the remote system for this BFD session."; + } + + leaf-list subscribed-protocols { + type identityref { + base "oc-pol-types:INSTALL_PROTOCOL_TYPE"; + } + description + "Indicates the set of protocols that currently use + this BFD session for liveliness detection."; + } + + uses bfd-session-state-sessiondetails-common; + uses bfd-session-state-echo-common; + uses bfd-session-state-async-common; + } + + grouping bfd-session-microbfd-common { + description + "BFD session parameters utilised only for micro-BFD sessions."; + + uses bfd-session-state-sessiondetails-common; + uses bfd-session-state-async-common; + } + + grouping bfd-interface-peer-state { + description + "Per-peer, per-interface operational state parameters for BFD."; + + uses bfd-session-state-common; + } + + grouping bfd-interface-microbfd-config { + description + "Configuration parameters for a microBFD session on an + interface."; + + leaf local-address { + type oc-inet:ip-address; + description + "The local IP address used by the system for the micro-BFD session + specified."; + } + + leaf remote-address { + type oc-inet:ip-address; + description + "The remote IP destination that should be used by the system for + the micro-BFD session specified."; + } + + leaf member-interface { + type leafref { + path "/oc-if:interfaces/" + + "oc-if:interface/oc-if:config/oc-if:name"; + } + // rjs: Note that this does not restrict to only interfaces that + // are part of the current LAG. An implementation should return + // NOK if such an interface is specified. + description + "Reference to a member link of the aggregate interface being + described."; + } + } + + grouping bfd-interface-microbfd-state { + description + "Operational state parameters relating to a micro-BFD session on + an interface."; + + uses bfd-session-microbfd-common; + } + + grouping bfd-interface-microbfd-structural { + description + "Structural grouping for micro-bfd configuration and state + parameters."; + + container micro-bfd-sessions { + description + "Parameters relating to micro-BFD sessions associated + with the interface."; + + list micro-bfd-session { + description + "This list contains configuration and state parameters + relating to micro-BFD session."; + reference + "RFC7130 - Bidirectional Forwarding Detection (BFD) + on Link Aggregation Group (LAG) Interfaces."; + + key "member-interface"; + + leaf member-interface { + type leafref { + path "../config/member-interface"; + } + description + "A reference to the member interface of the link + aggregate."; + } + + container config { + description + "Configuration parameters for the micro-BFD session."; + uses bfd-interface-microbfd-config; + } + + container state { + config false; + description + "Operational state parameters for the micro-BFD session."; + uses bfd-interface-microbfd-config; + uses bfd-interface-microbfd-state; + } + } + when "/oc-if:interfaces/oc-if:interface" + + "[name=current()/../interface-ref/config/interface]/" + + "oc-if:state/oc-if:type = 'oc-ift:IF_AGGREGATE'" { + description + "Include per-member link BFD only when the type of + interface is a link aggregate."; + } + } + } + + grouping bfd-interface-peer-structural { + description + "Structural grouping for BFD peers (in the context of an interface)."; + + container peers { + description + "Parameters relating to the BFD peers which are seen + over this interface."; + + list peer { + key "local-discriminator"; + config false; + + description + "Parameters relating to the BFD peer specified by the + remote address."; + + leaf local-discriminator { + type leafref { + path "../state/local-discriminator"; + } + description + "The local discriminator, which is unique for the + session on the system."; + } + + container state { + config false; + description + "Operational state parameters for the BFD session."; + + uses bfd-interface-peer-state; + } + } + } + } + + grouping bfd-top { + description + "Structural grouping for Bidirectional Forwarding Detection (BFD)."; + + container bfd { + description + "Configuration and operational state parameters for BFD."; + reference "RFC5880, RFC5881"; + + container interfaces { + description + "Interfaces on which BFD sessions are to be enabled."; + + list interface { + key "id"; + + description + "Per-interface configuration and state parameters for BFD."; + + leaf id { + type leafref { + path "../config/id"; + } + description + "A reference to an identifier for the interface on which + BFD is enabled."; + } + + container config { + description + "Configuration parameters for BFD on the specified + interface."; + uses bfd-interface-config; + } + + container state { + config false; + description + "Operational state parameters for BFD on the specified + interface."; + uses bfd-interface-config; + uses bfd-interface-state; + } + + uses oc-if:interface-ref; + + uses bfd-interface-microbfd-structural; + uses bfd-interface-peer-structural; + } + } + } + } + + grouping enable-bfd-config { + description + "Configuration parameters relating to enabling BFD."; + + leaf enabled { + type boolean; + description + "When this leaf is set to true, BFD is used to detect the + liveliness of the remote peer or next-hop."; + } + } + + grouping enable-bfd-state { + description + "Operational state parameters relating to enabling BFD."; + + leaf associated-session { + // TODO: this is a leafref to something unique, but seems + // like it might be expensive for the NMS to find out since + // it will need to cycle through all interfaces looking for + // the associated local-discriminator. + type leafref { + path "/bfd/interfaces/interface/peers/peer/local-discriminator"; + } + description + "A reference to the BFD session that is tracking the liveliness + of the remote entity."; + } + + // + // A fix to the above is to have the following leaf to show which + // interface is associated. + // + // leaf associated-interface { + // type leafref { + // path "/bfd/interfaces/interface/config/id"; + // } + // } + } + + grouping bfd-enable { + description + "Grouping which can be included in a protocol wishing to enable + BFD."; + + container enable-bfd { + description + "Enable BFD for liveliness detection to the next-hop or + neighbour."; + + container config { + description + "Configuration parameters relating to enabling BFD."; + + uses enable-bfd-config; + } + + container state { + config false; + description + "Operational state parameters relating to enabing BFD."; + + uses enable-bfd-config; + uses enable-bfd-state; + } + } + } + + // rjs - TODO - should these be specified within each model? The + // answer here is probably yes, since otherwise openconfig + // network-instance ends up with a circular reference. + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:protocols/oc-ni:protocol/oc-ni:bgp/" + + "oc-ni:neighbors/oc-ni:neighbor" { + description + "Augment the BGP routing protocol to add a link to BFD for + neighbour detection."; + + uses bfd-enable; + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:protocols/oc-ni:protocol/oc-ni:bgp/" + + "oc-ni:peer-groups/oc-ni:peer-group" { + description + "Augment the BGP routing protocol to add a link to BFD for + neighbor detection when specified within a peer-group."; + + uses bfd-enable; + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:protocols/oc-ni:protocol/oc-ni:static-routes/" + + "oc-ni:static/oc-ni:next-hops/oc-ni:next-hop" { + description + "Augment the static route configuration to allow a next-hop + to be tracked by BFD."; + + uses bfd-enable; + } + + uses bfd-top; +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-common-multiprotocol.yang b/src/plugins/yang/openconfig/openconfig-bgp-common-multiprotocol.yang new file mode 100644 index 0000000..6149a7c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-common-multiprotocol.yang @@ -0,0 +1,518 @@ +submodule openconfig-bgp-common-multiprotocol { + + belongs-to openconfig-bgp { + prefix "oc-bgp"; + } + + import openconfig-extensions { prefix oc-ext; } + import openconfig-bgp-types { prefix oc-bgp-types; } + import openconfig-routing-policy { prefix oc-rpol; } + import openconfig-types { prefix oc-types; } + + include openconfig-bgp-common; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This sub-module contains groupings that are related to support + for multiple protocols in BGP. The groupings are common across + multiple contexts."; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + grouping bgp-common-mp-afi-safi-graceful-restart-config { + description + "BGP graceful restart parameters that apply on a per-AFI-SAFI + basis"; + + leaf enabled { + type boolean; + default false; + description + "This leaf indicates whether graceful-restart is enabled for + this AFI-SAFI"; + } + } + + grouping bgp-common-mp-afi-safi-config { + description + "Configuration parameters used for all BGP AFI-SAFIs"; + + leaf afi-safi-name { + type identityref { + base oc-bgp-types:AFI_SAFI_TYPE; + } + description "AFI,SAFI"; + } + + leaf enabled { + type boolean; + default false; + description + "This leaf indicates whether the AFI-SAFI is + enabled for the neighbour or group"; + } + } + + grouping bgp-common-mp-all-afi-safi-list-contents { + description + "A common grouping used for contents of the list that is used + for AFI-SAFI entries"; + + // import and export policy included for the afi/safi + uses oc-rpol:apply-policy-group; + + uses bgp-common-mp-ipv4-unicast-group; + uses bgp-common-mp-ipv6-unicast-group; + uses bgp-common-mp-ipv4-labeled-unicast-group; + uses bgp-common-mp-ipv6-labeled-unicast-group; + uses bgp-common-mp-l3vpn-ipv4-unicast-group; + uses bgp-common-mp-l3vpn-ipv6-unicast-group; + uses bgp-common-mp-l3vpn-ipv4-multicast-group; + uses bgp-common-mp-l3vpn-ipv6-multicast-group; + uses bgp-common-mp-l2vpn-vpls-group; + uses bgp-common-mp-l2vpn-evpn-group; + uses bgp-common-mp-srte-policy-ipv4-group; + uses bgp-common-mp-srte-policy-ipv6-group; + } + + // Groupings relating to each address family + grouping bgp-common-mp-ipv4-unicast-group { + description + "Group for IPv4 Unicast configuration options"; + + container ipv4-unicast { + when "../afi-safi-name = 'oc-bgp-types:IPV4_UNICAST'" { + description + "Include this container for IPv4 Unicast specific + configuration"; + } + + description "IPv4 unicast configuration options"; + + // include common IPv[46] unicast options + uses bgp-common-mp-ipv4-ipv6-unicast-common; + + // placeholder for IPv4 unicast specific configuration + } + } + + grouping bgp-common-mp-ipv6-unicast-group { + description + "Group for IPv6 Unicast configuration options"; + + container ipv6-unicast { + when "../afi-safi-name = 'oc-bgp-types:IPV6_UNICAST'" { + description + "Include this container for IPv6 Unicast specific + configuration"; + } + + description "IPv6 unicast configuration options"; + + // include common IPv[46] unicast options + uses bgp-common-mp-ipv4-ipv6-unicast-common; + + // placeholder for IPv6 unicast specific configuration + // options + } + } + + grouping bgp-common-mp-ipv4-labeled-unicast-group { + description + "Group for IPv4 Labeled Unicast configuration options"; + + container ipv4-labeled-unicast { + when "../afi-safi-name = 'oc-bgp-types:IPV4_LABELED_UNICAST'" { + description + "Include this container for IPv4 Labeled Unicast specific + configuration"; + } + + description "IPv4 Labeled Unicast configuration options"; + + uses bgp-common-mp-all-afi-safi-common; + + // placeholder for IPv4 Labeled Unicast specific config + // options + } + } + + grouping bgp-common-mp-ipv6-labeled-unicast-group { + description + "Group for IPv6 Labeled Unicast configuration options"; + + container ipv6-labeled-unicast { + when "../afi-safi-name = 'oc-bgp-types:IPV6_LABELED_UNICAST'" { + description + "Include this container for IPv6 Labeled Unicast specific + configuration"; + } + + description "IPv6 Labeled Unicast configuration options"; + + uses bgp-common-mp-all-afi-safi-common; + + // placeholder for IPv6 Labeled Unicast specific config + // options. + } + } + + grouping bgp-common-mp-l3vpn-ipv4-unicast-group { + description + "Group for IPv4 Unicast L3VPN configuration options"; + + container l3vpn-ipv4-unicast { + when "../afi-safi-name = 'oc-bgp-types:L3VPN_IPV4_UNICAST'" { + description + "Include this container for IPv4 Unicast L3VPN specific + configuration"; + } + + description "Unicast IPv4 L3VPN configuration options"; + + // include common L3VPN configuration options + uses bgp-common-mp-l3vpn-ipv4-ipv6-unicast-common; + + // placeholder for IPv4 Unicast L3VPN specific config options. + } + } + + grouping bgp-common-mp-l3vpn-ipv6-unicast-group { + description + "Group for IPv6 Unicast L3VPN configuration options"; + + container l3vpn-ipv6-unicast { + when "../afi-safi-name = 'oc-bgp-types:L3VPN_IPV6_UNICAST'" { + description + "Include this container for unicast IPv6 L3VPN specific + configuration"; + } + + description "Unicast IPv6 L3VPN configuration options"; + + // include common L3VPN configuration options + uses bgp-common-mp-l3vpn-ipv4-ipv6-unicast-common; + + // placeholder for IPv6 Unicast L3VPN specific configuration + // options + } + } + + grouping bgp-common-mp-l3vpn-ipv4-multicast-group { + description + "Group for IPv4 L3VPN multicast configuration options"; + + container l3vpn-ipv4-multicast { + when "../afi-safi-name = 'oc-bgp-types:L3VPN_IPV4_MULTICAST'" { + description + "Include this container for multicast IPv6 L3VPN specific + configuration"; + } + + description "Multicast IPv4 L3VPN configuration options"; + + // include common L3VPN multicast options + uses bgp-common-mp-l3vpn-ipv4-ipv6-multicast-common; + + // placeholder for IPv4 Multicast L3VPN specific configuration + // options + } + } + + grouping bgp-common-mp-l3vpn-ipv6-multicast-group { + description + "Group for IPv6 L3VPN multicast configuration options"; + + container l3vpn-ipv6-multicast { + when "../afi-safi-name = 'oc-bgp-types:L3VPN_IPV6_MULTICAST'" { + description + "Include this container for multicast IPv6 L3VPN specific + configuration"; + } + + description "Multicast IPv6 L3VPN configuration options"; + + // include common L3VPN multicast options + uses bgp-common-mp-l3vpn-ipv4-ipv6-multicast-common; + + // placeholder for IPv6 Multicast L3VPN specific configuration + // options + } + } + + grouping bgp-common-mp-l2vpn-vpls-group { + description + "Group for BGP-signalled VPLS configuration options"; + + container l2vpn-vpls { + when "../afi-safi-name = 'oc-bgp-types:L2VPN_VPLS'" { + description + "Include this container for BGP-signalled VPLS specific + configuration"; + } + + description "BGP-signalled VPLS configuration options"; + + // include common L2VPN options + uses bgp-common-mp-l2vpn-common; + + // placeholder for BGP-signalled VPLS specific configuration + // options + } + } + + grouping bgp-common-mp-l2vpn-evpn-group { + description + "Group for BGP EVPN configuration options"; + + container l2vpn-evpn { + when "../afi-safi-name = 'oc-bgp-types:L2VPN_EVPN'" { + description + "Include this container for BGP EVPN specific + configuration"; + } + + description "BGP EVPN configuration options"; + + // include common L2VPN options + uses bgp-common-mp-l2vpn-common; + + // placeholder for BGP EVPN specific configuration options + } + } + + // Common groupings across multiple AFI,SAFIs + grouping bgp-common-mp-all-afi-safi-common { + description + "Grouping for configuration common to all AFI,SAFI"; + + container prefix-limit { + description + "Configure the maximum number of prefixes that will be + accepted from a peer"; + + container config { + description + "Configuration parameters relating to the prefix + limit for the AFI-SAFI"; + uses bgp-common-mp-all-afi-safi-common-prefix-limit-config; + } + + container state { + config false; + description + "State information relating to the prefix-limit for the + AFI-SAFI"; + uses bgp-common-mp-all-afi-safi-common-prefix-limit-config; + } + } + } + + grouping bgp-common-mp-ipv4-ipv6-unicast-common { + description + "Common configuration that is applicable for IPv4 and IPv6 + unicast"; + + // include common afi-safi options. + uses bgp-common-mp-all-afi-safi-common; + + // configuration options that are specific to IPv[46] unicast + container config { + description + "Configuration parameters for common IPv4 and IPv6 unicast + AFI-SAFI options"; + uses bgp-common-mp-ipv4-ipv6-unicast-common-config; + } + container state { + config false; + description + "State information for common IPv4 and IPv6 unicast + parameters"; + uses bgp-common-mp-ipv4-ipv6-unicast-common-config; + } + } + + grouping bgp-common-mp-l3vpn-ipv4-ipv6-unicast-common { + description + "Common configuration applied across L3VPN for IPv4 + and IPv6"; + + // placeholder -- specific configuration options that are generic + // across IPv[46] unicast address families. + uses bgp-common-mp-all-afi-safi-common; + } + + grouping bgp-common-mp-l3vpn-ipv4-ipv6-multicast-common { + description + "Common configuration applied across L3VPN for IPv4 + and IPv6"; + + // placeholder -- specific configuration options that are + // generic across IPv[46] multicast address families. + uses bgp-common-mp-all-afi-safi-common; + } + + grouping bgp-common-mp-l2vpn-common { + description + "Common configuration applied across L2VPN address + families"; + + // placeholder -- specific configuration options that are + // generic across L2VPN address families + uses bgp-common-mp-all-afi-safi-common; + } + + grouping bgp-common-mp-srte-policy-ipv4-group { + description + "Grouping for SR-TE for AFI 1"; + + container srte-policy-ipv4 { + when "../afi-safi-name = 'oc-bgp-types:SRTE_POLICY_IPV4'" { + description + "Only include this container when the address family is + specified to be SR-TE Policy SAFI for the IPv4 unicast + address family."; + } + + description + "Configuration and operational state parameters relating to + the SR-TE Policy SAFI for IPv4 Unicast."; + + uses bgp-common-mp-all-afi-safi-common; + } + } + + grouping bgp-common-mp-srte-policy-ipv6-group { + description + "Grouping for SR-TE for AFI 2"; + + container srte-policy-ipv6 { + when "../afi-safi-name = 'oc-bgp-types:SRTE_POLICY_IPV6'" { + description + "Only include this container when the address family is + specified to be SR-TE Policy SAFI for the IPv6 unicast + address family."; + } + + description + "Configuration and operational state parameters relating to + the SR-TE Policy SAFI for IPv6 Unicast."; + + uses bgp-common-mp-all-afi-safi-common; + } + } + + // Config groupings for common groups + grouping bgp-common-mp-all-afi-safi-common-prefix-limit-config { + description + "Configuration parameters relating to prefix-limits for an + AFI-SAFI"; + + leaf max-prefixes { + type uint32; + description + "Maximum number of prefixes that will be accepted + from the neighbour"; + } + + leaf prevent-teardown { + type boolean; + default false; + description + "Do not tear down the BGP session when the maximum + prefix limit is exceeded, but rather only log a + warning. The default of this leaf is false, such + that when it is not specified, the session is torn + down."; + } + + leaf warning-threshold-pct { + type oc-types:percentage; + description + "Threshold on number of prefixes that can be received + from a neighbour before generation of warning messages + or log entries. Expressed as a percentage of + max-prefixes"; + } + + leaf restart-timer { + type decimal64 { + fraction-digits 2; + } + units "seconds"; + description + "Time interval in seconds after which the BGP session + is re-established after being torn down due to exceeding + the max-prefix limit."; + } + } + + grouping bgp-common-mp-ipv4-ipv6-unicast-common-config { + description + "Common configuration parameters for IPv4 and IPv6 Unicast + address families"; + + leaf send-default-route { + type boolean; + default "false"; + description + "If set to true, send the default-route to the neighbour(s)"; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-common-structure.yang b/src/plugins/yang/openconfig/openconfig-bgp-common-structure.yang new file mode 100644 index 0000000..ad11db4 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-common-structure.yang @@ -0,0 +1,196 @@ +submodule openconfig-bgp-common-structure { + + belongs-to openconfig-bgp { + prefix "oc-bgp"; + } + + import openconfig-extensions { prefix oc-ext; } + + include openconfig-bgp-common-multiprotocol; + include openconfig-bgp-common; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This sub-module contains groupings that are common across multiple BGP + contexts and provide structure around other primitive groupings."; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + grouping bgp-common-structure-neighbor-group-logging-options { + description + "Structural grouping used to include error handling configuration and + state for both BGP neighbors and groups"; + + container logging-options { + description + "Logging options for events related to the BGP neighbor or + group"; + container config { + description + "Configuration parameters enabling or modifying logging + for events relating to the BGPgroup"; + uses bgp-common-neighbor-group-logging-options-config; + } + container state { + config false; + description + "State information relating to logging for the BGP neighbor + or group"; + uses bgp-common-neighbor-group-logging-options-config; + } + } + } + + grouping bgp-common-structure-neighbor-group-ebgp-multihop { + description + "Structural grouping used to include eBGP multihop configuration and + state for both BGP neighbors and peer groups"; + + container ebgp-multihop { + description + "eBGP multi-hop parameters for the BGPgroup"; + container config { + description + "Configuration parameters relating to eBGP multihop for the + BGP group"; + uses bgp-common-neighbor-group-multihop-config; + } + container state { + config false; + description + "State information for eBGP multihop, for the BGP neighbor + or group"; + uses bgp-common-neighbor-group-multihop-config; + } + } + } + + grouping bgp-common-structure-neighbor-group-route-reflector { + description + "Structural grouping used to include route reflector configuration and + state for both BGP neighbors and peer groups"; + + container route-reflector { + description + "Route reflector parameters for the BGPgroup"; + container config { + description + "Configuraton parameters relating to route reflection + for the BGPgroup"; + uses bgp-common-neighbor-group-route-reflector-config; + } + container state { + config false; + description + "State information relating to route reflection for the + BGPgroup"; + uses bgp-common-neighbor-group-route-reflector-config; + } + } + } + + grouping bgp-common-structure-neighbor-group-as-path-options { + description + "Structural grouping used to include AS_PATH manipulation configuration + and state for both BGP neighbors and peer groups"; + + container as-path-options { + description + "AS_PATH manipulation parameters for the BGP neighbor or + group"; + container config { + description + "Configuration parameters relating to AS_PATH manipulation + for the BGP peer or group"; + uses bgp-common-neighbor-group-as-path-options-config; + } + container state { + config false; + description + "State information relating to the AS_PATH manipulation + mechanisms for the BGP peer or group"; + uses bgp-common-neighbor-group-as-path-options-config; + } + } + } + + grouping bgp-common-structure-neighbor-group-add-paths { + description + "Structural grouping used to include ADD-PATHs configuration and state + for both BGP neighbors and peer groups"; + + container add-paths { + description + "Parameters relating to the advertisement and receipt of + multiple paths for a single NLRI (add-paths)"; + container config { + description + "Configuration parameters relating to ADD_PATHS"; + uses bgp-common-neighbor-group-add-paths-config; + } + container state { + config false; + description + "State information associated with ADD_PATHS"; + uses bgp-common-neighbor-group-add-paths-config; + } + } + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-common.yang b/src/plugins/yang/openconfig/openconfig-bgp-common.yang new file mode 100644 index 0000000..5194266 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-common.yang @@ -0,0 +1,665 @@ +submodule openconfig-bgp-common { + + belongs-to openconfig-bgp { + prefix "oc-bgp"; + } + + import openconfig-extensions { prefix oc-ext; } + import openconfig-bgp-types { prefix oc-bgp-types; } + import openconfig-routing-policy { prefix oc-rpol; } + import openconfig-types { prefix oc-types; } + import openconfig-inet-types { prefix oc-inet; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This sub-module contains common groupings that are common across + multiple contexts within the BGP module. That is to say that they + may be application to a subset of global, peer-group or neighbor + contexts."; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + grouping bgp-common-neighbor-group-timers-config { + description + "Config parameters related to timers associated with the BGP + peer"; + + leaf connect-retry { + type decimal64 { + fraction-digits 2; + } + default 30; + description + "Time interval in seconds between attempts to establish a + session with the peer."; + } + + leaf hold-time { + type decimal64 { + fraction-digits 2; + } + default 90; + description + "Time interval in seconds that a BGP session will be + considered active in the absence of keepalive or other + messages from the peer. The hold-time is typically + set to 3x the keepalive-interval."; + reference + "RFC 4271 - A Border Gateway Protocol 4, Sec. 10"; + } + + leaf keepalive-interval { + type decimal64 { + fraction-digits 2; + } + default 30; + description + "Time interval in seconds between transmission of keepalive + messages to the neighbor. Typically set to 1/3 the + hold-time."; + } + + leaf minimum-advertisement-interval { + type decimal64 { + fraction-digits 2; + } + default 30; + description + "Minimum time which must elapse between subsequent UPDATE + messages relating to a common set of NLRI being transmitted + to a peer. This timer is referred to as + MinRouteAdvertisementIntervalTimer by RFC 4721 and serves to + reduce the number of UPDATE messages transmitted when a + particular set of NLRI exhibit instability."; + reference + "RFC 4271 - A Border Gateway Protocol 4, Sec 9.2.1.1"; + } + } + + grouping bgp-common-neighbor-group-config { + description + "Neighbor level configuration items."; + + leaf peer-as { + type oc-inet:as-number; + description + "AS number of the peer."; + } + + leaf local-as { + type oc-inet:as-number; + description + "The local autonomous system number that is to be used + when establishing sessions with the remote peer or peer + group, if this differs from the global BGP router + autonomous system number."; + } + + leaf peer-type { + type oc-bgp-types:peer-type; + description + "Explicitly designate the peer or peer group as internal + (iBGP) or external (eBGP)."; + } + + leaf auth-password { + type oc-types:routing-password; + description + "Configures an MD5 authentication password for use with + neighboring devices."; + } + + leaf remove-private-as { + // could also make this a container with a flag to enable + // remove-private and separate option. here, option implies + // remove-private is enabled. + type oc-bgp-types:remove-private-as-option; + description + "Remove private AS numbers from updates sent to peers - when + this leaf is not specified, the AS_PATH attribute should be + sent to the peer unchanged"; + } + + leaf route-flap-damping { + type boolean; + default false; + description + "Enable route flap damping."; + } + + leaf send-community { + type oc-bgp-types:community-type; + default "NONE"; + description + "Specify which types of community should be sent to the + neighbor or group. The default is to not send the + community attribute"; + } + + leaf description { + type string; + description + "An optional textual description (intended primarily for use + with a peer or group"; + } + } + + grouping bgp-common-neighbor-group-transport-config { + description + "Configuration parameters relating to the transport protocol + used by the BGP session to the peer"; + + leaf tcp-mss { + type uint16; + description + "Sets the max segment size for BGP TCP sessions."; + } + + leaf mtu-discovery { + type boolean; + default false; + description + "Turns path mtu discovery for BGP TCP sessions on (true) + or off (false)"; + } + + leaf passive-mode { + type boolean; + default false; + description + "Wait for peers to issue requests to open a BGP session, + rather than initiating sessions from the local router."; + } + + leaf local-address { + type union { + type oc-inet:ip-address; + type string; + } + //TODO: the string should be converted to a leafref type + //to point to an interface when YANG 1.1 is available with + //leafrefs in union types. + description + "Set the local IP (either IPv4 or IPv6) address to use + for the session when sending BGP update messages. This + may be expressed as either an IP address or reference + to the name of an interface."; + } + } + + grouping bgp-common-neighbor-group-error-handling-config { + description + "Configuration parameters relating to enhanced error handling + behaviours for BGP"; + + leaf treat-as-withdraw { + type boolean; + default "false"; + description + "Specify whether erroneous UPDATE messages for which the + NLRI can be extracted are reated as though the NLRI is + withdrawn - avoiding session reset"; + reference "draft-ietf-idr-error-handling-16"; + } + } + + grouping bgp-common-neighbor-group-logging-options-config { + description + "Configuration parameters specifying the logging behaviour for + BGP sessions to the peer"; + + leaf log-neighbor-state-changes { + type boolean; + default "true"; + description + "Configure logging of peer state changes. Default is + to enable logging of peer state changes."; + } + } + + grouping bgp-common-neighbor-group-multihop-config { + description + "Configuration parameters specifying the multihop behaviour for + BGP sessions to the peer"; + + leaf enabled { + type boolean; + default "false"; + description + "When enabled the referenced group or neighbors are permitted + to be indirectly connected - including cases where the TTL + can be decremented between the BGP peers"; + } + + leaf multihop-ttl { + type uint8; + description + "Time-to-live value to use when packets are sent to the + referenced group or neighbors and ebgp-multihop is enabled"; + } + } + + grouping bgp-common-neighbor-group-route-reflector-config { + description + "Configuration parameters determining whether the behaviour of + the local system when acting as a route-reflector"; + + leaf route-reflector-cluster-id { + type oc-bgp-types:rr-cluster-id-type; + description + "route-reflector cluster id to use when local router is + configured as a route reflector. Commonly set at the group + level, but allows a different cluster + id to be set for each neighbor."; + } + + leaf route-reflector-client { + type boolean; + default "false"; + description + "Configure the neighbor as a route reflector client."; + } + } + + grouping bgp-common-neighbor-group-as-path-options-config { + description + "Configuration parameters allowing manipulation of the AS_PATH + attribute"; + + leaf allow-own-as { + type uint8; + default 0; + description + "Specify the number of occurrences of the local BGP speaker's + AS that can occur within the AS_PATH before it is rejected."; + } + + leaf replace-peer-as { + type boolean; + default "false"; + description + "Replace occurrences of the peer's AS in the AS_PATH + with the local autonomous system number"; + } + + leaf disable-peer-as-filter { + type boolean; + default "false"; + description + "When set to true, the system advertises routes to a peer + even if the peer's AS was in the AS path. The default + behavior (false) suppresses advertisements to peers if + their AS number is in the AS path of the route."; + } + } + + grouping bgp-common-neighbor-group-add-paths-config { + description + "Configuration parameters specfying whether the local system + will send or receive multiple paths using ADD_PATHS"; + + leaf receive { + type boolean; + default false; + description + "Enable capability negotiation to receive multiple path + advertisements for an NLRI from the neighbor or group"; + reference + "RFC 7911 - Advertisement of Multiple Paths in BGP"; + } + + leaf send { + type boolean; + default false; + description + "Enable capability negotiation to send multiple path + advertisements for an NLRI from the neighbor or group"; + reference + "RFC 7911 - Advertisement of Multiple Paths in BGP"; + } + + leaf send-max { + type uint8; + description + "The maximum total number of paths to advertise to neighbors + for a single NLRI. This includes the single best path as + well as additional paths advertised when add-paths is + enabled."; + } + + leaf eligible-prefix-policy { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:name"; + } + description + "A reference to a routing policy which can be used to + restrict the prefixes for which add-paths is enabled"; + } + } + + grouping bgp-common-graceful-restart-config { + description + "Configuration parameters relating to BGP graceful restart."; + + leaf enabled { + type boolean; + description + "Enable or disable the graceful-restart capability."; + } + + leaf restart-time { + type uint16 { + range 0..4096; + } + description + "Estimated time (in seconds) for the local BGP speaker to + restart a session. This value is advertise in the graceful + restart BGP capability. This is a 12-bit value, referred to + as Restart Time in RFC4724. Per RFC4724, the suggested + default value is <= the hold-time value."; + } + + leaf stale-routes-time { + type decimal64 { + fraction-digits 2; + } + description + "An upper-bound on the time thate stale routes will be + retained by a router after a session is restarted. If an + End-of-RIB (EOR) marker is received prior to this timer + expiring stale-routes will be flushed upon its receipt - if + no EOR is received, then when this timer expires stale paths + will be purged. This timer is referred to as the + Selection_Deferral_Timer in RFC4724"; + } + + leaf helper-only { + type boolean; + description + "Enable graceful-restart in helper mode only. When this + leaf is set, the local system does not retain forwarding + its own state during a restart, but supports procedures + for the receiving speaker, as defined in RFC4724."; + } + } + + grouping bgp-common-use-multiple-paths-config { + description + "Generic configuration options relating to use of multiple + paths for a referenced AFI-SAFI, group or neighbor"; + + leaf enabled { + type boolean; + default false; + description + "Whether the use of multiple paths for the same NLRI is + enabled for the neighbor. This value is overridden by + any more specific configuration value."; + } + } + + grouping bgp-common-use-multiple-paths-ebgp-as-options-config { + description + "Configuration parameters specific to eBGP multipath applicable + to all contexts"; + + leaf allow-multiple-as { + type boolean; + default "false"; + description + "Allow multipath to use paths from different neighbouring + ASes. The default is to only consider multiple paths from + the same neighbouring AS."; + } + } + + grouping bgp-common-global-group-use-multiple-paths { + description + "Common grouping used for both global and groups which provides + configuration and state parameters relating to use of multiple + paths"; + + container use-multiple-paths { + description + "Parameters related to the use of multiple paths for the + same NLRI"; + + container config { + description + "Configuration parameters relating to multipath"; + uses bgp-common-use-multiple-paths-config; + } + container state { + config false; + description + "State parameters relating to multipath"; + uses bgp-common-use-multiple-paths-config; + } + + container ebgp { + description + "Multipath parameters for eBGP"; + container config { + description + "Configuration parameters relating to eBGP multipath"; + uses bgp-common-use-multiple-paths-ebgp-config; + } + container state { + config false; + description + "State information relating to eBGP multipath"; + uses bgp-common-use-multiple-paths-ebgp-config; + } + } + + container ibgp { + description + "Multipath parameters for iBGP"; + container config { + description + "Configuration parameters relating to iBGP multipath"; + uses bgp-common-use-multiple-paths-ibgp-config; + } + container state { + config false; + description + "State information relating to iBGP multipath"; + uses bgp-common-use-multiple-paths-ibgp-config; + } + } + } + } + + grouping bgp-common-use-multiple-paths-ebgp-config { + description + "Configuration parameters relating to multipath for eBGP"; + + leaf allow-multiple-as { + type boolean; + default "false"; + description + "Allow multipath to use paths from different neighbouring + ASes. The default is to only consider multiple paths from + the same neighbouring AS."; + } + + leaf maximum-paths { + type uint32; + default 1; + description + "Maximum number of parallel paths to consider when using + BGP multipath. The default is use a single path."; + } + } + + grouping bgp-common-use-multiple-paths-ibgp-config { + description + "Configuration parmaeters relating to multipath for iBGP"; + + leaf maximum-paths { + type uint32; + default 1; + description + "Maximum number of parallel paths to consider when using + iBGP multipath. The default is to use a single path"; + } + } + + grouping bgp-common-route-selection-options-config { + description + "Set of configuration options that govern best + path selection."; + + leaf always-compare-med { + type boolean; + default "false"; + description + "Compare multi-exit discriminator (MED) value from + different ASes when selecting the best route. The + default behavior is to only compare MEDs for paths + received from the same AS."; + } + + leaf ignore-as-path-length { + type boolean; + default "false"; + description + "Ignore the AS path length when selecting the best path. + The default is to use the AS path length and prefer paths + with shorter length."; + } + + leaf external-compare-router-id { + type boolean; + default "true"; + description + "When comparing similar routes received from external + BGP peers, use the router-id as a criterion to select + the active path."; + } + + leaf advertise-inactive-routes { + type boolean; + default "false"; + description + "Advertise inactive routes to external peers. The + default is to only advertise active routes."; + } + + leaf enable-aigp { + type boolean; + default false; + description + "Flag to enable sending / receiving accumulated IGP + attribute in routing updates"; + } + + leaf ignore-next-hop-igp-metric { + type boolean; + default "false"; + description + "Ignore the IGP metric to the next-hop when calculating + BGP best-path. The default is to select the route for + which the metric to the next-hop is lowest"; + } + } + + grouping bgp-common-route-selection-options { + description + "Configuration and state relating to route selection options"; + + container route-selection-options { + description + "Parameters relating to options for route selection"; + container config { + description + "Configuration parameters relating to route selection + options"; + uses bgp-common-route-selection-options-config; + } + container state { + config false; + description + "State information for the route selection options"; + uses bgp-common-route-selection-options-config; + } + } + } + + grouping bgp-common-state { + description + "Grouping containing common counters relating to prefixes and + paths"; + + leaf total-paths { + type uint32; + description + "Total number of BGP paths within the context"; + } + + leaf total-prefixes { + type uint32; + description + "Total number of BGP prefixes received within the context"; + } + } + + +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-errors.yang b/src/plugins/yang/openconfig/openconfig-bgp-errors.yang new file mode 100644 index 0000000..f53a932 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-errors.yang @@ -0,0 +1,421 @@ +submodule openconfig-bgp-errors { + + belongs-to openconfig-bgp-types { + prefix "oc-bgp-types"; + } + + import openconfig-extensions { prefix "oc-ext"; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module defines BGP NOTIFICATION message error codes + and subcodes"; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + identity BGP_ERROR_CODE { + description + "Indicates the error type in a BGP NOTIFICATION message"; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + identity BGP_ERROR_SUBCODE { + description + "Provides more specific information about the nature of the + error reported in a NOTIFICATION message. Each Error + Code may have one or more Error Subcodes associated with it."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + + identity UNSPECIFIC { + base BGP_ERROR_SUBCODE; + description + "The error subcode field is unspecific when the NOTIFICATION + message does not include any specific error subcode (i.e.., + value 0)."; + } + + identity MESSAGE_HEADER_ERROR { + base BGP_ERROR_CODE; + description + "Errors detected while processing the Message Header"; + } + + identity OPEN_MESSAGE_ERROR { + base BGP_ERROR_CODE; + description + "Errors detected while processing the OPEN message"; + } + + identity UPDATE_MESSAGE_ERROR { + base BGP_ERROR_CODE; + description + "Errors detected while processing the UPDATE message"; + } + + identity HOLD_TIMER_EXPIRED { + base BGP_ERROR_CODE; + description + "Indicates that the system did not receive successive + KEEPALIVE, UPDATE, and/or NOTIFICATION messages within the + period specified in the Hold Time field of the OPEN message"; + } + + identity FINITE_STATE_MACHINE_ERROR { + base BGP_ERROR_CODE; + description + "Error detected by the BGP Finite State Machine + (e.g., receipt of an unexpected event)"; + } + + identity CEASE { + base BGP_ERROR_CODE; + description + "Sent by a BGP peer to close its BGP connection in absence of + any fatal errors. If the BGP speaker terminates its + connection with a neihbor because the number of prefixes + received exceeds the configured upper bound, the speaker must + send the neighbor a NOTIFICATION message with the Cease + error code."; + } + + identity ROUTE_REFRESH_MESSAGE_ERROR { + base BGP_ERROR_CODE; + description + "The length, excluding the fixed-size message header, of the + received ROUTE-REFRESH message with Message Subtype 1 and 2 is + not 4. Applicable only when a BGP speaker has received the + 'Enhanced Route Refresh Capability' from a peer"; + reference + "RFC 7313 - Enhanced Route Refresh Capability for BGP-4"; + } + + identity MESSAGE_HEADER_SUBCODE { + base BGP_ERROR_SUBCODE; + description + "Error subcode definitions for Message Header error + notifications"; + } + + identity CONNECTION_NOT_SYNCHRONIZED { + base MESSAGE_HEADER_SUBCODE; + description + "Marker field of the message header is not all ones as + expected"; + } + + identity BAD_MESSAGE_LENGTH { + base MESSAGE_HEADER_SUBCODE; + description + "Indicates the message has an erroneous length with one + or more of the following: + + - the Length field of the message header is less than 19 or + greater than 4096 + + - the Length field of an OPEN message is less than the minimum + length of the OPEN message + + - the Length field of an UPDATE message is less than the + minimum length of the UPDATE message + + - the Length field of a KEEPALIVE message is not equal to 19 + + - the Length field of a NOTIFICATION message is less than the + minimum length of the NOTIFICATION message + + The erroneous Length field must be reported in the + NOTIFICATION data."; + } + + identity BAD_MESSAGE_TYPE { + base MESSAGE_HEADER_SUBCODE; + description + "Type field of the message header is not recognized. The + erroneous type field must be reported in the NOTIFICATION + data"; + } + + identity OPEN_MESSAGE_SUBCODE { + base BGP_ERROR_SUBCODE; + description + "Error subcode definitions for OPEN message error + notifications"; + } + + identity UNSUPPORTED_VERSION_NUMBER { + base OPEN_MESSAGE_SUBCODE; + description + "Version number in the Version field of the received OPEN + message is not supported"; + } + + identity BAD_PEER_AS { + base OPEN_MESSAGE_SUBCODE; + description + "Autonomous System field of the OPEN message is unacceptable"; + } + + identity BAD_BGP_IDENTIFIER { + base OPEN_MESSAGE_SUBCODE; + description + "BGP Identifier field of the OPEN message is syntactically + incorrect"; + } + + identity UNSUPPORTED_OPTIONAL_PARAMETER { + base OPEN_MESSAGE_SUBCODE; + description + "One of the Optional Parameters in the OPEN message is not + recognized"; + } + + identity UNACCEPTABLE_HOLD_TIME { + base OPEN_MESSAGE_SUBCODE; + description + "Hold Time field of the OPEN message is unacceptable"; + } + + identity UNSUPPORTED_CAPABILITY { + base OPEN_MESSAGE_SUBCODE; + description + "Inidicates that the peer does not support capabilities + advertisement -- the peer may send this subcode in response to + an OPEN message that carries the Capabilities Optional + Parameter"; + reference + "RFC 5492 - Capabilities Advertisement with BGP-4"; + } + + identity UPDATE_MESSAGE_SUBCODE { + base BGP_ERROR_SUBCODE; + description + "Error subcode definitions for UPDATE message error + notifications"; + } + + identity MALFORMED_ATTRIBUTE_LIST { + base UPDATE_MESSAGE_SUBCODE; + description + "Inidicates Withdrawn Routes Length or Total Attribute Length + is too large, or + + An attribute appears more than once in the UPDATE message"; + } + + identity UNRECOGNIZED_WELL_KNOWN_ATTRIBUTE { + base UPDATE_MESSAGE_SUBCODE; + description + "One or more of the well-known mandatory attributes are not + recognized"; + } + + identity MISSING_WELL_KNOWN_ATTRIBUTE { + base UPDATE_MESSAGE_SUBCODE; + description + "One or more of the well-known mandatory attributes are not + present"; + } + + identity ATTRIBUTE_FLAGS_ERROR { + base UPDATE_MESSAGE_SUBCODE; + description + "Attribute has Attribute Flags that conflict with the + Attribute Type Code"; + } + + identity ATTRIBUTE_LENGTH_ERROR { + base UPDATE_MESSAGE_SUBCODE; + description + "Attribute has an Attribute Length that conflicts with the + expected length (based on the attribute type code)"; + } + + identity INVALID_ORIGIN_ATTRIBUTE { + base UPDATE_MESSAGE_SUBCODE; + description + "ORIGIN attribute has an undefined value"; + } + + identity INVALID_NEXT_HOP_ATTRIBUTE { + base UPDATE_MESSAGE_SUBCODE; + description + "The NEXT_HOP attribute field is syntactically incorrect"; + } + + identity OPTIONAL_ATTRIBUTE_ERROR { + base UPDATE_MESSAGE_SUBCODE; + description + "An error is detected in the value of a recognized optional + attribute (such an attribute must be discarded)"; + } + + identity INVALID_NETWORK_FIELD { + base UPDATE_MESSAGE_SUBCODE; + description + "The NLRI field in the UPDATE message is syntactically + incorrect"; + } + + identity MALFORMED_AS_PATH { + base UPDATE_MESSAGE_SUBCODE; + description + "The AS_PATH attribute is syntactically incorrect"; + } + + identity FINITE_STATE_MACHINE_SUBCODE { + base BGP_ERROR_SUBCODE; + description + "Error subcode definitions for BGP finite state machine + errors."; + reference + "RFC 6608 - Subcodes for BGP Finite State Machine Error"; + } + + identity RECEIVE_UNEXPECTED_MESSAGE_OPENSENT { + base FINITE_STATE_MACHINE_SUBCODE; + description + "The peer BGP speaker received an unexpected message from + the local system while the peer speaker session was in the + OpenSent state"; + } + + identity RECEIVE_UNEXPECTED_MESSAGE_OPENCONFIRM { + base FINITE_STATE_MACHINE_SUBCODE; + description + "The peer BGP speaker received an unexpected message from + the local system while the peer speaker session was in the + OpenConfirm state"; + } + + identity RECEIVE_UNEXPECTED_MESSAGE_ESTABLISHED { + base FINITE_STATE_MACHINE_SUBCODE; + description + "The peer BGP speaker received an unexpected message from + the local system while the peer speaker session was in the + Established state"; + } + + identity CEASE_SUBCODE { + base BGP_ERROR_SUBCODE; + description + "Error subcode definitions for Cease notification messages"; + reference + "RFC 4486 - Subcodes for BGP Cease Notification Message"; + } + + identity MAX_NUM_PREFIXES_REACHED { + base CEASE_SUBCODE; + description + "The peer BGP speaker terminated its peering with the local + system because the number of address prefixes received + exceeds a locally configured upper bound"; + } + + identity ADMINISTRATIVE_SHUTDOWN { + base CEASE_SUBCODE; + description + "The peer BGP speaker administratively shut down its peering + with the local system"; + } + + identity PEER_DE_CONFIGURED { + base CEASE_SUBCODE; + description + "The peer BGP speaker de-configure the peering with the local + system"; + } + + identity ADMINISTRATIVE_RESET { + base CEASE_SUBCODE; + description + "The peer BGP speaker administratively reset the peering with + the local system"; + } + + identity CONNECTION_REJECTED { + base CEASE_SUBCODE; + description + "The peer BGP speaker disallowed the BGP connection to the + local system after the peer speaker accepted a transport + protocol connection"; + } + + identity OTHER_CONFIG_CHANGE { + base CEASE_SUBCODE; + description + "The peer BGP speaker administratively reset the peering with + the local sytem due to a configuration change that is not + covered by another subcode."; + } + + identity CONN_COLLISION_RESOLUTION { + base CEASE_SUBCODE; + description + "The peer BGP speaker sent a CEASE NOTIFICATION as a result of + the collision resolution procedure described in RFC 4271"; + } + + identity OUT_OF_RESOURCES { + base CEASE_SUBCODE; + description + "The peer BGP speaker ran out of resources (e.g., memory) and + reset the session with the local system"; + } + + identity ROUTE_REFRESH_SUBCODE { + base BGP_ERROR_SUBCODE; + description + "Error subcode definitions for the ROUTE-REFRESH message + error"; + } + + identity INVALID_MESSAGE_LENGTH { + base ROUTE_REFRESH_SUBCODE; + description + "The length, excluding the fixed-size message header, of the + received ROUTE-REFRESH message with Message Subtype 1 and 2 + is not 4"; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-global.yang b/src/plugins/yang/openconfig/openconfig-bgp-global.yang new file mode 100644 index 0000000..643fba1 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-global.yang @@ -0,0 +1,389 @@ +submodule openconfig-bgp-global { + + belongs-to openconfig-bgp { + prefix "oc-bgp"; + } + + import openconfig-extensions { prefix oc-ext; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-inet-types { prefix oc-inet; } + + // Include common submodules + include openconfig-bgp-common; + include openconfig-bgp-common-multiprotocol; + include openconfig-bgp-peer-group; + include openconfig-bgp-common-structure; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This sub-module contains groupings that are specific to the + global context of the OpenConfig BGP module"; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + grouping bgp-global-config { + description + "Global configuration options for the BGP router."; + + leaf as { + type oc-inet:as-number; +// mandatory true; + description + "Local autonomous system number of the router. Uses + the 32-bit as-number type from the model in RFC 6991."; + } + + leaf router-id { + type oc-yang:dotted-quad; + description + "Router id of the router - an unsigned 32-bit integer + expressed in dotted quad notation."; + reference + "RFC4271 - A Border Gateway Protocol 4 (BGP-4), + Section 4.2"; + } + } + + grouping bgp-global-state { + description + "Operational state parameters for the BGP neighbor"; + + uses bgp-common-state; + } + + grouping bgp-global-default-route-distance-config { + description + "Configuration options relating to the administrative distance + (or preference) assigned to routes received from different + sources (external, internal, and local)."; + + leaf external-route-distance { + type uint8 { + range "1..255"; + } + description + "Administrative distance for routes learned from external + BGP (eBGP)."; + } + leaf internal-route-distance { + type uint8 { + range "1..255"; + } + description + "Administrative distance for routes learned from internal + BGP (iBGP)."; + } + } + + grouping bgp-global-confederation-config { + description + "Configuration options specifying parameters when the local + router is within an autonomous system which is part of a BGP + confederation."; + + leaf identifier { + type oc-inet:as-number; + description + "Confederation identifier for the autonomous system. + Setting the identifier indicates that the local-AS is part + of a BGP confederation."; + } + + leaf-list member-as { + type oc-inet:as-number; + description + "Remote autonomous systems that are to be treated + as part of the local confederation."; + } + } + + grouping bgp-global-dynamic-neighbors { + description + "Grouping containing configuration relating to dynamic peers."; + + container dynamic-neighbor-prefixes { + description + "A list of IP prefixes from which the system should: + - Accept connections to the BGP daemon + - Dynamically configure a BGP neighbor corresponding to the + source address of the remote system, using the parameters + of the specified peer-group. + For such neighbors, an entry within the neighbor list should + be created, indicating that the peer was dynamically + configured, and referencing the peer-group from which the + configuration was derived."; + + list dynamic-neighbor-prefix { + key "prefix"; + description + "An individual prefix from which dynamic neighbor + connections are allowed."; + + leaf prefix { + type leafref { + path "../config/prefix"; + } + description + "Reference to the IP prefix from which source connections + are allowed for the dynamic neighbor group."; + } + + container config { + description + "Configuration parameters relating to the source prefix + for the dynamic BGP neighbor connections."; + + uses bgp-global-dynamic-neighbor-config; + } + + container state { + config false; + description + "Operational state parameters relating to the source + prefix for the dynamic BGP neighbor connections."; + + uses bgp-global-dynamic-neighbor-config; + } + } + } + } + + grouping bgp-global-dynamic-neighbor-config { + description + "Configuration parameters relating to an individual prefix from + which dynamic neighbors are accepted."; + + leaf prefix { + type oc-inet:ip-prefix; + description + "The IP prefix within which the source address of the remote + BGP speaker must fall to be considered eligible to the + dynamically configured."; } + + leaf peer-group { + type leafref { + // At bgp/global/dynamic-neighbor-prefixes/dynamic-neighbor + // prefix/config/peer-group + path "../../../../../peer-groups/peer-group/config/" + + "peer-group-name"; + } + description + "The peer-group within which the dynamic neighbor will be + configured. The configuration parameters used for the dynamic + neighbor are those specified within the referenced peer + group."; + } + } + + grouping bgp-global-mp-all-afi-safi-list-contents { + description + "A grouping used for contents of the list of AFI-SAFI + entries at the global BGP level."; + + // import and export policy included for the afi/safi + + uses bgp-common-mp-ipv4-unicast-group; + uses bgp-common-mp-ipv6-unicast-group; + uses bgp-common-mp-ipv4-labeled-unicast-group; + uses bgp-common-mp-ipv6-labeled-unicast-group; + uses bgp-common-mp-l3vpn-ipv4-unicast-group; + uses bgp-common-mp-l3vpn-ipv6-unicast-group; + uses bgp-common-mp-l3vpn-ipv4-multicast-group; + uses bgp-common-mp-l3vpn-ipv6-multicast-group; + uses bgp-common-mp-l2vpn-vpls-group; + uses bgp-common-mp-l2vpn-evpn-group; + uses bgp-common-mp-srte-policy-ipv4-group; + uses bgp-common-mp-srte-policy-ipv6-group; + } + + grouping bgp-global-afi-safi-list { + description + "List of address-families associated with the BGP instance"; + + list afi-safi { + key "afi-safi-name"; + + description + "AFI,SAFI configuration available for the + neighbour or group"; + + leaf afi-safi-name { + type leafref { + path "../config/afi-safi-name"; + } + description + "Reference to the AFI-SAFI name used as a key + for the AFI-SAFI list"; + } + + container config { + description + "Configuration parameters for the AFI-SAFI"; + uses bgp-common-mp-afi-safi-config; + } + container state { + config false; + description + "State information relating to the AFI-SAFI"; + uses bgp-common-mp-afi-safi-config; + uses bgp-common-state; + } + + container graceful-restart { + description + "Parameters relating to BGP graceful-restart"; + container config { + description + "Configuration options for BGP graceful-restart"; + uses bgp-common-mp-afi-safi-graceful-restart-config; + } + container state { + config false; + description + "State information for BGP graceful-restart"; + uses bgp-common-mp-afi-safi-graceful-restart-config; + } + } + + uses bgp-common-route-selection-options; + uses bgp-common-global-group-use-multiple-paths; + uses bgp-common-structure-neighbor-group-add-paths; + uses bgp-global-mp-all-afi-safi-list-contents; + } + } + + // Structural groupings + grouping bgp-global-base { + description + "Global configuration parameters for the BGP router"; + + container config { + description + "Configuration parameters relating to the global BGP router"; + uses bgp-global-config; + } + container state { + config false; + description + "State information relating to the global BGP router"; + uses bgp-global-config; + uses bgp-global-state; + } + + container default-route-distance { + description + "Administrative distance (or preference) assigned to + routes received from different sources + (external, internal, and local)."; + + container config { + description + "Configuration parameters relating to the default route + distance"; + uses bgp-global-default-route-distance-config; + } + container state { + config false; + description + "State information relating to the default route distance"; + uses bgp-global-default-route-distance-config; + } + } + + container confederation { + description + "Parameters indicating whether the local system acts as part + of a BGP confederation"; + + container config { + description + "Configuration parameters relating to BGP confederations"; + uses bgp-global-confederation-config; + } + container state { + config false; + description + "State information relating to the BGP confederations"; + uses bgp-global-confederation-config; + } + } + + container graceful-restart { + description + "Parameters relating the graceful restart mechanism for BGP"; + container config { + description + "Configuration parameters relating to graceful-restart"; + uses bgp-common-graceful-restart-config; + } + container state { + config false; + description + "State information associated with graceful-restart"; + uses bgp-common-graceful-restart-config; + } + } + + uses bgp-common-global-group-use-multiple-paths; + uses bgp-common-route-selection-options; + + container afi-safis { + description + "Address family specific configuration"; + uses bgp-global-afi-safi-list; + } + + uses bgp-global-dynamic-neighbors; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-neighbor.yang b/src/plugins/yang/openconfig/openconfig-bgp-neighbor.yang new file mode 100644 index 0000000..f7ae33b --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-neighbor.yang @@ -0,0 +1,704 @@ +submodule openconfig-bgp-neighbor { + + belongs-to openconfig-bgp { + prefix "oc-bgp"; + } + + import openconfig-extensions { prefix oc-ext; } + import openconfig-routing-policy { prefix oc-rpol; } + import openconfig-types { prefix oc-types; } + import openconfig-bgp-types { prefix oc-bgp-types; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-yang-types { prefix oc-yang; } + + // Include the common submodule + include openconfig-bgp-common; + include openconfig-bgp-common-multiprotocol; + include openconfig-bgp-peer-group; + include openconfig-bgp-common-structure; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This sub-module contains groupings that are specific to the + neighbor context of the OpenConfig BGP module."; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + grouping bgp-neighbor-config { + description + "Configuration parameters relating to a base BGP neighbor that + are not also applicable to any other context + (e.g., peer group)"; + + leaf peer-group { + type leafref { + path "../../../../peer-groups/peer-group/peer-group-name"; + } + description + "The peer-group with which this neighbor is associated"; + } + + leaf neighbor-address { + type oc-inet:ip-address; + description + "Address of the BGP peer, either in IPv4 or IPv6"; + } + + leaf enabled { + type boolean; + default true; + description + "Whether the BGP peer is enabled. In cases where the + enabled leaf is set to false, the local system should not + initiate connections to the neighbor, and should not + respond to TCP connections attempts from the neighbor. If + the state of the BGP session is ESTABLISHED at the time + that this leaf is set to false, the BGP session should be + ceased."; + } + } + + grouping bgp-neighbor-use-multiple-paths { + description + "Multipath configuration and state applicable to a BGP + neighbor"; + + container use-multiple-paths { + description + "Parameters related to the use of multiple-paths for the same + NLRI when they are received only from this neighbor"; + + container config { + description + "Configuration parameters relating to multipath"; + uses bgp-common-use-multiple-paths-config; + } + container state { + config false; + description + "State parameters relating to multipath"; + uses bgp-common-use-multiple-paths-config; + } + + container ebgp { + description + "Multipath configuration for eBGP"; + container config { + description + "Configuration parameters relating to eBGP multipath"; + uses bgp-common-use-multiple-paths-ebgp-as-options-config; + } + container state { + config false; + description + "State information relating to eBGP multipath"; + uses bgp-common-use-multiple-paths-ebgp-as-options-config; + } + } + } + } + + grouping bgp-neighbor-state { + description + "Operational state parameters relating only to a BGP neighbor"; + + leaf session-state { + type enumeration { + enum IDLE { + description + "neighbor is down, and in the Idle state of the + FSM"; + } + enum CONNECT { + description + "neighbor is down, and the session is waiting for + the underlying transport session to be established"; + } + enum ACTIVE { + description + "neighbor is down, and the local system is awaiting + a conncetion from the remote peer"; + } + enum OPENSENT { + description + "neighbor is in the process of being established. + The local system has sent an OPEN message"; + } + enum OPENCONFIRM { + description + "neighbor is in the process of being established. + The local system is awaiting a NOTIFICATION or + KEEPALIVE message"; + } + enum ESTABLISHED { + description + "neighbor is up - the BGP session with the peer is + established"; + } + } + description + "Operational state of the BGP peer"; + } + + leaf last-established { + type oc-types:timeticks64; + description + "This timestamp indicates the time that the + BGP session last transitioned in or out of the Established + state. The value is the timestamp in seconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC). + + The BGP session uptime can be computed by clients as the + difference between this value and the current time in UTC + (assuming the session is in the ESTABLISHED state, per the + session-state leaf)."; + } + + leaf established-transitions { + type oc-yang:counter64; + description + "Number of transitions to the Established state for + the neighbor session. This value is analogous to the + bgpPeerFsmEstablishedTransitions object from the standard + BGP-4 MIB"; + reference + "RFC 4273 - Definitions of Managed Objects for BGP-4"; + } + + leaf-list supported-capabilities { + type identityref { + base oc-bgp-types:BGP_CAPABILITY; + } + description + "BGP capabilities negotiated as supported with the peer"; + } + + container messages { + description + "Counters for BGP messages sent and received from the + neighbor"; + container sent { + description + "Counters relating to BGP messages sent to the neighbor"; + uses bgp-neighbor-counters-message-types-state; + } + + container received { + description + "Counters for BGP messages received from the neighbor"; + uses bgp-neighbor-counters-message-types-state; + } + } + + container queues { + description + "Counters related to queued messages associated with the + BGP neighbor"; + uses bgp-neighbor-queue-counters-state; + } + + leaf dynamically-configured { + type boolean; + default false; + description + "When this leaf is set to true, the peer was configured dynamically + due to an inbound connection request from a specified source prefix + within a dynamic-neighbor-prefix."; + } + } + + grouping bgp-neighbor-counters-message-types-state { + description + "Grouping of BGP message types, included for re-use + across counters"; + + leaf UPDATE { + type uint64; + description + "Number of BGP UPDATE messages announcing, withdrawing + or modifying paths exchanged."; + } + + leaf NOTIFICATION { + type uint64; + description + "Number of BGP NOTIFICATION messages indicating an + error condition has occurred exchanged."; + } + + leaf last-notification-time { + type oc-types:timeticks64; + description + "This timestamp indicates the time that a NOTIFICATION + message was sent or received on the peering session + (based on whether this leaf is associated with + sent or received messages). + + The value is the timestamp in seconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf last-notification-error-code { + type identityref { + base oc-bgp-types:BGP_ERROR_CODE; + } + description + "Indicates the last BGP error sent or received on the peering + session (based on whether this leaf is associated with + sent or received messages)."; + } + + leaf last-notification-error-subcode { + type identityref { + base oc-bgp-types:BGP_ERROR_SUBCODE; + } + description + "Indicates the last BGP error subcode sent or received on + the peering session (based on whether this leaf is associated + with sent or received messages)"; + } + } + + grouping bgp-neighbor-queue-counters-state { + description + "Counters relating to the message queues associated with the + BGP peer"; + + leaf input { + type uint32; + description + "The number of messages received from the peer currently + queued"; + } + + leaf output { + type uint32; + description + "The number of messages queued to be sent to the peer"; + } + } + + grouping bgp-neighbor-transport-state { + description + "Operational state parameters relating to the transport session + used for the BGP session"; + + leaf local-port { + type oc-inet:port-number; + description + "Local TCP port being used for the TCP session supporting + the BGP session"; + } + + leaf remote-address { + type oc-inet:ip-address; + description + "Remote address to which the BGP session has been + established"; + } + + leaf remote-port { + type oc-inet:port-number; + description + "Remote port being used by the peer for the TCP session + supporting the BGP session"; + } + } + + grouping bgp-neighbor-error-handling-state { + description + "Operational state parameters relating to enhanced error + error handling for BGP"; + + leaf erroneous-update-messages { + type uint32; + description + "The number of BGP UPDATE messages for which the + treat-as-withdraw mechanism has been applied based + on erroneous message contents"; + } + } + + grouping bgp-neighbor-timers-state { + description + "Operational state parameters relating to BGP timers associated + with the BGP session"; + + leaf negotiated-hold-time { + type decimal64 { + fraction-digits 2; + } + description + "The negotiated hold-time for the BGP session"; + } + } + + grouping bgp-neighbor-afi-safi-graceful-restart-state { + description + "Operational state variables relating to the graceful-restart + mechanism on a per-AFI-SAFI basis"; + + leaf received { + type boolean; + description + "This leaf indicates whether the neighbor advertised the + ability to support graceful-restart for this AFI-SAFI"; + } + + leaf advertised { + type boolean; + description + "This leaf indicates whether the ability to support + graceful-restart has been advertised to the peer"; + } + } + + grouping bgp-neighbor-graceful-restart-state { + description + "Operational state information relevant to graceful restart + for BGP"; + + leaf peer-restart-time { + type uint16 { + range 0..4096; + } + description + "The period of time (advertised by the peer) that + the peer expects a restart of a BGP session to + take"; + } + + leaf peer-restarting { + type boolean; + description + "This flag indicates whether the remote neighbor is currently + in the process of restarting, and hence received routes are + currently stale"; + } + + leaf local-restarting { + type boolean; + description + "This flag indicates whether the local neighbor is currently + restarting. The flag is unset after all NLRI have been + advertised to the peer, and the End-of-RIB (EOR) marker has + been unset"; + } + + leaf mode { + type enumeration { + enum HELPER_ONLY { + description + "The local router is operating in helper-only mode, and + hence will not retain forwarding state during a local + session restart, but will do so during a restart of the + remote peer"; + } + enum BILATERAL { + description + "The local router is operating in both helper mode, and + hence retains forwarding state during a remote restart, + and also maintains forwarding state during local session + restart"; + } + enum REMOTE_HELPER { + description + "The local system is able to retain routes during restart + but the remote system is only able to act as a helper"; + } + } + description + "Ths leaf indicates the mode of operation of BGP graceful + restart with the peer"; + } + } + + grouping bgp-neighbor-afi-safi-state { + description + "Operational state parameters relating to an individual AFI, + SAFI for a neighbor"; + + leaf active { + type boolean; + description + "This value indicates whether a particular AFI-SAFI has + been succesfully negotiated with the peer. An AFI-SAFI + may be enabled in the current running configuration, but a + session restart may be required in order to negotiate the new + capability."; + } + + container prefixes { + description "Prefix counters for the BGP session"; + leaf received { + type uint32; + description + "The number of prefixes received from the neighbor"; + } + + leaf sent { + type uint32; + description + "The number of prefixes advertised to the neighbor"; + } + + leaf installed { + type uint32; + description + "The number of advertised prefixes installed in the + Loc-RIB"; + } + } + } + + grouping bgp-neighbor-afi-safi-list { + description + "List of address-families associated with the BGP neighbor"; + + list afi-safi { + key "afi-safi-name"; + + description + "AFI,SAFI configuration available for the + neighbour or group"; + + + leaf afi-safi-name { + type leafref { + path "../config/afi-safi-name"; + } + description + "Reference to the AFI-SAFI name used as a key + for the AFI-SAFI list"; + } + + container config { + description + "Configuration parameters for the AFI-SAFI"; + uses bgp-common-mp-afi-safi-config; + } + container state { + config false; + description + "State information relating to the AFI-SAFI"; + uses bgp-common-mp-afi-safi-config; + uses bgp-neighbor-afi-safi-state; + } + + + container graceful-restart { + description + "Parameters relating to BGP graceful-restart"; + container config { + description + "Configuration options for BGP graceful-restart"; + uses bgp-common-mp-afi-safi-graceful-restart-config; + } + container state { + config false; + description + "State information for BGP graceful-restart"; + uses bgp-common-mp-afi-safi-graceful-restart-config; + uses bgp-neighbor-afi-safi-graceful-restart-state; + } + } + + uses bgp-common-structure-neighbor-group-add-paths; + uses bgp-common-mp-all-afi-safi-list-contents; + uses bgp-neighbor-use-multiple-paths; + } + } + + grouping bgp-neighbor-base { + description + "Parameters related to a BGP neighbor"; + + container config { + description + "Configuration parameters relating to the BGP neighbor or + group"; + uses bgp-neighbor-config; + uses bgp-common-neighbor-group-config; + } + container state { + config false; + description + "State information relating to the BGP neighbor"; + uses bgp-neighbor-config; + uses bgp-common-neighbor-group-config; + uses bgp-neighbor-state; + } + + container timers { + description + "Timers related to a BGP neighbor"; + container config { + description + "Configuration parameters relating to timers used for the + BGP neighbor"; + uses bgp-common-neighbor-group-timers-config; + } + container state { + config false; + description + "State information relating to the timers used for the BGP + neighbor"; + uses bgp-common-neighbor-group-timers-config; + uses bgp-neighbor-timers-state; + } + } + + container transport { + description + "Transport session parameters for the BGP neighbor"; + container config { + description + "Configuration parameters relating to the transport + session(s) used for the BGP neighbor"; + uses bgp-common-neighbor-group-transport-config; + } + container state { + config false; + description + "State information relating to the transport session(s) + used for the BGP neighbor"; + uses bgp-common-neighbor-group-transport-config; + uses bgp-neighbor-transport-state; + } + } + + container error-handling { + description + "Error handling parameters used for the BGP neighbor or + group"; + container config { + description + "Configuration parameters enabling or modifying the + behavior or enhanced error handling mechanisms for the BGP + neighbor"; + uses bgp-common-neighbor-group-error-handling-config; + } + container state { + config false; + description + "State information relating to enhanced error handling + mechanisms for the BGP neighbor"; + uses bgp-common-neighbor-group-error-handling-config; + uses bgp-neighbor-error-handling-state; + } + } + + container graceful-restart { + description + "Parameters relating the graceful restart mechanism for BGP"; + container config { + description + "Configuration parameters relating to graceful-restart"; + uses bgp-common-graceful-restart-config; + } + container state { + config false; + description + "State information associated with graceful-restart"; + uses bgp-common-graceful-restart-config; + uses bgp-neighbor-graceful-restart-state; + } + } + + uses bgp-common-structure-neighbor-group-logging-options; + uses bgp-common-structure-neighbor-group-ebgp-multihop; + uses bgp-common-structure-neighbor-group-route-reflector; + uses bgp-common-structure-neighbor-group-as-path-options; + uses bgp-neighbor-use-multiple-paths; + uses oc-rpol:apply-policy-group; + + container afi-safis { + description + "Per-address-family configuration parameters associated with + the neighbor"; + uses bgp-neighbor-afi-safi-list; + } + } + + grouping bgp-neighbor-list { + description + "The list of BGP neighbors"; + + list neighbor { + key "neighbor-address"; + description + "List of BGP neighbors configured on the local system, + uniquely identified by peer IPv[46] address"; + + leaf neighbor-address { + type leafref { + path "../config/neighbor-address"; + } + description + "Reference to the address of the BGP neighbor used as + a key in the neighbor list"; + } + + uses bgp-neighbor-base; + } + + } + + +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-peer-group.yang b/src/plugins/yang/openconfig/openconfig-bgp-peer-group.yang new file mode 100644 index 0000000..b1ba986 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-peer-group.yang @@ -0,0 +1,271 @@ +submodule openconfig-bgp-peer-group { + + belongs-to openconfig-bgp { + prefix "oc-bgp"; + } + + import openconfig-extensions { prefix oc-ext; } + import openconfig-routing-policy { prefix oc-rpol; } + + // Include the common submodule + include openconfig-bgp-common; + include openconfig-bgp-common-multiprotocol; + include openconfig-bgp-common-structure; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This sub-module contains groupings that are specific to the + peer-group context of the OpenConfig BGP module."; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + grouping bgp-peer-group-config { + description + "Configuration parameters relating to a base BGP peer group that + are not also applicable to any other context (e.g., neighbor)"; + + leaf peer-group-name { + type string; + description + "Name of the BGP peer-group"; + } + + } + + grouping bgp-peer-group-afi-safi-list { + description + "List of address-families associated with the BGP peer-group"; + + list afi-safi { + key "afi-safi-name"; + + description + "AFI,SAFI configuration available for the + neighbour or group"; + + leaf afi-safi-name { + type leafref { + path "../config/afi-safi-name"; + } + description + "Reference to the AFI-SAFI name used as a key + for the AFI-SAFI list"; + } + + container config { + description + "Configuration parameters for the AFI-SAFI"; + uses bgp-common-mp-afi-safi-config; + } + container state { + config false; + description + "State information relating to the AFI-SAFI"; + uses bgp-common-mp-afi-safi-config; + } + + container graceful-restart { + description + "Parameters relating to BGP graceful-restart"; + container config { + description + "Configuration options for BGP graceful-restart"; + uses bgp-common-mp-afi-safi-graceful-restart-config; + } + container state { + config false; + description + "State information for BGP graceful-restart"; + uses bgp-common-mp-afi-safi-graceful-restart-config; + } + } + + uses bgp-common-structure-neighbor-group-add-paths; + uses bgp-common-global-group-use-multiple-paths; + uses bgp-common-mp-all-afi-safi-list-contents; + } + } + + grouping bgp-peer-group-base { + description + "Parameters related to a BGP group"; + + container config { + description + "Configuration parameters relating to the BGP neighbor or + group"; + uses bgp-peer-group-config; + uses bgp-common-neighbor-group-config; + } + container state { + config false; + description + "State information relating to the BGP peer-group"; + uses bgp-peer-group-config; + uses bgp-common-neighbor-group-config; + uses bgp-common-state; + } + + container timers { + description + "Timers related to a BGP peer-group"; + + container config { + description + "Configuration parameters relating to timers used for the + BGP neighbor or peer group"; + uses bgp-common-neighbor-group-timers-config; + } + container state { + config false; + description + "State information relating to the timers used for the BGP + group"; + uses bgp-common-neighbor-group-timers-config; + } + } + + container transport { + description + "Transport session parameters for the BGP peer-group"; + + container config { + description + "Configuration parameters relating to the transport + session(s) used for the BGP neighbor or group"; + uses bgp-common-neighbor-group-transport-config; + } + container state { + config false; + description + "State information relating to the transport session(s) + used for the BGP neighbor or group"; + uses bgp-common-neighbor-group-transport-config; + } + } + + container error-handling { + description + "Error handling parameters used for the BGP peer-group"; + + container config { + description + "Configuration parameters enabling or modifying the + behavior or enhanced error handling mechanisms for the BGP + group"; + uses bgp-common-neighbor-group-error-handling-config; + } + container state { + config false; + description + "State information relating to enhanced error handling + mechanisms for the BGP group"; + uses bgp-common-neighbor-group-error-handling-config; + } + } + + container graceful-restart { + description + "Parameters relating the graceful restart mechanism for BGP"; + container config { + description + "Configuration parameters relating to graceful-restart"; + uses bgp-common-graceful-restart-config; + } + container state { + config false; + description + "State information associated with graceful-restart"; + uses bgp-common-graceful-restart-config; + } + } + + uses bgp-common-structure-neighbor-group-logging-options; + uses bgp-common-structure-neighbor-group-ebgp-multihop; + uses bgp-common-structure-neighbor-group-route-reflector; + uses bgp-common-structure-neighbor-group-as-path-options; + uses bgp-common-global-group-use-multiple-paths; + uses oc-rpol:apply-policy-group; + + container afi-safis { + description + "Per-address-family configuration parameters associated with + thegroup"; + uses bgp-peer-group-afi-safi-list; + } + } + + grouping bgp-peer-group-list { + description + "The list of BGP peer groups"; + + list peer-group { + key "peer-group-name"; + description + "List of BGP peer-groups configured on the local system - + uniquely identified by peer-group name"; + + leaf peer-group-name { + type leafref { + path "../config/peer-group-name"; + } + description + "Reference to the name of the BGP peer-group used as a + key in the peer-group list"; + } + + uses bgp-peer-group-base; + } + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-policy.yang b/src/plugins/yang/openconfig/openconfig-bgp-policy.yang new file mode 100644 index 0000000..23db9f7 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-policy.yang @@ -0,0 +1,1210 @@ +module openconfig-bgp-policy { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/bgp-policy"; + + prefix "oc-bgp-pol"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-routing-policy {prefix oc-rpol; } + import openconfig-policy-types { prefix oc-pol-types; } + import openconfig-bgp-types { prefix oc-bgp-types; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module contains data definitions for BGP routing policy. + It augments the base routing-policy module with BGP-specific + options for conditions and actions."; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + + // typedef statements + + typedef bgp-set-community-option-type { + type enumeration { + enum ADD { + description + "add the specified communities to the existing + community attribute"; + } + enum REMOVE { + description + "remove the specified communities from the + existing community attribute"; + } + enum REPLACE { + description + "replace the existing community attribute with + the specified communities. If an empty set is + specified, this removes the community attribute + from the route."; + } + } + description + "Type definition for options when setting the community + attribute in a policy action"; + } + + typedef bgp-next-hop-type { + type union { + type oc-inet:ip-address; + type enumeration { + enum SELF { + description "special designation for local router's own + address, i.e., next-hop-self"; + } + } + } + description + "type definition for specifying next-hop in policy actions"; + } + + typedef bgp-set-med-type { + type union { + type uint32; + type string { + pattern '^[+-][0-9]+$'; + } + type enumeration { + enum IGP { + description "set the MED value to the IGP cost toward the + next hop for the route"; + } + } + } + description + "Type definition for specifying how the BGP MED can + be set in BGP policy actions. The three choices are to set + the MED directly, increment/decrement using +/- notation, + and setting it to the IGP cost (predefined value)."; + } + + // grouping statements + + grouping match-community-config { + description + "Configuration data for match conditions on communities"; + + leaf community-set { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:defined-sets/" + + "oc-bgp-pol:bgp-defined-sets/oc-bgp-pol:community-sets/" + + "oc-bgp-pol:community-set/oc-bgp-pol:community-set-name"; + } + description + "References a defined community set"; + } + + uses oc-rpol:match-set-options-group; + } + + grouping match-community-state { + description + "Operational state data for match conditions on communities"; + } + + grouping match-community-top { + description + "Top-level grouping for match conditions on communities"; + + container match-community-set { + description + "Top-level container for match conditions on communities. + Match a referenced community-set according to the logic + defined in the match-set-options leaf"; + + container config { + description + "Configuration data for match conditions on communities"; + + uses match-community-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses match-community-config; + uses match-community-state; + } + } + } + + grouping match-ext-community-config { + description + "Configuration data for match conditions on extended + communities"; + + leaf ext-community-set { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:defined-sets/" + + "oc-bgp-pol:bgp-defined-sets/oc-bgp-pol:ext-community-sets/" + + "oc-bgp-pol:ext-community-set/" + + "oc-bgp-pol:ext-community-set-name"; + } + description "References a defined extended community set"; + } + + uses oc-rpol:match-set-options-group; + } + + grouping match-ext-community-state { + description + "Operational state data for match conditions on extended + communities"; + } + + grouping match-ext-community-top { + description + "Top-level grouping for match conditions on extended + communities"; + + container match-ext-community-set { + description + "Match a referenced extended community-set according to the + logic defined in the match-set-options leaf"; + + container config { + description + "Configuration data for match conditions on extended + communities"; + + uses match-ext-community-config; + } + + container state { + + config false; + + description + "Operational state data for match conditions on extended + communities"; + + uses match-ext-community-config; + uses match-ext-community-state; + } + } + } + + grouping match-as-path-config { + description + "Configuration data for match conditions on AS path set"; + + leaf as-path-set { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:defined-sets/" + + "oc-bgp-pol:bgp-defined-sets/oc-bgp-pol:as-path-sets/" + + "oc-bgp-pol:as-path-set/oc-bgp-pol:as-path-set-name"; + } + description "References a defined AS path set"; + } + uses oc-rpol:match-set-options-group; + } + + grouping match-as-path-state { + description + "Operational state data for match conditions on AS path set"; + } + + grouping match-as-path-top { + description + "Top-level grouping for match conditions on AS path set"; + + container match-as-path-set { + description + "Match a referenced as-path set according to the logic + defined in the match-set-options leaf"; + + container config { + description + "Configuration data for match conditions on AS path set"; + + uses match-as-path-config; + } + + container state { + + config false; + + description + "Operational state data for match conditions on AS + path set"; + + uses match-as-path-config; + uses match-as-path-state; + } + } + } + + grouping bgp-match-set-conditions { + description + "Condition statement definitions for checking membership in a + defined set"; + + uses match-community-top; + uses match-ext-community-top; + uses match-as-path-top; + } + + grouping community-count-config { + description + "Configuration data for community count condition"; + + uses oc-pol-types:attribute-compare-operators; + } + + grouping community-count-state { + description + "Operational state data for community count condition"; + } + + grouping community-count-top { + description + "Top-level grouping for community count condition"; + + container community-count { + description + "Value and comparison operations for conditions based on the + number of communities in the route update"; + + container config { + description + "Configuration data for community count condition"; + + uses community-count-config; + } + + container state { + + config false; + + description + "Operational state data for community count condition"; + + uses community-count-config; + uses community-count-state; + } + } + } + + grouping as-path-length-config { + description + "Configuration data for AS path length condition"; + + uses oc-pol-types:attribute-compare-operators; + } + + grouping as-path-length-state { + description + "Operational state data for AS path length condition"; + } + + grouping as-path-length-top { + description + "Top-level grouping for AS path length condition"; + + container as-path-length { + description + "Value and comparison operations for conditions based on the + length of the AS path in the route update"; + + container config { + description + "Configuration data for AS path length condition"; + + uses as-path-length-config; + } + + container state { + + config false; + + description + "Operational state data for AS path length condition"; + + uses as-path-length-config; + uses as-path-length-state; + } + } + } + + grouping bgp-conditions-config { + description + "Configuration data for BGP-specific policy conditions"; + + leaf med-eq { + type uint32; + description + "Condition to check if the received MED value is equal to + the specified value"; + } + + leaf origin-eq { + type oc-bgp-types:bgp-origin-attr-type; + description + "Condition to check if the route origin is equal to the + specified value"; + } + + leaf-list next-hop-in { + type oc-inet:ip-address; + description + "List of next hop addresses to check for in the route + update"; + } + + leaf-list afi-safi-in { + type identityref { + base oc-bgp-types:AFI_SAFI_TYPE; + } + description + "List of address families which the NLRI may be + within"; + } + + leaf local-pref-eq { + type uint32; + // TODO: add support for other comparisons if needed + description + "Condition to check if the local pref attribute is equal to + the specified value"; + } + + leaf route-type { + // TODO: verify extent of vendor support for this comparison + type enumeration { + enum INTERNAL { + description "route type is internal"; + } + enum EXTERNAL { + description "route type is external"; + } + } + description + "Condition to check the route type in the route update"; + } + } + + grouping bgp-conditions-state { + description + "Operational state data for BGP-specific policy conditions"; + } + + grouping bgp-conditions-top { + description + "Top-level grouping for BGP-specific policy conditions"; + + container bgp-conditions { + description + "Top-level container "; + + container config { + description + "Configuration data for BGP-specific policy conditions"; + + uses bgp-conditions-config; + } + + container state { + + config false; + + description + "Operational state data for BGP-specific policy + conditions"; + + uses bgp-conditions-config; + uses bgp-conditions-state; + } + + uses community-count-top; + uses as-path-length-top; + uses bgp-match-set-conditions; + } + } + + grouping community-set-config { + description + "Configuration data for BGP community sets"; + + leaf community-set-name { + type string; + mandatory true; + description + "name / label of the community set -- this is used to + reference the set in match conditions"; + } + + leaf-list community-member { + type union { + type oc-bgp-types:bgp-std-community-type; + type oc-bgp-types:bgp-community-regexp-type; + type oc-bgp-types:bgp-well-known-community-type; + } + description + "members of the community set"; + } + } + + grouping community-set-state { + description + "Operational state data for BGP community sets"; + } + + grouping community-set-top { + description + "Top-level grouping for BGP community sets"; + + container community-sets { + description + "Enclosing container for list of defined BGP community sets"; + + list community-set { + key "community-set-name"; + description + "List of defined BGP community sets"; + + leaf community-set-name { + type leafref { + path "../config/community-set-name"; + } + description + "Reference to list key"; + } + + container config { + description + "Configuration data for BGP community sets"; + + uses community-set-config; + } + + container state { + + config false; + + description + "Operational state data for BGP community sets"; + + uses community-set-config; + uses community-set-state; + } + } + } + } + + grouping ext-community-set-config { + description + "Configuration data for extended BGP community sets"; + + leaf ext-community-set-name { + type string; + description + "name / label of the extended community set -- this is + used to reference the set in match conditions"; + } + + leaf-list ext-community-member { + type union { + type oc-bgp-types:bgp-ext-community-type; + type oc-bgp-types:bgp-community-regexp-type; + } + description + "members of the extended community set"; + } + } + + grouping ext-community-set-state { + description + "Operational state data for extended BGP community sets"; + } + + grouping ext-community-set-top { + description + "Top-level grouping for extended BGP community sets"; + + container ext-community-sets { + description + "Enclosing container for list of extended BGP community + sets"; + + list ext-community-set { + key "ext-community-set-name"; + description + "List of defined extended BGP community sets"; + + leaf ext-community-set-name { + type leafref { + path "../config/ext-community-set-name"; + } + description + "Reference to list key"; + } + + container config { + description + "Configuration data for extended BGP community sets"; + + uses ext-community-set-config; + } + + container state { + + config false; + + description + "Operational state data for extended BGP community sets"; + + uses ext-community-set-config; + uses ext-community-set-state; + } + } + } + } + + grouping as-path-set-config { + description + "Configuration data for AS path sets"; + + leaf as-path-set-name { + type string; + description + "name of the AS path set -- this is used to reference + the set in match conditions"; + } + + leaf-list as-path-set-member { + // TODO: need to refine typedef for AS path expressions + type string; + description + "AS path expression -- list of ASes in the set"; + } + } + + grouping as-path-set-state { + description + "Operational state data for AS path sets"; + } + + grouping as-path-set-top { + description + "Top-level grouping for AS path sets"; + + container as-path-sets { + description + "Enclosing container for list of define AS path sets"; + + list as-path-set { + key "as-path-set-name"; + description + "List of defined AS path sets"; + + leaf as-path-set-name { + type leafref { + path "../config/as-path-set-name"; + } + description + "Reference to list key"; + } + + container config { + description + "Configuration data for AS path sets"; + + uses as-path-set-config; + } + + container state { + + config false; + + description + "Operational state data for AS path sets"; + + uses as-path-set-config; + uses as-path-set-state; + } + } + } + } + + // augment statements + + augment "/oc-rpol:routing-policy/oc-rpol:defined-sets" { + description "adds BGP defined sets container to routing policy + model"; + + container bgp-defined-sets { + description + "BGP-related set definitions for policy match conditions"; + + uses community-set-top; + uses ext-community-set-top; + uses as-path-set-top; + } + } + + grouping as-path-prepend-config { + description + "Configuration data for the AS path prepend action"; + + leaf repeat-n { + type uint8 { + range 1..max; + } + description + "Number of times to prepend the value specified in the asn + leaf to the AS path. If no value is specified by the asn + leaf, the local AS number of the system is used. The value + should be between 1 and the maximum supported by the + implementation."; + } + + leaf asn { + type oc-inet:as-number; + description + "The AS number to prepend to the AS path. If this leaf is + not specified and repeat-n is set, then the local AS + number will be used for prepending."; + } + } + + grouping as-path-prepend-state { + description + "Operational state data for the AS path prepend action"; + } + + grouping as-path-prepend-top { + description + "Top-level grouping for the AS path prepend action"; + + container set-as-path-prepend { + description + "Action to prepend the specified AS number to the AS-path a + specified number of times"; + + container config { + description + "Configuration data for the AS path prepend action"; + + uses as-path-prepend-config; + } + + container state { + + config false; + + description + "Operational state data for the AS path prepend action"; + + uses as-path-prepend-config; + uses as-path-prepend-state; + } + } + } + + grouping set-community-action-common { + description + "Common leaves for set-community and set-ext-community + actions"; + + leaf method { + type enumeration { + enum INLINE { + description + "The extended communities are specified inline as a + list"; + } + enum REFERENCE { + description + "The extended communities are specified by referencing a + defined ext-community set"; + } + } + description + "Indicates the method used to specify the extended + communities for the set-ext-community action"; + } + + leaf options { + type bgp-set-community-option-type; + description + "Options for modifying the community attribute with + the specified values. These options apply to both + methods of setting the community attribute."; + } + } + + grouping set-community-inline-config { + description + "Configuration data for inline specification of set-community + action"; + + leaf-list communities { + type union { + type oc-bgp-types:bgp-std-community-type; + type oc-bgp-types:bgp-well-known-community-type; + } + description + "Set the community values for the update inline with + a list."; + } + } + + grouping set-community-inline-state { + description + "Operational state data or inline specification of + set-community action"; + } + + grouping set-community-inline-top { + description + "Top-level grouping or inline specification of set-community + action"; + + container inline { + when "../config/method=INLINE" { + description + "Active only when the set-community method is INLINE"; + } + description + "Set the community values for the action inline with + a list."; + + container config { + description + "Configuration data or inline specification of set-community + action"; + + uses set-community-inline-config; + } + + container state { + + config false; + + description + "Operational state data or inline specification of + set-community action"; + + uses set-community-inline-config; + uses set-community-inline-state; + } + } + } + + grouping set-community-reference-config { + description + "Configuration data for referening a community-set in the + set-community action"; + + leaf community-set-ref { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:defined-sets/" + + "oc-bgp-pol:bgp-defined-sets/" + + "oc-bgp-pol:community-sets/oc-bgp-pol:community-set/" + + "oc-bgp-pol:community-set-name"; + } + description + "References a defined community set by name"; + } + } + + grouping set-community-reference-state { + description + "Operational state data for referening a community-set in the + set-community action"; + } + + grouping set-community-reference-top { + description + "Top-level grouping for referening a community-set in the + set-community action"; + + container reference { + when "../config/method=REFERENCE" { + description + "Active only when the set-community method is REFERENCE"; + } + description + "Provide a reference to a defined community set for the + set-community action"; + + container config { + description + "Configuration data for referening a community-set in the + set-community action"; + + uses set-community-reference-config; + } + + container state { + + config false; + + description + "Operational state data for referening a community-set + in the set-community action"; + + uses set-community-reference-config; + uses set-community-reference-state; + } + } + } + + grouping set-community-action-config { + description + "Configuration data for the set-community action"; + + uses set-community-action-common; + } + + grouping set-community-action-state { + description + "Operational state data for the set-community action"; + } + + grouping set-community-action-top { + description + "Top-level grouping for the set-community action"; + + container set-community { + description + "Action to set the community attributes of the route, along + with options to modify how the community is modified. + Communities may be set using an inline list OR + reference to an existing defined set (not both)."; + + container config { + description + "Configuration data for the set-community action"; + + uses set-community-action-config; + } + + container state { + + config false; + + description + "Operational state data for the set-community action"; + + uses set-community-action-config; + uses set-community-action-state; + } + + uses set-community-inline-top; + uses set-community-reference-top; + } + } + + grouping set-ext-community-inline-config { + description + "Configuration data for inline specification of + set-ext-community action"; + + leaf-list communities { + type union { + type oc-bgp-types:bgp-ext-community-type; + type oc-bgp-types:bgp-well-known-community-type; + } + description + "Set the extended community values for the update inline + with a list."; + } + } + + grouping set-ext-community-inline-state { + description + "Operational state data or inline specification of + set-ext-community action"; + } + + grouping set-ext-community-inline-top { + description + "Top-level grouping or inline specification of set-ext-community + action"; + + container inline { + when "../config/method=INLINE" { + description + "Active only when the set-community method is INLINE"; + } + description + "Set the extended community values for the action inline with + a list."; + + container config { + description + "Configuration data or inline specification of + set-ext-community action"; + + uses set-ext-community-inline-config; + } + + container state { + + config false; + + description + "Operational state data or inline specification of + set-ext-community action"; + + uses set-ext-community-inline-config; + uses set-ext-community-inline-state; + } + } + } + + grouping set-ext-community-reference-config { + description + "Configuration data for referening a extended community-set + in the set-ext-community action"; + + leaf ext-community-set-ref { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:defined-sets/" + + "oc-bgp-pol:bgp-defined-sets/" + + "oc-bgp-pol:ext-community-sets/" + + "oc-bgp-pol:ext-community-set/" + + "oc-bgp-pol:ext-community-set-name"; + } + description + "References a defined extended community set by + name"; + } + } + + grouping set-ext-community-reference-state { + description + "Operational state data for referening an extended + community-set in the set-ext-community action"; + } + + grouping set-ext-community-reference-top { + description + "Top-level grouping for referening an extended community-set + in the set-community action"; + + container reference { + when "../config/method=REFERENCE" { + description + "Active only when the set-community method is REFERENCE"; + } + description + "Provide a reference to an extended community set for the + set-ext-community action"; + + container config { + description + "Configuration data for referening an extended + community-set in the set-ext-community action"; + + uses set-ext-community-reference-config; + } + + container state { + + config false; + + description + "Operational state data for referening an extended + community-set in the set-ext-community action"; + + uses set-ext-community-reference-config; + uses set-ext-community-reference-state; + } + } + } + + grouping set-ext-community-action-config { + description + "Configuration data for the set-ext-community action"; + + uses set-community-action-common; + } + + grouping set-ext-community-action-state { + description + "Operational state data for the set-ext-community action"; + } + + grouping set-ext-community-action-top { + description + "Top-level grouping for the set-ext-community action"; + + container set-ext-community { + description + "Action to set the extended community attributes of the + route, along with options to modify how the community is + modified. Extended communities may be set using an inline + list OR a reference to an existing defined set (but not + both)."; + + container config { + description + "Configuration data for the set-ext-community action"; + + uses set-ext-community-action-config; + } + + container state { + + config false; + + description + "Operational state data for the set-ext-community action"; + + uses set-ext-community-action-config; + uses set-ext-community-action-state; + } + uses set-ext-community-inline-top; + uses set-ext-community-reference-top; + } + } + + grouping bgp-actions-config { + description + "Configuration data for BGP-specific actions"; + + leaf set-route-origin { + type oc-bgp-types:bgp-origin-attr-type; + description "set the origin attribute to the specified + value"; + } + + leaf set-local-pref { + type uint32; + description "set the local pref attribute on the route + update"; + } + + leaf set-next-hop { + type bgp-next-hop-type; + description "set the next-hop attribute in the route update"; + } + + leaf set-med { + type bgp-set-med-type; + description "set the med metric attribute in the route + update"; + } + } + + grouping bgp-actions-state { + description + "Operational state data for BGP-specific actions"; + } + + grouping bgp-actions-top { + description + "Top-level grouping for BGP-specific actions"; + + container bgp-actions { + description + "Top-level container for BGP-specific actions"; + + container config { + description + "Configuration data for BGP-specific actions"; + + uses bgp-actions-config; + } + + container state { + + config false; + + description + "Operational state data for BGP-specific actions"; + + uses bgp-actions-config; + uses bgp-actions-state; + } + uses as-path-prepend-top; + uses set-community-action-top; + uses set-ext-community-action-top; + } + } + + augment "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:statements/oc-rpol:statement/" + + "oc-rpol:conditions" { + description + "BGP policy conditions added to routing policy module"; + + uses bgp-conditions-top; + } + + augment "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:statements/oc-rpol:statement/" + + "oc-rpol:actions" { + description "BGP policy actions added to routing policy + module"; + + uses bgp-actions-top; + } + + // rpc statements + + // notification statements +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp-types.yang b/src/plugins/yang/openconfig/openconfig-bgp-types.yang new file mode 100644 index 0000000..0b57480 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp-types.yang @@ -0,0 +1,604 @@ +module openconfig-bgp-types { + yang-version "1"; + + namespace "http://openconfig.net/yang/bgp-types"; + + prefix "oc-bgp-types"; + + import openconfig-types { prefix "oc-types"; } + import openconfig-inet-types { prefix "oc-inet"; } + import openconfig-extensions { prefix "oc-ext"; } + + // Include definitions of BGP error notifications + include openconfig-bgp-errors; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module contains general data definitions for use in BGP + policy. It can be imported by modules that make use of BGP + attributes"; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2018-03-20" { + description + "Added color extended community"; + reference "4.0.2"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + + identity BGP_CAPABILITY { + description "Base identity for a BGP capability"; + } + + identity MPBGP { + base BGP_CAPABILITY; + description + "Multi-protocol extensions to BGP"; + reference "RFC2858"; + } + + identity ROUTE_REFRESH { + base BGP_CAPABILITY; + description + "The BGP route-refresh functionality"; + reference "RFC2918"; + } + + identity ASN32 { + base BGP_CAPABILITY; + description + "4-byte (32-bit) AS number functionality"; + reference "RFC6793"; + } + + identity GRACEFUL_RESTART { + base BGP_CAPABILITY; + description + "Graceful restart functionality"; + reference "RFC4724"; + } + + identity ADD_PATHS { + base BGP_CAPABILITY; + description + "BGP add-paths"; + reference "draft-ietf-idr-add-paths"; + } + + identity AFI_SAFI_TYPE { + description + "Base identity type for AFI,SAFI tuples for BGP-4"; + reference "RFC4760 - multiprotocol extensions for BGP-4"; + } + + identity IPV4_UNICAST { + base AFI_SAFI_TYPE; + description + "IPv4 unicast (AFI,SAFI = 1,1)"; + reference "RFC4760"; + } + + identity IPV6_UNICAST { + base AFI_SAFI_TYPE; + description + "IPv6 unicast (AFI,SAFI = 2,1)"; + reference "RFC4760"; + } + + identity IPV4_LABELED_UNICAST { + base AFI_SAFI_TYPE; + description + "Labeled IPv4 unicast (AFI,SAFI = 1,4)"; + reference "RFC3107"; + } + + identity IPV6_LABELED_UNICAST { + base AFI_SAFI_TYPE; + description + "Labeled IPv6 unicast (AFI,SAFI = 2,4)"; + reference "RFC3107"; + } + + identity L3VPN_IPV4_UNICAST { + base AFI_SAFI_TYPE; + description + "Unicast IPv4 MPLS L3VPN (AFI,SAFI = 1,128)"; + reference "RFC4364"; + } + + identity L3VPN_IPV6_UNICAST { + base AFI_SAFI_TYPE; + description + "Unicast IPv6 MPLS L3VPN (AFI,SAFI = 2,128)"; + reference "RFC4659"; + } + + identity L3VPN_IPV4_MULTICAST { + base AFI_SAFI_TYPE; + description + "Multicast IPv4 MPLS L3VPN (AFI,SAFI = 1,129)"; + reference "RFC6514"; + } + + identity L3VPN_IPV6_MULTICAST { + base AFI_SAFI_TYPE; + description + "Multicast IPv6 MPLS L3VPN (AFI,SAFI = 2,129)"; + reference "RFC6514"; + } + + identity L2VPN_VPLS { + base AFI_SAFI_TYPE; + description + "BGP-signalled VPLS (AFI,SAFI = 25,65)"; + reference "RFC4761"; + } + + identity L2VPN_EVPN { + base AFI_SAFI_TYPE; + description + "BGP MPLS Based Ethernet VPN (AFI,SAFI = 25,70)"; + } + + identity SRTE_POLICY_IPV4 { + base AFI_SAFI_TYPE; + description + "Segment Routing Traffic Engineering (SRTE) Policy + for IPv4 (AFI,SAFI = 1,73)"; + } + + identity SRTE_POLICY_IPV6 { + base AFI_SAFI_TYPE; + description + "Segment Routing Traffic Engineering (SRTE) Policy + for IPv6 (AFI,SAFI = 2,73)"; + } + + identity BGP_WELL_KNOWN_STD_COMMUNITY { + description + "Reserved communities within the standard community space + defined by RFC1997. These communities must fall within the + range 0x00000000 to 0xFFFFFFFF"; + reference "RFC1997"; + } + + identity NO_EXPORT { + base BGP_WELL_KNOWN_STD_COMMUNITY; + description + "Do not export NLRI received carrying this community outside + the bounds of this autonomous system, or this confederation if + the local autonomous system is a confederation member AS. This + community has a value of 0xFFFFFF01."; + reference "RFC1997"; + } + + identity NO_ADVERTISE { + base BGP_WELL_KNOWN_STD_COMMUNITY; + description + "All NLRI received carrying this community must not be + advertised to other BGP peers. This community has a value of + 0xFFFFFF02."; + reference "RFC1997"; + } + + identity NO_EXPORT_SUBCONFED { + base BGP_WELL_KNOWN_STD_COMMUNITY; + description + "All NLRI received carrying this community must not be + advertised to external BGP peers - including over confederation + sub-AS boundaries. This community has a value of 0xFFFFFF03."; + reference "RFC1997"; + } + + identity NOPEER { + base BGP_WELL_KNOWN_STD_COMMUNITY; + description + "An autonomous system receiving NLRI tagged with this community + is advised not to readvertise the NLRI to external bi-lateral + peer autonomous systems. An AS may also filter received NLRI + from bilateral peer sessions when they are tagged with this + community value"; + reference "RFC3765"; + } + + typedef bgp-session-direction { + type enumeration { + enum INBOUND { + description + "Refers to all NLRI received from the BGP peer"; + } + enum OUTBOUND { + description + "Refers to all NLRI advertised to the BGP peer"; + } + } + description + "Type to describe the direction of NLRI transmission"; + } + + typedef bgp-well-known-community-type { + type identityref { + base BGP_WELL_KNOWN_STD_COMMUNITY; + } + description + "Type definition for well-known IETF community attribute + values"; + reference + "IANA Border Gateway Protocol (BGP) Well Known Communities"; + } + + + typedef bgp-std-community-type { + // TODO: further refine restrictions and allowed patterns + // 4-octet value: + // 2 octets + // 2 octets + type union { + type uint32 { + // per RFC 1997, 0x00000000 - 0x0000FFFF and 0xFFFF0000 - + // 0xFFFFFFFF are reserved + } + type string { + pattern '^(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + } + description + "Type definition for standard commmunity attributes represented as + a integer value, or a string of the form N:M where N and M are + integers between 0 and 65535."; + reference "RFC 1997 - BGP Communities Attribute"; + } + + typedef bgp-ext-community-type { + type union { + type string { + // Type 1: 2-octet global and 4-octet local + // (AS number) (Integer) + pattern '^(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9]):' + + '(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9])$'; + } + type string { + // Type 2: 4-octet global and 2-octet local + // (ipv4-address) (integer) + pattern '^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|' + + '25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|' + + '2[0-4][0-9]|25[0-5]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + type string { + // RFC5668: 4-octet global and 2-octet local + // (AS number) (integer) + pattern '^(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + type string { + // route-target with Type 1 + // route-target:(ASN):(local-part) + pattern '^route\-target:' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9]):' + + '(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9])$'; + } + type string { + // route-target with Type 2 + // route-target:(IPv4):(local-part) + pattern '^route\-target:' + + '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|' + + '25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|' + + '2[0-4][0-9]|25[0-5]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + type string { + // 4-byte AS Type 1 route-target + pattern '^route\-target:' + + '(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + type string { + // route-origin with Type 1 + pattern '^route\-origin:' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9]):' + + '(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9])$'; + } + type string { + // route-origin with Type 2 + pattern '^route\-origin:' + + '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|' + + '25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|' + + '2[0-4][0-9]|25[0-5]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + type string { + // 4-byte AS Type 1 route-origin + pattern '^route\-origin:' + + '(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9]):' + + '(6553[0-5]|655[0-2][0-9]|654[0-9]{2}|65[0-4][0-9]{2}' + + '|6[0-4][0-9]{3}|[1-5][0-9]{4}|[1-9][0-9]{1,3}|[0-9])$'; + } + type string { + // Extended Color Community + pattern '^color:' + + '[0-1]{2}:' + + '(429496729[0-5]|42949672[0-8][0-9]|4294967[0-1][0-9]{2}' + + '|429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|4294[0-8][0-9]{5}|' + + '429[0-3][0-9]{6}|4[0-1][0-9]{7}|[1-3][0-9]{9}|' + + '[1-9][0-9]{1,8}|[0-9])$'; + } + } + description + "Type definition for extended community attributes. In the case that + common communities are utilised, they are represented as a string + of the form: + - <2b AS>:<4b value> per RFC4360 section 3.1 + - <4b IPv4>:<2b value> per RFC4360 section 3.2 + - <4b AS>:<2b value> per RFC5668 section 2. + - route-target:<2b AS>:<4b value> per RFC4360 section 4 + - route-target:<4b IPv4>:<2b value> per RFC4360 section 4 + - route-origin:<2b ASN>:<4b value> per RFC4360 section 5 + - route-origin:<4b IPv4>:<2b value> per RFC4360 section 5 + - color::<4b value> per draft-ietf-idr-segment-routing-te-policy + section 3"; + reference + "RFC 4360 - BGP Extended Communities Attribute + RFC 5668 - 4-Octet AS Specific BGP Extended Community + draft-ietf-idr-segment-routing-te-policy"; + } + + typedef bgp-ext-community-recv-type { + type union { + type bgp-ext-community-type; + type binary { + length 8; + } + } + description + "A type definition utilised to define the extended community + in a context where the system is receiving the extended + community from an external source, such that the value may be + unknown. In the case that the received extended community is + unknown it is defined to be a 8-octet quantity formatted + according to RFC4360: + + Type Field: 1 or 2 octets. + Value Field: Remaining octets. + + The high-order octet of the type field is encoded such that + bit 0 indicates whether the extended community type is IANA + assigned; and bit 1 indicates whether the extended community + is transitive. The remaining bits of the high-order type + field must be interpreted to determine whether the low-order + type field should be parsed, or whether the entire remainder + of the extended community is a value."; + reference + "RFC 4360 - BGP Extended Communities Attribute + RFC 5668 - 4-Octet AS Specific BGP Extended Community"; + } + + typedef bgp-community-regexp-type { + // TODO: needs more work to decide what format these regexps can + // take. + type oc-types:std-regexp; + description + "Type definition for communities specified as regular + expression patterns"; + } + + typedef bgp-origin-attr-type { + type enumeration { + enum IGP { + description + "Origin of the NLRI is internal"; + } + enum EGP { + description + "Origin of the NLRI is EGP"; + } + enum INCOMPLETE { + description + "Origin of the NLRI is neither IGP or EGP"; + } + } + description + "Type definition for standard BGP origin attribute"; + reference "RFC 4271 - A Border Gateway Protocol 4 (BGP-4), + Sec 4.3"; + } + + typedef peer-type { + type enumeration { + enum INTERNAL { + description + "Internal (iBGP) peer"; + } + enum EXTERNAL { + description + "External (eBGP) peer"; + } + } + description + "Labels a peer or peer group as explicitly internal or + external"; + } + + identity REMOVE_PRIVATE_AS_OPTION { + description + "Base identity for options for removing private autonomous + system numbers from the AS_PATH attribute"; + } + + identity PRIVATE_AS_REMOVE_ALL { + base REMOVE_PRIVATE_AS_OPTION; + description + "Strip all private autonmous system numbers from the AS_PATH. + This action is performed regardless of the other content of the + AS_PATH attribute, and for all instances of private AS numbers + within that attribute."; + } + + identity PRIVATE_AS_REPLACE_ALL { + base REMOVE_PRIVATE_AS_OPTION; + description + "Replace all instances of private autonomous system numbers in + the AS_PATH with the local BGP speaker's autonomous system + number. This action is performed regardless of the other + content of the AS_PATH attribute, and for all instances of + private AS number within that attribute."; + } + + typedef remove-private-as-option { + type identityref { + base REMOVE_PRIVATE_AS_OPTION; + } + description + "Set of options for configuring how private AS path numbers + are removed from advertisements"; + } + + typedef rr-cluster-id-type { + type union { + type uint32; + type oc-inet:ipv4-address; + } + description + "Union type for route reflector cluster ids: + option 1: 4-byte number + option 2: IP address"; + } + + typedef community-type { + type enumeration { + enum STANDARD { + description "Send only standard communities"; + } + enum EXTENDED { + description "Send only extended communities"; + } + enum BOTH { + description "Send both standard and extended communities"; + } + enum NONE { + description "Do not send any community attribute"; + } + } + description + "type describing variations of community attributes: + STANDARD: standard BGP community [rfc1997] + EXTENDED: extended BGP community [rfc4360] + BOTH: both standard and extended community"; + } + + + typedef as-path-segment-type { + type enumeration { + enum AS_SEQ { + description + "Ordered set of autonomous systems that a route in + the UPDATE message has traversed"; + } + enum AS_SET { + description + "Unordered set of autonomous systems that a route in + the UPDATE message has traversed"; + } + enum AS_CONFED_SEQUENCE { + description + "Ordered set of Member Autonomous + Systems in the local confederation that the UPDATE message + has traversed"; + } + enum AS_CONFED_SET { + description + "Unordered set of Member Autonomous Systems + in the local confederation that the UPDATE message has + traversed"; + } + } + description + "Defines the types of BGP AS path segments."; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-bgp.yang b/src/plugins/yang/openconfig/openconfig-bgp.yang new file mode 100644 index 0000000..9331e9f --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-bgp.yang @@ -0,0 +1,155 @@ +module openconfig-bgp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/bgp"; + + prefix "oc-bgp"; + + // import some basic inet types + import openconfig-extensions { prefix oc-ext; } + + // Include the OpenConfig BGP submodules + // Common: defines the groupings that are common across more than + // one context (where contexts are neighbor, group, global) + include openconfig-bgp-common; + // Multiprotocol: defines the groupings that are common across more + // than one context, and relate to Multiprotocol + include openconfig-bgp-common-multiprotocol; + // Structure: defines groupings that are shared but are solely used for + // structural reasons. + include openconfig-bgp-common-structure; + // Include peer-group/neighbor/global - these define the groupings + // that are specific to one context + include openconfig-bgp-peer-group; + include openconfig-bgp-neighbor; + include openconfig-bgp-global; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module describes a YANG model for BGP protocol + configuration.It is a limited subset of all of the configuration + parameters available in the variety of vendor implementations, + hence it is expected that it would be augmented with vendor- + specific configuration data as needed. Additional modules or + submodules to handle other aspects of BGP configuration, + including policy, VRFs, VPNs, and additional address families + are also expected. + + This model supports the following BGP configuration level + hierarchy: + + BGP + | + +-> [ global BGP configuration ] + +-> AFI / SAFI global + +-> peer group + +-> [ peer group config ] + +-> AFI / SAFI [ per-AFI overrides ] + +-> neighbor + +-> [ neighbor config ] + +-> [ optional pointer to peer-group ] + +-> AFI / SAFI [ per-AFI overrides ]"; + + oc-ext:openconfig-version "5.0.1"; + + revision "2018-08-20" { + description + "Correct description of AFI-SAFI enabled leaf."; + reference "5.0.1"; + } + + revision "2018-04-11" { + description + "Correct naming of BGP maximum prefix warning percentage leaf."; + reference "5.0.0"; + } + + revision "2018-03-20" { + description + "Added SR-TE policy SAFI"; + reference "4.1.0"; + } + + revision "2017-07-30" { + description + "Clarification of add-paths send-max leaf"; + reference "4.0.1"; + } + + revision "2017-07-10" { + description + "Add error notifications; moved add-paths config; add AS + prepend policy features; removed unneeded config leaves"; + reference "4.0.0"; + } + + revision "2017-02-02" { + description + "Bugfix to remove remaining global-level policy data"; + reference "3.0.1"; + } + + revision "2017-01-26" { + description + "Add dynamic neighbor support, migrate to OpenConfig types"; + reference "3.0.0"; + } + + revision "2016-06-21" { + description + "OpenConfig BGP refactor"; + reference "2.1.1"; + } + + revision "2016-06-06" { + description + "OpenConfig public release"; + reference "2.1.0"; + } + + revision "2016-03-31" { + description + "OpenConfig public release"; + reference "2.0.1"; + } + + grouping bgp-top { + description + "Top-level grouping for the BGP model data"; + + container bgp { + description + "Top-level configuration and state for the BGP router"; + + container global { + description + "Global configuration for the BGP router"; + uses bgp-global-base; + } + + container neighbors { + description + "Configuration for BGP neighbors"; + uses bgp-neighbor-list; + } + + container peer-groups { + description + "Configuration for BGP peer-groups"; + uses bgp-peer-group-list; + } + } + } + + uses bgp-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-catalog-types.yang b/src/plugins/yang/openconfig/openconfig-catalog-types.yang new file mode 100644 index 0000000..bdec31e --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-catalog-types.yang @@ -0,0 +1,242 @@ +module openconfig-catalog-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/catalog-types"; + + prefix "oc-cat-types"; + + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types and identities used by the OpenConfig + YANG module catalog model."; + + oc-ext:openconfig-version "0.2.1"; + + revision "2017-05-01" { + description + "Fix to module dependency list"; + reference "0.2.1"; + } + + revision "2017-03-08" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + revision "2016-02-15" { + description + "Initial OpenConfig public release"; + reference "0.1.0"; + } + + + // extension statements + + // feature statements + + // identity statements + + identity CATALOG_MEMBER_TYPE { + description + "Base identity for elements in the catalog"; + } + + identity MODULE { + base CATALOG_MEMBER_TYPE; + description + "Module elements in the catalog"; + } + + identity RELEASE_BUNDLE { + base CATALOG_MEMBER_TYPE; + description + "Release bundle elements in the catalog"; + } + + identity FEATURE_BUNDLE { + base CATALOG_MEMBER_TYPE; + description + "Feature bundle elements in the catalog"; + } + + + identity IMPLEMENTATION_STATUS_TYPE { + description + "Indications of the status of a module's implementation on a + device or server"; + } + + identity IN_PROGRESS { + base IMPLEMENTATION_STATUS_TYPE; + description + "Implementation is in progress"; + } + + identity PLANNED { + base IMPLEMENTATION_STATUS_TYPE; + description + "Implementation is planned"; + } + + identity COMPLETE { + base IMPLEMENTATION_STATUS_TYPE; + description + "Implementation is complete and fully supports the model"; + } + + identity PARTIAL { + base IMPLEMENTATION_STATUS_TYPE; + description + "Implementation is complete, but only supports the model + partially"; + } + + identity MODULE_STATUS_TYPE { + description + "Indicates the deployment status of the module"; + } + + identity EXPERIMENTAL { + base MODULE_STATUS_TYPE; + description + "Module should be considered experimental, not deployed in + production settings"; + } + + identity PRODUCTION { + base MODULE_STATUS_TYPE; + description + "Module is suitable for use in production, or has been + deployed in production"; + } + + identity MODULE_CATEGORY_BASE { + description + "Base identity for the module category. It is expected that + publishing organizations will define additional derived + identities to describe their categorization scheme."; + } + + identity MODULE_SUBCATEGORY_BASE { + description + "Base identity for the module subcategory. It is expected that + publishing organizations will define additional derived + identities to describe their categorization scheme."; + } + + identity ORGANIZATION_TYPE { + description + "Publishing organization type for the set of modules"; + } + + identity STANDARDS { + base ORGANIZATION_TYPE; + description + "Standards development organization (SDO) publisher type"; + } + + identity INDUSTRY { + base ORGANIZATION_TYPE; + description + "Industry forum or other industry group"; + } + + identity COMMERCIAL { + base ORGANIZATION_TYPE; + description + "Commercial entity, company, etc."; + } + + identity INDIVIDUAL { + base ORGANIZATION_TYPE; + description + "For modules published by an individual"; + } + + identity IETF_MODEL_LAYER { + base MODULE_CATEGORY_BASE; + description + "Describes layering of models based on their abstraction + level as defined by IETF model classification proposals"; + reference + "IETF draft-ietf-netmod-yang-model-classification"; + } + + identity IETF_MODEL_TYPE { + base MODULE_SUBCATEGORY_BASE; + description + "IETF proposed classification dimension of YANG model types as + standard YANG models, vendor-specific, or user-specific YANG + models and extensions"; + reference + "IETF draft-ietf-netmod-yang-model-classification"; + } + + identity IETF_NETWORK_SERVICE { + base IETF_MODEL_LAYER; + description + "Service-layer model as defined by IETF classification + proposal"; + } + + identity IETF_NETWORK_ELEMENT { + base IETF_MODEL_LAYER; + description + "Network element-layer model as defined by IETF classification + proposal"; + } + + identity IETF_TYPE_STANDARD { + base IETF_MODEL_TYPE; + description + "Models published by standards-defining organizations (SDOs)"; + } + + identity IETF_TYPE_VENDOR { + base IETF_MODEL_TYPE; + description + "Developed by organizations (e.g., vendors) with the intent + to support a specific set of implementations under control of + that organization"; + } + + identity IETF_TYPE_USER { + base IETF_MODEL_TYPE; + description + "Developed by organizations that operate YANG-based + infrastructure including devices and orchestrators. + The intent of these models is to express the specific needs + for a certain implementation, above and beyond what is provided + by vendors"; + } + + typedef module-version-type { + type string; + description + "This type defines acceptable formats for the version of a + module. The version may be a semantic version, or a YANG + revision statement date, and may include wildcards when + included in a bundle compatibility list, e.g.: + + semver format: .. + examples: 0.1.0, 2.1.0, 1.1.*, 2.*.* + + revision format: YYYY-MM-DD + example: 2016-11-31"; + } + + + +} diff --git a/src/plugins/yang/openconfig/openconfig-channel-monitor.yang b/src/plugins/yang/openconfig/openconfig-channel-monitor.yang new file mode 100644 index 0000000..c898677 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-channel-monitor.yang @@ -0,0 +1,330 @@ +module openconfig-channel-monitor { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/channel-monitor"; + + prefix "oc-chan-monitor"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-platform { prefix oc-platform; } + import openconfig-transport-types { prefix oc-opt-types; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This model describes operational state data for an optical + channel monitor (OCM) for optical transport line system + elements such as wavelength routers (ROADMs) and amplifiers."; + + oc-ext:openconfig-version "0.3.1"; + + revision "2017-09-08" { + description + "Correct bug with OSC interfaces"; + reference "0.3.1"; + } + + revision "2017-07-08" { + description + "Support multiple OCMs, add refs to hw ports, "; + reference "0.3.0"; + } + + revision "2017-03-28" { + description + "Added min/max/avg stats, status for media channels, OCM, APS"; + reference "0.2.0"; + } + + revision "2016-09-14" { + description + "Initial revision"; + reference "0.1.0"; + } + + + + // grouping statements + + grouping media-channel-port-config { + description + "Configuration data for a media channel source/dest port"; + + leaf port-name { + type oc-if:base-interface-ref; + description + "Reference to the corresponding node interface"; + } + } + + grouping media-channel-port-state { + description + "Operational state data for a media channel source/dest port"; + } + + grouping media-channel-source-port-top { + description + "Top-level grouping for source of the media channel"; + + container source { + description + "Top-level container for media channel source"; + + container config { + description + "Configuration data for the media channel source"; + + uses media-channel-port-config; + } + + container state { + + config false; + + description + "Operational state data for the media channel source"; + + uses media-channel-port-config; + uses media-channel-port-state; + } + } + } + + grouping media-channel-dest-port-top { + description + "Top-level grouping for destination of the media channel"; + + container dest { + description + "Top-level container for media channel destination"; + + container config { + description + "Configuration data for the media channel destination"; + + uses media-channel-port-config; + } + + container state { + + config false; + + description + "Operational state data for the media channel destination"; + + uses media-channel-port-config; + uses media-channel-port-state; + } + } + } + + grouping media-channel-psd-state { + description + "Operational state data for the media channel PSD"; + + leaf lower-frequency { + type oc-opt-types:frequency-type; + description + "Lower frequency of the specified PSD"; + } + + leaf upper-frequency { + type oc-opt-types:frequency-type; + description + "Upper frequency of the specified PSD"; + } + + leaf psd { + type oc-types:ieeefloat32; + units "nW/MHz"; + description + "Power spectral density expressed in nanowatts per + megahertz, nW/MHz. These units allow the value to often + be greater than 1.0. It also avoids dealing with zero values + for 0dBm. For example, a 40GHz wide channel + with 0dBm power would be: + 0dBm = 1mW = 10^6nW + 40GHz = 40,000MHz + 0dBm/40GHz = 10^6nW/40,000MHz = 1000/40 = 25"; + } + } + + + grouping media-channel-psd-top { + description + "Top-level grouping "; + + container channels { + description + "Enclosing container for the list of values describing + the power spectral density distribution"; + + list channel { + key "lower-frequency upper-frequency"; + config false; + description + "List of tuples describing the PSD distribution"; + + leaf lower-frequency { + type leafref { + path "../state/lower-frequency"; + } + description + "Reference to the list key"; + } + + leaf upper-frequency { + type leafref { + path "../state/upper-frequency"; + } + description + "Reference to the list key"; + } + + + container state { + + config false; + + description + "Operational state data for PSD"; + + uses media-channel-psd-state; + } + } + } + } + + grouping media-channel-config { + description + "Configuration data for media channel definitions"; + + leaf index { + type uint32; + description + "Identifier for the defined media channel"; + } + + leaf lower-frequency { + type oc-opt-types:frequency-type; + description + "The lower frequency for the spectrum defined by this media + channel"; + } + + leaf upper-frequency { + type oc-opt-types:frequency-type; + description + "The upper frequency for the spectrum defined by this media + channel"; + } + + } + + grouping channel-monitor-config { + description + "Configuration data for the optical channel monitor"; + + leaf name { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to system-supplied name of the port on the + optical channel monitor (OCM). If this port is embedded + in another card (i.e. an amplifier card) the device + should still define a port representing the OCM even if + it is internal and not physically present on the + faceplate of the card"; + } + + leaf monitor-port { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to system-supplied name of the port that the + channel monitor is physically connected to. This port + will be of type MONITOR. This port is a tap off of the + monitored-port and would be in the same card as the + monitored port. If this port is embedded in another card + (i.e. an amplifier card) the device should still define + a port representing the monitor port if it is internal + and not physically present on the faceplate of the card"; + } + } + + grouping channel-monitor-state { + description + "Operational state data "; + } + + grouping channel-monitor-top { + description + "Top-level grouping "; + + container channel-monitors { + description + "Top-level container for optical channel monitors"; + + list channel-monitor { + key "name"; + description + "List of channel monitors, keyed by channel monitor name."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "References the optical channel monitor name"; + } + + container config { + description + "Configuration data "; + + uses channel-monitor-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses channel-monitor-config; + uses channel-monitor-state; + } + + uses media-channel-psd-top; + } + } + } + + // data definition statements + + uses channel-monitor-top; + + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-extensions.yang b/src/plugins/yang/openconfig/openconfig-extensions.yang new file mode 100644 index 0000000..f39ecf6 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-extensions.yang @@ -0,0 +1,91 @@ +module openconfig-extensions { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/openconfig-ext"; + + prefix "oc-ext"; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module provides extensions to the YANG language to allow + OpenConfig specific functionality and meta-data to be defined."; + + revision "2017-04-11" { + description + "rename password type to 'hashed' and clarify description"; + reference "0.3.0"; + } + + revision "2017-01-29" { + description + "Added extension for annotating encrypted values."; + reference "0.2.0"; + } + + revision "2015-10-09" { + description + "Initial OpenConfig public release"; + reference "0.1.0"; + } + + + // extension statements + extension openconfig-version { + argument "semver" { + yin-element false; + } + description + "The OpenConfig version number for the module. This is + expressed as a semantic version number of the form: + x.y.z + where: + * x corresponds to the major version, + * y corresponds to a minor version, + * z corresponds to a patch version. + This version corresponds to the model file within which it is + defined, and does not cover the whole set of OpenConfig models. + Where several modules are used to build up a single block of + functionality, the same module version is specified across each + file that makes up the module. + + A major version number of 0 indicates that this model is still + in development (whether within OpenConfig or with industry + partners), and is potentially subject to change. + + Following a release of major version 1, all modules will + increment major revision number where backwards incompatible + changes to the model are made. + + The minor version is changed when features are added to the + model that do not impact current clients use of the model. + + The patch-level version is incremented when non-feature changes + (such as bugfixes or clarifications to human-readable + descriptions that do not impact model functionality) are made + that maintain backwards compatibility. + + The version number is stored in the module meta-data."; + } + + extension openconfig-hashed-value { + description + "This extension provides an annotation on schema nodes to + indicate that the corresponding value should be stored and + reported in hashed form. + + Hash algorithms are by definition not reversible. Clients + reading the configuration or applied configuration for the node + should expect to receive only the hashed value. Values written + in cleartext will be hashed. This annotation may be used on + nodes such as secure passwords in which the device never reports + a cleartext value, even if the input is provided as cleartext."; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-if-aggregate.yang b/src/plugins/yang/openconfig/openconfig-if-aggregate.yang new file mode 100644 index 0000000..5aa80bb --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-aggregate.yang @@ -0,0 +1,223 @@ +module openconfig-if-aggregate { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/interfaces/aggregate"; + + prefix "oc-lag"; + + // import some basic types + import openconfig-interfaces { prefix oc-if; } + import openconfig-if-ethernet { prefix oc-eth; } + import iana-if-type { prefix ift; } + import openconfig-if-types { prefix oc-ift; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Model for managing aggregated (aka bundle, LAG) interfaces."; + + oc-ext:openconfig-version "2.3.1"; + + revision "2018-03-23" { + description + "Fix/cleanup when statements in aggregates model."; + reference "2.3.1"; + } + + revision "2018-01-05" { + description + "Add logical loopback to interface."; + reference "2.3.0"; + } + + revision "2017-12-22" { + description + "Add IPv4 proxy ARP configuration."; + reference "2.2.0"; + } + + revision "2017-12-21" { + description + "Added IPv6 router advertisement configuration."; + reference "2.1.0"; + } + + revision "2017-07-14" { + description + "Added Ethernet/IP state data; Add dhcp-client; + migrate to OpenConfig types modules; Removed or + renamed opstate values"; + reference "2.0.0"; + } + + revision "2016-12-22" { + description + "Fixes to Ethernet interfaces model"; + reference "1.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + + + typedef aggregation-type { + type enumeration { + enum LACP { + description "LAG managed by LACP"; + } + enum STATIC { + description "Statically configured bundle / LAG"; + } + } + description + "Type to define the lag-type, i.e., how the LAG is + defined and managed"; + } + + // grouping statements + + + grouping aggregation-logical-config { + description + "Configuration data for aggregate interfaces"; + + + leaf lag-type { + type aggregation-type; + description + "Sets the type of LAG, i.e., how it is + configured / maintained"; + } + + leaf min-links { + type uint16; + description + "Specifies the mininum number of member + interfaces that must be active for the aggregate interface + to be available"; + } + } + + grouping aggregation-logical-state { + description + "Operational state data for aggregate interfaces"; + + leaf lag-speed { + type uint32; + units Mbps; + description + "Reports effective speed of the aggregate interface, + based on speed of active member interfaces"; + } + + leaf-list member { + when "../../config/lag-type = 'STATIC'" { + description + "The simple list of member interfaces is active + when the aggregate is statically configured"; + } + type oc-if:base-interface-ref; + description + "List of current member interfaces for the aggregate, + expressed as references to existing interfaces"; + } + } + + grouping aggregation-logical-top { + description "Top-level data definitions for LAGs"; + + container aggregation { + + description + "Options for logical interfaces representing + aggregates"; + + container config { + description + "Configuration variables for logical aggregate / + LAG interfaces"; + + uses aggregation-logical-config; + } + + container state { + + config false; + description + "Operational state variables for logical + aggregate / LAG interfaces"; + + uses aggregation-logical-config; + uses aggregation-logical-state; + + } + } + } + + grouping ethernet-if-aggregation-config { + description + "Adds configuration items for Ethernet interfaces + belonging to a logical aggregate / LAG"; + + leaf aggregate-id { + type leafref { + path "/oc-if:interfaces/oc-if:interface/oc-if:name"; + } + description + "Specify the logical aggregate interface to which + this interface belongs"; + } + } + + // data definition statements + + // augment statements + + augment "/oc-if:interfaces/oc-if:interface" { + + description "Adds LAG configuration to the interface module"; + + uses aggregation-logical-top { + when "oc-if:state/oc-if:type = 'ift:ieee8023adLag' or " + + "oc-if:state/oc-if:type = 'oc-ift:IF_AGGREGATE'" { + description + "active when the interface is set to type LAG"; + } + } + } + + augment "/oc-if:interfaces/oc-if:interface/oc-eth:ethernet/" + + "oc-eth:config" { + description + "Adds LAG settings to individual Ethernet interfaces"; + + uses ethernet-if-aggregation-config; + } + + augment "/oc-if:interfaces/oc-if:interface/oc-eth:ethernet/" + + "oc-eth:state" { + description + "Adds LAG settings to individual Ethernet interfaces"; + + uses ethernet-if-aggregation-config; + } + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-if-ethernet-ext.yang b/src/plugins/yang/openconfig/openconfig-if-ethernet-ext.yang new file mode 100644 index 0000000..9329dcd --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-ethernet-ext.yang @@ -0,0 +1,106 @@ +module openconfig-if-ethernet-ext { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/interfaces/ethernet-ext"; + + prefix "oc-eth-ext"; + + // import some basic types + import openconfig-interfaces { prefix oc-if; } + import openconfig-if-ethernet { prefix oc-eth; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module adds extensions to the base ethernet configuration + and operational state model to support additional use cases."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-07-10" { + description + "Initial version of Ethernet extensions module to add frame + size distribution stats"; + reference "0.1.0"; + } + + grouping ethernet-in-frames-size-dist { + description + "Grouping for defining the size distribution of the frames + received"; + + container in-distribution { + description + "The size distribution of the received frames."; + + leaf in-frames-64-octets { + type oc-yang:counter64; + description + "Number of packets (including bad packets) received that + were 64 bytes in length (excluding framing bits but + including FCS bytes)."; + } + + leaf in-frames-65-127-octets { + type oc-yang:counter64; + description + "Number of good and bad packets received that were + between 65 and 127 bytes in length (excluding framing bits + but including FCS bytes)."; + } + + leaf in-frames-128-255-octets { + type oc-yang:counter64; + description + "Number of good and bad packets received that were + between 128 and 255 bytes in length inclusive + (excluding framing bits but including FCS bytes)."; + } + + leaf in-frames-256-511-octets { + type oc-yang:counter64; + description + "Number of good and bad packets received that were + between 256 and 511 bytes in length inclusive + (excluding framing bits but including FCS bytes)."; + } + + leaf in-frames-512-1023-octets { + type oc-yang:counter64; + description + "Number of good and bad packets received that were + between 512 and 1023 bytes in length inclusive + (excluding framing bits but including FCS bytes)."; + } + + leaf in-frames-1024-1518-octets { + type oc-yang:counter64; + description + "Number of good and bad packets received that were + between 1024 and 1518 bytes in length inclusive + (excluding framing bits but including FCS bytes)."; + } + } + } + + // augment statements + + augment "/oc-if:interfaces/oc-if:interface/oc-eth:ethernet/" + + "oc-eth:state/oc-eth:counters" { + description + "Adds size distribution to the ethernet counters"; + + uses ethernet-in-frames-size-dist; + } + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-if-ethernet.yang b/src/plugins/yang/openconfig/openconfig-if-ethernet.yang new file mode 100644 index 0000000..cd6b526 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-ethernet.yang @@ -0,0 +1,428 @@ +module openconfig-if-ethernet { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/interfaces/ethernet"; + + prefix "oc-eth"; + + // import some basic types + import openconfig-interfaces { prefix oc-if; } + import iana-if-type { prefix ift; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Model for managing Ethernet interfaces -- augments the OpenConfig + model for interface configuration and state."; + + oc-ext:openconfig-version "2.6.1"; + + revision "2018-09-04" { + description + "Remove in-crc-align-errors as it is a duplicate of + in-crc-errors"; + reference "2.6.1"; + } + + revision "2018-08-28" { + description + "Add Ethernet counter in-block-errors"; + reference "2.6.0"; + } + + revision "2018-07-02" { + description + "Add new ethernet counters of in-undersize-frames, + in-crc-align-errors and the distribution container"; + reference "2.5.0"; + } + + revision "2018-04-10" { + description + "Add identities for 2.5 and 5 Gbps."; + reference "2.4.0"; + } + + revision "2018-01-05" { + description + "Add logical loopback to interface."; + reference "2.3.0"; + } + + revision "2017-12-21" { + description + "Added IPv6 router advertisement configuration."; + reference "2.1.0"; + } + + revision "2017-07-14" { + description + "Added Ethernet/IP state data; Add dhcp-client; + migrate to OpenConfig types modules; Removed or + renamed opstate values"; + reference "2.0.0"; + } + + revision "2016-12-22" { + description + "Fixes to Ethernet interfaces model"; + reference "1.1.0"; + } + + + // identity statements + + identity ETHERNET_SPEED { + description "base type to specify available Ethernet link + speeds"; + } + + identity SPEED_10MB { + base ETHERNET_SPEED; + description "10 Mbps Ethernet"; + } + + identity SPEED_100MB { + base ETHERNET_SPEED; + description "100 Mbps Ethernet"; + } + + identity SPEED_1GB { + base ETHERNET_SPEED; + description "1 Gbps Ethernet"; + } + + identity SPEED_2500MB { + base ETHERNET_SPEED; + description "2.5 Gbps Ethernet"; + } + + identity SPEED_5GB { + base ETHERNET_SPEED; + description "5 Gbps Ethernet"; + } + + identity SPEED_10GB { + base ETHERNET_SPEED; + description "10 Gbps Ethernet"; + } + + identity SPEED_25GB { + base ETHERNET_SPEED; + description "25 Gbps Ethernet"; + } + + identity SPEED_40GB { + base ETHERNET_SPEED; + description "40 Gbps Ethernet"; + } + + identity SPEED_50GB { + base ETHERNET_SPEED; + description "50 Gbps Ethernet"; + } + + identity SPEED_100GB { + base ETHERNET_SPEED; + description "100 Gbps Ethernet"; + } + + identity SPEED_UNKNOWN { + base ETHERNET_SPEED; + description + "Interface speed is unknown. Systems may report + speed UNKNOWN when an interface is down or unpopuplated (e.g., + pluggable not present)."; + } + + // typedef statements + + + // grouping statements + + grouping ethernet-interface-config { + description "Configuration items for Ethernet interfaces"; + + leaf mac-address { + type oc-yang:mac-address; + description + "Assigns a MAC address to the Ethernet interface. If not + specified, the corresponding operational state leaf is + expected to show the system-assigned MAC address."; + } + + leaf auto-negotiate { + type boolean; + default true; + description + "Set to TRUE to request the interface to auto-negotiate + transmission parameters with its peer interface. When + set to FALSE, the transmission parameters are specified + manually."; + reference + "IEEE 802.3-2012 auto-negotiation transmission parameters"; + } + + leaf duplex-mode { + type enumeration { + enum FULL { + description "Full duplex mode"; + } + enum HALF { + description "Half duplex mode"; + } + } + description + "When auto-negotiate is TRUE, this optionally sets the + duplex mode that will be advertised to the peer. If + unspecified, the interface should negotiate the duplex mode + directly (typically full-duplex). When auto-negotiate is + FALSE, this sets the duplex mode on the interface directly."; + } + + leaf port-speed { + type identityref { + base ETHERNET_SPEED; + } + description + "When auto-negotiate is TRUE, this optionally sets the + port-speed mode that will be advertised to the peer for + negotiation. If unspecified, it is expected that the + interface will select the highest speed available based on + negotiation. When auto-negotiate is set to FALSE, sets the + link speed to a fixed value -- supported values are defined + by ETHERNET_SPEED identities"; + } + + leaf enable-flow-control { + type boolean; + default false; + description + "Enable or disable flow control for this interface. + Ethernet flow control is a mechanism by which a receiver + may send PAUSE frames to a sender to stop transmission for + a specified time. + + This setting should override auto-negotiated flow control + settings. If left unspecified, and auto-negotiate is TRUE, + flow control mode is negotiated with the peer interface."; + reference + "IEEE 802.3x"; + } + } + + grouping ethernet-interface-state-counters { + description + "Ethernet-specific counters and statistics"; + + // ingress counters + + leaf in-mac-control-frames { + type oc-yang:counter64; + description + "MAC layer control frames received on the interface"; + } + + leaf in-mac-pause-frames { + type oc-yang:counter64; + description + "MAC layer PAUSE frames received on the interface"; + } + + leaf in-oversize-frames { + type oc-yang:counter64; + description + "The total number of frames received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets) and were otherwise + well formed."; + } + + leaf in-undersize-frames { + type oc-yang:counter64; + description + "The total number of frames received that were + less than 64 octets long (excluding framing bits, + but including FCS octets) and were otherwise well + formed."; + reference + "RFC 2819: Remote Network Monitoring MIB - + etherStatsUndersizePkts"; + } + + leaf in-jabber-frames { + type oc-yang:counter64; + description + "Number of jabber frames received on the + interface. Jabber frames are typically defined as oversize + frames which also have a bad CRC. Implementations may use + slightly different definitions of what constitutes a jabber + frame. Often indicative of a NIC hardware problem."; + } + + leaf in-fragment-frames { + type oc-yang:counter64; + description + "The total number of frames received that were less than + 64 octets in length (excluding framing bits but including + FCS octets) and had either a bad Frame Check Sequence + (FCS) with an integral number of octets (FCS Error) or a + bad FCS with a non-integral number of octets (Alignment + Error)."; + } + + leaf in-8021q-frames { + type oc-yang:counter64; + description + "Number of 802.1q tagged frames received on the interface"; + } + + leaf in-crc-errors { + type oc-yang:counter64; + description + "The total number of frames received that + had a length (excluding framing bits, but + including FCS octets) of between 64 and 1518 + octets, inclusive, but had either a bad + Frame Check Sequence (FCS) with an integral + number of octets (FCS Error) or a bad FCS with + a non-integral number of octets (Alignment Error)"; + reference + "RFC 2819: Remote Network Monitoring MIB - + etherStatsCRCAlignErrors"; + } + + leaf in-block-errors { + type oc-yang:counter64; + description + "The number of received errored blocks. Error detection codes + are capable of detecting whether one or more errors have + occurred in a given sequence of bits - the block. It is + normally not possible to determine the exact number of errored + bits within the block"; + } + + // egress counters + + leaf out-mac-control-frames { + type oc-yang:counter64; + description + "MAC layer control frames sent on the interface"; + } + + leaf out-mac-pause-frames { + type oc-yang:counter64; + description + "MAC layer PAUSE frames sent on the interface"; + } + + leaf out-8021q-frames { + type oc-yang:counter64; + description + "Number of 802.1q tagged frames sent on the interface"; + } + } + + grouping ethernet-interface-state { + description + "Grouping for defining Ethernet-specific operational state"; + + leaf hw-mac-address { + type oc-yang:mac-address; + description + "Represenets the 'burned-in', or system-assigned, MAC + address for the Ethernet interface."; + } + + leaf negotiated-duplex-mode { + type enumeration { + enum FULL { + description "Full duplex mode"; + } + enum HALF { + description "Half duplex mode"; + } + } + description + "When auto-negotiate is set to TRUE, and the interface has + completed auto-negotiation with the remote peer, this value + shows the duplex mode that has been negotiated."; + } + + leaf negotiated-port-speed { + type identityref { + base ETHERNET_SPEED; + } + description + "When auto-negotiate is set to TRUE, and the interface has + completed auto-negotiation with the remote peer, this value + shows the interface speed that has been negotiated."; + } + + container counters { + description "Ethernet interface counters"; + + uses ethernet-interface-state-counters; + + } + + } + + // data definition statements + + grouping ethernet-top { + description "top-level Ethernet config and state containers"; + + container ethernet { + description + "Top-level container for ethernet configuration + and state"; + + container config { + description "Configuration data for ethernet interfaces"; + + uses ethernet-interface-config; + + } + + container state { + + config false; + description "State variables for Ethernet interfaces"; + + uses ethernet-interface-config; + uses ethernet-interface-state; + + } + + } + } + + // augment statements + + augment "/oc-if:interfaces/oc-if:interface" { + description "Adds addtional Ethernet-specific configuration to + interfaces model"; + + uses ethernet-top { + when "oc-if:state/oc-if:type = 'ift:ethernetCsmacd'" { + description "Additional interface configuration parameters when + the interface type is Ethernet"; + } + } + } + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-if-ip-ext.yang b/src/plugins/yang/openconfig/openconfig-if-ip-ext.yang new file mode 100644 index 0000000..a5b720b --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-ip-ext.yang @@ -0,0 +1,169 @@ +module openconfig-if-ip-ext { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/interfaces/ip-ext"; + + prefix "oc-ip-ext"; + + import openconfig-interfaces { prefix oc-if; } + import openconfig-if-ip { prefix oc-ip; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module adds extensions to the base IP configuration and + operational state model to support additional use cases."; + + oc-ext:openconfig-version "2.3.0"; + + revision "2018-01-05" { + description + "Add logical loopback to interface."; + reference "2.3.0"; + } + + revision "2017-12-21" { + description + "Added IPv6 router advertisement configuration."; + reference "2.1.0"; + } + + revision "2017-07-14" { + description + "Added Ethernet/IP state data; Add dhcp-client; + migrate to OpenConfig types modules; Removed or + renamed opstate values"; + reference "2.0.0"; + } + + revision "2016-12-22" { + description + "Fixes to Ethernet interfaces model"; + reference "1.1.0"; + } + + + // grouping statements + + grouping ipv6-autoconf-config { + description + "Configuration data for IPv6 address autoconfiguration"; + + leaf create-global-addresses { + type boolean; + default true; + description + "[adapted from IETF IP model RFC 7277] + + If enabled, the host creates global addresses as + described in RFC 4862."; + reference + "RFC 4862: IPv6 Stateless Address Autoconfiguration + Section 5.5"; + } + leaf create-temporary-addresses { + type boolean; + default false; + description + "[adapted from IETF IP model RFC 7277] + + If enabled, the host creates temporary addresses as + described in RFC 4941."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6"; + } + + leaf temporary-valid-lifetime { + type uint32; + units "seconds"; + default 604800; + description + "[adapted from IETF IP model RFC 7277] + + The time period during which the temporary address + is valid."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6 + - TEMP_VALID_LIFETIME"; + } + + leaf temporary-preferred-lifetime { + type uint32; + units "seconds"; + default 86400; + description + "[adapted from IETF IP model RFC 7277] + + The time period during which the temporary address is + preferred."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6 + - TEMP_PREFERRED_LIFETIME"; + } + } + + grouping ipv6-autoconf-state { + description + "Operational state data for IPv6 address autoconfiguration"; + + //TODO: placeholder for additional opstate for IPv6 autoconf + } + + grouping ipv6-autoconf-top { + description + "Top-level grouping for IPv6 address autoconfiguration"; + + container autoconf { + description + "Top-level container for IPv6 autoconf"; + + container config { + description + "[adapted from IETF IP model RFC 7277] + + Parameters to control the autoconfiguration of IPv6 + addresses, as described in RFC 4862."; + reference + "RFC 4862: IPv6 Stateless Address Autoconfiguration"; + + uses ipv6-autoconf-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses ipv6-autoconf-config; + uses ipv6-autoconf-state; + } + } + } + + // data definition statements + + // augment statements + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface/oc-ip:ipv6" { + description + "Adds address autoconfiguration to the base IP model"; + + uses ipv6-autoconf-top; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-if-ip.yang b/src/plugins/yang/openconfig/openconfig-if-ip.yang new file mode 100644 index 0000000..a20e21c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-ip.yang @@ -0,0 +1,1312 @@ +module openconfig-if-ip { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/interfaces/ip"; + + prefix "oc-ip"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-vlan { prefix oc-vlan; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This model defines data for managing configuration and + operational state on IP (IPv4 and IPv6) interfaces. + + This model reuses data items defined in the IETF YANG model for + interfaces described by RFC 7277 with an alternate structure + (particularly for operational state data) and with + additional configuration items. + + Portions of this code were derived from IETF RFC 7277. + Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "2.3.0"; + + revision "2018-01-05" { + description + "Add logical loopback to interface."; + reference "2.3.0"; + } + + revision "2017-12-21" { + description + "Added IPv6 router advertisement configuration."; + reference "2.1.0"; + } + + revision "2017-07-14" { + description + "Added Ethernet/IP state data; Add dhcp-client; + migrate to OpenConfig types modules; Removed or + renamed opstate values"; + reference "2.0.0"; + } + + revision "2017-04-03"{ + description + "Update copyright notice."; + reference "1.1.1"; + } + + revision "2016-12-22" { + description + "Fixes to Ethernet interfaces model"; + reference "1.1.0"; + } + + + // typedef statements + + typedef ip-address-origin { + type enumeration { + enum OTHER { + description + "None of the following."; + } + enum STATIC { + description + "Indicates that the address has been statically + configured - for example, using NETCONF or a Command Line + Interface."; + } + enum DHCP { + description + "Indicates an address that has been assigned to this + system by a DHCP server."; + } + enum LINK_LAYER { + description + "Indicates an address created by IPv6 stateless + autoconfiguration that embeds a link-layer address in its + interface identifier."; + } + enum RANDOM { + description + "Indicates an address chosen by the system at + random, e.g., an IPv4 address within 169.254/16, an + RFC 4941 temporary address, or an RFC 7217 semantically + opaque address."; + reference + "RFC 4941: Privacy Extensions for Stateless Address + Autoconfiguration in IPv6 + RFC 7217: A Method for Generating Semantically Opaque + Interface Identifiers with IPv6 Stateless + Address Autoconfiguration (SLAAC)"; + } + } + description + "The origin of an address."; + } + + typedef neighbor-origin { + type enumeration { + enum OTHER { + description + "None of the following."; + } + enum STATIC { + description + "Indicates that the mapping has been statically + configured - for example, using NETCONF or a Command Line + Interface."; + } + enum DYNAMIC { + description + "Indicates that the mapping has been dynamically resolved + using, e.g., IPv4 ARP or the IPv6 Neighbor Discovery + protocol."; + } + } + description + "The origin of a neighbor entry."; + } + + // grouping statements + + grouping ip-common-global-config { + description + "Shared configuration data for IPv4 or IPv6 assigned + globally on an interface."; + + leaf dhcp-client { + type boolean; + default false; + description + "Enables a DHCP client on the interface in order to request + an address"; + } + } + + grouping ip-common-counters-state { + description + "Operational state for IP traffic statistics for IPv4 and + IPv6"; + + container counters { + description + "Packet and byte counters for IP transmission and + reception for the address family."; + + + leaf in-pkts { + type oc-yang:counter64; + description + "The total number of IP packets received for the specified + address family, including those received in error"; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf in-octets { + type oc-yang:counter64; + description + "The total number of octets received in input IP packets + for the specified address family, including those received + in error."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf in-error-pkts { + // TODO: this counter combines several error conditions -- + // could consider breaking them out to separate leaf nodes + type oc-yang:counter64; + description + "Number of IP packets discarded due to errors for the + specified address family, including errors in the IP + header, no route found to the IP destination, invalid + address, unknown protocol, etc."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf in-forwarded-pkts { + type oc-yang:counter64; + description + "The number of input packets for which the device was not + their final IP destination and for which the device + attempted to find a route to forward them to that final + destination."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf in-forwarded-octets { + type oc-yang:counter64; + description + "The number of octets received in input IP packets + for the specified address family for which the device was + not their final IP destination and for which the + device attempted to find a route to forward them to that + final destination."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf in-discarded-pkts { + type oc-yang:counter64; + description + "The number of input IP packets for the + specified address family, for which no problems were + encountered to prevent their continued processing, but + were discarded (e.g., for lack of buffer space)."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf out-pkts { + type oc-yang:counter64; + description + "The total number of IP packets for the + specified address family that the device supplied + to the lower layers for transmission. This includes + packets generated locally and those forwarded by the + device."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf out-octets { + type oc-yang:counter64; + description + "The total number of octets in IP packets for the + specified address family that the device + supplied to the lower layers for transmission. This + includes packets generated locally and those forwarded by + the device."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf out-error-pkts { + // TODO: this counter combines several error conditions -- + // could consider breaking them out to separate leaf nodes + type oc-yang:counter64; + description + "Number of IP packets for the specified address family + locally generated and discarded due to errors, including + no route found to the IP destination."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf out-forwarded-pkts { + type oc-yang:counter64; + description + "The number of packets for which this entity was not their + final IP destination and for which it was successful in + finding a path to their final destination."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf out-forwarded-octets { + type oc-yang:counter64; + description + "The number of octets in packets for which this entity was + not their final IP destination and for which it was + successful in finding a path to their final destination."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + + leaf out-discarded-pkts { + type oc-yang:counter64; + description + "The number of output IP packets for the + specified address family for which no problem was + encountered to prevent their transmission to their + destination, but were discarded (e.g., for lack of + buffer space)."; + reference + "RFC 4293 - Management Information Base for the + Internet Protocol (IP)"; + } + } + + } + + + + grouping ipv4-global-config { + description + "Configuration data for IPv4 interfaces across + all addresses assigned to the interface"; + + leaf enabled { + type boolean; + default true; + description + "Controls whether IPv4 is enabled or disabled on this + interface. When IPv4 is enabled, this interface is + connected to an IPv4 stack, and the interface can send + and receive IPv4 packets."; + } + + leaf mtu { + type uint16 { + range "68..max"; + } + units octets; + description + "The size, in octets, of the largest IPv4 packet that the + interface will send and receive. + + The server may restrict the allowed values for this leaf, + depending on the interface's type. + + If this leaf is not configured, the operationally used MTU + depends on the interface's type."; + reference + "RFC 791: Internet Protocol"; + } + + uses ip-common-global-config; + + + } + + grouping ipv4-address-config { + + description + "Per IPv4 adresss configuration data for the + interface."; + + leaf ip { + type oc-inet:ipv4-address; + description + "The IPv4 address on the interface."; + } + + leaf prefix-length { + type uint8 { + range "0..32"; + } + description + "The length of the subnet prefix."; + } + } + + grouping ipv4-neighbor-config { + description + "Per IPv4 neighbor configuration data. Neighbor + entries are analagous to static ARP entries, i.e., they + create a correspondence between IP and link-layer addresses"; + + leaf ip { + type oc-inet:ipv4-address; + description + "The IPv4 address of the neighbor node."; + } + leaf link-layer-address { + type oc-yang:phys-address; + mandatory true; + description + "The link-layer address of the neighbor node."; + } + } + + grouping ipv4-address-state { + description + "State variables for IPv4 addresses on the interface"; + + leaf origin { + type ip-address-origin; + description + "The origin of this address, e.g., statically configured, + assigned by DHCP, etc.."; + } + } + + grouping ipv4-neighbor-state { + description + "State variables for IPv4 neighbor entries on the interface."; + + leaf origin { + type neighbor-origin; + description + "The origin of this neighbor entry, static or dynamic."; + } + } + + grouping ipv6-global-config { + description + "Configuration data at the global level for each + IPv6 interface"; + + leaf enabled { + type boolean; + default true; + description + "Controls whether IPv6 is enabled or disabled on this + interface. When IPv6 is enabled, this interface is + connected to an IPv6 stack, and the interface can send + and receive IPv6 packets."; + } + + leaf mtu { + type uint32 { + range "1280..max"; + } + units octets; + description + "The size, in octets, of the largest IPv6 packet that the + interface will send and receive. + + The server may restrict the allowed values for this leaf, + depending on the interface's type. + + If this leaf is not configured, the operationally used MTU + depends on the interface's type."; + reference + "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification + Section 5"; + } + + leaf dup-addr-detect-transmits { + type uint32; + default 1; + description + "The number of consecutive Neighbor Solicitation messages + sent while performing Duplicate Address Detection on a + tentative address. A value of zero indicates that + Duplicate Address Detection is not performed on + tentative addresses. A value of one indicates a single + transmission with no follow-up retransmissions."; + reference + "RFC 4862: IPv6 Stateless Address Autoconfiguration"; + } + + uses ip-common-global-config; + } + + grouping ipv6-address-config { + description "Per-address configuration data for IPv6 interfaces"; + + leaf ip { + type oc-inet:ipv6-address; + description + "The IPv6 address on the interface."; + } + + leaf prefix-length { + type uint8 { + range "0..128"; + } + mandatory true; + description + "The length of the subnet prefix."; + } + } + + grouping ipv6-address-state { + description + "Per-address operational state data for IPv6 interfaces"; + + leaf origin { + type ip-address-origin; + description + "The origin of this address, e.g., static, dhcp, etc."; + } + + leaf status { + type enumeration { + enum PREFERRED { + description + "This is a valid address that can appear as the + destination or source address of a packet."; + } + enum DEPRECATED { + description + "This is a valid but deprecated address that should + no longer be used as a source address in new + communications, but packets addressed to such an + address are processed as expected."; + } + enum INVALID { + description + "This isn't a valid address, and it shouldn't appear + as the destination or source address of a packet."; + } + enum INACCESSIBLE { + description + "The address is not accessible because the interface + to which this address is assigned is not + operational."; + } + enum UNKNOWN { + description + "The status cannot be determined for some reason."; + } + enum TENTATIVE { + description + "The uniqueness of the address on the link is being + verified. Addresses in this state should not be + used for general communication and should only be + used to determine the uniqueness of the address."; + } + enum DUPLICATE { + description + "The address has been determined to be non-unique on + the link and so must not be used."; + } + enum OPTIMISTIC { + description + "The address is available for use, subject to + restrictions, while its uniqueness on a link is + being verified."; + } + } + description + "The status of an address. Most of the states correspond + to states from the IPv6 Stateless Address + Autoconfiguration protocol."; + reference + "RFC 4293: Management Information Base for the + Internet Protocol (IP) + - IpAddressStatusTC + RFC 4862: IPv6 Stateless Address Autoconfiguration"; + } + } + + grouping ipv6-neighbor-config { + description + "Per-neighbor configuration data for IPv6 interfaces"; + + leaf ip { + type oc-inet:ipv6-address; + description + "The IPv6 address of the neighbor node."; + } + + leaf link-layer-address { + type oc-yang:phys-address; + mandatory true; + description + "The link-layer address of the neighbor node."; + } + } + + grouping ipv6-neighbor-state { + description "Per-neighbor state variables for IPv6 interfaces"; + + leaf origin { + type neighbor-origin; + description + "The origin of this neighbor entry."; + } + leaf is-router { + type empty; + description + "Indicates that the neighbor node acts as a router."; + } + leaf neighbor-state { + type enumeration { + enum INCOMPLETE { + description + "Address resolution is in progress, and the link-layer + address of the neighbor has not yet been + determined."; + } + enum REACHABLE { + description + "Roughly speaking, the neighbor is known to have been + reachable recently (within tens of seconds ago)."; + } + enum STALE { + description + "The neighbor is no longer known to be reachable, but + until traffic is sent to the neighbor no attempt + should be made to verify its reachability."; + } + enum DELAY { + description + "The neighbor is no longer known to be reachable, and + traffic has recently been sent to the neighbor. + Rather than probe the neighbor immediately, however, + delay sending probes for a short while in order to + give upper-layer protocols a chance to provide + reachability confirmation."; + } + enum PROBE { + description + "The neighbor is no longer known to be reachable, and + unicast Neighbor Solicitation probes are being sent + to verify reachability."; + } + } + description + "The Neighbor Unreachability Detection state of this + entry."; + reference + "RFC 4861: Neighbor Discovery for IP version 6 (IPv6) + Section 7.3.2"; + } + } + + grouping ip-vrrp-ipv6-config { + description + "IPv6-specific configuration data for VRRP on IPv6 + interfaces"; + + leaf virtual-link-local { + type oc-inet:ip-address; + description + "For VRRP on IPv6 interfaces, sets the virtual link local + address"; + } + } + + grouping ip-vrrp-ipv6-state { + description + "IPv6-specific operational state for VRRP on IPv6 interfaces"; + + uses ip-vrrp-ipv6-config; + } + + grouping ip-vrrp-tracking-config { + description + "Configuration data for tracking interfaces + in a VRRP group"; + + leaf-list track-interface { + type leafref { + path "/oc-if:interfaces/oc-if:interface/oc-if:name"; + } + // TODO: we may need to add some restriction to ethernet + // or IP interfaces. + description + "Sets a list of one or more interfaces that should + be tracked for up/down events to dynamically change the + priority state of the VRRP group, and potentially + change the mastership if the tracked interface going + down lowers the priority sufficiently. Any of the tracked + interfaces going down will cause the priority to be lowered. + Some implementations may only support a single + tracked interface."; + } + + leaf priority-decrement { + type uint8 { + range 0..254; + } + default 0; + description "Set the value to subtract from priority when + the tracked interface goes down"; + } + } + + grouping ip-vrrp-tracking-state { + description + "Operational state data for tracking interfaces in a VRRP + group"; + } + + grouping ip-vrrp-tracking-top { + description + "Top-level grouping for VRRP interface tracking"; + + container interface-tracking { + description + "Top-level container for VRRP interface tracking"; + + container config { + description + "Configuration data for VRRP interface tracking"; + + uses ip-vrrp-tracking-config; + } + + container state { + + config false; + + description + "Operational state data for VRRP interface tracking"; + + uses ip-vrrp-tracking-config; + uses ip-vrrp-tracking-state; + } + } + } + + grouping ip-vrrp-config { + description + "Configuration data for VRRP on IP interfaces"; + + leaf virtual-router-id { + type uint8 { + range 1..255; + } + description + "Set the virtual router id for use by the VRRP group. This + usually also determines the virtual MAC address that is + generated for the VRRP group"; + } + + leaf-list virtual-address { + type oc-inet:ip-address; + description + "Configure one or more virtual addresses for the + VRRP group"; + } + + leaf priority { + type uint8 { + range 1..254; + } + default 100; + description + "Specifies the sending VRRP interface's priority + for the virtual router. Higher values equal higher + priority"; + } + + leaf preempt { + type boolean; + default true; + description + "When set to true, enables preemption by a higher + priority backup router of a lower priority master router"; + } + + leaf preempt-delay { + type uint16 { + range 0..3600; + } + default 0; + description + "Set the delay the higher priority router waits + before preempting"; + } + + leaf accept-mode { + type boolean; + // TODO: should we adopt the RFC default given the common + // operational practice of setting to true? + default false; + description + "Configure whether packets destined for + virtual addresses are accepted even when the virtual + address is not owned by the router interface"; + } + + leaf advertisement-interval { + type uint16 { + range 1..4095; + } + // TODO this range is theoretical -- needs to be validated + // against major implementations. + units "centiseconds"; + default 100; + description + "Sets the interval between successive VRRP + advertisements -- RFC 5798 defines this as a 12-bit + value expressed as 0.1 seconds, with default 100, i.e., + 1 second. Several implementation express this in units of + seconds"; + } + } + + grouping ip-vrrp-state { + description + "Operational state data for VRRP on IP interfaces"; + + leaf current-priority { + type uint8; + description "Operational value of the priority for the + interface in the VRRP group"; + } + } + + grouping ip-vrrp-top { + description + "Top-level grouping for Virtual Router Redundancy Protocol"; + + container vrrp { + description + "Enclosing container for VRRP groups handled by this + IP interface"; + + reference "RFC 5798 - Virtual Router Redundancy Protocol + (VRRP) Version 3 for IPv4 and IPv6"; + + list vrrp-group { + key "virtual-router-id"; + description + "List of VRRP groups, keyed by virtual router id"; + + leaf virtual-router-id { + type leafref { + path "../config/virtual-router-id"; + } + description + "References the configured virtual router id for this + VRRP group"; + } + + container config { + description + "Configuration data for the VRRP group"; + + uses ip-vrrp-config; + } + + container state { + + config false; + + description + "Operational state data for the VRRP group"; + + uses ip-vrrp-config; + uses ip-vrrp-state; + } + + uses ip-vrrp-tracking-top; + } + } + } + + grouping ipv6-ra-config { + description + "Configuration parameters for IPv6 router advertisements."; + + leaf interval { + type uint32; + units seconds; + description + "The interval between periodic router advertisement neighbor + discovery messages sent on this interface expressed in + seconds."; + } + + leaf lifetime { + type uint32; + units seconds; + description + "The lifetime advertised in the router advertisement neighbor + discovery message on this interface."; + } + + leaf suppress { + type boolean; + default false; + description + "When set to true, router advertisement neighbor discovery + messages are not transmitted on this interface."; + } + } + + grouping ipv4-proxy-arp-config { + description + "Configuration parameters for IPv4 proxy ARP"; + + leaf mode { + type enumeration { + enum DISABLE { + description + "The system should not respond to ARP requests that + do not specify an IP address configured on the local + subinterface as the target address."; + } + enum REMOTE_ONLY { + description + "The system responds to ARP requests only when the + sender and target IP addresses are in different + subnets."; + } + enum ALL { + description + "The system responds to ARP requests where the sender + and target IP addresses are in different subnets, as well + as those where they are in the same subnet."; + } + } + default "DISABLE"; + description + "When set to a value other than DISABLE, the local system should + respond to ARP requests that are for target addresses other than + those that are configured on the local subinterface using its own + MAC address as the target hardware address. If the REMOTE_ONLY + value is specified, replies are only sent when the target address + falls outside the locally configured subnets on the interface, + whereas with the ALL value, all requests, regardless of their + target address are replied to."; + reference "RFC1027: Using ARP to Implement Transparent Subnet Gateways"; + } + } + + grouping ipv4-top { + description "Top-level configuration and state for IPv4 + interfaces"; + + container ipv4 { + description + "Parameters for the IPv4 address family."; + + container addresses { + description + "Enclosing container for address list"; + + list address { + key "ip"; + description + "The list of configured IPv4 addresses on the interface."; + + leaf ip { + type leafref { + path "../config/ip"; + } + description "References the configured IP address"; + } + + container config { + description "Configuration data for each configured IPv4 + address on the interface"; + + uses ipv4-address-config; + + } + + container state { + + config false; + description "Operational state data for each IPv4 address + configured on the interface"; + + uses ipv4-address-config; + uses ipv4-address-state; + } + + } + } + + container proxy-arp { + description + "Configuration and operational state parameters + relating to proxy ARP. This functionality allows a + system to respond to ARP requests that are not + explicitly destined to the local system."; + + container config { + description + "Configuration parameters for proxy ARP"; + uses ipv4-proxy-arp-config; + } + + container state { + config false; + description + "Operational state parameters for proxy ARP"; + uses ipv4-proxy-arp-config; + } + } + + container neighbors { + description + "Enclosing container for neighbor list"; + + list neighbor { + key "ip"; + description + "A list of mappings from IPv4 addresses to + link-layer addresses. + + Entries in this list are used as static entries in the + ARP Cache."; + reference + "RFC 826: An Ethernet Address Resolution Protocol"; + + leaf ip { + type leafref { + path "../config/ip"; + } + description "References the configured IP address"; + } + + container config { + description "Configuration data for each configured IPv4 + address on the interface"; + + uses ipv4-neighbor-config; + + } + + container state { + + config false; + description "Operational state data for each IPv4 address + configured on the interface"; + + uses ipv4-neighbor-config; + uses ipv4-neighbor-state; + } + } + } + + uses oc-if:sub-unnumbered-top; + + container config { + description + "Top-level IPv4 configuration data for the interface"; + + uses ipv4-global-config; + } + + container state { + + config false; + description + "Top level IPv4 operational state data"; + + uses ipv4-global-config; + uses ip-common-counters-state; + } + } + } + + grouping ipv6-top { + description + "Top-level configuration and state for IPv6 interfaces"; + + container ipv6 { + description + "Parameters for the IPv6 address family."; + + container addresses { + description + "Enclosing container for address list"; + + list address { + key "ip"; + description + "The list of configured IPv6 addresses on the interface."; + + leaf ip { + type leafref { + path "../config/ip"; + } + description "References the configured IP address"; + } + + container config { + description + "Configuration data for each IPv6 address on + the interface"; + + uses ipv6-address-config; + + } + + container state { + + config false; + description + "State data for each IPv6 address on the + interface"; + + uses ipv6-address-config; + uses ipv6-address-state; + } + } + } + + container router-advertisement { + description + "Configuration and operational state parameters relating to + router advertisements."; + + container config { + description + "Configuration parameters relating to router advertisements + for IPv6."; + uses ipv6-ra-config; + } + + container state { + config false; + description + "Operational state parameters relating to router + advertisements for IPv6."; + uses ipv6-ra-config; + } + } + + container neighbors { + description + "Enclosing container for list of IPv6 neighbors"; + + list neighbor { + key "ip"; + description + "List of IPv6 neighbors"; + + leaf ip { + type leafref { + path "../config/ip"; + } + description + "References the configured IP neighbor address"; + } + + container config { + description "Configuration data for each IPv6 address on + the interface"; + + uses ipv6-neighbor-config; + + } + + container state { + + config false; + description "State data for each IPv6 address on the + interface"; + + uses ipv6-neighbor-config; + uses ipv6-neighbor-state; + } + } + } + uses oc-if:sub-unnumbered-top; + + container config { + description "Top-level config data for the IPv6 interface"; + + uses ipv6-global-config; + } + + container state { + config false; + description + "Top-level operational state data for the IPv6 interface"; + + uses ipv6-global-config; + uses ip-common-counters-state; + + } + } + } + + // augment statements + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface" { + description + "IPv4 address family configuration for + interfaces"; + + uses ipv4-top; + + } + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface" { + description + "IPv6 address family configuration for + interfaces"; + + uses ipv6-top; + + } + + // VRRP for IPv4 interfaces + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface/oc-ip:ipv4/oc-ip:addresses/oc-ip:address" { + + description + "Additional IP addr family configuration for + interfaces"; + + uses ip-vrrp-top; + + } + + // VRRP for IPv6 interfaces + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface/oc-ip:ipv6/oc-ip:addresses/oc-ip:address" { + description + "Additional IP addr family configuration for + interfaces"; + + uses ip-vrrp-top; + + } + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface/oc-ip:ipv6/oc-ip:addresses/oc-ip:address/" + + "vrrp/vrrp-group/config" { + description + "Additional VRRP data for IPv6 interfaces"; + + uses ip-vrrp-ipv6-config; + } + + augment "/oc-if:interfaces/oc-if:interface/oc-if:subinterfaces/" + + "oc-if:subinterface/oc-ip:ipv6/oc-ip:addresses/oc-ip:address/vrrp/" + + "vrrp-group/state" { + description + "Additional VRRP data for IPv6 interfaces"; + + uses ip-vrrp-ipv6-state; + } + + // Augments for for routed VLANs + + augment "/oc-if:interfaces/oc-if:interface/oc-vlan:routed-vlan" { + description + "IPv4 address family configuration for + interfaces"; + + uses ipv4-top; + } + + augment "/oc-if:interfaces/oc-if:interface/oc-vlan:routed-vlan" { + description + "IPv6 address family configuration for + interfaces"; + + uses ipv6-top; + } + + // VRRP for routed VLAN interfaces + + augment "/oc-if:interfaces/oc-if:interface/oc-vlan:routed-vlan/" + + "oc-ip:ipv4/oc-ip:addresses/oc-ip:address" { + description + "Additional IP addr family configuration for + interfaces"; + + uses ip-vrrp-top; + + } + + augment "/oc-if:interfaces/oc-if:interface/oc-vlan:routed-vlan/" + + "oc-ip:ipv6/oc-ip:addresses/oc-ip:address" { + description + "Additional IP addr family configuration for + interfaces"; + + uses ip-vrrp-top; + + } + + augment "/oc-if:interfaces/oc-if:interface/oc-vlan:routed-vlan/" + + "oc-ip:ipv6/oc-ip:addresses/oc-ip:address/vrrp/vrrp-group/config" { + description + "Additional VRRP data for IPv6 interfaces"; + + uses ip-vrrp-ipv6-config; + } + + + augment "/oc-if:interfaces/oc-if:interface/oc-vlan:routed-vlan/" + + "oc-ip:ipv6/oc-ip:addresses/oc-ip:address/vrrp/vrrp-group/state" { + description + "Additional VRRP data for IPv6 interfaces"; + + uses ip-vrrp-ipv6-state; + } + + // rpc statements + + // notification statements +} diff --git a/src/plugins/yang/openconfig/openconfig-if-poe.yang b/src/plugins/yang/openconfig/openconfig-if-poe.yang new file mode 100644 index 0000000..f3c3bf1 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-poe.yang @@ -0,0 +1,99 @@ +module openconfig-if-poe { + + yang-version "1"; + + namespace "http://openconfig.net/yang/poe"; + + prefix "oc-poe"; + + import openconfig-if-ethernet { prefix oc-eth; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-extensions { prefix oc-ext; } + + organization "OpenConfig working group"; + + contact + "Openconfig working group + www.openconfig.net"; + + description + "This module defines configuration and state data for + Power over Ethernet (PoE) based on the IEEE 802.3af + standard."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2017-09-14" { + description + "Initial public revision"; + reference "0.1.0"; + } + + grouping poe-ethernet-config { + description + "PoE ethernet config grouping"; + + leaf enabled { + type boolean; + default "true"; + description + "Enable or disable PoE in the ethernet interface."; + } + } + + grouping poe-ethernet-state { + description + "PoE ethernet state grouping"; + + leaf power-used { + type decimal64 { + fraction-digits 2; + } + units Watts; + description + "Power used by the ethernet interface in Watts."; + } + + leaf power-class { + type uint8; + description + "IEEE 802.3af Power class detected for this ethernet + interface."; + } + } + + grouping poe-ethernet-top { + description + "Ethernet top level grouping"; + + container poe { + description + "Top-level container for PoE configuration and state data"; + + container config { + description + "Configuration data for PoE"; + + uses poe-ethernet-config; + } + + container state { + config false; + + description + "Operational state data for PoE"; + + uses poe-ethernet-config; + uses poe-ethernet-state; + } + } + } + + augment "/oc-if:interfaces/oc-if:interface/oc-eth:ethernet" { + description + "Adds PoE to the ethernet model."; + + uses poe-ethernet-top; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-if-tunnel.yang b/src/plugins/yang/openconfig/openconfig-if-tunnel.yang new file mode 100644 index 0000000..4efff64 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-tunnel.yang @@ -0,0 +1,109 @@ +module openconfig-if-tunnel { + yang-version "1"; + + namespace "http://openconfig.net/yang/interfaces/tunnel"; + + prefix "oc-tun"; + + import openconfig-interfaces { prefix oc-if; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-if-ip { prefix oc-ip; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This model adds extensions to the OpenConfig interfaces + model to configure tunnel interfaces on a network + device."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-01-05" { + description + "Initial tunnel model"; + reference "0.1.0"; + } + + grouping tunnel-top { + description + "Top-level grouping for parameters related to + a tunnel interface."; + + container tunnel { + description + "In the case that the interface is logical tunnel + interface, the parameters for the tunnel are + specified within this subtree. Tunnel interfaces + have only a single logical subinterface associated + with them."; + + container config { + description + "Configuration parameters associated with the + tunnel interface"; + uses tunnel-config; + } + + container state { + config false; + description + "Operational state parameters associated with + the tunnel interface."; + uses tunnel-config; + } + + uses oc-ip:ipv4-top; + uses oc-ip:ipv6-top; + } + } + + grouping tunnel-config { + description + "Configuraton parameters relating to a tunnel + interface."; + + leaf src { + type oc-inet:ip-address; + description + "The source address that should be used for the + tunnel."; + } + + leaf dst { + type oc-inet:ip-address; + description + "The destination address for the tunnel."; + } + + leaf ttl { + type uint8 { + range "1..255"; + } + description + "The time-to-live (or hop limit) that should be utilised + for the IP packets used for the tunnel transport."; + } + + leaf gre-key { + type uint32; + description + "The GRE key to be specified for the tunnel. The + key is used to identify a traffic flow within + a tunnel."; + reference + "RFC2890: Key and Sequence Number Extensions to GRE"; + } + } + + augment "/oc-if:interfaces/oc-if:interface" { + description + "Augment to add tunnel configuration to interfaces"; + uses tunnel-top; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-if-types.yang b/src/plugins/yang/openconfig/openconfig-if-types.yang new file mode 100644 index 0000000..3743878 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-if-types.yang @@ -0,0 +1,98 @@ +module openconfig-if-types { + yang-version "1"; + + namespace "http://openconfig.net/yang/openconfig-if-types"; + + prefix "oc-ift"; + + // import statements + import openconfig-extensions { prefix oc-ext; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module contains a set of interface type definitions that + are used across OpenConfig models. These are generally physical + or logical interfaces, distinct from hardware ports (which are + described by the OpenConfig platform model)."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2018-01-05" { + description + "Add tunnel types into the INTERFACE_TYPE identity."; + reference "0.2.0"; + } + + revision "2016-11-14" { + description + "Initial version"; + reference "0.1.0"; + } + + + identity INTERFACE_TYPE { + description + "Base identity from which interface types are derived."; + } + + identity IF_ETHERNET { + base INTERFACE_TYPE; + description + "Ethernet interfaces based on IEEE 802.3 standards, as well + as FlexEthernet"; + reference + "IEEE 802.3-2015 - IEEE Standard for Ethernet + OIF Flex Ethernet Implementation Agreement 1.0"; + } + + identity IF_AGGREGATE { + base INTERFACE_TYPE; + description + "An aggregated, or bonded, interface forming a + Link Aggregation Group (LAG), or bundle, most often based on + the IEEE 802.1AX (or 802.3ad) standard."; + reference + "IEEE 802.1AX-2008"; + } + + identity IF_LOOPBACK { + base INTERFACE_TYPE; + description + "A virtual interface designated as a loopback used for + various management and operations tasks."; + } + + identity IF_ROUTED_VLAN { + base INTERFACE_TYPE; + description + "A logical interface used for routing services on a VLAN. + Such interfaces are also known as switch virtual interfaces + (SVI) or integrated routing and bridging interfaces (IRBs)."; + } + + identity IF_SONET { + base INTERFACE_TYPE; + description + "SONET/SDH interface"; + } + + identity IF_TUNNEL_GRE4 { + base INTERFACE_TYPE; + description + "A GRE tunnel over IPv4 transport."; + } + + identity IF_TUNNEL_GRE6 { + base INTERFACE_TYPE; + description + "A GRE tunnel over IPv6 transport."; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-igmp-types.yang b/src/plugins/yang/openconfig/openconfig-igmp-types.yang new file mode 100644 index 0000000..5fe22e7 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-igmp-types.yang @@ -0,0 +1,53 @@ +module openconfig-igmp-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/igmp/types"; + + prefix "oc-igmp-types"; + + // import some basic types + import openconfig-extensions { prefix "oc-ext"; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types related to the IGMP protocol model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-02-19" { + description + "Initial revision."; + reference "0.1.0"; + } + + // typedef statements + + typedef igmp-version { + type uint8 { + range 1..3; + } + description + "IGMP Version."; + reference "v1 = RFC1112, v2 = RFC2236, v3 = RFC3376"; + } + + typedef igmp-interval-type { + type uint16 { + range 1..1024; + } + units "seconds"; + description + "Interval at which the router sends the IGMP query message toward + the upstream neighbor."; + reference "RFC3376 8.2 Page 40"; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-igmp.yang b/src/plugins/yang/openconfig/openconfig-igmp.yang new file mode 100644 index 0000000..4668ea1 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-igmp.yang @@ -0,0 +1,356 @@ +module openconfig-igmp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/igmp"; + + prefix "oc-igmp"; + + // import some basic types/interfaces + import openconfig-igmp-types { prefix oc-igmp-types; } + import openconfig-types { prefix "oc-types"; } + import openconfig-acl { prefix "oc-acl"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-interfaces { prefix oc-if; } + import ietf-inet-types { prefix "inet"; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "An OpenConfig model for Internet Group Management Protocol (IGMP)."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-02-19" { + description + "Initial revision."; + reference "0.1.0"; + } + + grouping admin-config { + description + "Re-usable grouping to enable or disable a particular feature."; + + leaf enabled { + type boolean; + default false; + description + "When set to true, the functionality within which this + leaf is defined is enabled, when set to false it is + explicitly disabled."; + } + } + + grouping igmp-interface-config { + description + "Configuration data for IGMP on each interface."; + + leaf interface-id { + type oc-if:interface-id; + description + "Reference to an interface on which IGMP is enabled."; + } + + uses admin-config; + + leaf version { + type oc-igmp-types:igmp-version; + description + "IGMP Version."; + } + + leaf query-interval { + type oc-igmp-types:igmp-interval-type; + description + "Interval at which the router sends the IGMP membership + queries."; + } + + leaf filter-prefixes { + type string; + // TODO work out what this should be. + // On Juniper it's a "policy" and on Cisco a sort of "class map" + description + "List used to filter joins."; + } + } + + grouping igmp-counters-per-version { + description + "Counters for each IGMP protocol version."; + + container state { + config false; + description + "Counters for each IGMP protocol version."; + + leaf v1 { + type uint32; + description + "IGMP v1."; + } + leaf v2 { + type uint32; + description + "IGMP v2."; + } + leaf v3 { + type uint32; + description + "IGMP v3."; + } + } + } + + grouping igmp-interface-counters { + description + "State and session data for IGMP on each interface."; + + + container counters { + description + "Counters avaiable on a per interface bases for IGMP."; + + container queries { + description + "IGMP membership queries."; + + container sent { + description + "Number of IGMP membership queries sent."; + uses igmp-counters-per-version; + } + + container received { + description + "Number of IGMP membership queries received."; + uses igmp-counters-per-version; + } + } + + container reports { + description + "Number of IGMP membership reports received."; + uses igmp-counters-per-version; + } + } + } + + grouping igmp-snooping-state { + description + "IGMP membership snooping state."; + + leaf group { + type inet:ipv4-address; + description + "Multicast address."; + } + + leaf source { + type inet:ipv4-address; + description + "Source address of multicast."; + } + + leaf reporter { + type inet:ipv4-address; + description + "Address of the last reporter."; + } + } + + grouping igmp-snooping-structural { + description + "IGMP membership information determined through snooping."; + + container membership-groups { + description + "List of IGMP Membership information."; + + list group { + key "group"; + config false; + description + "Multicast group membership."; + + leaf group { + type leafref { + path "../state/group"; + } + description + "Multicast address."; + } + + container state { + config false; + description + "Multicast group membership."; + + uses igmp-snooping-state; + } + } + } + } + + grouping igmp-interface-state { + description + "IGMP interface state."; + + leaf query-expires { + type oc-types:timeticks64; + description + "This timestamp indicates the time that the next query is sent. + The value is the timestamp in seconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + } + + grouping igmp-interface-top { + description + "Configuration and state data for IGMP on each interface."; + + container interfaces { + description + "The interfaces on which IGMP is configured."; + + list interface { + key "interface-id"; + description + "This container defines interface IGMP configuration and + state information."; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "Reference to an interface on which IGMP is enabled."; + } + + container config { + description + "IGMP interface configuration."; + + uses igmp-interface-config; + } + + container state { + config false; + description + "This container defines state information for IGMP + interfaces."; + + uses igmp-interface-state; + uses igmp-interface-config; + } + + uses igmp-interface-counters; + uses igmp-snooping-structural; + uses oc-if:interface-ref; + } + } + } + + grouping igmp-ssm-maps-config { + description + "A Source Specific Multicast (SSM) mapping. This allows + IGMP v2 hosts to be able to join in SSM environments + by translating IGMP v2 reports into IGMP v3 reports. + The request in an IGMP v2 join is sent toward the source + address found by matching the multicast address."; + + leaf source { + type inet:ipv4-address; + description + "Multicast source address."; + } + + leaf ssm-ranges { + type leafref { + path "/oc-acl:acl/oc-acl:acl-sets/oc-acl:acl-set/" + + "oc-acl:config/oc-acl:name"; + } + description + "List of accepted source specific multicast (SSM) address + ranges."; + } + } + + grouping igmp-global-config { + description + "This grouping defines global config options for IGMP."; + + } + + grouping igmp-global-top { + description + "Top level grouping for global IGMP configuration."; + + container ssm { + description + "Source specific multicast (SSM)."; + + container mappings { + description + "A list of source specific multicast (SSM) mappings."; + + list mapping { + key "source"; + description + "A Source Specific Multicast (SSM) mapping. This allows + IGMP v2 hosts to be able to join in SSM environments + by translating IGMP v2 reports into IGMP v3 reports. + The request in an IGMP v2 join is sent toward the source + address found by matching the multicast address."; + + leaf source { + type leafref { + path "../config/source"; + } + description + "Multicast source address."; + } + + container config { + description + "Configuration for SSM maps."; + uses igmp-ssm-maps-config; + } + container state { + config false; + description + "State for SSM maps."; + uses igmp-ssm-maps-config; + } + } + } + } + } + + grouping igmp-top { + description + "Top-level grouping for IGMP."; + + container igmp { + description + "Top-level IGMP configuration and operational state."; + + container global { + description + "Global IGMP configuration and operational state."; + uses igmp-global-top; + } + + uses igmp-interface-top; + } + } + + // data definition statements +} diff --git a/src/plugins/yang/openconfig/openconfig-inet-types.yang b/src/plugins/yang/openconfig/openconfig-inet-types.yang new file mode 100644 index 0000000..fbb872f --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-inet-types.yang @@ -0,0 +1,332 @@ +module openconfig-inet-types { + + yang-version "1"; + namespace "http://openconfig.net/yang/types/inet"; + prefix "oc-inet"; + + import openconfig-extensions { prefix "oc-ext"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains a set of Internet address related + types for use in OpenConfig modules. + + Portions of this code were derived from IETF RFC 6021. + Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "0.3.1"; + + revision 2017-08-24 { + description + "Minor formatting fixes."; + reference "0.3.1"; + } + + revision 2017-07-06 { + description + "Add domain-name and host typedefs"; + reference "0.3.0"; + } + + revision 2017-04-03 { + description + "Add ip-version typedef."; + reference "0.2.0"; + } + + revision 2017-04-03 { + description + "Update copyright notice."; + reference "0.1.1"; + } + + revision 2017-01-26 { + description + "Initial module for inet types"; + reference "0.1.0"; + } + + // IPv4 and IPv6 types. + + typedef ipv4-address { + type string { + pattern '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|' + + '25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4]' + + '[0-9]|25[0-5])'; + } + description + "An IPv4 address in dotted quad notation using the default + zone."; + } + + typedef ipv4-address-zoned { + type string { + pattern '^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|' + + '25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4]' + + '[0-9]|25[0-5])(%[a-zA-Z0-9_]+)$'; + } + description + "An IPv4 address in dotted quad notation. This type allows + specification of a zone index to disambiguate identical + address values. For link-local addresses, the index is + typically the interface index or interface name."; + } + + typedef ipv6-address { + type string { + pattern + // Must support compression through different lengths + // therefore this regexp is complex. + '^(([0-9a-fA-F]{1,4}:){7}[0-9a-fA-F]{1,4}|' + + '([0-9a-fA-F]{1,4}:){1,7}:|' + + '([0-9a-fA-F]{1,4}:){1,6}:[0-9a-fA-F]{1,4}|' + + '([0-9a-fA-F]{1,4}:){1,5}(:[0-9a-fA-F]{1,4}){1,2}|' + + '([0-9a-fA-F]{1,4}:){1,4}(:[0-9a-fA-F]{1,4}){1,3}|' + + '([0-9a-fA-F]{1,4}:){1,3}(:[0-9a-fA-F]{1,4}){1,4}|' + + '([0-9a-fA-F]{1,4}:){1,2}(:[0-9a-fA-F]{1,4}){1,5}|' + + '[0-9a-fA-F]{1,4}:((:[0-9a-fA-F]{1,4}){1,6})|' + + ':((:[0-9a-fA-F]{1,4}){1,7}|:)' + + ')$'; + } + description + "An IPv6 address represented as either a full address; shortened + or mixed-shortened formats, using the default zone."; + } + + typedef ipv6-address-zoned { + type string { + pattern + // Must support compression through different lengths + // therefore this regexp is complex. + '^(([0-9a-fA-F]{1,4}:){7}[0-9a-fA-F]{1,4}|' + + '([0-9a-fA-F]{1,4}:){1,7}:|' + + '([0-9a-fA-F]{1,4}:){1,6}:[0-9a-fA-F]{1,4}|' + + '([0-9a-fA-F]{1,4}:){1,5}(:[0-9a-fA-F]{1,4}){1,2}|' + + '([0-9a-fA-F]{1,4}:){1,4}(:[0-9a-fA-F]{1,4}){1,3}|' + + '([0-9a-fA-F]{1,4}:){1,3}(:[0-9a-fA-F]{1,4}){1,4}|' + + '([0-9a-fA-F]{1,4}:){1,2}(:[0-9a-fA-F]{1,4}){1,5}|' + + '[0-9a-fA-F]{1,4}:((:[0-9a-fA-F]{1,4}){1,6})|' + + ':((:[0-9a-fA-F]{1,4}){1,7}|:)' + + ')(%[a-zA-Z0-9_]+)$'; + } + description + "An IPv6 address represented as either a full address; shortened + or mixed-shortened formats. This type allows specification of + a zone index to disambiguate identical address values. For + link-local addresses, the index is typically the interface + index or interface name."; + } + + typedef ipv4-prefix { + type string { + pattern '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|' + + '25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4]' + + '[0-9]|25[0-5])/(([0-9])|([1-2][0-9])|(3[0-2]))'; + } + description + "An IPv4 prefix represented in dotted quad notation followed by + a slash and a CIDR mask (0 <= mask <= 32)."; + } + + typedef ipv6-prefix { + type string { + pattern + '^(([0-9a-fA-F]{1,4}:){7}[0-9a-fA-F]{1,4}|' + + '([0-9a-fA-F]{1,4}:){1,7}:|' + + '([0-9a-fA-F]{1,4}:){1,6}:[0-9a-fA-F]{1,4}' + + '([0-9a-fA-F]{1,4}:){1,5}(:[0-9a-fA-F]{1,4}){1,2}|' + + '([0-9a-fA-F]{1,4}:){1,4}(:[0-9a-fA-F]{1,4}){1,3}|' + + '([0-9a-fA-F]{1,4}:){1,3}(:[0-9a-fA-F]{1,4}){1,4}|' + + '([0-9a-fA-F]{1,4}:){1,2}(:[0-9a-fA-F]{1,4}){1,5}|' + + '[0-9a-fA-F]{1,4}:((:[0-9a-fA-F]{1,4}){1,6})|' + + ':((:[0-9a-fA-F]{1,4}){1,7}|:)' + + ')/(12[0-8]|1[0-1][0-9]|[1-9][0-9]|[0-9])$'; + } + description + "An IPv6 prefix represented in full, shortened, or mixed + shortened format followed by a slash and CIDR mask + (0 <= mask <= 128)."; + } + + typedef ip-address { + type union { + type ipv4-address; + type ipv6-address; + } + description + "An IPv4 or IPv6 address with no prefix specified."; + } + + typedef ip-prefix { + type union { + type ipv4-prefix; + type ipv6-prefix; + } + description + "An IPv4 or IPv6 prefix."; + } + + typedef ip-version { + type enumeration { + enum UNKNOWN { + value 0; + description + "An unknown or unspecified version of the Internet + protocol."; + } + enum IPV4 { + value 4; + description + "The IPv4 protocol as defined in RFC 791."; + } + enum IPV6 { + value 6; + description + "The IPv6 protocol as defined in RFC 2460."; + } + } + description + "This value represents the version of the IP protocol. + Note that integer representation of the enumerated values + are not specified, and are not required to follow the + InetVersion textual convention in SMIv2."; + reference + "RFC 791: Internet Protocol + RFC 2460: Internet Protocol, Version 6 (IPv6) Specification + RFC 4001: Textual Conventions for Internet Network Addresses"; + } + + typedef domain-name { + type string { + length "1..253"; + pattern + '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*' + + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)' + + '|\.'; + } + description + "The domain-name type represents a DNS domain name. + Fully quallified left to the models which utilize this type. + + Internet domain names are only loosely specified. Section + 3.5 of RFC 1034 recommends a syntax (modified in Section + 2.1 of RFC 1123). The pattern above is intended to allow + for current practice in domain name use, and some possible + future expansion. It is designed to hold various types of + domain names, including names used for A or AAAA records + (host names) and other records, such as SRV records. Note + that Internet host names have a stricter syntax (described + in RFC 952) than the DNS recommendations in RFCs 1034 and + 1123, and that systems that want to store host names in + schema nodes using the domain-name type are recommended to + adhere to this stricter standard to ensure interoperability. + + The encoding of DNS names in the DNS protocol is limited + to 255 characters. Since the encoding consists of labels + prefixed by a length bytes and there is a trailing NULL + byte, only 253 characters can appear in the textual dotted + notation. + + Domain-name values use the US-ASCII encoding. Their canonical + format uses lowercase US-ASCII characters. Internationalized + domain names MUST be encoded in punycode as described in RFC + 3492"; + } + + typedef host { + type union { + type ip-address; + type domain-name; + } + description + "The host type represents either an unzoned IP address or a DNS + domain name."; + } + + typedef as-number { + type uint32; + description + "A numeric identifier for an autonomous system (AS). An AS is a + single domain, under common administrative control, which forms + a unit of routing policy. Autonomous systems can be assigned a + 2-byte identifier, or a 4-byte identifier which may have public + or private scope. Private ASNs are assigned from dedicated + ranges. Public ASNs are assigned from ranges allocated by IANA + to the regional internet registries (RIRs)."; + reference + "RFC 1930 Guidelines for creation, selection, and registration + of an Autonomous System (AS) + RFC 4271 A Border Gateway Protocol 4 (BGP-4)"; + } + + typedef dscp { + type uint8 { + range "0..63"; + } + description + "A differentiated services code point (DSCP) marking within the + IP header."; + reference + "RFC 2474 Definition of the Differentiated Services Field + (DS Field) in the IPv4 and IPv6 Headers"; + } + + typedef ipv6-flow-label { + type uint32 { + range "0..1048575"; + } + description + "The IPv6 flow-label is a 20-bit value within the IPv6 header + which is optionally used by the source of the IPv6 packet to + label sets of packets for which special handling may be + required."; + reference + "RFC 2460 Internet Protocol, Version 6 (IPv6) Specification"; + } + + typedef port-number { + type uint16; + description + "A 16-bit port number used by a transport protocol such as TCP + or UDP."; + reference + "RFC 768 User Datagram Protocol + RFC 793 Transmission Control Protocol"; + } + + typedef uri { + type string; + description + "An ASCII-encoded Uniform Resource Identifier (URI) as defined + in RFC 3986."; + reference + "RFC 3986 Uniform Resource Identifier (URI): Generic Syntax"; + } + + typedef url { + type string; + description + "An ASCII-encoded Uniform Resource Locator (URL) as defined + in RFC 3986, section 1.1.3"; + reference + "RFC 3986, paragraph 1.1.3"; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-interfaces.yang b/src/plugins/yang/openconfig/openconfig-interfaces.yang new file mode 100644 index 0000000..d11e0b2 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-interfaces.yang @@ -0,0 +1,1040 @@ +module openconfig-interfaces { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/interfaces"; + + prefix "oc-if"; + + // import some basic types + import ietf-interfaces { prefix ietf-if; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Model for managing network interfaces and subinterfaces. This + module also defines convenience types / groupings for other + models to create references to interfaces: + + base-interface-ref (type) - reference to a base interface + interface-ref (grouping) - container for reference to a + interface + subinterface + interface-ref-state (grouping) - container for read-only + (opstate) reference to interface + subinterface + + This model reuses data items defined in the IETF YANG model for + interfaces described by RFC 7223 with an alternate structure + (particularly for operational state data) and with + additional configuration items. + + Portions of this code were derived from IETF RFC 7223. + Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "2.4.0"; + + revision "2018-08-07" { + description + "Add leaf to indicate whether an interface is physical or + logical."; + reference "2.4.0"; + } + + revision "2018-07-02" { + description + "Add in-pkts and out-pkts in counters"; + reference "2.3.2"; + } + + revision "2018-04-24" { + description + "Clarified behavior of last-change state leaf"; + reference "2.3.1"; + } + + revision "2018-01-05" { + description + "Add logical loopback to interface."; + reference "2.3.0"; + } + + revision "2017-12-22" { + description + "Add IPv4 proxy ARP configuration."; + reference "2.2.0"; + } + + revision "2017-12-21" { + description + "Added IPv6 router advertisement configuration."; + reference "2.1.0"; + } + + revision "2017-07-14" { + description + "Added Ethernet/IP state data; Add dhcp-client; + migrate to OpenConfig types modules; Removed or + renamed opstate values"; + reference "2.0.0"; + } + + revision "2017-04-03" { + description + "Update copyright notice."; + reference "1.1.1"; + } + + revision "2016-12-22" { + description + "Fixes to Ethernet interfaces model"; + reference "1.1.0"; + } + + + // typedef statements + + typedef base-interface-ref { + type leafref { + path "/oc-if:interfaces/oc-if:interface/oc-if:name"; + } + description + "Reusable type for by-name reference to a base interface. + This type may be used in cases where ability to reference + a subinterface is not required."; + } + + typedef interface-id { + type string; + description + "User-defined identifier for an interface, generally used to + name a interface reference. The id can be arbitrary but a + useful convention is to use a combination of base interface + name and subinterface index."; + } + + // grouping statements + + grouping interface-ref-common { + description + "Reference leafrefs to interface / subinterface"; + + leaf interface { + type leafref { + path "/oc-if:interfaces/oc-if:interface/oc-if:name"; + } + description + "Reference to a base interface. If a reference to a + subinterface is required, this leaf must be specified + to indicate the base interface."; + } + + leaf subinterface { + type leafref { + path "/oc-if:interfaces/" + + "oc-if:interface[oc-if:name=current()/../interface]/" + + "oc-if:subinterfaces/oc-if:subinterface/oc-if:index"; + } + description + "Reference to a subinterface -- this requires the base + interface to be specified using the interface leaf in + this container. If only a reference to a base interface + is requuired, this leaf should not be set."; + } + } + + grouping interface-ref-state-container { + description + "Reusable opstate w/container for a reference to an + interface or subinterface"; + + container state { + config false; + description + "Operational state for interface-ref"; + + uses interface-ref-common; + } + } + + grouping interface-ref { + description + "Reusable definition for a reference to an interface or + subinterface"; + + container interface-ref { + description + "Reference to an interface or subinterface"; + + container config { + description + "Configured reference to interface / subinterface"; + + uses interface-ref-common; + } + + uses interface-ref-state-container; + } + } + + grouping interface-ref-state { + description + "Reusable opstate w/container for a reference to an + interface or subinterface"; + + container interface-ref { + description + "Reference to an interface or subinterface"; + + uses interface-ref-state-container; + } + } + + grouping base-interface-ref-state { + description + "Reusable opstate w/container for a reference to a + base interface (no subinterface)."; + + container state { + config false; + description + "Operational state for base interface reference"; + + leaf interface { + type base-interface-ref; + description + "Reference to a base interface."; + } + } + } + + + grouping interface-common-config { + description + "Configuration data data nodes common to physical interfaces + and subinterfaces"; + + leaf description { + type string; + description + "A textual description of the interface. + + A server implementation MAY map this leaf to the ifAlias + MIB object. Such an implementation needs to use some + mechanism to handle the differences in size and characters + allowed between this leaf and ifAlias. The definition of + such a mechanism is outside the scope of this document. + + Since ifAlias is defined to be stored in non-volatile + storage, the MIB implementation MUST map ifAlias to the + value of 'description' in the persistently stored + datastore. + + Specifically, if the device supports ':startup', when + ifAlias is read the device MUST return the value of + 'description' in the 'startup' datastore, and when it is + written, it MUST be written to the 'running' and 'startup' + datastores. Note that it is up to the implementation to + + decide whether to modify this single leaf in 'startup' or + perform an implicit copy-config from 'running' to + 'startup'. + + If the device does not support ':startup', ifAlias MUST + be mapped to the 'description' leaf in the 'running' + datastore."; + reference + "RFC 2863: The Interfaces Group MIB - ifAlias"; + } + + leaf enabled { + type boolean; + default "true"; + description + "This leaf contains the configured, desired state of the + interface. + + Systems that implement the IF-MIB use the value of this + leaf in the 'running' datastore to set + IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry + has been initialized, as described in RFC 2863. + + Changes in this leaf in the 'running' datastore are + reflected in ifAdminStatus, but if ifAdminStatus is + changed over SNMP, this leaf is not affected."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + } + + grouping interface-phys-config { + description + "Configuration data for physical interfaces"; + + leaf name { + type string; + description + "The name of the interface. + + A device MAY restrict the allowed values for this leaf, + possibly depending on the type of the interface. + For system-controlled interfaces, this leaf is the + device-specific name of the interface. The 'config false' + list interfaces/interface[name]/state contains the currently + existing interfaces on the device. + + If a client tries to create configuration for a + system-controlled interface that is not present in the + corresponding state list, the server MAY reject + the request if the implementation does not support + pre-provisioning of interfaces or if the name refers to + an interface that can never exist in the system. A + NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case. + + The IETF model in RFC 7223 provides YANG features for the + following (i.e., pre-provisioning and arbitrary-names), + however they are omitted here: + + If the device supports pre-provisioning of interface + configuration, the 'pre-provisioning' feature is + advertised. + + If the device allows arbitrarily named user-controlled + interfaces, the 'arbitrary-names' feature is advertised. + + When a configured user-controlled interface is created by + the system, it is instantiated with the same name in the + /interfaces/interface[name]/state list."; + } + + leaf type { + type identityref { + base ietf-if:interface-type; + } + //mandatory true; + description + "The type of the interface. + + When an interface entry is created, a server MAY + initialize the type leaf with a valid value, e.g., if it + is possible to derive the type from the name of the + interface. + + If a client tries to set the type of an interface to a + value that can never be used by the system, e.g., if the + type is not supported or if the type does not match the + name of the interface, the server MUST reject the request. + A NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf mtu { + type uint16; + description + "Set the max transmission unit size in octets + for the physical interface. If this is not set, the mtu is + set to the operational default -- e.g., 1514 bytes on an + Ethernet interface."; + } + + leaf loopback-mode { + type boolean; + default false; + description + "When set to true, the interface is logically looped back, + such that packets that are forwarded via the interface + are received on the same interface."; + } + + uses interface-common-config; + } + + grouping interface-phys-holdtime-config { + description + "Configuration data for interface hold-time settings -- + applies to physical interfaces."; + + leaf up { + type uint32; + units milliseconds; + default 0; + description + "Dampens advertisement when the interface + transitions from down to up. A zero value means dampening + is turned off, i.e., immediate notification."; + } + + leaf down { + type uint32; + units milliseconds; + default 0; + description + "Dampens advertisement when the interface transitions from + up to down. A zero value means dampening is turned off, + i.e., immediate notification."; + } + } + + grouping interface-phys-holdtime-state { + description + "Operational state data for interface hold-time."; + } + + grouping interface-phys-holdtime-top { + description + "Top-level grouping for setting link transition + dampening on physical and other types of interfaces."; + + container hold-time { + description + "Top-level container for hold-time settings to enable + dampening advertisements of interface transitions."; + + container config { + description + "Configuration data for interface hold-time settings."; + + uses interface-phys-holdtime-config; + } + + container state { + + config false; + + description + "Operational state data for interface hold-time."; + + uses interface-phys-holdtime-config; + uses interface-phys-holdtime-state; + } + } + } + + grouping interface-common-state { + description + "Operational state data (in addition to intended configuration) + at the global level for this interface"; + + leaf ifindex { + type uint32; + description + "System assigned number for each interface. Corresponds to + ifIndex object in SNMP Interface MIB"; + reference + "RFC 2863 - The Interfaces Group MIB"; + } + + leaf admin-status { + type enumeration { + enum UP { + description + "Ready to pass packets."; + } + enum DOWN { + description + "Not ready to pass packets and not in some test mode."; + } + enum TESTING { + //TODO: This is generally not supported as a configured + //admin state, though it's in the standard interfaces MIB. + //Consider removing it. + description + "In some test mode."; + } + } + //TODO:consider converting to an identity to have the + //flexibility to remove some values defined by RFC 7223 that + //are not used or not implemented consistently. + mandatory true; + description + "The desired state of the interface. In RFC 7223 this leaf + has the same read semantics as ifAdminStatus. Here, it + reflects the administrative state as set by enabling or + disabling the interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf oper-status { + type enumeration { + enum UP { + value 1; + description + "Ready to pass packets."; + } + enum DOWN { + value 2; + description + "The interface does not pass any packets."; + } + enum TESTING { + value 3; + description + "In some test mode. No operational packets can + be passed."; + } + enum UNKNOWN { + value 4; + description + "Status cannot be determined for some reason."; + } + enum DORMANT { + value 5; + description + "Waiting for some external event."; + } + enum NOT_PRESENT { + value 6; + description + "Some component (typically hardware) is missing."; + } + enum LOWER_LAYER_DOWN { + value 7; + description + "Down due to state of lower-layer interface(s)."; + } + } + //TODO:consider converting to an identity to have the + //flexibility to remove some values defined by RFC 7223 that + //are not used or not implemented consistently. + mandatory true; + description + "The current operational state of the interface. + + This leaf has the same semantics as ifOperStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifOperStatus"; + } + + leaf last-change { + type oc-types:timeticks64; + units nanoseconds; + description + "This timestamp indicates the absolute time of the last + state change of the interface (e.g., up-to-down transition). + This is different than the SNMP ifLastChange object in the + standard interface MIB in that it is not relative to the + system boot time (i.e,. sysUpTime). + + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf logical { + type boolean; + description + "When set to true, the interface is a logical interface + which does not have an associated physical port or + channel on the system."; + } + } + + + grouping interface-counters-state { + description + "Operational state representing interface counters + and statistics."; + + //TODO: we may need to break this list of counters into those + //that would appear for physical vs. subinterface or logical + //interfaces. For now, just replicating the full stats + //grouping to both interface and subinterface. + + container counters { + description + "A collection of interface-related statistics objects."; + + leaf in-octets { + type oc-yang:counter64; + description + "The total number of octets received on the interface, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; + } + + leaf in-pkts { + type oc-yang:counter64; + description + "The total number of packets received on the interface, + including all unicast, multicast, broadcast and bad packets + etc."; + reference + "RFC 2819: Remote Network Monitoring Management Information + Base"; + } + + leaf in-unicast-pkts { + type oc-yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were not addressed to a + multicast or broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; + } + + leaf in-broadcast-pkts { + type oc-yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a broadcast + address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInBroadcastPkts"; + } + + leaf in-multicast-pkts { + type oc-yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, that were addressed to a multicast + address at this sub-layer. For a MAC-layer protocol, + this includes both Group and Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInMulticastPkts"; + } + + leaf in-discards { + type oc-yang:counter64; + description + "The number of inbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + + + reference + "RFC 2863: The Interfaces Group MIB - ifInDiscards"; + } + + leaf in-errors { + type oc-yang:counter64; + description + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from being + deliverable to a higher-layer protocol. For character- + oriented or fixed-length interfaces, the number of + inbound transmission units that contained errors + preventing them from being deliverable to a higher-layer + protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInErrors"; + } + + leaf in-unknown-protos { + type oc-yang:counter64; + description + "For packet-oriented interfaces, the number of packets + received via the interface that were discarded because + of an unknown or unsupported protocol. For + character-oriented or fixed-length interfaces that + support protocol multiplexing, the number of + transmission units received via the interface that were + discarded because of an unknown or unsupported protocol. + For any interface that does not support protocol + multiplexing, this counter is not present. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; + } + + leaf in-fcs-errors { + type oc-yang:counter64; + description + "Number of received packets which had errors in the + frame check sequence (FCS), i.e., framing errors. + + Discontinuities in the value of this counter can occur + when the device is re-initialization as indicated by the + value of 'last-clear'."; + } + + leaf out-octets { + type oc-yang:counter64; + description + "The total number of octets transmitted out of the + interface, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; + } + + leaf out-pkts { + type oc-yang:counter64; + description + "The total number of packets transmitted out of the + interface, including all unicast, multicast, broadcast, + and bad packets etc."; + reference + "RFC 2819: Remote Network Monitoring Management Information + Base"; + } + + leaf out-unicast-pkts { + type oc-yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and that were not addressed + to a multicast or broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; + } + + leaf out-broadcast-pkts { + type oc-yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and that were addressed to a + broadcast address at this sub-layer, including those + that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutBroadcastPkts"; + } + + + leaf out-multicast-pkts { + type oc-yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and that were addressed to a + multicast address at this sub-layer, including those + that were discarded or not sent. For a MAC-layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutMulticastPkts"; + } + + leaf out-discards { + type oc-yang:counter64; + description + "The number of outbound packets that were chosen to be + discarded even though no errors had been detected to + prevent their being transmitted. One possible reason + for discarding such a packet could be to free up buffer + space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; + } + + leaf out-errors { + type oc-yang:counter64; + description + "For packet-oriented interfaces, the number of outbound + packets that could not be transmitted because of errors. + For character-oriented or fixed-length interfaces, the + number of outbound transmission units that could not be + transmitted because of errors. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'last-clear'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutErrors"; + } + + leaf carrier-transitions { + type oc-yang:counter64; + description + "Number of times the interface state has transitioned + between up and down since the time the device restarted + or the last-clear time, whichever is most recent."; + } + + leaf last-clear { + type oc-types:timeticks64; + units nanoseconds; + description + "Timestamp of the last time the interface counters were + cleared. + + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + } + } + + // data definition statements + + grouping sub-unnumbered-config { + description + "Configuration data for unnumbered subinterfaces"; + + leaf enabled { + type boolean; + default false; + description + "Indicates that the subinterface is unnumbered. By default + the subinterface is numbered, i.e., expected to have an + IP address configuration."; + } + } + + grouping sub-unnumbered-state { + description + "Operational state data unnumbered subinterfaces"; + } + + grouping sub-unnumbered-top { + description + "Top-level grouping unnumbered subinterfaces"; + + container unnumbered { + description + "Top-level container for setting unnumbered interfaces. + Includes reference the interface that provides the + address information"; + + container config { + description + "Configuration data for unnumbered interface"; + + uses sub-unnumbered-config; + } + + container state { + + config false; + + description + "Operational state data for unnumbered interfaces"; + + uses sub-unnumbered-config; + uses sub-unnumbered-state; + } + + uses oc-if:interface-ref; + } + } + + grouping subinterfaces-config { + description + "Configuration data for subinterfaces"; + + leaf index { + type uint32; + default 0; + description + "The index of the subinterface, or logical interface number. + On systems with no support for subinterfaces, or not using + subinterfaces, this value should default to 0, i.e., the + default subinterface."; + } + + uses interface-common-config; + + } + + grouping subinterfaces-state { + description + "Operational state data for subinterfaces"; + + leaf name { + type string; + description + "The system-assigned name for the sub-interface. This MAY + be a combination of the base interface name and the + subinterface index, or some other convention used by the + system."; + } + + uses interface-common-state; + uses interface-counters-state; + } + + grouping subinterfaces-top { + description + "Subinterface data for logical interfaces associated with a + given interface"; + + container subinterfaces { + description + "Enclosing container for the list of subinterfaces associated + with a physical interface"; + + list subinterface { + key "index"; + + description + "The list of subinterfaces (logical interfaces) associated + with a physical interface"; + + leaf index { + type leafref { + path "../config/index"; + } + description + "The index number of the subinterface -- used to address + the logical interface"; + } + + container config { + description + "Configurable items at the subinterface level"; + + uses subinterfaces-config; + } + + container state { + + config false; + description + "Operational state data for logical interfaces"; + + uses subinterfaces-config; + uses subinterfaces-state; + } + } + } + } + + grouping interfaces-top { + description + "Top-level grouping for interface configuration and + operational state data"; + + container interfaces { + description + "Top level container for interfaces, including configuration + and state data."; + + + list interface { + key "name"; + + description + "The list of named interfaces on the device."; + + leaf name { + type string; + //type leafref { + // path "../config/name"; + //} + description + "References the configured name of the interface"; + //TODO: need to consider whether this should actually + //reference the name in the state subtree, which + //presumably would be the system-assigned name, or the + //configured name. Points to the config/name now + //because of YANG 1.0 limitation that the list + //key must have the same "config" as the list, and + //also can't point to a non-config node. + } + + container config { + description + "Configurable items at the global, physical interface + level"; + + uses interface-phys-config; + } + + container state { + + config false; + description + "Operational state data at the global interface level"; + + uses interface-phys-config; + uses interface-common-state; + uses interface-counters-state; + } + + uses interface-phys-holdtime-top; + uses subinterfaces-top; + } + } + } + + uses interfaces-top; + + +} diff --git a/src/plugins/yang/openconfig/openconfig-isis-lsdb-types.yang b/src/plugins/yang/openconfig/openconfig-isis-lsdb-types.yang new file mode 100644 index 0000000..5e53fd4 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-isis-lsdb-types.yang @@ -0,0 +1,686 @@ +module openconfig-isis-lsdb-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/isis-lsdb-types"; + + prefix "oc-isis-lsdb-types"; + + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains general LSDB type definitions for use in + ISIS YANG model. "; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-05-14" { + description + "Update LSDB model to correct Extended IS reach TLV + bug. This change is backwards incompatible due to + adding an additional level of hierarchy to support + multiple instances of the TLV."; + reference "0.4.0"; + } + + revision "2017-07-26" { + description + "Update LSDB and fix bugs."; + reference "0.3.2"; + } + + revision "2017-05-15" { + description + "Refactor LSDB."; + reference "0.3.0"; + } + + revision "2017-01-13" { + description + "Remove top-level /isis container"; + reference "0.2.1"; + } + + revision "2016-12-15" { + description + "Add segment routing to IS-IS module"; + reference "0.2.0"; + } + + revision "2016-10-18" { + description + "Initial revision of IS-IS models."; + reference "0.1.0"; + } + + identity ISIS_TLV_TYPE { + description + "Base identity for an ISIS TLV type."; + } + + identity ISIS_SUBTLV_TYPE { + description + "Base identity for an ISIS SUB-TLV type."; + } + + identity IS_REACHABILITY_SUBTLVS_TYPE { + base "ISIS_SUBTLV_TYPE"; + description + "Base identity for an ISIS TLV 22, 23, 222, 223, 141 SUB-TLV + type."; + } + + identity IP_REACHABILITY_SUBTLVS_TYPE { + base "ISIS_SUBTLV_TYPE"; + description + "Base identity for an ISIS TLV 135, 235, 236, 237 SUB-TLV + type."; + } + + identity ROUTER_CAPABILITY_SUBTLVS_TYPE { + base "ISIS_SUBTLV_TYPE"; + description + "Base identity for an ISIS TLV 242 SUB-TLV type."; + } + + identity AREA_ADDRESSES { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 1. Intermediate System to Intermediate System Intra- + Domain Routeing Exchange Protocol for use in Conjunction with + the Protocol for Providing the Connectionless-mode Network + Service (ISO 8473), International Standard 10589: 2002, Second + Edition, 2002."; + reference + "ISO 10589"; + } + + identity IIS_NEIGHBORS { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 2. Intermediate System to Intermediate System Intra- + Domain Routeing Exchange Protocol for use in Conjunction with + the Protocol for Providing the Connectionless-mode Network + Service (ISO 8473), International Standard 10589: 2002, Second + Edition, 2002."; + reference + "ISO 10589"; + } + + identity INSTANCE_ID { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 7. An Instance Identifier (IID) to uniquely + identify an IS-IS instance. When the IID = 0, the list of + supported ITIDs MUST NOT be present. An IID-TLV with IID = 0 + MUST NOT appear in an SNP or LSP. When the TLV appears (with a + non-zero IID) in an SNP or LSP, exactly one ITID. MUST be + present indicating the topology with which the PDU is + associated. If no ITIDs or multiple ITIDs are present or the + IID is zero, then the PDU MUST be ignored"; + reference + "RFC6822: IS-IS Multi-Instance"; + } + + identity AUTHENTICATION { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 10.Intermediate System to Intermediate System Intra- + Domain Routeing Exchange Protocol for use in Conjunction with + the Protocol for Providing the Connectionless-mode Network + Service (ISO 8473) International Standard 10589: 2002, Second + Edition, 2002."; + reference + "ISO 10589"; + } + + identity PURGE_OI { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 13. If an IS generates a purge, it SHOULD include + this TLV in the purge with its own system ID. If an IS + receives a purge that does not include this TLV, then it SHOULD + add this TLV with both its own system ID and the system ID of + the IS from which it received the purge. This allows ISs + receiving purges to log the system ID of the originator, or the + upstream source of the purge."; + reference + "RFC6232: Purge Originator Identification TLV"; + } + + identity LSP_BUFFER_SIZE { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 14. The maximum MTU that the advertising system can + receive, expressed in bytes."; + reference + "ISO 10589: LSP Buffer Size TLV"; + } + + identity EXTENDED_IS_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 22. An extended IS reachability TLV that has a + different data structure to TLV 2 that introduces the use of + sub-TLV object-group."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering"; + } + + identity IS_NEIGHBOR_ATTRIBUTE { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 23. Identical in format to TLV 22 and included in + Original LSPs or Extended LSPs. Regardless of the type of LSP + in which the TLVs appear, the information pertains to the + neighbor relationship between the Originating System and the IS + identified in the TLV"; + reference + "RFC5311: Simplified Extension of Link State PDU (LSP) Space + for IS-IS"; + } + + identity ISIS_ALIAS_ID { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 24. IS-Alias TLV which extension-capable ISs to + recognize the Originating System of an Extended LSP set. It + identifies the Normal system-id of the Originating System"; + reference + "RFC5311: Simplified Extension of Link State PDU (LSP) Space + for IS-IS"; + } + + identity IPV4_INTERNAL_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 128. TLV defines IP addresses within the routing + domain reachable directly via one or more interfaces on this + Intermediate system"; + reference + "RFC1195: OSI ISIS for IP and Dual Environments. RFC5302: + Domain-Wide Prefix Distribution with Two-Level IS-IS"; + } + + identity NLPID { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 129. TLV defines the set Network Layer Protocol + Identifiers for Network Layer protocols that this Intermediate + System is capable of relaying"; + reference + "RFC1195: Use of OSI IS-IS for Routing in TCP/IP and + Dual Environments"; + } + + identity IPV4_EXTERNAL_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 130. TLV defines IP addresses outside the routing + domain reachable via interfaces on this Intermediate system. + This is permitted to appear multiple times, and in an LSP with + any LSP number. However, this field must not appear in + pseudonode LSPs"; + reference " + RFC1195: OSI ISIS for IP and Dual Environments. RFC5302: + Domain-Wide Prefix Distribution with Two-Level IS-IS"; + } + + identity IPV4_INTERFACE_ADDRESSES { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 132. The IP address of one or more interfaces + corresponding to the SNPAs enabled on this Intermediate system + (i.e., one or more IP addresses of this router). This is + permitted to appear multiple times, and in an LSP with any LSP + number."; + reference + "RFC1195: Use of OSI IS-IS for Routing in TCP/IP and Dual + Environments"; + } + + identity IPV4_TE_ROUTER_ID { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 134. Traffic Engineering router ID TLV that contains + the 4-octet router ID of the router originating the LSP"; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering"; + } + + identity EXTENDED_IPV4_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 135. Extended IP reachability TLV that provides for a + 32-bit metric and adds one bit to indicate that a prefix has + been redistributed _down_ in the hierarchy"; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering"; + } + + identity DYNAMIC_NAME { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 137. The Dynamic hostname TLV is optional. This TLV + may be present in any fragment of a non-pseudonode LSP. The + value field identifies the symbolic name of the router + originating the LSP. This symbolic name can be the FQDN for the + router, it can be a subset of the FQDN, or it can be any string + operators want to use for the router."; + reference + "RFC6233: IS-IS Registry Extension for Purges, RFC 5301: Dynamic + Hostname Exchange Mechanism for IS-IS."; + } + + identity IPV4_SRLG { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 138. IPv4 Shared Risk Link Group TLV"; + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS)"; + } + + identity IPV6_SRLG { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 139. IPv6 Shared Risk Link Group"; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS"; + } + + identity IPV6_TE_ROUTER_ID { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 140. The IPv6 TE Router ID TLV contains a 16-octet + IPv6 address. A stable global IPv6 address MUST be used, so that + the router ID provides a routable address, regardless of the + state of a node's interfaces. If a router does not implement + traffic engineering, it MAY include or omit the IPv6 TE Router + ID TLV. If a router implements traffic engineering for IPv6, it + MUST include this TLV in its LSP. This TLV MUST NOT be included + more than once in an LSP."; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS."; + } + + identity MT_ISN { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 222. TLV is aligned with extended IS reachability TLV + type 22 beside an additional two bytes in front at the beginning + of the TLV that. indicate MT membership."; + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in Intermediate + System to Intermediate Systems (IS-ISs)"; + } + + identity MT_IS_NEIGHBOR_ATTRIBUTE { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 223. Is is identical in format to TLV 222. In the + event that there is a need to advertise in Extended LSPs such + information associated with neighbors of the Originating System, + it is necessary to define new TLVs to carry the sub-TLV + information."; + reference + "RFC5311: Simplified Extension of Link State PDU (LSP) Space for + IS-IS"; + } + + identity MULTI_TOPOLOGY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 229. This MT TLV can advertise up to 127 MTs. It is + announced in IIHs and LSP fragment 0, and can occur multiple + times. The resulting MT set SHOULD be the union of all the MT + TLV occurrences in the packet. Any other IS-IS PDU occurrence of + this TLV MUST be ignored. Lack of MT TLV in hellos and fragment + zero LSPs MUST be interpreted as participation of the + advertising interface or router in MT ID #0 only. If a router + advertises MT TLV, it has to advertise all the MTs it + participates in, specifically including topology ID #0 also."; + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in Intermediate + System to Intermediate Systems (IS-ISs)"; + } + + identity IPV6_INTERFACE_ADDRESSES { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 232. IPv6 Interface Address TLV that maps directly to + the IP Interface Address TLV in [RFC1195]. We necessarily modify + the contents to be 0-15 16-octet IPv6 interface addresses + instead of 0-63 4-octet IPv4 interface addresses"; + reference "RFC5308: Routing IPv6 with IS-IS."; + } + + identity MT_IPV4_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 235. TLV is aligned with extended IP reachability TLV + type 135 beside an additional two bytes in front to indicate MT + membership"; + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in Intermediate + System to Intermediate Systems (IS-ISs)"; + } + + identity IPV6_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 236. The IPv6 Reachability TLV describes network + reachability through the specification of a routing prefix, + metric information, a bit to indicate if the prefix is being + advertised down from a higher level, a bit to indicate if the + prefix is being distributed from another routing protocol, and + OPTIONALLY the existence of Sub-TLVs to allow for later + extension."; + reference + "RFC5308: Routing IPv6 with IS-IS"; + } + + identity MT_IPV6_REACHABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 237. TLV is aligned with IPv6 Reachability TLV type + 236 beside an additional two bytes in front to indicate MT + membership."; + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in Intermediate + System to Intermediate Systems (IS-ISs)."; + } + + identity ROUTER_CAPABILITY { + base "ISIS_TLV_TYPE"; + description + "ISIS TLV 242. IS-IS TLV named CAPABILITY, formed of multiple + sub-TLVs, which allows a router to announce its capabilities + within an IS-IS level or the entire routing domain."; + reference + "RFC4971: Intermediate System to Intermediate System (IS-IS) + Extensions for Advertising Router Information."; + } + + //sub-TLVs for TLVs 22, 23, 141, 222, 223 + + identity IS_REACHABILITY_ADMIN_GROUP { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 3. Administrative group(color)."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering"; + } + + identity IS_REACHABILITY_LINK_ID { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 4. Link Local/Remote Identifiers."; + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS)"; + } + + identity IS_REACHABILITY_IPV4_INTERFACE_ADDRESS { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 6. IPv4 Interface Address."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering."; + } + + identity IS_REACHABILITY_IPV4_NEIGHBOR_ADDRESS { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 8. IPv4 Neighbor Address."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering."; + } + + identity IS_REACHABILITY_MAX_LINK_BANDWIDTH { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 9. Maximum Link Bandwidth."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering."; + } + + identity IS_REACHABILITY_MAX_RESERVABLE_BANDWIDTH { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 10. Maximum Reservable Bandwidth."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering."; + } + + identity IS_REACHABILITY_UNRESERVED_BANDWIDTH { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 11. Unreserved bandwidth."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering."; + } + + identity IS_REACHABILITY_IPV6_INTERFACE_ADDRESS { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 12. IPv6 Interface Address."; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS."; + } + + identity IS_REACHABILITY_IPV6_NEIGHBOR_ADDRESS { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 13. IPv6 Neighbor Address."; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS."; + } + + identity IS_REACHABILITY_EXTENDED_ADMIN_GROUP { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 14. Extended Administrative Group."; + reference + "RFC7308: Extended Administrative Groups in MPLS Traffic + Engineering (MPLS-TE)."; + } + + identity IS_REACHABILITY_TE_DEFAULT_METRIC { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 18. TE Default Metric."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering."; + } + + identity IS_REACHABILITY_LINK_ATTRIBUTES { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 19. Link Attributes."; + reference + "RFC5209: Definition of an IS-IS Link Attribute Sub-TLV."; + } + + identity IS_REACHABILITY_LINK_PROTECTION_TYPE { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 20. Link Protection Type."; + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS)"; + } + + identity IS_REACHABILITY_BANDWIDTH_CONSTRAINTS { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 22. Bandwidth Constraints."; + reference + "RFC4124: Protocol Extensions for Support of Diffserv-aware MPLS + Traffic Engineering."; + } + + identity IS_REACHABILITY_UNCONSTRAINED_LSP { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 23. Unconstrained LSP."; + reference + "RFC5330: A Link-Type sub-TLV to Convey the Number of Traffic + Engineering Label Switched Paths Signalled with Zero + Reserved Bandwidth across a Link."; + } + + identity IS_REACHABILITY_ADJ_SID { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 31. Adjacency Segment Identifier."; + reference + "draft-ietf-isis-segment-routing-extensions."; + } + + identity IS_REACHABILITY_ADJ_LAN_SID { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 32. Adjacency LAN Segment Identifier."; + reference + "draft-ietf-isis-segment-routing-extensions."; + } + + identity IS_REACHABILITY_LINK_DELAY { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 33. Unidirectional Link Delay."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + identity IS_REACHABILITY_MIN_MAX_LINK_DELAY { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 34. Min/Max Unidirectional Link Delay."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + identity IS_REACHABILITY_LINK_DELAY_VARIATION { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 35. Unidirectional Link Delay Variation."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + identity IS_REACHABILITY_LINK_LOSS { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 36. Unidirectional Link Loss Delay."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + identity IS_REACHABILITY_RESIDUAL_BANDWIDTH { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 37. Unidirectional Residual Bandwidth."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + identity IS_REACHABILITY_AVAILABLE_BANDWIDTH { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 38. Unidirectional Available Bandwidth."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + identity IS_REACHABILITY_UTILIZED_BANDWIDTH { + base "IS_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 39. Unidirectional Utilized Bandwidth."; + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric Extensions."; + } + + //sub-TLVs for TLVs 135, 235, 236, 237 + identity IP_REACHABILITY_TAG { + base "IP_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 1. 32-bit Administrative Tag."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 and IPv6 + Reachability."; + } + + identity IP_REACHABILITY_TAG64 { + base "IP_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 2. 64-bit Administrative Tag."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 and IPv6 + Reachability."; + } + + identity IP_REACHABILITY_PREFIX_SID { + base "IP_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 3. Prefix Segment Identifier."; + reference + "draft-ietf-isis-segment-routing-extension."; + } + + identity IP_REACHABILITY_PREFIX_FLAGS { + base "IP_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 4. Prefix Attribute Flags."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 and IPv6 + Reachability."; + } + + identity IP_REACHABILITY_IPV4_ROUTER_ID { + base "IP_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 11. IPv4 Source Router ID."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 and IPv6 + Reachability."; + } + + identity IP_REACHABILITY_IPV6_ROUTER_ID { + base "IP_REACHABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 12. IPv6 Source Router ID."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 and IPv6 + Reachability."; + } + + + //sub-TLVs for TLVs 242 + + identity ROUTER_CAPABILITY_SR_CAPABILITY { + base "ROUTER_CAPABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 2. Segment Routing Capability."; + reference + "draft-ietf-isis-segment-routing-extensions."; + } + + identity ROUTER_CAPABILITY_SR_ALGORITHM { + base "ROUTER_CAPABILITY_SUBTLVS_TYPE"; + description + "sub-TLV 19. Segment Routing Algorithm."; + reference + "draft-ietf-isis-segment-routing-extensions."; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-isis-lsp.yang b/src/plugins/yang/openconfig/openconfig-isis-lsp.yang new file mode 100644 index 0000000..02f8b79 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-isis-lsp.yang @@ -0,0 +1,3592 @@ +submodule openconfig-isis-lsp { + + belongs-to openconfig-isis { + prefix oc-isis; + } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-inet-types { prefix "inet"; } + import openconfig-isis-types { prefix "oc-isis-types"; } + import openconfig-isis-lsdb-types { prefix "oc-isis-lsdb-types"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-mpls-types { prefix "oc-mpls-types"; } + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net "; + + description + "This sub-module describes a YANG model for the IS-IS Link State + Database (LSDB). + + Portions of this code were derived from IETF RFCs relating to the + IS-IS protocol. + Please reproduce this note if possible. + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-05-14" { + description + "Update LSDB model to correct Extended IS reach TLV + bug. This change is backwards incompatible due to + adding an additional level of hierarchy to support + multiple instances of the TLV."; + reference "0.4.0"; + } + + revision "2017-07-26" { + description + "Update LSDB and fix bugs."; + reference "0.3.2"; + } + + revision "2017-05-15" { + description + "Refactor LSDB."; + reference "0.3.0"; + } + + revision "2017-01-13" { + description + "Remove top-level /isis container"; + reference "0.2.1"; + } + + revision "2016-12-15" { + description + "Add segment routing to IS-IS module"; + reference "0.2.0"; + } + + revision "2016-10-18" { + description + "Initial revision of IS-IS models."; + reference "0.1.0"; + } + + typedef isis-metric-flags { + type enumeration { + enum INTERNAL { + description + "When this flag is not set, internal metrics are in use."; + } + enum UNSUPPORTED { + description + "When this flag (referred to as the S-bit) is set, then + the metric is unsupported."; + } + } + description + "Type definition for flags used in IS-IS metrics"; + } + + grouping isis-lsdb-link-characteristics-a-bit { + description + "Definition of the A bit, as used in IS-IS link delay TLVs."; + + leaf a-bit { + type boolean; + description + "The A bit is set when the measured value of this parameter + exceeds its configured maximum threshold. The A bit is cleared + when the measured value falls below its configured reuse + threshold."; + } + } + + grouping isis-lsdb-tlv-nlpid-state { + description + "NLP ID parameters for IS-IS."; + + leaf-list nlpid { + type enumeration { + enum IPV4 { + description "IPv4 Address family."; + } + enum IPV6 { + description "IPv6 Address family."; + } + } + description + "Protocol supported. IPv4 is defined as (0xcc) and IPv6 - + (0x8e)"; + reference + "RFC1195: Use of OSI IS-IS for Routing in TCP/IP and + Dual Environments. TLV 129. "; + } + } + + grouping isis-lsdb-subtlv-type-state { + description + "Per-subTLV type operational state parameters for ISIS."; + + leaf type { + type identityref { + base oc-isis-lsdb-types:ISIS_SUBTLV_TYPE; + } + description + "The type of subTLV being described. The type of subTLV is + expressed as a canonical name."; + } + } + + grouping isis-lsdb-tlv-type-state { + description + "Per-subTLV type operational state parameters for ISIS."; + + leaf type { + type identityref { + base oc-isis-lsdb-types:ISIS_TLV_TYPE; + } + description + "The type of TLV being described. The type of TLV is + expressed as a canonical name."; + } + } + + grouping is-reachability-neighbor-state { + description + "This grouping defines is-reachability neighbor."; + + container subtlvs { + description + "This container describes IS Neighbor sub-TLVs."; + + list subtlv { + key "type"; + + description + "List of subTLV types in the LSDB for the specified TLV."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the sub-TLV type."; + } + + container state { + description + "State parameters of IS neighbor state"; + + uses isis-lsdb-subtlv-type-state; + } + + container admin-group { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_ADMIN_GROUP'" { + description + "Only include the administrative group container when + the sub-TLV is type 3"; + } + description + "This container defines sub-TLV 3."; + + container state { + description + "State parameters of sub-TLV 3."; + + leaf-list admin-group { + type uint32; + description + "The administrative group sub-TLV contains a 4-octet + bit mask assigned by the network administrator. Each + set bit corresponds to one administrative group + assigned to the interface. By convention, the least + significant bit is referred to as group 0, and the + most significant bit is referred to as group 31."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. + sub-TLV 3: TLV 22,23,141,222, 223."; + } + } + } + + container link-id { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_LINK_ID'" { + description + "Only include the link identifier container when the + sub-TLV is type 4"; + } + description + "This container defines sub-TLV 4."; + + container state { + description + "State parameters of sub-TLV 4."; + + leaf local { + type uint32; + description + "The value field of this sub-TLV contains 4 octets of + Link Local Identifier followed by 4 octets of Link + Remote Identifier."; + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS). sub-TLV 3: TLV + 22,23,141,222, 223."; + } + + leaf remote { + type uint32; + description + "If the Link Remote Identifier is unknown, it is set + to 0."; + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS). sub-TLV 3: TLV + 22,23,141,222, 223."; + } + } + } + + container ipv4-interface-address { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_IPV4_INTERFACE_ADDRESS'" { + description + "Only include the IPv4 interface address group container + when the sub-TLV is type 6"; + } + description + "This container defines sub-TLV 6."; + + container state { + description + "State parameters of sub-TLV 6."; + + leaf-list address { + type inet:ipv4-address; + description + "A 4-octet IPv4 address for the interface described by + the (main) TLV. This sub-TLV can occur multiple + times."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. + sub-TLV 6: TLV 22,23,41,222,223."; + } + } + } + + container ipv4-neighbor-address { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_IPV4_NEIGHBOR_ADDRESS'" { + description + "Only include the IPv4 neighbor address container when + the sub-TLV is type 8."; + } + description + "This container defines sub-TLV 8."; + + container state { + description + "State parameters of sub-TLV 8."; + + leaf-list address { + type inet:ipv4-address; + description + "A single IPv4 address for a neighboring router on + this link. This sub-TLV can occur multiple times."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. + sub-TLV 8: TLV 22,23, 141,222,223."; + } + } + } + + container max-link-bandwidth { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_MAX_LINK_BANDWIDTH'" { + description + "Only include the maximum link bandwidth container when + the sub-TLV is type 9."; + } + description + "This container defines sub-TLV 9."; + + container state { + description + "State parameters of sub-TLV 9."; + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The maximum bandwidth that can be used on this link + in this direction (from the system originating the LSP + to its neighbors). It is encoded in 32 bits in IEEE + floating point format. The units are bytes (not + bits!) per second."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. + sub-TLV 9: TLV 22,23,141,222,223."; + } + } + } + + container max-reservable-link-bandwidth { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_MAX_RESERVABLE_BANDWIDTH'" { + description + "Only include the maximum reservable link bandwidth + container when the sub-TLV type is 10."; + } + description + "This container defines sub-TLV 10."; + + container state { + description + "State parameters of sub-TLV 10."; + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The maximum amount of bandwidth that can be reserved + in this direction on this link. Note that for + oversubscription purposes, this can be greater than + the bandwidth of the link. It is encoded in 32 bits + in IEEE floating point format. The units are bytes + (not bits!) per second."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. + Sub-TLV 10: TLV 22,23,141,222,223."; + } + } + } + + container unreserved-bandwidth { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_UNRESERVED_BANDWIDTH'" { + description + "Only include the unreserved bandwidth container when + the sub-TLV type is 11."; + } + description + "This container defines unreserved-bandwidth. The units + are bytes per second."; + + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. sub- + TLV 11: TLV 22,23,141,222,223"; + + list setup-priority { + key "priority"; + + leaf priority { + type leafref { + path "../state/priority"; + } + description + "Reference to the setup priority to which the + unreserved bandwidth corresponds."; + } + + description + "Setup priority (0 through 7) for unreserved + bandwidth."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 11."; + + leaf priority { + type uint8 { + range "0..7"; + } + description + "Setup priority level of 0 through 7 to be used by + Unreserved Bandwidth sub-TLV 11."; + } + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The amount of bandwidth reservable in this + direction on this link. Note that for + oversubscription purposes, this can be greater than + the bandwidth of the link. It contains eight 32-bit + IEEE floating point numbers(one for each priority). + The units are bytes (not bits!) per second. The + values correspond to the bandwidth that can be + reserved with a setup priority of 0 through 7, + arranged in increasing order with priority 0 + occurring at the start of the sub-TLV, and priority + 7 at the end of the sub-TLV."; + } + } + } + } + + container ipv6-interface-address { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_IPV6_INTERFACE_ADDRESS'" { + description + "Only include the IPv6 interface address when the + sub-TLV type is 12."; + } + description + "This container defines sub-TLV 12."; + + container state { + description + "State parameters of sub-TLV 12."; + + leaf-list address { + type inet:ipv6-address; + description + "Contains a 16-octet IPv6 address for the interface + described by the containing Extended IS Reachability + TLV. This sub-TLV can occur multiple times."; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS. sub-TLV + 12: TLV 22,23,141,222,223."; + } + } + } + + container ipv6-neighbor-address { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_IPV6_NEIGHBOR_ADDRESS'" { + description + "Only include the IPv6 neighbor address when the + sub-TLV type is 13."; + } + description + "This container defines sub-TLV 13."; + + container state { + description + "State parameters of sub-TLV 13."; + + leaf-list address { + type inet:ipv6-address; + description + "Contains a 16-octet IPv6 address for a neighboring + router on the link described by the (main) TLV. This + sub-TLV can occur multiple times."; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS. sub-TLV + 13: ISIS TLV 22,23,141,222,223."; + } + } + } + + container extended-admin-group { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_EXTENDED_ADMIN_GROUP'" { + description + "Only include the extended admin group when the + sub-TLV type is 14."; + } + description + "This container defines sub-TLV 14."; + container state { + description + "State parameters of sub-TLV 14."; + + leaf-list extended-admin-group { + type uint32; + description + "The extended-admin-group sub-TLV is used in addition + to the Administrative Groups when it is desirable to + make more than 32 colors available for advertisement + in a network."; + reference + "RFC7308: Extended Administrative Groups in MPLS + Traffic Engineering (MPLS-TE). sub-TLV 14: TLV + 22,23,141,222,223."; + } + } + } + + container te-default-metric { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_TE_DEFAULT_METRIC'" { + description + "Only include the default traffic engineering metric + container when the sub-TLV type is 18."; + } + description + "This container defines sub-TLV 18."; + container state { + description + "State parameters of sub-TLV 18."; + + leaf metric { + type uint32; + description + "This metric is administratively assigned and can be + used to present a differently weighted topology to + traffic engineering SPF calculations. To preclude + overflow within a traffic engineering SPF + implementation, all metrics greater than or equal to + MAX_PATH_METRIC SHALL be considered to have a metric + of MAX_PATH_METRIC."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. + sub-TLV 18: TLV 22,23,141,222,223."; + } + } + } + + container link-attributes { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_LINK_ATTRIBUTES'" { + description + "Only include the link attributes container when the + sub-TLV is type 19."; + } + description + "This container defines link-attributes."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 19."; + + leaf-list local-protection { + type enumeration { + enum LOCAL_PROTECTION { + description + "If set, local protection is available for the + link."; + } + enum LINK_EXCLUDED { + description + "If set, the link is excluded from local + protection."; + } + } + description + "Link local-protection attributes."; + + reference + "RFC5029: Definition of an IS-IS Link Attribute Sub- + TLV. TLV 22, sub-TLV 19."; + } + } + } + + container link-protection-type { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_LINK_PROTECTION_TYPE'" { + description + "Only include the link protection type container when + the sub-TLV type 20."; + } + description + "ISIS LSDB parameters relating to the type of link + protection offered."; + + container state { + description + "State parameters of sub-TLV 20."; + + leaf-list type { + type enumeration { + enum EXTRA_TRAFFIC { + description + "If set the link has extra traffic protection. If + the link is of type Extra Traffic, it means that + the link is protecting another link or links. The + LSPs on a link of this type will be lost if any of + the links it is protecting fail."; + } + enum UNPROTECTED { + description + "If set, the link is unprotected. If the link is + of type Unprotected, it means that there is no + other link protecting this link. The LSPs on a + link of this type will be lost if the link + fails."; + } + enum SHARED { + description + "If set, the link has shared protection. If the + link is of type Shared, it means that there are + one or more disjoint links of type Extra Traffic + that are protecting this link. These Extra + Traffic links are shared between one or more links + of type Shared."; + } + enum ONE_ONE { + description + "If set, the link has dedicated 1:1 protection. If + the link is of type Dedicated 1:1, it means that + there is one dedicated disjoint link of type Extra + Traffic that is protecting this link."; + } + enum PLUS_ONE { + description + "If set, the link has dedicated 1+1 protection. If + the link is of type Dedicated 1+1, it means that a + dedicated disjoint link is protecting this link. + However, the protecting link is not advertised in + the link state database and is therefore not + available for the routing of LSPs."; + } + enum ENHANCED { + description + "If set the link has enhanced protection. If the + link is of type Enhanced, it means that a + protection scheme that is more reliable than + Dedicated 1+1, e.g., 4 fiber BLSR/MS-SPRING, is + being used to protect this link."; + } + } + description + "Link protection capabilities."; + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS). sub-TLV 20: + TLV 22,23,141,222,223."; + } + } + } + + container bandwidth-constraints { + when "../state/type =" + + "'oc-isis-lsdb-types:IS_REACHABILITY_BANDWIDTH_CONSTRAINTS'" { + description + "Only include the bandwidth constraints container when + the sub-TLV is type 22."; + } + description + "This container defines bandwidth-constraints. For DS-TE, + the existing Maximum Reservable link bandwidth parameter + is retained, but its semantics is generalized and + interpreted as the aggregate bandwidth constraint across + all Class-Types"; + + reference + "RFC4124: Protocol Extensions for Support of Diffserv- + aware MPLS Traffic Engineering. sub-TLV 22: TLV 22, 23, + 141, 222,223"; + + list bandwidth-constraint { + key "model-id"; + + description + "List of the Bandwidth Constraints sub-TLV instances + present in the TLV."; + + leaf model-id { + type leafref { + path "../state/model-id"; + } + description + "Reference to the model ID associated with the + instance of the Bandwidth Constraints sub-TLV."; + } + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 22."; + + leaf model-id { + type uint8; + description + "Identifier for the Bandwidth Constraints Model + currently in use by the LSR initiating the IGP + advertisement."; + } + } + + container constraints { + description + "Constraints contained within the Bandwidth + Constraints sub-TLV"; + + list constraint { + key "constraint-id"; + + description + "List of the constraints within the Bandwidth + Constraints sub-TLV. The BC0 level is indicated by + the constraint-id leaf being set to 0, with BCN + being indicated by constraint-id N."; + + leaf constraint-id { + type leafref { + path "../state/constraint-id"; + } + description + "Reference to the unique ID for the BCN level."; + } + + container state { + description + "Operational state parameters of the BCN level"; + + leaf constraint-id { + type uint32; + description + "Unique reference for the bandwidth constraint level. BC0 + is indicated by this leaf being set to zero, with BCN + represented by this leaf being set to N."; + } + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The bandwidth constraint, expressed as a 32-bit IEEE + floating point number expressed in bytes per second."; + } + } + } + } + } + } + + container unconstrained-lsp { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_UNCONSTRAINED_LSP'" { + description + "Only include the unconstrained LSP container when the + sub-TLV is type 23."; + } + description + "This container defines sub-TLV 23."; + container state { + description + "State parameters of sub-TLV 23."; + + uses isis-lsdb-subtlv-type-state; + + leaf count { + type uint16; + description + "Unconstrained TE LSP count(TE Label Switched Paths + (LSPs) signalled with zero bandwidth)."; + reference + "RFC5330: A Link-Type sub-TLV to Convey the Number of + Traffic Engineering Label Switched Paths Signalled + with Zero Reserved Bandwidth across a Link. sub-TLV + 23: TLV 22,23,141,222,223"; + } + } + } + + container adjacency-sids { + when "../state/type = 'oc-isis-lsdb-types:IS_REACHABILITY_ADJ_SID'" { + description + "Only include the adjacency SIDs container when the + sub-TLV type is 31"; + } + + description + "This container defines segment routing adjacency SIDs."; + + list adjacency-sid { + key "value"; + + description + "Adjacency Segment-IDs List. An IGP-Adjacency Segment is + an IGP segment attached to a unidirectional adjacency or + a set of unidirectional adjacencies. By default, an IGP- + Adjacency Segment is local to the node which advertises + it."; + + leaf value { + type leafref { + path "../state/value"; + } + description + "Reference to the value of the Adjacency-SID."; + } + + container state { + description + "State parameters of Adjacency-SID."; + + leaf value { + type uint32; + description + "Adjacency-SID value."; + } + + leaf-list flags { + type enumeration { + enum ADDRESS_FAMILY { + description + "Address-family flag. When unset, the Adj-SID + refers to an adjacency with outgoing IPv4 + encapsulation. If set then the Adj-SID refers to + an adjacency with outgoing IPv6 encapsulation."; + } + enum BACKUP { + description + "Backup flag. When set, the Adj-SID refers to an + adjacency being protected (e.g.: using IPFRR or + MPLS-FRR)."; + } + enum VALUE { + description + "Value flag. When set, the SID carries a value + (instead of an index). By default the flag is + SET."; + } + enum LOCAL { + description + "Local flag. When set, the value/index carried + by the SID has local significance. By default + the flag is SET."; + } + enum SET { + description + "Set flag. When set, the S-Flag indicates that + the Adj-SID refers to a set of adjacencies."; + } + } + description + "Flags associated with Adj-Segment-ID."; + } + + leaf weight { + type uint8; + description + "Value that represents the weight of the Adj-SID for + the purpose of load balancing."; + } + } + } + + reference + "draft-ietf-isis-segment-routing-extensions. sub-TLV 31: + TLV 22, 222, 223, 141. "; + } + + container lan-adjacency-sids { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_ADJ_LAN_SID'" { + description + "Only include the LAN adjacency SID container when + the sub-TLV is type 32."; + } + description + "This container defines segment routing LAN adjacency + SIDs"; + + list lan-adjacency-sid { + key "value"; + + description + "Adjacency Segment-IDs List. An IGP-Adjacency Segment is + an IGP segment attached to a unidirectional adjacency or + a set of unidirectional adjacencies. By default, an IGP- + Adjacency Segment is local to the node which advertises + it."; + + leaf value { + type leafref { + path "../state/value"; + } + description + "Reference to the value of the LAN Adjacency-SID."; + } + + container state { + description + "State parameters of LAN Adjacency-SID."; + + leaf value { + type uint32; + description + "LAN Adjacency-SID value."; + } + + leaf-list flags { + type enumeration { + enum ADDRESS_FAMILY { + description + "Address-family flag. When unset, the Adj-SID + refers to an adjacency with outgoing IPv4 + encapsulation. If set then the Adj-SID refers to + an adjacency with outgoing IPv6 encapsulation."; + } + enum BACKUP { + description + "Backup flag. When set, the Adj-SID refers to an + adjacency being protected (e.g.: using IPFRR or + MPLS-FRR)."; + } + enum VALUE { + description + "Value flag. When set, the SID carries a value + (instead of an index). By default the flag is + SET."; + } + enum LOCAL { + description + "Local flag. When set, the value/index carried + by the SID has local significance. By default + the flag is SET."; + } + enum SET { + description + "Set flag. When set, the S-Flag indicates that + the Adj-SID refers to a set of adjacencies."; + } + } + description + "Flags associated with LAN-Adj-Segment-ID."; + } + + leaf weight { + type uint8; + description + "Value that represents the weight of the Adj-SID + for the purpose of load balancing."; + } + + leaf neighbor-id { + type oc-isis-types:system-id; + description + "System ID of the neighbor associated with the LAN- + Adj-Segment-ID value."; + } + } + } + + reference + "draft-ietf-isis-segment-routing-extensions. sub-TLV 32: + TLV 22, 222, 223, 141."; + } + + container link-delay { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_LINK_DELAY'" { + description + "Include the link delay container only when the sub-TLV + type is type 33."; + } + description + "This container defines unidirectional link delay."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 33: TLV 22, 23, 141, 222, 223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 33."; + + uses isis-lsdb-link-characteristics-a-bit; + + leaf delay { + type uint32; + units microseconds; + description + "Average link delay value (in microseconds) between + two directly connected IS-IS neighbors over a + configurable interval."; + } + } + } + + container min-max-link-delay { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_MIN_MAX_LINK_DELAY'" { + description + "Only include the min/max link delay container when the + sub-TLV is type 34."; + } + description + "This container defines min/max link delay."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 34: TLV 22, 23, 141, 222, 223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 34."; + + uses isis-lsdb-link-characteristics-a-bit; + + leaf min-delay { + type uint32; + units microseconds; + description + "Minimum measured link delay value(in microseconds) + between two directly connected IS-IS neighbors over a + configurable interval."; + } + + leaf max-delay { + type uint32; + units microseconds; + description + "Maximum measured link delay value(in microseconds) + between two directly connected IS-IS neighbors over a + configurable interval."; + } + } + } + + container link-delay-variation { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_LINK_DELAY_VARIATION'" { + description + "Only include the link delay variation container when + the sub-TLV is type 35."; + } + description + "This container defines unidirectional link delay + variation."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 35: TLV 22,23,141,222,223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 35."; + + leaf delay { + type uint32; + units microseconds; + description + "Average link delay between two directly connected IS- + IS neighbors over a configurable interval."; + } + } + } + + container link-loss { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_LINK_LOSS'" { + description + "Only include the link loss container when the sub-TLV + is type 36."; + } + description + "This container defines unidirectional link loss delay."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 36: TLV 22, 23, 141, 222, 223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 36."; + + uses isis-lsdb-link-characteristics-a-bit; + + leaf link-loss { + type uint32; + description + "Link packet loss as a percentage of the total traffic + sent over a configurable interval. The basic unit is + 0.000003%, where (2^24 - 2) is 50.331642%. This value + is the highest packet-loss percentage that can be + expressed (the assumption being that precision is more + important on high-speed links than the ability to + advertise loss rates greater than this, and that high- + speed links with over 50% loss are unusable). + Therefore, measured values that are larger than the + field maximum SHOULD be encoded as the maximum + value."; + } + } + } + + container residual-bandwidth { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_RESIDUAL_BANDWIDTH'" { + description + "Only include the resdiual bandwidth container when the + sub-TLV is type 37."; + } + description + "This container defines unidirectional residual + bandwidth."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 37: TLV 22, 23, 141, 222, 223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 37."; + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "Residual bandwidth on a link,forwarding adjacency + [RFC4206], or bundled link in IEEE floating-point + format with units of bytes per second. For a link or + forwarding adjacency, residual bandwidth is defined to + be the Maximum Bandwidth [RFC5305] minus the bandwidth + currently allocated to RSVP-TE label switched paths. + For a bundled link, residual bandwidth is defined to + be the sum of the component link residual + bandwidths."; + } + } + } + + container available-bandwidth { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_AVAILABLE_BANDWIDTH'" { + description + "Only include the available bandwdith container when the + sub-TLV is type 38."; + } + description + "This container defines unidirectional lavailable + bandwidth."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 38: TLV 22, 23, 141, 222, 223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 38."; + + uses isis-lsdb-subtlv-type-state; + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The available bandwidth on a link, forwarding + adjacency, or bundled link in IEEE floating-point + format with units of bytes per second. For a link or + forwarding adjacency, available bandwidth is defined + to be residual bandwidth minus the measured bandwidth + used for the actual forwarding of non-RSVP-TE label + switched path packets. For a bundled link, available + bandwidth is defined to be the sum of the component + link available bandwidths minus the measured bandwidth + used for the actual forwarding of non-RSVP-TE label + switched path packets. For a bundled link, available + bandwidth is defined to be the sum of the component + link available bandwidths."; + } + } + } + + container utilized-bandwidth { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_REACHABILITY_UTILIZED_BANDWIDTH'" { + description + "Only include the utilized bandwidth container when the + TLV is type 39."; + } + description + "This container defines unidirectional utilized + bandwidth."; + + reference + "RFC7810: IS-IS Traffic Engineering (TE) Metric + Extensions. sub-TLV 39: TLV 22, 23, 141, 222, 223."; + + container state { + description + "State parameters of IS Extended Reachability sub-TLV + 39."; + + uses isis-lsdb-subtlv-type-state; + + leaf bandwidth { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The bandwidth utilization on a link, forwarding + adjacency, or bundled link in IEEE floating-point + format with units of bytes per second. For a link or + forwarding adjacency, bandwidth utilization represents + the actual utilization of the link (i.e., as measured + by the advertising node). For a bundled link, + bandwidth utilization is defined to be the sum of the + component link bandwidth utilizations."; + } + } + } + } + } + + uses isis-lsdb-undefined-subtlv; + } + + grouping isis-lsdb-undefined-tlv { + description + "Grouping for unknown TLVs in the IS-IS LSDB"; + + container undefined-tlvs { + description + "Surrounding container for a list of unknown TLVs."; + + list undefined-tlv { + key "type"; + description + "List of TLVs that are not defined within the model, or are + not recognised by the system."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the undefined TLV's type"; + } + + container state { + description + "State parameters of the undefined TLV."; + + uses undefined-tlv-state; + } + } + } + } + + grouping isis-lsdb-undefined-subtlv { + description + "Grouping for unknown Sub-TLVs in the IS-IS LSDB."; + + container undefined-subtlvs { + description + "This container describes undefined ISIS TLVs."; + + list undefined-subtlv { + key "type"; + + description + "Sub-TLVs that are not defined in the model or not + recognised by system."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the type of the undefined sub-TLV"; + } + + container state { + description + "State parameters of the undefined sub-TLV."; + + uses undefined-subtlv-state; + } + } + } + } + + grouping isis-lsdb-prefix-state { + description + "This grouping defines prefix reachability."; + + container subtlvs { + description + "This container describes IS prefix sub-TLVs."; + + list subtlv { + key "type"; + + description + "List of subTLV types in the LSDB for the specified TLV."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the sub-TLV type"; + } + + container state { + description + "State parameters for a prefix."; + + uses isis-lsdb-subtlv-type-state; + } + + container tag { + when "../state/type = " + + "'oc-isis-lsdb-types:IP_REACHABILITY_TAG'" { + description + "Only include the tag container when the sub-TLV is type + 1."; + } + description + "This container defines sub-TLV 1."; + + container state { + description + "State parameters of sub-TLV 1."; + + leaf-list tag32 { + type uint32; + description + "List of 32-bit tags associated with the prefix. Example + uses of these tags include carrying BGP standard (or + extended) communities and controlling redistribution + between levels and areas, different routing protocols, + or multiple instances of IS-IS running on the same + router."; + reference + "RFC5130: A Policy Control Mechanism in IS-IS Using + Administrative Tags. sub-TLV 1."; + } + } + } + + container tag64 { + when "../state/type = " + + "'oc-isis-lsdb-types:IP_REACHABILITY_TAG64'" { + description + "Only include the tag64 container when the sub-TLV is type + 2."; + } + description + "This container defines sub-TLV 2."; + + container state { + description + "State parameters of sub-TLV 2."; + + leaf-list tag64 { + type uint64; + description + "List of 64-bit tags associated with the prefix. Example + uses of these tags include carrying BGP standard (or + extended) communities and controlling redistribution + between levels and areas, different routing protocols, + or multiple instances of IS-IS running on the same + router."; + reference + "RFC5130: A Policy Control Mechanism in IS-IS Using + Administrative Tags. sub-TLV 2."; + } + } + } + + container flags { + when "../state/type = " + + "'oc-isis-lsdb-types:IP_REACHABILITY_PREFIX_FLAGS'" { + description + "Only include the flags container when the sub-TLV is type + 4."; + } + description + "This container defines sub-TLV 4."; + + container state { + description + "State parameters of sub-TLV 4."; + + uses isis-lsdb-subtlv-type-state; + + leaf-list flags { + type enumeration { + enum EXTERNAL_FLAG { + description + "External prefix flag. Set if the prefix has been + redistributed from another protocol. This includes + the case where multiple virtual routers are + supported and the source of the redistributed prefix + is another IS-IS instance."; + } + enum READVERTISEMENT_FLAG { + description + "Readvertisement flag. Set when the prefix has been + leaked from one level to another (upwards or + downwards)."; + } + enum NODE_FLAG { + description + "Node flag. Set when the prefix identifies the + advertising router, i.e., the prefix is a host + prefix advertising a globally reachable address + typically associated with a loopback address."; + } + } + description + "Additional prefix reachability flags."; + + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 and + IPv6 Reachability. sub-TLV 4."; + } + } + } + + container ipv4-source-router-id { + when "../state/type = " + + "'oc-isis-lsdb-types:IP_REACHABILITY_IPV4_ROUTER_ID'" { + description + "Only include the IPv4 Source Router ID container when + the sub-TLV is type 11."; + } + description + "This container defines sub-TLV 11."; + + container state { + description + "State parameters of sub-TLV 11."; + + uses isis-lsdb-subtlv-type-state; + + leaf router-id { + type inet:ipv4-address; + description + "IPv4 Source router ID address. In cases where the + advertisement is an identifier for the advertising + router (e.g., with the N-flag set in the Prefix + Attribute Flags sub-TLV), it may be useful for other + routers to know the source of the advertisement. When + reachability advertisement is leaked from one level to + another, Router ID advertised is always the Router ID + of the IS-IS instance that originated the + advertisement. This would be true even if the prefix + had been learned from another protocol."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 + and IPv6 Reachability. sub-TLV 11"; + } + } + } + + container ipv6-source-router-id { + when "../state/type = " + + "'oc-isis-lsdb-types:IP_REACHABILITY_IPV6_ROUTER_ID'" { + description + "Only include the IPv6 Source Router ID container when + the sub-TLV is type 12."; + } + description + "This container defines sub-TLV 12."; + + container state { + description + "State parameters of sub-TLV 12."; + + uses isis-lsdb-subtlv-type-state; + + leaf router-id { + type inet:ipv6-address; + description + "IPv6 Source router ID address. In cases where the + advertisement is an identifier for the advertising + router (e.g., with the N-flag set in the Prefix + Attribute Flags sub-TLV), it may be useful for other + routers to know the source of the advertisement. When + reachability advertisement is leaked from one level to + another, Router ID advertised is always the Router ID + of the IS-IS instance that originated the + advertisement. This would be true even if the prefix + had been learned from another protocol."; + reference + "RFC7794: IS-IS Prefix Attributes for Extended IPv4 + and IPv6 Reachability. sub-TLV 12."; + } + } + } + + uses isis-lsdb-prefix-sid-state; + } + } + + uses isis-lsdb-undefined-subtlv; + } + + grouping isis-lsdb-prefix-sid-state { + description + "This grouping defines ISIS Prefix SID."; + + container prefix-sids { + when "../state/type = " + + "'oc-isis-lsdb-types:IP_REACHABILITY_PREFIX_SID'" { + description + "Only include the Prefix SID container when + the sub-TLV is type 3."; + } + description + "This container defines segment routing extensions for + prefixes."; + + reference + "draft-ietf-isis-segment-routing-extensions. sub-TLV 3: TLV + 135, 235, 236, 237."; + + list prefix-sid { + key "value"; + + description + "Prefix Segment-ID list. IGP-Prefix Segment is an IGP segment + attached to an IGP prefix. An IGP-Prefix Segment is global + (unless explicitly advertised otherwise) within the SR/IGP + domain."; + + leaf value { + type leafref { + path "../state/value"; + } + description + "Reference to the value of the prefix SID."; + } + + container state { + description + "State parameters for Prefix-SID."; + + leaf value { + type uint32; + description + "IGP Prefix-SID value."; + } + + leaf-list flags { + type enumeration { + enum READVERTISEMENT { + description + "Readvertisment flag. When set, the prefix to which + this Prefix-SID is attached, has been propagated by + the router either from another level or from + redistribution."; + } + enum NODE { + description + "Node flag. When set, the Prefix-SID refers to the + router identified by the prefix. Typically, the + N-Flag is set on Prefix-SIDs attached to a router + loopback address."; + } + enum NO_PHP { + description + "Penultimate-Hop-Popping flag. When set, then the + penultimate hop MUST NOT pop the Prefix-SID before + delivering the packet to the node that advertised + the Prefix-SID."; + } + enum EXPLICIT_NULL { + description + "Explicit-Null flag. When set, any upstream neighbor + of the Prefix-SID originator MUST replace the + Prefix-SID with a Prefix-SID having an Explicit-NULL + value (0 for IPv4 and 2 for IPv6) before forwarding + the packet."; + } + enum VALUE { + description + "Value flag. When set, the Prefix-SID carries a + value (instead of an index). By default the flag is + UNSET."; + } + enum LOCAL { + description + "Local flag. When set, the value/index carried by + the Prefix-SID has local significance. By default + the flag is UNSET."; + } + } + description + "Flags associated with Prefix Segment-ID."; + } + + leaf algorithm { + type uint8; + description + "Prefix-SID algorithm to be used for path computation."; + } + } + } + } + } + + grouping isis-lsdb-common-metric-specification { + description + "Common definitions of the metric in IS-IS."; + + container default-metric { + description + "This container defines ISIS Default Metric."; + + container state { + description + "State parameters for default-metric."; + + leaf flags { + type enumeration { + enum INTERNAL { + description + "When set to zero, indicates internal metrics."; + } + } + description + "ISIS Default-Metric Flags."; + } + + leaf metric { + type oc-isis-types:narrow-metric; + description + "ISIS default metric value. This is a metric understood by + every Intermediate system in the domain. Each circuit + shall have a positive integral value assigned for this + metric. The value may be associated with any objective + function of the circuit, but by convention is intended to + measure the capacity of the circuit for handling traffic, + for example, its throughput in bits-per-second. Higher + values indicate a lower capacity."; + } + } + } + + container delay-metric { + description + "This container defines the ISIS delay metric."; + + container state { + description + "State parameters of delay-metric."; + + leaf metric { + type oc-isis-types:narrow-metric; + description + "ISIS delay metric value. This metric measures the transit + delay of the associated circuit. It is an optional metric, + which if assigned to a circuit shall have a positive + integral value. Higher values indicate a longer transit + delay."; + } + + leaf-list flags { + type isis-metric-flags; + description + "ISIS Delay Metric Flags."; + } + } + } + + container expense-metric { + description + "This container defines the ISIS expense metric."; + + container state { + description + "State parameters of expense-metric."; + + leaf metric { + type oc-isis-types:narrow-metric; + description + "ISIS expense metric value. This metric measures the + monetary cost of utilising the associated circuit. It is + an optional metric, which if assigned to a circuit shall + have a positive integral value1). Higher values indicate a + larger monetary expense."; + } + + leaf-list flags { + type isis-metric-flags; + description + "ISIS Expense Metric Flags."; + } + } + } + + container error-metric { + description + "This container defines the ISIS error metric."; + + container state { + description + "State parameters of error-metric."; + + leaf metric { + type oc-isis-types:narrow-metric; + description + "ISIS error metric value. This metric measures the + residual error probability of the associated circuit. It + is an optional metric, which if assigned to a circuit + shall have a non-zero value. Higher values indicate a + larger probability of undetected errors on the circuit."; + } + + leaf-list flags { + type isis-metric-flags; + description + "IS-IS error metric flags."; + } + } + } + } + + grouping isis-lsdb-neighbor { + description + "This grouping defines attributes of an ISIS standard + neighbor."; + + container state { + description + "State parameters of IS standard neighbor."; + + leaf system-id { + type oc-isis-types:system-id; + description + "System-ID of IS neighbor."; + } + } + + uses isis-lsdb-common-metric-specification; + + } + + grouping ipv4-prefix-attributes-state { + description + "This group defines attributes of an IPv4 standard prefix."; + + container state { + description + "State parameters of IPv4 standard prefix."; + + leaf up-down { + type boolean; + description + "The up/down bit. Set if a prefix is advertised from a + higher level to a lower level (e.g., level 2 to level 1), + indicating that the prefix has traveled down the hierarchy. + Prefixes that have the up/down bit set may only be + advertised down the hierarchy, i.e., to lower levels. When a + prefix is first injected into IS-IS, the bit is UNSET."; + } + + leaf prefix { + type inet:ipv4-prefix; + description + "IPv4 prefix contained within reachability TLVs."; + } + } + + uses isis-lsdb-common-metric-specification; + } + + grouping isis-lsdb-common-mt-id { + description + "Common definition of the multi-topology ID"; + + leaf mt-id { + type uint16 { + range "0..4095"; + } + description + "Multi-topology ID"; + } + } + + grouping ipv4-prefix-extended-state { + description + "This grouping defines attributes of an IPv4 extended prefix."; + + container state { + description + "State parameters of an IPv4 extended prefix."; + uses ipv4-prefix-extended-params-state; + } + + uses isis-lsdb-prefix-state; + } + + grouping ipv4-mt-prefix-extended-state { + description + "State parameters that relate to an IPv4 prefix in a + multi-topology context."; + + container state { + description + "State parameters of an IPv4 extended prefix."; + uses ipv4-prefix-extended-params-state; + uses isis-lsdb-common-mt-id; + } + + uses isis-lsdb-prefix-state; + } + + grouping ipv4-prefix-extended-params-state { + description + "State parameters that relate to an IPv4 prefix"; + + leaf up-down { + type boolean; + description + "The up/down bit. Set if a prefix is advertised from a + higher level to a lower level (e.g., level 2 to level 1), + indicating that the prefix has traveled down the hierarchy. + Prefixes that have the up/down bit set may only be + advertised down the hierarchy, i.e., to lower levels. When a + prefix is first injected into IS-IS, the bit is UNSET."; + } + + leaf s-bit { + type boolean; + description + "The Sub-TLV present bit. If UNSET, the octets of Sub-TLVs + are not present. Otherwise, the bit is set and the octet + following the prefix will contain the length of the Sub-TLV + portion of the structure."; + } + + leaf prefix { + type inet:ipv4-prefix; + description + "IPv4 prefix contained within extended reachability TLVs."; + } + + leaf metric { + type oc-isis-types:wide-metric; + description + "ISIS metric value."; + } + } + + grouping ipv6-prefix-extended-state { + description + "State parameters relating to an IPv6 prefix."; + + container state { + description + "State parameters of IPv6 prefix attributes"; + + uses ipv6-prefix-extended-params-state; + } + + uses isis-lsdb-prefix-state; + } + + grouping ipv6-mt-prefix-extended-state { + description + "State parameters relating to a multi-topology IPv6 + prefix."; + + container state { + description + "State parameters relating an IPv6 prefix attribute"; + uses ipv6-prefix-extended-params-state; + uses isis-lsdb-common-mt-id; + } + + uses isis-lsdb-prefix-state; + } + + grouping ipv6-prefix-extended-params-state { + description + "Common parameters of an IPv6 extended prefix."; + + leaf up-down { + type boolean; + description + "The up/down bit. Set if a prefix is advertised from a + higher level to a lower level (e.g., level 2 to level 1), + indicating that the prefix has traveled down the hierarchy. + Prefixes that have the up/down bit set may only be + advertised down the hierarchy, i.e., to lower levels. When a + prefix is first injected into IS-IS, the bit is UNSET."; + } + + leaf x-bit { + type boolean; + description + "The external bit. Set when the prefix was distributed into + IS-IS from another routing protocol."; + } + + leaf s-bit { + type boolean; + description + "The sub-tlv present bit. If UNSET, the octets of Sub-TLVs + are not present. Otherwise, the bit is set and the octet + following the prefix will contain the length of the Sub-TLV + portion of the structure."; + } + + leaf prefix { + type inet:ipv6-prefix; + description + "IPv6 prefix contained within extended reachability TLVs."; + } + + leaf metric { + type oc-isis-types:wide-metric; + description + "ISIS metric value."; + } + } + + grouping isis-lsdb-common-extisreach-neighbors { + description + "Common structure for the Extended IS Reachability and IS + Reachability Neighbour attributes."; + + container neighbors { + description + "This container describes IS neighbors."; + + list neighbor { + key "system-id"; + description + "This list describes ISIS extended neighbors and + reachability attributes."; + + leaf system-id { + type leafref { + path "../state/system-id"; + } + description + "Reference to the neighboring system's system ID."; + } + + container state { + description + "State parameters corresponding to the extended + neighbour."; + + leaf system-id { + type oc-isis-types:system-id; + description + "System-id of the neighbor."; + } + } + + container instances { + description + "This list contains all instances of an adjacency + between the originating IS and the remote IS. + Multiple instances are used where there are + parallel adjacencies between two systems."; + + list instance { + key "id"; + + description + "Instance of the TLV to the remote IS neighbor."; + + leaf id { + type leafref { + path "../state/id"; + } + description + "Reference to the unique identifier for + the instance of the extended IS + reachability sub-TLV."; + } + + container state { + description + "State parameters of extended neighbor"; + + leaf id { + type uint64; + description + "Unique identifier for the instance of the + TLV for the IS neighbor. The instance + ID is not required to be consistent across + across readvertisements of the LSP."; + } + + leaf metric { + type oc-isis-types:wide-metric; + description + "Metric value."; + } + } + uses is-reachability-neighbor-state; + } + } + } + } + } + + grouping isis-lsdb-mtis-common { + description + "Common grouping for structure used within the multi-topology IS + neighbour and multi-topology IS neighbour attribute TLVs."; + + container neighbors { + description + "MT-IS neigbor attributes."; + + list neighbor { + key "mt-id system-id"; + description + "This container describes IS neighbors."; + + leaf mt-id { + type leafref { + path "../state/mt-id"; + } + description + "Reference to the topology that the neighbor is + within."; + } + + leaf system-id { + type leafref { + path "../state/system-id"; + } + description + "Reference to the System ID of the neighbor."; + } + + container state { + description + "Operational state parameters related to the + MT ISN TLV."; + + uses mt-isis-neighbor-state; + } + + container instances { + description + "This list contains all instances of an adjacency + between the originating and remote IS. Multiple + instances are used to indicate where there are + parallel adjacencies between systems."; + + list instance { + key "id"; + + description + "Instance of TLV-222 between the originating + and remote IS."; + + leaf id { + type leafref { + path "../state/id"; + } + description + "Reference to the unique identifier for the + instance of the multi-topology IS neighbor + TLV instance."; + } + + uses mt-isis-neighbor-instance; + } + } + } + } + } + + grouping mt-isis-neighbor-state { + description + "This grouping defines state parameters that are related to + each neighbour entry for the MT ISN TLV."; + + leaf mt-id { + type uint16 { + range "0..4095"; + } + description + "Identifier of a topology being announced."; + } + + leaf system-id { + type oc-isis-types:system-id; + description + "System-id of the IS neighbor."; + } + } + + grouping mt-isis-neighbor-instance { + description + "This grouping defines list of ISIS multi-topology neighbors for + extended ISIS LSP (multiple system IDs)."; + + container state { + description + "State parameters of MT neighbor."; + + leaf metric { + type oc-isis-types:wide-metric; + description + "ISIS metric value."; + } + + leaf id { + type uint64; + description + "Unique identifier for the TLV instance for the + neighbor. The ID is not required to be consistent + across readvertisements of the LSP."; + } + } + uses is-reachability-neighbor-state; + } + + grouping isis-lsdb-generic-tlv { + description + "Generic TLV encoding grouping."; + + leaf type { + type uint8; + description + "TLV Type."; + } + + leaf length { + type uint8; + description + "TLV length."; + } + + leaf value { + type binary; + description + "TLV value."; + } + } + + grouping undefined-tlv-state { + description + "Generic grouping defining an unknown TLV."; + + uses isis-lsdb-generic-tlv; + } + + grouping undefined-subtlv-state { + description + "Generic grouping defining an unknown sub-TLV."; + + uses isis-lsdb-generic-tlv; + } + + grouping lsp-state { + description + "This grouping defines ISIS LSP state information."; + + leaf lsp-id { + type leafref { + path "../state/lsp-id"; + } + + description + "A reference to the Link State PDU ID."; + } + + container state { + description + "State parameters of Link State PDU."; + + leaf lsp-id { + type oc-isis-types:lsp-id; + description + "LSP ID of the LSP."; + } + + leaf maximum-area-addresses { + type uint8; + description + "Number of area addresses permitted for this ISs area. 0 + indicates the IS only supports three area addresses (by + default). Any number inclusive of 1 and 254 indicates the + number of areas allowed."; + } + + leaf version { + type uint8; + default 1; + description + "PDU version. This is set to 1."; + } + + leaf version2 { + type uint8; + default 1; + description + "PDU version2. This is set to 1"; + } + + leaf id-length { + type uint8; + description + "Length of the ID field of NSAP addresses and NETs used in + this routing domain."; + } + + leaf pdu-type { + type enumeration { + enum LEVEL_1 { + description "This enum describes ISIS level 1 PDU."; + } + enum LEVEL_2 { + description "This enum describes ISIS level 2 PDU."; + } + } + description + "Link State PDU type."; + } + + leaf remaining-lifetime { + type uint16; + units "seconds"; + description + "Remaining lifetime in seconds before the LSP expiration."; + } + + leaf sequence-number { + type uint32; + description + "Sequence number of the LSP."; + } + + leaf checksum { + type uint16; + description + "Checksum of the LSP."; + } + + leaf pdu-length { + type uint16; + description + "Total length of the LSP."; + } + + leaf-list flags { + type enumeration { + enum PARTITION_REPAIR { + description + "When set, the originator supports partition + repair."; + } + enum ATTACHED_ERROR { + description + "When set, the originator is attached to another + area using the referred metric."; + } + enum ATTACHED_EXPENSE { + description + "When set, the originator is attached to another + area using the referred metric."; + } + enum ATTACHED_DELAY { + description + "When set, the originator is attached to another + area using the referred metric."; + } + enum ATTACHED_DEFAULT { + description + "When set, the originator is attached to another + area using the referred metric."; + } + enum OVERLOAD { + description + "When set, the originator is overloaded, and must + be avoided in path calculation."; + } + } + description + "LSP Type-Block flags."; + } + + leaf is-type { + type oc-isis-types:level-number; + description + "Type of neighboring system."; + } + } + + container tlvs { + description + "This container defines Link State PDU State TLVs."; + + list tlv { + key "type"; + + description + "List of TLV types in the LSDB for the specified LSP."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the TLV's type."; + } + + container state { + config false; + description + "Operational state parameters relating to the specified + LSP"; + + uses isis-lsdb-tlv-type-state; + } + + container area-address { + when "../state/type = 'oc-isis-lsdb-types:AREA_ADDRESSES'" { + description + "Include area address parameters only when the TLV type + is TLV 1."; + } + + description + "This container defines TLV 1."; + + container state { + description + "State parameters of ISIS TLV 1."; + + leaf-list address { + type oc-isis-types:area-address; + description + "Area adress(es) of the IS. Set of manual area + addresses of this IS."; + reference + "ISO 10589 Intermediate System to Intermediate System + Intra- Domain Routeing Exchange Protocol for use in + Conjunction with the Protocol for Providing the + Connectionless-mode Network Service (ISO 8473 ) + International Standard 10589: 2002, Second Edition, + 2002. TLV 1."; + } + } + } + + container lsp-buffer-size { + when "../state/type = " + + "'oc-isis-lsdb-types:LSP_BUFFER_SIZE'" { + description + "Include the LSP buffer size parameters only when the + TLV type is TLV 14."; + } + + description + "This container defines TLV 14 - the LSP Buffer Size + TLV."; + + container state { + description + "State parameters of TLV 14."; + + leaf size { + type uint16; + units "bytes"; + description + "The maximum MTU that the advertising system can + receive, expressed in bytes."; + reference + "ISO 10589 Intermediate System to Intermediate System + Intra- Domain Routeing Exchange Protocol for use in + Conjunction with the Protocol for Providing the + Connectionless-mode Network Service (ISO 8473 ) + International Standard 10589: 2002, Second Edition, + 2002. TLV 14."; + } + } + } + + container nlpid { + when "../state/type = 'oc-isis-lsdb-types:NLPID'" { + description + "Include NLPID specification only when the TLV type is + TLV 129."; + } + + description + "This container defines TLV 129."; + + container state { + description + "State parameters of ISIS TLV 129."; + + uses isis-lsdb-tlv-nlpid-state; + } + } + + container hostname { + when "../state/type = 'oc-isis-lsdb-types:DYNAMIC_NAME'" { + description + "Include the dynamic hostname TLV only when the TLV is + type 137."; + } + description + "This container defines TLV 137."; + + container state { + description + "State parameters of ISIS TLV 137."; + + leaf-list hostname { + type string; + description + "Name of the node."; + + reference + "RFC6233: IS-IS Registry Extension for Purges, RFC + 5301: Dynamic Hostname Exchange Mechanism for IS-IS. + TLV 137"; + } + } + } + + container ipv4-interface-addresses { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV4_INTERFACE_ADDRESSES'" { + description + "Include the IPv4 interface addresses TLV only when the + TLV is type 132."; + } + description + "This container defines TLV 132."; + + container state { + description + "State parameters of ISIS TLV 132."; + + leaf-list address { + type inet:ipv4-address; + description + "IPv4 address(es) of the interface corresponding to + the SNPA over which this PDU is to be transmitted."; + reference + "RFC1195: Use of OSI IS-IS for Routing in TCP/IP and + Dual Environments. TLV 132."; + } + } + } + + container ipv6-interface-addresses { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV6_INTERFACE_ADDRESSES'" { + description + "Include the IPv6 interface addresses TLV only when the + TLV is type 232."; + } + description + "This container defines TLV 232."; + + container state { + description + "State parameters of ISIS TLV 232."; + + leaf-list address { + type inet:ipv6-address; + description + "IPv6 interface addresses of the node. MUST contain + only the non-link-local IPv6 addresses assigned to the + IS."; + reference + "RFC5308: Routing IPv6 with IS-IS. TLV 232."; + } + } + } + + container ipv4-te-router-id { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV4_TE_ROUTER_ID'" { + description + "Include the IPv4 traffic engineering router ID TLV only + when the TLV is type 134."; + } + description + "This container defines TLV 134."; + + container state { + description + "State parameters of ISIS TLV 134."; + + leaf-list router-id { + type inet:ipv4-address; + description + "IPv4 Traffic Engineering router ID of the node. For + traffic engineering, it guarantees that we have a + single stable address that can always be referenced in + a path that will be reachable from multiple hops away, + regardless of the state of the node's interfaces."; + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. TLV + 134."; + } + } + } + + container ipv6-te-router-id { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV6_TE_ROUTER_ID'" { + description + "Include the IPv6 traffic engineering router ID TLV only + when the TLV is type 140."; + } + description + "This container defines TLV 140."; + + container state { + description + "State parameters of ISIS TLV 140."; + + leaf-list router-id { + type inet:ipv6-address; + description + "IPv6 Traffic Engineering router ID of the node. For + traffic engineering, it guarantees that we have a + single stable address that can always be referenced in + a path that will be reachable from multiple hops away, + regardless of the state of the node's interfaces."; + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS. TLV + 140."; + } + } + } + + container instance-ids { + when "../state/type = 'oc-isis-lsdb-types:INSTANCE_ID'" { + description + "Include the ISIS Instance Identifier TLV only when the + TLV is type 7."; + } + description + "This container defines ISIS Instance Identifier TLV."; + reference "RFC6822: IS-IS Multi-Instance. TLV 7."; + + list instance-id { + key "instance-id"; + + description + "A list of instance IDs received within TLV 7 within an + IS-IS LSP. In the case that more than one instance of + TLV 7 is included in the LSP, the instance IDs specified + within the instances are concatenated within this + list."; + + leaf instance-id { + type leafref { + path "../state/instance-id"; + } + description + "Reference to the unique instance ID."; + } + container state { + description + "State parameters of ISIS TLV 7."; + + leaf instance-id { + type uint16; + description + "An Instance Identifier (IID) to uniquely identify + an IS-IS instance. When the IID = 0, the list of + supported ITIDs MUST NOT be present. An IID-TLV with + IID = 0 MUST NOT appear in an SNP or LSP. When the + TLV appears (with a non-zero IID) in an SNP or LSP, + exactly one ITID. MUST be present indicating the + topology with which the PDU is associated. If no + ITIDs or multiple ITIDs are present or the IID is + zero, then the PDU MUST be ignored."; + } + + leaf-list topology-id { + type uint16; + description + "Instance-Specific Topology Identifiers (ITIDs)."; + } + } + } + } + + container ipv4-srlgs { + when "../state/type = 'oc-isis-lsdb-types:IPV4_SRLG'" { + description + "Include the IPv4 SRLG TLV only when the TLV is type + 138."; + } + description + "This container defines ISIS SRLG TLV 138."; + + reference + "RFC5307: IS-IS Extensions in Support of Generalized + Multi-Protocol Label Switching (GMPLS). TLV 138."; + + list ipv4-srlg { + key "instance-number"; + + description + "Instance of the IPv4 SRLG TLV"; + + leaf instance-number { + type leafref { + path "../state/instance-number"; + } + description + "Reference to the instance number of TLV 138."; + } + + container state { + description + "State parameters of TLV 138."; + + leaf instance-number { + type uint32; + description + "An arbitrary unsigned 32-bit integer used to + disambiguate the instance of TLV 138. The instance + identifier is synthesised by the system + and may be renumbered for the same SRLG definition + in subsequent advertised LSPs if (and only if) the + entire list of SRLGs is replaced."; + } + + leaf system-id { + type oc-isis-types:system-id; + description + "Neighbor system ID."; + } + + leaf psn-number { + type uint8; + description + "Pseudonode number if the neighbor is on a LAN + interface."; + } + + leaf-list flags { + type enumeration { + enum NUMBERED { + description + "When set, the interface is numbered, whereas if + unset indicates that the interface is + unnumbered."; + } + } + description + "SRLG flags."; + } + + leaf ipv4-interface-address { + type inet:ipv4-address; + description + "IPv4 interface address."; + } + + leaf ipv4-neighbor-address { + type inet:ipv4-address; + description + "IPv4 neighbor address."; + } + + leaf-list srlg-value { + type uint32; + description + "List of SRLG values."; + } + } + } + } + + container ipv6-srlgs { + when "../state/type = 'oc-isis-lsdb-types:IPV6_SRLG'" { + description + "Include the IPv6 SRLG TLV only when the TLV is type + 139."; + } + description + "This container defines ISIS SRLG TLV."; + + reference + "RFC6119: IPv6 Traffic Engineering in IS-IS. TLV 139."; + + list ipv6-srlg { + key "instance-number"; + + description + "Instance of the IPv6 SRLG TLV."; + + leaf instance-number { + type leafref { + path "../state/instance-number"; + } + description + "Reference to the instance number of the IPv6 Shared + Risk Link Group (SRLG) TLV."; + } + + container state { + description + "State parameters of TLV 139."; + + leaf instance-number { + type uint32; + description + "An arbitrary unsigned 32-bit integer used to + disambiguate the instance of TLV 138. The instance + identifier is synthesised by the system + and may be renumbered for the same SRLG definition + in subsequent advertised LSPs if (and only if) the + entire list of SRLGs is replaced."; + } + + leaf system-id { + type oc-isis-types:system-id; + description + "Neighbor system ID."; + } + + leaf psn-number { + type uint8; + description + "Pseudonode number if the neighbor is on a LAN + interface."; + } + + leaf-list flags { + type enumeration { + enum NA { + description + "When set, the IPv6 neighbour address is + included, whereas if unset, it is omitted"; + } + } + description + "IPv6 SRLG flags."; + } + + leaf ipv6-interface-address { + type inet:ipv6-address; + description + "IPv6 interface address or Link Local Identifier."; + } + + leaf ipv6-neighbor-address { + type inet:ipv6-address; + description + "IPv6 neighbor address or Link Remote Identifier."; + } + + leaf-list srlg-value { + type uint32; + description + "SRLG values."; + } + } + } + } + + container purge-oi { + when "../state/type = 'oc-isis-lsdb-types:PURGE_OI'" { + description + "Only include the purge originator identitication TLV + when the TLV type is 13."; + } + description + "This container defines ISIS purge TLV."; + + reference + "RFC6232: Purge Originator Identification TLV for IS-IS. + TLV 13."; + + container state { + description + "State parameters of TLV 13."; + + leaf system-id-count { + type uint8; + description + "Number of system IDs carried in this TLV."; + } + + leaf source-system-id { + type oc-isis-types:system-id; + description + "System ID of the Intermediate System that inserted + this TLV."; + } + + leaf received-system-id { + type oc-isis-types:system-id; + description + "System ID of the Intermediate System from which the + purge was received."; + } + } + } + + container router-capabilities { + when "../state/type = " + + "'oc-isis-lsdb-types:ROUTER_CAPABILITY'" { + description + "Only include the router capability TLV when the TLV is + type 242."; + } + description + "This container defines router capabilities."; + + list capability { + key "instance-number"; + + description + "This list describes IS Router capabilities."; + + reference + "RFC4971: Intermediate System to Intermediate System + (IS-IS) Extensions for Advertising Router Information. + TLV 242."; + + leaf instance-number { + type leafref { + path "../state/instance-number"; + } + description + "Reference to the instance number of the router + capability TLV."; + } + + container state { + description + "State parameters of TLV 242."; + + leaf instance-number { + type uint32; + description + "A unique instance number for the instance of the + router capabilities TLV. The instance number should + be autogenerated by the producer of the data and may + be renumbered if the entire LSP contents are + replaced in subsequent advertisements."; + } + + leaf router-id { + type inet:ipv4-address; + description + "IPv4 router-id."; + } + + leaf-list flags { + type enumeration { + enum FLOOD { + description + "When the S bit is set(1), the IS - IS Router + CAPABILITY TLV MUST be flooded across the entire + routing domain. When the S bit is not set(0), + the TLV MUST NOT be leaked between levels . This + bit MUST NOT be altered during the TLV + leaking."; + } + enum DOWN { + description + "When the IS-IS Router CAPABILITY TLV is leaked + from level - 2 to level-1, the Down bit MUST be + set. Otherwise, this bit MUST be clear. IS - IS + Router capability TLVs with the Down bit set + MUST NOT be leaked from level - 1 to level-2. + This is to prevent TLV looping."; + } + } + description + "Router capability flags."; + } + } + + container subtlvs { + description + "This container describes router capability TLV + sub-TLVs"; + + list subtlv { + key "type"; + description + "List of subTLV types in the LSDB for the specified + TLV"; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the sub-TLV type"; + } + + container state { + description + "State parameters of IS Router Capabilities"; + + uses isis-lsdb-subtlv-type-state; + } + + container segment-routing-algorithms { + when "../state/type = " + + "'oc-isis-lsdb-types:ROUTER_CAPABILITY_SR_ALGORITHM'" { + description + "Only include segment routing algorithm when the + sub-TLV is type 19."; + } + description + "This container defines SR algorithm sub-TLV 19."; + + reference + "draft-ietf-isis-segment-routing-extensions. + TLV 242, sub-TLV 19"; + + container state { + description + "State parameters of sub-TLV 19 - Segment + Routing Algorithm."; + + leaf-list algorithm { + type enumeration { + enum SPF { + value 0; + description + "Shortest Path First (SPF) algorithm + based on link metric. This is the + well-known shortest path algorithm as + computed by the IS-IS Decision process. + Consistent with the deployed practice + for link-state protocols, algorithm 0 + permits any node to overwrite the SPF + path with a different path based on + local policy."; + } + enum STRICT_SPF { + value 1; + description + "Strict Shortest Path First (SPF) + algorithm based on link metric. The + algorithm is identical to algorithm 0 + but algorithm 1 requires that all nodes + along the path will honor the SPF + routing decision. Local policy MUST NOT + alter the forwarding decision computed + by algorithm 1 at the node claiming to + support algorithm 1."; + } + } + description + "The Segment Routing algorithm that is + described by the TLV."; + } + } + } + + container segment-routing-capability { + when "../state/type = " + + "'oc-isis-lsdb-types:ROUTER_CAPABILITY_SR_CAPABILITY'" { + description + "Only include the SR capability sub-TLV when + the sub-TLV type is 2."; + } + description + "This container defines SR Capability sub-TLV 2."; + + reference + "draft-ietf-isis-segment-routing-extensions. TLV + 242, sub-TLV 2."; + + container state { + description + "State parameters of IS SR Router Capability"; + + leaf-list flags { + type enumeration { + enum IPV4_MPLS { + description + "When set, the router is capable of + processing SR MPLS encapsulated IPv4 + packets on all interfaces."; + } + enum IPV6_MPLS { + description + "When set, the router is capable of + processing SR MPLS encapsulated IPv6 + packets on all interfaces."; + } + enum IPV6_SR { + description + "When set, the router is capable of + processing the IPv6 Segment Routing Header + on all interfaces."; + } + } + description + "Segment Routing Capability Flags."; + } + } + + container srgb-descriptors { + description + "SRGB Descriptors included within the SR + capability sub-TLV"; + + list srgb-descriptor { + key "range"; + description + "Descriptor entry within the SR capabilty + sub-TLV"; + + leaf range { + type leafref { + path "../state/range"; + } + description + "Reference to unique SRGB Descriptor."; + } + + container state { + description + "State parameters of the SR range"; + + leaf range { + type uint32; + description + "Number of SRGB elements. The range + value MUST be greater than 0."; + } + + leaf label { + type oc-mpls-types:mpls-label; + description + "The first value of the SRGB when + expressed as an MPLS label."; + } + } + } + } + } + } + } + uses isis-lsdb-undefined-subtlv; + } + } + + container is-reachability { + when "../state/type = 'oc-isis-lsdb-types:IIS_NEIGHBORS'" { + description + "Include IIS_NEIGHBORS sub-TLV when the TLV type is 2."; + } + description + "This container describes list of ISIS neighbors and + attributes."; + + reference + "ISO 10589, Intermediate System to Intermediate System + Intra- Domain Routeing Exchange Protocol for use in + Conjunction with the Protocol for Providing the + Connectionless-mode Network Service (ISO 8473), + International Standard 10589: 2002, Second Edition, + 2002. TLV 2."; + + container neighbors { + description + "This container describes IS neighbors."; + + list neighbor { + key "system-id"; + description + "IS reachability neighbor attributes."; + + leaf system-id { + type leafref { + path "../state/system-id"; + } + description + "Reference to the system ID of the neighbor."; + } + + uses isis-lsdb-neighbor; + } + } + } + + container ipv4-internal-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV4_INTERNAL_REACHABILITY'" { + description + "Include IPv4 internal reachability TLV when the TLV + type is specified as 128."; + } + description + "This container defines list of IPv4 internal reachability + information."; + + reference + "RFC1195: OSI ISIS for IP and Dual Environments. RFC5302: + Domain-Wide Prefix Distribution with Two-Level IS-IS. TLV + 128"; + + container prefixes { + description + "This container describes IS prefixes."; + + list prefix { + key "prefix"; + + description + "IPv4 prefixes and internal reachability attributes."; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the IPv4 prefix"; + } + + uses ipv4-prefix-attributes-state; + } + } + } + + container ipv4-external-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV4_EXTERNAL_REACHABILITY'" { + description + "Include IPv4 external reachability when the TLV type + is set to 130."; + } + description + "This container defines list of IPv4 external reachability + information."; + + reference + "RFC1195: OSI ISIS for IP and Dual Environments. RFC5302: + Domain-Wide Prefix Distribution with Two-Level IS-IS. TLV + 130"; + + container prefixes { + description + "This container describes IS neighbors."; + + list prefix { + key "prefix"; + + description + "IPv4 external prefixes and reachability attributes."; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the IPv4 prefix."; + } + + uses ipv4-prefix-attributes-state; + } + } + } + + container authentication { + when "../state/type = 'oc-isis-lsdb-types:AUTHENTICATION'" { + description + "Only include the authentication TLV when the TLV is + type 10."; + } + description + "This container defines authentication information of the + node."; + + reference + "ISO 10589 Intermediate System to Intermediate System + Intra- Domain Routeing Exchange Protocol for use in + Conjunction with the Protocol for Providing the + Connectionless-mode Network Service (ISO 8473) + International Standard 10589: 2002, Second Edition, 2002. + TLV 10."; + + container state { + description + "State parameters of TLV 10."; + + leaf crypto-type { + type enumeration { + enum HMAC_MD5 { + description + "HMAC-MD5 Authentication type."; + } + enum CLEARTEXT { + description + "Cleartext Authentication type."; + } + } + description + "Authentication type to be used."; + } + + leaf authentication-key { + type string; + description + "Authentication key to be used."; + } + } + } + + container extended-is-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:EXTENDED_IS_REACHABILITY'" { + description + "Only included the extended IS reachability TLV when the + TLV is type 22."; + } + + description + "This container defines list of ISIS extended reachability + neighbors."; + + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. TLV + 22."; + + uses isis-lsdb-common-extisreach-neighbors; + } + + container extended-ipv4-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:EXTENDED_IPV4_REACHABILITY'" { + description + "Only include the extended IPv4 reachability container + when the TLV type is 135."; + } + description + "This container defines list of IPv4 extended reachability + information."; + + reference + "RFC5305: IS-IS Extensions for Traffic Engineering. TLV + 135"; + + container prefixes { + description + "This container describes IS prefixes."; + + list prefix { + key "prefix"; + + description + "This list describes IPv4 extended prefixes and + attributes."; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the IPv4 prefix that the TLV describes + the attributes of."; + } + + uses ipv4-prefix-extended-state; + } + } + } + + container ipv6-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:IPV6_REACHABILITY'" { + description + "Only include the IPv6 reachability container when the + TLV type is 236."; + } + description + "This container defines list of IPv6 reachability + information."; + + reference + "RFC5308: Routing IPv6 with IS-IS. TLV 236"; + + container prefixes { + description + "This container describes IS prefixes."; + + list prefix { + key "prefix"; + + description + "This list defines IPv6 extended prefix attributes."; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the IPv6 prefix that the TLV + corresponds to."; + } + + uses ipv6-prefix-extended-state; + } + } + } + + container multi-topology { + when "../state/type = 'oc-isis-lsdb-types:MULTI_TOPOLOGY'" { + description + "Only include the multi-topology container when the TLV + is type 229."; + } + + description + "This container defines the topology supported."; + + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in + Intermediate System to Intermediate Systems (IS-ISs). TLV + 229"; + + container topologies { + description + "This container describes IS topologies."; + + list topology { + key "mt-id"; + + description + "This list describes a topology."; + + leaf mt-id { + type leafref { + path "../state/mt-id"; + } + description + "Reference to the multi-topology ID being described + by the list entry."; + } + + container state { + description + "State parameters of IS multi-topology TLV 229."; + + leaf mt-id { + type uint16 { + range "0 .. 4095"; + } + description + "Multi-topology ID."; + } + + leaf attributes { + type enumeration { + enum OVERLOAD { + description + "When set, node is overloaded, still part of + the topology but cannot be used for transit."; + } + enum ATTACHED { + description + "When set, node is attached to another area + using the referred metric and can be used as + default gateway."; + } + } + description + "Attributes of the LSP for the associated + topology."; + } + } + } + } + } + + container isis-neighbor-attribute { + when "../state/type = " + + "'oc-isis-lsdb-types:IS_NEIGHBOR_ATTRIBUTE'" { + description + "Only include the neighbor attribute container when the + TLV is type 23."; + } + description + "This container defines list of ISIS topology neighbors + for extended ISIS LSP (multiple system IDs). "; + + reference + "RFC5311: Simplified Extension of Link State PDU (LSP) + Space for IS-IS. TLV 23. It is identical in format to the + extended IS reachability TLV 22."; + + uses isis-lsdb-common-extisreach-neighbors; + } + + container is-alias-id { + when "../state/type = 'oc-isis-lsdb-types:ISIS_ALIAS_ID'" { + description + "Only include the ISIS alias ID container when the TLV + is type 24."; + } + + description + "This container defines the IS-Alias TLV which allows + extension-capable ISs to recognize the Originating System + of an Extended LSP set. It identifies the Normal system- + id of the Originating System."; + + reference + "RFC5311: Simplified Extension of Link State PDU (LSP) + Space for IS-IS TLV 24."; + + container state { + config false; + description + "State parameters of alias ID."; + + leaf alias-id { + type oc-isis-types:system-id; + description + "List of alias ID(s)."; + } + } + } + + container mt-isn { + when "../state/type = 'oc-isis-lsdb-types:MT_ISN'" { + description + "Only include the MT ISN container when the TLV is type + 222."; + } + description + "This container defines list of ISIS multi-topology + neighbors."; + + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in + Intermediate System to Intermediate Systems (IS-ISs). TLV + 222."; + + uses isis-lsdb-mtis-common; + } + + container mt-isis-neighbor-attribute { + when "../state/type = " + + "'oc-isis-lsdb-types:MT_IS_NEIGHBOR_ATTRIBUTE'" { + description + "Only include the MT ISIS neighbor attribute container + when the TLV is type 223."; + } + + description + "This container defines list of ISIS multi-topology + neighbors."; + + reference + "RFC5311: Simplified Extension of Link State PDU (LSP) + Space for IS-IS. TLV 223. It is identical in format to the + MT-ISN TLV 222."; + + uses isis-lsdb-mtis-common; + } + + container mt-ipv4-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:MT_IPV4_REACHABILITY'" { + description + "Only include the multi-topology IPv4 reachability + container when the TLV is type 235."; + } + description + "This container defines list of IPv4 reachability + Information in multi-topology environment."; + + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in + Intermediate System to Intermediate Systems (IS-ISs). TLV + 235."; + + container prefixes { + description + "This container describes IS prefixes."; + + list prefix { + key "mt-id prefix"; + + leaf mt-id { + type leafref { + path "../state/mt-id"; + } + description + "Reference to the topology ID of the topology that + the prefix is within."; + } + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the prefix to which reachability is + being advertised."; + } + + description + "IPv4 prefixes that are contained within MT + reachability TLV."; + + uses ipv4-mt-prefix-extended-state; + } + } + } + + container mt-ipv6-reachability { + when "../state/type = " + + "'oc-isis-lsdb-types:MT_IPV6_REACHABILITY'" { + description + "Only include the multi-topology IPv6 reachability + container when the TLV is type 237."; + } + description + "This container defines list of IPv6 reachability + information in multi - topology environment."; + + reference + "RFC5120: M-ISIS: Multi Topology (MT) Routing in + Intermediate System to Intermediate Systems (IS-ISs). TLV + 237."; + + container prefixes { + description + "This container describes IS prefixes."; + + list prefix { + key "prefix mt-id"; + description + "List of IPv6 prefixes contained within MT + reachability TLV."; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the IPv6 prefix described by the + TLV."; + } + + leaf mt-id { + type leafref { + path "../state/mt-id"; + } + description + "Reference to the multi-topology ID."; + } + + uses ipv6-mt-prefix-extended-state; + } + } + } + } + } + + uses isis-lsdb-undefined-tlv; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-isis-policy.yang b/src/plugins/yang/openconfig/openconfig-isis-policy.yang new file mode 100644 index 0000000..748b720 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-isis-policy.yang @@ -0,0 +1,189 @@ +module openconfig-isis-policy { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/openconfig-isis-policy"; + + prefix "oc-isis-pol"; + + // import some basic types + import openconfig-routing-policy {prefix rpol; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-isis-types { prefix isis-types; } + + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net "; + + description + "This module contains data definitions for ISIS routing policy. + It augments the base routing-policy module with BGP-specific + options for conditions and actions."; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-05-14" { + description + "Update LSDB model to correct Extended IS reach TLV + bug. This change is backwards incompatible due to + adding an additional level of hierarchy to support + multiple instances of the TLV."; + reference "0.4.0"; + } + + revision "2017-07-26" { + description + "Update LSDB and fix bugs."; + reference "0.3.2"; + } + + revision "2017-05-15" { + description + "Refactor LSDB."; + reference "0.3.0"; + } + + revision "2017-01-13" { + description + "Remove top-level /isis container"; + reference "0.2.1"; + } + + revision "2016-12-15" { + description + "Add segment routing to IS-IS module"; + reference "0.2.0"; + } + + revision "2016-10-18" { + description + "Initial revision of IS-IS models."; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + // grouping statements + + grouping isis-match-conditions { + description + "Criteria used to match IS-IS routes within the policy"; + + container isis-conditions { + description + "Match conditions relating to the IS-IS protocol"; + + container config { + description + "Configuration parameters relating to IS-IS match + conditions"; + + uses isis-match-conditions-config; + } + + container state { + config false; + description + "Operational state parameters relating to IS-IS match + conditions"; + uses isis-match-conditions-config; + } + } + } + + grouping isis-match-conditions-config { + description + "Match conditions for IS-IS"; + + leaf level-eq { + type isis-types:level-number; + description + "Match the level that the IS-IS prefix is within. This can + be used in the case that import or export policies refer + to an IS-IS instance that has multiple levels configured + within it"; + } + } + + grouping isis-actions { + description + "Actions supplied by the IS-IS protocol to be set on a + route within the policy"; + + container isis-actions { + description + "Actions that can be performed by IS-IS within a policy"; + + container config { + description + "Configuration parameters relating to IS-IS actions"; + + uses isis-actions-config; + } + + container state { + config false; + description + "Operational state associated with IS-IS actions"; + + uses isis-actions-config; + } + } + } + + grouping isis-actions-config { + description + "Actions for IS-IS"; + + leaf set-level { + type isis-types:level-number; + description + "Set the level that a prefix is to be imported into."; + } + + leaf set-metric-type { + type isis-types:level-number; + description + "Set the type of metric that is to be specified when the + set metric leaf is specified"; + } + + leaf set-metric { + type isis-types:wide-metric; + description + "Set the metric of the IS-IS prefix"; + } + } + + // augment statements + augment "/rpol:routing-policy/rpol:policy-definitions/" + + "rpol:policy-definition/rpol:statements/rpol:statement/" + + "rpol:actions" { + description "This augments igp-actions with ISIS conditions"; + uses isis-actions; + + } + + augment "/rpol:routing-policy/rpol:policy-definitions/" + + "rpol:policy-definition/rpol:statements/rpol:statement/" + + "rpol:conditions" { + description "This augments igp-conditions with ISIS conditions"; + uses isis-match-conditions; + } + + // rpc statements + + // notification statements +} diff --git a/src/plugins/yang/openconfig/openconfig-isis-routing.yang b/src/plugins/yang/openconfig/openconfig-isis-routing.yang new file mode 100644 index 0000000..84e7a7a --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-isis-routing.yang @@ -0,0 +1,384 @@ +submodule openconfig-isis-routing { + + belongs-to openconfig-isis { + prefix "oc-isis"; + } + + // import some basic types + import openconfig-isis-types { prefix oc-isis-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-mpls-types { prefix oc-mplst; } + import openconfig-segment-routing { prefix oc-sr; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module describes YANG model for ISIS Routing"; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-05-14" { + description + "Update LSDB model to correct Extended IS reach TLV + bug. This change is backwards incompatible due to + adding an additional level of hierarchy to support + multiple instances of the TLV."; + reference "0.4.0"; + } + + revision "2017-07-26" { + description + "Update LSDB and fix bugs."; + reference "0.3.2"; + } + + revision "2017-05-15" { + description + "Refactor LSDB."; + reference "0.3.0"; + } + + revision "2017-01-13" { + description + "Remove top-level /isis container"; + reference "0.2.1"; + } + + revision "2016-12-15" { + description + "Add segment routing to IS-IS module"; + reference "0.2.0"; + } + + revision "2016-10-18" { + description + "Initial revision of IS-IS models."; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + // grouping statements + + grouping rt-admin-config { + description + "Re-usable grouping to enable or disable a particular IS-IS feature."; + + leaf enabled { + type boolean; + description + "When set to true, the functionality within which this leaf is + defined is enabled, when set to false it is explicitly disabled."; + } + } + + grouping isis-afi-safi-config { + description + "This grouping defines Address-Family configuration parameters"; + + leaf afi-name { + type identityref { + base oc-isis-types:AFI_TYPE; + } + description + "Address-family type."; + } + + leaf safi-name { + type identityref { + base oc-isis-types:SAFI_TYPE; + } + description + "Subsequent address-family type."; + } + } + + grouping isis-shortcuts-afi-config { + description + "This grouping defines ISIS Shortcuts configuration parameters"; + + leaf afi-name { + type identityref { + base oc-isis-types:AFI_TYPE; + } + description "Address-family type."; + } + + leaf-list nh-type { + type identityref { + base oc-mplst:PATH_SETUP_PROTOCOL; + } + description "Tunnel NH Type(RSVP,SR). When present it implies + that nh-type shortcut is enabled for a specified AFI."; + } + } + + grouping isis-shortcuts-config { + description + "This grouping defines ISIS Shortcuts consfiguration parameters"; + + container config { + description "This container defines ISIS shortcuts configuration."; + uses rt-admin-config; + } + + container state { + config false; + description "This container defines state for ISIS shortcuts."; + uses rt-admin-config; + } + } + + grouping isis-mt-config { + description + "This grouping defines ISIS multi-topology configuration parameters"; + + leaf afi-name { + type identityref { + base oc-isis-types:AFI_TYPE; + } + description + "Address-family type."; + } + leaf safi-name { + type identityref { + base oc-isis-types:SAFI_TYPE; + } + description + "Subsequent address-family type."; + } + //prefer single topology + } + + + + // *********** STRUCTURE GROUPINGS ********************** + + grouping isis-metric-config { + description + "This grouping defines ISIS metric configuration"; + + leaf metric { + type uint32; + default 10; + description "ISIS metric value(default=10)."; + } + } + + grouping isis-afi-safi-list { + description + "This grouping defines address-family configuration and state + information"; + + list af { + key "afi-name safi-name"; + + description + "Address-family/Subsequent Address-family list."; + + leaf afi-name { + type leafref { + path "../config/afi-name"; + } + description + "Reference to address-family type"; + } + + leaf safi-name { + type leafref { + path "../config/safi-name"; + } + description + "Reference to subsequent address-family type"; + } + + container config { + description + "This container defines AFI-SAFI configuration parameters"; + + uses isis-afi-safi-config; + uses isis-metric-config; + uses rt-admin-config; + } + + container state { + config false; + description + "This container defines AFI-SAFI State information"; + + uses isis-afi-safi-config; + uses isis-metric-config; + uses rt-admin-config; + } + + uses isis-mt-list; + } + } + + grouping isis-if-afi-safi-list { + description + "This grouping defines address-family configuration and state + information"; + + list af { + key "afi-name safi-name"; + + description + "Address-family/Subsequent Address-family list."; + + leaf afi-name { + type leafref { + path "../config/afi-name"; + } + description + "Reference to address-family type"; + } + + leaf safi-name { + type leafref { + path "../config/safi-name"; + } + description + "Reference to subsequent address-family type"; + } + + container config { + description + "This container defines AFI-SAFI configuration parameters. Single + topology is the default setting."; + uses isis-afi-safi-config; + uses isis-metric-config; + uses rt-admin-config; + } + + container state { + config false; + description + "This container defines AFI-SAFI State information"; + uses isis-afi-safi-config; + uses isis-metric-config; + uses rt-admin-config; + } + + uses oc-sr:sr-igp-interface-top; + } + } + + grouping isis-if-global-afi-safi-list { + description + "This grouping defines address-family configuration and state + information"; + + list af { + key "afi-name safi-name"; + + description + "Address-family/Subsequent Address-family list."; + + leaf afi-name { + type leafref { + path "../config/afi-name"; + } + description + "Reference to address-family type"; + } + + leaf safi-name { + type leafref { + path "../config/safi-name"; + } + description + "Reference to subsequent address-family type"; + } + + container config { + description + "This container defines AFI-SAFI configuration parameters. Single + topology is the default setting."; + uses isis-afi-safi-config; + uses rt-admin-config; + } + + container state { + config false; + description + "This container defines AFI-SAFI State information"; + uses isis-afi-safi-config; + uses rt-admin-config; + } + } + } + + grouping isis-shortcuts-afi-list { + description + "This grouping defines ISIS Shorcuts configuration and + state information"; + + list afi { + key "afi-name"; + + description + "Address-family list."; + + leaf afi-name { + type leafref { + path "../config/afi-name"; + } + description + "Reference to address-family type."; + } + + container config { + description + "This container defines ISIS Shortcuts configuration parameters"; + uses isis-shortcuts-afi-config; + } + + container state { + config false; + description + "This container defines ISIS Shortcuts state information"; + uses isis-shortcuts-afi-config; + } + } + } + + grouping isis-mt-list { + description + "This grouping defines multi-topology address-family configuration and + state information. MT0 - IPv4 Unicast, MT2 - IPv6 Unicast, MT3 - + IPv4 Multicast, MT4 - IPv6 Multicast"; + + container multi-topology { + description + "This container defines multi-topology address-family configuration + and state information. ISIS TLV 235, 237."; + + container config { + description + "This container defines AFI-SAFI multi-topology configuration + parameters"; + uses isis-mt-config; + } + + container state { + config false; + description + "This container defines AFI-SAFI multi-topology state information"; + uses isis-mt-config; + uses rt-admin-config; + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-isis-types.yang b/src/plugins/yang/openconfig/openconfig-isis-types.yang new file mode 100644 index 0000000..cdfab1f --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-isis-types.yang @@ -0,0 +1,339 @@ +module openconfig-isis-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/isis-types"; + + prefix "oc-isis-types"; + + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains general data definitions for use in ISIS YANG + model."; + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-05-14" { + description + "Update LSDB model to correct Extended IS reach TLV + bug. This change is backwards incompatible due to + adding an additional level of hierarchy to support + multiple instances of the TLV."; + reference "0.4.0"; + } + + revision "2017-07-26" { + description + "Update LSDB and fix bugs."; + reference "0.3.2"; + } + + revision "2017-05-15" { + description + "Refactor LSDB."; + reference "0.3.0"; + } + + revision "2017-01-13" { + description + "Remove top-level /isis container"; + reference "0.2.1"; + } + + revision "2016-12-15" { + description + "Add segment routing to IS-IS module"; + reference "0.2.0"; + } + + revision "2016-10-18" { + description + "Initial revision of IS-IS models."; + reference "0.1.0"; + } + + // identity statements + identity OVERLOAD_RESET_TRIGGER_TYPE { + description + "Base identify type for triggers that reset Overload Bit"; + } + + identity WAIT_FOR_BGP { + base OVERLOAD_RESET_TRIGGER_TYPE; + description + "Base identity type for resetting Overload Bit when BGP has converged. "; + } + + identity WAIT_FOR_SYSTEM { + base OVERLOAD_RESET_TRIGGER_TYPE; + description + "Base identity type for resetting Overload Bit when system resources have + been restored. "; + } + + identity MT_TYPE { + description + "Base identify type for multi-topology"; + } + + identity SAFI_TYPE { + description + "Base identify type for SAFI"; + } + + identity AFI_TYPE { + description + "Base identify type for AFI"; + } + + identity AFI_SAFI_TYPE { + description + "Base identify type for AFI/SAFI"; + } + + identity IPV4_UNICAST { + base AFI_SAFI_TYPE; + description + "Base identify type for IPv4 Unicast address family"; + } + + identity IPV6_MULTICAST { + base AFI_SAFI_TYPE; + description + "Base identify type for IPv6 multicast address family"; + } + + identity IPV4_MULTICAST { + base AFI_SAFI_TYPE; + description + "Base identify type for IPv4 multicast address family"; + } + + identity IPV6_UNICAST { + base AFI_SAFI_TYPE; + description + "Base identify type for IPv6 unicast address family"; + } + + identity UNICAST { + base SAFI_TYPE; + description + "Base identify type for IPv4 Unicast address family"; + } + + identity MULTICAST { + base SAFI_TYPE; + description + "Base identify type for IPv6 multicast address family"; + } + + identity IPV4 { + base AFI_TYPE; + description + "Base identify type for IPv4 address family"; + } + + identity IPV6 { + base AFI_TYPE; + description + "Base identify type for IPv6 address family"; + } + + // typedef statements + typedef level-type { + type enumeration { + enum LEVEL_1 { + description "This enum describes ISIS level 1"; + } + enum LEVEL_2 { + description "This enum describes ISIS level 2"; + } + enum LEVEL_1_2 { + description "This enum describes ISIS level 1-2"; + } + } + description + "This type defines ISIS level types"; + } + + typedef level-number { + type uint8 { + range "1..2"; + } + description + "This type defines ISIS level."; + } + + typedef adaptive-timer-type { + type enumeration { + enum LINEAR { + description "This enum describes linear algorithm timer"; + } + enum EXPONENTIAL { + description "This enum describes exponential algorithm timer"; + } + } + description + "This type defines ISIS adaptive timer types"; + } + + typedef hello-padding-type { + type enumeration { + enum STRICT { + description "This enum describes strict padding"; + } + enum LOOSE { + description "This enum describes loose padding"; + } + enum ADAPTIVE { + description "This enum describes adaptive padding"; + } + enum DISABLE { + description "This enum disables padding"; + } + } + description + "This type defines ISIS hello padding type"; + } + + typedef circuit-type { + type enumeration { + enum POINT_TO_POINT { + description "This enum describes a point-to-point interface"; + } + enum BROADCAST { + description "This enum describes a broadcast interface"; + } + } + description + "This type defines ISIS interface types "; + } + + typedef metric-type { + type enumeration { + enum INTERNAL { + description "This enum describes internal route type"; + } + enum EXTERNAL { + description "This enum describes external route type"; + } + } + description + "This type defines ISIS metric type"; + } + + typedef wide-metric { + type uint32 { + range "1..16777215"; + } + description + "This type defines ISIS wide metric."; + } + + typedef narrow-metric { + type uint8 { + range "1..63"; + } + description + "This type defines ISIS narrow metric."; + } + + typedef metric-style { + type enumeration { + enum NARROW_METRIC { + description + "This enum describes narrow metric style"; + reference "RFC1195"; + } + enum WIDE_METRIC { + description + "This enum describes wide metric style"; + reference "RFC5305"; + } + } + description + "This type defines ISIS metric styles"; + } + + typedef isis-interface-adj-state { + type enumeration { + enum UP { + description + "This state describes that adjacency is established."; + } + enum DOWN { + description + "This state describes that adjacency is NOT established."; + } + enum INIT { + description + "This state describes that adjacency is establishing."; + } + enum FAILED { + description + "This state describes that adjacency is failed."; + } + } + description + "This type defines the state of the interface."; + } + + typedef net { + type string { + pattern '^[a-fA-F0-9]{2}(\.[a-fA-F0-9]{4}){3,9}\.[a-fA-F0-9]{2}$'; + } + description + "This type defines OSI NET address. A NET should should be in + the form xx.yyyy.yyyy.yyyy.00 with up to 9 sets of yyyy."; + } + + typedef area-address { + type string { + pattern '^[0-9A-Fa-f]{2}\.([0-9A-Fa-f]{4}\.){0,3}$'; + } + description + "This type defines the ISIS area address."; + } + + typedef system-id { + type string { + pattern '^[0-9A-Fa-f]{4}\.[0-9A-Fa-f]{4}\.[0-9A-Fa-f]{4}$'; + } + description + "This type defines ISIS system id using pattern, system id looks + like : 0143.0438.AeF0"; + } + + typedef extended-circuit-id { + type uint32; + description + "This type defines interface circuit ID."; + } + + typedef lsp-id { + type string { + pattern + '^[0-9A-Fa-f]{4}\.[0-9A-Fa-f]{4}\.[0-9A-Fa-f]' + + '{4}\.[0-9][0-9]-[0-9][0-9]$'; + } + description + "This type defines ISIS LSP ID. ISIS LSP ID type should be in + the form of xxxx.xxxx.xxxx.xx-xx"; + } + typedef snpa { + type string { + length "0 .. 20"; + } + description + "This type defines Subnetwork Point of Attachment format."; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-isis.yang b/src/plugins/yang/openconfig/openconfig-isis.yang new file mode 100644 index 0000000..0a0db6b --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-isis.yang @@ -0,0 +1,2059 @@ +module openconfig-isis { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/openconfig-isis"; + + prefix "oc-isis"; + + // import some basic types + import ietf-inet-types { prefix "inet"; } + import ietf-yang-types { prefix "yang"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-isis-types { prefix "oc-isis-types"; } + import openconfig-routing-policy { prefix "oc-rpol"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-interfaces { prefix "oc-if"; } + import openconfig-segment-routing { prefix "oc-sr"; } + // TODO(robjs): Import authentication and keychain following merge of these + // modules. + //import openconfig-authentication-types { prefix "oc-auth-types"; } + //import openconfig-keychain { prefix "oc-keychain"; } + + // Include submodules: + // IS-IS LSP is the LSDB for IS-IS. + include openconfig-isis-lsp; + // IS-IS RT is routing-related features for IS-IS + include openconfig-isis-routing; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net "; + + description + "This module describes a YANG model for ISIS protocol configuration. + It is a limited subset of all of the configuration parameters + available in the variety of vendor implementations, hence it is + expected that it would be augmented with vendor - specific configuration + data as needed. Additional modules or submodules to handle other + aspects of ISIS configuration, including policy, routing, types, + LSDB and additional address families are also expected. This model + supports the following ISIS configuration level hierarchy: + + ISIS + +-> { global ISIS configuration} + +-> levels +-> { level config} + +-> { system-level-counters } + +-> { level link-state-database} + +-> interface +-> { interface config } + +-> { circuit-counters } + +-> { levels config } + +-> { level adjacencies }"; + + oc-ext:openconfig-version "0.4.1"; + + revision "2018-06-05" { + description + "Fix bugs in when statements."; + reference "0.4.1"; + } + + revision "2018-05-14" { + description + "Update LSDB model to correct Extended IS reach TLV + bug. This change is backwards incompatible due to + adding an additional level of hierarchy to support + multiple instances of the TLV."; + reference "0.4.0"; + } + + revision "2017-07-26" { + description + "Update LSDB and fix bugs."; + reference "0.3.2"; + } + + revision "2017-05-15" { + description + "Refactor LSDB."; + reference "0.3.0"; + } + + revision "2017-01-13" { + description + "Remove top-level /isis container"; + reference "0.2.1"; + } + + revision "2016-12-15" { + description + "Add segment routing to IS-IS module"; + reference "0.2.0"; + } + + revision "2016-10-18" { + description + "Initial revision of IS-IS models."; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + // grouping statements + + grouping isis-global-config { + description + "This grouping defines lobal configuration options for ISIS router."; + + // multi-instance + leaf instance { + type string; + default 0; + description + "ISIS Instance."; + } + + leaf-list net { + type oc-isis-types:net; + description + "ISIS network entity title (NET). The first 8 bits are usually + 49 (private AFI), next 16 bits represent area, next 48 bits represent + system id and final 8 bits are set to 0."; + reference + "International Organization for Standardization, Information + technology - Open Systems Interconnection-Network service + Definition - ISO/ IEC 8348:2002."; + } + + leaf maximum-area-addresses { + type uint8; + default 3; + description + "Maximum areas supported."; + } + + leaf level-capability { + type oc-isis-types:level-type; + default "LEVEL_1_2"; + description + "ISIS level capability(level-1, level-2,vlevel-1-2)."; + } + + leaf max-ecmp-paths { + type uint8; + description + "ISIS max-paths count."; + } + + leaf poi-tlv { + type boolean; + default false; + description + "ISIS purge TLV. When set to true, a TLV is added to purges to record + the system ID of the IS generating the purge."; + reference "RFC6232: Purge Originator Identification TLV for IS-IS. TLV 13."; + } + + leaf iid-tlv { + type boolean; + default false; + description + "ISIS Instance Identifier TLV. When set to trues, the IID-TLV identifies + the unique instance as well as the topology/topologies to which the + PDU applies."; + reference "RFC6822: IS-IS Multi-Instance. TLV 7"; + } + + leaf fast-flooding { + type boolean; + default true; + description + "When set to true, IS will always flood the LSP that triggered an SPF + before the router actually runs the SPF computation."; + } + } + + grouping admin-config { + description + "Re-usable grouping to enable or disable a particular IS-IS feature."; + + leaf enabled { + type boolean; + default false; + description + "When set to true, the functionality within which this leaf is + defined is enabled, when set to false it is explicitly disabled."; + } + } + + grouping isis-bfd-config { + description + "This grouping defines Bidirectionl-Forwarding-Detection + configuration."; + + //There is also BFD state under adjacency + leaf bfd-tlv { + type boolean; + description + "When set to true, BFD TLV is used. This enables support for the IS-IS + BFD TLV options, which specify that a BFD session must be established + before an IS-IS adjacency can transition to the established state. + This option should be enabled on all IS-IS neighbors on a shared + interface."; + reference "RFC6213. TLV 148"; + } + reference "RFC5880: Bidirectional Forwarding Detection (BFD)."; + } + + grouping isis-authentication-check-config { + description + "This grouping defines ISIS authentication check."; + + leaf authentication-check { + type boolean; + default true; + description + "When set to true, reject all ISIS protocol PDUs that either have a mismatch + in authentication-type or authentication-key."; + } + } + + grouping isis-metric-style-config { + description + "This grouping defines ISIS metric style."; + + leaf metric-style { + type oc-isis-types:metric-style; + description + "ISIS metric style types(narrow, wide)."; + } + } + + grouping authentication-key-config { + description + "This grouping defines authentication key configuration."; + + leaf auth-password { + type oc-types:routing-password; + description + "Authentication key string."; + } + } + + grouping keychain-base-group { + description + "This grouping defines keychain configuration."; + + container keychain { + description + "This container defines keychain parameters."; + + // TODO(robjs): Import keychain parameters following merge of the auth + // models. + //uses oc-keychain:keychain-common-base; + //uses oc-keychain:tolerance-base; + //uses oc-keychain:keychain-key-base; + } + } + + grouping isis-authentication-config { + description + "This grouping defines ISIS authentication configuration."; + + // TODO(robjs): Add authentication following merge of auth modules. + //leaf auth-type { + // type oc-auth-types:auth-type; + // description + // "ISIS authentication type (key, key-chain)."; + //} + + leaf csnp-authentication { + type boolean; + default false; + description + "Enable or disable for IS-IS CSNPs."; + } + + leaf psnp-authentication { + type boolean; + default false; + description + "Enable or disable authentication for IS-IS PSNPs."; + } + + leaf lsp-authentication { + type boolean; + default false; + description + "Enable or disable authentication for IS-IS LSPs."; + } + } + + grouping isis-authentication-group { + description + "This grouping defines ISIS authentication."; + + container config { + description + "This container defines ISIS authentication configuration."; + + uses isis-authentication-config; + } + + container state { + config false; + description + "This container defines ISIS authentication state."; + + uses isis-authentication-config; + } + + container key { + description + "This container defines ISIS authentication key"; + container config { + description + "This container defines ISIS authentication key configuration."; + + uses authentication-key-group-config { + // TODO(aashaikh): Add auth-type conditions after merge of + // auth models. + // when "../auth-type = 'KEY'"; + } + } + + container state { + config false; + description + "This container defines ISIS authentication key state."; + + uses authentication-key-group-config { + // TODO(aashaikh): Add auth-type conditions after merge of + // auth models. + // when "../auth-type = 'KEY'"; + } + } + } + + uses keychain-base-group { + // TODO(aashaikh): Add auth-type conditions after merge of + // auth models. + // when "../auth-type = 'KEY_CHAIN'"; + } + } + + grouping isis-hello-authentication-config { + description + "Configuration options for IS-IS hello authentication."; + + leaf hello-authentication { + type boolean; + default false; + description + "Enabled or disable ISIS Hello authentication."; + } + + // TODO(robjs): Add hello-auth-type following merge of auth models. + //leaf hello-auth-type { + // type oc-auth-types:auth-type; + // description + // "ISIS authentication type (key, key-chain)."; + //} + } + + grouping isis-hello-authentication-group { + description + "This grouping defines ISIS hello-authentication."; + + container config { + description + "This container defines ISIS authentication configuration."; + + uses isis-hello-authentication-config; + } + + container state { + config false; + description + "This container defines ISIS authentication state."; + + uses isis-hello-authentication-config; + } + + container key { + description + "This container defines ISIS authentication key"; + + container config { + description + "This container defines ISIS authentication key configuration."; + + uses authentication-key-group-config { + // TODO(aashaikh): Add auth-type conditions after merge of + // auth models. + // when "../auth-type = 'KEY'"; + } + } + + container state { + config false; + description + "This container defines ISIS authentication key state."; + + uses authentication-key-group-config { + // TODO(aashaikh): Add auth-type conditions after merge of + // auth models. + // when "../auth-type = 'KEY'"; + } + } + } + + uses keychain-base-group { + // TODO(aashaikh): Add auth-type conditions after merge of + // auth models. + // when "../auth-type = 'KEY_CHAIN'"; + } + } + + grouping isis-ldp-igp-config { + description + "This grouping defines ISIS/LDP Synchronization configuration."; + + leaf enabled { + type boolean; + default true; + description + "When set to true, rely on IGP/LDP synchronization. IGP cost for + link is maintained at max until LDP adjacencies are established "; + reference "RFC5443: LDP IGP Synchronization."; + } + + leaf post-session-up-delay { + type uint16; + units seconds; + description + "Specifies a delay, expressed in units of seconds, + between the LDP session to the IGP neighbor being established, and + it being considered synchronized by the IGP."; + } + } + + grouping isis-te-config { + description + "This grouping defines ISIS Traffic Engineering configuration."; + + leaf ipv4-router-id { + type inet:ipv4-address-no-zone; + description + "IPv4 MPLS Traffic Engineering Router-ID."; + } + + leaf ipv6-router-id { + type inet:ipv6-address-no-zone; + description + "IPv6 MPLS Traffic Engineering Router-ID."; + } + } + + grouping isis-reference-bandwidth-config { + description + "This grouping defines ISIS Reference Bandwidth Configuration."; + + leaf reference-bandwidth { + type uint32; + description + "ISIS Reference Bandwidth value"; + } + } + + grouping isis-overload-bit-set-config { + description + "This grouping defines ISIS Overload Bit."; + + leaf set-bit { + type boolean; + default false; + description + "When set to true, IS-IS overload bit is set."; + } + + leaf set-bit-on-boot { + type boolean; + default false; + description + "When set to true, the IS-IS overload bit is set on system boot."; + } + + leaf advertise-high-metric { + type boolean; + default false; + description + "When set to true, the local IS advertises links with the highest + available metric regardless of their configured metric. The metric + value is based on the metric style - if wide metrics are utilised + the metric is advertised as 16777214, otherwise they are advertised + with a value of 63."; + } + } + + grouping isis-overload-bit-reset-config { + description + "This grouping defines ISIS Overload Bit Reset Triggers"; + + leaf reset-trigger { + type identityref { + base oc-isis-types:OVERLOAD_RESET_TRIGGER_TYPE; + } + description + "In the case that the system sets the overload bit on start, the + system should reset the bit (i.e., clear the overload bit) upon + the specified trigger."; + } + + leaf delay { + type uint16; + units seconds; + description + "If a reset trigger is specified, the system should delay resetting + the overload bit for the specified number of seconds after the + trigger occurs."; + } + } + + grouping isis-attached-bit-config { + description + "This grouping defines ISIS Attached Bit"; + + leaf ignore-bit { + type boolean; + default false; + description + "When set to true, if the attached bit is set on an incoming Level 1 + IS-IS, the local system ignores it. In this case the local system + does not set a default route to the L1L2 router advertising the PDU + with the attached bit set."; + } + + leaf suppress-bit { + type boolean; + default false; + description + "When set to true, if the local IS acts as a L1L2 router, then the + attached bit is not advertised in locally generated PDUs."; + } + } + + grouping overload-bit-group { + description + "This grouping defines ISIS Overload Bit."; + + container config { + description + "This container defines ISIS Overload Bit configuration."; + + uses isis-overload-bit-set-config; + } + + container state { + config false; + description + "This container defines state for ISIS Overload Bit."; + + uses isis-overload-bit-set-config; + } + + container reset-triggers { + description + "This container defines state for ISIS Overload Bit reset triggers"; + + list reset-trigger { + key "reset-trigger"; + + description + "This list describes ISIS Overload reset trigger reasons."; + + leaf reset-trigger { + type leafref { + path "../config/reset-trigger"; + } + description + "Reference to the reset trigger reason"; + } + + container config { + description + "This container defines ISIS Overload Bit reset trigger + configuration."; + + uses isis-overload-bit-reset-config; + } + + container state { + config false; + description + "This container defines state for ISIS Overload Bit reset + triggers."; + + uses isis-overload-bit-reset-config; + } + } + } + } + + + grouping isis-base-level-config { + description + "This grouping defines ISIS Level configuration."; + + leaf level-number { + type oc-isis-types:level-number; + description + "ISIS level number (level-1, level-2)."; + } + } + + grouping isis-interface-level-config { + description + "This grouping defines ISIS Interface Level configuration."; + + leaf level-number { + type oc-isis-types:level-number; + description + "ISIS level number(level-1, level-2)."; + } + + leaf passive { + type boolean; + default false; + description + "ISIS passive interface admin enable/disable function."; + } + + leaf priority { + type uint8 { + range "0 .. 127"; + } + description + "ISIS neighbor priority(LAN hello PDU only)."; + } + } + + grouping isis-hello-timers-config { + description + "This grouping defines ISIS hello timers configuration."; + + leaf hello-interval { + type uint32; + description + "ISIS hello-interval value."; + } + + leaf hello-multiplier { + type uint8; + description + "ISIS hello-multiplier value."; + } + } + + grouping isis-interface-config { + description + "This grouping defines ISIS interface configuration."; + + leaf interface-id { + type oc-if:interface-id; + description + "Interface for which ISIS configuration is to be applied."; + } + + leaf passive { + type boolean; + default false; + description + "When set to true, the referenced interface is a passive interface + such that it is not eligible to establish adjacencies with other + systems, but is advertised into the IS-IS topology."; + } + + leaf hello-padding { + type oc-isis-types:hello-padding-type; + description + "This leaf controls padding type for IS-IS Hello PDUs."; + } + + leaf circuit-type { + type oc-isis-types:circuit-type; + description + "ISIS circuit type (p2p, broadcast)."; + } + } + + grouping isis-adaptive-timers-state { + description + "This grouping defines ISIS adaptive timers state"; + + leaf adaptive-timer { + type oc-isis-types:adaptive-timer-type; + description + "ISIS adaptive timer types (linear, exponential)."; + } + } + + grouping isis-lsp-generation-timers-config { + description + "This grouping defines ISIS LSP Generation timers configuration"; + + leaf lsp-max-wait-interval { + type uint64; + units milliseconds; + description + "Time interval in milliseconds that specifies max interval between + two consecutive occurrences of an LSP being generated."; + } + + leaf lsp-first-wait-interval { + type uint64; + units milliseconds; + description + "Time interval in milliseconds that specifies the first LSP generation + delay."; + } + + leaf lsp-second-wait-interval { + type uint64; + units milliseconds; + description + "Time interval in milliseconds that specifies the millisecond LSP + generation delay."; + } + } + + grouping isis-lsp-timers-config { + description + "This grouping defines ISIS LSP timers configuration"; + + leaf lsp-lifetime-interval { + type uint16; + units seconds; + default 1200; + description + "Time interval in seconds that specifies how long an LSP remains in + LSDB without being refreshed."; + } + + leaf lsp-refresh-interval { + type uint16; + units seconds; + description + "Time interval in seconds that specifies how often route topology + that a device originates is transmitted in LSPs."; + } + } + + grouping isis-spf-timers-config { + description + "This grouping defines ISIS SPF timers configuration."; + + leaf spf-hold-interval { + type uint64; + units milliseconds; + default 5000; + description + "SPF Hold Down time interval in milliseconds."; + } + + leaf spf-first-interval { + type uint64; + units milliseconds; + description + "Time interval in milliseconds between the + detection of topology change and when the SPF algorithm runs."; + } + leaf spf-second-interval { + type uint64; + units milliseconds; + description + "Time interval in milliseconds between the first and second + SPF calculation."; + } + } + + grouping isis-interface-timers-config { + description + "This grouping defines ISIS interface timers configuration."; + + leaf csnp-interval { + type uint16; + units seconds; + description + "The interval, specified in seconds, at which periodic CSNP packets + should be transmitted by the local IS."; + } + + leaf lsp-pacing-interval { + type uint64; + units milliseconds; + description + "The interval interval in milliseconds between the + detection of topology change and when the SPF algorithm runs."; + } + } + + grouping isis-transport-config { + description + "This grouping defines configuration parameters relating to the + transport protocol used by the ISIS."; + + leaf lsp-mtu-size { + type uint16; + description + "The maximum size in bytes of an IS-IS Link state PDU."; + } + } + + grouping isis-graceful-restart-config { + description + "This grouping defines ISIS graceful restart configuration."; + + leaf helper-only { + type boolean; + description + "Enable or disable the IS-IS graceful restart helper function. When + this leaf is set, the local system does not utilise the IS-IS + graceful restart procedures during its own restart, but supports + retaining forwarding information during a remote speaker's restart."; + } + reference "RFC 5306: Restart Signaling for IS-IS."; + } + + // configuration context containers + grouping inter-level-propagation-policies-structural { + description + "Propagate prefixes between IS-IS levels."; + + container inter-level-propagation-policies { + description + "Policies to propagate prefixes between IS-IS levels."; + + container level1-to-level2 { + description + "Policies relating to prefixes to be propagated from + Level 1 to Level 2."; + + container config { + description + "Configuration parameters relating to the propagation + of prefixes from IS-IS Level 1 to Level 2."; + + uses inter-level-propagation-policy-config; + } + + container state { + config false; + description + "Operational state parameters relating to the + propagation of prefixes from IS-IS Level 1 to Level 2."; + + uses inter-level-propagation-policy-config; + } + + } + + container level2-to-level1 { + description + "Policies relating to prefixes to be propagated from + Level2 to Level 1."; + + container config { + description + "Configuration parameters relating to the propagation + of prefixes from IS-IS Level 2 to Level 1."; + + uses inter-level-propagation-policy-config; + } + + container state { + config false; + description + "Operational state parameters relating to the propagation + of prefixes from IS-IS Level 2 to Level 1."; + + uses inter-level-propagation-policy-config; + } + } + } + } + + grouping inter-level-propagation-policy-config { + description + "Policy governing the propagation of prefixes between levels."; + + uses oc-rpol:apply-policy-import-config; + } + + grouping authentication-key-group-config { + description + "This grouping defines ISIS authentication key configuration."; + + uses authentication-key-config; + + // TODO(robjs): Add crypto-algorithm after merge of authentication modules. + //leaf crypto-algorithm { + // type identityref { + // base oc-auth-types:CRYPTO_TYPE; + // } + // description + // "Authentication key cryptographic algorithm to be used for key encryption."; + //} + } + + grouping isis-global-base { + description + "This grouping describes ISIS Global router."; + + container config { + description + "This container defines ISIS global configuration router."; + + uses isis-authentication-check-config; + uses isis-global-config; + } + + container state { + config false; + description + "This container defines state for ISIS global router."; + + uses isis-authentication-check-config; + uses isis-global-config; + } + + container lsp-bit { + description + "This container defines ISIS LSP Operational Bits."; + + container overload-bit { + description + "This container defines Overload Bit configuration."; + uses overload-bit-group; + } + + container attached-bit { + description + "This container defines Attached Bit."; + + container config { + description + "This container defines Attached Bit configuration."; + + uses isis-attached-bit-config; + } + + container state { + config false; + description + "This container defines state for Link State PDU Bit."; + + uses isis-attached-bit-config; + } + } + } + + container reference-bandwidth { + description + "This container defines ISIS Reference Bandwidth."; + + container config { + description + "This container defines Reference Bandwidth configuration"; + uses isis-reference-bandwidth-config; + } + + container state { + config false; + description + "This container defines state for Reference Bandwidth."; + + uses isis-reference-bandwidth-config; + } + } + + container nsr { + description + "This container defines ISIS Non-Stop Routing."; + + container config { + description + "This container defines Non-Stop-Routing configuration."; + + uses admin-config; + } + + container state { + config false; + description + "This container defines state for Non-Stop-Routing"; + + uses admin-config; + } + } + + container graceful-restart { + description + "This container defines ISIS Graceful Restart."; + + container config { + description + "This container defines ISIS graceful-restart configuration."; + + uses admin-config; + uses isis-graceful-restart-config; + } + + container state { + config false; + description + "This container defines state information for ISIS graceful-restart."; + + uses admin-config; + uses isis-graceful-restart-config; + } + } + + container timers { + description + "This container defines ISIS timers."; + + container config { + description + "This container defines ISIS global timers configuration."; + + uses isis-lsp-timers-config; + } + + container state { + config false; + description + "This container defines state information for ISIS global timers."; + + uses isis-lsp-timers-config; + } + + container spf { + description + "This container defines ISIS SPF timer settings."; + + container config { + description + "This container defines ISIS SPF timers configuration."; + + uses isis-spf-timers-config; + } + + container state { + config false; + description + "This container defines state information for ISIS SPF timers."; + + uses isis-spf-timers-config; + uses isis-adaptive-timers-state; + } + } + + container lsp-generation { + description + "This container defines ISIS LSP Generation."; + + container config { + description + "This container defines ISIS LSP Generation timers + configuration."; + + uses isis-lsp-generation-timers-config; + } + + container state { + config false; + description + "This container defines state information for ISIS LSP Generation + timers."; + + uses isis-lsp-generation-timers-config; + uses isis-adaptive-timers-state; + } + } + } + + container transport { + description + "This container defines ISIS transport."; + + container config { + description + "This container defines ISIS transport related configuration."; + + uses isis-transport-config; + } + + container state { + config false; + description + "This container defines state information for ISIS transport + parameters."; + + uses isis-transport-config; + } + } + + container mpls { + description + "Configuration and operational state relating to MPLS-related + features in IS-IS"; + + container igp-ldp-sync { + description + "Configuration and operational state relating to synchronisation + between the LDP and IS-IS"; + + container config { + description + "This container defines ISIS/IGP configuration."; + + uses isis-ldp-igp-config; + } + + container state { + config false; + description + "This container defines state information for ISIS/LDP Sync."; + + uses isis-ldp-igp-config; + } + } + } + + container igp-shortcuts { + description + "This container defines IGP shortcuts configuration and state + information."; + + uses isis-shortcuts-afi-list; + } + + container afi-safi { + description + "This container defines address-family specific configuration + and state information."; + + uses isis-afi-safi-list; + } + + uses oc-sr:sr-igp-top; + } + + grouping isis-route-preference-config { + description + "This grouping defines ISIS route preference configuration"; + + leaf external-route-preference { + type uint8 { + range "1..max"; + } + description + "Administrative Distance(preference) for external ISIS routes."; + } + + leaf internal-route-preference { + type uint8 { + range "1..max"; + } + description + "Administrative Distance(preference) for internal ISIS routes."; + } + } + + grouping isis-interfaces { + description + "This grouping defines ISIS interfaces configured on local system."; + + list interface { + key "interface-id"; + + description + "This list contains ISIS interfaces."; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "Reference to interface-id"; + } + + uses isis-interface-group; + uses oc-if:interface-ref; + } + } + + grouping isis-interface-group { + description + "This grouping defines ISIS interfaces configured on local system."; + + container config { + description + "This container defines ISIS interface configuration."; + + uses admin-config; + uses isis-interface-config; + } + + container state { + config false; + description + "This container defines state information for ISIS interfaces."; + + uses admin-config; + uses isis-interface-config; + } + + container circuit-counters { + description + "This container defines state information for ISIS circuit counters."; + + uses circuit-counters-structural; + } + + container authentication { + description + "This container defines ISIS authentication."; + + uses isis-hello-authentication-group; + } + + container afi-safi { + description + "This container defines address-family specific configuration + and state information."; + + uses isis-if-global-afi-safi-list; + } + + container levels { + description + "This container defines ISIS level specific configuration and + state information."; + + uses isis-interface-levels; + } + + container timers { + description + "This container describes ISIS interface timers configuration"; + + container config { + description + "Configuration parameters relating to interface + timers for IS-IS"; + + uses isis-interface-timers-config; + } + + container state { + config false; + description + "This container defines state information for ISIS interface timers."; + + uses isis-interface-timers-config; + } + } + + container bfd { + //TODO(bogdanov): Integrate BFD model/module + description + "This container defines BFD."; + + container config { + description + "This container defines BFD configuration parameters."; + + uses isis-bfd-config; + } + + container state { + config false; + description + "This container defines BFD state information."; + + uses isis-bfd-config; + } + } + } + + grouping isis-levels { + description + "This grouping defines global ISIS Levels."; + + list level { + key "level-number"; + + description + "Configuration and operational state parameters related to a + particular level within the IS-IS protocol instance"; + + leaf level-number { + type leafref { + path "../config/level-number"; + } + description + "Reference to ISIS level-number."; + } + + uses isis-level-group; + } + } + + grouping isis-interface-levels { + description + "This grouping defines ISIS interface Levels."; + + list level { + key "level-number"; + description + "Configuration and operational state parameters related to a + particular level on an IS-IS enabled interface."; + + leaf level-number { + type leafref { + path "../config/level-number"; + } + description + "Reference to ISIS level-number."; + } + + uses isis-interface-level-group; + } + } + + grouping isis-level-group { + description + "This grouping defines ISIS level configuration and state + information."; + + container config { + description + "This container defines ISIS level based configuration."; + + uses admin-config; + uses isis-base-level-config; + uses isis-metric-style-config; + uses isis-authentication-check-config; + } + + container state { + config false; + description + "This container defines ISIS level state information."; + + uses admin-config; + uses isis-base-level-config; + uses isis-metric-style-config; + uses isis-authentication-check-config; + } + + container system-level-counters { + description + "This container defines ISIS system level counters."; + + uses system-level-counters-structural; + } + + container link-state-database { + config false; + description + "This container defines ISIS LSDB."; + + list lsp { + key "lsp-id"; + description + "This list describes LSPs in the LSDB."; + uses lsp-state; + } + } + + container traffic-engineering { + description + "This container defines ISIS TE."; + + container config { + description + "This container defines ISIS TE configuration."; + + uses admin-config; + uses isis-te-config; + } + + container state { + config false; + description + "This container defines ISIS TE state information."; + + uses admin-config; + uses isis-te-config; + } + } + + container route-preference { + description + "This container defines Administrative Distance (or preference) + assigned to ISIS routes (level1 internal, level2 internal, level1 + external, level2 external)."; + + container config { + description + "This container defines route preference configuration."; + uses isis-route-preference-config; + } + + container state { + config false; + description + "This container defines ISIS route preference state information."; + uses isis-route-preference-config; + } + } + + container authentication { + description + "This container defines ISIS authentication."; + uses isis-authentication-group; + } + + } + + grouping isis-interface-level-group { + description + "This grouping defines ISIS interface level."; + + container config { + description + "This container defines interface ISIS level configuration."; + + uses isis-interface-level-config; + uses admin-config; + } + + container state { + config false; + description + "This container defines interface ISIS level state information."; + + uses isis-interface-level-config; + uses admin-config; + } + + container packet-counters { + description + "This container defines ISIS interface packet counters."; + + uses packet-counters-structural; + } + + container adjacencies { + config false; + description + "This container defines ISIS adjacencies."; + + list adjacency { + key "system-id"; + + description + "List of the local system's IS-IS adjacencies."; + + leaf system-id { + type leafref { + path "../state/system-id"; + } + description + "Reference to the IS neighbor."; + } + + container state { + description + "Operational state relating to the IS-IS adjacency with the + remote system"; + + uses adjacency-state; + } + } + } + + container timers { + description + "This container defines ISIS timers."; + + container config { + description + "This container defines ISIS interface hello-timers configuration."; + + uses isis-hello-timers-config; + } + + container state { + config false; + description + "This container defines ISIS interface hello-timers state."; + + uses isis-hello-timers-config; + } + } + + container afi-safi { + description + "This container defines address-family specific configuration + and state information."; + + uses isis-if-afi-safi-list; + } + + container hello-authentication { + description + "This container defines ISIS authentication."; + + uses isis-hello-authentication-group; + } + } + + + grouping isis-top { + description + "This grouping define top-level ISIS model data."; + + container isis { + description + "This container defines top-level ISIS configuration and state + information."; + + container global { + description + "This container defines global ISIS configuration and state + information."; + + uses isis-global-base; + uses inter-level-propagation-policies-structural; + } + + container levels { + description + "This container defines ISIS level configuration and state + information."; + uses isis-levels; + } + + container interfaces { + description + "This container defines global ISIS interface configuration and + state information."; + uses isis-interfaces; + } + } + } + + grouping adjacency-state { + description + "This grouping defines ISIS adjacency."; + + leaf system-id { + type oc-isis-types:system-id; + description + "ISIS neighbor system-id."; + } + + leaf neighbor-ipv4-address { + type inet:ipv4-address-no-zone; + description + "ISIS Neighbor IPv4 address."; + } + + leaf neighbor-ipv6-address { + type inet:ipv6-address-no-zone; + description + "ISIS Neighbor IPv6 address."; + } + + leaf neighbor-snpa { + type oc-isis-types:snpa; + description + "ISIS neighbor SNPA."; + } + + leaf local-extended-circuit-id { + type oc-isis-types:extended-circuit-id; + description + "Local extended circuit ID."; + } + leaf neighbor-extended-circuit-id { + type oc-isis-types:extended-circuit-id; + description + "ISIS neighbor extended circuit ID."; + } + + leaf priority { + type uint8 { + range "0..127"; + } + description + "Priority of the neighboring IS(LAN Hello only)."; + } + + leaf dis-system-id { + type oc-isis-types:system-id; + description + "DIS System ID(LAN hello only)."; + } + + leaf neighbor-circuit-type { + type oc-isis-types:level-type; + description + "Received ISIS circuit type (level-1, level-2, level-1-2)."; + } + + leaf adjacency-type { + type oc-isis-types:level-type; + description + "Formed ISIS adjacency type(level-1, level-2, level-1-2)."; + } + + leaf adjacency-state { + type oc-isis-types:isis-interface-adj-state; + description + "P2P 3-way ISIS adjacency state(up, down, init, failed)."; + reference "RFC4303. TLV 240."; + } + + leaf remaining-hold-time { + type uint16; + units seconds; + description + "Holding time in seconds for adjacency. This value is based on received + hello PDUs and the elapsed time since receipt."; + } + + leaf up-time { + type yang:timestamp; + description + "Adjacency up time."; + } + + leaf multi-topology { + type boolean; + description + "When set to true, ISIS multi-topology is supported."; + reference "RFC5129. TLV 229."; + } + + leaf-list topology { + type identityref { + base oc-isis-types:AFI_SAFI_TYPE; + } + description + "ISIS topology type support(ipv4-unicast, ipv6-unicast, + ipv4-multicast, ipv6-multicast)."; + } + + leaf restart-support { + type boolean; + description + "When set to true, Graceful-restart signaling is supported."; + } + + leaf restart-suppress { + type boolean; + description + "When set to true, adjacency is not advertised. The SA bit is used by a + starting router to request that its neighbor suppress advertisement of + the adjacency to the starting router in the neighbor's LSPs."; + } + + leaf restart-status { + type boolean; + description + "When set to true, neighbor is being helped. The RR bit is used by a + (re)starting router to signal to its neighbors that a (re)start is in + progress."; + } + + leaf-list area-address { + type oc-isis-types:area-address; + description + "List of ISIS area-address(es)."; + } + + leaf-list nlpid { + type enumeration { + enum IPV4 { + description + "IPv4 Address family."; + } + enum IPV6 { + description + "IPv6 Address family."; + } + } + description + "Supported Protocol. IPv4 is defined as (0xcc) + and IPv6 - (0x8e). ISIS reference is TLV 129."; + } + + // TODO(bogdanov): update when BFD model is integrated. + //leaf ipv4-bfd-status { + //type oc-isis-types:bfd-state; + //description + // "IPv4 BFD session status."; + //} + //leaf ipv6-bfd-status { + //type oc-isis-types:bfd-state; + //description + // "IPv4 BFD session status. "; + //} + + } + + grouping packet-counters-generic-state { + description + "Operational state parameters relating to LSP packet counters."; + + leaf received { + type yang:counter32; + description + "The number of the specified type of PDU received on the interface."; + } + leaf processed { + type yang:counter32; + description + "The number of the specified type of PDU received on the interface + that have been processed by the local system."; + } + leaf dropped { + type yang:counter32; + description + "The number of the specified type of PDU received on the interface + that have been dropped."; + } + + leaf sent { + type yang:counter32; + description + "The number of the specified type of PDU that have been sent by the + local system on the interface."; + } + + leaf retransmit { + type yang:counter32; + description + "The number of the specified type of PDU that that have been + retransmitted by the local system on the interface."; + } + } + + grouping packet-counters-structural { + description + "This grouping defines ISIS packet counter state."; + + container lsp { + description + "This container defines LSP packet counters."; + + container state { + config false; + description + "This container defines LSP PDU counters."; + + uses packet-counters-generic-state; + } + } + + container iih { + description + "This container defines IIH packet counters."; + + container state { + config false; + description + "Operational counters relating to IIH PDUs"; + + uses packet-counters-generic-state; + } + } + + container ish { + description + "This container defines ISH packet counters."; + + container state { + config false; + description + "Operational state relating to ISH PDUs."; + + uses packet-counters-generic-state; + } + } + + container esh { + description + "This container defines ESH packet counters."; + container state { + config false; + description + "Operational state relating to ESH PDUs"; + + uses packet-counters-generic-state; + } + } + + container psnp { + description + "This container defines PSNP packet counters."; + + container state { + config false; + description + "Packet counters relating to PSNPs."; + + uses packet-counters-generic-state; + } + } + + container csnp { + description + "Operational state parameters relating to CSNPs."; + + container state { + config false; + description + "Packet counters relating to CSNPs."; + + uses packet-counters-generic-state; + } + } + + container unknown { + description + "Operational state parameters relating to IS-IS PDUs that are not + otherwise classified - referred to as Unknown PDUs."; + + container state { + config false; + description + "Packet counters relating to unknown PDUs."; + + uses packet-counters-generic-state; + } + } + } + + grouping system-level-counters-state { + description + "IS-IS counters that are relevant to the system IS-IS context."; + + leaf corrupted-lsps { + type yang:counter32; + description + "Number of corrupted in-memory LSPs detected. LSPs received from the + wire with a bad checksum are silently dropped and not counted. LSPs + received from the wire with parse errors are counted by lsp-errors. MIB + Entry: SysCorrLSPs."; + } + + leaf database-overloads { + type yang:counter32; + description + "Number of times the database has become + overloaded. + MIB entry: SysLSPL(Level)DbaseOloads."; + } + + leaf manual-address-drop-from-areas { + type yang:counter32; + description + "Number of times a manual address has been dropped from area. + MIB Entry: SysManAddrDropFromAreas."; + } + + leaf exceed-max-seq-nums { + type yang:counter32; + description + "The number of times the system has attempted to exceed the maximum + sequence number. MIB Entry: SysAttmptToExMaxSeqNums."; + } + leaf seq-num-skips { + type yang:counter32; + description + "Number of times a sequence number skip has occurred. MIB Entry: + SysSeqNumSkips."; + } + + leaf own-lsp-purges { + type yang:counter32; + description + "Number of times a zero-aged copy of the system's + own LSP is received from some other node. + MIB Entry: isisSysOwnLSPPurges."; + } + + leaf id-len-mismatch { + type yang:counter32; + description + "Number of times a PDU is received with a different value for ID field + length from that of the receiving system. MIB Entry: + isisSysIDFieldLenMismatches."; + } + + leaf part-changes { + type yang:counter32; + description + "The number of partition changes detected. MIB Entry: SysPartChanges."; + } + + leaf max-area-address-mismatches { + type yang:counter32; + description + "Number of times a PDU is received with a different value for + MaximumAreaAddresses from that of the receiving system. MIB Entry: + SysMaxAreaAddrMismatches."; + } + + leaf auth-fails { + type yang:counter32; + description + "The number of authentication key failures. + MIB Entry: SysAuthFails."; + } + + leaf spf-runs { + type yang:counter32; + description + "The number of times SPF was ran at this level."; + } + + leaf auth-type-fails { + type yang:counter32; + description + "The number of authentication type mismatches."; + } + + leaf lsp-errors { + type yang:counter32; + description + "The number of received LSPs with errors."; + } + } + + grouping system-level-counters-structural { + description + "This grouping defines system level counters."; + + container state { + config false; + description + "The container defines a list of system counters for the IS."; + + uses system-level-counters-state; + } + } + + grouping circuit-counters-state { + description + "Operational state parameters relating to counters specific to one + interface or circuit."; + + leaf adj-changes { + type yang:counter32; + description + "Number of times an adjacency state change has occurred on this circuit. + MIB Entry: CircAdjChanges."; + } + + leaf init-fails { + type yang:counter32; + description + "Number of times initialization of this circuit has failed. This counts + events such as PPP NCP failures. MIB Entry: CircInitFails."; + } + + leaf rejected-adj { + type yang:counter32; + description + "Number of times an adjacency has been rejected on this circuit. MIB + Entry: CircRejAdjs."; + } + + leaf id-field-len-mismatches { + type yang:counter32; + description + "Number of times an IS-IS control PDU with an ID field length different + from that for this system has been received. + MIB Entry: CircIDFieldLenMismatches."; + } + + leaf max-area-address-mismatches { + type yang:counter32; + description + "Number of times an IS-IS control PDU with a max area address field + different from that for this system has been received. MIB Entry: + CircMaxAreaAddrMismatches."; + } + + leaf auth-type-fails { + type yang:counter32; + description + "Number of times an IS-IS control PDU with an auth type field different + from that for this system has been received. MIB Entry: + CircAuthTypeFails."; + } + + leaf auth-fails { + type yang:counter32; + description + "Number of times an IS-IS control PDU with the correct auth type has + failed to pass authentication validation. MIB Entry: CircAuthFails."; + } + + leaf lan-dis-changes { + type yang:counter32; + description + "Number of times the Designated IS has changed on this circuit at this + level. If the circuit is point to point, this count is zero. MIB Entry: + CircLANDesISChanges."; + } + + leaf adj-number { + type uint32; + description + "Number of adjacencies on this circuit. + MIB Entry: CircNumAdj."; + } + } + + grouping circuit-counters-structural { + description + "This grouping defines circuit counters."; + + container state { + config false; + description + "The container defines a list of counters for IS circuit."; + + uses circuit-counters-state; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-lacp.yang b/src/plugins/yang/openconfig/openconfig-lacp.yang new file mode 100644 index 0000000..e49dcb6 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-lacp.yang @@ -0,0 +1,461 @@ +module openconfig-lacp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/lacp"; + + prefix "oc-lacp"; + + // import some basic types + import openconfig-interfaces { prefix oc-if; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-extensions { prefix oc-ext; } + + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module describes configuration and operational state + data for Link Aggregation Control Protocol (LACP) for + managing aggregate interfaces. It works in conjunction with + the OpenConfig interfaces and aggregate interfaces models."; + + oc-ext:openconfig-version "1.1.0"; + + revision "2017-05-05" { + description + "Add member local and remote port num"; + reference "1.1.0"; + } + + revision "2016-05-26" { + description + "OpenConfig public release"; + reference "1.0.2"; + } + + + // typedef statements + + typedef lacp-activity-type { + type enumeration { + enum ACTIVE { + description + "Interface is an active member, i.e., will detect and + maintain aggregates"; + } + enum PASSIVE { + description + "Interface is a passive member, i.e., it participates + with an active partner"; + } + } + description + "Describes the LACP membership type, active or passive, of the + interface in the aggregate"; + reference "IEEE 802.1AX-2008"; + } + + typedef lacp-timeout-type { + type enumeration { + enum LONG { + description + "Participant wishes to use long timeouts to detect + status of the aggregate, i.e., will expect less frequent + transmissions. Long timeout is 90 seconds."; + } + enum SHORT { + description + "Participant wishes to use short timeouts, i.e., expects + frequent transmissions to aggressively detect status + changes. Short timeout is 3 seconds."; + } + } + description + "Type of timeout used, short or long, by LACP participants"; + reference "IEEE 802.1AX-2008"; + } + + typedef lacp-synchronization-type { + type enumeration { + enum IN_SYNC { + description + "Participant is in sync with the system id and key + transmitted"; + } + enum OUT_SYNC { + description + "Participant is not in sync with the system id and key + transmitted"; + } + } + description + "Indicates LACP synchronization state of participant"; + reference "IEEE 802.1AX-2008"; + } + + typedef lacp-period-type { + type enumeration { + enum FAST { + description "Send LACP packets every second"; + } + enum SLOW { + description "Send LACP packets every 30 seconds"; + } + } + description + "Defines the period options for the time between sending + LACP messages"; + reference "IEEE 802.3ad"; + } + + // grouping statements + + + grouping aggregation-lacp-members-config { + description + "Configuration data for lacp member interfaces"; + + //currently a placeholder -- the list of member interfaces + //and their status is considered opstate only + } + + grouping aggregation-lacp-members-state { + description + "Operational status data for the member interfaces"; + + leaf interface { + type oc-if:base-interface-ref; + description + "Reference to interface member of the LACP aggregate"; + } + + leaf activity { + type lacp-activity-type; + description "Indicates participant is active or passive"; + } + + leaf timeout { + type lacp-timeout-type; + description + "The timeout type (short or long) used by the + participant"; + } + + leaf synchronization { + type lacp-synchronization-type; + description + "Indicates whether the participant is in-sync or + out-of-sync"; + } + + leaf aggregatable { + type boolean; + description + "A true value indicates that the participant will allow + the link to be used as part of the aggregate. A false + value indicates the link should be used as an individual + link"; + } + + leaf collecting { + type boolean; + description + "If true, the participant is collecting incoming frames + on the link, otherwise false"; + } + + leaf distributing { + type boolean; + description + "When true, the participant is distributing outgoing + frames; when false, distribution is disabled"; + } + + leaf system-id { + type oc-yang:mac-address; + description + "MAC address that defines the local system ID for the + aggregate interface"; + } + + leaf oper-key { + type uint16; + description + "Current operational value of the key for the aggregate + interface"; + } + + leaf partner-id { + type oc-yang:mac-address; + description + "MAC address representing the protocol partner's interface + system ID"; + } + + leaf partner-key { + type uint16; + description + "Operational value of the protocol partner's key"; + } + + leaf port-num { + type uint16; + description + "Port number of the local (actor) aggregation member"; + } + + leaf partner-port-num { + type uint16; + description + "Port number of the partner (remote) port for this member + port"; + } + } + +grouping aggregation-lacp-members-statistics { + description + "LACP packet statistics for the member interfaces"; + + container counters { + description + "LACP protocol counters"; + + leaf lacp-in-pkts { + type oc-yang:counter64; + description + "Number of LACPDUs received"; + } + + leaf lacp-out-pkts { + type oc-yang:counter64; + description + "Number of LACPDUs transmitted"; + } + + leaf lacp-rx-errors { + type oc-yang:counter64; + description + "Number of LACPDU receive packet errors"; + } + + leaf lacp-tx-errors { + type oc-yang:counter64; + description + "Number of LACPDU transmit packet errors"; + } + + leaf lacp-unknown-errors { + type oc-yang:counter64; + description + "Number of LACPDU unknown packet errors"; + } + + leaf lacp-errors { + type oc-yang:counter64; + description + "Number of LACPDU illegal packet errors"; + } + } + } + + grouping aggregation-lacp-members-top { + description + "Top-level grouping for aggregate members list"; + + container members { + config false; + description + "Enclosing container for the list of members interfaces of + the aggregate. This list is considered operational state + only so is labeled config false and has no config container"; + + list member { + key "interface"; + description + "List of member interfaces and their associated status for + a LACP-controlled aggregate interface. Member list is not + configurable here -- each interface indicates items + its participation in the LAG."; + + leaf interface { + type leafref { + path "../state/interface"; + } + description + "Reference to aggregate member interface"; + } + + + container state { + + config false; + + description + "Operational state data for aggregate members"; + + uses aggregation-lacp-members-state; + uses aggregation-lacp-members-statistics; + } + } + } + } + + grouping lacp-interfaces-config { + description + "Configuration data for each LACP-enabled interface"; + + leaf name { + type oc-if:base-interface-ref; + description + "Reference to the interface on which LACP should be + configured. The type of the target interface must be + ieee8023adLag"; + } + + leaf interval { + type lacp-period-type; + default SLOW; + description + "Set the period between LACP messages -- uses + the lacp-period-type enumeration."; + } + + leaf lacp-mode { + type lacp-activity-type; + default ACTIVE; + description + "ACTIVE is to initiate the transmission of LACP packets. + PASSIVE is to wait for peer to initiate the transmission of + LACP packets."; + //TODO:some implementations configure the LACP mode on each + //member interface rather than on the LAG interface. There + //may be use cases for this identified at a later time. + } + + leaf system-id-mac { + type oc-yang:mac-address; + description + "The MAC address portion of the node's System ID. This is + combined with the system priority to construct the 8-octet + system-id"; + } + + uses aggregation-lacp-global-config; + } + + grouping lacp-interfaces-state { + description + "Operational state data for each LACP-enabled interface"; + } + + grouping lacp-interfaces-top { + description + "Top-level grouping for LACP-enabled interfaces"; + + container interfaces { + description + "Enclosing container for the list of LACP-enabled + interfaces"; + + list interface { + key "name"; + description + "List of aggregate interfaces managed by LACP"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for each LACP aggregate interface"; + + uses lacp-interfaces-config; + } + + container state { + + config false; + + description + "Operational state data for each LACP aggregate + interface"; + + uses lacp-interfaces-config; + uses lacp-interfaces-state; + } + + uses aggregation-lacp-members-top; + } + } + } + + grouping aggregation-lacp-global-config { + description + "Configuration data for LACP aggregate interfaces"; + + + leaf system-priority { + type uint16; + description + "Sytem priority used by the node on this LAG interface. + Lower value is higher priority for determining which node + is the controlling system."; + } + } + + grouping aggregation-lacp-global-state { + description + "Operational data for LACP aggregate interfaces"; + + } + + grouping aggregation-lacp-top { + description + "Top level configuration and state variable containers for + LACP data"; + + container lacp { + description + "Configuration and operational state data for LACP protocol + operation on the aggregate interface"; + + container config { + description + "Configuration data for LACP"; + + uses aggregation-lacp-global-config; + } + + container state { + + config false; + description + "Operational state data for LACP"; + + uses aggregation-lacp-global-config; + uses aggregation-lacp-global-state; + } + uses lacp-interfaces-top; + } + } + + // data definition statements + uses aggregation-lacp-top; + + // augment statements + + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-lldp-types.yang b/src/plugins/yang/openconfig/openconfig-lldp-types.yang new file mode 100644 index 0000000..cc7f9f5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-lldp-types.yang @@ -0,0 +1,296 @@ +module openconfig-lldp-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/lldp/types"; + + prefix "oc-lldp-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types related to the LLDP protocol model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2016-05-16" { + description + "Initial public revision"; + reference "0.1.0"; + } + + + // identity statements + + identity LLDP_SYSTEM_CAPABILITY { + description + "Base identity for standard LLDP system capabilities. + The system capabilities field contains a bit-map of the + capabilities that define the primary function(s) of + the system. A system may advertise more than one capability."; + reference + "Table 8-4 System Capabilities, IEEE 802.1AB-2009"; + } + + identity OTHER { + base LLDP_SYSTEM_CAPABILITY; + description + "Other capability not specified; bit position 1"; + } + + identity REPEATER { + base LLDP_SYSTEM_CAPABILITY; + description + "Repeater capability; bit position 2"; + reference + "IETF RFC 2108"; + } + + identity MAC_BRIDGE { + base LLDP_SYSTEM_CAPABILITY; + description + "MAC bridge capability; bit position 3"; + reference + "IEEE Std 802.1D"; + } + + identity WLAN_ACCESS_POINT { + base LLDP_SYSTEM_CAPABILITY; + description + "WLAN access point capability; bit position 4"; + reference + "IEEE Std 802.11 MIB"; + } + + identity ROUTER { + base LLDP_SYSTEM_CAPABILITY; + description + "Router; bit position 5"; + reference + "IETF RFC 1812"; + } + + identity TELEPHONE { + base LLDP_SYSTEM_CAPABILITY; + description + "Telephone capability; bit position 6"; + reference + "IETF RFC 4293"; + } + + identity DOCSIS_CABLE_DEVICE { + base LLDP_SYSTEM_CAPABILITY; + description + "DOCSIS cable device; bit position 7"; + reference + "IETF RFC 4639 and IETF RFC 4546"; + } + + identity STATION_ONLY { + base LLDP_SYSTEM_CAPABILITY; + description + "Station only capability, for devices that implement only an + end station capability, and for which none of the other + capabilities apply; bit position 8"; + reference + "IETF RFC 4293"; + } + + identity C_VLAN { + base LLDP_SYSTEM_CAPABILITY; + description + "C-VLAN component of a VLAN Bridge; bit position 9"; + reference + "IEEE Std 802.1Q"; + } + + identity S_VLAN { + base LLDP_SYSTEM_CAPABILITY; + description + "S-VLAN component of a VLAN Bridge; bit position 10"; + reference + "IEEE Std 802.1Q"; + } + + identity TWO_PORT_MAC_RELAY { + base LLDP_SYSTEM_CAPABILITY; + description + "Two-port MAC Relay (TPMR) capability; bit position 11"; + reference + "IEEE Std 802.1Q"; + } + + identity LLDP_TLV { + description + "A base identity which describes the TLVs in LLDP"; + } + + identity CHASSIS_ID { + base LLDP_TLV; + description + "The chassis identifier of the device associated with + the transmitting LLDP agent"; + reference "IEEE Std 802.1AB"; + } + + identity PORT_ID { + base LLDP_TLV; + description + "The port identifier associated with the interface + on with the LLDP agent is transmitting"; + reference "IEEE Std 802.1AB"; + } + + identity PORT_DESCRIPTION { + base LLDP_TLV; + description + "The description of the port that is associated with + the interface on which the LLDP agent is transmitting"; + reference "IEEE Std 802.1AB"; + } + + identity SYSTEM_NAME { + base LLDP_TLV; + description + "The assigned name (sysName or hostname) of the device + which is transmitting the LLDP PDU"; + reference "IEEE Std 802.1AB"; + } + + identity SYSTEM_DESCRIPTION { + base LLDP_TLV; + description + "The description (sysDescr) of the device which is + transmitting the LLDP PDU"; + reference "IEEE Std 802.1AB"; + } + + identity SYSTEM_CAPABILITIES { + base LLDP_TLV; + description + "The primary functions of the device transmitting the + LLDP PDU and their administrative status"; + reference "IEEE Std 802.1AB"; + } + + identity MANAGEMENT_ADDRESS { + base LLDP_TLV; + description + "The address associated with the device transmitting the + LLDP PDU which can be used for higher-layer network + management"; + reference "IEEE Std 802.1AB"; + } + + // typedef statements + + typedef chassis-id-type { + type enumeration { + enum CHASSIS_COMPONENT { + description + "Chassis identifier based on the value of entPhysicalAlias + object defined in IETF RFC 2737"; + } + enum INTERFACE_ALIAS { + description + "Chassis identifier based on the value of ifAlias object + defined in IETF RFC 2863"; + } + enum PORT_COMPONENT { + description + "Chassis identifier based on the value of entPhysicalAlias + object defined in IETF RFC 2737 for a port or backplane + component"; + } + enum MAC_ADDRESS { + description + "Chassis identifier based on the value of a unicast source + address (encoded in network byte order and IEEE 802.3 + canonical bit order), of a port on the containing chassis + as defined in IEEE Std 802-2001"; + } + enum NETWORK_ADDRESS { + description + "Chassis identifier based on a network address, + associated with a particular chassis. The encoded address + is composed of two fields. The first field is a single + octet, representing the IANA AddressFamilyNumbers value + for the specific address type, and the second field is the + network address value"; + } + enum INTERFACE_NAME { + description + "Chassis identifier based on the name of the interface, + e.g., the value of ifName object defined in IETF RFC 2863"; + } + enum LOCAL { + description + "Chassis identifier based on a locally defined value"; + } + } + description + "Type definition with enumerations describing the source of + the chassis identifier"; + reference + "IEEE 802.1AB LLDP MIB"; + } + + typedef port-id-type { + type enumeration { + enum INTERFACE_ALIAS { + description + "Chassis identifier based on the value of ifAlias object + defined in IETF RFC 2863"; + } + enum PORT_COMPONENT { + description + "Port identifier based on the value of entPhysicalAlias + object defined in IETF RFC 2737 for a port component"; + } + enum MAC_ADDRESS { + description + "Port identifier based on the value of a unicast source + address (encoded in network byte order and IEEE 802.3 + canonical bit order) associated with a port"; + } + enum NETWORK_ADDRESS { + description + "Port identifier based on a network address, + associated with a particular port"; + } + enum INTERFACE_NAME { + description + "Port identifier based on the name of the interface, + e.g., the value of ifName object defined in IETF RFC 2863"; + } + enum AGENT_CIRCUIT_ID { + description + "Port identifer based on the circuit id in the DHCP + relay agent information option as defined in IETF + RFC 3046"; + } + enum LOCAL { + description + "Port identifier based on a locally defined alphanumeric + string"; + } + } + description + "Type definition with enumerations describing the basis of + the port identifier"; + reference + "IEEE 802.1AB LLDP MIB"; + } + + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-lldp.yang b/src/plugins/yang/openconfig/openconfig-lldp.yang new file mode 100644 index 0000000..c5381ef --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-lldp.yang @@ -0,0 +1,650 @@ +module openconfig-lldp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/lldp"; + + prefix "oc-lldp"; + + import openconfig-lldp-types { prefix oc-lldp-types; } + import openconfig-interfaces { prefix oc-if; } + import ietf-yang-types { prefix yang; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + for the LLDP protocol."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2018-07-17" { + description + "Adds ttl to lldp-neighbor-state"; + reference "0.2.0"; + } + + revision "2016-05-16" { + description + "Initial public revision"; + reference "0.1.0"; + } + + + // identity statements + + + // grouping statements + + grouping lldp-common-counters { + description + "Definition of global and per-interface counters"; + + leaf frame-in { + type yang:counter64; + description + "The number of lldp frames received."; + } + + leaf frame-out { + type yang:counter64; + description + "The number of frames transmitted out."; + } + + leaf frame-error-in { + type yang:counter64; + description + "The number of LLDP frames received with errors."; + } + + leaf frame-discard { + type yang:counter64; + description + "The number of LLDP frames received and discarded."; + } + + leaf tlv-discard { + type yang:counter64; + description + "The number of TLV frames received and discarded."; + } + + leaf tlv-unknown { + type yang:counter64; + description + "The number of frames received with unknown TLV."; + } + + leaf last-clear { + type yang:date-and-time; + description + "Indicates the last time the counters were + cleared."; + } + } + + grouping lldp-global-counters { + description + "Definition of global LLDP counters"; + + uses lldp-common-counters; + + leaf tlv-accepted { + type yang:counter64; + description + "The number of valid TLVs received."; + } + + leaf entries-aged-out { + type yang:counter64; + description + "The number of entries aged out due to timeout."; + } + + } + + grouping lldp-interface-counters { + description + "Definition of per-interface LLDP counters"; + + uses lldp-common-counters; + + leaf frame-error-out { + type yang:counter64; + description + "The number of frame transmit errors on the + interface."; + } + } + + grouping lldp-system-info-config { + description + "Configuration data for system-level local and remote + LLDP information"; + + leaf system-name { + type string { + length 0..255; + } + description + "The system name field shall contain an alpha-numeric string + that indicates the system's administratively assigned name. + The system name should be the system's fully qualified domain + name. If implementations support IETF RFC 3418, the sysName + object should be used for this field."; + } + + leaf system-description { + type string { + length 0..255; + } + description + "The system description field shall contain an alpha-numeric + string that is the textual description of the network entity. + The system description should include the full name and + version identification of the system's hardware type, + software operating system, and networking software. If + implementations support IETF RFC 3418, the sysDescr object + should be used for this field."; + } + + leaf chassis-id { + type string; + description + "The Chassis ID is a mandatory TLV which identifies the + chassis component of the endpoint identifier associated with + the transmitting LLDP agent"; + } + + leaf chassis-id-type { + type oc-lldp-types:chassis-id-type; + description + "This field identifies the format and source of the chassis + identifier string. It is an enumerator defined by the + LldpChassisIdSubtype object from IEEE 802.1AB MIB."; + } + } + + grouping lldp-system-info-state { + description + "Operational state data reported for the local and remote + systems"; + + } + + grouping lldp-neighbor-config { + description + "Configuration data for LLDP neighbors"; + + } + + grouping lldp-neighbor-state { + description + "Operational state data for LLDP neighbors"; + + leaf id { + type string; + description + "System generated identifier for the neighbor on the + interface."; + } + + leaf age { + type uint64; + units "seconds"; + description + "Age since discovery"; + } + + leaf last-update { + type int64; + description + "Seconds since last update received."; + } + + leaf ttl { + type uint16; + units "seconds"; + description + "The time-to-live (TTL) is a mandatory TLV which indicates + how long information from the neighbor should be considered + valid."; + } + + leaf port-id { + type string; + description + "The Port ID is a mandatory TLV which identifies the port + component of the endpoint identifier associated with the + transmitting LLDP agent. If the specified port is an IEEE + 802.3 Repeater port, then this TLV is optional."; + } + + leaf port-id-type { + type oc-lldp-types:port-id-type; + description + "This field identifies the format and source of the port + identifier string. It is an enumerator defined by the + PtopoPortIdType object from RFC2922."; + } + + leaf port-description { + type string; + description + "The binary string containing the actual port identifier for + the port which this LLDP PDU was transmitted. The source and + format of this field is defined by PtopoPortId from + RFC2922."; + } + + leaf management-address { + type string; + description + "The Management Address is a mandatory TLV which identifies a + network address associated with the local LLDP agent, which + can be used to reach the agent on the port identified in the + Port ID TLV."; + } + + leaf management-address-type { + type string; + description + "The enumerated value for the network address type + identified in this TLV. This enumeration is defined in the + 'Assigned Numbers' RFC [RFC3232] and the + ianaAddressFamilyNumbers object."; + } + } + + grouping lldp-capabilities-config { + description + "Configuration data for LLDP capabilities"; + } + + grouping lldp-capabilities-state { + description + "Operational state data for LLDP capabilities"; + + leaf name { + type identityref { + base oc-lldp-types:LLDP_SYSTEM_CAPABILITY; + } + description + "Name of the system capability advertised by the neighbor. + Capabilities are represented in a bitmap that defines the + primary functions of the system. The capabilities are + defined in IEEE 802.1AB."; + } + + leaf enabled { + type boolean; + description + "Indicates whether the corresponding system capability is + enabled on the neighbor."; + reference + "Sec 8.5.8.2 of IEEE 802.1AB-2009"; + } + } + + grouping lldp-capabilities-top { + description + "Top-level grouping for LLDP capabilities"; + + container capabilities { + config false; + description + "Enclosing container for list of LLDP capabilities"; + + list capability { + key "name"; + description + "List of LLDP system capabilities advertised by the + neighbor"; + + leaf name { + type leafref { + path "../state/name"; + } + description + "Reference to capabilities list key"; + } + + container config { + description + "Configuration data for LLDP capabilities"; + + uses lldp-capabilities-config; + } + + container state { + + config false; + + description + "Operational state data for LLDP capabilities"; + + uses lldp-capabilities-config; + uses lldp-capabilities-state; + } + } + } + } + + grouping lldp-custom-tlv-config { + description + "Configuration data for custom LLDP TLVs"; + } + + grouping lldp-custom-tlv-state { + description + "Operational state data for custom LLDP TLVs"; + + leaf type { + type int32; + description + "The integer value identifying the type of information + contained in the value field."; + } + + leaf oui { + type string; + description + "The organizationally unique identifier field shall contain + the organization's OUI as defined in Clause 9 of IEEE Std + 802. The high-order octet is 0 and the low-order 3 octets + are the SMI Network Management Private Enterprise Code of + the Vendor in network byte order, as defined in the + 'Assigned Numbers' RFC [RFC3232]."; + } + + leaf oui-subtype { + type string; + description + "The organizationally defined subtype field shall contain a + unique subtype value assigned by the defining organization."; + } + + // TODO: consider making this string type + leaf value { + type binary; + description + "A variable-length octet-string containing the + instance-specific information for this TLV."; + } + } + + grouping lldp-custom-tlv-top { + description + "Top-level grouping for custom LLDP TLVs"; + + container custom-tlvs { + config false; + description + "Enclosing container for list of custom TLVs from a + neighbor"; + + list tlv { + key "type oui oui-subtype"; + description + "List of custom LLDP TLVs from a neighbor"; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to type list key"; + } + + leaf oui { + type leafref { + path "../state/oui"; + } + description + "Reference to oui list key"; + } + + leaf oui-subtype { + type leafref { + path "../state/oui-subtype"; + } + description + "Reference to oui-subtype list key"; + } + + container config { + description + "Configuration data "; + + uses lldp-custom-tlv-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses lldp-custom-tlv-config; + uses lldp-custom-tlv-state; + } + } + } + } + + grouping lldp-neighbor-top { + description + "Top-level grouping for the LLDP neighbor list"; + + container neighbors { + config false; + description + "Enclosing container for list of LLDP neighbors on an + interface"; + + list neighbor { + key "id"; + description + "List of LLDP neighbors"; + + leaf id { + type leafref { + path "../state/id"; + } + description + " "; + } + + container config { + description + "Configuration data "; + + uses lldp-neighbor-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses lldp-system-info-config; + uses lldp-system-info-state; + uses lldp-neighbor-config; + uses lldp-neighbor-state; + } + + uses lldp-custom-tlv-top; + uses lldp-capabilities-top; + } + } + } + + grouping lldp-interface-config { + description + "Configuration data for LLDP on each interface"; + + leaf name { + type oc-if:base-interface-ref; + description + "Reference to the LLDP Ethernet interface"; + } + + leaf enabled { + type boolean; + default "true"; + description + "Enable or disable the LLDP protocol on the interface."; + } + } + + grouping lldp-interface-state { + description + "Operational state data for LLDP on each interface"; + + container counters { + description + "LLDP counters on each interface"; + + uses lldp-interface-counters; + } + } + + grouping lldp-interface-top { + description + "Top-level grouping "; + + container interfaces { + description + "Enclosing container "; + + list interface { + key "name"; + description + "List of interfaces on which LLDP is enabled / available"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for LLDP on each interface"; + + uses lldp-interface-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses lldp-interface-config; + uses lldp-interface-state; + } + + uses lldp-neighbor-top; + } + } + } + + + grouping lldp-config { + description + "Configuration data for global LLDP parameters"; + + leaf enabled { + type boolean; + default "true"; + description + "System level state of the LLDP protocol."; + } + + leaf hello-timer { + type uint64; + units "seconds"; + description + "System level hello timer for the LLDP protocol."; + } + + leaf-list suppress-tlv-advertisement { + type identityref { + base oc-lldp-types:LLDP_TLV; + } + description + "Indicates whether the local system should suppress the + advertisement of particular TLVs with the LLDP PDUs that it + transmits. Where a TLV type is specified within this list, it + should not be included in any LLDP PDU transmitted by the + local agent."; + } + } + + grouping lldp-state { + description + "Operational state data for global LLDP parameters"; + + container counters { + description + "Global LLDP counters"; + + uses lldp-global-counters; + } + } + + grouping lldp-top { + description + "Top-level grouping for LLDP model"; + + container lldp { + description + "Top-level container for LLDP configuration and state data"; + + container config { + description + "Configuration data "; + + uses lldp-config; + uses lldp-system-info-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses lldp-config; + uses lldp-system-info-config; + uses lldp-system-info-state; + uses lldp-state; + } + + uses lldp-interface-top; + } + } + + // data definition statements + + uses lldp-top; + + +} diff --git a/src/plugins/yang/openconfig/openconfig-local-routing.yang b/src/plugins/yang/openconfig/openconfig-local-routing.yang new file mode 100644 index 0000000..5184fe7 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-local-routing.yang @@ -0,0 +1,408 @@ +module openconfig-local-routing { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/local-routing"; + + prefix "oc-loc-rt"; + + // import some basic types + import openconfig-inet-types { prefix inet; } + import openconfig-policy-types { prefix oc-pt; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-interfaces { prefix oc-if; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module describes configuration and operational state data + for routes that are locally generated, i.e., not created by + dynamic routing protocols. These include static routes, locally + created aggregate routes for reducing the number of constituent + routes that must be advertised, summary routes for IGPs, etc. + + This model expresses locally generated routes as generically as + possible, avoiding configuration of protocol-specific attributes + at the time of route creation. This is primarily to avoid + assumptions about how underlying router implementations handle + route attributes in various routing table data structures they + maintain. Hence, the definition of locally generated routes + essentially creates 'bare' routes that do not have any protocol- + specific attributes. + + When protocol-specific attributes must be attached to a route + (e.g., communities on a locally defined route meant to be + advertised via BGP), the attributes should be attached via a + protocol-specific policy after importing the route into the + protocol for distribution (again via routing policy)."; + + oc-ext:openconfig-version "1.0.1"; + + revision "2017-05-15" { + description + "Update to resolve style guide non-compliance."; + reference "1.0.1"; + } + + revision "2016-05-11" { + description + "OpenConfig public release"; + reference "1.0.0"; + } + + + // identity statements + + identity LOCAL_DEFINED_NEXT_HOP { + description + "A base identity type of local defined next-hops"; + } + + identity DROP { + base LOCAL_DEFINED_NEXT_HOP; + description + "Discard traffic for the corresponding destination"; + } + + identity LOCAL_LINK { + base LOCAL_DEFINED_NEXT_HOP; + description + "Treat traffic towards addresses within the specified + next-hop prefix as though they are connected to a local + link. When the LOCAL_LINK next-hop type is specified, + an interface must also be specified such that + the local system can determine which link to trigger + link-layer address discovery against"; + } + + // typedef statements + + typedef local-defined-next-hop { + type identityref { + base LOCAL_DEFINED_NEXT_HOP; + } + description + "Pre-defined next-hop designation for locally generated + routes"; + } + + // grouping statements + + grouping local-generic-settings { + description + "Generic options that can be set on local routes When + they are defined"; + + leaf set-tag { + type oc-pt:tag-type; + description + "Set a generic tag value on the route. This tag can be + used for filtering routes that are distributed to other + routing protocols."; + } + } + + grouping local-static-config { + description + "Configuration data for static routes."; + + leaf prefix { + type inet:ip-prefix; + description + "Destination prefix for the static route, either IPv4 or + IPv6."; + } + + uses local-generic-settings; + } + + grouping local-static-state { + description + "Operational state data for static routes"; + } + + + grouping local-static-nexthop-config { + description + "Configuration parameters related to each next-hop entry + specified for a static route"; + + leaf index { + type string; + description + "An user-specified identifier utilised to uniquely reference + the next-hop entry in the next-hop list. The value of this + index has no semantic meaning other than for referencing + the entry."; + } + + leaf next-hop { + type union { + type inet:ip-address; + type local-defined-next-hop; + } + description + "The next-hop that is to be used for the static route + - this may be specified as an IP address, an interface + or a pre-defined next-hop type - for instance, DROP or + LOCAL_LINK. When this leaf is not set, and the interface-ref + value is specified for the next-hop, then the system should + treat the prefix as though it is directly connected to the + interface."; + } + + leaf metric { + type uint32; + description + "A metric which is utilised to specify the preference of + the next-hop entry when it is injected into the RIB. The + lower the metric, the more preferable the prefix is. When + this value is not specified the metric is inherited from + the default metric utilised for static routes within the + network instance that the static routes are being + instantiated. When multiple next-hops are specified for a + static route, the metric is utilised to determine which of + the next-hops is to be installed in the RIB. When multiple + next-hops have the same metric (be it specified, or simply + the default) then these next-hops should all be installed + in the RIB"; + } + + leaf recurse { + type boolean; + default false; + description + "Determines whether the next-hop should be allowed to + be looked up recursively - i.e., via a RIB entry which has + been installed by a routing protocol, or another static route + - rather than needing to be connected directly to an + interface of the local system within the current network + instance. When the interface reference specified within the + next-hop entry is set (i.e., is not null) then forwarding is + restricted to being via the interface specified - and + recursion is hence disabled."; + } + } + + grouping local-static-nexthop-state { + description + "Operational state parameters relating to a next-hop entry + for a static route"; + } + + + grouping local-static-top { + description + "Top-level grouping for the list of static route definitions"; + + container static-routes { + description + "Enclosing container for the list of static routes"; + + list static { + key "prefix"; + description + "List of locally configured static routes"; + + leaf prefix { + type leafref { + path "../config/prefix"; + } + description + "Reference to the destination prefix list key."; + } + + container config { + description + "Configuration data for static routes"; + + uses local-static-config; + } + + container state { + + config false; + + description + "Operational state data for static routes"; + + uses local-static-config; + uses local-static-state; + } + + container next-hops { + description + "Configuration and state parameters relating to the + next-hops that are to be utilised for the static + route being specified"; + + list next-hop { + key "index"; + + description + "A list of next-hops to be utilised for the static + route being specified."; + + leaf index { + type leafref { + path "../config/index"; + } + description + "A reference to the index of the current next-hop. + The index is intended to be a user-specified value + which can be used to reference the next-hop in + question, without any other semantics being + assigned to it."; + } + + container config { + description + "Configuration parameters relating to the next-hop + entry"; + + uses local-static-nexthop-config; + } + + container state { + config false; + description + "Operational state parameters relating to the + next-hop entry"; + + uses local-static-nexthop-config; + uses local-static-nexthop-state; + } + + uses oc-if:interface-ref; + } + } + } + } + } + + grouping local-aggregate-config { + description + "Configuration data for aggregate routes"; + + leaf prefix { + type inet:ip-prefix; + description + "Aggregate prefix to be advertised"; + } + + leaf discard { + type boolean; + default false; + description + "When true, install the aggregate route with a discard + next-hop -- traffic destined to the aggregate will be + discarded with no ICMP message generated. When false, + traffic destined to an aggregate address when no + constituent routes are present will generate an ICMP + unreachable message."; + } + + uses local-generic-settings; + + } + + grouping local-aggregate-state { + description + "Operational state data for local aggregate advertisement + definitions"; + } + + grouping local-aggregate-top { + description + "Top-level grouping for local aggregates"; + + container local-aggregates { + description + "Enclosing container for locally-defined aggregate + routes"; + + list aggregate { + key "prefix"; + description + "List of aggregates"; + + leaf prefix { + type leafref { + path "../config/prefix"; + } + description + "Reference to the configured prefix for this aggregate"; + } + + container config { + description + "Configuration data for aggregate advertisements"; + + uses local-aggregate-config; + } + + container state { + + config false; + + description + "Operational state data for aggregate + advertisements"; + + uses local-aggregate-config; + uses local-aggregate-state; + } + } + } + } + + grouping local-routes-config { + description + "Configuration data for locally defined routes"; + } + + grouping local-routes-state { + description + "Operational state data for locally defined routes"; + } + + grouping local-routes-top { + description + "Top-level grouping for local routes"; + + container local-routes { + description + "Top-level container for local routes"; + + container config { + description + "Configuration data for locally defined routes"; + + uses local-routes-config; + } + + container state { + + config false; + + description + "Operational state data for locally defined routes"; + + uses local-routes-config; + uses local-routes-state; + } + + uses local-static-top; + uses local-aggregate-top; + } + } + + uses local-routes-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-module-catalog.yang b/src/plugins/yang/openconfig/openconfig-module-catalog.yang new file mode 100644 index 0000000..673fe95 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-module-catalog.yang @@ -0,0 +1,786 @@ +module openconfig-module-catalog { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/module-catalog"; + + prefix "oc-cat"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-catalog-types { prefix oc-cat-types; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module provides a schema for cataloging and descrbing + YANG models published across various organizations. The catalog + contains several categories of data: + + * organizations -- entities that publish and/or maintain + individual YANG modules or groups of modules + + * modules -- information regarding individual YANG modules, + including their versions, dependencies, submodules, and how + to access them + + * release bundles -- groups of modules that are compatible and + consistent with each other (as determined by the publisher of + of the bundle). The release bundle does not necessarily + correspond to a functional area, e.g., it could the entire + set of modules published by an organization + + * feature bundles -- sets of schema paths across a + release bundle that provide a specific set of functionality + + * implementations -- information about available module and/or + bundle implementations and their status"; + + oc-ext:openconfig-version "0.2.1"; + + revision "2017-05-01" { + description + "Fix to module dependency list"; + reference "0.2.1"; + } + + revision "2017-03-08" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + revision "2016-02-15" { + description + "Initial OpenConfig public release"; + reference "0.1.0"; + } + + + + // grouping statements + + grouping catalog-module-common-config { + description + "Data definitions common for both bundles and standalone + modules"; + + leaf name { + type string; + description + "The name of the module or bundle. For modules, this + should reflect the 'module' or 'submodule' + statement in the YANG module file. + + For bundles, this is the canonical name for the overall + bundle of modules which is to be released together. + This name should be consistent over multiple + releases"; + } + + leaf version { + type oc-cat-types:module-version-type; + description + "For individual modules, this is the version number, e.g., + a semantic version. The version may be the same as the date + indicated in the module revision statement. + + For bundles, this is a semantic version number for the + overall bundle. This version is to be defined as per the + approach specified in the OpenConfig semantic version + guidance - and is of the form x.y.z, where x is the major + version, y is the minor version, and z is the patch level"; + reference + "Semantic versioning for OpenConfig models"; + } + } + + grouping feature-bundle-included-reference { + description + "References to the included feature bundles"; + + leaf name { + type leafref { + path "../../../../../../../organizations/" + + "organization[name=current()/../publisher]/" + + "feature-bundles/feature-bundle/name"; + } + description + "Name of the referenced feature bundle"; + } + + leaf publisher { + type leafref { + path "../../../../../../../organizations/organization/" + + "name"; + } + description + "Publisher of the referenced feature bundle"; + } + + leaf version { + type oc-cat-types:module-version-type; + description + "Version of the referenced feature bundle"; + } + } + + grouping catalog-implementation-bundle-config { + description + "References to the feature bundles supported by an + implementation"; + + uses feature-bundle-included-reference; + } + + grouping catalog-implementation-bundle-top { + description + "Top-level grouping for the list of feature bundles + supported by an implementation"; + + container feature-bundles { + description + "Enclosing container for the list of feature bundles"; + + list feature-bundle { + key "name version"; + description + "List of feature bundles supported by the implementation"; + + uses catalog-implementation-bundle-config; + } + } + } + + grouping catalog-implementation-config { + description + "Data describing any available implementations"; + + leaf id { + type string; + description + "An identifier for the implementation, provided by the + implementor. This id should uniquely identify a specific + implementation of the module, e.g., based on the vendor, + platform, and platform version."; + } + + leaf description { + type string; + description + "A text summary of important information about the + implementation"; + } + + leaf reference { + type union { + type oc-inet:uri; + type string; + } + description + "A URI (preferred) or text reference to more detailed + information about the implementation."; + } + + + leaf platform { + type string; + description + "Name of the platform on which the implementation + is available -- this could be the model name of a network + device, a server OS, etc."; + } + + leaf platform-version { + type string; + description + "Implementor-defined version name or number of the + module implementation, corresponding to the platform. + This could be the firmware version of a network device + such as a router, OS version, or other server platform + version."; + } + + leaf status { + type identityref { + base oc-cat-types:IMPLEMENTATION_STATUS_TYPE; + } + description + "Indicates the status of the implementation, e.g., + complete, partial, in-progress, etc. Implementors + may define additional values for the base identity"; + } + } + + grouping catalog-implementation-top { + description + "Top level grouping for information on model implementations"; + + container implementations { + description + "Container for module implementation information"; + + list implementation { + key "id"; + description + "List of available implementations, keyed by an identifier + provided by either the implementor or the module + maintainer. Such a key avoids needing a complex composite + key to uniquely identify an implementation."; + + uses catalog-implementation-config; + uses catalog-implementation-bundle-top; + } + } + } + + grouping catalog-module-dependency-config { + description + "Information about module dependencies"; + + + leaf-list required-module { + type string; + description + "List of names of modules that are imported by the + current module. This list should reflect all of the 'import' + statements in the module. Release bundles should be used to + indicate which versions of the imported module are used + (or are compatible) with the current module"; + } + } + + grouping catalog-module-dependency-top { + description + "Top-level grouping for module dependency data"; + + container dependencies { + description + "Data about dependencies of the module"; + + uses catalog-module-dependency-config; + } + + } + + grouping catalog-module-classification-config { + description + "Data describing the module's classification(s)"; + + leaf category { + type identityref { + base oc-cat-types:MODULE_CATEGORY_BASE; + } + description + "Categorization of the module based on identities defined + or used by the publishing organizations."; + } + + leaf subcategory { + type identityref { + base oc-cat-types:MODULE_SUBCATEGORY_BASE; + } + description + "Sub-categorization of the module based on identities + defined or used by the publishing organizations."; + } + + leaf deployment-status { + type identityref { + base oc-cat-types:MODULE_STATUS_TYPE; + } + description + "Deployment status of the module -- experimental, + standards-track, production, etc."; + } + } + + grouping catalog-module-classification-top { + description + "Data definitions related to module classfications"; + + container classification { + description + "Container for data describing the module's classification"; + + uses catalog-module-classification-config; + } + } + + grouping catalog-module-access-config { + description + "Data pertaining to retrieval and usage of the module"; + + leaf uri { + type oc-inet:uri; + description + "URI where module can be downloaded. Modules may be + made available from the catalog maintainer, or directly + from the publisher"; + } + + leaf md5-hash { + type string; + description + "Optional MD5 hash of the module file. If specified, the + hash may be used by users to validate data integrity"; + } + } + + grouping catalog-module-access-top { + description + "Top level groupig for data related to accessing a module + or submodule"; + + container access { + description + "Container for data pertaining to retrieval and usage of the + module"; + + uses catalog-module-access-config; + } + } + + grouping catalog-module-submodule-config { + description + "Data definitions for submodules belonging to a + module"; + + leaf name { + type string; + description + "Name of the submodule as indicated by its top-level + 'submodule' statement"; + } + + } + + grouping catalog-module-submodule-top { + description + "Top-level grouping for submodule information"; + + container submodules { + description + "Data for the submodules belonging to a submodule. If the + module does not have any submodules, this container + should be empty."; + + list submodule { + key "name"; + description + "List of submodules included by a module. All submodules + specified by 'include' statements in the module should be + included in this list."; + + uses catalog-module-submodule-config; + uses catalog-module-access-top; + } + } + } + + grouping catalog-module-base-config { + description + "Basic information describing the module, e.g., the + YANG metadata in the module preface."; + + + leaf namespace { + type string; + description + "Published namespace of module, i.e., defined by the + 'namespace' "; + } + + leaf prefix { + type string; + description + "Published prefix of the module"; + } + + leaf revision { + type string; + description + "Date in the revision statement of the module"; + } + + leaf summary { + type string; + description + "Summary description of the module"; + } + } + + grouping release-bundle-member-config { + description + "Data for each member of a bundle"; + + leaf id { + type string; + description + "Identifier for the bundle member"; + } + + leaf type { + type identityref { + base oc-cat-types:CATALOG_MEMBER_TYPE; + } + description + "The type of member that is to be included within the + release bundle. Release bundles may include modules and + other release bundles. Both member modules and member + bundles should specify the list of compatible versions."; + } + + leaf module { + when "../type = 'oc-cat-types:MODULE'" { + description + "The module name is specified for bundle membrs that are + modules"; + } + type leafref { + path "../../../../../../../organizations/" + + "organization[name=current()/../publisher]/modules/" + + "module/name"; + } + description + "Name of the module set which is included in this bundle - + for example, 'openconfig-bgp'"; + } + + leaf release-bundle { + when "../type = 'oc-cat-types:RELEASE_BUNDLE'" { + description + "The release bundle is specified for bundle members that + are release bundles"; + } + type leafref { + path "../../../../../../../organizations/" + + "organization[name=current()/../publisher]/" + + "release-bundles/release-bundle/name"; + } + description + "Name of the module set which is included in this bundle - + for example, 'openconfig-bgp'"; + } + + leaf publisher { + type leafref { + path "../../../../../../../organizations/organization/" + + "name"; + } + description + "Reference to the name of the publishing organization"; + } + + leaf-list compatible-versions { + type oc-cat-types:module-version-type; + description + "A list of semantic version specification of the versions + of the specified module or release bundle which are + compatible when building this version of the bundle. + + Version specifications may be added when changes are made + to a module within a bundle, and this does not affect the + interaction between it and other modules. It is expected + that backwards compatible changes to an individual module or + member bundle do not affect the compatibility of that + with other members, and hence wildcard matches are allowed + within this list."; + } + } + + grouping release-bundle-member-top { + + description + "Parameters relating to models within release bundles"; + + container members { + description + "List of bundle members which make up this release bundle. A + member is defined as an individual YANG module specified + in the YANG catalogue, or another release + bundle which can be used to group multiple YANG + models together."; + + list member { + key "id"; + description + "A set of modules or bundles which are part of the bundle + of models. For example, if 'ietf-yang-types' were to be + specified within the bundle, then this would refer to the + individual entry within the module catalogue. If the type + of the entry is set to bundle, then for example, + openconfig-bgp could be referenced - which itself consists + of separate modules."; + + uses release-bundle-member-config; + + } + } + } + + grouping release-bundle-top { + description + "Top-level container for a release bundle"; + + container release-bundles { + description + "List of release bundles"; + + list release-bundle { + key "name version"; + + description + "List of release bundles - sets of modules and/or + bundles which are interoperable"; + + uses catalog-module-common-config; + uses release-bundle-member-top; + } + } + } + + grouping feature-bundle-release-config { + description + "Data definitions to identify the release bundle that the + feature bundle is based on."; + + leaf name { + type leafref { + path "../../../../release-bundles/release-bundle/name"; + } + description + "Reference to the name of the release bundle used for the + feature paths."; + } + + leaf version { + type leafref { + path "../../../../release-bundles/" + + "release-bundle[name=current()/../name]/version"; + } + description + "Reference to the release bundle version used for the + feature paths"; + } + + leaf publisher { + type leafref { + path "../../../../release-bundles/" + + "release-bundle[name=current()/../name]/publisher"; + } + description + "Reference to the publisher of the release bundle used for + the feature paths"; + } + } + + grouping feature-bundle-release-top { + description + "Top-level grouping for data about the release bundle used + to specify the feature bundle"; + + container release-bundle { + description + "Data to identify the release bundle from which the feature + paths should be specified. If the feature crosses + release bundles, a new release bundle should be + created to support the feature bundle."; + + leaf name { + type leafref { + path "../../../../../../organizations/" + + "organization[name=current()/../publisher]/" + + "release-bundles/release-bundle/name"; + } + description + "Name of the module set which is included in this bundle - + for example, 'openconfig-bgp'"; + } + + leaf publisher { + type leafref { + path "../../../../../../organizations/organization/" + + "name"; + } + description + "Reference to the name of the publishing organization"; + } + + leaf version { + type oc-cat-types:module-version-type; + description + "Version of the referenced release bundle"; + } + } + } + + + grouping feature-bundle-config { + description + "Data definitions for the feature bundle"; + + uses catalog-module-common-config; + + leaf-list path { + type string; + description + "The list of schema paths included in the feature. The + paths specify subtrees, i.e., all data underneath the + specified path are included in the feature."; + } + } + + grouping feature-bundle-feature-config { + description + "Data definitions for included feature bundles"; + + uses feature-bundle-included-reference; + } + + grouping feature-bundle-feature-top { + description + "Top level grouping for the list of included feature + bundles"; + + container feature-bundles { + description + "Enclosing container for the list of included feature + bundles. Feature bundles may be composed from other + smaller feature units"; + + list feature-bundle { + key "name"; + description + "The list of feature bundles included in the current + feature bundle."; + + uses feature-bundle-feature-config; + } + } + + } + + + grouping feature-bundle-top { + description + "Top-level grouping for OpenConfig feature bundles"; + + container feature-bundles { + description + "Enclosing container for the list of feature bundles"; + + list feature-bundle { + key "name version"; + description + "List of feature bundles"; + + uses feature-bundle-config; + uses feature-bundle-release-top; + uses feature-bundle-feature-top; + } + } + } + + grouping catalog-module-top { + description + "Top level structure of the module catalog"; + + container modules { + description + "Modules published by this organization"; + + list module { + key "name version"; + description + "List of published modules from the organization"; + + uses catalog-module-common-config; + uses catalog-module-base-config; + uses catalog-module-classification-top; + uses catalog-module-dependency-top; + uses catalog-module-access-top; + uses catalog-module-submodule-top; + } + } + } + + grouping catalog-organization-config { + description + "Top level grouping for data related to an organization that + publishes module, bundles, etc."; + + leaf name { + type string; + description + "Name of the maintaining organization -- the name should be + supplied in the official format used by the organization. + Standards Body examples: + IETF, IEEE, MEF, ONF, etc. + Commercial entity examples: + AT&T, Facebook, + Name of industry forum examples: + OpenConfig, OpenDaylight, ON.Lab"; + } + + leaf type { + type identityref { + base oc-cat-types:ORGANIZATION_TYPE; + } + description + "Type of the publishing organization"; + } + + leaf contact { + type string; + description + "Contact information for the publishing organization (web + site, email address, etc.)"; + } + } + + grouping catalog-organization-top { + description + "Top level grouping for list of maintaining organizations"; + + container organizations { + description + "List of organizations owning modules"; + + list organization { + key "name"; + + description + "List of organizations publishing YANG modules or + module bundles"; + + uses catalog-organization-config; + uses catalog-module-top; + uses release-bundle-top; + uses feature-bundle-top; + uses catalog-implementation-top; + } + } + } + + + grouping catalog-top { + description + "Top-level grouping for the YANG model catalog"; + + uses catalog-organization-top; + } + + // data definition statements + + uses catalog-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-igp.yang b/src/plugins/yang/openconfig/openconfig-mpls-igp.yang new file mode 100644 index 0000000..267515c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-igp.yang @@ -0,0 +1,129 @@ +submodule openconfig-mpls-igp { + + yang-version "1"; + + belongs-to "openconfig-mpls" { + prefix "oc-mpls"; + } + + + // import some basic types + import openconfig-mpls-ldp { prefix oc-ldp; } + import openconfig-extensions { prefix oc-ext; } + + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Configuration generic configuration parameters for IGP-congruent + LSPs"; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + // grouping statements + + + grouping igp-lsp-common { + description + "common definitions for IGP-congruent LSPs"; + + } + + + grouping igp-lsp-setup { + description + "signaling protocol definitions for IGP-based LSPs"; + + container path-setup-protocol { + description + "select and configure the signaling method for + the LSP"; + + // uses path-setup-common; + uses oc-ldp:igp-lsp-ldp-setup; + } + } + + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-ldp.yang b/src/plugins/yang/openconfig/openconfig-mpls-ldp.yang new file mode 100644 index 0000000..ade7876 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-ldp.yang @@ -0,0 +1,873 @@ +module openconfig-mpls-ldp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/ldp"; + + prefix "oc-ldp"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-types { prefix oc-types; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Configuration of Label Distribution Protocol global and LSP- + specific parameters for IGP-congruent LSPs. + + This model reuses data items defined in the IETF YANG model for + LDP described by draft-ietf-mpls-ldp-yang-04, YANG Data Model for + MPLS LDP, following an alternate structure. + + Portions of this code were derived from draft-ietf-mpls-ldp-yang-04. + Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + // typedef statements + + typedef mpls-ldp-adjacency-type { + type enumeration { + enum LINK { + description + "Link LDP adjacency"; + } + enum TARGETED { + description + "Targeted LDP adjacency"; + } + } + description + "enumerated type for specifying LDP adjacencies"; + } + + typedef mpls-ldp-afi { + type enumeration { + enum IPV4 { + description + "IPv4 AFI for LDP adjancencies"; + } + enum IPV6 { + description + "IPv6 AFI for LDP adjancencies"; + } + } + description + "enumerated type for specifying LDP AFIs"; + } + + // grouping statements + + grouping ldp-global { + description + "Global LDP signaling configuration"; + + container ldp { + description + "LDP global signaling configuration"; + + container global { + description + "Platform wide LDP configuration and state"; + + uses mpls-ldp-global; + uses mpls-ldp-graceful-restart; + uses mpls-ldp-authentication-top; + } + + uses mpls-ldp-interface-attributes-top; + uses mpls-ldp-targeted-top; + uses mpls-ldp-neighbors-top; + + } + } + + grouping mpls-ldp-authentication-top { + description + "Grouping containing LDP authentication attributes"; + + container authentication { + description + "Global LDP authentication"; + + container config { + description + "Configuration of LDP authentication attributes"; + uses mpls-ldp-authentication-config; + } + + container state { + config false; + description + "LDP authentication state."; + uses mpls-ldp-authentication-config; + } + } + } + + grouping mpls-ldp-neighbors-top { + description + "Global LDP neighbor attributes"; + + container neighbors { + description + "State and configuration LDP neighbors attributes"; + + list neighbor { + key "lsr-id label-space-id"; + + description + "List of LDP neighbors and their attributes."; + + leaf lsr-id { + type leafref { + path "../config/lsr-id"; + } + description + "Neighbor label switch router identifier."; + } + + leaf label-space-id { + type leafref { + path "../config/label-space-id"; + } + description + "Label space ID of the neighbor."; + } + + container config { + description + "Neighbor configuration attributes."; + uses mpls-ldp-neighbor-config; + } + + container state { + config false; + description + "Neighbor state attributes."; + uses mpls-ldp-neighbor-config; + } + + container hello-adjacencies { + config false; + description "Top container for hello adjacencies + for a given LDP neighbor."; + + list hello-adjacency { + key "remote-address local-address"; + config false; + description + "List of hello adjacencies for a given LDP + neighbor."; + + leaf remote-address { + config false; + description + "Within the LDP adjacency, this attribute + shows the neighbor address."; + type leafref { + path "../state/remote-address"; + } + } + + leaf local-address { + config false; + description + "Within the LDP adjacency, this attribute + shows the local address."; + type leafref { + path "../state/local-address"; + } + } + + container state { + description + "State information for a particular LDP + hello adjacency."; + uses mpls-ldp-adjacency-state; + } + + uses oc-if:interface-ref-state; + + container hello-holdtime { + + description + "Specifies the time the sending LSR will + maintain its record of Hellos from the + receiving LSR"; + + container state { + description + "State attributes related to the + hello-holdtime."; + config false; + uses mpls-ldp-hello-holdtime-state; + } + } + + } + } + + uses mpls-ldp-authentication-top; + + } + } + } + + grouping mpls-ldp-neighbor-config { + description + "Global configuration for LDP neighbors."; + + leaf lsr-id { + type oc-inet:ip-address; + description + "Neighbor label switch router identifier."; + } + + leaf label-space-id { + type uint16; + description + "Label space ID of the neighbor."; + } + + } + + grouping mpls-ldp-adjacency-state { + + description + "Set of LDP neighbor related state attributes."; + + leaf remote-address { + description + "Within the LDP adjacency, this attribute + shows the neighbor address."; + type oc-inet:ip-address; + } + + leaf local-address { + description + "Within the LDP adjacency, this attribute + shows the local address."; + type oc-inet:ip-address; + } + + leaf adjacency-type { + description + "This attributes defines if the LDP + adjacency is from a direct link or from + targeted discovery."; + type oc-ldp:mpls-ldp-adjacency-type; + } + + leaf last-clear { + type oc-types:timeticks64; + description + "Timestamp of the last time the interface counters + were cleared. The value is the timestamp in + nanoseconds relative to the Unix Epoch (Jan 1, + 1970 00:00:00 UTC)."; + } + + leaf hello-received { + type oc-yang:counter64; + description + "Number of Hello messaged received by the device"; + } + + leaf hello-dropped { + type oc-yang:counter64; + description + "Number of Hello messaged dropped by the device"; + } + + } + + grouping mpls-ldp-hello-holdtime-state { + description + "Grouping containing the state attributes + for hello holdtime."; + + leaf adjacent { + description + "Hello holdtime attribute learned from the + LDP neighbor"; + type uint16; + } + + leaf negotiated { + description + "Hello holdtime attribute negotiated between + the LDP neighbor and the local router."; + type uint16; + } + + leaf hello-expiration { + description + "Expiration time for the hello holdtime."; + type oc-types:timeticks64; + } + + leaf next-hello { + description + "Time when the next LDP hello will be sent to + the adjacent neighbor."; + type oc-types:timeticks64; + } + + } + + grouping mpls-ldp-global { + description + "Global LDP attributes"; + + container config { + description + "Global LDP configuration attributes."; + uses mpls-ldp-global-config; + } + + container state { + config false; + description + "Global LDP state information."; + uses mpls-ldp-global-config; + } + } + + grouping mpls-ldp-global-config { + description + "Grouping containing platform wide LDP information"; + + leaf lsr-id { + type oc-inet:ip-address; + description + "Global label switch router identifier + configuration."; + reference "RFC5036 LDP Specification"; + } + + } + + grouping mpls-ldp-interface-attributes-top { + description + "Top-level structure grouping for interface + attributes"; + + container interface-attributes { + description + "Container including attributes for LDP-enabled + interfaces"; + + container config { + description + "Configuration of per-interface LDP parameters"; + uses mpls-ldp-hello-timers-top-config; + } + + container state { + config false; + description + "Per-interface LDP protocol and state information"; + uses mpls-ldp-hello-timers-top-config; + } + + container interfaces { + description + "Container aggregating all interfaces and their + LDP-specific attributes."; + + list interface { + key "interface-id"; + description + "list of per-interface LDP configurations"; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "reference to the interface-id data"; + } + + container config { + description + "Configuration of per-interface LDP parameters"; + uses mpls-ldp-interfaces-config; + uses mpls-ldp-hello-timers-top-config; + } + + container state { + config false; + description + "Per-interface LDP protocol and state information"; + + uses mpls-ldp-interfaces-config; + uses mpls-ldp-hello-timers-top-config; + + container counters { + config false; + description + "Interface specific LDP statistics and counters"; + } + } + + uses oc-if:interface-ref; + uses mpls-ldp-address-families-ldp-top; + + } + } + } + } + + grouping mpls-ldp-address-families-ldp-top { + description + "Grouping containing the state and configuration + attributes for adress families."; + + container address-families { + description + "Top container comprising the adress families + attributes"; + list address-family { + key "afi-name"; + description + "List for attributes related to address-families for LDP."; + + leaf afi-name { + type leafref { + path "../config/afi-name"; + } + description + "Adress-family name atttibute (IPv4, IPv6)."; + } + + container config { + description + "Configuration attributes related to address-families + for LDP."; + uses mpls-ldp-address-family-config; + uses admin-config; + } + + container state { + description + "State attributes related to address-families for LDP."; + config false; + uses mpls-ldp-address-family-config; + uses admin-config; + } + } + } + } + + grouping mpls-ldp-hello-timers-top-config { + + description + "Grouping containing interface-related attributes + that can be configured for LDP."; + + leaf hello-holdtime { + type uint16; + description + "Defines the time for which a neighbor adjacency will + be kept by the router while it waits for a new link + Hello message."; + reference "RFC5036 LDP Specification"; + } + + leaf hello-interval { + type uint16; + description + "Defines the interval for sending Hello messages on + each link LDP adjacency."; + } + + } + + grouping mpls-ldp-targeted-top { + + description + "Grouping containing attributes for targeted LDP"; + + container targeted { + description + "Top container for targeted LDP state and configuration + attributes."; + + container config { + description + "Configuration attributes related to targeted LDP."; + uses mpls-ldp-targeted-attributes-top-config; + } + + container state { + config false; + description + "State attributes related to targeted LDP."; + uses mpls-ldp-targeted-attributes-top-config; + } + + uses mpls-ldp-address-targeted-ldp-top; + } + } + + grouping mpls-ldp-address-targeted-ldp-top { + description + "Grouping containing address attributes for targeted LDP."; + + container address-families { + description + "Global container for IPv4 and IPv6 attributes for LDP."; + + list address-family { + key "afi-name"; + description + "List of address families for targeted LDP + configuration"; + + leaf afi-name { + type leafref { + path "../config/afi-name"; + } + description + "Adress-family name atttibute (IPv4, IPv6)."; + } + + container config { + description + "Address-family configuration for targeted LDP"; + uses mpls-ldp-address-family-config; + } + + container state { + config false; + description + "Address-family state for targeted LDP"; + uses mpls-ldp-address-family-config; + } + + container targets { + description + "Container aggregating all targeted sessions and + their LDP-specific attributes."; + + list target { + key "remote-address"; + + description + "List of LDP targets configuration"; + + leaf remote-address { + type leafref { + path "../config/remote-address"; + } + description + "Neighbor address of the targeted LDP session"; + } + + container config { + + description + "Configuration parameters of a targeted LDP + adjacency"; + + leaf remote-address { + type oc-inet:ip-address; + description + "Configuration of neighbor address of the + targeted LDP adjacency"; + } + + leaf local-address { + type oc-inet:ip-address; + description + "Local IP address of the LDP adjacency"; + } + + uses admin-config; + uses mpls-ldp-hello-timers-top-config; + } + + container state { + config false; + description + "State attributes of a targeted LDP adjacency"; + + leaf remote-address { + config false; + type oc-inet:ip-address; + description + "Neighbor address of the targeted LDP adjacency"; + } + + leaf local-address { + config false; + type oc-inet:ip-address; + description + "Local IP address of the LDP adjacency"; + } + + uses admin-config; + uses mpls-ldp-hello-timers-top-config; + } + } + } + } + } + } + + grouping mpls-ldp-address-family-config { + description + "Grouping containing adress-family name atttibute"; + + leaf afi-name { + description + "Adress-family name atttibute (IPv4, IPv6)."; + type oc-ldp:mpls-ldp-afi; + } + + } + + grouping mpls-ldp-targeted-attributes-top-config { + + description + "Grouping containing targeted LDP configuration + attributes."; + + uses mpls-ldp-hello-timers-top-config; + + leaf hello-accept { + type boolean; + description + "Enables or disables the acceptance of targeted LDP + hello messages."; + reference "RFC5036 LDP Specification"; + } + + } + + grouping mpls-ldp-interfaces-config { + description + "LDP configuration information relevant to an interface"; + + leaf interface-id { + type oc-if:interface-id; + description + "Identifier for the interface"; + } + } + + grouping mpls-ldp-graceful-restart { + description + "Attributes relating to LDP Graceful-Restart"; + + container graceful-restart { + description + "Top container for LDP graceful-restart attributes"; + + container config { + description + "LDP graceful-restart configuration attributes."; + uses mpls-ldp-graceful-restart-config; + } + + container state { + config false; + description + "LDP graceful-restart state attributes."; + uses mpls-ldp-graceful-restart-config; + } + } + } + + grouping mpls-ldp-graceful-restart-config { + description + "Configuration parameters relating to LDP Graceful-Restart"; + + uses admin-config; + + leaf reconnect-time { + type uint16; + description + "Interval for which the remote LDP peers + will wait for the local node to reconnect after a + failure"; + reference "RFC3478 Graceful Restart Mechanism for Label + Distribution Protocol"; + } + + leaf recovery-time { + type uint16; + description + "Interval used to specify the time for the remote + peer to maintain the MPLS forwarding state after + the local node has succesfully reconnected"; + reference "RFC3478 Graceful Restart Mechanism for Label + Distribution Protocol"; + } + + leaf forwarding-holdtime { + type uint16; + description + "Time that defines the interval for keeping the + node in recovery mode."; + reference "RFC3478 Graceful Restart Mechanism for Label + Distribution Protocol"; + } + + leaf helper-enable { + type boolean; + description + "Enables the graceful restart helper for LDP."; + } + } + + grouping igp-tunnel-ldp { + description + "common defintiions for LDP-signaled LSP tunnel + types"; + } + + grouping igp-lsp-ldp-setup { + description + "grouping for LDP setup attributes"; + + container ldp { + description + "LDP signaling setup for IGP-congruent LSPs"; + uses igp-tunnel-ldp; + } + } + + grouping mpls-ldp-authentication-config { + description + "LDP authentication parameters container."; + + leaf enable { + type boolean; + default false; + description + "Enables LDP authentication on the node."; + } + + leaf authentication-key { + type oc-types:routing-password; + description + "authenticate LDP signaling + messages"; + reference + "RFC1321 The MD5 Message-Digest Algorithm + RFC5036 LDP Specification"; + } + } + + grouping admin-config { + description + "Re-usable grouping to enable or disable a particular LDP feature."; + + leaf enabled { + type boolean; + default false; + description + "When set to true, the functionality within which this leaf is + defined is enabled, when set to false it is explicitly disabled."; + } + } + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-rsvp.yang b/src/plugins/yang/openconfig/openconfig-mpls-rsvp.yang new file mode 100644 index 0000000..6b6f4ac --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-rsvp.yang @@ -0,0 +1,1446 @@ +module openconfig-mpls-rsvp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/rsvp"; + + prefix "oc-rsvp"; + + // import some basic types + import openconfig-inet-types { prefix inet; } + import openconfig-mpls-types { prefix oc-mplst; } + import openconfig-yang-types { prefix yang; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-interfaces { prefix oc-if; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Configuration for RSVP-TE signaling, including global protocol + parameters and LSP-specific configuration for constrained-path + LSPs"; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + // grouping statements + + grouping mpls-rsvp-soft-preemption-config { + description + "Configuration for MPLS soft preemption"; + leaf enable { + type boolean; + default false; + description + "Enables soft preemption on a node."; + } + + leaf soft-preemption-timeout { + type uint16 { + range 0..max; + } + default 30; + description + "Timeout value for soft preemption to revert + to hard preemption. The default timeout for + soft-preemption is 30 seconds - after which + the local system reverts to hard pre-emption."; + reference "RFC5712 MPLS-TE soft preemption"; + } + } + + grouping mpls-rsvp-soft-preemption { + description + "Top level group for MPLS soft preemption"; + container soft-preemption { + description + "Protocol options relating to RSVP + soft preemption"; + container config { + description + "Configuration parameters relating to RSVP + soft preemption support"; + uses mpls-rsvp-soft-preemption-config; + } + container state { + config false; + description + "State parameters relating to RSVP + soft preemption support"; + uses mpls-rsvp-soft-preemption-config; + } + } + } + + grouping mpls-rsvp-hellos-config { + description + "RSVP protocol options configuration."; + + leaf hello-interval { + type uint16 { + range 1000..60000; + } + units milliseconds; + default 9000; + description + "set the interval in ms between RSVP hello + messages"; + reference + "RFC 3209: RSVP-TE: Extensions to RSVP for + LSP Tunnels. + RFC 5495: Description of the Resource + Reservation Protocol - Traffic-Engineered + (RSVP-TE) Graceful Restart Procedures"; + } + + leaf refresh-reduction { + type boolean; + default true; + description + "enables all RSVP refresh reduction message + bundling, RSVP message ID, reliable message delivery + and summary refresh"; + reference + "RFC 2961 RSVP Refresh Overhead Reduction + Extensions"; + } + } + + grouping mpls-rsvp-hellos { + description + "Top level grouping for RSVP hellos parameters"; + // TODO: confirm that the described semantics are supported + // on various implementations. Finer grain configuration + // will be vendor-specific + + container hellos { + description + "Top level container for RSVP hello parameters"; + + container config { + description + "Configuration parameters relating to RSVP + hellos"; + uses mpls-rsvp-hellos-config; + } + container state { + config false; + description + "State information associated with RSVP hellos"; + uses mpls-rsvp-hellos-config; + } + } + } + + grouping mpls-rsvp-subscription-config { + description + "RSVP subscription configuration"; + + leaf subscription { + type oc-types:percentage; + description + "percentage of the interface bandwidth that + RSVP can reserve"; + } + } + + grouping mpls-rsvp-subscription-state { + description + "Operational state parameters relating to the + bandwidth subscription on an interface"; + + leaf calculated-absolute-subscription-bw { + type uint64; + units "kbps"; + description + "The calculated absolute value of the bandwidth + which is reservable to RSVP-TE on the interface + prior to any adjustments that may be made from + external sources."; + } + } + + grouping mpls-rsvp-subscription { + description + "Top level group for RSVP subscription options"; + + container subscription { + description + "Bandwidth percentage reservable by RSVP + on an interface"; + + container config { + description + "Configuration parameters relating to RSVP + subscription options"; + uses mpls-rsvp-subscription-config; + } + + container state { + config false; + description + "State parameters relating to RSVP + subscription options"; + uses mpls-rsvp-subscription-config; + uses mpls-rsvp-subscription-state; + } + } + } + + grouping mpls-rsvp-graceful-restart-config { + description + "Configuration parameters relating to RSVP Graceful-Restart"; + + leaf enable { + type boolean; + default false; + description + "Enables graceful restart on the node."; + } + + leaf restart-time { + type uint32; + description + "Graceful restart time (seconds)."; + reference + "RFC 5495: Description of the Resource + Reservation Protocol - Traffic-Engineered + (RSVP-TE) Graceful Restart Procedures"; + } + leaf recovery-time { + type uint32; + description + "RSVP state recovery time"; + } + } + + grouping mpls-rsvp-graceful-restart { + description + "Top level group for RSVP graceful-restart + parameters"; + + container graceful-restart { + description + "Operational state and configuration parameters relating to + graceful-restart for RSVP"; + + container config { + description + "Configuration parameters relating to + graceful-restart"; + uses mpls-rsvp-graceful-restart-config; + } + + container state { + config false; + description + "State information associated with + RSVP graceful-restart"; + uses mpls-rsvp-graceful-restart-config; + } + } + } + + grouping mpls-rsvp-authentication-config { + description + "RSVP authentication parameters container."; + + leaf enable { + type boolean; + default false; + description + "Enables RSVP authentication on the node."; + } + + leaf authentication-key { + type string { + // Juniper supports 1..16 while + // Cisco has a much bigger range, up to 60. + length "1..32"; + } + description + "authenticate RSVP signaling + messages"; + reference + "RFC 2747: RSVP Cryptographic Authentication"; + } + } + + grouping mpls-rsvp-authentication { + description + "Top level group for RSVP authentication, + as per RFC2747"; + + container authentication { + description + "Configuration and state parameters relating to RSVP + authentication as per RFC2747"; + + container config { + description + "Configuration parameters relating + to authentication"; + uses mpls-rsvp-authentication-config; + } + + container state { + config false; + description + "State information associated + with authentication"; + uses mpls-rsvp-authentication-config; + } + } + } + + grouping mpls-rsvp-protection-config { + description + "RSVP facility (link/node) protection configuration"; + + leaf link-protection-style-requested { + type identityref { + base oc-mplst:PROTECTION_TYPE; + } + default oc-mplst:LINK_NODE_PROTECTION_REQUESTED; + description + "Style of mpls frr protection desired: + link, link-node, or unprotected"; + } + + leaf bypass-optimize-interval { + type uint16; + units seconds; + description + "interval between periodic optimization + of the bypass LSPs"; + // note: this is interface specific on juniper + // on iox, this is global. need to resolve. + } + // to be completed, things like enabling link protection, + // optimization times, etc. + } + + grouping mpls-rsvp-link-protection { + description + "Top level group for RSVP protection"; + container protection { + description + "link-protection (NHOP) related configuration"; + + container config { + description + "Configuration for link-protection"; + uses mpls-rsvp-protection-config; + } + + container state { + config false; + description + "State for link-protection"; + uses mpls-rsvp-protection-config; + } + } + } + + grouping mpls-rsvp-statistics { + description + "Top level grouping for RSVP protocol state"; + + uses mpls-rsvp-protocol-state; + } + + grouping rsvp-global { + description + "Global RSVP protocol configuration"; + container rsvp-te { + description + "RSVP-TE global signaling protocol configuration"; + + uses mpls-rsvp-session-state; + + container neighbors { + description + "Configuration and state for RSVP neighbors connecting + to the device"; + + list neighbor { + key "address"; + + config false; + + description + "List of RSVP neighbors of the local system"; + + leaf address { + type leafref { + path "../state/address"; + } + description + "Reference to the address of the RSVP neighbor"; + } + + container state { + config false; + description + "Operational state parameters relating to the + RSVP neighbor"; + uses mpls-rsvp-neighbor-state; + } + } + } + + container global { + description + "Platform wide RSVP configuration and state"; + uses mpls-rsvp-graceful-restart; + uses mpls-rsvp-soft-preemption; + uses mpls-rsvp-hellos; + + container state { + config false; + description + "Platform wide RSVP state, including counters"; + // TODO - reconcile global and per-interface + // protocol-related statistics + + container counters { + config false; + description + "Platform wide RSVP statistics and counters"; + uses mpls-rsvp-global-protocol-state; + uses mpls-rsvp-statistics; + + container errors { + description + "Error counters associated with the global RSVP-TE + instance."; + uses mpls-rsvp-error-counters; + } + } + } + } + + container interface-attributes { + description + "Attributes relating to RSVP-TE enabled interfaces"; + + list interface { + key "interface-id"; + description + "list of per-interface RSVP configurations"; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "reference to the interface-id data"; + } + + + container config { + description + "Configuration of per-interface RSVP parameters"; + uses mpls-rsvp-interfaces-config; + } + + container state { + config false; + description + "Per-interface RSVP protocol and state information"; + + uses mpls-rsvp-interfaces-state; + uses mpls-rsvp-interfaces-config; + + container counters { + config false; + description + "Interface specific RSVP statistics and counters"; + uses mpls-rsvp-protocol-state; + uses mpls-rsvp-rate-limited-messages-state; + + container errors { + description + "Interface specific RSVP error counters"; + uses mpls-rsvp-error-counters; + } + } + } + + uses oc-if:interface-ref; + uses mpls-rsvp-interface-reservations; + uses mpls-rsvp-hellos; + uses mpls-rsvp-authentication; + uses mpls-rsvp-subscription; + uses mpls-rsvp-link-protection; + } + } + } + } + + grouping rsvp-p2p-tunnel-attributes-config { + description + "properties of RSVP point-to-point paths"; + + leaf source { + when "../signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type inet:ip-address; + description + "RSVP-TE tunnel source address"; + } + + leaf soft-preemption { + when "../signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type boolean; + default false; + description + "Enables RSVP soft-preemption on this LSP"; + } + + uses rsvp-priorities-tunnel-config; + } + + grouping rsvp-priorities-tunnel-config { + description + "Configuration paramters related to RSVP-TE priorities for + an LSP tunnel"; + + leaf setup-priority { + when "../signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type uint8 { + range 0..7; + } + default 7; + description + "RSVP-TE preemption priority during LSP setup, lower is + higher priority; default 7 indicates that LSP will not + preempt established LSPs during setup"; + reference "RFC 3209 - RSVP-TE: Extensions to RSVP for + LSP Tunnels"; + } + + leaf hold-priority { + when "../signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type uint8 { + range 0..7; + } + default 0; + description + "preemption priority once the LSP is established, + lower is higher priority; default 0 indicates other LSPs + will not preempt the LSPs once established"; + reference "RFC 3209 - RSVP-TE: Extensions to RSVP for + LSP Tunnels"; + } + } + + grouping rsvp-priorities-path-config { + description + "Configuration paramters related to RSVP-TE priorities on + a primary/secondary path associated with an LSP."; + + leaf setup-priority { + when "../../../../../" + + "config/signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type uint8 { + range 0..7; + } + default 7; + description + "RSVP-TE preemption priority during LSP setup, lower is + higher priority; default 7 indicates that LSP will not + preempt established LSPs during setup"; + reference "RFC 3209 - RSVP-TE: Extensions to RSVP for + LSP Tunnels"; + } + + leaf hold-priority { + when "../../../../../" + + "config/signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type uint8 { + range 0..7; + } + default 0; + description + "preemption priority once the LSP is established, + lower is higher priority; default 0 indicates other LSPs + will not preempt the LSPs once established"; + reference "RFC 3209 - RSVP-TE: Extensions to RSVP for + LSP Tunnels"; + } + } + + grouping rsvp-p2p-path-attributes-config { + description + "properties of RSPP point-to-point paths"; + + uses rsvp-priorities-path-config; + + leaf retry-timer { + when "../../../../../" + + "config/signaling-protocol = 'PATH_SETUP_RSVP'" { + description + "When the signaling protocol is RSVP-TE "; + } + type uint16 { + range 1..600; + } + units seconds; + description + "sets the time between attempts to establish the + LSP"; + } + } + + grouping mpls-rsvp-neighbor-state { + description + "State information for RSVP neighbors"; + + leaf address { + type inet:ip-address; + description + "Address of RSVP neighbor"; + } + + leaf detected-interface { + type string; + description + "Interface where RSVP neighbor was detected"; + } + + leaf neighbor-status { + type enumeration { + enum UP { + description + "RSVP hello messages are detected from the neighbor"; + } + enum DOWN { + description + "RSVP neighbor not detected as up, due to a + communication failure or IGP notification + the neighbor is unavailable"; + } + } + description + "Enumuration of possible RSVP neighbor states"; + } + + leaf refresh-reduction { + type boolean; + description + "Suppport of neighbor for RSVP refresh reduction"; + reference + "RFC 2961 RSVP Refresh Overhead Reduction + Extensions"; + } + + } + + grouping mpls-rsvp-session-state { + description + "State information for RSVP TE sessions"; + + container sessions { + description + "Enclosing container for sessions"; + + list session { + key "local-index"; + config false; + + description + "List of RSVP sessions"; + + leaf local-index { + type leafref { + path "../state/local-index"; + } + description + "Reference to the local index for the RSVP + session"; + } + + uses mpls-rsvp-record-route-object-top; + uses mpls-rsvp-explicit-route-object-top; + + container state { + description + "Operational state parameters relating to the + RSVP session"; + + leaf local-index { + type uint64; + description + "The index used to identify the RSVP session + on the local network element. This index is + generated by the device and is unique only + to the local network element."; + } + + leaf source-address { + type inet:ip-address; + description + "Origin address of RSVP session"; + } + + leaf destination-address { + type inet:ip-address; + description + "Destination address of RSVP session"; + } + + leaf tunnel-id { + type uint16; + description + "The tunnel ID is an identifier used in the + RSVP session, which remains constant over + the life of the tunnel."; + reference "RFC 3209"; + } + + leaf lsp-id { + type uint16; + description + "The LSP ID distinguishes between two LSPs + originated from the same headend, and is + commonly used to distinguish RSVP sessions + during make before break operations."; + reference "RFC 3209"; + } + + leaf session-name { + type string; + description + "The signaled name of this RSVP session."; + } + + leaf status { + type enumeration { + enum UP { + description + "RSVP session is up"; + } + enum DOWN { + description + "RSVP session is down"; + } + } + description + "Enumeration of RSVP session states"; + } + + leaf type { + type identityref { + base oc-mplst:LSP_ROLE; + } + description + "The type/role of the RSVP session, signifing + the session's role on the current device, such as + a transit session vs. an ingress session."; + } + + leaf protection-requested { + type identityref { + base oc-mplst:PROTECTION_TYPE; + } + description + "The type of protection requested for the RSVP session"; + } + + leaf label-in { + type oc-mplst:mpls-label; + description + "Incoming MPLS label associated with this RSVP session"; + } + + leaf label-out { + type oc-mplst:mpls-label; + description + "Outgoing MPLS label associated with this RSVP session"; + } + + container sender-tspec { + description + "Operational state statistics relating to the SENDER_TSPEC + received for the RSVP session"; + + leaf rate { + type oc-types:ieeefloat32; + units "Bps"; + description + "The rate at which the head-end device generates traffic, + expressed in bytes per second."; + reference + "RFC2210: RSVP with INTSERV"; + } + + leaf size { + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The size of the token bucket that is used to determine + the rate at which the head-end device generates traffic, + expressed in bytes per second."; + reference + "RFC2210: RSVP with INTSERV"; + } + + leaf peak-data-rate { + type union { + type oc-types:ieeefloat32; + type enumeration { + enum INFINITY { + description + "The head-end device has no maximum data rate."; + } + } + } + units "bytes per second"; + description + "The maximum traffic generation rate that the head-end + device sends traffic at."; + reference + "RFC2210: RSVP with INTSERV"; + } + } + } + } + } + } //rsvp-session-state + + grouping mpls-rsvp-interfaces-config { + description + "RSVP configuration information relevant to an interface"; + + leaf interface-id { + type oc-if:interface-id; + description + "Identifier for the interface"; + } + } + + grouping mpls-rsvp-interfaces-state { + description + "RSVP state information relevant to an interface"; + + leaf max-link-bandwidth { + type oc-mplst:bandwidth-kbps; + description + "The maximum link bandwidth expressed in kilobits + per second. This value should be the same (other than + the units) as the value that is advertised into the + IGP traffic engineering database."; + } + } + + grouping mpls-rsvp-interface-reservations { + description + "Operational state related to interface bandwidth + reservations"; + + container bandwidth-reservations { + description + "Enclosing container for bandwidth reservation"; + list bandwidth-reservation { + key "priority"; + config false; + description + "Available and reserved bandwidth by priority on + the interface."; + + leaf priority { + type leafref { + path "../state/priority"; + } + description "Reference to the RSVP priority level"; + } + + container state { + description + "Operational state parameters relating to a + bandwidth reservation at a certain priority"; + + leaf priority { + type union { + type uint8 { + range 0..7; + } + type enumeration { + enum ALL { + description + "The ALL keyword represents the overall + state of the interface - i.e., the union + of all of the priority levels"; + } + } + } + description + "RSVP priority level for LSPs traversing the interface"; + } + + leaf available-bandwidth { + type oc-mplst:bandwidth-mbps; + description + "Bandwidth currently available with the priority level, + or for the entire interface when the priority is set to + ALL"; + } + + leaf reserved-bandwidth { + type oc-mplst:bandwidth-mbps; + description + "Bandwidth currently reserved within the priority level, + or the sum of all priority levels when the keyword is set + to ALL"; + } + + leaf active-reservations-count { + type yang:gauge64; + description + "Number of active RSVP reservations in the associated + priority, or the sum of all reservations when the priority + level is set to ALL"; + } + + leaf highwater-mark { + type oc-mplst:bandwidth-mbps; + description + "Maximum bandwidth reserved on the interface within the + priority, or across all priorities in the case that the + priority level is set to ALL"; + } + } + } + } + } + + grouping mpls-rsvp-global-protocol-state { + description + "RSVP protocol statistics which may not apply + on an interface, but are significant globally."; + + leaf path-timeouts { + type yang:counter64; + description + "The number of Path State Blocks (PSBs) that + have been timed out by the local system."; + } + + leaf reservation-timeouts { + type yang:counter64; + description + "The number of Reservation State Blocks (RSBs) that + have been timed out by the local system."; + } + + uses mpls-rsvp-rate-limited-messages-state; + } + + grouping mpls-rsvp-rate-limited-messages-state { + description + "Common grouping for rate limit messages"; + + leaf rate-limited-messages { + type yang:counter64; + description + "RSVP messages dropped due to rate limiting"; + } + } + + grouping mpls-rsvp-protocol-state { + description + "RSVP protocol statistics and message counters"; + + leaf in-path-messages { + type yang:counter64; + description + "Number of received RSVP Path messages"; + } + + leaf in-path-error-messages { + type yang:counter64; + description + "Number of received RSVP Path Error messages"; + } + + leaf in-path-tear-messages { + type yang:counter64; + description + "Number of received RSVP Path Tear messages"; + } + + leaf in-reservation-messages { + type yang:counter64; + description + "Number of received RSVP Resv messages"; + } + + leaf in-reservation-error-messages { + type yang:counter64; + description + "Number of received RSVP Resv Error messages"; + } + + leaf in-reservation-tear-messages { + type yang:counter64; + description + "Number of received RSVP Resv Tear messages"; + } + + leaf in-hello-messages { + type yang:counter64; + description + "Number of received RSVP hello messages"; + } + + leaf in-srefresh-messages { + type yang:counter64; + description + "Number of received RSVP summary refresh messages"; + } + + leaf in-ack-messages { + type yang:counter64; + description + "Number of received RSVP refresh reduction ack + messages"; + } + + leaf out-path-messages { + type yang:counter64; + description + "Number of sent RSVP PATH messages"; + } + + leaf out-path-error-messages { + type yang:counter64; + description + "Number of sent RSVP Path Error messages"; + } + + leaf out-path-tear-messages { + type yang:counter64; + description + "Number of sent RSVP Path Tear messages"; + } + + leaf out-reservation-messages { + type yang:counter64; + description + "Number of sent RSVP Resv messages"; + } + + leaf out-reservation-error-messages { + type yang:counter64; + description + "Number of sent RSVP Resv Error messages"; + } + + leaf out-reservation-tear-messages { + type yang:counter64; + description + "Number of sent RSVP Resv Tear messages"; + } + + leaf out-hello-messages { + type yang:counter64; + description + "Number of sent RSVP hello messages"; + } + + leaf out-srefresh-messages { + type yang:counter64; + description + "Number of sent RSVP summary refresh messages"; + } + + leaf out-ack-messages { + type yang:counter64; + description + "Number of sent RSVP refresh reduction ack messages"; + } + } + + grouping mpls-rsvp-record-route-object-top { + description + "Top-level structure grouping for list of record route + objects."; + + container record-route-objects { + description + "Enclosing container for MPLS RRO objects associated with the + traffic engineered tunnel."; + + list record-route-object { + key "index"; + config false; + + description + "Read-only list of record route objects associated with the + traffic engineered tunnel. Each entry in the list + may contain a hop IP address, MPLS label allocated + at the hop, and the flags associated with the entry."; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to the index of the record route object. + The index is used to indicate the ordering of hops in + the path."; + } + + container state { + config false; + + description + "Information related to RRO objects. The hop, label, and + optional flags are present for each entry in the list."; + + uses mpls-rsvp-record-route-object-state; + } + } + } + } + + grouping mpls-rsvp-record-route-object-state { + description + "Grouping to hold information relating to record route + objects relevant to a traffic engineering LSP."; + + leaf index { + type uint8; + description + "Index of object in the list. Used for ordering."; + } + + leaf address { + type inet:ip-address; + description + "IP router hop for RRO entry"; + } + + leaf reported-label { + type oc-mplst:mpls-label; + description + "Label reported for RRO hop"; + } + + leaf reported-flags { + type uint8; + description + "Subobject flags for MPLS label"; + } + } + + grouping mpls-rsvp-explicit-route-object-top { + description + "Top-level structure for explicit-route objects."; + + container explicit-route-objects { + description + "Enclosing container for MPLS ERO objects associated + with the traffic engineered tunnel."; + + list explicit-route-object { + key "index"; + + config false; + + description + "Read-only list of explicit route objects associated with the + traffic-engineered tunnel. Each entry in the list contains + a hop IP address, and the MPLS label allocated at the hop."; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to the index of the entry in the explicit route + object. The index is used to indicate the ordering of hops + in the path."; + } + + container state { + config false; + description + "Information related to the ERO index."; + uses mpls-rsvp-explicit-route-object-state; + } + } + } + } + + grouping mpls-rsvp-explicit-route-object-state { + description + "Grouping defining information related to an individual hop + of an ERO."; + + leaf index { + type uint64; + description + "Index of the entry in the ERO. Entries are ordered in + ascending order from the source to destination of the + LSP."; + } + + leaf loose { + type boolean; + description + "When set to true, indicates that the hop of the ERO is + a loose hop within the explicit route. If unset, indicates + that the hop must explicitly traverse the entity specified + in the ERO hop as the next-entity."; + } + + leaf type { + type enumeration { + enum IPV4 { + description + "The hop represents an IPv4 prefix."; + reference "RFC3209"; + } + enum IPV6 { + description + "The hop represents an IPv6 prefix."; + reference "RFC3209"; + } + enum ASN { + description + "The hop represents an autonomous system number."; + reference "RFC3209"; + } + enum ASN4 { + description + "The hop represents a 4-byte autonomous system number."; + } + enum LABEL { + description + "The hop represents an MPLS label."; + reference "RFC3473"; + } + enum UNNUMBERED_INTERFACE { + description + "The hop represents an unnumbered interface."; + reference "RFC3477"; + } + } + description + "The type of hop indicated by the ERO entry."; + } + + leaf ip-prefix { + type inet:ip-prefix; + description + "The IPv4 or IPv6 prefix indicated by the ERO. Specified + only when the ERO hop is an IPv4 or IPv6 prefix."; + } + + leaf asn { + type inet:as-number; + description + "The autonomous system number indicated by the ERO. Specified + only when the ERO hop is an 2 or 4-byte AS number."; + } + + leaf label { + type oc-mplst:mpls-label; + description + "The MPLS label specified in the ERO hop. Specified only when + the hop is an MPLS label."; + } + + leaf interface-id { + type uint32; + description + "The interface ID for an unnumbered interface. Specified only + when the ERO hop is a unnumbered interface."; + } + reference + "RFC3477 - Signalling Unnumbered Links in Resource + ReSerVation Protocol - Traffic Engineering (RSVP-TE)"; + + } + + grouping mpls-rsvp-error-counters { + description + "Grouping containing definitions of leaves relating to + errors in RSVP-TE. This grouping can be used in different + contexts - e.g., per-RSVP-TE protocol instance, or per- + interface such that the errors represented should + correspond to the number of errors that have occurred for + the context in which the grouping is used."; + + leaf authentication-fail { + type yang:counter64; + description + "The number of packets received that have failed RSVP-TE + authentication checks in the specified context."; + } + + leaf bad-checksum { + type yang:counter64; + description + "The number of packets received that have an incorrect RSVP-TE + checksum in the context."; + } + + leaf bad-packet-format { + type yang:counter64; + description + "The number of packets received that were dropped due to being + badly formed in the context."; + } + + leaf bad-packet-length { + type yang:counter64; + description + "The number of packets received that were dropped due to having + an invalid length specified in the context."; + } + + leaf out-of-order { + type yang:counter64; + description + "The number of messages received out of order in the context."; + } + + leaf received-nack { + type yang:counter64; + description + "The number of NACK RESV messages received in the context."; + } + + leaf transmit-failure { + type yang:counter64; + description + "The total number of packets dropped on transmit in the context."; + } + + leaf transmit-queue-full { + type yang:counter64; + description + "The number of packets dropped due to the transmit queue being + full in the context."; + } + + leaf unknown-ack { + type yang:counter64; + description + "The number of packets received containing an ACK for an unknown + message ID in the context."; + } + + leaf unknown-nack { + type yang:counter64; + description + "The number of packets received containing a NACK for an unknown + message ID in the context."; + } + } + + + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-sr.yang b/src/plugins/yang/openconfig/openconfig-mpls-sr.yang new file mode 100644 index 0000000..7485b2d --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-sr.yang @@ -0,0 +1,138 @@ +module openconfig-mpls-sr { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/mpls-sr"; + + prefix "oc-mpls-sr"; + + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Configuration for MPLS with segment routing-based LSPs, + including global parameters, and LSP-specific configuration for + both constrained-path and IGP-congruent LSPs"; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + grouping sr-path-attributes-config { + description + "Configuration parameters relating to SR-TE LSPs"; + + leaf sid-selection-mode { + type enumeration { + enum ADJ_SID_ONLY { + description + "The SR-TE tunnel should only use adjacency SIDs + to build the SID stack to be pushed for the LSP"; + } + enum MIXED_MODE { + description + "The SR-TE tunnel can use a mix of adjacency + and prefix SIDs to build the SID stack to be pushed + to the LSP"; + } + } + default MIXED_MODE; + description + "The restrictions placed on the SIDs to be selected by the + calculation method for the explicit path when it is + instantiated for a SR-TE LSP"; + } + + leaf sid-protection-required { + type boolean; + default "false"; + description + "When this value is set to true, only SIDs that are + protected are to be selected by the calculating method + when the explicit path is instantiated by a SR-TE LSP."; + } + } + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-static.yang b/src/plugins/yang/openconfig/openconfig-mpls-static.yang new file mode 100644 index 0000000..493b5f8 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-static.yang @@ -0,0 +1,312 @@ +submodule openconfig-mpls-static { + + yang-version "1"; + + belongs-to "openconfig-mpls" { + prefix "mpls"; + } + + // import some basic types + import openconfig-mpls-types {prefix oc-mplst; } + import openconfig-inet-types { prefix inet; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Defines static LSP configuration"; + + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + // grouping statements + + grouping static-lsp-common-config { + description + "common definitions for static LSPs"; + + leaf next-hop { + type inet:ip-address; + description + "next hop IP address for the LSP"; + } + + leaf incoming-label { + type oc-mplst:mpls-label; + description + "label value on the incoming packet"; + } + + leaf push-label { + type oc-mplst:mpls-label; + description + "label value to push at the current hop for the + LSP"; + } + } + + grouping static-lsp-ingress-config { + description + "Configuration data for ingress LSPs"; + + uses static-lsp-common-config; + } + + grouping static-lsp-ingress-state { + description + "Operational state data for ingress LSPs"; + } + + grouping static-lsp-ingress-top { + description + "Top-level grouping for ingress LSP data"; + + container ingress { + description + "Static LSPs for which the router is an + ingress node"; + + container config { + description + "Configuration data for ingress LSPs"; + + uses static-lsp-ingress-config; + } + + container state { + + config false; + + description + "Operational state data for ingress LSPs"; + + uses static-lsp-ingress-config; + uses static-lsp-ingress-state; + } + } + } + + grouping static-lsp-transit-config { + description + "Configuration data for transit LSPs"; + + uses static-lsp-common-config; + } + + grouping static-lsp-transit-state { + description + "Operational state data for transit LSPs"; + } + + grouping static-lsp-transit-top { + description + "Top-level grouping for transit LSP data"; + + container transit { + description + "Static LSPs for which the router is an + transit node"; + + container config { + description + "Configuration data for transit LSPs"; + + uses static-lsp-transit-config; + } + + container state { + + config false; + + description + "Operational state data for transit LSPs"; + + uses static-lsp-transit-config; + uses static-lsp-transit-state; + } + } + } + + grouping static-lsp-egress-config { + description + "Configuration data for egress LSPs"; + + uses static-lsp-common-config; + } + + grouping static-lsp-egress-state { + description + "Operational state data for egress LSPs"; + } + + grouping static-lsp-egress-top { + description + "Top-level grouping for egress LSP data"; + + container egress { + description + "Static LSPs for which the router is an + egress node"; + + container config { + description + "Configuration data for egress LSPs"; + + uses static-lsp-egress-config; + } + + container state { + + config false; + + description + "Operational state data for egress LSPs"; + + uses static-lsp-egress-config; + uses static-lsp-egress-state; + } + } + } + + grouping static-lsp-config { + description + "Configuration data for static LSPs"; + + leaf name { + type string; + description + "name to identify the LSP"; + } + } + + grouping static-lsp-state { + description + "Operational state data for static LSPs"; + + } + + grouping static-lsp-top { + description + "grouping for top level list of static LSPs"; + + + list static-lsp { + key "name"; + description + "list of defined static LSPs"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference the name list key"; + } + + container config { + description + "Configuration data for the static lsp"; + + uses static-lsp-config; + } + + container state { + config false; + + description + "Operational state data for the static lsp"; + + uses static-lsp-config; + uses static-lsp-state; + + } + + // TODO: separation into ingress, transit, egress may help + // to figure out what exactly is configured, but need to + // consider whether implementations can support the + // separation + uses static-lsp-ingress-top; + uses static-lsp-transit-top; + uses static-lsp-egress-top; + } + } + + // data definition statements + + // augment statements + + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-te.yang b/src/plugins/yang/openconfig/openconfig-mpls-te.yang new file mode 100644 index 0000000..e5142f1 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-te.yang @@ -0,0 +1,1381 @@ +submodule openconfig-mpls-te { + + yang-version "1"; + + belongs-to "openconfig-mpls" { + prefix "oc-mpls"; + } + + + // import some basic types + import openconfig-inet-types { prefix inet; } + import openconfig-mpls-rsvp { prefix oc-rsvp; } + import openconfig-mpls-sr { prefix oc-sr; } + import openconfig-mpls-types {prefix oc-mplst; } + import openconfig-types { prefix oc-types; } + import openconfig-yang-types { prefix yang; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Configuration related to constrained-path LSPs and traffic + engineering. These definitions are not specific to a particular + signaling protocol or mechanism (see related submodules for + signaling protocol-specific configuration)."; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + // typedef statements + + typedef te-bandwidth-type { + type enumeration { + enum SPECIFIED { + description + "Bandwidth is explicitly specified"; + } + enum AUTO { + description + "Bandwidth is automatically computed"; + } + } + description + "enumerated type for specifying whether bandwidth is + explicitly specified or automatically computed"; + } + + typedef mpls-srlg-flooding-type { + type enumeration { + enum FLOODED_SRLG { + description + "SRLG is flooded in the IGP"; + } + enum STATIC_SRLG { + description + "SRLG is not flooded, the members are + statically configured"; + } + } + description + "Enumerated bype for specifying how the SRLG is flooded"; + } + + typedef mpls-hop-type { + type enumeration { + enum LOOSE { + description + "loose hop in an explicit path"; + } + enum STRICT { + description + "strict hop in an explicit path"; + } + } + description + "enumerated type for specifying loose or strict + paths"; + } + + typedef te-metric-type { + type union { + type enumeration { + enum IGP { + description + "set the LSP metric to track the underlying + IGP metric"; + } + } + type uint32; + } + description + "union type for setting the LSP TE metric to a + static value, or to track the IGP metric"; + } + + typedef cspf-tie-breaking { + type enumeration { + enum RANDOM { + description + "CSPF calculation selects a random path among + multiple equal-cost paths to the destination"; + } + enum LEAST_FILL { + description + "CSPF calculation selects the path with greatest + available bandwidth"; + } + enum MOST_FILL { + description + "CSPF calculation selects the path with the least + available bandwidth"; + } + } + default RANDOM; + description + "type to indicate the CSPF selection policy when + multiple equal cost paths are available"; + } + + + // grouping statements + + grouping te-tunnel-reoptimize-config { + description + "Definition for reoptimize timer configuration"; + + leaf reoptimize-timer { + type uint16; + units seconds; + description + "frequency of reoptimization of + a traffic engineered LSP"; + } + } + + grouping te-lsp-auto-bandwidth-config { + description + "Configuration parameters related to autobandwidth"; + + leaf enabled { + type boolean; + default false; + description + "enables mpls auto-bandwidth on the + lsp"; + } + + leaf min-bw { + type oc-mplst:bandwidth-kbps; + description + "set the minimum bandwidth in Kbps for an + auto-bandwidth LSP"; + } + + leaf max-bw { + type oc-mplst:bandwidth-kbps; + description + "set the maximum bandwidth in Kbps for an + auto-bandwidth LSP"; + } + + leaf adjust-interval { + type uint32; + description + "time in seconds between adjustments to + LSP bandwidth"; + } + + leaf adjust-threshold { + type oc-types:percentage; + description + "percentage difference between the LSP's + specified bandwidth and its current bandwidth + allocation -- if the difference is greater than the + specified percentage, auto-bandwidth adjustment is + triggered"; + } + } + + grouping te-lsp-auto-bandwidth-state { + description + "Operational state parameters relating to auto-bandwidth"; + + leaf interval-high-bw { + type oc-mplst:bandwidth-kbps; + description + "The maximum measured bandwidth during the current + auto-bandwidth adjust interval expressed in kilobits + per second."; + } + } + + grouping te-lsp-overflow-config { + description + "configuration for mpls lsp bandwidth + overflow adjustment"; + + leaf enabled { + type boolean; + default false; + description + "enables mpls lsp bandwidth overflow + adjustment on the lsp"; + } + + leaf overflow-threshold { + type oc-types:percentage; + description + "bandwidth percentage change to trigger + an overflow event"; + + } + + leaf trigger-event-count { + type uint16; + description + "number of consecutive overflow sample + events needed to trigger an overflow adjustment"; + } + } + + grouping te-lsp-underflow-config { + description + "configuration for mpls lsp bandwidth + underflow adjustment"; + + leaf enabled { + type boolean; + default false; + description + "enables bandwidth underflow + adjustment on the lsp"; + } + + leaf underflow-threshold { + type oc-types:percentage; + description + "bandwidth percentage change to trigger + and underflow event"; + } + + leaf trigger-event-count { + type uint16; + description + "number of consecutive underflow sample + events needed to trigger an underflow adjustment"; + } + } + + grouping te-path-placement-constraints-config { + description + "Configuration data for link affinities"; + + leaf-list exclude-group { + type leafref { + path "../../../../../../../../../../te-global-attributes" + + "/mpls-admin-groups/admin-group/admin-group-name"; + } + description + "list of references to named admin-groups to exclude in + path calculation."; + } + + leaf-list include-all-group { + type leafref { + path "../../../../../../../../../../te-global-attributes" + + "/mpls-admin-groups/admin-group/admin-group-name"; + } + description + "list of references to named admin-groups of which all must + be included"; + } + + leaf-list include-any-group { + type leafref { + path "../../../../../../../../../../te-global-attributes" + + "/mpls-admin-groups/admin-group/admin-group-name"; + } + description + "list of references to named admin-groups of which one must + be included"; + } + } + + grouping te-path-placement-constraints-state { + description + "Operational state data for link affinities"; + //TODO: currently a placeholder + } + + grouping te-path-placement-constraints-top { + description + "Top-level grouping "; + + container admin-groups { + description + "Top-level container for include/exclude constraints for + link affinities"; + + container config { + description + "Configuration data "; + + uses te-path-placement-constraints-config; + } + + container state { + config false; + + description + "Operational state data "; + + uses te-path-placement-constraints-config; + uses te-path-placement-constraints-state; + } + } + } + + grouping te-tunnel-protection-config { + description + "Configuration parameters related to LSP + protection"; + leaf protection-style-requested { + type identityref { + base oc-mplst:PROTECTION_TYPE; + } + default oc-mplst:UNPROTECTED; + description + "style of mpls frr protection desired: can be + link, link-node or unprotected."; + } + } + + grouping explicit-route-subobject-config { + description + "The explicit route subobject grouping"; + + leaf address { + type inet:ip-address; + description + "router hop for the LSP path"; + } + + leaf hop-type { + type mpls-hop-type; + description + "strict or loose hop"; + } + + leaf index { + type uint8 { + range "0..255"; + } + description + "Index of this explicit route object to express + the order of hops in the path"; + } + + } + + grouping named-explicit-path-config { + description + "Configuration parameters relating to a named + explicit path"; + + leaf name { + type string; + description + "A string name that uniquely identifies an explicit + path"; + } + } + + // Explicit paths config somewhat following the IETF model + grouping explicit-paths-top { + description + "Top level global explicit path configuration + grouping"; + + container named-explicit-paths { + description + "Enclosing container for the named explicit paths"; + list named-explicit-path { + key "name"; + description + "A list of explicit paths"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "A string name that uniquely identifies + an explicit path"; + } + + container config { + description + "Configuration parameters relating to named explicit + paths"; + uses named-explicit-path-config; + uses oc-sr:sr-path-attributes-config; + } + + container state { + config false; + description + "Operational state parameters relating to the named + explicit paths"; + uses named-explicit-path-config; + uses oc-sr:sr-path-attributes-config; + } + + container explicit-route-objects { + description + "Enclosing container for EROs"; + + list explicit-route-object { + key "index"; + description + "List of explicit route objects"; + + leaf index { + type leafref { + path "../config/index"; + } + + description + "Index of this explicit route object, + to express the order of hops in path"; + } + + container config { + description + "Configuration parameters relating to an explicit + route"; + uses explicit-route-subobject-config; + } + + + container state { + config false; + description + "State parameters relating to an explicit route"; + uses explicit-route-subobject-config; + } + } + } + } + } + } + + grouping mpls-te-srlg-config { + description + "Configuration of various attributes associated + with the SRLG"; + + leaf name { + type string; + description + "SRLG group identifier"; + } + + leaf value { + type uint32; + description + "group ID for the SRLG"; + } + + leaf cost { + type uint32; + description + "The cost of the SRLG to the computation + algorithm"; + } + + leaf flooding-type { + type mpls-srlg-flooding-type; + default FLOODED_SRLG; + description + "The type of SRLG, either flooded in the IGP or + statically configured"; + } + } + + grouping mpls-te-srlg-members-config { + description + "Configuration of the membership of the SRLG"; + + leaf from-address { + type inet:ip-address; + description + "IP address of the a-side of the SRLG link"; + } + + leaf to-address { + type inet:ip-address; + description + "IP address of the z-side of the SRLG link"; + } + } + + grouping mpls-te-srlg-top { + description + "Top level grouping for MPLS shared + risk link groups."; + + container srlgs { + description + "Shared risk link groups attributes"; + list srlg { + key "name"; + description + "List of shared risk link groups"; + + leaf name { + type leafref { + path "../config/name"; + // Requires YANG 1.1 + //require-instance true; + } + description + "The SRLG group identifier"; + } + + container config { + description + "Configuration parameters related to the SRLG"; + uses mpls-te-srlg-config; + } + + container state { + config false; + description + "State parameters related to the SRLG"; + uses mpls-te-srlg-config; + } + + container static-srlg-members { + when "../config/flooding-type = 'STATIC_SRLG'" { + description + "Include this container for static + SRLG specific configuration"; + } + description + "SRLG members for static (not flooded) SRLGs "; + + list members-list { + key "from-address"; + description + "List of SRLG members, which are expressed + as IP address endpoints of links contained in the + SRLG"; + + leaf from-address { + type leafref { + path "../config/from-address"; + // Requires YANG 1.1 + //require-instance true; + } + description + "The from address of the link in the SRLG"; + } + + container config { + description + "Configuration parameters relating to the + SRLG members"; + uses mpls-te-srlg-members-config; + } + + container state { + config false; + description + "State parameters relating to the SRLG + members"; + uses mpls-te-srlg-members-config; + } + } + } + } + } + } + + grouping te-global-tunnel-config { + description + "Configuration parameters relevant to a single + traffic engineered tunnel."; + + leaf name { + type string; + description + "The tunnel name"; + } + + leaf type { + type identityref { + base oc-mplst:TUNNEL_TYPE; + } + description + "Tunnel type, p2p or p2mp"; + } + + leaf signaling-protocol { + type identityref { + base oc-mplst:PATH_SETUP_PROTOCOL; + } + description + "Signaling protocol used to set up this tunnel"; + } + + leaf description { + type string; + description + "optional text description for the tunnel"; + } + + leaf admin-status { + type identityref { + base oc-mplst:TUNNEL_ADMIN_STATUS; + } + default oc-mplst:ADMIN_UP; + description + "TE tunnel administrative state."; + } + + leaf preference { + type uint8 { + range "1..255"; + } + description + "Specifies a preference for this tunnel. + A lower number signifies a better preference"; + } + + leaf metric-type { + type identityref { + base oc-mplst:LSP_METRIC_TYPE; + } + default oc-mplst:LSP_METRIC_INHERITED; + description + "The type of metric specification that should be used to set + the LSP(s) metric"; + } + + leaf metric { + type int32; + description + "The value of the metric that should be specified. The value + supplied in this leaf is used in conjunction with the metric + type to determine the value of the metric used by the system. + Where the metric-type is set to LSP_METRIC_ABSOLUTE - the + value of this leaf is used directly; where it is set to + LSP_METRIC_RELATIVE, the relevant (positive or negative) + offset is used to formulate the metric; where metric-type + is LSP_METRIC_INHERITED, the value of this leaf is not + utilised"; + } + + leaf shortcut-eligible { + type boolean; + default "true"; + description + "Whether this LSP is considered to be eligible for us as a + shortcut in the IGP. In the case that this leaf is set to + true, the IGP SPF calculation uses the metric specified to + determine whether traffic should be carried over this LSP"; + } + + leaf protection-style-requested { + type identityref { + base oc-mplst:PROTECTION_TYPE; + } + default oc-mplst:UNPROTECTED; + description + "style of mpls frr protection desired: can be + link, link-node or unprotected."; + } + + uses te-tunnel-reoptimize-config; + uses oc-rsvp:rsvp-p2p-tunnel-attributes-config; + + } + + grouping tunnel-p2p-attributes-config { + description + "Configuration related to p2p LSPs"; + leaf destination { + type inet:ip-address; + description + "P2P tunnel destination address"; + } + } + + grouping p2p-path-state { + description + "Operational state parameters for p2p paths"; + + leaf-list associated-rsvp-sessions { + type leafref { + path "../../../../../../../../../signaling-protocols/" + + "rsvp-te/sessions/session/local-index"; + } + description + "If the signalling protocol specified for this path is + RSVP-TE, this leaf-list provides a reference to the associated + sessions within the RSVP-TE protocol sessions list, such + that details of the signaling can be retrieved. More than + one session may exist during re-signalling such as + make-before-break."; + } + + leaf spf-metric { + type uint64; + description + "The IGP metric of the shortest path to the LSP destination. + This value is used to compare the current metric of the + constrained path to the shortest path that is available in + the network topology."; + } + + leaf cspf-metric { + type uint64; + description + "The IGP metric of the path currently used by the LSP. + This value is used to represent the metric of the path + used by the LSP following the execution of the CSPF + algorithm and signalling of the LSP."; + } + } + + grouping p2p-path-config { + description + "Configuration parameters for p2p paths"; + + leaf name { + type string; + description + "Path name"; + } + + leaf path-computation-method { + type identityref { + base oc-mplst:PATH_COMPUTATION_METHOD; + } + default oc-mplst:LOCALLY_COMPUTED; + description + "The method used for computing the path, either + locally computed, queried from a server or not + computed at all (explicitly configured)."; + } + + leaf use-cspf { + when "../path-computation-method = 'LOCALLY_COMPUTED'" { + description + "The use of cspf when the path-computation method is + local computation"; + } + type boolean; + description + "Flag to enable CSPF for locally computed LSPs"; + } + + leaf cspf-tiebreaker { + when "../path-computation-method = 'LOCALLY_COMPUTED'" { + description + "The cspf tiebreaking method when the path is + locally computed"; + } + type cspf-tie-breaking; + description + "Determine the tie-breaking method to choose between + equally desirable paths during CSFP computation"; + } + + + leaf path-computation-server { + when "../path-computation-method = 'EXTERNALLY_QUERIED'" { + description + "The path-computation server when the path is + externally queried"; + } + type inet:ip-address; + description + "Address of the external path computation + server"; + } + + leaf explicit-path-name { + when "../path-computation-method = 'EXPLICITLY_DEFINED'" { + description + "The name of the explicitly defined path used"; + } + + type leafref { + path "../../../../../../../" + + "named-explicit-paths/named-explicit-path/" + + "config/name"; + // Requires YANG 1.1 + //require-instance true; + } + description + "reference to a defined path"; + } + + leaf preference { + type uint8 { + range "1..255"; + } + description + "Specifies a preference for this path. The lower the + number higher the preference"; + } + + uses oc-rsvp:rsvp-p2p-path-attributes-config; + } + + + grouping te-tunnel-p2p-top { + description + "Top level grouping for p2p configuration"; + + container p2p-tunnel-attributes { + when "../config/type = 'P2P'" { + description + "Include this container for LSPs of type P2P"; + } + description + "Parameters related to LSPs of type P2P"; + + container config { + description + "Configuration parameters for P2P LSPs"; + uses tunnel-p2p-attributes-config; + } + + container state { + config false; + description + "State parameters for P2P LSPs"; + uses tunnel-p2p-attributes-config; + } + + uses p2p-primary-paths-top; + uses p2p-secondary-paths-top; + } + } + + + grouping te-tunnel-state { + description + "Counters and statistical data relevent to a single + tunnel."; + + leaf oper-status { + type identityref { + base oc-mplst:LSP_OPER_STATUS; + } + description + "The operational status of the TE tunnel"; + } + + leaf role { + type identityref { + base oc-mplst:LSP_ROLE; + } + description + "The lsp role at the current node, whether it is headend, + transit or tailend."; + } + + leaf auto-generated { + type boolean; + description + "If the LSP was auto-generated by the system this leaf + should be set to true. Examples of auto-generated LSPs + are dynamically created backup LSPs to meet a FRR + policy."; + } + + container counters { + description + "State data for MPLS label switched paths. This state + data is specific to a single label switched path."; + + leaf bytes { + type yang:counter64; + description + "Number of bytes that have been forwarded over the + label switched path."; + } + + leaf packets { + type yang:counter64; + description + "Number of pacets that have been forwarded over the + label switched path."; + } + + leaf path-changes { + type yang:counter64; + description + "Number of path changes for the label switched path"; + } + + leaf state-changes { + type yang:counter64; + description + "Number of state changes for the label switched path"; + } + + leaf online-time { + type oc-types:timeticks64; + description + "Indication of the time the label switched path + transitioned to an Oper Up or in-service state. + + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf current-path-time { + type oc-types:timeticks64; + description + "Indicates the time the LSP switched onto its + current path. The value is reset upon a LSP path + change. + + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + + } + + leaf next-reoptimization-time { + type oc-types:timeticks64; + description + "Indicates the next scheduled time the LSP + will be reoptimized. + + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + + } + } + } + + grouping te-tunnel-bandwidth-config { + description + "Configuration parameters related to bandwidth for a tunnel"; + + leaf specification-type { + type te-bandwidth-type; + default SPECIFIED; + description + "The method used for settign the bandwidth, either explicitly + specified or configured"; + } + + leaf set-bandwidth { + when "../specification-type = 'SPECIFIED'" { + description + "The bandwidth value when bandwidth is explicitly + specified"; + } + type oc-mplst:bandwidth-kbps; + description + "set bandwidth explicitly, e.g., using + offline calculation"; + } + } + + grouping te-tunnel-bandwidth-state { + description + "Operational state parameters relating to bandwidth for a tunnel"; + + leaf signaled-bandwidth { + type oc-mplst:bandwidth-kbps; + description + "The currently signaled bandwidth of the LSP. In the case where + the bandwidth is specified explicitly, then this will match the + value of the set-bandwidth leaf; in cases where the bandwidth is + dynamically computed by the system, the current value of the + bandwidth should be reflected."; + } + } + + grouping te-tunnel-bandwidth-top { + description + "Top level grouping for specifying bandwidth for a tunnel"; + + container bandwidth { + description + "Bandwidth configuration for TE LSPs"; + + container config { + description + "Configuration parameters related to bandwidth on TE + tunnels:"; + uses te-tunnel-bandwidth-config; + } + + container state { + config false; + description + "State parameters related to bandwidth + configuration of TE tunnels"; + uses te-tunnel-bandwidth-config; + uses te-tunnel-bandwidth-state; + } + + container auto-bandwidth { + when "../config/specification-type = 'AUTO'" { + description + "Include this container for auto bandwidth + specific configuration"; + } + description + "Parameters related to auto-bandwidth"; + + container config { + description + "Configuration parameters relating to MPLS + auto-bandwidth on the tunnel."; + uses te-lsp-auto-bandwidth-config; + } + + container state { + config false; + description + "State parameters relating to MPLS + auto-bandwidth on the tunnel."; + uses te-lsp-auto-bandwidth-config; + uses te-lsp-auto-bandwidth-state; + } + + container overflow { + description + "configuration of MPLS overflow bandwidth + adjustement for the LSP"; + + container config { + description + "Config information for MPLS overflow bandwidth + adjustment"; + uses te-lsp-overflow-config; + } + + container state { + config false; + description + "Config information for MPLS overflow bandwidth + adjustment"; + uses te-lsp-overflow-config; + } + } + + container underflow { + description + "configuration of MPLS underflow bandwidth + adjustement for the LSP"; + + container config { + description + "Config information for MPLS underflow bandwidth + adjustment"; + uses te-lsp-underflow-config; + } + + container state { + config false; + description + "State information for MPLS underflow bandwidth + adjustment"; + uses te-lsp-underflow-config; + } + } + } + } + } + + grouping p2p-path-candidate-secondary-path-config { + description + "Configuration parameters relating to a secondary path which + is a candidate for a particular primary path"; + + leaf secondary-path { + type leafref { + path "../../../../../../p2p-secondary-paths/" + + "p2p-secondary-path/config/name"; + } + description + "A reference to the secondary path that should be utilised + when the containing primary path option is in use"; + } + + leaf priority { + type uint16; + description + "The priority of the specified secondary path option. Higher + priority options are less preferable - such that a secondary + path reference with a priority of 0 is the most preferred"; + } + } + + grouping p2p-path-candidate-secondary-path-state { + description + "Operational state parameters relating to a secondary path + which is a candidate for a particular primary path"; + + leaf active { + type boolean; + description + "Indicates the current active path option that has + been selected of the candidate secondary paths"; + } + } + + grouping p2p-primary-paths-top { + description + "Top level grouping for p2p primary paths"; + + container p2p-primary-path { + description + "Primary paths associated with the LSP"; + + list p2p-primary-path { + key "name"; + description + "List of p2p primary paths for a tunnel"; + + leaf name { + type leafref { + path "../config/name"; + // Requires YANG 1.1 + //require-instance true; + } + description + "Path name"; + } + + container config { + description + "Configuration parameters related to paths"; + uses p2p-path-config; + } + + container state { + config false; + description + "State parameters related to paths"; + uses p2p-path-config; + uses p2p-path-state; + } + + container candidate-secondary-paths { + description + "The set of candidate secondary paths which may be used + for this primary path. When secondary paths are specified + in the list the path of the secondary LSP in use must be + restricted to those path options referenced. The + priority of the secondary paths is specified within the + list. Higher priority values are less preferred - that is + to say that a path with priority 0 is the most preferred + path. In the case that the list is empty, any secondary + path option may be utilised when the current primary path + is in use."; + + list candidate-secondary-path { + key "secondary-path"; + + description + "List of secondary paths which may be utilised when the + current primary path is in use"; + + leaf secondary-path { + type leafref { + path "../config/secondary-path"; + } + description + "A reference to the secondary path option reference + which acts as the key of the candidate-secondary-path + list"; + } + + container config { + description + "Configuration parameters relating to the candidate + secondary path"; + + uses p2p-path-candidate-secondary-path-config; + } + + container state { + config false; + description + "Operational state parameters relating to the candidate + secondary path"; + + uses p2p-path-candidate-secondary-path-config; + uses p2p-path-candidate-secondary-path-state; + } + } + } + + uses te-path-placement-constraints-top; + + } + } + } + + grouping p2p-secondary-paths-top { + description + "Top level grouping for p2p secondary paths"; + + container p2p-secondary-paths { + description + "Secondary paths for the LSP"; + + list p2p-secondary-path { + key "name"; + description + "List of p2p primary paths for a tunnel"; + + leaf name { + type leafref { + path "../config/name"; + // Requires YANG 1.1 + //require-instance true; + } + description + "Path name"; + } + + container config { + description + "Configuration parameters related to paths"; + uses p2p-path-config; + } + + container state { + config false; + description + "State parameters related to paths"; + uses p2p-path-config; + uses p2p-path-state; + } + + uses te-path-placement-constraints-top; + } + } + } + + grouping te-tunnels-top { + description + "Top level grouping for TE tunnels"; + + container tunnels { + description + "Enclosing container for tunnels"; + list tunnel { + key "name"; + description + "List of TE tunnels. This list contains only the LSPs that the + current device originates (i.e., for which it is the head-end). + Where the signaling protocol utilised for an LSP allows a mid-point + or tail device to be aware of the LSP (e.g., RSVP-TE), then the + associated sessions are maintained per protocol"; + + leaf name { + type leafref { + path "../config/name"; + // Requires YANG 1.1 + //require-instance true; + } + description + "The tunnel name"; + } + + container config { + description + "Configuration parameters related to TE tunnels:"; + uses te-global-tunnel-config; + } + + container state { + config false; + description + "State parameters related to TE tunnels"; + uses te-global-tunnel-config; + uses te-tunnel-state; + + } + + uses te-tunnel-bandwidth-top; + uses te-tunnel-p2p-top; + // TODO - add the p2mp configuration + } + } + } + +// data definition statements + +// augment statements + +// rpc statements + +// notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls-types.yang b/src/plugins/yang/openconfig/openconfig-mpls-types.yang new file mode 100644 index 0000000..18d3816 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls-types.yang @@ -0,0 +1,426 @@ +module openconfig-mpls-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/mpls-types"; + + prefix "oc-mpls-types"; + + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "General types for MPLS / TE data model"; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + // identity statements + + identity PATH_COMPUTATION_METHOD { + description + "base identity for supported path computation + mechanisms"; + } + + identity LOCALLY_COMPUTED { + base PATH_COMPUTATION_METHOD; + description + "indicates a constrained-path LSP in which the + path is computed by the local LER"; + } + + identity EXTERNALLY_QUERIED { + base PATH_COMPUTATION_METHOD; + description + "Constrained-path LSP in which the path is + obtained by querying an external source, such as a PCE server. + In the case that an LSP is defined to be externally queried, it may + also have associated explicit definitions (which are provided to the + external source to aid computation); and the path that is returned by + the external source is not required to provide a wholly resolved + path back to the originating system - that is to say, some local + computation may also be required"; + } + + identity EXPLICITLY_DEFINED { + base PATH_COMPUTATION_METHOD; + description + "constrained-path LSP in which the path is + explicitly specified as a collection of strict or/and loose + hops"; + } + + + // using identities rather than enum types to simplify adding new + // signaling protocols as they are introduced and supported + identity PATH_SETUP_PROTOCOL { + description + "base identity for supported MPLS signaling + protocols"; + } + + identity PATH_SETUP_RSVP { + base PATH_SETUP_PROTOCOL; + description + "RSVP-TE signaling protocol"; + } + + identity PATH_SETUP_SR { + base PATH_SETUP_PROTOCOL; + description + "Segment routing"; + } + + identity PATH_SETUP_LDP { + base PATH_SETUP_PROTOCOL; + description + "LDP - RFC 5036"; + } + + + identity PROTECTION_TYPE { + description + "base identity for protection type"; + } + + identity UNPROTECTED { + base PROTECTION_TYPE; + description + "no protection is desired"; + } + + identity LINK_PROTECTION_REQUIRED { + base PROTECTION_TYPE; + description + "link protection is desired"; + } + + identity LINK_NODE_PROTECTION_REQUESTED { + base PROTECTION_TYPE; + description + "node and link protection are both desired"; + } + + identity LSP_ROLE { + description + "Base identity for describing the role of + label switched path at the current node"; + } + + identity INGRESS { + base LSP_ROLE; + description + "Label switched path is an ingress (headend) + LSP"; + } + + identity EGRESS { + base LSP_ROLE; + description + "Label switched path is an egress (tailend) + LSP"; + } + + identity TRANSIT { + base LSP_ROLE; + description + "Label switched path is a transit LSP"; + } + + + identity TUNNEL_TYPE { + description + "Base identity from which specific tunnel types are + derived."; + } + + identity P2P { + base TUNNEL_TYPE; + description + "TE point-to-point tunnel type."; + } + + identity P2MP { + base TUNNEL_TYPE; + description + "TE point-to-multipoint tunnel type."; + } + + + identity LSP_OPER_STATUS { + description + "Base identity for LSP operational status"; + } + + identity DOWN { + base LSP_OPER_STATUS; + description + "LSP is operationally down or out of service"; + } + + identity UP { + base LSP_OPER_STATUS; + description + "LSP is operationally active and available + for traffic."; + } + + identity TUNNEL_ADMIN_STATUS { + description + "Base identity for tunnel administrative status"; + } + + identity ADMIN_DOWN { + base TUNNEL_ADMIN_STATUS; + description + "LSP is administratively down"; + } + + identity ADMIN_UP { + base TUNNEL_ADMIN_STATUS; + description + "LSP is administratively up"; + } + + identity NULL_LABEL_TYPE { + description + "Base identity from which specific null-label types are + derived."; + } + + identity EXPLICIT { + base NULL_LABEL_TYPE; + description + "Explicit null label is used."; + } + + identity IMPLICIT { + base NULL_LABEL_TYPE; + description + "Implicit null label is used."; + } + + identity LSP_METRIC_TYPE { + description + "Base identity for types of LSP metric specification"; + } + + identity LSP_METRIC_RELATIVE { + base LSP_METRIC_TYPE; + description + "The metric specified for the LSPs to which this identity refers + is specified as a relative value to the IGP metric cost to the + LSP's tail-end."; + } + + identity LSP_METRIC_ABSOLUTE { + base LSP_METRIC_TYPE; + description + "The metric specified for the LSPs to which this identity refers + is specified as an absolute value"; + } + + identity LSP_METRIC_INHERITED { + base LSP_METRIC_TYPE; + description + "The metric for for the LSPs to which this identity refers is + not specified explicitly - but rather inherited from the IGP + cost directly"; + } + + // typedef statements + typedef mpls-label { + type union { + type uint32 { + range 16..1048575; + } + type enumeration { + enum IPV4_EXPLICIT_NULL { + value 0; + description + "valid at the bottom of the label stack, + indicates that stack must be popped and packet forwarded + based on IPv4 header"; + } + enum ROUTER_ALERT { + value 1; + description + "allowed anywhere in the label stack except + the bottom, local router delivers packet to the local CPU + when this label is at the top of the stack"; + } + enum IPV6_EXPLICIT_NULL { + value 2; + description + "valid at the bottom of the label stack, + indicates that stack must be popped and packet forwarded + based on IPv6 header"; + } + enum IMPLICIT_NULL { + value 3; + description + "assigned by local LSR but not carried in + packets"; + } + enum ENTROPY_LABEL_INDICATOR { + value 7; + description + "Entropy label indicator, to allow an LSR + to distinguish between entropy label and applicaiton + labels RFC 6790"; + } + enum NO_LABEL { + description + "This value is utilised to indicate that the packet that + is forwarded by the local system does not have an MPLS + header applied to it. Typically, this is used at the + egress of an LSP"; + } + } + } + description + "type for MPLS label value encoding"; + reference "RFC 3032 - MPLS Label Stack Encoding"; + } + + typedef tunnel-type { + type enumeration { + enum P2P { + description + "point-to-point label-switched-path"; + } + enum P2MP { + description + "point-to-multipoint label-switched-path"; + } + enum MP2MP { + description + "multipoint-to-multipoint label-switched-path"; + } + } + description + "defines the tunnel type for the LSP"; + reference + "RFC 6388 - Label Distribution Protocol Extensions for + Point-to-Multipoint and Multipoint-to-Multipoint Label Switched + Paths + RFC 4875 - Extensions to Resource Reservation Protocol + - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE + Label Switched Paths (LSPs)"; + } + + typedef bandwidth-kbps { + type uint64; + units "Kbps"; + description + "Bandwidth values expressed in kilobits per second"; + } + + typedef bandwidth-mbps { + type uint64; + units "Mbps"; + description + "Bandwidth values expressed in megabits per second"; + } + + typedef bandwidth-gbps { + type uint64; + units "Gbps"; + description + "Bandwidth values expressed in gigabits per second"; + } + + typedef mpls-tc { + type uint8 { + range "0..7"; + } + description + "Values of the MPLS Traffic Class (formerly known as + Experimental, EXP) bits"; + } + + // grouping statements + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-mpls.yang b/src/plugins/yang/openconfig/openconfig-mpls.yang new file mode 100644 index 0000000..e6bdf96 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-mpls.yang @@ -0,0 +1,746 @@ +module openconfig-mpls { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/mpls"; + + prefix "oc-mpls"; + + + // import some basic types + import openconfig-mpls-types { prefix oc-mplst; } + import openconfig-mpls-rsvp { prefix oc-rsvp; } + import openconfig-mpls-ldp { prefix oc-ldp; } + import openconfig-types { prefix oc-types; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-segment-routing { prefix oc-sr; } + + // include submodules + include openconfig-mpls-te; + include openconfig-mpls-igp; + include openconfig-mpls-static; + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module provides data definitions for configuration of + Multiprotocol Label Switching (MPLS) and associated protocols for + signaling and traffic engineering. + + RFC 3031: Multiprotocol Label Switching Architecture + + The MPLS / TE data model consists of several modules and + submodules as shown below. The top-level MPLS module describes + the overall framework. Three types of LSPs are supported: + + i) traffic-engineered (or constrained-path) + + ii) IGP-congruent (LSPs that follow the IGP path) + + iii) static LSPs which are not signaled + + The structure of each of these LSP configurations is defined in + corresponding submodules. Companion modules define the relevant + configuration and operational data specific to key signaling + protocols used in operational practice. + + + +-------+ + +---------------->| MPLS |<--------------+ + | +-------+ | + | ^ | + | | | + +----+-----+ +--------+-------+ +-----+-----+ + | TE LSPs | | IGP-based LSPs | |static LSPs| + | | | | | | + +----------+ +----------------+ +-----------+ + ^ ^ ^ ^ + | +----------------+ | +--------+ + | | | | + | +------+ +-+---+-+ +--+--+ + +---+ RSVP | |SEGMENT| | LDP | + +------+ |ROUTING| +-----+ + +-------+ + "; + + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-07-02" { + description + "Add new RSVP-TE statistics, remove associated-rsvp-session + leaf. Remove use of date-and-time."; + reference "3.0.0"; + } + + revision "2018-06-16" { + description + "Included attributes for base LDP configuration."; + reference "2.6.0"; + } + + revision "2018-06-13" { + description + "Add ttl-propagation to global MPLS config"; + reference "2.5.0"; + } + + revision "2018-06-05" { + description + "Fixed bugs in when statements on RSVP-TE attributes"; + reference "2.4.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "2.4.1"; + } + + revision "2017-06-21" { + description + "Add TC bits typedef."; + reference "2.4.0"; + } + + revision "2017-03-22" { + description + "Add RSVP calculated-absolute-subscription-bw"; + reference "2.3.0"; + } + + revision "2017-01-26" { + description + "Add RSVP Tspec, clarify units for RSVP, remove unused LDP"; + reference "2.2.0"; + } + + revision "2016-12-15" { + description + "Add additional MPLS parameters"; + reference "2.1.0"; + } + + revision "2016-09-01" { + description + "Revisions based on implementation feedback"; + reference "2.0.0"; + } + + revision "2016-08-08" { + description + "Public release of MPLS models"; + reference "1.0.1"; + } + + + // grouping statements + + grouping mpls-admin-group-config { + description + "configuration data for MPLS link admin groups"; + + leaf admin-group-name { + type string; + description + "name for mpls admin-group"; + } + + leaf bit-position { + type uint32; + description + "bit-position value for mpls admin-group. The value + for the admin group is an integer that represents one + of the bit positions in the admin-group bitmask. Values + between 0 and 31 are interpreted as the original limit + of 32 admin groups. Values >=32 are interpreted as + extended admin group values as per RFC7308."; + } + + } + + grouping mpls-admin-groups-top { + + description + "top-level mpls admin-groups config + and state containers"; + + container mpls-admin-groups { + description + "Top-level container for admin-groups configuration + and state"; + + list admin-group { + key "admin-group-name"; + description + "configuration of value to name mapping + for mpls affinities/admin-groups"; + + leaf admin-group-name { + type leafref { + path "../config/admin-group-name"; + } + description + "name for mpls admin-group"; + } + container config { + description + "Configurable items for admin-groups"; + uses mpls-admin-group-config; + } + + container state { + config false; + description + "Operational state for admin-groups"; + uses mpls-admin-group-config; + } + } + } + } + + grouping mpls-te-igp-flooding-bandwidth-config { + description + "Configurable items for igp flooding bandwidth + threshold configuration."; + leaf threshold-type { + type enumeration { + enum DELTA { + description + "DELTA indicates that the local + system should flood IGP updates when a + change in reserved bandwidth >= the specified + delta occurs on the interface."; + } + enum THRESHOLD_CROSSED { + description + "THRESHOLD-CROSSED indicates that + the local system should trigger an update (and + hence flood) the reserved bandwidth when the + reserved bandwidth changes such that it crosses, + or becomes equal to one of the threshold values."; + } + } + description + "The type of threshold that should be used to specify the + values at which bandwidth is flooded. DELTA indicates that + the local system should flood IGP updates when a change in + reserved bandwidth >= the specified delta occurs on the + interface. Where THRESHOLD_CROSSED is specified, the local + system should trigger an update (and hence flood) the + reserved bandwidth when the reserved bandwidth changes such + that it crosses, or becomes equal to one of the threshold + values"; + } + + leaf delta-percentage { + when "../threshold-type = 'DELTA'" { + description + "The percentage delta can only be specified when the + threshold type is specified to be a percentage delta of + the reserved bandwidth"; + } + type oc-types:percentage; + description + "The percentage of the maximum-reservable-bandwidth + considered as the delta that results in an IGP update + being flooded"; + } + + leaf threshold-specification { + when "../threshold-type = 'THRESHOLD_CROSSED'" { + description + "The selection of whether mirrored or separate threshold + values are to be used requires user specified thresholds to + be set"; + } + type enumeration { + enum MIRRORED_UP_DOWN { + description + "MIRRORED_UP_DOWN indicates that a single set of + threshold values should be used for both increasing + and decreasing bandwidth when determining whether + to trigger updated bandwidth values to be flooded + in the IGP TE extensions."; + } + enum SEPARATE_UP_DOWN { + description + "SEPARATE_UP_DOWN indicates that a separate + threshold values should be used for the increasing + and decreasing bandwidth when determining whether + to trigger updated bandwidth values to be flooded + in the IGP TE extensions."; + } + } + description + "This value specifies whether a single set of threshold + values should be used for both increasing and decreasing + bandwidth when determining whether to trigger updated + bandwidth values to be flooded in the IGP TE extensions. + MIRRORED-UP-DOWN indicates that a single value (or set of + values) should be used for both increasing and decreasing + values, where SEPARATE-UP-DOWN specifies that the increasing + and decreasing values will be separately specified"; + } + + leaf-list up-thresholds { + when "../threshold-type = 'THRESHOLD_CROSSED'" + + "and ../threshold-specification = 'SEPARATE_UP_DOWN'" { + description + "A list of up-thresholds can only be specified when the + bandwidth update is triggered based on crossing a + threshold and separate up and down thresholds are + required"; + } + type oc-types:percentage; + description + "The thresholds (expressed as a percentage of the maximum + reservable bandwidth) at which bandwidth updates are to be + triggered when the bandwidth is increasing."; + } + + leaf-list down-thresholds { + when "../threshold-type = 'THRESHOLD_CROSSED'" + + "and ../threshold-specification = 'SEPARATE_UP_DOWN'" { + description + "A list of down-thresholds can only be specified when the + bandwidth update is triggered based on crossing a + threshold and separate up and down thresholds are + required"; + } + type oc-types:percentage; + description + "The thresholds (expressed as a percentage of the maximum + reservable bandwidth) at which bandwidth updates are to be + triggered when the bandwidth is decreasing."; + } + + leaf-list up-down-thresholds { + when "../threshold-type = 'THRESHOLD_CROSSED'" + + "and ../threshold-specification = 'MIRRORED_UP_DOWN'" { + description + "A list of thresholds corresponding to both increasing + and decreasing bandwidths can be specified only when an + update is triggered based on crossing a threshold, and + the same up and down thresholds are required."; + } + type oc-types:percentage; + description + "The thresholds (expressed as a percentage of the maximum + reservable bandwidth of the interface) at which bandwidth + updates are flooded - used both when the bandwidth is + increasing and decreasing"; + } + } + + + grouping mpls-te-igp-flooding-bandwidth { + description + "Top level group for traffic engineering + database flooding options"; + container igp-flooding-bandwidth { + description + "Interface bandwidth change percentages + that trigger update events into the IGP traffic + engineering database (TED)"; + container config { + description + "Configuration parameters for TED + update threshold "; + uses mpls-te-igp-flooding-bandwidth-config; + } + container state { + config false; + description + "State parameters for TED update threshold "; + uses mpls-te-igp-flooding-bandwidth-config; + } + } + } + + + grouping te-lsp-delay-config { + description + "Group for the timers goerning the delay + in installation and cleanup of TE LSPs"; + + leaf install-delay { + type uint16 { + range 0..3600; + } + units seconds; + description + "delay the use of newly installed te lsp for a + specified amount of time."; + } + + leaf cleanup-delay { + type uint16; + units seconds; + description + "delay the removal of old te lsp for a specified + amount of time"; + } + } + + grouping te-interface-attributes-top { + description + "Top level grouping for attributes + for TE interfaces."; + + list interface { + key "interface-id"; + description + "List of TE interfaces"; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "Reference to the interface id list key"; + } + + container config { + description + "Configuration parameters related to TE interfaces:"; + uses te-interface-attributes-config; + } + + container state { + config false; + description + "State parameters related to TE interfaces"; + uses te-interface-attributes-config; + } + + uses oc-if:interface-ref; + + uses mpls-te-igp-flooding-bandwidth; + } + } + + grouping te-interface-attributes-config { + description + "global level definitions for interfaces + on which TE is run"; + + leaf interface-id { + type oc-if:interface-id; + description + "Id of the interface"; + } + + leaf te-metric { + type uint32; + description + "TE specific metric for the link"; + } + + leaf-list srlg-membership { + type leafref { + path "../../../../te-global-attributes/srlgs/srlg/name"; + } + description + "list of references to named shared risk link groups that the + interface belongs to."; + } + + leaf-list admin-group { + type string; + description + "list of admin groups (by name) on the interface"; + } + } + + grouping mpls-te-lsp-timers { + description + "Grouping for traffic engineering timers"; + container te-lsp-timers { + description + "Definition for delays associated with setup + and cleanup of TE LSPs"; + + container config { + description + "Configuration parameters related + to timers for TE LSPs"; + + uses te-lsp-delay-config; + uses te-tunnel-reoptimize-config; + } + + container state { + config false; + description + "State related to timers for TE LSPs"; + + uses te-lsp-delay-config; + uses te-tunnel-reoptimize-config; + } + } + } + + grouping mpls-global-config { + description + "Definition of global MPLS configuration parameters"; + + leaf null-label { + type identityref { + base oc-mplst:NULL_LABEL_TYPE; + } + default oc-mplst:IMPLICIT; + description + "The null-label type used, implicit or explicit"; + } + + leaf ttl-propagation { + type boolean; + default true; + description + "Enables TTL propagation across the MPLS domain. + When ttl-propagation is set to true, the IP TTL + is copied into the MPLS header TTL when pushing + a label to an IP packet. If false, the IP TTL is + not copied into the MPLS header TTL and, therefore, + the IP TTL is not updated in the MPLS domain."; + } + + } + + grouping mpls-global-top { + description + "Top level grouping for global MPLS configuration "; + + container config { + description + "Top level global MPLS configuration"; + uses mpls-global-config; + } + + container state { + config false; + description + "Top level global MPLS state"; + uses mpls-global-config; + } + } + + grouping mpls-interfaces-top { + description + "Top level grouping for attributes + for MPLS-enabled interfaces."; + container interface-attributes { + description + "Parameters related to MPLS interfaces"; + list interface { + key "interface-id"; + description + "List of TE interfaces"; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "Reference to the interface id list key"; + } + + container config { + description + "Configuration parameters related to MPLS interfaces:"; + uses mpls-interface-attributes-config; + } + + container state { + config false; + description + "State parameters related to TE interfaces"; + uses mpls-interface-attributes-config; + } + + uses oc-if:interface-ref; + } + } + } + + grouping mpls-interface-attributes-config { + description + "global level definitions for interfaces + on which MPLS is run"; + + leaf interface-id { + type oc-if:interface-id; + description + "Indentifier for the MPLS interface"; + } + + leaf mpls-enabled { + type boolean; + default false; + description + "Enable MPLS forwarding on this interface"; + } + } + + grouping mpls-label-block-config { + description + "Configuration parameters relating to an MPLS label block."; + + leaf local-id { + type string; + description + "A local identifier for the global label block allocation."; + } + + leaf lower-bound { + type oc-mplst:mpls-label; + description + "Lower bound of the global label block. The block is defined to include + this label."; + } + + leaf upper-bound { + type oc-mplst:mpls-label; + description + "Upper bound for the global label block. The block is defined to include + this label."; + } + } + + grouping mpls-label-blocks-top { + description + "Top-level configuration and operational state parameters corresponding + to reserved label blocks."; + + container reserved-label-blocks { + description + "A range of labels starting with the start-label and up-to and including + the end label that should be allocated as reserved. These labels should + not be utilised by any dynamic label allocation on the local system unless + the allocating protocol is explicitly configured to specify that + allocation of labels should be out of the label block specified."; + + list reserved-label-block { + key "local-id"; + + description + "A range of labels starting with the start-label up to and including + the end label that should be allocated for use by a specific protocol."; + + leaf local-id { + type leafref { + path "../config/local-id"; + } + description + "A reference to a unique local identifier for this label block."; + } + + container config { + description + "Configuration parameters relating to the label block."; + + uses mpls-label-block-config; + } + + container state { + config false; + description + "State parameters relating to the label block."; + + uses mpls-label-block-config; + } + } + } + } + + grouping mpls-top { + description + "Top level grouping for MPLS configuration and state"; + + container mpls { + description + "Anchor point for mpls configuration and operational + data"; + + container global { + // entropy label support, label ranges will be added here. + description + "general mpls configuration applicable to any + type of LSP and signaling protocol - label ranges, + entropy label supportmay be added here"; + uses mpls-global-top; + uses mpls-interfaces-top; + uses mpls-label-blocks-top; + } + + container te-global-attributes { + description + "traffic-engineering global attributes"; + uses mpls-te-srlg-top; + uses mpls-admin-groups-top; + uses mpls-te-lsp-timers; + } + + container te-interface-attributes { + description + "traffic engineering attributes specific + for interfaces"; + uses te-interface-attributes-top; + } + + container signaling-protocols { + description + "top-level signaling protocol configuration"; + + uses oc-rsvp:rsvp-global; + uses oc-ldp:ldp-global; + uses oc-sr:sr-mpls-top; + } + + container lsps { + description + "LSP definitions and configuration"; + + container constrained-path { + description + "traffic-engineered LSPs supporting different + path computation and signaling methods"; + uses explicit-paths-top; + uses te-tunnels-top; + } + + container unconstrained-path { + description + "LSPs that use the IGP-determined path, i.e., non + traffic-engineered, or non constrained-path"; + + uses igp-lsp-common; + uses igp-lsp-setup; + } + + container static-lsps { + description + "statically configured LSPs, without dynamic + signaling"; + + uses static-lsp-top; + } + } + } + } + + // augment statements + + // rpc statements + + // notification statements +} diff --git a/src/plugins/yang/openconfig/openconfig-network-instance-l2.yang b/src/plugins/yang/openconfig/openconfig-network-instance-l2.yang new file mode 100644 index 0000000..530b8c8 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-network-instance-l2.yang @@ -0,0 +1,339 @@ +submodule openconfig-network-instance-l2 { + + belongs-to openconfig-network-instance { + prefix "oc-netinst"; + } + + // import some basic types + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-interfaces { prefix "oc-if"; } + import ietf-yang-types { prefix "yang"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains groupings which specifically relate to + Layer 2 network instance configuration and operational state + parameters."; + + oc-ext:openconfig-version "0.11.0"; + + revision "2018-08-11" { + description + "Add vlan id as additional key in MAC table"; + reference "0.11.0"; + } + + revision "2018-06-22" { + description + "Fix typo in OSPF when statement"; + reference "0.10.2"; + } + + revision "2018-06-05" { + description + "Fix bugs in when statements"; + reference "0.10.1"; + } + + revision "2018-02-19" { + description + "Add PIM and IGMP to network instance"; + reference "0.10.0"; + } + + revision "2017-12-13" { + description + "Fix incorrect constraint on SR and MPLS containers"; + reference "0.9.0"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes"; + reference "0.8.1"; + } + + revision "2017-02-28" { + description + "Add OSPFv2 to network instance"; + reference "0.8.0"; + } + + revision "2017-01-26" { + description + "Add policy forwarding to network instance"; + reference "0.7.0"; + } + + revision "2017-01-13" { + description + "Add AFT to the network instance"; + reference "0.6.0"; + } + + revision "2016-12-15" { + description + "Add segment routing to network instance"; + reference "0.5.0"; + } + + revision "2016-11-10" { + description + "Update model to include IS-IS."; + reference "0.4.1"; + } + + revision "2016-10-12" { + description + "Update table connections"; + reference "0.4.0"; + } + + revision "2016-09-28" { + description + "Change L2 instance to submodule; add MAC table"; + reference "0.3.0"; + } + + revision "2016-08-11" { + description + "Resolve repeated container names in routing protocols"; + reference "0.2.3"; + } + + revision "2016-07-08" { + description + "Updated with refactored routing protocol models"; + reference "0.2.1"; + } + + revision "2016-03-29" { + description + "Initial revision"; + reference "0.2.0"; + } + + revision "2015-11-20" { + description + "Initial revision"; + reference "0.1.0"; + } + + grouping l2ni-instance { + description + "Configuration and operational state parameters relating + to a Layer 2 network instance"; + + container fdb { + description + "Operational state and configuration parameters relating to + the forwarding database of the network instance"; + + container config { + description + "Configuration parameters relating to the FDB"; + uses l2ni-fdb-mac-config; + } + container state { + config false; + description + "Operational state parameters relating to the FDB"; + uses l2ni-fdb-mac-config; + } + + uses l2ni-mac-table-top; + } + } + + grouping l2ni-instance-common-config { + description + "Common configuration options which are specific to Layer 2 + network instances"; + + leaf mtu { + type uint16; + description + "The maximum frame size which should be supported for this + instance for Layer 2 frames"; + } + + } + + grouping l2ni-fdb-mac-config { + description + "Parameters relating to FDB behaviour relating to MAC + addresses"; + + leaf mac-learning { + type boolean; + description + "When this leaf is set to true, MAC learning is enabled for + the network instance, such that MAC addresses are learned + from ingress frames and added to the FDB."; + } + + leaf mac-aging-time { + // Cisco supports one aging time for local and remote, but + // can specify this time is absolute or against inactivity. + // ALU SROS supports different aging times for local and remote + // but does not allow absolute/inactivity specification. + // JNPR supports only a single aging time, and no specification + // of whether inactivity/absolute is used. + // It is easy to augment new options in here for local remote + // and an extra leaf to allow specification of the type of aging + // so this is left as a single value. + type uint16; + units seconds; + description + "The number of seconds of inactivity after which the entry + in the local FDB is timed out."; + } + + leaf maximum-entries { + type uint16; + description + "The maximum number of MAC address entries that should be + accepted into the FDB"; + } + } + + grouping l2ni-encapsulation-config { + description + "Encapsulation related configuration parameters for a L2 + network instance"; + + leaf control-word { + type boolean; + description + "Whether the control-word should be used for the network + instance"; + reference "RFC3985"; + } + } + + grouping l2ni-mac-table-config { + description + "Configuration data for MAC table entries"; + + leaf mac-address { + type yang:mac-address; + description + "MAC address for the dynamic or static MAC table + entry"; + } + + leaf vlan { + //TODO(aashaikh): Consider whether this should just reflect the + //VLAN id or be a union type to also support displaying/setting + //the VLAN by name (i.e., global VLAN configured in the VLAN + // model). + type leafref { + path "../../../../../../vlans/vlan/config/vlan-id"; + } + description + "VLAN on which the MAC address is present. The same MAC + address may be seen on multiple VLANs in some cases."; + } + } + + grouping l2ni-mac-table-state { + description + "Operational state data for MAC table entries"; + + leaf age { + type uint64; + units seconds; + description + "The time in seconds since the MAC address has been in the + table"; + } + + leaf entry-type { + type enumeration { + enum STATIC { + description + "Statically programmed MAC table entry"; + } + enum DYNAMIC { + description + "Dynamically learned MAC table entry"; + } + } + description + "Indicates whether the entry was statically configured, or + dynamically learned."; + } + + } + + grouping l2ni-mac-table-top { + description + "Top-level grouping for MAC table list"; + + + container mac-table { + description + "Table of learned or statically configured MAC addresses and + corresponding VLANs in the bridge domain"; + + container entries { + description + "Enclosing container for list of MAC table entries"; + + list entry { + key "mac-address vlan"; + description + "List of learned MAC addresses"; + + leaf mac-address { + type leafref { + path "../config/mac-address"; + } + description + "Reference to mac-address list key"; + } + + leaf vlan { + type leafref { + path "../config/vlan"; + } + description + "Reference to vlan list key"; + } + + container config { + description + "Configuration data for MAC table entries"; + + uses l2ni-mac-table-config; + } + + container state { + + config false; + + description + "Operational state data for MAC table entries"; + + uses l2ni-mac-table-config; + uses l2ni-mac-table-state; + } + + container interface { + description + "Reference to the base and/or subinterface for the + MAC table entry"; + + uses oc-if:interface-ref; + } + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-network-instance-l3.yang b/src/plugins/yang/openconfig/openconfig-network-instance-l3.yang new file mode 100644 index 0000000..d9dca40 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-network-instance-l3.yang @@ -0,0 +1,234 @@ +module openconfig-network-instance-l3 { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/network-instance-l3"; + + prefix "oc-ni-l3"; + + // import some basic types + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-types { prefix "octypes"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains groupings which specifically relate to + Layer 3 network instance configuration and operational state + parameters."; + + oc-ext:openconfig-version "0.11.0"; + + revision "2018-08-17" { + description + "Add a route limit for L3 network instances."; + reference "0.11.0"; + } + + revision "2017-12-13" { + description + "Fix incorrect constraint on SR and MPLS containers"; + reference "0.9.0"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes"; + reference "0.8.1"; + } + + revision "2017-02-28" { + description + "Add OSPFv2 to network instance"; + reference "0.8.0"; + } + + revision "2017-01-26" { + description + "Add policy forwarding to network instance"; + reference "0.7.0"; + } + + revision "2017-01-13" { + description + "Add AFT to the network instance"; + reference "0.6.0"; + } + + revision "2016-12-15" { + description + "Add segment routing to network instance"; + reference "0.5.0"; + } + + revision "2016-11-10" { + description + "Update model to include IS-IS."; + reference "0.4.1"; + } + + revision "2016-09-28" { + description + "Change L2 instance to submodule; add MAC table"; + reference "0.3.0"; + } + + revision "2016-08-11" { + description + "Resolve repeated container names in routing protocols"; + reference "0.2.3"; + } + + revision "2016-07-08" { + description + "Updated with refactored routing protocol models"; + reference "0.2.1"; + } + + revision "2016-03-29" { + description + "Initial revision"; + reference "0.2.0"; + } + + revision "2016-03-14" { + description + "Initial revision"; + reference "0.1.0"; + } + + grouping l3ni-instance { + description + "Configuration and operational state parameters relevant + to network instances that include a Layer 3 type"; + + } + + grouping l3ni-instance-common-config { + description + "Configuration parameters that are common to L3 network + instances other than the default instance"; + + leaf-list enabled-address-families { + type identityref { + base octypes:ADDRESS_FAMILY; + } + description + "The address families that are to be enabled for this + network instance."; + } + } + + grouping l3ni-route-limit-structural { + description + "Configuration and state for the maximum number of routes + that should be used by routing instance."; + + container route-limits { + description + "Configuration and operational state relating to the + maximum number of routes for the address family that + should be allowed within the Layer 3 network instance. + + When the specified value is reached, no further prefixes + should be installed into the system's RIB from this network + instance unless the warning only leaf is set. In this case, + new routes should still be installed. If a alarm threshold + is specified, then this should be used to generate + alarms via telemetry for the network instance."; + + list route-limit { + key "afi"; + + description + "A route limit applying to a particular address family."; + + leaf afi { + type leafref { + path "../config/afi"; + } + description + "Reference to the address family for which the route + limit is being applied."; + } + + container config { + description + "Configuration options relating to the route limit."; + uses l3ni-route-limit-config; + } + + container state { + config false; + description + "Operational state parameters relating to the route limit."; + uses l3ni-route-limit-config; + uses l3ni-route-limit-state; + } + } + } + } + + grouping l3ni-route-limit-config { + description + "Configuration options relating to the route limit for a network + instance."; + + leaf afi { + type identityref { + base octypes:ADDRESS_FAMILY; + } + description + "The address family for which the route limit applies."; + } + + leaf maximum { + type uint32; + description + "The maximum number of routes for the address family. The + system should not install more than maximum number of + prefixes into the RIB unless the warning-only leaf is specified."; + } + + leaf warning-only { + type boolean; + default false; + description + "When specified, the route limit specified is considered only as + a warning - and routes should continue to be installed into the + RIB over the limit specified in the maximum leaf."; + } + + leaf alarm-threshold { + type uint32; + description + "When specified, an alarm should be generated when the threshold + number of installed routes is reached."; + } + } + + grouping l3ni-route-limit-state { + description + "Operational state relating to the route limit for a network + instance."; + + leaf threshold-exceeded { + type boolean; + description + "This leaf should be set to true in the case that the threshold + number of routes has been exceeded."; + } + + leaf installed-routes { + type uint32; + description + "The current number of routes installed for the address family."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-network-instance-policy.yang b/src/plugins/yang/openconfig/openconfig-network-instance-policy.yang new file mode 100644 index 0000000..afbcacd --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-network-instance-policy.yang @@ -0,0 +1,115 @@ +module openconfig-network-instance-policy { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/network-instance/policy"; + + prefix "oc-ni-pol"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-routing-policy { prefix oc-rpol; } + import openconfig-policy-types { prefix oc-pol-types; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines routing policy statements (conditions and + actions) for the network instance model. These statements are + generally added to the routing policy model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2017-02-15" { + description + "Initial revision"; + reference "0.1.0"; + } + + // grouping statements + + grouping protocol-instance-policy-config { + description + "Configuration data for policy matching on protocol instance"; + + leaf protocol-identifier { + type identityref { + base oc-pol-types:INSTALL_PROTOCOL_TYPE; + } + description + "The identifier (protocol type) of the + protocol instance to match on in the local network + instance."; + } + + leaf protocol-name { + type string; + description + "The name of the protocol instance to match + on in the local network instance"; + } + } + + grouping protocol-instance-policy-state { + description + "Operational state data for policy matching on protocol + instance"; + } + + grouping protocol-instance-policy-top { + description + "Top-level grouping for policy matching on protocol instance"; + + container match-protocol-instance { + description + "Top-level container for protocol instance match condition + in policy statements. The protocol instance is referenced + by an identifier and name"; + + container config { + description + "Configuration data for policy matching on protocol + instance"; + + uses protocol-instance-policy-config; + } + + container state { + + config false; + + description + "Operational state data for policy matching on protocol instance"; + + uses protocol-instance-policy-config; + uses protocol-instance-policy-state; + } + } + } + + // data definition statements + + // augment statements + + augment "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:statements/oc-rpol:statement/" + + "oc-rpol:conditions" { + description + "Add match conditions for protocol instances to the routing + policy model."; + + uses protocol-instance-policy-top; + } + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-network-instance-types.yang b/src/plugins/yang/openconfig/openconfig-network-instance-types.yang new file mode 100644 index 0000000..67ab357 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-network-instance-types.yang @@ -0,0 +1,261 @@ +module openconfig-network-instance-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/network-instance-types"; + + prefix "oc-ni-types"; + + import openconfig-extensions { prefix "oc-ext"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Types associated with a network instance"; + + oc-ext:openconfig-version "0.8.1"; + + revision "2017-08-24" { + description + "Minor formatting fixes"; + reference "0.8.1"; + } + + revision "2017-02-28" { + description + "Add OSPFv2 to network instance"; + reference "0.8.0"; + } + + revision "2017-01-26" { + description + "Add policy forwarding to network instance"; + reference "0.7.0"; + } + + revision "2017-01-13" { + description + "Add AFT to the network instance"; + reference "0.6.0"; + } + + revision "2016-12-15" { + description + "Add segment routing to network instance"; + reference "0.5.0"; + } + + revision "2016-11-10" { + description + "Update model to include IS-IS."; + reference "0.4.1"; + } + + revision "2016-10-12" { + description + "Update table connections"; + reference "0.4.0"; + } + + revision "2016-09-28" { + description + "Change L2 instance to submodule; add MAC table"; + reference "0.3.0"; + } + + revision "2016-08-11" { + description + "Resolve repeated container names in routing protocols"; + reference "0.2.3"; + } + + revision "2016-07-08" { + description + "Updated with refactored routing protocol models"; + reference "0.2.1"; + } + + revision "2016-03-29" { + description + "Initial revision"; + reference "0.2.0"; + } + + revision "2015-10-18" { + description + "Initial revision"; + reference "0.1.0"; + } + + // identity statements + identity NETWORK_INSTANCE_TYPE { + description + "A base identity which can be extended to indicate different + types of network instance supported by a device."; + } + + identity DEFAULT_INSTANCE { + base NETWORK_INSTANCE_TYPE; + description + "A special routing instance which acts as the 'default' or + 'global' routing instance for a network device."; + } + + identity L3VRF { + base NETWORK_INSTANCE_TYPE; + description + "A private Layer 3 only routing instance which is formed of + one or more RIBs"; + } + + identity L2VSI { + base NETWORK_INSTANCE_TYPE; + description + "A private Layer 2 only switch instance which is formed of + one or more L2 forwarding tables"; + } + + identity L2P2P { + base NETWORK_INSTANCE_TYPE; + description + "A private Layer 2 only forwarding instance which acts as + a point to point connection between two endpoints"; + } + + identity L2L3 { + base NETWORK_INSTANCE_TYPE; + description + "A private Layer 2 and Layer 2 forwarding instance"; + } + + identity ENDPOINT_TYPE { + description + "Specification of the type of endpoint that is being associated + with a network instance"; + } + + identity LOCAL { + base ENDPOINT_TYPE; + description + "A local interface which is being associated with the endpoint"; + } + + identity REMOTE { + base ENDPOINT_TYPE; + description + "A remote interface which is being associated with the + endpoint"; + } + + identity LABEL_ALLOCATION_MODE { + description + "Base identity to be used to express types of label allocation + strategies to be used within a network instance"; + } + + identity PER_PREFIX { + base LABEL_ALLOCATION_MODE; + description + "A label is to be allocated per prefix entry in the RIB for the + network instance"; + } + + identity PER_NEXTHOP { + base LABEL_ALLOCATION_MODE; + description + "A label is to be allocated per nexthop entry in the RIB for + the network instance"; + } + + identity INSTANCE_LABEL { + base LABEL_ALLOCATION_MODE; + description + "A single label is to be used for the instance"; + } + + identity ENCAPSULATION { + description + "On the wire encapsulations that can be used when + differentiating network instances"; + } + + identity MPLS { + base ENCAPSULATION; + description + "Use MPLS labels to distinguish network instances on the wire"; + } + + identity VXLAN { + base ENCAPSULATION; + description + "Use VXLAN (RFC7348) VNIs to distinguish network instances on + the wire"; + } + + identity SIGNALLING_PROTOCOL { + description + "The signalling protocol that should be used to diseminate + entries within a forwarding instance"; + } + + identity LDP { + base SIGNALLING_PROTOCOL; + description + "Use LDP-based setup for signalling. Where the instance is + a point-to-point service this refers to RFC4447 ('Martini') + setup. Where the service is an L2VSI, or L2L3 instance it + refers to RFC4762 LDP-signalled VPLS instances"; + } + + identity BGP_VPLS { + base SIGNALLING_PROTOCOL; + description + "Use BGP-based signalling and autodiscovery for VPLS instances + as per RFC4761"; + } + + identity BGP_EVPN { + base SIGNALLING_PROTOCOL; + description + "Use BGP-based Ethernet VPN (RFC7432) based signalling for + the network instance"; + } + + // rjs note: + // this should move to openconfig-types when merged + typedef route-distinguisher { + type union { + // type 0: <2-byte administrator>:<4-byte assigned number> + type string { + pattern '^(65[0-5][0-3][0-5]|[1-5][1-5][0-9][0-9][0-9]|' + + '[1-9]?[1-9]?[0-9][0-9]|[1-9]):' + + '(4[0-2][0-9][0-4][0-9][0-6][0-7][0-2][0-9][0-5]|' + + '[0-3][0-9]{9}|[1-9][0-9]{1,8}|[1-9])$'; + } + // type 1: :<2-byte assigned number> + type string { + pattern + '^(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}' + + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5]):' + + '(65[0-5][0-3][0-5]|[1-5][1-5][0-9][0-9][0-9]|' + + '[1-9]?[1-9]?[0-9][0-9]|[1-9])$'; + } + // type 2: <4-byte as-number>:<2-byte assigned number> + type string { + pattern + '^(4[0-2][0-9][0-4][0-9][0-6][0-7][0-2][0-9][0-5]|' + + '[0-3][0-9]{9}|[1-9][0-9]{1,8}|[1-9]):' + + '(65[0-5][0-3][0-5]|[1-5]{2}[0-9]{3}|' + + '[1-9]{0,2}[0-9][0-9]|[1-9])$'; + } + } + description "A route distinguisher value"; + reference "RFC4364"; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-network-instance.yang b/src/plugins/yang/openconfig/openconfig-network-instance.yang new file mode 100644 index 0000000..0d42a11 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-network-instance.yang @@ -0,0 +1,1093 @@ +module openconfig-network-instance { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/network-instance"; + + prefix "oc-netinst"; + + // import some basic types + //import ietf-inet-types { prefix inet; } + import ietf-yang-types { prefix "yang"; } + import ietf-inet-types { prefix "inet"; } + import openconfig-network-instance-types { prefix "oc-ni-types"; } + import openconfig-policy-types { prefix "oc-pol-types"; } + import openconfig-routing-policy { prefix "oc-rpol"; } + import openconfig-local-routing { prefix "oc-loc-rt"; } + import openconfig-interfaces { prefix "oc-if"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-network-instance-l3 { prefix "oc-ni-l3"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-bgp { prefix "oc-bgp"; } + import openconfig-mpls { prefix "oc-mpls"; } + import openconfig-vlan { prefix "oc-vlan"; } + import openconfig-ospfv2 { prefix "oc-ospfv2"; } + import openconfig-policy-forwarding { prefix "oc-pf"; } + import openconfig-segment-routing { prefix "oc-sr"; } + import openconfig-isis { prefix "oc-isis"; } + import openconfig-aft { prefix "oc-aft"; } + import openconfig-pim { prefix "oc-pim"; } + import openconfig-igmp { prefix "oc-igmp"; } + + // include submodules + include openconfig-network-instance-l2; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "An OpenConfig description of a network-instance. This may be + a Layer 3 forwarding construct such as a virtual routing and + forwarding (VRF) instance, or a Layer 2 instance such as a + virtual switch instance (VSI). Mixed Layer 2 and Layer 3 + instances are also supported."; + + oc-ext:openconfig-version "0.11.0"; + + revision "2018-08-11" { + description + "Add vlan id as additional key in MAC table"; + reference "0.11.0"; + } + + revision "2018-06-22" { + description + "Fix typo in OSPF when statement"; + reference "0.10.2"; + } + + revision "2018-06-05" { + description + "Fix bugs in when statements"; + reference "0.10.1"; + } + + revision "2018-02-19" { + description + "Add PIM and IGMP to network instance"; + reference "0.10.0"; + } + + revision "2017-12-13" { + description + "Fix incorrect constraint on SR and MPLS containers"; + reference "0.9.0"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes"; + reference "0.8.1"; + } + + revision "2017-02-28" { + description + "Add OSPFv2 to network instance"; + reference "0.8.0"; + } + + revision "2017-01-26" { + description + "Add policy forwarding to network instance"; + reference "0.7.0"; + } + + revision "2017-01-13" { + description + "Add AFT to the network instance"; + reference "0.6.0"; + } + + revision "2016-12-15" { + description + "Add segment routing to network instance"; + reference "0.5.0"; + } + + revision "2016-11-10" { + description + "Add IS-IS to OpenConfig network instance"; + reference "0.4.1"; + } + + revision "2016-10-12" { + description + "Update table connections"; + reference "0.4.0"; + } + + revision "2016-09-28" { + description + "Change L2 instance to submodule; add MAC table"; + reference "0.3.0"; + } + + revision "2016-08-11" { + description + "Resolve repeated container names in routing protocols"; + reference "0.2.3"; + } + + revision "2016-07-08" { + description + "Updated with refactored routing protocol models"; + reference "0.2.1"; + } + + revision "2016-03-29" { + description + "Initial revision"; + reference "0.2.0"; + } + + revision "2015-10-18" { + description + "Initial revision"; + reference "0.1.0"; + } + + typedef network-instance-ref { + type leafref { + path "/network-instances/network-instance/config/name"; + } + description + "A re-usable type that can be referenced within other + modules that references a network instance."; + } + + grouping network-instance-top { + description + "Top-level grouping containing a list of network instances."; + + container network-instances { + description + "The L2, L3, or L2+L3 forwarding instances that are + configured on the local system"; + + list network-instance { + key "name"; + + description + "Network instances configured on the local system"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "A unique name identifying the network instance"; + } + + uses l2ni-instance { + when "config/type = 'L2VSI' or config/type = 'L2P2P'" + + " or config/type = 'L2L3' or config/type = 'DEFAULT_INSTANCE'" { + description + "Layer 2 configuration parameters included when + a network instance is a Layer 2 instance or a + combined L2L3 instance"; + } + } + + container config { + description + "Configuration parameters relating to a network + instance"; + uses network-instance-config; + uses network-instance-type-dependent-config; + } + + + container state { + config false; + description + "Operational state parameters relating to a network + instance"; + uses network-instance-config; + uses network-instance-type-dependent-config; + uses network-instance-state; + } + + container encapsulation { + when "../config/type != 'DEFAULT_INSTANCE'" { + description + "Only allow the encapsulation of the instance to be + set when the instance is not the default instance"; + } + description + "Configuration parameters relating to the encapsulation + used for the network instance"; + + container config { + description + "Configuration parameters relating to the encapsulation + of the network instance"; + + uses encapsulation-config; + + uses l2ni-encapsulation-config { + when "../../config/type = 'L2VSI' or ../../config/type = 'L2P2P' + or ../../config/type = 'L2L3'" { + description + "Only allow L2 encapsulations to be set + when the instance is of a type that supports + L2"; + } + } + } + + container state { + config false; + description + "State parameters relating to the encapsulation of + the network instance"; + uses encapsulation-config; + + uses l2ni-encapsulation-config { + when "../../config/type = 'L2VSI' or ../../config/type = 'L2P2P' + or ../../config/type = 'L2L3'" { + description + "Only allow L2 encapsulations to be set + when the instance is of a type that supports + L2"; + } + } + } + } + + container inter-instance-policies { + description + "Policies dictating how RIB or FIB entries are imported + to and exported from this instance"; + + uses oc-rpol:apply-policy-group; + } + + container table-connections { + description + "Policies dictating how RIB or FIB entries are propagated + between tables"; + + list table-connection { + key "src-protocol dst-protocol address-family"; + + description + "A list of connections between pairs of routing or + forwarding tables, the leaking of entries between + which is specified by the import policy. + + A connection connecting a source table to a destination + table implies that routes that match the policy specified + for the connection are available for the destination + protocol to advertise, or match within its policies."; + + leaf src-protocol { + type leafref { + path "../config/src-protocol"; + } + description + "The name of the protocol associated with the table + which should be utilised as the source of forwarding + or routing information"; + } + + leaf dst-protocol { + type leafref { + path "../config/dst-protocol"; + } + description + "The table to which routing entries should be + exported"; + } + + leaf address-family { + type leafref { + path "../config/address-family"; + } + description + "The address family associated with the connection"; + } + + container config { + description + "Configuration parameters relating to the connection + between tables"; + uses inter-table-policies-config; + } + container state { + config false; + description + "State parameters relating to the connection between + tables"; + uses inter-table-policies-config; + } + } + } + + container interfaces { + description + "The interfaces that are associated with this network + instance"; + + list interface { + key "id"; + unique "config/interface config/subinterface"; + + description + "An interface associated with the network instance"; + + leaf id { + type leafref { + path "../config/id"; + } + description + "A reference to an identifier for this interface which + acts as a key for this list"; + } + + container config { + description + "Configuration parameters relating to the associated + interface"; + uses instance-interfaces-config; + } + + container state { + config false; + description + "Operational state parameters relating to the + associated interface"; + + uses instance-interfaces-config; + uses instance-interfaces-state; + } + } + } + + uses oc-ni-l3:l3ni-route-limit-structural { + when "type = 'L3VRF' or type = 'L2L3'" { + description + "Layer 3 VRF or L2/L3 instances can have route limits + applied. This is not supported for the default instance."; + } + } + + container tables { + description + "The routing tables that are managed by this network + instance"; + + list table { + key "protocol address-family"; + + description + "A network instance manages one or more forwarding or + routing tables. These may reflect a Layer 2 forwarding + information base, a Layer 3 routing table, or an MPLS + LFIB. + + The table populated by a protocol within an instance is + identified by the protocol identifier (e.g., BGP, IS-IS) + and the address family (e.g., IPv4, IPv6) supported by + that protocol. Multiple instances of the same protocol + populate a single table -- such that + a single IS-IS or OSPF IPv4 table exists per network + instance. + + An implementation is expected to create entries within + this list when the relevant protocol context is enabled. + i.e., when a BGP instance is created with IPv4 and IPv6 + address families enabled, the protocol=BGP, + address-family=IPv4 table is created by the system."; + + leaf protocol { + type leafref { + path "../config/protocol"; + } + description + "A reference to the protocol that populates + the table"; + } + + leaf address-family { + type leafref { + path "../config/address-family"; + } + description + "A reference to the address-family that the + table represents"; + } + + container config { + description + "Configuration parameters relating to the + table"; + uses table-config; + } + + container state { + config false; + description + "State parameters related to the table"; + uses table-config; + } + } + } + + container connection-points { + description + "The set of connection points within a forwarding + instance"; + + list connection-point { + key "connection-point-id"; + + description + "A connection point within a Layer 2 network instance. + Each connection-point consists of a set of interfaces + only one of which is active at any one time. Other than + the specification of whether an interface is local + (i.e., exists within this network-instance), or remote, + all configuration and state parameters are common"; + + leaf connection-point-id { + type leafref { + path "../config/connection-point-id"; + } + description + "A locally significant reference for the + connection-point"; + } + + container config { + description + "Configuration parameters relating to a Layer 2 + network instance connection point"; + uses instance-connection-point-config; + } + container state { + config false; + description + "Operational state parameters relating to a Layer 2 + network instance connection point"; + + uses instance-connection-point-config; + uses instance-connection-point-state; + } + + container endpoints { + when "../../../config/type = 'L2P2P' " + + "or ../../../config/type = 'L2VSI'" { + description + "Configuration parameters to associate interfaces + into a common group for use in Layer 2 network + instances"; + } + + description + "The set of endpoints which are grouped within the + connection point"; + + list endpoint { + key "endpoint-id"; + + description + "A list of the endpoints (interfaces or remote + connection points that can be used for this + connection point). The active endpoint is selected + based on the precedence that it is configured + with"; + + leaf endpoint-id { + type leafref { + path "../config/endpoint-id"; + } + description + "A pointer to the configured identifier for the + endpoint"; + } + + container config { + description + "Configuration parameters relating to the + endpoint"; + uses instance-endpoint-config; + } + container state { + config false; + description + "Operational state parameters relating to the + endpoint"; + uses instance-endpoint-config; + uses instance-endpoint-state; + } + + container local { + when "../config/type = 'LOCAL'" { + description + "Only include the local configuration when + the endpoint is specified to be local to + the network element"; + } + + description + "Configuration and operational state parameters + relating to a local interface"; + + container config { + description + "Configuration parameters relating to a local + endpoint"; + uses instance-endpoint-local-config; + } + + container state { + config false; + description + "Operational state parameters relating to a + local endpoint"; + uses instance-endpoint-local-config; + } + } + + container remote { + when "../config/type = 'REMOTE'" { + description + "Only include the remote configuration when + the endpoint is specified to be remote to + the network element"; + } + + description + "Configuration and operational state parameters + relating to a remote interface"; + + container config { + description + "Configuration parameters relating to a remote + endpoint"; + uses instance-endpoint-remote-config; + } + + container state { + config false; + description + "Operational state parameters relating to + a remote endpoint"; + uses instance-endpoint-remote-config; + } + } + } + } + } + } + + uses oc-mpls:mpls-top { + when "config/type = 'DEFAULT_INSTANCE'" { + description + "MPLS configuration is only valid within the default + network instance."; + } + } + + uses oc-sr:sr-top { + when "config/type = 'DEFAULT_INSTANCE'" { + description + "Segment routing configuration is only valid with the default + network instance."; + } + } + + uses oc-vlan:vlan-top; + + uses oc-pf:policy-forwarding-top; + + uses oc-aft:aft-top; + + container protocols { + description + "The routing protocols that are enabled for this + network-instance."; + + list protocol { + key "identifier name"; + + description + "A process (instance) of a routing protocol. Some + systems may not support more than one instance of + a particular routing protocol"; + + leaf identifier { + type leafref { + path "../config/identifier"; + } + description + "The protocol name for the routing or forwarding + protocol to be instantiated"; + } + + leaf name { + type leafref { + path "../config/name"; + } + description + "An operator-assigned identifier for the routing + or forwarding protocol. For some processes this + leaf may be system defined."; + } + + container config { + description + "Configuration parameters relating to the routing + protocol instance"; + + uses protocols-config; + } + + container state { + config false; + description + "State parameters relating to the routing protocol + instance"; + + uses protocols-config; + uses protocols-state; + } + + uses oc-loc-rt:local-static-top { + when "config/identifier = 'STATIC'" { + description + "Include static route parameters only when the + protocol is set to static"; + } + description + "Configuration and state parameters relating to + static routes"; + } + + uses oc-loc-rt:local-aggregate-top { + when "config/identifier = 'LOCAL_AGGREGATE'" { + description + "Include aggregate route parameters only when the + protocol is set to aggregate"; + } + description + "Configuration and state parameters relating to + locally generated aggregate routes"; + } + + uses oc-bgp:bgp-top { + when "config/identifier = 'BGP'" { + description + "Include BGP parameters only when the protocol + is of type BGP"; + } + description + "Configuration and state parameters relating to + Border Gateway Protocol (BGP)"; + } + + uses oc-ospfv2:ospfv2-top { + when "config/identifier = 'OSPF'" { + description + "Include OSPFv2 parameters only when the protocol + is of type OSPFv2"; + } + } + + uses oc-isis:isis-top { + when "config/identifier = 'ISIS'" { + description + "Include IS-IS configuration when the protocol is of type + IS-IS"; + } + description + "Configuration and state parameters relating to Intermediate + System to Intermediate System (IS-IS)."; + } + + uses oc-pim:pim-top { + when "config/identifier = 'PIM'" { + description + "Include PIM configuration when the protocol is of type + PIM"; + } + description + "Configuration and state parameters relating to Protocol + Indepdendent Multicast (PIM)."; + } + + uses oc-igmp:igmp-top { + when "config/identifier = 'IGMP'" { + description + "Include IGMP configuration when the protocol is of type + IGMP"; + } + description + "Configuration and state parameters relating to the Internet + Group Management Protocol (IGMP)."; + } + } + } + } + } + } + + grouping network-instance-type-dependent-config { + description + "Type dependent network instance configuration"; + + uses oc-ni-l3:l3ni-instance-common-config { + when "type = 'L3VRF' or type = 'L2L3'" { + description + "Layer 3 VRF configuration parameters included when a + network instance is a L3VRF or combined L2L3 instance"; + } + } + + uses l2ni-instance-common-config { + when "type = 'L2VSI' or type = 'L2P2P'" + + " or type = 'L2L3'" { + description + "Layer 2 configuration parameters included when + a network instance is a Layer 2 instance or a + combined L2L3 instance"; + } + } + } + + grouping instance-endpoint-config { + description + "Configuration data relating to an forwarding-instance + endpoint"; + + leaf endpoint-id { + type string; + description + "An identifier for the endpoint"; + } + + leaf precedence { + type uint16; + description + "The precedence of the endpoint - the lowest precendence + viable endpoint will be utilised as the active endpoint + within a connection"; + } + + leaf type { + type identityref { + base "oc-ni-types:ENDPOINT_TYPE"; + } + description + "The type of endpoint that is referred to by the current + endpoint"; + } + + } + + grouping instance-endpoint-local-config { + description + "Configuration parameters relating to an endpoint that is local + to the current system"; + + uses oc-if:interface-ref-common; + } + + grouping instance-endpoint-remote-config { + description + "Configuration parameters relating to an endpoint that is + remote from the local system"; + leaf remote-system { + type inet:ip-address; + description + "The IP address of the device which hosts the + remote end-point"; + } + + leaf virtual-circuit-identifier { + type uint32; + description + "The virtual-circuit identifier that identifies the + connection at the remote end-point"; + } + } + + grouping instance-endpoint-state { + description + "Operational state data relating to a forwarding-instance + endpoint"; + leaf active { + type boolean; + description + "When the backup endpoint is active, the value of this + parameter is set to true"; + } + } + + grouping instance-connection-point-config { + description + "Configuration data relating to a forwarding-instance + connection point"; + + leaf connection-point-id { + type string; + description + "An identifier for a connection point"; + } + } + + grouping instance-connection-point-state { + description + "Operational state data relating to a forwarding-instance + connection point"; + } + + grouping table-config { + description + "Config parameters relating to an L2/L2.5/L3 table that exists + within a network instance"; + + leaf protocol { + type leafref { + path "../../../../protocols/protocol/config/identifier"; + } + description + "Reference to the protocol that the table is associated with."; + } + + leaf address-family { + type identityref { + base oc-types:ADDRESS_FAMILY; + } + description + "The address family (IPv4, IPv6) of the table's entries"; + } + } + + grouping instance-interfaces-config { + description + "Configuration parameters related to an interface associated + with the network instance"; + + leaf id { + type string; + description + "A unique identifier for this interface - this is expressed + as a free-text string"; + } + + uses oc-if:interface-ref-common; + + leaf-list associated-address-families { + type identityref { + base oc-types:ADDRESS_FAMILY; + } + description + "The address families on the subinterface which are to be + associated with this network instance. When this leaf-list + is empty and the network instance requires Layer 3 information + the address families for which the network instance is + enabled should be imported. If the value of this leaf-list + is specified then the association MUST only be made for + those address families that are included in the list."; + } + } + + grouping instance-interfaces-state { + description + "Operational state parameters relating to an interface + associated with this network instance"; + } + + grouping inter-table-policies-config { + description + "Configuration entries that relate to how RIB or FIB entries + are propagated between tables within the same network + instance"; + + leaf src-protocol { + type leafref { + // we are at table-connections/table-connection/config/. + path "../../../../tables/table/config/protocol"; + } + description + "The source protocol for the table connection"; + } + + leaf address-family { + type leafref { + // we are at table-connections/table-connection/config/. + path "../../../../tables/" + + "table[protocol=current()/../src-protocol]/" + + "config/address-family"; + } + description + "The address family associated with the connection. This + must be defined for the source protocol. The target + address family is implicitly defined by the address family + specified for the source protocol."; + } + + leaf dst-protocol { + type leafref { + path "../../../../tables/table/config/protocol"; + } + description + "The destination protocol for the table connection"; + } + + uses oc-rpol:apply-policy-import-config; + } + + grouping network-instance-config { + description + "Configuration parameters relating to a top-level network + instance"; + + leaf name { + type string; + description + "An operator-assigned unique name for the forwarding + instance"; + } + + leaf type { + type identityref { + base "oc-ni-types:NETWORK_INSTANCE_TYPE"; + } + description + "The type of network instance. The value of this leaf + indicates the type of forwarding entries that should be + supported by this network instance"; + } + + leaf enabled { + type boolean; + description + "Whether the network instance should be configured to be + active on the network element"; + } + + leaf description { + type string; + description + "A free-form string to be used by the network operator to + describe the function of this network instance"; + } + + leaf router-id { + type yang:dotted-quad; + description + "A identifier for the local network instance - typically + used within associated routing protocols or signalling + routing information in another network instance"; + } + + leaf route-distinguisher { + type oc-ni-types:route-distinguisher; + description + "The route distinguisher that should be used for the local + VRF or VSI instance when it is signalled via BGP."; + } + } + + grouping network-instance-state { + description + "Operational state parameters relating to a network instance"; + } + + grouping protocols-config { + description + "Configuration parameters relating to a generic protocol + instance within a network instance"; + + leaf identifier { + type identityref { + base "oc-pol-types:INSTALL_PROTOCOL_TYPE"; + } + description + "The protocol identifier for the instance"; + } + + leaf name { + type string; + description + "A unique name for the protocol instance"; + } + + leaf enabled { + type boolean; + description + "A boolean value indicating whether the local protocol + instance is enabled."; + } + + leaf default-metric { + type uint32; + description + "The default metric within the RIB for entries that are + installed by this protocol instance. This value may + be overridden by protocol specific configuration options. + The lower the metric specified the more preferable the RIB + entry is to be selected for use within the network instance. + Where multiple entries have the same metric value then these + equal cost paths should be treated according to the specified + ECMP path selection behaviour for the instance"; + } + } + + grouping protocols-state { + description + "Operational state parameters relating to a protocol instance"; + } + + grouping instance-interface-association-config { + description + "Grouping containing leaves that are to be augmented into an + interface or subinterface to include mapping to a network + instance"; + + leaf network-instance { + type leafref { + path "/network-instances/network-instance/name"; + } + description + "The network instance that this interface is associated + with"; + } + } + + grouping encapsulation-config { + description + "Type agnostic configuration parameters relating to the + encapsulation of the network instance"; + + leaf encapsulation-type { + type identityref { + base oc-ni-types:ENCAPSULATION; + } + description + "The on-the-wire encapsulation that should be used when + sending traffic from this network instance"; + } + + // rjs: This is left here as I suspect that this can + // be used in EVPN. Need to validate implementations, otherwise + // move to L3. (TODO) + leaf label-allocation-mode { + type identityref { + base oc-ni-types:LABEL_ALLOCATION_MODE; + } + description + "The label allocation mode to be used for L3 entries + in the network instance"; + } + } + + uses network-instance-top; +} diff --git a/src/plugins/yang/openconfig/openconfig-openflow-types.yang b/src/plugins/yang/openconfig/openconfig-openflow-types.yang new file mode 100644 index 0000000..41c5dc0 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-openflow-types.yang @@ -0,0 +1,93 @@ +module openconfig-openflow-types { + + yang-version "1"; + + namespace "http://openconfig.net/yang/openflow/types"; + + prefix "openflow-types"; + + import openconfig-extensions { prefix oc-ext; } + + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types related to the Openflow configuration + and operational state model."; + + oc-ext:openconfig-version "0.1.1"; + + revision "2017-08-24" { + description + "Minor formatting fixes.Initial revision"; + reference "0.1.1"; + } + + revision "2017-06-01" { + description + "Initial revision"; + reference "0.1.0"; + } + + + typedef failure-mode { + type enumeration { + enum SECURE { + description + "Packets and messages destined to the controllers are + dropped. Flow entries continue to expire according to + their timeouts."; + } + enum STANDALONE { + description + "Processes all packets using the OFPP_NORMAL reserved + port. The switch acts as a legacy Ethernet switch or + router."; + } + } + description + "Type to define Openflow failure mode."; + } + + typedef transport { + type enumeration { + enum TCP { + description + "Transmission Control Protocol (TCP)."; + } + enum TLS { + description + "Transport Layer Security (TLS)."; + } + } + description + "Type to define Openflow transport protocol."; + } + + typedef auxiliary-id { + type uint8 { + range "0..15"; + } + description + "A Controller may have multiple auxiliary connections as + specified by the Openflow protocol. The main Controller + connection should always have the auxiliary-id set to zero. + All other connections must have an auxiliary-id different + from 0."; + } + + typedef datapath-id { + type string { + pattern '^[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){7}$'; + } + description + "The datapath-id type represents an OpenFlow + datapath identifier. The lower 48-bits are for + a MAC address, while the upper 16-bits are + implementer-defined."; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-openflow.yang b/src/plugins/yang/openconfig/openconfig-openflow.yang new file mode 100644 index 0000000..ab7a433 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-openflow.yang @@ -0,0 +1,314 @@ +module openconfig-openflow { + + yang-version "1"; + + namespace "http://openconfig.net/yang/openflow"; + + prefix "openflow"; + + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-openflow-types { prefix of-types; } + import openconfig-system { prefix oc-sys; } + + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data for + Openflow."; + + oc-ext:openconfig-version "0.1.1"; + + revision "2017-08-24" { + description + "Minor formatting fixes.Initial revision"; + reference "0.1.1"; + } + + revision "2017-06-01" { + description + "Initial revision"; + reference "0.1.0"; + } + + grouping openflow-controller-config { + description + "Openflow controller config"; + + leaf name { + type string; + description "Name of this Openflow controller. All connections + for the same controller need to have the same name."; + } + } + + grouping openflow-controller-state { + description + "Openflow controller state"; + } + + grouping openflow-controllers-top { + description + "Top-level for the Openflow controllers model"; + + container controllers { + description + "Container for the Openflow controllers model"; + + list controller { + key "name"; + + description + "The Openflow Switch connects to all Openflow controllers + configured"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "The name identifies the controller."; + } + + container config { + description + "Container for the Openflow controller config."; + + uses openflow-controller-config; + } + + container state { + config false; + + description + "Container for the Openflow controller state."; + + uses openflow-controller-config; + uses openflow-controller-state; + } + + uses openflow-connections-top; + } + } + } + + + grouping openflow-connections-config { + description + "Configuration data for OpenFlow controller connections"; + + leaf aux-id { + type of-types:auxiliary-id; + description + "Controller auxiliary ID. Must be 0 for the main controller. + One controller may have multiple auxiliary connections as + specified by the Openflow protocol. Besides configuring the + main controller, it is also possible to configure auxiliary + connections. The main controller must have the aux-id + set to zero. All others must have an aux-id different + from 0."; + } + + leaf priority { + type uint8; + description + "Optional value for servicing auxiliary connections with + different priorities."; + } + + leaf address { + type oc-inet:ip-address; + description + "The IP address of the controller."; + } + + leaf port { + type oc-inet:port-number; + default 6653; + description + "Controller port to use."; + } + + leaf transport { + type of-types:transport; + default TCP; + description + "Controller transport protocol used."; + } + + leaf certificate-id { + type string; + description + "Certificate ID is used for TLS connections. When installed, + certificates are associated with an ID. This ID specifies the + certificate to use in a TLS connection."; + } + + leaf source-interface { + type oc-if:base-interface-ref; + description + "Optionally specify the source interface for the + controller connection."; + } + } + + grouping openflow-connections-state { + description + "Operational state data for OpenFlow controller connections"; + + leaf connected { + type boolean; + description + "When set to true, indicates the connection between the + switch and controller is established."; + } + } + + grouping openflow-connections-top { + description + "Top-level grouping for OpenFlow controller connections"; + + container connections { + description + "Enclosing container for list of controller connections"; + + list connection { + key "aux-id"; + description + "List of connections to the OpenFlow controller. + The Openflow switch always connects to configured Openflow + controllers. Each controller can have more than one + connection, called auxiliary Openflow connections."; + + leaf aux-id { + type leafref { + path "../config/aux-id"; + } + description + "Reference to auxiliary id list key"; + } + + container config { + description + "Configuration data for OpenFlow controller connections"; + + uses openflow-connections-config; + } + + container state { + + config false; + + description + "Operational state data for OpenFlow controller + connections"; + + uses openflow-connections-config; + uses openflow-connections-state; + } + } + } + } + + + grouping openflow-agent-config { + description + "Openflow agent config"; + + leaf datapath-id { + type of-types:datapath-id; + description + "Datapath unique ID. The lower 48-bits are for + a MAC address, while the upper 16-bits are + implementer-defined."; + } + + leaf failure-mode { + type of-types:failure-mode; + description + "Failure mode for Openflow."; + } + + leaf backoff-interval { + type uint32; + units seconds; + description + "Openflow agent connection backoff interval."; + } + + leaf max-backoff { + type uint32; + units seconds; + description + "Openflow agent max backoff time."; + } + + leaf inactivity-probe { + type uint32; + units seconds; + description + "Openflow agent inactivity probe period."; + } + } + + grouping openflow-agent-state { + description + "Openflow agent state"; + } + + grouping openflow-agent-top { + description + "Top-level for the Openflow agent model"; + + container agent { + description + "Container for the Openflow agent model."; + + container config { + description + "Container for the Openflow agent config."; + + uses openflow-agent-config; + } + + container state { + config false; + + description + "Container for the Openflow agent state."; + + uses openflow-agent-config; + uses openflow-agent-state; + } + } + } + + + grouping openflow-top { + description + "Top-level for the Openflow model"; + + container openflow { + description + "Container for Openflow model"; + + + uses openflow-controllers-top; + uses openflow-agent-top; + } + } + + + augment "/oc-sys:system" { + description + "Adding OpenConfig data to the system model"; + + uses openflow-top; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-optical-amplifier.yang b/src/plugins/yang/openconfig/openconfig-optical-amplifier.yang new file mode 100644 index 0000000..1467148 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-optical-amplifier.yang @@ -0,0 +1,474 @@ +module openconfig-optical-amplifier { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/optical-amplfier"; + + prefix "oc-opt-amp"; + + import openconfig-platform { prefix oc-platform; } + import openconfig-transport-line-common { prefix oc-line-com; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This model describes configuration and operational state data + for optical amplifiers, deployed as part of a transport + line system."; + + oc-ext:openconfig-version "0.4.0"; + + revision "2017-10-02" { + description + "Add support for fiber type profile and physical component + association for amplifier gain blocks."; + reference "0.4.0"; + } + + revision "2017-09-08" { + description + "Correct bug with OSC interfaces"; + reference "0.3.1"; + } + + revision "2017-07-08" { + description + "Add monitor port type and refs to hw ports, "; + reference "0.3.0"; + } + + revision "2017-03-28" { + description + "Added min/max/avg stats, status for media channels, OCM, APS"; + reference "0.2.0"; + } + + revision "2016-03-31" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // extension statements + + // feature statements + + // identity statements + + identity OPTICAL_AMPLIFIER_TYPE { + description + "Type definition for different types of optical amplifiers"; + } + + identity EDFA { + base OPTICAL_AMPLIFIER_TYPE; + description + "Erbium doped fiber amplifer (EDFA)"; + } + + identity FORWARD_RAMAN { + base OPTICAL_AMPLIFIER_TYPE; + description + "Forward pumping Raman amplifier"; + } + + identity BACKWARD_RAMAN { + base OPTICAL_AMPLIFIER_TYPE; + description + "Backward pumping Raman amplifier"; + } + + identity HYBRID { + base OPTICAL_AMPLIFIER_TYPE; + description + "Hybrid backward pumping Raman + EDFA amplifier"; + } + + identity GAIN_RANGE { + description + "Base type for expressing the gain range for a switched gain + amplifier. The gain range is expressed as a generic setting, + e.g., LOW/MID/HIGH. The actual db range will be determined + by the implementation."; + } + + identity LOW_GAIN_RANGE { + base GAIN_RANGE; + description + "LOW gain range setting"; + } + + identity MID_GAIN_RANGE { + base GAIN_RANGE; + description + "MID gain range setting"; + } + + identity HIGH_GAIN_RANGE { + base GAIN_RANGE; + description + "HIGH gain range setting"; + } + + identity FIXED_GAIN_RANGE { + base GAIN_RANGE; + description + "Fixed or non-switched gain amplfier"; + } + + identity OPTICAL_AMPLIFIER_MODE { + description + "Type definition for different types of optical amplifier + operating modes"; + } + + identity CONSTANT_POWER { + base OPTICAL_AMPLIFIER_MODE; + description + "Constant power mode"; + } + + identity CONSTANT_GAIN { + base OPTICAL_AMPLIFIER_MODE; + description + "Constant gain mode"; + } + + + identity FIBER_TYPE_PROFILE { + description + "Type definition for different profiles of fiber types"; + } + + identity DSF { + base FIBER_TYPE_PROFILE; + description + "Dispersion shifted fiber"; + } + + identity LEAF { + base FIBER_TYPE_PROFILE; + description + "Large effective area fiber"; + } + + identity SSMF { + base FIBER_TYPE_PROFILE; + description + "Standard single mode fiber"; + } + + identity TWC { + base FIBER_TYPE_PROFILE; + description + "True wave classic"; + } + + identity TWRS { + base FIBER_TYPE_PROFILE; + description + "True wave reduced slope"; + } + + // grouping statements + + grouping optical-amplifier-config { + description + "Configuration data for optical amplifiers"; + + leaf name { + type string; + description + "User-defined name assigned to identify a specific amplifier + in the device"; + } + + leaf type { + type identityref { + base OPTICAL_AMPLIFIER_TYPE; + } + description + "Type of the amplifier"; + } + + leaf target-gain { + type decimal64 { + fraction-digits 2; + range 0..max; + } + units dB; + description + "Positive gain applied by the amplifier."; + } + + leaf target-gain-tilt { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "Gain tilt control"; + } + + leaf gain-range { + type identityref { + base GAIN_RANGE; + } + description + "Selected gain range. The gain range is a platform-defined + value indicating the switched gain amplifier setting"; + } + + leaf amp-mode { + type identityref { + base OPTICAL_AMPLIFIER_MODE; + } + description + "The operating mode of the amplifier"; + } + + leaf target-output-power { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "Output optical power of the amplifier."; + } + + leaf enabled { + type boolean; + description + "Turns power on / off to the amplifiers gain module."; + } + + leaf fiber-type-profile { + type identityref { + base FIBER_TYPE_PROFILE; + } + description + "The fiber type profile specifies details about the + fiber type which are needed to accurately determine + the gain and perform efficient amplification. This is + only needed for Raman type amplifiers."; + } + + } + + grouping optical-amplifier-state { + description + "Operational state data for optical amplifiers"; + + leaf component { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to the system-supplied physical component that + the amplifier gain block is contained within. Multiple + amplifier gain blocks may be contained within the same + physical component."; + } + + leaf ingress-port { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to system-supplied name of the amplifier ingress + port. This leaf is only valid for ports of type INGRESS."; + } + + leaf egress-port { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to system-supplied name of the amplifier egress + port. This leaf is only valid for ports of type EGRESS."; + } + + container actual-gain { + description + "The actual gain applied by the amplifier in units of + 0.01dB. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dB; + } + + container actual-gain-tilt { + description + "The actual tilt applied by the amplifier in units of + 0.01dB. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dB; + } + + container input-power-total { + description + "The total input optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container input-power-c-band { + description + "The C band (consisting of approximately 191 to 195 THz or + 1530nm to 1565 nm) input optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container input-power-l-band { + description + "The L band (consisting of approximately 184 to 191 THz or + 1565 to 1625 nm) input optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container output-power-total { + description + "The total output optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container output-power-c-band { + description + "The C band (consisting of approximately 191 to 195 THz or + 1530nm to 1565 nm)output optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container output-power-l-band { + description + "The L band (consisting of approximately 184 to 191 THz or + 1565 to 1625 nm)output optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container laser-bias-current { + description + "The current applied by the system to the transmit laser to + achieve the output power. The current is expressed in mA + with up to two decimal precision. If avg/min/max statistics + are not supported, just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-mA; + } + + container optical-return-loss { + description + "The optical return loss (ORL) is the ratio of the light + reflected back into the port to the light launched out of + the port. ORL is in units of 0.01dBm. If avg/min/max + statistics are not supported, just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + } + + grouping optical-amplifier-top { + description + "Top-level grouping for optical amplifier data"; + + container optical-amplifier { + description + "Enclosing container for amplifiers and supervisory channels"; + + container amplifiers { + description + "Enclosing container for list of amplifiers"; + + list amplifier { + key "name"; + description + "List of optical amplifiers present in the device"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the name of the amplifier"; + } + + container config { + description + "Configuration data for the amplifier"; + + uses optical-amplifier-config; + } + + container state { + + config false; + + description + "Operational state data for the amplifier"; + + uses optical-amplifier-config; + uses optical-amplifier-state; + } + } + } + + container supervisory-channels { + description + "Enclosing container for list of supervisory channels"; + + list supervisory-channel { + key "interface"; + description + "List of supervisory channels"; + + leaf interface { + type leafref { + path "../config/interface"; + } + description + "Reference to the interface of the supervisory channel"; + } + + uses oc-line-com:optical-osc-top; + } + } + } + } + + // data definition statements + + uses optical-amplifier-top; + + +} diff --git a/src/plugins/yang/openconfig/openconfig-ospf-policy.yang b/src/plugins/yang/openconfig/openconfig-ospf-policy.yang new file mode 100644 index 0000000..35b915a --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospf-policy.yang @@ -0,0 +1,188 @@ +module openconfig-ospf-policy { + yang-version "1"; + + namespace "http://openconfig.net/yang/ospf-policy"; + + prefix "oc-ospf-pol"; + + import openconfig-routing-policy { prefix "oc-rpol"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-ospf-types { prefix "oc-ospf-types"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines extensions to the OpenConfig policy + model to add extensions for OSPF. This module is intended + to be generic for both OSPFv2 and OSPFv3."; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2016-08-22" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospf-match-config { + description + "Configuration parameters for OSPF match conditions"; + + leaf area-eq { + type oc-ospf-types:ospf-area-identifier; + description + "Match prefixes which are within a particular OSPF area"; + } + } + + grouping ospf-match-conditions { + description + "Match conditions that are added by OSPF"; + + container ospf-conditions { + description + "Match conditions specific to OSPF"; + + container config { + description + "Configuration parameters relating to OSPF match conditions"; + + uses ospf-match-config; + } + + container state { + config false; + description + "Operational state parameters relating to OSPF match conditions"; + + uses ospf-match-config; + } + } + } + + grouping ospf-actions-config { + description + "Configuration parameters for OSPF policy actions"; + + leaf set-area { + type oc-ospf-types:ospf-area-identifier; + description + "Set the area for the matched route. This action is typically + used when importing prefixes into OSPF, such that a route can + be imported into a specific area within the instance."; + } + } + + grouping ospf-actions-set-metric-config { + description + "Configuration parameters relating to setting the OSPF metric"; + + leaf metric-type { + type enumeration { + enum EXTERNAL_TYPE_1 { + description + "Set the external type 1 metric"; + } + enum EXTERNAL_TYPE_2 { + description + "Set the external type 2 metric"; + } + } + default "EXTERNAL_TYPE_2"; + description + "Specify the type of metric which is to be set by the policy"; + } + + leaf metric { + type oc-ospf-types:ospf-metric; + description + "Set the metric of the routes matching the policy to the value + specified by this leaf."; + } + } + + grouping ospf-actions { + description + "Actions that are added by OSPF to the action framework"; + + container ospf-actions { + description + "Actions specific to OSPF"; + + container config { + description + "Configuration parameters for OSPF actions"; + + uses ospf-actions-config; + } + + container state { + config false; + description + "Operational state parameters for OSPF actions"; + + uses ospf-actions-config; + } + + container set-metric { + description + "Configuration and state parameters relating to manipulating + the OSPF metric"; + + container config { + description + "Configuration parameters relating to setting the OSPF metric"; + uses ospf-actions-set-metric-config; + } + + container state { + config false; + description + "Operational state parameters relating to setting the OSPF + metric"; + + uses ospf-actions-set-metric-config; + } + } + } + } + + // augment the groupings into the routing policy model + + // TODO: discuss whether igp-actions should be used or whether this should + // be removed. + + augment "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:statements/oc-rpol:statement/" + + "oc-rpol:conditions" { + description + "Add OSPF specific match conditions to the routing policy model"; + uses ospf-match-conditions; + } + + augment "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:statements/oc-rpol:statement/" + + "oc-rpol:actions" { + description + "Add OSPF specific actions to the routing policy model"; + uses ospf-actions; + } + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-ospf-types.yang b/src/plugins/yang/openconfig/openconfig-ospf-types.yang new file mode 100644 index 0000000..0544670 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospf-types.yang @@ -0,0 +1,784 @@ +module openconfig-ospf-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/ospf-types"; + + prefix "oc-ospf-types"; + + // import some basic types + import ietf-yang-types { prefix "yang"; } + import openconfig-extensions { prefix "oc-ext"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Type definitions for OSPF"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + // typedefs + typedef ospf-area-identifier { + type union { + type uint32; + type yang:dotted-quad; + } + description + "An identifier for an area with OSPF version 2 or 3. This value + is expressed as either a dotted-quad, or a unsigned 32-bit + number"; + } + + typedef ospf-metric { + type uint16; + description + "A common type that can be utilised to express an OSPF metric"; + } + + typedef sr-sid-type { + type enumeration { + enum LABEL { + description + "When the length of the SR/Label Sub-TLV is specified to be 3, then + the right-most 20-bits represent a label value within the SR/Label + Sub-TLV. When this leaf is set to a value of Label the first-entry + leaf should be interpreted to be an MPLS label."; + } + enum SID { + description + "When the length of the SR/Label Sub-TLV is specified to be 4, then + the value specified in the first-entry leaf should be specified to + be a segment identifier."; + } + } + description + "A common type used to express the type of segment identifier that is + used in LSDB entries relating to segment routing"; + } + + // identities + identity OSPF_LSA_TYPE { + description + "Base identity for an OSPF LSA type. This identity is intended + to be used across both OSPFv2 and OSPFv3. Identity values that + correspond to only one OSPF version are marked as such."; + } + + identity ROUTER_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 1 - ROUTER_LSA. An LSA originated by each router within + the area describing the state and cost of the router's links + in the area."; + reference "RFC2328"; + } + + identity NETWORK_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 2 - NETWORK_LSA. An LSA originated for each broadcast and + non-broadcast multiple access (NBMA) in the area. This LSA is + originated by the designated router."; + reference "RFC2328"; + } + + identity SUMMARY_IP_NETWORK_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 3 - SUMMARY_IP_NETWORK_LSA. An LSA originated by area + border routers describing inter-area destinations. This LSA type + is used when the destination is an IP network"; + reference "RFC2328"; + } + + identity SUMMARY_ASBR_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 4 - SUMMARY_ASBR_LSA. An LSA originated by an area border + router describing inter-area destinations. This LSA type is used + when the destination is an AS boundary router."; + reference "RFC2328"; + } + + identity AS_EXTERNAL_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 5 - AS_EXTERNAL_LSA. This LSA type is used to describe + destinations external to the autonomous system, and is + originated by an AS boundary router (ASBR)."; + reference "RFC2328"; + } + + identity NSSA_AS_EXTERNAL_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 7 - NSSA_AS_EXTERNAL_LSA. This LSA type is used by + systems within a not-so-stubby-area (NSSA) to inject external + prefixes into the LSDB. They are translated to Type 5 LSAs + at an ABR device."; + reference "RFC3101"; + } + + identity OSPFV2_LINK_SCOPE_OPAQUE_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 9 - OSPFV2_LINK_SCOPE_OPAQUE_LSA. This LSA type is used + in OSPFv2 to distribute arbitrary information via the OSPF + protocol. The contents is specific to the application defining + the Opaque Type specified within the LSDB. LSAs with Type 9 have + a scope of the link that they are being transmitted on (and the + associated network or subnetwork)."; + reference "RFC5250"; + } + + identity OSPFV2_AREA_SCOPE_OPAQUE_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 10 - OSPFV2_AREA_SCOPE_OPAQUE_LSA. This LSA type is used + in OSPFv2 to distribute arbitrary information via the OSPF + protocol. The contents is specific to the application defining + the Opaque Type specified within the LSDB. LSAs with Type 10 have + a scope of the area that they are transmitted within."; + reference "RFC5250"; + } + + identity OSPFV2_AS_SCOPE_OPAQUE_LSA { + base "OSPF_LSA_TYPE"; + description + "Type 11 - OSPFV2_AS_SCOPE_OPAQUE_LSA. This LSA type is used + in OSPFv2 to distribute arbitrary information via the OSPF + protocol. The contents is specific to the application defining + the Opaque Type specified within the LSDB. LSAs with Type 11 + have a scope of the autonomous system that they are transmitted + within."; + reference "RFC5250"; + } + + identity ROUTER_LSA_TYPES { + description + "Sub-types of the router LSA"; + } + + identity ROUTER_LSA_P2P { + base "ROUTER_LSA_TYPES"; + description + "The LSA represents a point-to-point connection to another + router"; + } + + identity ROUTER_LSA_TRANSIT_NETWORK { + base "ROUTER_LSA_TYPES"; + description + "The LSA represents a connection to a transit network"; + } + + identity ROUTER_LSA_STUB_NETWORK { + base "ROUTER_LSA_TYPES"; + description + "The LSA represents a connection to a stub network"; + } + + identity ROUTER_LSA_VIRTUAL_LINK { + base "ROUTER_LSA_TYPES"; + description + "The LSA represents a virtual link connection"; + } + + identity OSPF_NEIGHBOR_STATE { + description + "The state of an adjacency between the local system and a remote + device"; + } + + identity DOWN { + base "OSPF_NEIGHBOR_STATE"; + description + "The initial state of a neighbor, indicating that no recent + information has been received from the neighbor."; + reference "RFC2328"; + } + + identity ATTEMPT { + base "OSPF_NEIGHBOR_STATE"; + description + "Utilised for neighbors that are attached to NBMA networks, it + indicates that no information has been recently received from + the neighbor but that Hello packets should be directly sent + to that neighbor."; + reference "RFC2328"; + } + + identity INIT { + base "OSPF_NEIGHBOR_STATE"; + description + "Indicates that a Hello packet has been received from the + neighbor but bi-directional communication has not yet been + established. That is to say that the local Router ID does + not appear in the list of neighbors in the remote system's + Hello packet."; + reference "RFC2328"; + } + + identity TWO_WAY { + base "OSPF_NEIGHBOR_STATE"; + description + "Communication between the local and remote system is + bi-directional such that the local system's Router ID is listed + in the received remote system's Hello packet."; + reference "RFC2328"; + } + + identity EXSTART { + base "OSPF_NEIGHBOR_STATE"; + description + "An adjacency with the remote system is being formed. The local + system is currently transmitting empty database description + packets in order to establish the master/slave relationship for + the adjacency."; + reference "RFC2328"; + } + + identity EXCHANGE { + base "OSPF_NEIGHBOR_STATE"; + description + "The local and remote systems are currently exchanging database + description packets in order to determine which elements of + their local LSDBs are out of date."; + reference "RFC2328"; + } + + identity LOADING { + base "OSPF_NEIGHBOR_STATE"; + description + "The local system is sending Link State Request packets to the + remote system in order to receive the more recently LSAs that + were discovered during the Exchange phase of the procedure + establishing the adjacency."; + reference "RFC2328"; + } + + identity FULL { + base "OSPF_NEIGHBOR_STATE"; + description + "The neighboring routers are fully adjacent such that both + LSDBs are synchronized. The adjacency will appear in Router and + Network LSAs"; + reference "RFC2328"; + } + + identity OSPF_NETWORK_TYPE { + description + "Types of network that OSPF should consider attached to an + interface"; + } + + identity POINT_TO_POINT_NETWORK { + base "OSPF_NETWORK_TYPE"; + description + "A interface that connects two routers."; + reference "RFC2328"; + } + + identity BROADCAST_NETWORK { + base "OSPF_NETWORK_TYPE"; + description + "An interface that supports >2 attached routers which has the + ability to address all connected systems via a single + (broadcast) address."; + } + + identity NON_BROADCAST_NETWORK { + base "OSPF_NETWORK_TYPE"; + description + "An interface that supports >2 attached rotuers which does not + have the ability to address all connected systems with a + broadcast address."; + } + + // rjs TODO: Maybe need p2mp here. + + + identity OSPF_OPAQUE_LSA_TYPE { + description + "This identity is the base used for opaque LSA types. The values + that extend this base are those that are described in the IANA + OSPF Opaque Link-State Advertisements (LSA) Option Types registry"; + } + + identity TRAFFIC_ENGINEERING { + base "OSPF_OPAQUE_LSA_TYPE"; + description + "The Traffic Engineering LSA. This type is used only with area-scope + Opaque LSAs - and is used to describe routers, point-to-point links + and connections to multi-access networks for traffic engineering + purposes."; + reference "RFC3630"; + } + + identity GRACE_LSA { + base "OSPF_OPAQUE_LSA_TYPE"; + description + "Grace LSAs are announced by a system undergoing graceful-restart. + A system that is attempting an OSPF graceful restart announces + Grace-LSAs with a specified grace period, indicating the intention + to have completed an restart within the specified period."; + reference "RFC3623"; + } + + identity ROUTER_INFORMATION { + base "OSPF_OPAQUE_LSA_TYPE"; + description + "The Router Information LSA is used by an OSPFv2 system to announce + optional capabilities of the local system, over and above those that + are included within the OSPF hello message field. The flooding scope + of the LSA can be link-, area-, or AS-wide (i.e., the LSA type can + be 9, 10 or 11)."; + reference "RFC7770"; + } + + identity OSPFV2_EXTENDED_PREFIX { + base "OSPF_OPAQUE_LSA_TYPE"; + description + "The Extended Prefix LSA is used in OSPFv2 to carry a set of attributes + that are to be associated with a prefix that is advertised in OSPF. The + attributes are carried as one or more TLV tuples. The flooding scope + of the LSA can be link-, area-, or AS-wide as specified by the + advertising system. The flooding scope of the LSA may exceed the scope + of the corresponding prefix."; + reference "RFC7684"; + } + + identity OSPFV2_EXTENDED_LINK { + base "OSPF_OPAQUE_LSA_TYPE"; + description + "The Extended Link LSA is used in OSPFv2 to carry a set of attributes + that are to be associated with a link that is advertised in OSPF. The + link attributes are carried as one or more TLV tuples. The flooding + scope of the link LSA is area-local - i.e., it is carried in a Type 10 + opaque LSA."; + reference "RFC7684"; + } + + identity OSPF_TE_LSA_TLV_TYPE { + description + "This identity is the base used for the type field of TLVs that are + included within the Traffic Engineering Opaque LSA."; + } + + identity TE_ROUTER_ADDRESS { + base "OSPF_TE_LSA_TLV_TYPE"; + description + "A stable IP address of the advertising router that is always reachable + if the node has connectivity."; + } + + identity TE_LINK { + base "OSPF_TE_LSA_TLV_TYPE"; + description + "A single link within a traffic engineering topology. A set of sub-TLVs + are carried within this attribute to indicate traffic engineering + characteristics of the link."; + } + + identity TE_ROUTER_IPV6_ADDRESS { + base "OSPF_TE_LSA_TLV_TYPE"; + description + "A stable IPv6 address of the advertising router that is always + reachable if the node has connectivity. This TLV is used only with + OSPFv3"; + reference "RFC5329"; + } + + identity TE_LINK_LOCAL { + base "OSPF_TE_LSA_TLV_TYPE"; + description + "Attributes associated with the local link by the system."; + reference "RFC4203"; + } + + identity TE_NODE_ATTRIBUTE { + base "OSPF_TE_LSA_TLV_TYPE"; + description + "Attributes associted with the local system"; + reference "RFC5786"; + } + + identity TE_OPTICAL_NODE_PROPERTY { + base "OSPF_TE_LSA_TLV_TYPE"; + description + "Attributes associated with the local optical node. A set of sub-TLVs + are carried within this TLV which are used within the GMPLS control + plane when using OSPF"; + } + + identity OSPF_TE_LINK_TLV_TYPE { + description + "This identity is the based used for the type field for sub-TLVs of the + Link TLV of the OSPF Traffic Engineering Opaque LSA"; + } + + identity TE_LINK_TYPE { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Link Type sub-TLV appears exactly once per OSPF-TE Link + and describes the type of the link"; + } + + identity TE_LINK_ID { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Link ID sub-TLV appears exactly once per OSPF-TE link and + identifies the remote end of the link."; + } + + identity TE_LINK_LOCAL_IP { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Local IP specifies a list of the interface addresses of the + local system corresponding to the traffic engineering link."; + } + + identity TE_LINK_REMOTE_IP { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Remote IP specifies a list of IP addresses of the remote + neighbors associated with the traffic engineering link."; + } + + identity TE_LINK_METRIC { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Metric specifies the link metric for traffic engineering + purposes"; + } + + identity TE_LINK_MAXIMUM_BANDWIDTH { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Maximum Bandwidth specifies the maximum bandwidth of the + link that it is associated with."; + } + + identity TE_LINK_MAXIMUM_RESERVABLE_BANDWIDTH { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE Maximum Reservable Bandwidth specifies the maximum + bandwidth that may be reserved on the link in bytes per second"; + } + + identity TE_LINK_UNRESERVED_BANDWIDTH { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE unreserved bandwidth indicates the amount of bandwidth + at each priority level that is currently not reserved"; + } + + identity TE_LINK_ADMIN_GROUP { + base "OSPF_TE_LINK_TLV_TYPE"; + description + "The OSPF-TE administrative group indicates the administrative group + that the is assigned to the interface"; + } + + identity TE_NODE_ATTRIBUTE_TLV_TYPE { + description + "This identity forms the base for sub-TLVs of the Node Attribute TLV + of the Traffic Engineering LSA"; + } + + identity NODE_IPV4_LOCAL_ADDRESS { + base "TE_NODE_ATTRIBUTE_TLV_TYPE"; + description + "The Node Attribute Sub-TLV contains a list of the IPv4 addresses of + the local system"; + } + + identity NODE_IPV6_LOCAL_ADDRESS { + base "TE_NODE_ATTRIBUTE_TLV_TYPE"; + description + "The Node Attribute Sub-TLV contains a list of the IPv6 addresses of + the local system"; + } + + identity GRACE_LSA_TLV_TYPES { + description + "This identity is used as the base for TLVs within the Grace LSA"; + } + + identity GRACE_PERIOD { + base "GRACE_LSA_TLV_TYPES"; + description + "This sub-TLV describes the period for which adjacencies should be + maintained with the restarting system"; + } + + identity GRACE_RESTART_REASON { + base "GRACE_LSA_TLV_TYPES"; + description + "This sub-TLV describes the reason for the OSPF restart of the system + that is restarting"; + } + + identity GRACE_IP_INTERFACE_ADDRESS { + base "GRACE_LSA_TLV_TYPES"; + description + "This sub-TLV specifies the restarting system's IP address on the + interface via which it is advertising the Grace LSA"; + } + + identity RI_LSA_TLV_TYPES { + description + "This identity is used as the base for the TLVs within the Router + Information LSA"; + reference "RFC7770"; + } + + identity RI_INFORMATIONAL_CAPABILITIES { + base "RI_LSA_TLV_TYPES"; + description + "Informational capabilities of the advertising system"; + reference "RFC7770"; + } + + identity RI_FUNCTIONAL_CAPABILITIES { + base "RI_LSA_TLV_TYPES"; + description + "Functional capabilities of the advertising system"; + reference "RFC7770"; + } + + identity RI_NODE_ADMIN_TAG { + base "RI_LSA_TLV_TYPES"; + description + "Operator-defined administrative tags associated with the advertising + system"; + reference "RFC7777"; + } + + identity RI_SR_SID_LABEL_RANGE { + base "RI_LSA_TLV_TYPES"; + description + "SID or Label ranges for use with segment routing when forwarding to + the advertising system"; + reference "draft-ietf-ospf-segment-routing-extensions"; + } + + identity RI_SR_ALGORITHM { + base "RI_LSA_TLV_TYPES"; + description + "The algorithms that are supported for segment routing by the + advertising system"; + reference "draft-ietf-ospf-segment-routing-extensions"; + } + + // will be shared with IS-IS + identity SR_ALGORITHM { + description + "This identity is used as a base for the algorithms that can be + supported for segment routing and are advertised by a system in the RI + LSA"; + } + + identity SPF { + base "SR_ALGORITHM"; + description + "The standard shortest path algorithm based on link metric, + as used by the OSPF protocol"; + } + + identity STRICT_SPF { + base "SR_ALGORITHM"; + description + "The standard shortest path algorithm based on link metric, with the + requirement that all nodes along the path honor the SPF decision. That + is to say that the SPF decision cannot be altered by local policy at + the node"; + } + + identity OSPF_RI_SR_SID_LABEL_TLV_TYPES { + description + "This identity is used as a base for the sub-TLVs of the Segment + Routing SID/Label Range TLV"; + } + + identity SR_SID_LABEL_TLV { + base "OSPF_RI_SR_SID_LABEL_TLV_TYPES"; + description + "A range of SID/Label values used by the local system"; + reference "draft-ietf-ospf-segment-routing-extensions"; + } + + identity OSPFV2_ROUTER_LINK_TYPE { + description + "OSPFv2 Router Link Types as per the IANA registry defined in + RFC2740"; + } + + identity POINT_TO_POINT_LINK { + base "OSPFV2_ROUTER_LINK_TYPE"; + description + "The link is a point-to-point connection to another router"; + } + + identity TRANSIT_NETWORK_LINK { + base "OSPFV2_ROUTER_LINK_TYPE"; + description + "The link is a connection to a transit network"; + } + + identity STUB_NETWORK_LINK { + base "OSPFV2_ROUTER_LINK_TYPE"; + description + "The link is a connection to a stub network"; + } + + identity VIRTUAL_LINK { + base "OSPFV2_ROUTER_LINK_TYPE"; + description + "The link is a virtual connection to another router"; + } + + identity OSPFV2_EXTENDED_PREFIX_SUBTLV_TYPE { + description + "Sub-TLVs of the OSPFv2 Extended Prefix LSA as defined by + RFC7684"; + } + + identity EXTENDED_PREFIX_RANGE { + base "OSPFV2_EXTENDED_PREFIX_SUBTLV_TYPE"; + description + "The attributes being described relate to a range of prefixes"; + } + + identity PREFIX_SID { + base "OSPFV2_EXTENDED_PREFIX_SUBTLV_TYPE"; + description + "The TLV describes a Segment Routing Prefix Segment Identifier + associated with a prefix"; + } + + identity SID_LABEL_BINDING { + base "OSPFV2_EXTENDED_PREFIX_SUBTLV_TYPE"; + description + "The TLV describes a binding of a SID to a path to the prefix, + which may have associated path characteristics"; + } + + identity OSPFV2_EXTENDED_PREFIX_SID_LABEL_BINDING_SUBTLV_TYPE { + description + "Sub-TLV types carried in the SID/Label Binding Sub-TLV of + the Extended Prefix Sub-TLV"; + } + + identity SID_MPLS_LABEL_BINDING { + base "OSPFV2_EXTENDED_PREFIX_SID_LABEL_BINDING_SUBTLV_TYPE"; + description + "This sub-TLV indicates a binding between an SR SID and an + MPLS label and must be present in the sub-TLV"; + } + + identity ERO_METRIC { + base "OSPFV2_EXTENDED_PREFIX_SID_LABEL_BINDING_SUBTLV_TYPE"; + description + "This sub-TLV indicates the cost of the ERO path being + advertised in the SID/Label TLV"; + } + + identity ERO_PATH { + base "OSPFV2_EXTENDED_PREFIX_SID_LABEL_BINDING_SUBTLV_TYPE"; + description + "This sub-TLV indicates the path associated with an ERO + being advertised in the SID/Label TLV"; + } + + identity OSPFV2_EXTPREFIX_BINDING_ERO_PATH_SEGMENT_TYPE { + description + "The types of segment included within an ERO Path described + within the SID/Label binding sub-TLV"; + } + + identity IPV4_SEGMENT { + base "OSPFV2_EXTPREFIX_BINDING_ERO_PATH_SEGMENT_TYPE"; + description + "The segment is specified as an IPv4 address"; + } + + identity UNNUMBERED_INTERFACE_SEGMENT { + base "OSPFV2_EXTPREFIX_BINDING_ERO_PATH_SEGMENT_TYPE"; + description + "The segment is specified as an unnumbered interface of + a remote system"; + } + + identity OSPFV2_EXTENDED_LINK_SUBTLV_TYPE { + description + "Sub-TLVs of the Extended Link TLV for OSPFv2"; + } + + identity ADJACENCY_SID { + base "OSPFV2_EXTENDED_LINK_SUBTLV_TYPE"; + description + "The extended link sub-TLV indicates an Adjacency SID"; + } + + identity MAX_METRIC_TRIGGER { + description + "Triggers which cause the maximum metric to be set for + entities advertised in OSPF"; + } + + identity MAX_METRIC_ON_SYSTEM_BOOT { + base "MAX_METRIC_TRIGGER"; + description + "Set the maximum metric when the system boots."; + } + + identity MAX_METRIC_INCLUDE { + description + "Entities that may optionally be included when advertising + the maximum metric."; + } + + identity MAX_METRIC_INCLUDE_STUB { + base "MAX_METRIC_INCLUDE"; + description + "Include stub networks when advertising the maximum metric."; + } + + identity MAX_METRIC_INCLUDE_TYPE2_EXTERNAL { + base "MAX_METRIC_INCLUDE"; + description + "Include OSPF Type 2 external routes when advertising + the maximum metric."; + } +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-ospfv2-area-interface.yang b/src/plugins/yang/openconfig/openconfig-ospfv2-area-interface.yang new file mode 100644 index 0000000..f2454c0 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospfv2-area-interface.yang @@ -0,0 +1,472 @@ +submodule openconfig-ospfv2-area-interface { + + belongs-to openconfig-ospfv2 { + prefix "oc-ospfv2"; + } + + import ietf-yang-types { prefix "yang"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-interfaces { prefix "oc-if"; } + import openconfig-ospf-types { prefix "oc-ospf-types"; } + + // include common submodule + include openconfig-ospfv2-common; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule provides OSPFv2 configuration and operational + state parameters that are specific to the area context"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospfv2-area-interface-config { + description + "Configuration parameters for an OSPF interface"; + + leaf id { + type string; + description + "An operator-specified string utilised to uniquely + reference this interface"; + } + + leaf network-type { + type identityref { + base "oc-ospf-types:OSPF_NETWORK_TYPE"; + } + description + "The type of network that OSPFv2 should use for the specified + interface."; + } + + leaf priority { + type uint8; + description + "The local system's priority to become the designated + router"; + } + + leaf multi-area-adjacency-primary { + type boolean; + default true; + description + "When the specified interface is included in more than one + area's configuration, this leaf marks whether the area should + be considered the primary (when the value is true). In the + case that this value is false, the area is considered a + secondary area."; + } + + leaf authentication-type { + type string; + // rjs TODO: discuss with bogdanov@ what the approach for auth + // links should be. + description + "The type of authentication that should be used on this + interface"; + } + + leaf metric { + type oc-ospf-types:ospf-metric; + description + "The metric for the interface"; + } + + leaf passive { + type boolean; + description + "When this leaf is set to true, the interface should be + advertised within the OSPF area but OSPF adjacencies should + not be established over the interface"; + } + + leaf hide-network { + type boolean; + description + "When this leaf is set to true, the network connected to + the interface should be hidden from OSPFv2 advertisements + per the procedure described in RFC6860."; + reference + "RFC6860 - Hiding Transit-Only Networks in OSFF"; + } + } + + grouping ospfv2-area-interface-timers-config { + description + "Configuration parameters relating to per-interface OSPFv2 + timers"; + + leaf dead-interval { + type uint32; + units seconds; + description + "The number of seconds that the local system should let + elapse before declaring a silent router down"; + reference "RFC2328"; + } + + leaf hello-interval { + type uint32; + units seconds; + description + "The number of seconds the local system waits between the + transmission of subsequent Hello packets"; + } + + leaf retransmission-interval { + type uint32; + units seconds; + description + "The number of seconds that the local system waits before + retransmitting an unacknowledged LSA."; + } + } + + grouping ospfv2-area-interface-mpls-config { + description + "Configuration parameters relating to MPLS extensions for OSPF"; + + leaf traffic-engineering-metric { + type uint32; + description + "A link metric that should only be considered for traffic + engineering purposes."; + reference "RFC3630, #2.5.5"; + } + } + + grouping ospfv2-area-interface-neighbor-config { + description + "Configuration parameters relating to an individual neighbor + system on an interface within an OSPF area"; + + leaf router-id { + type yang:dotted-quad; + description + "The router ID of the remote system."; + } + + leaf metric { + type oc-ospf-types:ospf-metric; + description + "The metric that should be considered to the remote neighbor + over this interface. This configuration is only applicable + for multiple-access networks"; + } + } + + grouping ospfv2-area-interface-neighbor-state { + description + "Operational state parameters relating an individual neighbor + system on an interface within an OSPF area"; + + leaf priority { + type uint8; + description + "The remote system's priority to become the designated + router"; + } + + leaf dead-time { + // rjs TODO: discussion with aashaikh@ + hines@ around how this + // value should be represented, usually is a timer that + // continually counts down but this sounds challenging for + // telemetry. + type oc-types:timeticks64; + description + "The time at which this neighbor's adjacency will be + considered dead. This value is expressed as a number of + seconds since the Unix Epoch"; + } + + leaf designated-router { + type yang:dotted-quad; + description + "The designated router for the adjacency. This device + advertises the Network LSA for broadcast and NBMA networks."; + } + + leaf backup-designated-router { + type yang:dotted-quad; + description + "The backup designated router for the adjacency."; + } + + leaf optional-capabilities { + // rjs TODO: should this be anything more than the hex-string + // this is currently what is shown in IOS/JUNOS + type yang:hex-string; + description + "The optional capabilities field received in the Hello + message from the neighbor"; + } + + leaf last-established-time { + type oc-types:timeticks64; + units seconds; + // rjs TODO: check implementations - is FULL considered 'up' + // since the adjacency is probably up since ExStart + description + "The time at which the adjacency was last established with + the neighbor. That is to say the time at which the + adjacency last transitioned into the FULL state. + + This value is expressed as the number of seconds, relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf adjacency-state { + type identityref { + base "oc-ospf-types:OSPF_NEIGHBOR_STATE"; + } + description + "The state of the adjacency with the neighbor."; + } + + leaf state-changes { + type uint32; + description + "The number of transitions out of the FULL state that this + neighbor has been through"; + } + + leaf retranmission-queue-length { + type uint32; + description + "The number of LSAs that are currently in the queue to be + retransmitted to the neighbor"; + } + } + + grouping ospfv2-area-interface-lsa-filter-config { + description + "Configuration options relating to filtering LSAs + on an interface."; + + leaf all { + type boolean; + description + "When this leaf is set to true, all LSAs should be + filtered to the neighbours with whom adjacencies are + formed on the interface."; + } + + // NB: this container can be augmented to add additional + // filtering options which exist in some implementations. + } + + grouping ospfv2-area-interface-mpls-igp-ldp-sync-state { + description + "Operational state parameters relating to MPLS LDP/IGP + synchronization on a per-neighbor basis"; + + leaf synchronized { + type boolean; + description + "When the value of this leaf is set to true, the + LDP neighbors reachable via this interface are considered + to be synchronized, and hence the link is considered + usable by the IGP."; + } + } + + grouping ospfv2-area-interfaces-structure { + description + "Structural grouping for configuration and operational state + parameters that relate to an interface"; + + container interfaces { + description + "Enclosing container for a list of interfaces enabled within + this area"; + + list interface { + key "id"; + + description + "List of interfaces which are enabled within this area"; + + leaf id { + type leafref { + path "../config/id"; + } + description + "A pointer to the identifier for the interface."; + } + + container config { + description + "Configuration parameters for the interface on which + OSPFv2 is enabled"; + + uses ospfv2-area-interface-config; + } + + container state { + config false; + description + "Operational state parameters for the interface on which + OSPFv2 is enabled"; + uses ospfv2-area-interface-config; + } + + uses oc-if:interface-ref; + + container timers { + description + "Timers relating to OSPFv2 on the interface"; + + container config { + description + "Configuration parameters for OSPFv2 timers on the + interface"; + uses ospfv2-area-interface-timers-config; + } + + container state { + config false; + description + "Operational state parameters for OSPFv2 timers on + the interface"; + + uses ospfv2-area-interface-timers-config; + } + } + + container mpls { + description + "Configuration and operational state parameters for + OSPFv2 extensions related to MPLS on the interface."; + + container config { + description + "Configuration parameters for OSPFv2 extensions relating + to MPLS for the interface"; + uses ospfv2-area-interface-mpls-config; + } + + container state { + config false; + description + "Operational state for OSPFv2 extensions relating to + MPLS for the interface"; + uses ospfv2-area-interface-mpls-config; + } + + container igp-ldp-sync { + description + "OSPFv2 parameters relating to LDP/IGP synchronization"; + + container config { + description + "Configuration parameters relating to LDP/IG + synchronization."; + uses ospfv2-common-mpls-igp-ldp-sync-config; + } + + container state { + config false; + description + "Operational state variables relating to LDP/IGP + synchronization"; + uses ospfv2-common-mpls-igp-ldp-sync-config; + uses ospfv2-area-interface-mpls-igp-ldp-sync-state; + } + } + } + + container lsa-filter { + description + "OSPFv2 parameters relating to filtering of LSAs to + neighbors the specified interface."; + + container config { + description + "Configuration parameters relating to filtering LSAs + on the specified interface."; + uses ospfv2-area-interface-lsa-filter-config; + } + + container state { + config false; + description + "Operational state parameters relating to filtering + LSAs on the specified interface"; + uses ospfv2-area-interface-lsa-filter-config; + } + } + + container neighbors { + description + "Enclosing container for the list of neighbors that + an adjacency has been established with on the interface"; + + list neighbor { + key "router-id"; + + description + "A neighbor with which an OSPFv2 adjacency has been + established within this area"; + + leaf router-id { + type leafref { + path "../config/router-id"; + } + description + "Reference to the router ID of the adjacent system"; + } + + container config { + description + "Configuration parameters relating to the adjacent + system"; + uses ospfv2-area-interface-neighbor-config; + } + + container state { + config false; + description + "Operational state parameters relating to the adjacent + system"; + uses ospfv2-area-interface-neighbor-config; + uses ospfv2-area-interface-neighbor-state; + } + } + } + + } + } + } + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-ospfv2-area.yang b/src/plugins/yang/openconfig/openconfig-ospfv2-area.yang new file mode 100644 index 0000000..2ee4ab4 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospfv2-area.yang @@ -0,0 +1,169 @@ +submodule openconfig-ospfv2-area { + + belongs-to openconfig-ospfv2 { + prefix "oc-ospfv2"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-ospf-types { prefix "oc-ospf-types"; } + import ietf-inet-types { prefix "inet"; } + + // include other required submodules + include openconfig-ospfv2-area-interface; + include openconfig-ospfv2-lsdb; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule provides OSPFv2 configuration and operational + state parameters that are specific to the area context"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospfv2-area-config { + description + "Configuration parameters relating to an OSPF area"; + + leaf identifier { + type oc-ospf-types:ospf-area-identifier; + description + "An identifier for the OSPFv2 area - described as either a + 32-bit unsigned integer, or a dotted-quad"; + } + } + + grouping ospfv2-area-mpls-config { + description + "Configuration parameters relating to OSPFv2 extensions for + MPLS"; + + leaf traffic-engineering-enabled { + type boolean; + description + "Specifies whether traffic engineering extensions should be + advertised within the area"; + } + } + + grouping ospfv2-area-virtual-link-config { + description + "Configuration parameters relating to a virtual-link within + the OSPF area"; + + leaf remote-router-id { + type inet:ipv4-address-no-zone; + description + "The router ID of the device which terminates the remote end + of the virtual link"; + } + } + + grouping ospfv2-area-structure { + description + "Structural grouping for configuration and operational state + parameters that relate to an individual area"; + + container config { + description + "Configuration parameters relating to an OSPFv2 area"; + + uses ospfv2-area-config; + } + + container state { + config false; + description + "Operational state parameters relating to an OSPFv2 area"; + uses ospfv2-area-config; + } + + container mpls { + description + "Configuration and operational state parameters for OSPFv2 + extensions relating to MPLS"; + + container config { + description + "Configuration parameters relating to MPLS extensions for + OSPFv2"; + uses ospfv2-area-mpls-config; + } + + container state { + config false; + description + "Operational state parameters relating to MPLS extensions + for OSPFv2"; + uses ospfv2-area-mpls-config; + } + } + + uses ospfv2-lsdb-structure; + uses ospfv2-area-interfaces-structure; + + container virtual-links { + description + "Configuration and state parameters relating to virtual + links from the source area to a remote router"; + + list virtual-link { + key "remote-router-id"; + + description + "Configuration and state parameters relating to a + virtual link"; + + leaf remote-router-id { + type leafref { + path "../config/remote-router-id"; + } + description + "Reference to the remote router ID"; + } + + container config { + description + "Configuration parameters relating to the OSPF virtual link"; + uses ospfv2-area-virtual-link-config; + } + + container state { + config false; + description + "State parameters relating to the OSPF virtual link"; + uses ospfv2-area-virtual-link-config; + uses ospfv2-area-interface-neighbor-state; + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-ospfv2-common.yang b/src/plugins/yang/openconfig/openconfig-ospfv2-common.yang new file mode 100644 index 0000000..12df35e --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospfv2-common.yang @@ -0,0 +1,91 @@ +submodule openconfig-ospfv2-common { + + belongs-to openconfig-ospfv2 { + prefix "oc-ospfv2"; + } + + import openconfig-extensions { prefix "oc-ext"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule provides OSPFv2 configuration and operational + state parameters that are shared across multiple contexts"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospfv2-common-mpls-igp-ldp-sync-config { + description + "Configuration parameters used for OSPFv2 MPLS/IGP + synchronization"; + + leaf enabled { + type boolean; + description + "When this leaf is set to true, do not utilise this link for + forwarding via the IGP until such time as LDP adjacencies to + the neighbor(s) over the link are established."; + } + + leaf post-session-up-delay { + type uint32; + units milliseconds; + description + "This leaf specifies a delay, expressed in units of milliseconds, + between the LDP session to the IGP neighbor being established, and + it being considered synchronized by the IGP."; + } + } + + grouping ospfv2-common-timers { + description + "Common definition of the type of timers that the OSPFv2 implementation + uses"; + + leaf timer-type { + type enumeration { + enum LINEAR_BACKOFF { + description + "The backoff used by the OSPFv2 implementation is linear, such that + a common delay is added following each event."; + } + enum EXPONENTIAL_BACKOFF { + description + "The backoff used by the OSPFv2 implementation is exponential, such + that the delay added following each event increases."; + } + } + description + "The timer mode that is utilised by the implementation."; + } + } +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-ospfv2-global.yang b/src/plugins/yang/openconfig/openconfig-ospfv2-global.yang new file mode 100644 index 0000000..6e82c9a --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospfv2-global.yang @@ -0,0 +1,509 @@ +submodule openconfig-ospfv2-global { + + belongs-to openconfig-ospfv2 { + prefix "oc-ospfv2"; + } + + import ietf-yang-types { prefix "yang"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-routing-policy { prefix "oc-rpol"; } + import openconfig-ospf-types { prefix "oc-ospft"; } + + // Include common submodule + include openconfig-ospfv2-common; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule provides OSPFv2 configuration and operational + state parameters that are global to a particular OSPF instance"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospfv2-global-config { + description + "Global configuration for OSPFv2"; + + leaf router-id { + type yang:dotted-quad; + description + "A 32-bit number represented as a dotted quad assigned to + each router running the OSPFv2 protocol. This number should + be unique within the autonomous system"; + reference "rfc2828"; + } + + leaf summary-route-cost-mode { + type enumeration { + enum RFC1583_COMPATIBLE { + description + "Specify that summary routes should assume the cost of + the lowest-cost more-specific route as per the behaviour + specified in RFC1583"; + } + enum RFC2328_COMPATIBLE { + description + "Specify that summary routes should assume the cost of the + highest-cost more-specific route as per the revised + behaviour specified in RFC2328"; + } + } + default "RFC2328_COMPATIBLE"; + description + "Specify how costs for the summary routes should be specified + as per the behaviour in the original OSPF specification + RFC1583, or alternatively whether the revised behaviour + described in RFC2328 should be utilised"; + } + + leaf igp-shortcuts { + type boolean; + description + "When this leaf is set to true, OSPFv2 will route traffic to + a remote system via any LSP to the system that is marked as + shortcut eligible."; + } + + leaf log-adjacency-changes { + type boolean; + description + "When this leaf is set to true, a log message will be + generated when the state of an OSPFv2 neighbour changes."; + } + + leaf hide-transit-only-networks { + type boolean; + description + "When this leaf is set to true, do not advertise prefixes + into OSPFv2 that correspond to transit interfaces, as per + the behaviour discussed in RFC6860."; + reference + "RFC6860 - Hiding Transit-Only Networks in OSPF"; + } + } + + grouping ospfv2-global-spf-timers-config { + description + "Configuration parameters relating to global SPF timer + parameters for OSPFv2"; + + leaf initial-delay { + // rjs TODO: IS-IS model has this as decimal64 - should it be + // that or uint32 msec? + type uint32; + units msec; + description + "The value of this leaf specifies the time between a change + in topology being detected and the first run of the SPF + algorithm."; + } + + leaf maximum-delay { + // rjs TODO: same question as above + type uint32; + units msec; + description + "The value of this leaf specifies the maximum delay between + a topology change being detected and the SPF algorithm + running. This value is used for implementations that support + increasing the wait time between SPF runs."; + } + + // rjs TODO: some questions here around what we should specify: + // JUNOS has rapid-runs and holddown + // Cisco has maximum time between runs, and then a doubling of + // the wait interval up to that maximum. + // ALU has first-wait, second-wait, max-wait + } + + grouping ospfv2-global-lsa-generation-timers-config { + description + "Configuration parameters relating to global LSA generation + parameters for OSPFv2"; + + leaf initial-delay { + type uint32; + units msec; + description + "The value of this leaf specifies the time between the first + time an LSA is generated and advertised and the subsequent + generation of that LSA."; + } + + leaf maximum-delay { + type uint32; + units msec; + description + "The value of this leaf specifies the maximum time between the + generation of an LSA and the subsequent re-generation of that + LSA. This value is used in implementations that support + increasing delay between generation of an LSA"; + } + } + + grouping ospfv2-global-spf-timers-state { + description + "Operational state parameters relating to OSPFv2 global + timers"; + + uses ospfv2-common-timers; + } + + grouping ospfv2-global-lsa-generation-timers-state { + description + "Operational state parameters relating to OSPFv2 global + timers"; + + uses ospfv2-common-timers; + } + + grouping ospfv2-global-graceful-restart-config { + description + "Configuration parameters relating to graceful restart for + OSPFv2"; + + leaf enabled { + type boolean; + description + "When the value of this leaf is set to true, graceful restart + is enabled on the local system. In this case, the system will + use Grace-LSAs to signal that it is restarting to its + neighbors."; + } + + leaf helper-only { + type boolean; + description + "Operate graceful-restart only in helper mode. When this leaf + is set to true, the local system does not use Grace-LSAs to + indicate that it is restarting, but will accept Grace-LSAs + from remote systems, and suppress withdrawl of adjacencies + of the system for the grace period specified"; + } + } + + grouping ospfv2-global-mpls-config { + description + "Configuration parameters for OSPFv2 options which + relate to MPLS"; + + leaf traffic-engineering-extensions { + type boolean; + description + "When this leaf is set to true, use traffic engineering + extensions for OSPF to advertise TE parameters via type 10 + Opaque LSAs"; + } + } + + grouping ospfv2-global-inter-areapp-config { + description + "Configuration parameters for OSPFv2 policies which propagate + prefixes between areas"; + + leaf src-area { + type leafref { + // we are at ospf/global/inter-area-propagation-policies/... + // inter-area-propagation-policy/config/src-area + path "../../../../../areas/area/identifier"; + } + description + "The area from which prefixes are to be exported."; + } + + leaf dst-area { + type leafref { + // we are at ospf/global/inter-area-propagation-policies/... + // inter-area-propagation-policy/config/src-area + path "../../../../../areas/area/identifier"; + } + description + "The destination area to which prefixes are to be imported"; + } + + uses oc-rpol:apply-policy-import-config; + } + + grouping ospfv2-global-max-metric-config { + description + "Configuration paramters relating to setting the OSPFv2 + maximum metric."; + + leaf set { + type boolean; + description + "When this leaf is set to true, all non-stub interfaces of + the local system are advertised with the maximum metric, + such that the router does not act as a transit system, + (similarly to the IS-IS overload functionality)."; + reference + "RFC3137 - OSPF Stub Router Advertisement"; + } + + leaf timeout { + type uint64; + units "seconds"; + description + "The delay, in seconds, after which the advertisement of + entities with the maximum metric should be cleared, and + the system reverts to the default, or configured, metrics."; + } + + leaf-list include { + type identityref { + base "oc-ospft:MAX_METRIC_INCLUDE"; + } + description + "By default, the maximum metric is advertised for all + non-stub interfaces of a device. When identities are + specified within this leaf-list, additional entities + are also advertised with the maximum metric according + to the values within the list."; + } + + leaf-list trigger { + type identityref { + base "oc-ospft:MAX_METRIC_TRIGGER"; + } + description + "By default, the maximum metric is only advertised + when the max-metric/set leaf is specified as true. + In the case that identities are specified within this + list, they provide additional triggers (e.g., system + boot) that may cause the max-metric to be set. In this + case, the system should still honour the timeout specified + by the max-metric/timeout leaf, and clear the max-metric + advertisements after the expiration of this timer."; + } + } + + grouping ospfv2-global-structural { + description + "Top level structural grouping for OSPFv2 global parameters"; + + container global { + description + "Configuration and operational state parameters for settings + that are global to the OSPFv2 instance"; + + container config { + description + "Global configuration parameters for OSPFv2"; + uses ospfv2-global-config; + } + + container state { + config false; + description + "Operational state parameters for OSPFv2"; + uses ospfv2-global-config; + } + + container timers { + description + "Configuration and operational state parameters for OSPFv2 + timers"; + + container spf { + description + "Configuration and operational state parameters relating + to timers governing the operation of SPF runs"; + + container config { + description + "Configuration parameters relating to global OSPFv2 + SPF timers"; + uses ospfv2-global-spf-timers-config; + } + + container state { + config false; + description + "Operational state parameters relating to the global + OSPFv2 SPF timers"; + uses ospfv2-global-spf-timers-config; + uses ospfv2-global-spf-timers-state; + } + } + + container max-metric { + description + "Configuration and operational state parameters relating + to setting the OSPFv2 maximum metric."; + + container config { + description + "Configuration parameters relating to setting the OSPFv2 + maximum metric for a set of advertised entities."; + uses ospfv2-global-max-metric-config; + } + + container state { + config false; + description + "Operational state parameters relating to setting the + OSPFv2 maximum metric for a set of advertised entities."; + uses ospfv2-global-max-metric-config; + } + } + + container lsa-generation { + description + "Configuration and operational state parameters relating + to timers governing the generation of LSAs by the local + system"; + + container config { + description + "Configuration parameters relating to the generation of + LSAs by the local system"; + uses ospfv2-global-lsa-generation-timers-config; + } + + container state { + config false; + description + "Operational state parameters relating to the generation + of LSAs by the local system"; + uses ospfv2-global-lsa-generation-timers-config; + uses ospfv2-global-lsa-generation-timers-state; + } + } + } + + container graceful-restart { + description + "Configuration and operational state parameters for OSPFv2 + graceful restart"; + + container config { + description + "Configuration parameters relating to OSPFv2 graceful + restart"; + uses ospfv2-global-graceful-restart-config; + } + + container state { + config false; + description + "Operational state parameters relating to OSPFv2 graceful + restart"; + uses ospfv2-global-graceful-restart-config; + } + } + + container mpls { + description + "OSPFv2 parameters relating to MPLS"; + + container config { + description + "Configuration parameters relating to MPLS for OSPFv2"; + uses ospfv2-global-mpls-config; + } + + container state { + config false; + description + "Operational state parameters relating to MPLS for + OSPFv2"; + uses ospfv2-global-mpls-config; + } + + container igp-ldp-sync { + description + "OSPFv2 parameters relating to LDP/IGP synchronization"; + + container config { + description + "Configuration parameters relating to LDP/IG + synchronization."; + uses ospfv2-common-mpls-igp-ldp-sync-config; + } + + container state { + config false; + description + "Operational state variables relating to LDP/IGP + synchronization"; + uses ospfv2-common-mpls-igp-ldp-sync-config; + } + } + } + + container inter-area-propagation-policies { + description + "Policies defining how inter-area propagation should be performed + by the OSPF instance"; + + list inter-area-propagation-policy { + key "src-area dst-area"; + description + "A list of connections between pairs of areas - routes are + propagated from the source (src) area to the destination (dst) + area according to the policy specified"; + + leaf src-area { + type leafref { + path "../config/src-area"; + } + description + "Reference to the source area"; + } + + leaf dst-area { + type leafref { + path "../config/dst-area"; + } + description + "Reference to the destination area"; + } + + container config { + description + "Configuration parameters relating to the inter-area + propagation policy"; + uses ospfv2-global-inter-areapp-config; + } + + container state { + config false; + description + "Operational state parameters relating to the inter-area + propagation policy"; + uses ospfv2-global-inter-areapp-config; + } + } + } + } + } +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-ospfv2-lsdb.yang b/src/plugins/yang/openconfig/openconfig-ospfv2-lsdb.yang new file mode 100644 index 0000000..b345724 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospfv2-lsdb.yang @@ -0,0 +1,2355 @@ +submodule openconfig-ospfv2-lsdb { + + belongs-to openconfig-ospfv2 { + prefix "oc-ospfv2"; + } + + // import some basic types + import ietf-yang-types { prefix "yang"; } + import ietf-inet-types { prefix "inet"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-ospf-types { prefix "oc-ospf-types"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "An OpenConfig model for the Open Shortest Path First (OSPF) + version 2 link-state database (LSDB)"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospfv2-lsdb-common-prefix-properties { + description + "Common properties used in the LSDB that relate to IPv4 prefixes"; + + leaf prefix-length { + type uint8 { + range "0..32"; + } + description + "The length of the IPv4 prefix contained in the Extended Prefix LSA"; + } + + leaf address-family { + // TODO: should this be an identity? + type enumeration { + enum IPV4_UNICAST { + value 0; + description + "The prefix contained within the Extended Prefix LSA is an IPv4 + unicast prefix"; + } + } + description + "The address family of the prefix contained in the Extended Prefix + LSA"; + } + } + + grouping ospfv2-lsdb-common-link-specification { + description + "Generic attributes used to identify links within OSPFv2"; + + leaf link-id { + type yang:dotted-quad; + description + "The identifier for the link specified. The value of the link + identifier is dependent upon the type of the LSA. The value is + specified to be, per sub-type: + 1) Neighbouring router's router ID. + 2) IP address of DR. + 3) IP network address. + 4) Neighbouring router router's ID."; + } + + leaf link-data { + type union { + type yang:dotted-quad; + type uint32; + } + description + "The data associated with the link type. The value is + dependent upon the subtype of the LSA. When the connection is + to a stub network it represents the mask; for p2p connections + that are unnumbered it represents the ifIndex value of the + router's interface; for all other connections it represents + the local system's IP address"; + } + + } + + grouping ospfv2-lsdb-common-unknown-tlv { + description + "A generic specification of a TLV to be used when the + value cannot be decoded by the local system"; + + leaf type { + type uint16; + description + "The type value of the unknown TLV"; + } + + leaf length { + type uint16; + description + "The length value of the unknown TLV"; + } + + leaf value { + type binary; + description + "The value portion of the unknwon TLV"; + } + } + + grouping ospfv2-lsdb-common-unknown-tlv-structure { + description + "A generic specification of an unknown TLV"; + + container unknown-tlv { + description + "An unknown TLV within the context. Unknown TLVs are + defined to be the set of TLVs that are not modelled + within the OpenConfig model, or are unknown to the + local system such that it cannot decode their value."; + + container state { + description + "Contents of an unknown TLV within the LSA"; + uses ospfv2-lsdb-common-unknown-tlv; + } + } + } + + grouping ospfv2-lsdb-common-unknown-subtlv-structure { + description + "A generic specification of an unknown TLV"; + + container unknown-subtlv { + description + "An unknown SubTLV within the context. Unknown Sub-TLV + are defined to be the set of SubTLVs that are not modelled + by the OpenConfig schema, or are unknown to the local system + such that it cannot decode their value."; + + container state { + description + "Contents of an unknown TLV within the LSA"; + uses ospfv2-lsdb-common-unknown-tlv; + } + } + } + + grouping ospfv2-lsdb-common-tos-metric { + description + "Common LSDB LSA parameters for type of service and metric"; + + leaf tos { + type uint8; + description + "OSPF encoding of the type of service referred to by this + LSA. Encoding for OSPF TOS are described in RFC2328."; + } + + leaf metric { + type oc-ospf-types:ospf-metric; + description + "The metric value to be used for the TOS specified. This value + represents the cost of use of the link for the specific type + of service."; + } + } + + grouping ospfv2-lsdb-common-sr-sid-spec { + description + "Re-usable specification of a segment routing SID"; + + leaf sid-type { + type oc-ospf-types:sr-sid-type; + description + "The type of the value contained within the sub-TLV"; + } + + leaf sid-value { + type uint32; + description + "The value of the binding included within the sub-TLV. The type of + this binding is indicated by the type leaf."; + } + } + + grouping ospfv2-lsdb-area-state { + description + "Per-area operational state parameters for an OSPFv2 area"; + + leaf identifier { + type oc-ospf-types:ospf-area-identifier; + description + "An identifier for the area, expressed as a dotted quad or + an unsigned 32-bit integer"; + } + } + + grouping ospfv2-lsdb-area-lsa-type-state { + description + "Per-LSA type operational state parameters for an OSPFv2 area"; + + leaf type { + type identityref { + base "oc-ospf-types:OSPF_LSA_TYPE"; + } + description + "The type of LSA being described. The type of the LSA is + expressed as a canonical name."; + } + } + + grouping ospfv2-lsdb-area-lsa-state { + description + "Generic parameters of an OSPFv2 LSA"; + + leaf link-state-id { + type yang:dotted-quad; + description + "The Link State ID for the specified LSA type. The exact + defined value of the Link State ID is dependent on the LSA + type."; + } + + leaf advertising-router { + type yang:dotted-quad; + description + "The router ID of the router that originated the LSA"; + } + + leaf sequence-number { + type int32; + description + "A signed 32-bit integer used to detect old and duplicate + LSAs. The greater the sequence number the more recent the + LSA."; + } + + leaf checksum { + type uint16; + description + "The checksum of the complete contents of the LSA excluding + the age field."; + } + + leaf age { + type uint16; + units seconds; + description + "The time since the LSA's generation in seconds"; + } + } + + grouping ospfv2-lsdb-router-lsa-structure { + description + "Structural grouping for Router LSA contents within the LSDB"; + + container router-lsa { + description + "Contents of the router LSA"; + + container state { + description + "State parameters of the router LSA"; + uses ospfv2-lsdb-router-lsa-state; + } + + uses ospfv2-lsdb-generic-lsa-tos-metric-structure; + } + } + + grouping ospfv2-lsdb-generic-lsa-tos-metric-structure { + description + "Grouping including a generic TOS/metric structure for an + LSA"; + + container types-of-service { + description + "Breakdown of LSA contents specifying multiple + TOS values"; + + list type-of-service { + key "tos"; + description + "Per-type of service parameters for the LSA"; + + leaf tos { + type leafref { + path "../state/tos"; + } + description + "Reference to the type of service identifier which is + specified in the LSA"; + } + + container state { + description + "Per-TOS parameters for the LSA"; + + uses ospfv2-lsdb-generic-lsa-tos-metric-state; + } + } + } + } + + grouping ospfv2-lsdb-network-lsa-structure { + description + "Structural grouping for Network LSA contents within the LSDB"; + + container network-lsa { + description + "Contents of the network LSA"; + + container state { + description + "State parameters of the network LSA"; + uses ospfv2-lsdb-network-lsa-state; + } + } + } + + grouping ospfv2-lsdb-summary-lsa-structure { + description + "Structural grouping for the Summary LSA contents within the + LSDB"; + + container summary-lsa { + description + "Contents of the summary LSA"; + + container state { + description + "State parameters of the summary LSA"; + uses ospfv2-lsdb-summary-lsa-state; + } + + uses ospfv2-lsdb-generic-lsa-tos-metric-structure; + } + } + + grouping ospfv2-lsdb-asexternal-lsa-structure { + description + "Structural grouping for the AS External LSA contents within + the LSDB"; + + container as-external-lsa { + description + "Contents of the AS External LSA"; + + container state { + description + "State parameters for the AS external LSA"; + uses ospfv2-lsdb-asexternal-lsa-state; + } + + container types-of-service { + description + "Breakdown of External LSA contents specifying multiple + TOS values"; + + list type-of-service { + key "tos"; + description + "Per-type of service parameters for the AS External LSA"; + + leaf tos { + type leafref { + path "../state/tos"; + } + description + "Reference to the type of service identifier which is + specified in the AS External LSA"; + } + + container state { + description + "Per-TOS parameters for the LSA"; + + uses ospfv2-lsdb-asexternal-tos-state; + } + } + } + + } + } + + grouping ospfv2-lsdb-nssa-external-lsa-structure { + description + "Structural grouping for the NSSA External LSA contents within + the LSDB"; + + container nssa-external-lsa { + description + "Contents of the NSSA External LSA"; + + container state { + description + "State parameters for the AS external LSA"; + // Type 7 LSAs are are a super-set of Type 5 LSAs so we simply + // include the Type 5 + uses ospfv2-lsdb-asexternal-lsa-state; + uses ospfv2-lsdb-nssa-external-lsa-state; + } + + container types-of-service { + description + "Breakdown of the NSSA External LSA contents specifying multiple + TOS values"; + + list type-of-service { + key "tos"; + description + "Per-type of service parameters for the NSSA external LSA"; + + leaf tos { + type leafref { + path "../state/tos"; + } + description + "Reference to the type of services identifier which is specified + in the NSSA External LSA"; + } + + container state { + description + "Per-TOS parameters for the LSA"; + uses ospfv2-lsdb-asexternal-tos-state; + } + } + } + } + } + + grouping ospfv2-lsdb-opaque-lsa-structure { + description + "Structural grouping for Opaque LSA contents within the LSDB"; + + container opaque-lsa { + description + "Contents of the opaque LSA"; + + container state { + description + "State parameters for the opaque LSA"; + uses ospfv2-lsdb-opaque-lsa-state; + } + + container traffic-engineering { + when "../state/type = 'TRAFFIC_ENGINEERING'" { + description + "Include the traffic-engineering information when + the Opaque LSA being described is a Traffic Engineering + LSA"; + } + description + "Contents of the Traffic Engineering Opaque LSA"; + + container tlvs { + description + "The TLVs contained in the TE Opaque LSA"; + list tlv { + // this is an unkeyed list + description + "The Type-Length-Value tuples included in the TE LSA"; + + container state { + description + "The contents of the TLV tuple within the TE LSA"; + uses ospfv2-lsdb-opaque-lsa-te-tlv-state; + } + + uses ospfv2-lsdb-common-unknown-tlv-structure; + + container router-address { + when "../state/type = 'TE_ROUTER_ADDRESS'" { + description + "Include the router address container only when the type + of the TLV is Router Address"; + } + + description + "Parameters included in the Router Address TLV"; + + container state { + description + "State parameters of the router address TLV"; + uses ospfv2-lsdb-opaque-te-router-address-state; + } + } + + container link { + when "../state/type = 'TE_ROUTER_LINK'" { + description + "Include the link container only when the type of the + TLV describes a traffic engineering link"; + } + + description + "Parameters included in the Link TLV"; + container sub-tlvs { + description + "Sub-TLVs included in the Link TLV"; + + list sub-tlv { + // unkeyed list + description + "The Sub-TLVs included within the Traffic Engineering + LSA's sub-TLV"; + + container state { + description + "State parameters of the Link Sub-TLV"; + + uses ospfv2-lsdb-opaque-te-link-state; + } + + uses ospfv2-lsdb-common-unknown-subtlv-structure; + + container unreserved-bandwidths { + description + "The unreserved link bandwidths for the Traffic + Engineering LSA - utilised when the sub-TLV type + indicates that the sub-TLV describes unreserved + bandwidth"; + + list unreserved-bandwidth { + key "priority"; + + description + "The unreserved bandwidth at each priority level"; + + leaf priority { + type leafref { + path "../state/priority"; + } + description + "A reference to the priority level being described"; + } + + container state { + description + "State parameters relating to the unreserved + bandwidth of the link being described"; + uses ospfv2-lsdb-opaque-te-link-unreserved-bw-state; + } + } + } + + container administrative-groups { + description + "The administrative groups that are set for the + Traffic Engineering LSA - utilised when the sub-TLV type + indicates that the sub-TLV describes administrative + groups"; + + list admin-group { + key "bit-index"; + + description + "The administrative group described within the + sub-TLV"; + + leaf bit-index { + type leafref { + path "../state/bit-index"; + } + description + "A reference to the bit index being described"; + } + + container state { + description + "State parameters relating to the administrative + groups being described for the link"; + uses ospfv2-lsdb-opaque-te-link-admin-group-state; + } + } + } + } + } + } + + container node-attribute { + when "../state/type = 'TE_NODE_ATTRIBUTE'" { + description + "Include the node-attribute container only when the type of + the TLV describes a node attribute"; + } + + description + "Parameters included in the Node Attribute TLV"; + + container sub-tlvs { + description + "Sub-TLVs of the Node Attribute TLV of the Traffic + Engineering LSA"; + + list sub-tlv { + // unkeyed list + description + "List of the Sub-TLVs contained within the Node Attribute + TLV"; + + container state { + description + "State parameters of the Node Attribute TLV sub-TLV"; + uses ospfv2-lsdb-opaque-te-node-attribute-state; + } + + uses ospfv2-lsdb-common-unknown-subtlv-structure; + } + } + } + + // A set of TLVs are omitted here - based on operational + // requirements, these are: + // * link-local + // * ipv6-address (OSPFv3 only) + // * optical-node-property + } + } + } // traffic-engineering + + container grace-lsa { + when "../state/type = 'GRACE_LSA'" { + description + "Include the grace-lsa container when the opaque LSA is specified + to be of that type."; + } + + description + "The Grace LSA is utilised when a remote system is undergoing + graceful restart"; + + container tlvs { + description + "TLVs of the Grace LSA"; + + list tlv { + description + "TLV entry in the Grace LSA, advertised by a system undergoing + graceful restart"; + + // unkeyed list + container state { + description + "Per-TLV state parameters of the Grace LSA"; + uses ospfv2-lsdb-opaque-grace-state; + } + uses ospfv2-lsdb-common-unknown-tlv-structure; + } + } + } // grace LSA + + container router-information { + when "../state/type = 'ROUTER_INFORMATION_LSA'" { + description + "Include the router-information container when the opaque LSA + type is specified to be an RI LSA"; + } + + description + "The router information LSA is utilised to advertise capabilities + of a system to other systems who receive the LSA"; + + container tlvs { + description + "The TLVs included within the Router Information LSA."; + + list tlv { + description + "TLV entry in the Router Information LSA"; + + // unkeyed list + container state { + description + "Per-TLV state parameters of the RI LSA"; + uses ospfv2-lsdb-opaque-ri-state; + } + + uses ospfv2-lsdb-common-unknown-tlv-structure; + + container informational-capabilities { + when "../state/type = 'RI_INFORMATIONAL_CAPABILITIES'" { + description + "Include the informational capabilities specification when + the TLV of the RI LSA is specified to be of this type"; + } + + description + "Information related to the capabilities of the advertising + router within the scope that the opaque RI LSA is being + advertised"; + + container state { + description + "State parameters of the informational capabilitis of the + RI LSA"; + uses ospfv2-lsdb-opaque-ri-informational-state; + } + } + + container node-administrative-tags { + when "../state/type = 'RI_NODE_ADMIN_TAG'" { + description + "Include the node administrative tags specification when + the TLV of the RI LSA is specified to be of this type"; + } + + description + "Per-node administrative tags associated with the local system + specified by the operator"; + + container state { + description + "State parameters of the node administrative tags advertised + in the RI LSA"; + uses ospfv2-lsdb-opaque-ri-admintag-state; + } + } + + container segment-routing-algorithm { + when "../state/type = 'RI_SR_ALGORITHM'" { + description + "Include the segment routing algorithm specific parameters when + the TLV of the RI LSA is specified to be of this type"; + } + + description + "The algorithms supported for Segment Routing by the local system"; + + container state { + description + "State parameters of the Segment Routing algorithm advertised in + the RI LSA"; + uses ospfv2-lsdb-opaque-ri-sralgo-state; + } + } + + container segment-routing-sid-label-range { + when "../state/type = 'RI_SR_SID_LABEL_RANGE'" { + description + "Include the segment routing SID/Label range TLV specific state when + the TLV of the RI LSA is specified to be of this type"; + } + + description + "The Segment Identifier (SID) or label ranges that are supported by + the local system for Segment Routing"; + + container tlvs { + description + "Sub-TLVs of the SID/Label range TLV of the RI LSA"; + + list tlv { + // unkeyed list + description + "Sub-TLVs of the SID/Label range TLV"; + + uses ospfv2-lsdb-common-unknown-tlv-structure; + + container state { + description + "State parameters of the sub-TLVs of the SR/Label range TLV"; + uses ospfv2-lsdb-opaque-ri-srrange-tlv-state; + } + + container sid-label { + description + "Sub-TLV used to advertise the SID or label associated with the + subset of the SRGB being advertised"; + + container state { + description + "State parameters of the SID/Label sub-TLV of the SR/Label + range TLV of the RI LSA"; + uses ospfv2-lsdb-opaque-ri-srrange-sid-label-tlv-state; + } + } + } + } + } + } + } + } // router-information + + container extended-prefix { + when "../state/type = 'OSPFV2_EXTENDED_PREFIX'" { + description + "Include the extended-prefix container when the opaque LSA + type is specified to be an extended prefix LSA"; + } + + description + "An OSPFv2 Extended Prefix Opaque LSA, used to encapsulate + TLV attributes associated with a prefix advertised in OSPF."; + + reference "RFC7684 - OSPFv2 Prefix/Link Attribute Advertisement"; + + container state { + description + "State parameters of the Extended Prefix LSA"; + uses ospfv2-lsdb-extended-prefix-state; + } + + container tlvs { + description + "TLVs contained within the Extended Prefix LSA"; + + list tlv { + // unkeyed list + description + "A TLV contained within the extended prefix LSA"; + + container state { + description + "State parameters relating to the sub-TLV of the extended + prefix LSA"; + uses ospfv2-lsdb-extended-prefix-tlv-state; + } + + container extended-prefix-range { + when "../state/type = 'EXTENDED_PREFIX_RANGE'" { + description + "Include the prefix range sub-TLV when the type of the + sub-TLV is specified as such"; + } + + description + "State parameters relating to the extended prefix range + sub-TLV of the extended prefix LSA"; + + container state { + description + "State parameters relating to the Extended Prefix Range + sub-TLV of the Extended Prefix LSA"; + uses ospfv2-lsdb-extended-prefix-range-state; + } + } + + container prefix-sid { + when "../state/type = 'PREFIX_SID'" { + description + "Include parameters relating to the Prefix SID when the type + of the sub-TLV is indicated as such"; + } + + description + "State parameters relating to the Prefix SID sub-TLV of the + extended prefix LSA"; + + container state { + description + "State parameters relating to the Prefix SID sub-TLV of the + extended prefix LSA"; + uses ospfv2-lsdb-extended-prefix-prefix-sid-state; + } + } // prefix-sid + + container sid-label-binding { + when "../state/type = 'SID_LABEL_BINDING'" { + description + "Include parameters relating to the SID/Label binding sub-TLV + only when the type is indicated as such"; + } + + description + "State parameters relating to the SID/Label binding sub-TLV + of the extended prefix LSA"; + + container state { + description + "State parameters relating to the SID/Label binding sub-TLV + of the extended prefix LSA"; + uses ospfv2-lsdb-extended-prefix-sid-label-binding-state; + } + + container tlvs { + description + "TLVs contained within the SID/Label Binding sub-TLV of the + SID/Label Binding TLV"; + + list tlv { + description + "A TLV contained within the SID/Label Binding sub-TLV"; + + container state { + description + "State parameters relating to the SID/Label Binding + sub-TLV"; + uses ospfv2-lsdb-extended-prefix-sid-label-binding-tlv-state; + } + + container sid-label-binding { + when "../state/type = 'SID_LABEL_BINDING'" { + description + "Include the SID/Label Binding sub-TLV parameters only + when the type is indicated as such"; + } + + description + "Parameters for the SID/Label Binding sub-TLV of the + SID/Label binding TLV"; + + container state { + description + "State parameteres relating to the SID/Label Binding + sub-TLV"; + uses ospfv2-lsdb-extprefix-sid-label-binding-state; + } + } // sid-label-binding + + container ero-metric { + when "../state/type = 'ERO_METRIC'" { + description + "Include the ERO Metric sub-TLV parameters only when + the type is indicated as such"; + } + + description + "Parameters for the ERO Metric Sub-TLV of the SID/Label + binding TLV"; + + container state { + description + "State parameters relating to the ERO Metric Sub-TLV of + the SID/Label binding TLV"; + uses ospfv2-lsdb-extprefix-sid-label-ero-metric-state; + } + } // ero-metric + + container ero-path { + when "../state/type = 'ERO_PATH'" { + description + "Include the ERO Path sub-TLV parameters only when the + type is indicated as such"; + } + + description + "Parameters for the ERO Path Sub-TLV of the SID/Label + binding TLV"; + + container segments { + description + "Segments of the path described within the SID/Label + Binding sub-TLV"; + + list segment { + description + "A segment of the path described within the sub-TLV"; + + container state { + description + "State parameters relating to the path segment + contained within the sub-TLV"; + uses ospfv2-lsdb-extprefix-sid-lbl-ero-path-seg-state; + } + + container ipv4-segment { + when "../state/type = 'IPV4_SEGMENT'" { + description + "Include the IPv4 segment only when the type is + indicated as such"; + } + + description + "Details of the IPv4 segment interface of the ERO"; + + container state { + description + "State parameters of the IPv4 segment of the ERO"; + uses ospfv2-lsdb-extprefix-sid-lbl-ero-ipv4-state; + } + } // ipv4-segment + + container unnumbered-hop { + when "../state/type = 'UNNUMBERED_INTERFACE_SEGMENT'" { + description + "Include the unnumbered segment only when the + type is indicated as such"; + } + + description + "Details of the unnumbered interface segment of the + ERO"; + + container state { + description + "State parameters of the unnumbered interface + segment of the ERO"; + uses ospfv2-lsdb-extprefix-sid-lbl-ero-unnum-state; + } + } // unnumbered-hop + } // tlv + } // tlvs + } + } + } + } // sid-label-binding + + uses ospfv2-lsdb-common-unknown-tlv-structure; + } + } + } // extended-prefix + + container extended-link { + description + "The OSPFv2 Extended Link Opaque LSA, used to encapsulate TLV + attributes associated with a link advertised in OSPF."; + + reference "RFC7684 - OSPFv2 Prefix/Link Attribute Advertisement"; + + container state { + description + "State parameters of the Extended Link LSA"; + uses ospfv2-lsdb-extended-link-state; + } + + container tlvs { + description + "TLVs contained within the Extended Link LSA"; + + list tlv { + description + "List of TLVs within the Extended Link LSA"; + + container state { + description + "State parameters relating to the sub-TLV of the extended link + LSA"; + uses ospfv2-lsdb-extended-link-tlv-state; + } + + uses ospfv2-lsdb-common-unknown-tlv-structure; + + container adjacency-sid { + when "../state/type = 'ADJACENCY_SID'" { + description + "Include the Adjacency SID parameters only when the type of + the sub-TLV is indicated as such"; + } + + description + "Parameters relating to an Adjacency SID sub-TLV of the + extended link LSA"; + + container state { + description + "State parameters relating to an Adjacency SID"; + + uses ospfv2-lsdb-extended-link-adj-sid-state; + } + } + } + } + + } // extended-link + + uses ospfv2-lsdb-common-unknown-tlv-structure; + } + } + + grouping ospfv2-lsdb-generic-lsa-tos-metric-state { + description + "Per-TOS state parameters for the Router LSA"; + + uses ospfv2-lsdb-common-tos-metric; + } + + grouping ospfv2-lsdb-router-lsa-state { + description + "Parameters of the router LSA"; + + leaf type { + type identityref { + base "oc-ospf-types:ROUTER_LSA_TYPES"; + } + description + "The sub-type of the Router LSA."; + } + + uses ospfv2-lsdb-common-link-specification; + + leaf metric { + type oc-ospf-types:ospf-metric; + description + "The cost of utilising the link specified independent of TOS"; + } + + leaf number-links { + type uint16; + description + "The number of links that are described within the LSA"; + } + + leaf number-tos-metrics { + type uint16; + description + "The number of different TOS metrics given for this link, not + including the link metric (which is referred to as TOS 0)."; + } + } + + grouping ospfv2-lsdb-network-lsa-state { + description + "Parameters of the Network LSA"; + + leaf network-mask { + type uint8 { + range "0..32"; + } + description + "The mask of the network described by the Network LSA + represented as a CIDR mask."; + } + + leaf-list attached-router { + type yang:dotted-quad; + description + "A list of the router ID of the routers that are attached to + the network described by the Network LSA"; + } + } + + grouping ospfv2-lsdb-summary-lsa-state { + description + "Parameters of the Summary LSA"; + + leaf network-mask { + type uint8 { + range "0..32"; + } + description + "The mask of the network described by the Summary LSA + represented as a CIDR mask."; + } + } + + grouping ospfv2-lsdb-asexternal-lsa-common-parameters { + description + "Common parameters that are used for OSPFv2 AS External LSAs"; + + leaf forwarding-address { + type inet:ipv4-address-no-zone; + description + "The destination to which traffic for the external prefix + should be advertised. When this value is set to 0.0.0.0 then + traffic should be forwarded to the LSA's originator"; + } + + leaf external-route-tag { + type uint32; + description + "An opaque tag that set by the LSA originator to carry + information relating to the external route"; + } + } + + grouping ospfv2-lsdb-asexternal-lsa-state { + description + "Parameters for the AS External LSA"; + + leaf mask { + type uint8 { + range "0..32"; + } + description + "The subnet mask for the advertised destination"; + } + + leaf metric-type { + type enumeration { + enum "TYPE_1" { + description + "When the metric of a prefix is specified as Type 1 + then it is considered to be expressed in the same units as + the link-state metrics carried in OSPF. That is to say + that the metric advertised is directly compared to the + internal cost"; + } + enum "TYPE_2" { + description + "When the metric of a prefix is specified as Type 2 then + it is considered to be expressed as a cost in addition to + that of the link-state metric to the advertising router. + That is to say that the metric is considered to be the + cost to the advertising router plus the advertised metric + for the external entity"; + } + } + description + "The type of metric included within the AS External LSA."; + } + + leaf metric { + type oc-ospf-types:ospf-metric; + description + "The cost to reach the external network specified. The exact + interpretation of this cost is dependent on the type of + metric specified"; + } + + uses ospfv2-lsdb-asexternal-lsa-common-parameters; + } + + grouping ospfv2-lsdb-asexternal-tos-state { + description + "Per-TOS parameters for the AS External LSA"; + + uses ospfv2-lsdb-asexternal-lsa-common-parameters; + uses ospfv2-lsdb-common-tos-metric; + } + + grouping ospfv2-lsdb-nssa-external-lsa-state { + description + "Operational state parameters specific to the NSSA External + LSA"; + + leaf propagate { + type boolean; + description + "When this bit is set to true, an NSSA border router will + translate a Type 7 LSA (NSSA External) to a Type 5 LSA + (AS External)."; + reference "RFC3101, Section 2.3"; + } + } + + grouping ospfv2-lsdb-opaque-lsa-state { + description + "Operational state parameters specific to an Opaque LSA"; + + leaf scope { + type enumeration { + enum LINK { + description + "The scope of the LSA is the current link. The LSA + is not flooded beyond the local network. This + enumeration denotes a Type 9 LSA."; + } + enum AREA { + description + "The scope of the LSA is the local area. The LSA + is not flooded beyond the area of origin. This + enumeration denotes a Type 10 LSA."; + } + enum AS { + description + "The scope of the LSA is the local autonomous + system (AS). The flooding domain is the same + as a Type 5 LSA - it is not flooded into + stub areas or NSSAs. This enumeration denotes a + Type 11 LSA."; + } + } + description + "The scope of the opaque LSA. The type of the LSA + indicates its scope - the value of this leaf + determines both the flooding domain, and the type + of the LSA."; + } + + leaf type { + type identityref { + base "oc-ospf-types:OSPF_OPAQUE_LSA_TYPE"; + } + description + "The Opaque Type of the LSA. This value is used to + indicate the type of data carried by the opaque LSA"; + } + } + + grouping ospfv2-lsdb-opaque-lsa-te-tlv-state { + description + "The contents of the Traffic Engineering LSA"; + + leaf type { + type identityref { + base "oc-ospf-types:OSPF_TE_LSA_TLV_TYPE"; + } + description + "The type of TLV within the Traffic Engineering LSA"; + } + } + + grouping ospfv2-lsdb-opaque-te-unknown-state { + description + "The contents of the unknown TLV within the Traffic Engineering LSA"; + + uses ospfv2-lsdb-common-unknown-tlv; + } + + grouping ospfv2-lsdb-opaque-te-link-state { + description + "The contents of the sub-TLVs of a Traffic Engineering LSA Link TLV"; + + leaf type { + type union { + type identityref { + base "oc-ospf-types:OSPF_TE_LINK_TLV_TYPE"; + } + type enumeration { + enum UNKNOWN { + description + "The sub-TLV received in the LSA is unknown to the local + system"; + } + } + } + description + "The sub-TLV type specified in the Link TLV. When the value is + known by the local system, a canonical name of the sub-TLV is utilised + - the special UNKNOWN value indicates that the system did not + support the sub-TLV type received in the LSA."; + } + + leaf unknown-type { + when "../type = 'UNKNOWN'" { + description + "Include the unknown type field only when the sub-TLV was not + known to the local system"; + } + + type uint16; + description + "The value of the type field of an unknown sub-TLV"; + } + + leaf unknown-value { + when "../type = 'UNKNOWN'" { + description + "Include the unknown value field only when the sub-TLV was not + known to the local system"; + } + + type binary; + description + "The binary contents of the unknown TLV"; + } + + leaf link-type { + when "../type = 'TE_LINK_TYPE'" { + description + "Include the link-type field only when the sub-TLV type was a TE + link type"; + } + + type enumeration { + enum POINT_TO_POINT { + description + "The link being described by the TE LSA Link sub-TLV is a + point-to-point link to exactly one other system"; + } + enum MULTI_ACCESS { + description + "The link being described by the TE LSA Link sub-TLV is a + multi-access link that supports connectivity to multiple remote + systems"; + } + enum UNKNOWN { + description + "The link type received was unknown to the local system"; + } + } + description + "The type of the link that is being described by the TE LSA Link + sub-TLV"; + } + + leaf link-id { + when "../type = 'TE_LINK_ID'" { + description + "Include the link ID field only when the sub-TLV type was a TE + Link identifier"; + } + + type yang:dotted-quad; + description + "The ID of the remote system. For point-to-point links, this is the + router ID of the neighbor. For multi-access links it is the address + of the designated router."; + } + + leaf-list local-ip-address { + when "../type = 'TE_LINK_LOCAL_IP'" { + description + "Include the local IP address field only when the sub-TLV type was + a local IP address"; + } + + type inet:ipv4-address-no-zone; + description + "The IP address(es) of the local system that correspond to the + specified TE link"; + } + + leaf-list remote-ip-address { + when "../type = 'TE_LINK_REMOTE_IP'" { + description + "Include the remote IP address field only when the sub-TLV type was + a remote IP address"; + } + + type inet:ipv4-address-no-zone; + description + "The IP address(es) of the remote systems that are attached to the + specified TE link"; + } + + leaf metric { + when "../type = 'TE_LINK_METRIC'" { + description + "Include the traffic engineering metric only when the sub-TLV type + is a TE metric"; + } + + type uint32; + description + "The metric of the link that should be used for traffic engineering + purposes. This link may be different than the standard OSPF link + metric."; + } + + leaf maximum-bandwidth { + when "../type = 'TE_LINK_MAXIMUM_BANDWIDTH'" { + description + "Include the traffic engineering metric only when the sub-TLV type + is the maximum bandwidth"; + } + + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The maximum bandwidth of the link. This value reflects the actual + bandwidth of the link expressed asn IEEE 32-bit floating point + number"; + } + + leaf maximum-reservable-bandwidth { + when "../type = 'TE_LINK_MAXIUMUM_RESERVABLE_BANDWIDTH'" { + description + "Include the maximum reservable bandwidth field only when the + sub-TLV type is the maximum reservable bandwidth"; + } + + type oc-types:ieeefloat32; + units "bytes per second"; + description + "The maximum reservable bandwidth for the link. This value represents + the total bandwidth which may be used for traffic engineering + purposes. The value may exceed the maximum-bandwidth value + in cases where the link is oversubscribed. The value is reflected as + a 32-bit IEEE floating-point number"; + } + } + + grouping ospfv2-lsdb-opaque-te-link-unreserved-bw-state { + description + "The per-priority unreserved bandwidth described within the unreserved + bandwidth sub-TLV of the Link TLV of the Traffic Engineering LSA"; + + leaf priority { + type uint8 { + range "0..7"; + } + description + "The priority level being described"; + } + + leaf unreserved-bandwidth { + type oc-types:ieeefloat32; + description + "The unreserved bandwidth for at priority level P, where P is + equal to the priority of the current list entry. The reservable + bandwidth at priority P is equal to the sum of the reservable + bandwidth at all levels 0..P."; + } + } + + grouping ospfv2-lsdb-opaque-te-link-admin-group-state { + description + "Per bit administrative group status"; + + leaf bit-index { + type uint8 { + range "0..31"; + } + description + "The index of the bit within the 32-bit administrative group field + of the Administrative Group sub-TLV of the Traffic Engineering LSA"; + } + + leaf set { + type boolean; + default false; + description + "Whether the bit is set within the administrative group field"; + } + } + + grouping ospfv2-lsdb-opaque-te-node-attribute-state { + description + "State parameters relating to the Traffic Engineering Node Attribute + TLV of the Traffic Engineering LSA"; + + leaf type { + type union { + type identityref { + base "oc-ospf-types:TE_NODE_ATTRIBUTE_TLV_TYPE"; + } + type enumeration { + enum UNKNOWN { + description + "The sub-TLV type received within the TE LSA Node Attribute TLV + was unknown the the local system"; + } + } + } + description + "The type of the sub-TLV of the Node Attribute TLV contained within + the TE LSA. If the local system can interpret the value received the + canonical name of the type is utilised, otherwise the special UNKNOWN + value is used"; + } + + leaf-list local-ipv4-addresses { + when "../type = 'NODE_IPV4_LOCAL_ADDRESS'" { + description + "Include the local IPv4 addresses when the type of the sub-TLV + indicates that this is the contained data"; + } + + type inet:ipv4-prefix; + description + "The local IPv4 addresses of the node expressed in CIDR notation"; + } + + leaf-list local-ipv6-addresses { + when "../type = 'NODE_LOCAL_IPV6_ADDRESS'" { + description + "Include the local IPv6 addresses when the type of the sub-TLV + indicfates that this is the contained data"; + } + + type inet:ipv6-prefix; + description + "The local IPv6 addreses of the node"; + } + } + + grouping ospfv2-lsdb-opaque-te-router-address-state { + description + "The contents of the value field of the Router Address TLV of the + Traffic Engineering LSA."; + + leaf address { + type inet:ipv4-address-no-zone; + description + "A stable IP address of the advertising router, that is always + reachable when the router is connected to the network. Typically this + is a loopback address."; + } + } + + grouping ospfv2-lsdb-opaque-grace-state { + description + "State parameters on a per-TLV basis of the Grace LSA"; + + leaf type { + type identityref { + base "oc-ospf-types:GRACE_LSA_TLV_TYPES"; + } + description + "The type of the sub-TLV received within the Grace LSA"; + } + + leaf period { + when "../type = 'GRACE_PERIOD'" { + description + "Include the period specification when the sub-TLV type is indicated + to be of this type"; + } + + type uint32; + units seconds; + description + "The number of seconds that the router's neighbors should advertise + the local system as fully adjacent regardless of database + synchronization state"; + reference "RFC3623"; + } + + leaf reason { + when "../type = 'GRACE_RESTART_REASON'" { + description + "Include the restart reason when the sub-TLV type specifies this + is included"; + } + + type enumeration { + enum UNKNOWN { + value 0; + description + "The reason for the graceful restart is unknown"; + } + enum SOFTWARE_RESTART { + value 1; + description + "The local system is restarting due to a software component + restart"; + } + enum SOFTWARE_RELOAD_UPGRADE { + value 2; + description + "The local system is restarting due to a software reload or + upgrade"; + } + enum CONTROL_PROCESSOR_SWITCH { + value 3; + description + "The local system is restarting due to a switch to a redundant + control plane element"; + } + } + description + "The reason for the graceful restart event occurring, as advertised + by the restarting system"; + reference "RFC3623"; + } + + leaf ip-interface-address { + when "../type = 'GRACE_IP_INTERFACE_ADDRESS'" { + description + "Include the interface address when the sub-TLV type specifies that + it is included"; + } + + type inet:ipv4-address-no-zone; + description + "The restarting system's IP address on the interface via which the + Grace LSA is being advertised."; + } + } + + grouping ospfv2-lsdb-opaque-ri-state { + description + "State parameters of the Router Information Opaque LSA"; + + leaf type { + type union { + type identityref { + base "oc-ospf-types:RI_LSA_TLV_TYPES"; + } + type enumeration { + enum UNKNOWN { + description + "The TLV received within the RI LSA is unknown"; + } + } + } + description + "The type of sub-TLV of the Router Information opaque LSA"; + } + } + + grouping ospfv2-lsdb-opaque-ri-informational-state { + description + "State parmaeters of the Router Information Informational Capabilities + sub-TLV"; + + leaf graceful-restart-capable { + type boolean; + default false; + description + "When this leaf is set to true, the advertising system is capable of + OSPF graceful restart."; + } + + leaf graceful-restart-helper { + type boolean; + default false; + description + "When this leaf is set to true, the advertising system is capable of + being a helper for OSPF graceful restart"; + } + + leaf stub-router { + type boolean; + default false; + description + "When this leaf is set to true, the advertising system is able to + advertise its status as a stub router"; + reference "RFC6987"; + } + + leaf traffic-engineering { + type boolean; + default false; + description + "When this leaf is set to true, the advertising system supports OSPFv2 + traffic engineering capabilities"; + } + + leaf point-to-point-over-lan { + type boolean; + default false; + description + "When this leaf is set to true, the advertising system supports treating + LAN adjacencies as though they were point to point"; + reference "RFC5309"; + } + + leaf experimental-te { + type boolean; + default false; + description + "When this leaf is set to ture, the advertising system supports the + experimental extensions to OSPF for TE described in RFC4973"; + reference "RFC4973"; + } + } + + grouping ospfv2-lsdb-opaque-ri-admintag-state { + description + "State parameters relating to the administrative tags specified for + a node within the RI LSA"; + + leaf-list administrative-tags { + type uint32; + description + "The set of administrative tags assigned to the local system by + the network operator. The meaning of these tags is opaque to OSPF + - and their interpretation is per-domain specific"; + reference "RFC7777"; + } + } + + grouping ospfv2-lsdb-opaque-ri-unknown-state { + description + "State parameters relating to an unknown TLV within the RI LSA"; + uses ospfv2-lsdb-common-unknown-tlv; + } + + grouping ospfv2-lsdb-opaque-ri-sralgo-state { + description + "State parameters relating to the SR Algorithms TLV of the RI LSA"; + + leaf-list supported-algorithms { + type identityref { + base "oc-ospf-types:SR_ALGORITHM"; + } + description + "A list of the algorithms that are supported for segment routing + by the advertising system"; + } + } + + grouping ospfv2-lsdb-opaque-ri-srrange-tlv-state { + description + "State parameters relating to the SR SID/Label range TLV of the + RI LSA"; + + leaf type { + type union { + type identityref { + base "oc-ospf-types:OSPF_RI_SR_SID_LABEL_TLV_TYPES"; + } + type enumeration { + enum UNKNOWN { + description + "The type of the sub-TLV advertised with the SID/Label range + TLV of the RI LSA is unknown to the receiving system"; + } + } + } + description + "The type of the sub-TLV received by the local system within the + SR SID/Label Range TLV of the RI LSA"; + } + + leaf range-size { + type uint32 { + range "0..16777216"; + } + description + "The number of entries within the range being described within the + SID/Label range TLV"; + } + } + + grouping ospfv2-lsdb-opaque-ri-srrange-sid-label-tlv-state { + description + "State parameters relating to the SR SID/Label sub-TLV of the SR SID/Label + range TLV of the RI LSA"; + + leaf entry-type { + type oc-ospf-types:sr-sid-type; + description + "The type of entry that is contained within the sub-TLV. The range may + be represented as either a range of MPLS labels, or numeric segment + identifiers"; + } + + leaf first-value { + type uint32; + description + "The first value within the SRGB range being specified. The type of the + entry is determined based on the value of the entry type as this value + may represent either a segment identifier or an MPLS label."; + } + } + + grouping ospfv2-lsdb-extended-prefix-state { + description + "State parameters relating to an Extended Prefix LSA"; + + leaf route-type { + type enumeration { + enum UNSPECIFIED { + value 0; + description + "The prefix described in the extended prefix LSA is of an + unspecified type"; + } + enum INTRA_AREA { + value 1; + description + "The prefix described in the extended prefix LSA is an intra-area + prefix for the advertising system"; + } + enum INTER_AREA { + value 3; + description + "The prefix described in the extended prefix LSA is an inter-area + prefix for the advertising system"; + } + enum AS_EXTERNAL { + value 5; + description + "The prefix described in the extended prefix LSA is external to the + autonomous system of the advertising system"; + } + enum NSSA_EXTERNAL { + value 7; + description + "The prefix described in the extended prefix LSA externally + advertised from an NSSA area visibile to the advertising system"; + } + } + description + "The type of prefix that is contained within the Extended Prefix LSA. + The information contained in sub-TLVs of the attribute is applicable + regardless of this value."; + } + + uses ospfv2-lsdb-common-prefix-properties; + + leaf attached { + type boolean; + default false; + description + "If this value is set to true, the prefix being advertised was + generated by an ABR for an inter-area prefix. The value corresponds + to the A-flag of the flags field of the Extended Prefix LSA"; + } + + leaf node { + type boolean; + default false; + description + "If this value is set to true, the prefix being advertised represents + the advertising router. Typically, the prefix within the LSA is + expected to be globally-reachable prefix associated with a loopback + interface"; + } + + leaf prefix { + type inet:ipv4-address-no-zone; + description + "The IPv4 prefix contained within the extended prefix LSA"; + } + } + + grouping ospfv2-lsdb-extended-link-state { + description + "State parameters related to an extended link LSA"; + + leaf link-type { + type identityref { + base "oc-ospf-types:OSPFV2_ROUTER_LINK_TYPE"; + } + description + "The type of link with which extended attributes are associated"; + } + + uses ospfv2-lsdb-common-link-specification; + + } + + grouping ospfv2-lsdb-extended-link-tlv-state { + description + "State parameters relating to a sub-TLV of the extended link LSA"; + + leaf type { + type identityref { + base "oc-ospf-types:OSPFV2_EXTENDED_LINK_SUBTLV_TYPE"; + } + description + "The type of the sub-TLV contained within the extended link TLV"; + } + } + + grouping ospfv2-lsdb-extended-prefix-tlv-state { + description + "State parameters related to a sub-TLV of an Extended Prefix LSA"; + + leaf type { + type identityref { + base "oc-ospf-types:OSPFV2_EXTENDED_PREFIX_SUBTLV_TYPE"; + } + description + "The type of sub-TLV as indicated by the Extended Prefix LSA"; + } + } + + grouping ospfv2-lsdb-extended-prefix-range-state { + description + "Parameters of the Extended Prefix Range SubTLV"; + + uses ospfv2-lsdb-common-prefix-properties; + + leaf range-size { + type uint16; + description + "The number of prefixes that are covered by the advertisement."; + } + + leaf inter-area { + type boolean; + default false; + description + "When this leaf is set to true, then the prefix range is inter-area - + the flag is set by the ABR that advertises the Extended Prefix Range + TLV"; + } + + leaf prefix { + type inet:ipv4-prefix; + description + "The first prefix in the range of prefixes being described by the + extended prefix range sub-TLV"; + } + } + + grouping ospfv2-lsdb-extended-prefix-prefix-sid-state { + description + "Parameters of the Prefix-SID sub-TLV"; + + leaf no-php { + type boolean; + default false; + description + "If this leaf is set the advertising system has indicated that the + prefix SID must not be popped before delivering packets to it"; + } + + leaf mapping-server { + type boolean; + default false; + description + "If this leaf is set the SID was advertised by a Segment Routing + mapping server"; + } + + leaf explicit-null { + type boolean; + default false; + description + "If this leaf is set, the advertising system has requested that the + prefix SID value should be replaced with the explicit null label + value"; + } + + leaf sid-value-type { + type enumeration { + enum ABSOLUTE { + description + "The SID contained in the Prefix-SID sub-TLV is an absolute + value"; + } + enum INDEX { + description + "The SID contained in the Prefix-SID sub-TLV is an index to the + SRGB"; + } + } + description + "Specifies the type of the value specified within the Prefix SID + sub-TLV - in particular, whether the value is an index or an + absolute value. This value corresponds with the V-flag of the Prefix + SID sub-TLV"; + } + + leaf sid-scope { + type enumeration { + enum LOCAL { + description + "The value of the SID is + significant only to the advertising system"; + } + enum GLOBAL { + description + "The value of the SID is globally significant"; + } + } + description + "Specifies the scope of the SID advertisement within the Prefix SID + sub-TLV. The scope of the SID is independent of whether the SID + contained is an index, or an absolute value"; + } + + leaf multi-topology-identifier { + type uint8; + description + "The identifier for the topology to which the Prefix SID relates. The + value of this leaf is a MT-ID as defined in RFC4915"; + } + + leaf algorithm { + type uint8; + description + "The algorithm that computes the path associated with the Prefix SID"; + } + + leaf sid-value { + type uint32; + description + "The value of the Prefix SID. The meaning of this value is dependent + upon the type of SID, and its scope. The value contained is either a + 32-bit value indicating the index of the SID, or a 24-bit label where + the 20 right-most bits are used for encoding the label value"; + } + } + + grouping ospfv2-lsdb-extended-prefix-sid-label-binding-state { + description + "State parameters relating to the extended prefix SID SID/Label binding + sub-TLV"; + + leaf mirroring { + type boolean; + default false; + description + "When set to true, this indicates that the SID/Label Binding sub-TLV + entries contained within this TLV are indicative of a mirroring + context"; + } + + leaf multi-topology-identifier { + type uint8; + description + "The identifier for the topology to which the SID/Label Binding + sub-TLV is associated. The value of this leaf is a MT-ID as defined + in RFC4915"; + } + + leaf weight { + type uint8; + description + "The weight of the advertised binding when used for load-balancing + purposes"; + } + } + + grouping ospfv2-lsdb-extended-prefix-sid-label-binding-tlv-state { + description + "State parameters directly relating to the SID/Label Binding TLV"; + + leaf type { + type identityref { + base + "oc-ospf-types:OSPFV2_EXTENDED_PREFIX_SID_LABEL_BINDING_SUBTLV_TYPE"; + } + description + "The type of sub-TLV that is being contained within the SID/Label + sub-TLV"; + } + } + + grouping ospfv2-lsdb-extprefix-sid-label-binding-state { + description + "State parameters relating to the SID/Label binding sub-TLV of the + SID/Label/Binding TLV"; + + uses ospfv2-lsdb-common-sr-sid-spec; + } + + grouping ospfv2-lsdb-extprefix-sid-label-ero-metric-state { + description + "State parameters relating to the ERO Metric Sub-TLV of the SID/Label + Binding TLV"; + + leaf metric { + type uint32; + description + "The metric representing the aggregate IGP or TE path cost for the + binding included within the SID/Label Binding TLV"; + } + } + + grouping ospfv2-lsdb-extprefix-sid-lbl-ero-path-seg-state { + description + "State parameters relating to the a segment included within the + ERO Path Sub-TLV of the SID/Label Binding TLV"; + + leaf type { + type identityref { + base "oc-ospf-types:OSPFV2_EXTPREFIX_BINDING_ERO_PATH_SEGMENT_TYPE"; + } + description + "The type of the segment being specified as part of the ERO"; + } + + leaf loose { + type boolean; + default false; + description + "If this leaf is set the segment is identifier as a loose path + segment, otherwise the path strictly follows the path specified"; + } + } + + grouping ospfv2-lsdb-extprefix-sid-lbl-ero-ipv4-state { + description + "State parameters relating to an IPv4 address segment included within + the ERO path"; + + leaf address { + type inet:ipv4-address-no-zone; + description + "The IPv4 address of the hop within the ERO"; + } + } + + grouping ospfv2-lsdb-extprefix-sid-lbl-ero-unnum-state { + description + "State parameters relating to an unnumbered hop within the ERO path"; + + leaf router-id { + type inet:ipv4-address-no-zone; + description + "The IPv4 router identtifier of the remote system"; + } + + leaf interface-id { + type uint32; + description + "The identifier assigned to the link by the remote system"; + } + } + + grouping ospfv2-lsdb-extended-link-adj-sid-state { + description + "State parameters relating to the Adjacency SID sub-TLV of the + Extended Link LSA"; + + leaf backup { + type boolean; + default false; + description + "When this flag is set, it indicates that the adjacency SID refers to + an adjacency which is eligible for protection"; + } + + leaf group { + type boolean; + default false; + description + "When this flag is set it indicates that the adjacency SID refers to + a group of adjacencies that have a common value"; + } + + uses ospfv2-lsdb-common-sr-sid-spec; + + leaf weight { + type uint8; + description + "The weight of the Adjacency SID when used for load-balancing"; + } + + leaf multi-topology-identifier { + type uint8; + description + "The multi-topology identifier with which the adjacency SID is + associated"; + } + } + + grouping ospfv2-lsdb-structure { + description + "Structural grouping for per-area LSDB contents"; + + container lsdb { + // Top-level RO, if this were ever to become writeable then + // the state containers lower down need config false added + config false; + description + "The link-state database for the OSPFv2 area"; + + container state { + description + "Operational state parameters relating to the OSPFv2 + area"; + + uses ospfv2-lsdb-area-state; + } + + container lsa-types { + description + "Enclosing container for a list of LSA types that are + in the LSDB for the specified area"; + + list lsa-type { + key "type"; + + description + "List of LSA types in the LSDB for the specified + area"; + + leaf type { + type leafref { + path "../state/type"; + } + description + "A reference for the LSA type being described within + the LSDB"; + } + + container state { + description + "Top-level operational state parameters relating to + an LSA within the area"; + uses ospfv2-lsdb-area-lsa-type-state; + } + + container lsas { + description + "Enclosing container for a list of the LSAs of + the specified type received by the system"; + + list lsa { + key "link-state-id"; + + description + "List of the LSAs of a specified type in the + LSDB for the specified area"; + + leaf link-state-id { + type leafref { + path "../state/link-state-id"; + } + description + "Reference to the Link State ID of the LSA"; + } + + container state { + description + "Operational state parameters relating to all + LSA types"; + uses ospfv2-lsdb-area-lsa-state; + } + + uses ospfv2-lsdb-router-lsa-structure { + when "../../state/type = 'ROUTER_LSA'" { + description + "Include the router LSA hierarchy solely when + that LSA type is being described"; + } + } + + uses ospfv2-lsdb-network-lsa-structure { + when "../../state/type = 'NETWORK_LSA'" { + description + "Include the network LSA hierarchy solely when + that LSA type is being described"; + } + } + + uses ospfv2-lsdb-summary-lsa-structure { + // rjs TODO: check this syntax + when "../../state/type = " + + "'SUMMARY_IP_NETWORK_LSA' or " + + "../../state/type = 'SUMMARY_ASBR_LSA'" { + description + "Include the summary LSA hierarchy solely when + that LSA type is being described"; + } + } + + uses ospfv2-lsdb-asexternal-lsa-structure { + when "../../state/type = 'AS_EXTERNAL_LSA'" { + description + "Include the AS external LSA hierarchy solely when + that LSA type is being described"; + } + } + + uses ospfv2-lsdb-nssa-external-lsa-structure { + when "../../state/type = 'NSSA_AS_EXTERNAL_LSA'" { + description + "Include the NSSA External LSA hierarchy solely + when that LSA type is being described"; + } + } + + uses ospfv2-lsdb-opaque-lsa-structure { + when "../../state/type = 'OSPFV2_LINK_SCOPE_OPAQUE_LSA' + or ../../state/type = 'OSPFV2_AREA_SCOPE_OPAQUE_LSA' + or ../../state/type = 'OSPFV2_AS_SCOPE_OPAQUE_LSA'" { + description + "Include the Opaque LSA structure when type of entry + being described in an opaque LSA"; + } + } + } + } + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-ospfv2.yang b/src/plugins/yang/openconfig/openconfig-ospfv2.yang new file mode 100644 index 0000000..6ff43c4 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-ospfv2.yang @@ -0,0 +1,98 @@ +module openconfig-ospfv2 { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/ospfv2"; + + prefix "oc-ospfv2"; + + // import some basic types + //import ietf-inet-types { prefix inet; } + import openconfig-extensions { prefix "oc-ext"; } + + // Include submodules + // Global: All global context groupings; + include openconfig-ospfv2-global; + // Area: Config/opstate for an area + include openconfig-ospfv2-area; + // Area Interface: Config/opstate for an Interface + include openconfig-ospfv2-area-interface; + // LSDB: Operational state model covering the LSDB + include openconfig-ospfv2-lsdb; + // Common: Content included in >1 context + include openconfig-ospfv2-common; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "An OpenConfig model for Open Shortest Path First (OSPF) + version 2"; + + oc-ext:openconfig-version "0.1.2"; + + revision "2018-06-05" { + description + "Bug fixes in when statements in lsdb"; + reference "0.1.2"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes."; + reference "0.1.1"; + } + + revision "2017-02-28"{ + description + "Initial public release of OSPFv2"; + reference "0.1.0"; + } + + revision "2016-06-24" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping ospfv2-top { + description + "Top-level OSPF configuration and operational state"; + + container ospfv2 { + description + "Top-level configuration and operational state for + Open Shortest Path First (OSPF) v2"; + + uses ospfv2-global-structural; + + container areas { + description + "Configuration and operational state relating to an + OSPFv2 area."; + + list area { + key "identifier"; + + description + "The OSPFv2 areas within which the local system exists"; + + leaf identifier { + type leafref { + path "../config/identifier"; + } + description + "A reference to the identifier for the area."; + } + + uses ospfv2-area-structure; + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-packet-match-types.yang b/src/plugins/yang/openconfig/openconfig-packet-match-types.yang new file mode 100644 index 0000000..d23cc61 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-packet-match-types.yang @@ -0,0 +1,297 @@ +module openconfig-packet-match-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/packet-match-types"; + + prefix "oc-pkt-match-types"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines common types for use in models requiring + data definitions related to packet matches."; + + oc-ext:openconfig-version "1.0.1"; + + revision "2018-04-15" { + description + "Corrected description and range for ethertype typedef"; + reference "1.0.1"; + } + + revision "2017-05-26" { + description + "Separated IP matches into AFs"; + reference "1.0.0"; + } + + revision "2016-08-08" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + revision "2016-04-27" { + description + "Initial revision"; + reference "TBD"; + } + + // extension statements + + // feature statements + + // identity statements + + + //TODO: should replace this with an official IEEE module + // when available. Only a select number of types are + // defined in this identity. + identity ETHERTYPE { + description + "Base identity for commonly used Ethertype values used + in packet header matches on Ethernet frames. The Ethertype + indicates which protocol is encapsulated in the Ethernet + payload."; + reference + "IEEE 802.3"; + } + + identity ETHERTYPE_IPV4 { + base ETHERTYPE; + description + "IPv4 protocol (0x0800)"; + } + + identity ETHERTYPE_ARP { + base ETHERTYPE; + description + "Address resolution protocol (0x0806)"; + } + + identity ETHERTYPE_VLAN { + base ETHERTYPE; + description + "VLAN-tagged frame (as defined by IEEE 802.1q) (0x8100). Note + that this value is also used to represent Shortest Path + Bridging (IEEE 801.1aq) frames."; + } + + identity ETHERTYPE_IPV6 { + base ETHERTYPE; + description + "IPv6 protocol (0x86DD)"; + } + + identity ETHERTYPE_MPLS { + base ETHERTYPE; + description + "MPLS unicast (0x8847)"; + } + + identity ETHERTYPE_LLDP { + base ETHERTYPE; + description + "Link Layer Discovery Protocol (0x88CC)"; + } + + identity ETHERTYPE_ROCE { + base ETHERTYPE; + description + "RDMA over Converged Ethernet (0x8915)"; + } + + + //TODO: should replace this with an official IANA module when + //available. Only a select set of protocols are defined with + //this identity. + identity IP_PROTOCOL { + description + "Base identity for commonly used IP protocols used in + packet header matches"; + reference + "IANA Assigned Internet Protocol Numbers"; + } + + identity IP_TCP { + base IP_PROTOCOL; + description + "Transmission Control Protocol (6)"; + } + + identity IP_UDP { + base IP_PROTOCOL; + description + "User Datagram Protocol (17)"; + } + + identity IP_ICMP { + base IP_PROTOCOL; + description + "Internet Control Message Protocol (1)"; + } + + identity IP_IGMP { + base IP_PROTOCOL; + description + "Internet Group Membership Protocol (2)"; + } + + identity IP_PIM { + base IP_PROTOCOL; + description + "Protocol Independent Multicast (103)"; + } + + identity IP_RSVP { + base IP_PROTOCOL; + description + "Resource Reservation Protocol (46)"; + } + + identity IP_GRE { + base IP_PROTOCOL; + description + "Generic Routing Encapsulation (47)"; + } + + identity IP_AUTH { + base IP_PROTOCOL; + description + "Authentication header, e.g., for IPSEC (51)"; + } + + identity IP_L2TP { + base IP_PROTOCOL; + description + "Layer Two Tunneling Protocol v.3 (115)"; + } + + + + identity TCP_FLAGS { + description + "Common TCP flags used in packet header matches"; + reference + "IETF RFC 793 - Transmission Control Protocol + IETF RFC 3168 - The Addition of Explicit Congestion + Notification (ECN) to IP"; + } + + identity TCP_SYN { + base TCP_FLAGS; + description + "TCP SYN flag"; + } + + identity TCP_FIN { + base TCP_FLAGS; + description + "TCP FIN flag"; + } + + identity TCP_RST { + base TCP_FLAGS; + description + "TCP RST flag"; + } + + identity TCP_PSH { + base TCP_FLAGS; + description + "TCP push flag"; + } + + identity TCP_ACK { + base TCP_FLAGS; + description + "TCP ACK flag"; + } + + identity TCP_URG { + base TCP_FLAGS; + description + "TCP urgent flag"; + } + + identity TCP_ECE { + base TCP_FLAGS; + description + "TCP ECN-Echo flag. If the SYN flag is set, indicates that + the TCP peer is ECN-capable, otherwise indicates that a + packet with Congestion Experienced flag in the IP header + is set"; + } + + identity TCP_CWR { + base TCP_FLAGS; + description + "TCP Congestion Window Reduced flag"; + } + + // typedef statements + + typedef port-num-range { + type union { + type string { + pattern '^(6[0-5][0-5][0-3][0-5]|[0-5]?[0-9]?[0-9]?[0-9]?' + + '[0-9]?)\.\.(6[0-5][0-5][0-3][0-5]|[0-5]?[0-9]?[0-9]?' + + '[0-9]?[0-9]?)$'; + } + type oc-inet:port-number; + type enumeration { + enum ANY { + description + "Indicates any valid port number (e.g., wildcard)"; + } + } + } + description + "Port numbers may be represented as a single value, + an inclusive range as .., or as ANY to + indicate a wildcard."; + } + + typedef ip-protocol-type { + type union { + type uint8 { + range 0..254; + } + type identityref { + base IP_PROTOCOL; + } + } + description + "The IP protocol number may be expressed as a valid protocol + number (integer) or using a protocol type defined by the + IP_PROTOCOL identity"; + } + + typedef ethertype-type { + type union { + type uint16 { + range 1536..65535; + } + type identityref { + base ETHERTYPE; + } + } + description + "The Ethertype value may be expressed as a 16-bit number in + decimal notation, or using a type defined by the + ETHERTYPE identity"; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-packet-match.yang b/src/plugins/yang/openconfig/openconfig-packet-match.yang new file mode 100644 index 0000000..7dcf037 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-packet-match.yang @@ -0,0 +1,360 @@ +module openconfig-packet-match { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/header-fields"; + + prefix "oc-pkt-match"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-packet-match-types { prefix oc-pkt-match-types; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines data related to packet header fields + used in matching operations, for example in ACLs. When a + field is omitted from a match expression, the effect is a + wildcard ('any') for that field."; + + oc-ext:openconfig-version "1.1.0"; + + revision "2017-12-15" { + description + "Add MPLS packet field matches"; + reference "1.1.0"; + } + + revision "2017-05-26" { + description + "Separated IP matches into AFs"; + reference "1.0.0"; + } + + revision "2016-08-08" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + revision "2016-04-27" { + description + "Initial revision"; + reference "TBD"; + } + + + // Physical Layer fields + // ethernet-header + grouping ethernet-header-config { + description + "Configuration data of fields in Ethernet header."; + + leaf source-mac { + type oc-yang:mac-address; + description + "Source IEEE 802 MAC address."; + } + + leaf source-mac-mask { + type oc-yang:mac-address; + description + "Source IEEE 802 MAC address mask."; + } + + leaf destination-mac { + type oc-yang:mac-address; + description + "Destination IEEE 802 MAC address."; + } + + leaf destination-mac-mask { + type oc-yang:mac-address; + description + "Destination IEEE 802 MAC address mask."; + } + + leaf ethertype { + type oc-pkt-match-types:ethertype-type; + description + "Ethertype field to match in Ethernet packets"; + } + } + + grouping ethernet-header-state { + description + "State information of fields in Ethernet header."; + } + + grouping ethernet-header-top { + description + "Top level container for fields in Ethernet header."; + + container l2 { + description + "Ethernet header fields"; + + container config { + description + "Configuration data"; + uses ethernet-header-config; + } + + container state { + config false; + description + "State Information."; + uses ethernet-header-config; + uses ethernet-header-state; + } + } + } + + grouping mpls-header-top { + description + "Top-level container for fields in an MPLS header."; + + container mpls { + description + "MPLS header fields"; + + container config { + description + "Configuration parameters relating to fields within + the MPLS header."; + uses mpls-header-config; + } + + container state { + config false; + description + "Operational state parameters relating to fields + within the MPLS header"; + uses mpls-header-config; + } + } + } + + grouping mpls-header-config { + description + "Configuration parameters relating to matches within + MPLS header fields."; + + leaf traffic-class { + type uint8 { + range "0..7"; + } + description + "The value of the MPLS traffic class (TC) bits, + formerly known as the EXP bits."; + } + } + + grouping ip-protocol-fields-common-config { + description + "IP protocol fields common to IPv4 and IPv6"; + + leaf dscp { + type oc-inet:dscp; + description + "Value of diffserv codepoint."; + } + + leaf protocol { + type oc-pkt-match-types:ip-protocol-type; + description + "The protocol carried in the IP packet, expressed either + as its IP protocol number, or by a defined identity."; + } + + leaf hop-limit { + type uint8 { + range 0..255; + } + description + "The IP packet's hop limit -- known as TTL (in hops) in + IPv4 packets, and hop limit in IPv6"; + } + } + + // IP Layer + // ip-protocol-fields + grouping ipv4-protocol-fields-config { + description + "Configuration data of IP protocol fields + for IPv4"; + + leaf source-address { + type oc-inet:ipv4-prefix; + description + "Source IPv4 address prefix."; + } + + leaf destination-address { + type oc-inet:ipv4-prefix; + description + "Destination IPv4 address prefix."; + } + + uses ip-protocol-fields-common-config; + + } + + grouping ipv4-protocol-fields-state { + description + "State information of IP header fields for IPv4"; + } + + grouping ipv4-protocol-fields-top { + description + "IP header fields for IPv4"; + + container ipv4 { + description + "Top level container for IPv4 match field data"; + + container config { + description + "Configuration data for IPv4 match fields"; + uses ipv4-protocol-fields-config; + } + + container state { + config false; + description + "State information for IPv4 match fields"; + uses ipv4-protocol-fields-config; + uses ipv4-protocol-fields-state; + } + } + } + + grouping ipv6-protocol-fields-config { + description + "Configuration data for IPv6 match fields"; + + leaf source-address { + type oc-inet:ipv6-prefix; + description + "Source IPv6 address prefix."; + } + + leaf source-flow-label { + type oc-inet:ipv6-flow-label; + description + "Source IPv6 Flow label."; + } + + leaf destination-address { + type oc-inet:ipv6-prefix; + description + "Destination IPv6 address prefix."; + } + + leaf destination-flow-label { + type oc-inet:ipv6-flow-label; + description + "Destination IPv6 Flow label."; + } + + uses ip-protocol-fields-common-config; + } + + grouping ipv6-protocol-fields-state { + description + "Operational state data for IPv6 match fields"; + } + + grouping ipv6-protocol-fields-top { + description + "Top-level grouping for IPv6 match fields"; + + container ipv6 { + description + "Top-level container for IPv6 match field data"; + + container config { + description + "Configuration data for IPv6 match fields"; + + uses ipv6-protocol-fields-config; + } + + container state { + + config false; + + description + "Operational state data for IPv6 match fields"; + + uses ipv6-protocol-fields-config; + uses ipv6-protocol-fields-state; + } + } + } + + // Transport fields + grouping transport-fields-config { + description + "Configuration data of transport-layer packet fields"; + + leaf source-port { + type oc-pkt-match-types:port-num-range; + description + "Source port or range"; + } + + leaf destination-port { + type oc-pkt-match-types:port-num-range; + description + "Destination port or range"; + } + + leaf-list tcp-flags { + type identityref { + base oc-pkt-match-types:TCP_FLAGS; + } + description + "List of TCP flags to match"; + } + } + + grouping transport-fields-state { + description + "State data of transport-fields"; + } + + grouping transport-fields-top { + description + "Destination transport-fields top level grouping"; + + container transport { + description + "Transport fields container"; + + container config { + description + "Configuration data"; + uses transport-fields-config; + } + + container state { + config false; + description + "State data"; + uses transport-fields-config; + uses transport-fields-state; + } + } + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-pf-forwarding-policies.yang b/src/plugins/yang/openconfig/openconfig-pf-forwarding-policies.yang new file mode 100644 index 0000000..6b08c87 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-pf-forwarding-policies.yang @@ -0,0 +1,385 @@ +submodule openconfig-pf-forwarding-policies { + belongs-to openconfig-policy-forwarding { + prefix "oc-pf"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-packet-match { prefix "oc-pmatch"; } + import openconfig-yang-types { prefix "oc-yang"; } + import openconfig-inet-types { prefix "oc-inet"; } + + include openconfig-pf-path-groups; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains configuration and operational state + relating to the definition of policy-forwarding policies."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2017-06-21" { + description + "Amend policy forwarding model based on ACL changes."; + reference "0.2.0"; + } + + revision "2017-02-28" { + description + "Initial public release of policy forwarding."; + reference "0.1.0"; + } + + revision "2016-11-08" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping pf-forwarding-policy-structural { + description + "Structural grouping defining forwarding policies under the + policy- forwarding module."; + + container policies { + description + "Forwarding policies defined to enact policy-based forwarding + on the local system."; + + list policy { + key "policy-id"; + + description + "A forwarding policy is defined to have a set of match + criteria, allowing particular fields of a packet's header to + be matched, and a set of forwarding actions which determines + how the local system should forward the packet."; + + leaf policy-id { + type leafref { + path "../config/policy-id"; + } + description + "Reference to the identifier for the forwarding-policy."; + } + + container config { + description + "Configuration options relating to the forwarding + policy."; + uses pf-forwarding-policy-config; + } + + container state { + config false; + description + "Operational state parameters relating to the forwarding + policy."; + uses pf-forwarding-policy-config; + } + + container rules { + description + "The criteria that should be matched for a packet to be + forwarded according to the policy action."; + + list rule { + key "sequence-id"; + + description + "A match rule for the policy. In the case that multiple + criteria are specified within a single rule, all criteria + must be met for the rule to be applied to a packet."; + + leaf sequence-id { + type leafref { + path "../config/sequence-id"; + } + description + "A unique sequence identifier for the match rule."; + } + + container config { + description + "Configuration parameters relating to the match + rule."; + uses pf-forwarding-policy-rule-config; + } + + container state { + config false; + description + "Operational state parameters relating to the match + rule."; + uses pf-forwarding-policy-rule-config; + uses pf-forwarding-policy-rule-state; + } + + uses oc-pmatch:ethernet-header-top; + uses oc-pmatch:ipv4-protocol-fields-top; + uses oc-pmatch:ipv6-protocol-fields-top; + uses oc-pmatch:transport-fields-top; + + container action { + description + "The forwarding policy action to be applied for + packets matching the rule."; + + container config { + description + "Configuration parameters relating to the forwarding + rule's action."; + uses pf-forwarding-policy-action-config; + } + + container state { + config false; + description + "Operational state parameters relating to the + forwarding rule's action."; + uses pf-forwarding-policy-action-config; + } + + uses pf-forwarding-policy-action-encapsulate-gre; + } + } + } + } + } + } + + grouping pf-forwarding-policy-config { + description + "Configuration parameters relating to the forwarding policy."; + + leaf policy-id { + type string; + description + "A unique name identifying the forwarding policy. This name is + used when applying the policy to a particular interface."; + } + } + + grouping pf-forwarding-policy-rule-config { + description + "Configuration parameters relating to a policy rule."; + + leaf sequence-id { + type uint32; + description + "Unique sequence number for the policy rule."; + } + } + + grouping pf-forwarding-policy-rule-state { + description + "Operational state parameters relating to a policy rule."; + + leaf matched-pkts { + type oc-yang:counter64; + description + "Number of packets matched by the rule."; + } + + leaf matched-octets { + type oc-yang:counter64; + description + "Bytes matched by the rule."; + } + } + + grouping pf-forwarding-policy-action-config { + description + "Forwarding policy action configuration parameters."; + + leaf discard { + type boolean; + default false; + description + "When this leaf is set to true, the local system should drop + packets that match the rule."; + } + + leaf decapsulate-gre { + type boolean; + default false; + description + "When this leaf is set to true, the local system should remove + the GRE header from the packet matching the rule. Following + the decapsulation it should subsequently forward the + encapsulated packet according to the relevant lookup (e.g., if + the encapsulated packet is IP, the packet should be routed + according to the IP destination)."; + } + + leaf network-instance { + type leafref { + + // We are at: + // $NIROOT/policy-forwarding/policies/ + // policy/rules/rule/action/config/ + // network-instance + path "../../../../../../../../config/name"; + } + description + "When this leaf is set, packets matching the match criteria + for the forwarding rule should be looked up in the + network-instance that is referenced rather than the + network-instance with which the interface is associated. + Such configuration allows policy-routing into multiple + sub-topologies from a single ingress access interface, or + different send and receive contexts for a particular + interface (sometimes referred to as half-duplex VRF)."; + } + + leaf path-selection-group { + type leafref { + // We are at: + // $NIROOT/policy-forwarding/policies/ + // policy/rules/rule/action/config/to-path-group + path "../../../../../../../path-selection-groups/" + + "path-selection-group/config/group-id"; + } + description + "When path-selection-group is set, packets matching the + match criteria for the forwarding rule should be forwarded + only via one of the paths that is specified within the + referenced path-selection-group. The next-hop of the packet + within the routing context should be used to determine between + multiple paths that are specified within the group."; + } + + leaf next-hop { + type oc-inet:ip-address; + description + "When an IP next-hop is specified in the next-hop field, + packets matching the match criteria for the forwarding rule + should be forwarded to the next-hop IP address, bypassing any + lookup on the local system."; + } + } + + grouping pf-forwarding-policy-action-encapsulate-gre { + description + "Structural grouping covering the encapsulate-gre action of the + policy forwarding rule."; + + container encapsulate-gre { + description + "Packets matching the policy rule should be GRE encapsulated + towards the set of targets defined within the target list. Where + more than one target is specified, or the target subnet expands + to more than one endpoint, packets should be load-balanced across + the destination addresses within the subnets."; + + container config { + description + "Configuration parameters for the GRE encapsulation rules action."; + uses pf-forwarding-policy-action-gre-config; + } + + container state { + description + "Operational state parameters for the GRE encapsulation rule + action."; + config false; + uses pf-forwarding-policy-action-gre-config; + } + + container targets { + description + "Surrounding container for the list of GRE tunnel targets that + should be encapsulated towards."; + + list target { + key "id"; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to the unique identifier for the target."; + } + + description + "Each target specified within this list should be treated as a + endpoint to which packets should be GRE encapsulated. Where the + set of destinations described within a single entry expands to + more than one destination IP address, packets should be load + shared across the destination using the local system's ECMP hashing + mechanisms."; + + container config { + description + "Configuration parameters for the GRE target."; + uses pf-forwarding-policy-action-gre-target-config; + } + + container state { + description + "Operational state parameters for the GRE target."; + config false; + uses pf-forwarding-policy-action-gre-target-config; + } + } + } + } + } + + grouping pf-forwarding-policy-action-gre-config { + description + "Configuration parameters for the encapsulate-gre forwarding + policy action."; + + leaf identifying-prefix { + type oc-inet:ip-prefix; + description + "An IP prefix that can be used to identify the group of + GRE endpoints that are being encapsulated towards. Systems + that require an IP identifier for the tunnel set + should use this prefix as the next-hop identifier."; + } + } + + grouping pf-forwarding-policy-action-gre-target-config { + description + "Configuration parameters for each target of a GRE Encapsulation + rule"; + + leaf id { + type string; + description + "A unique identifier for the target."; + } + + leaf source { + type oc-inet:ip-address; + description + "The source IP address that should be used when encapsulating + packets from the local system."; + } + + leaf destination { + type oc-inet:ip-prefix; + description + "The set of destination addresses that should be encapsulated towards. + Where a subnet is specified, each address within the subnet should be + treated as an independent destination for encapsulated traffic. Packets + should be distributed with ECMP across the set of tunnel destination + addresses."; + } + + leaf ip-ttl { + type uint8; + description + "The TTL that should be specified in the IP header of the GRE packet + encapsulating the packet matching the rule."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-pf-interfaces.yang b/src/plugins/yang/openconfig/openconfig-pf-interfaces.yang new file mode 100644 index 0000000..41ba545 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-pf-interfaces.yang @@ -0,0 +1,121 @@ +submodule openconfig-pf-interfaces { + belongs-to openconfig-policy-forwarding { + prefix "oc-pf"; + } + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-interfaces { prefix "oc-if"; } + + include openconfig-pf-forwarding-policies; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains groupings related to the association + between interfaces and policy forwarding rules."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2017-06-21" { + description + "Amend policy forwarding model based on ACL changes."; + reference "0.2.0"; + } + + revision "2017-02-28" { + description + "Initial public release of policy forwarding."; + reference "0.1.0"; + } + + revision "2016-11-08" { + description + "Initial revision"; + reference "0.0.1"; + } + + + grouping pf-interfaces-structural { + description + "Structural grouping for interface to forwarding policy bindings + within the policy-forwarding model."; + + container interfaces { + description + "Configuration and operational state relating policy + forwarding on interfaces."; + + list interface { + key "interface-id"; + + description + "Configuration and operationals state relating to the + relationship between interfaces and policy-based forwarding + rules."; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "A reference to the unique identifier for the interface + being referenced by the policy."; + } + + container config { + description + "Configuration parameters relating to an interface to + policy forwarding rule binding."; + + uses pf-interface-config; + } + + container state { + config false; + description + "Operational state parameters relating to an interface to + policy forwarding rule binding."; + + uses pf-interface-config; + } + + uses oc-if:interface-ref; + } + } + } + + grouping pf-interface-config { + description + "Configuration parameters relating to an interface to policy + forwarding rule binding."; + + leaf interface-id { + type oc-if:interface-id; + description + "A unique identifier for the interface."; + } + + leaf apply-forwarding-policy { + type leafref { + // We are at /network-instances/network-instance/ + // policy-forwarding/interfaces/interface/config/ + // apply-forwarding-policy + path "../../../../policies/policy/" + + "config/policy-id"; + } + description + "The policy to be applied on the interface. Packets ingress on + the referenced interface should be compared to the match + criteria within the specified policy, and in the case that + these criteria are met, the forwarding actions specified + applied. These policies should be applied following quality of + service classification, and ACL actions if such entities are + referenced by the corresponding interface."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-pf-path-groups.yang b/src/plugins/yang/openconfig/openconfig-pf-path-groups.yang new file mode 100644 index 0000000..aa96595 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-pf-path-groups.yang @@ -0,0 +1,125 @@ +submodule openconfig-pf-path-groups { + belongs-to openconfig-policy-forwarding { + prefix "oc-pf"; + } + + import openconfig-extensions { prefix "oc-ext"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains configuration and operational state + relating to path-selection-groups which are used to group + forwarding entities together to be used as policy forwarding + targets."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2017-06-21" { + description + "Amend policy forwarding model based on ACL changes."; + reference "0.2.0"; + } + + revision "2017-02-28" { + description + "Initial public release of policy forwarding."; + reference "0.1.0"; + } + + revision "2016-11-08" { + description + "Initial revision"; + reference "0.0.1"; + } + + grouping pf-path-groups-structural { + description + "Structural grouping containing the definition of path groups + within the context of policy-based forwarding."; + + container path-selection-groups { + description + "Surrounding container for the path selection groups defined + within the policy forwarding model."; + + list path-selection-group { + key "group-id"; + + leaf group-id { + type leafref { + path "../config/group-id"; + } + description + "Reference to a unique identifier for the path selection + group"; + + } + + description + "A path selection group is a set of forwarding resources, + which are grouped as eligible paths for a particular + policy-based forwarding rule. A policy rule may select a + path-selection-group as the egress for a particular type of + traffic (e.g., DSCP value). The system then utilises its + standard forwarding lookup mechanism to select from the + paths that are specified within the group - for IP packets, + the destination IP address is used such that the packet is + routed to the entity within the path-selection-group that + corresponds to the next-hop for the destination IP address + of the packet; for L2 packets, the selection is based on the + destination MAC address. If multiple paths within the + selection group are eligible to be used for forwarding, + the packets are load-balanced between them according to + the system's usual load balancing logic."; + + container config { + description + "Configuration parameters relating to the path selection + group."; + uses pf-path-selection-group-config; + } + + container state { + config false; + description + "Operational state parameters relating to the path + selection group."; + uses pf-path-selection-group-config; + } + } + } + } + + grouping pf-path-selection-group-config { + description + "Configuration parameters relating to a path selection group."; + + leaf group-id { + type string; + description + "A unique name for the path-selection-group"; + } + + leaf-list mpls-lsp { + type leafref { + // We are at /network-instances/network-instance/ + // policy-forwarding/path-selection-groups/ + // path-selection-group/config/mpls-lsp + path "../../../../../mpls/lsps/constrained-path/tunnels/" + + "tunnel/config/name"; + } + description + "A set of MPLS constrained-path LSPs which should be + considered for the policy forwarding next-hop. In order to + select between the LSPs within the path-selection-group, the + system should determine which LSP provides the best path to + the next-hop for the routed packet."; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-pf-srte.yang b/src/plugins/yang/openconfig/openconfig-pf-srte.yang new file mode 100644 index 0000000..07e6cc5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-pf-srte.yang @@ -0,0 +1,280 @@ +module openconfig-pf-srte { + yang-version "1"; + namespace "http://openconfig.net/yang/policy-forwarding/sr-te"; + prefix "oc-pf-srte"; + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-network-instance { prefix "oc-ni"; } + import openconfig-mpls-types { prefix "oc-mplst"; } + import openconfig-inet-types { prefix "oc-inet"; } + import openconfig-segment-routing { prefix "oc-sr"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig Working group + www.openconfig.net"; + + description + "This module defines extensions to the OpenConfig policy forwarding + module to support static segment routing traffic engineering policy + definitions. Extensions are provided to match: + + - Ingress binding SIDs, such that traffic can be mapped based on + an ingress label. + - A colour community and endpoint combination, such that the + routes can be resolved according to the policy forwarding + entries that are to be installed. + + In addition, policy forwarding actions associated with next-hops are + added to the model. The next-hop set to be forwarded to is augmented + to cover a set of lists of segments. The most common application of + such segment lists is to express stacks of MPLS labels which are used + as SR segments. In addition, they may be used to expressed segments + in the form of IPv6 addresses."; + + oc-ext:openconfig-version "0.1.0"; + + revision 2017-10-01 { + description + "Initial revision of the SR-TE policy SAFI model."; + reference "0.1.0"; + } + + grouping oc-pf-srte-match-top { + description + "Top-level grouping used for SR-TE policy match criteria within + a policy forwarding rule."; + + container srte { + description + "Match criteria associated with Segment Routing Traffic Engineering + policies."; + + container config { + description + "Configuration parameters associated with SR-TE policies."; + uses oc-pf-srte-match-config; + } + + container state { + config false; + description + "Operational state parameters associated with SR-TE policies."; + uses oc-pf-srte-match-config; + } + } + } + + grouping oc-pf-srte-match-config { + description + "Configuration parameters specific to Segment Routing traffic + Engineering."; + + leaf mpls-bsid { + type oc-mplst:mpls-label; + description + "The Binding SID (BSID) to be matched expressed as an MPLS label. Packets + that are ingress to the system with the top-most label matching + the SID value specified in this leaf should be forwarded according + to the policy. The top-most label (the specified Binding SID) + must be popped from the label stack by the system."; + } + + leaf srte-endpoint { + type oc-inet:ip-address; + description + "When the policy forwarding rule is used for RIB resolution + to a Segment Routing Traffic Engineering path, the policy is used + when the required endpoint (which may be the protocol next-hop) + matches the endpoint address specified in this + leaf. When the leaf is set to all zeros (0.0.0.0 or ::), the endpoint + acts as a wildcard in the policy resolution."; + } + + leaf srte-color { + type uint32; + description + "When the policy forwarding rule is used for RIB resolution to a + specific Segment Routing Traffic Engineering path, the policy is + used when the colour required in the policy (which may be specified + based on the value of a BGP extended colour community) matches the + value of this leaf. The colour being set to 0 indicates that the + colour is a wildcard in the policy resolution."; + } + + leaf srte-preference { + type uint32; + description + "When there are multiple policy forwarding rules specified for + a particular SR-TE endpoint. The preference is used to resolve + between them. These rules may be learnt from a dynamic routing + protocol, or interface to the device, or from other static + entries configured on the system."; + } + } + + grouping oc-pf-srte-segment-list-top { + description + "Top-level grouping for specifying segment lists under a policy + forwarding action."; + + container segment-lists { + description + "A list of SR-TE segment lists that should be applied as an + action within this policy. Where a system selects the SR-TE + policy to be used, the list of segment lists that is specified + should be used as forwarding next-hops."; + + list segment-list { + key "index"; + description + "An individual segment list within the list of segment + lists used for SR-TE policies."; + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the index leaf which act as a key to the + segment-list list."; + } + + container config { + description + "Configuration parameters for the SR-TE segment list."; + uses oc-pf-srte-segment-list-config; + } + + container state { + config false; + description + "Operational state parameters relating to the SR-TE + segment list."; + uses oc-pf-srte-segment-list-config; + } + + container sids { + description + "Surrounding container for the list of SIDs that makes up the + segment list."; + + list sid { + key "index"; + + description + "List of SIDs that make up the segment list. The segment list + is formed by ordering the set of SIDs that are specified by + their index in ascending numerical order."; + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the SID's index within the segment list which + acts as the key of the list."; + } + + container config { + description + "Configuration parameters relating to the SID within the + segment list."; + uses oc-pf-srte-segment-list-sid-config; + } + + container state { + config false; + description + "Operational state parameters relating to the SID within + the segment list."; + uses oc-pf-srte-segment-list-sid-config; + } + } + } + } + } + } + + grouping oc-pf-srte-segment-list-config { + description + "Configuration parameters relating to a segment list."; + + leaf index { + type uint64; + description + "Unique integer identifying the segment list within the set + of segment lists used for the SR-TE policy action."; + } + + leaf weight { + type uint32; + description + "The weight of the segment list within the set of segment lists + specified for the policy. The traffic that is forwarded according + to the policy is distributed across the set of paths such that + each list receives weight/(sum of all weights) traffic."; + } + } + + grouping oc-pf-srte-segment-list-sid-config { + description + "Configuration parameters relating to a SID within an SR-TE segment + list"; + + leaf index { + type uint64; + description + "The index of the SID within the segment list. The segment list is + applied by ordering the SID entries in ascending numerical order + beginning at 0."; + } + + leaf value { + type oc-sr:sr-sid-type; + description + "The value of the SID that is to be used. Specified as an MPLS + label or IPv6 address."; + } + + leaf mpls-ttl { + type uint8; + default 0; + description + "The TTL to be set if the type of the SID is an MPLS label. If the + value of the TTL is set to be 0, the value is picked by the local + implementation."; + } + + leaf mpls-tc { + type uint8 { + range "0..7"; + } + default 0; + description + "The value of the MPLS Traffic Class (TC) bits to be used if the + value of the SID is an MPLS label. In the case that the value is + set to 0, then the local implementation should choose the value."; + } + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/oc-ni:policy-forwarding/" + + "oc-ni:policies/oc-ni:policy/oc-ni:rules/oc-ni:rule" { + description + "Add the SR-TE specific policy forwarding match criteria to the + policy forwarding model."; + + uses oc-pf-srte-match-top; + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/oc-ni:policy-forwarding/" + + "oc-ni:policies/oc-ni:policy/oc-ni:rules/oc-ni:rule/oc-ni:action" { + description + "Add the SR-TE specific policy forwarding actions to the + policy forwarding model."; + + uses oc-pf-srte-segment-list-top; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-pim-types.yang b/src/plugins/yang/openconfig/openconfig-pim-types.yang new file mode 100644 index 0000000..86cf78c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-pim-types.yang @@ -0,0 +1,74 @@ +module openconfig-pim-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/pim/types"; + + prefix "oc-pim-types"; + + // import some basic types + import openconfig-extensions { prefix "oc-ext"; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types related to the PIM protocol model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-02-19" { + description + "Initial revision."; + reference "0.1.0"; + } + + // identity statements + + identity PIM_MODE { + description + "Base identity for the operating modes of Protocol-Independent + Multicast."; + } + + identity PIM_MODE_SPARSE { + base PIM_MODE; + description + "PIM sparse mode (PIM-SM)."; + reference "RFC7761"; + } + + identity PIM_MODE_DENSE { + base PIM_MODE; + description + "PIM dense mode (PIM-DM)."; + reference "RFC3973"; + } + + // typedef statements + + typedef dr-priority-type { + type uint32; + description + "The port's designated router priority. Larger always preferred. + DR Priority is a 32-bit unsigned number, ranges 0-4294967295."; + reference "RFC7761 4.3.1 page 33"; + } + + typedef pim-interval-type { + type uint8 { + range 1..255; + } + units "seconds"; + description + "Interval at which the router sends the PIM message toward the + upstream RPF neighbor."; + reference "RFC7761 4.5 page 44, 4.3.1 page 29"; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-pim.yang b/src/plugins/yang/openconfig/openconfig-pim.yang new file mode 100644 index 0000000..7389f9c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-pim.yang @@ -0,0 +1,464 @@ +module openconfig-pim { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/pim"; + + prefix "oc-pim"; + + // import some basic types/interfaces + import openconfig-pim-types { prefix oc-pim-types; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-acl { prefix oc-acl; } + import openconfig-types { prefix "oc-types"; } + import openconfig-extensions { prefix "oc-ext"; } + import ietf-inet-types { prefix "inet"; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "An OpenConfig model for Protocol Independent Multicast (PIM)."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-02-09" { + description + "Initial revision."; + reference "0.1.0"; + } + + grouping admin-config { + description + "Re-usable grouping to enable or disable a particular feature."; + + leaf enabled { + type boolean; + default false; + description + "When set to true, the functionality within which this + leaf is defined is enabled, when set to false it is + explicitly disabled."; + } + } + + grouping pim-counters-state { + description + "Counters related to PIM messages."; + + leaf hello-messages { + type uint32; + description + "Number of hello messages received."; + reference "RFC7761 4.9.2 page 108"; + } + + leaf join-prune-messages { + type uint32; + description + "Number of join/prune messages received."; + reference "RFC7761 4.5 page 44"; + } + + leaf bootstrap-messages { + type uint32; + description + "Number of bootstrap router messages received."; + reference "RFC7761 3.7 page 12"; + } + } + + grouping pim-interface-config { + description + "Configuration data for PIM on each interface."; + + uses admin-config; + + leaf interface-id { + type oc-if:interface-id; + description + "Reference to an interface on which PIM is enabled."; + } + + leaf mode { + type identityref { + base oc-pim-types:PIM_MODE; + } + description + "PIM mode to use when delivering multicast traffic via this + interface."; + } + + leaf bsr-border { + type boolean; + default false; + description + "When set to true the device will not send bootstrap router + messages over this interface. By default these are transmitted + over all PIM sparse mode (PIM-SM) enabled interfaces."; + } + + leaf border-router { + type boolean; + default false; + description + "When set to true the interface is set as MBR (multicast border + router) and allows multicast traffic from sources that are + outside of the PIM domain."; + } + + + leaf dr-priority { + type oc-pim-types:dr-priority-type; + description + "The designated router priority of this interface. Larger always + preferred."; + } + + leaf join-prune-interval { + type oc-pim-types:pim-interval-type; + description + "Interval at which the router sends the PIM join/prune messages + toward the upstream RPF neighbor."; + } + + leaf hello-interval { + type oc-pim-types:pim-interval-type; + description + "Interval at which the router sends the PIM hello messages."; + } + + leaf dead-timer { + type uint16 { + range 1..65535; + } + description + "Number of missed hello messages after which a neighbor is + expired."; + } + } + + grouping pim-neighbor-state { + description + "PIM neighbor state."; + + leaf neighbor-address { + type inet:ipv4-address; + description + "IPv4 address of neighbor router."; + } + + leaf dr-address { + type inet:ipv4-address; + description + "IPv4 address of designated router."; + } + + leaf neighbor-established { + type oc-types:timeticks64; + description + "This timestamp indicates the time that the + PIM neighbor adjacency established. The value is the + timestamp in seconds relative to the Unix Epoch + (Jan 1, 1970 00:00:00 UTC). + + The PIM session uptime can be computed by clients + as the difference between this value and the + current time in UTC."; + } + + leaf neighbor-expires { + type oc-types:timeticks64; + description + "This timestamp indicates the time that the + PIM neighbor adjacency will expire should hello + messages fail to arrive from the neighbor. + The value is the timestamp in seconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf mode { + type identityref { + base oc-pim-types:PIM_MODE; + } + description + "PIM mode in use when delivering multicast traffic + via this neighbor."; + } + } + + grouping pim-neighbors-top { + description + "Details about PIM neighbors."; + + container neighbors { + config false; + description + "Details about PIM neighbors."; + + list neighbor { + key "neighbor-address"; + description + "Details about a specific PIM neighbor."; + + leaf neighbor-address { + type leafref { + path "../state/neighbor-address"; + } + description + "IPv4 address of neighbor router."; + } + + container state { + config false; + description + "Details about a specific PIM neighbor."; + + uses pim-neighbor-state; + } + } + } + } + + grouping pim-interfaces-top { + description + "Configuration and state data for PIM on each interface."; + + container interfaces { + description + "Configuration and state data for PIM on each interface."; + + list interface { + key "interface-id"; + description + "This container defines interface PIM configuration and + state information."; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "Reference to an interface on which PIM is enabled."; + } + + container config { + description + "PIM interface configuration."; + + uses pim-interface-config; + } + + container state { + config false; + description + "State information for PIM interfaces."; + + uses pim-interface-config; + container counters { + description + "PIM counters for each interface."; + + uses pim-counters-state; + } + } + + uses pim-neighbors-top; + uses oc-if:interface-ref; + } + } + } + + grouping pim-global-state { + description + "State and session data for PIM on each interface."; + + leaf neighbor-count { + type uint8; + description + "Number of adjacent PIM neighbors."; + } + + container counters { + description + "Global PIM counters."; + + uses pim-counters-state; + } + } + + grouping pim-sources-joined-top { + description + "List of multicast sources joined."; + + container sources-joined { + config false; + description + "List of multicast sources joined."; + + list source { + key "address"; + description + "A multicast source that has been joined."; + + leaf address { + type leafref { + path "../state/address"; + } + description + "Source address of multicast."; + } + + container state { + config false; + description + "State for a multicast source that has been joined."; + + leaf address { + type inet:ipv4-address; + description + "Source address of multicast."; + } + + leaf group { + type inet:ipv4-address; + description + "Multicast address."; + } + + leaf upstream-interface-id { + type oc-if:interface-id; + description + "The upstream interface for this multicast source."; + } + } + } + } + } + + grouping pim-global-ssm-config { + description + "Source specific multicast (SSM) configuration."; + + leaf ssm-ranges { + type leafref { + path "/oc-acl:acl/oc-acl:acl-sets/oc-acl:acl-set/" + + "oc-acl:config/oc-acl:name"; + } + description + "List of accepted source specific multicast (SSM) address + ranges."; + } + } + + grouping pim-global-rp-addresses-config { + description + "Defines rendezvous points for sparse mode multicast."; + + leaf address { + type inet:ipv4-address; + description + "IPv4 address of rendezvous point."; + } + + leaf multicast-groups { + type string; + // TODO should this be an ACL or prefix-list reference or prefix list? + // Cisco it's an ACL, Juniper it's an inline prefix list + description + "List of multicast groups (multicast IP address ranges) for which + this entry will be used as a rendezvous point. When not + present the default is equivalent to all valid IP multicast + addresses."; + } + } + + grouping pim-global-top { + description + "Top level grouping for global PIM configuration."; + + container ssm { + description + "Source specific multicast (SSM)."; + + container config { + description + "Configuration for source specific multicast (SSM)."; + uses pim-global-ssm-config; + } + container state { + config false; + description + "State for source specific multicast (SSM)."; + uses pim-global-ssm-config; + } + } + + container rendezvous-points { + description + "Defines rendezvous points for sparse mode multicast."; + + list rendezvous-point { + key "address"; + description + "Defines a rendezvous point (RP) for sparse mode multicast."; + + leaf address { + type leafref { + path "../config/address"; + } + description + "IPv4 address of rendezvous point."; + } + + container config { + description + "Rendezvous point configuration."; + uses pim-global-rp-addresses-config; + } + container state { + config false; + description + "Rendezvous point state."; + uses pim-global-rp-addresses-config; + } + } + } + + container state { + config false; + description + "Global PIM state."; + uses pim-global-state; + } + + uses pim-sources-joined-top; + } + + grouping pim-top { + description + "Top-level grouping for PIM."; + + container pim { + description + "Top-level PIM configuration and operational state."; + + container global { + description + "This container defines global PIM configuration and state + information."; + uses pim-global-top; + } + + uses pim-interfaces-top; + } + } + + // data definition statements +} diff --git a/src/plugins/yang/openconfig/openconfig-platform-cpu.yang b/src/plugins/yang/openconfig/openconfig-platform-cpu.yang new file mode 100644 index 0000000..5ea25f1 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-cpu.yang @@ -0,0 +1,61 @@ +module openconfig-platform-cpu { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/cpu"; + + prefix "oc-cpu"; + + import openconfig-platform { prefix oc-platform; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines data related to FAN components in the + OpenConfig platform model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-01-30" { + description + "Initial revision"; + reference "0.1.0"; + } + + grouping component-cpu-utilization { + description + "Per-component CPU statistics"; + + container utilization { + description + "Statistics representing CPU utilization of the + component."; + + container state { + config false; + description + "Operational state variables relating to the utilization + of the CPU."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + } + } + + augment "/oc-platform:components/oc-platform:component/" + + "oc-platform:cpu" { + description + "Adding CPU utilization data to component model"; + + uses component-cpu-utilization; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-platform-ext.yang b/src/plugins/yang/openconfig/openconfig-platform-ext.yang new file mode 100644 index 0000000..f47293e --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-ext.yang @@ -0,0 +1,72 @@ +module openconfig-platform-ext { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/extension"; + + prefix "oc-platform-ext"; + + import openconfig-platform { prefix oc-platform; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines optional extensions to the OpenConfig + platform model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-01-18" { + description + "Initial revision"; + reference "0.1.0"; + } + + + // identity statements + + // typedef statements + + // grouping statements + + + grouping platform-component-ext-state { + description + "Operational state data for platform components"; + + leaf entity-id { + type uint32; + description + "A unique numeric identifier assigned by the system to the + component. This identifier may be used to represent the + corresponding SNMP Entity MIB identifier."; + } + } + + + // data definition statements + + // augment statements + + augment "/oc-platform:components/oc-platform:component/" + + "oc-platform:state" { + description + "Adding extension state data to components"; + + uses platform-component-ext-state; + } + + // rpc statements + + // notification statements + +} + diff --git a/src/plugins/yang/openconfig/openconfig-platform-fan.yang b/src/plugins/yang/openconfig/openconfig-platform-fan.yang new file mode 100644 index 0000000..92b5dbe --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-fan.yang @@ -0,0 +1,65 @@ +module openconfig-platform-fan { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/fan"; + + prefix "oc-fan"; + + import openconfig-platform { prefix oc-platform; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines data related to FAN components in the + OpenConfig platform model."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2018-01-18" { + description + "Initial revision"; + reference "0.1.0"; + } + + // identity statements + + // typedef statements + + // grouping statements + + grouping fan-state { + description + "Operational state data for fan components"; + + leaf speed { + type uint32; + units rpm; + description + "Current (instantaneous) fan speed"; + } + } + + + // data definition statements + + // augment statements + + augment "/oc-platform:components/oc-platform:component/" + + "oc-platform:fan/oc-platform:state" { + description + "Adding fan data to component model"; + + uses fan-state; + } + +} + diff --git a/src/plugins/yang/openconfig/openconfig-platform-linecard.yang b/src/plugins/yang/openconfig/openconfig-platform-linecard.yang new file mode 100644 index 0000000..46d9c7f --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-linecard.yang @@ -0,0 +1,118 @@ +module openconfig-platform-linecard { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/linecard"; + + prefix "oc-linecard"; + + import openconfig-platform { prefix oc-platform; } + import openconfig-platform-types { prefix oc-platform-types; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines data related to LINECARD components in + the openconfig-platform model"; + + oc-ext:openconfig-version "0.1.0"; + + revision "2017-08-03" { + description + "Initial revision"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + // grouping statements + + grouping linecard-config { + description + "Configuration data for linecard components"; + + leaf power-admin-state { + type oc-platform-types:component-power-type; + default POWER_ENABLED; + description + "Enable or disable power to the linecard"; + } + } + + grouping linecard-state { + description + "Operational state data for linecard components"; + + leaf slot-id { + type string; + description + "Identifier for the slot or chassis position in which the + linecard is installed"; + } + } + + grouping linecard-top { + description + "Top-level grouping for linecard data"; + + container linecard { + description + "Top-level container for linecard data"; + + container config { + description + "Configuration data for linecards"; + + uses linecard-config; + } + + container state { + + config false; + + description + "Operational state data for linecards"; + + uses linecard-config; + uses linecard-state; + } + } + } + + // data definition statements + + // augment statements + + augment "/oc-platform:components/oc-platform:component" { + description + "Adding linecard data to physical inventory"; + + uses linecard-top { + when "current()/oc-platform:state/" + + "oc-platform:type = 'LINECARD'" { + description + "Augment is active when component is of type LINECARD"; + } + } + } + + // rpc statements + + // notification statements + +} + diff --git a/src/plugins/yang/openconfig/openconfig-platform-port.yang b/src/plugins/yang/openconfig/openconfig-platform-port.yang new file mode 100644 index 0000000..2039a8e --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-port.yang @@ -0,0 +1,149 @@ +module openconfig-platform-port { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/port"; + + prefix "oc-port"; + + // import some basic types + import openconfig-platform { prefix oc-platform; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-if-ethernet { prefix oc-eth; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines data related to PORT components in the openconfig-platform model"; + + oc-ext:openconfig-version "0.3.0"; + + revision "2018-01-20" { + description + "Added augmentation for interface-to-port reference"; + reference "0.3.0"; + } + + revision "2017-11-17" { + description + "Corrected augmentation path for port data"; + reference "0.2.0"; + } + + revision "2016-10-24" { + description + "Initial revision"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + // typedef statements + + // grouping statements + + grouping port-breakout-config { + description + "Configuration data for the port breakout mode"; + + leaf num-channels { + type uint8; + description + "Sets the number of channels to 'breakout' on a port + capable of channelization"; + } + + leaf channel-speed { + type identityref { + base oc-eth:ETHERNET_SPEED; + } + description + "Sets the channel speed on each channel -- the + supported values are defined by the + ETHERNET_SPEED identity"; + } + } + + grouping port-breakout-state { + description + "Operational state data for the port breakout mode "; + } + + grouping port-breakout-top { + description + "Top-level grouping for port breakout data"; + + container breakout-mode { + description + "Top-level container for port breakout data"; + + container config { + description + "Configuration data for port breakout"; + + uses port-breakout-config; + } + + container state { + + config false; + + description + "Operational state data for port breakout"; + + uses port-breakout-config; + uses port-breakout-state; + } + } + } + + // data definition statements + + // augment statements + + augment "/oc-platform:components/oc-platform:component/" + + "oc-platform:port" { + description + "Adding port breakout data to physical platform data"; + + uses port-breakout-top { + when "./state/type = 'PORT'" { + description + "This data is valid only for PORT components"; + } + } + } + + augment "/oc-if:interfaces/oc-if:interface/oc-if:state" { + description + "Adds a reference from the base interface to the corresponding + port component in the device inventory."; + + leaf hardware-port { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "For non-channelized interfaces, references the hardware port + corresponding to the base interface."; + } + } + + // rpc statements + + // notification statements + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-platform-psu.yang b/src/plugins/yang/openconfig/openconfig-platform-psu.yang new file mode 100644 index 0000000..eec4caa --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-psu.yang @@ -0,0 +1,135 @@ +module openconfig-platform-psu { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/psu"; + + prefix "oc-platform-psu"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + import openconfig-platform { prefix oc-platform; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines a schema for power supply components in + the OpenConfig platform model."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2018-01-16" { + description + "Changed admin state leaf name"; + reference "0.2.0"; + } + + revision "2017-12-21" { + description + "Initial revision"; + reference "0.1.0"; + } + + // identity statements + + // typedef statements + + // grouping statements + + grouping psu-config { + description + "Configuration data for power supply components"; + + leaf enabled { + type boolean; + default true; + description + "Adminsitrative control on the on/off state of the power + supply unit."; + } + } + + grouping psu-state { + description + "Operational state data for power supply components"; + + + // TODO(aashaikh): May need to convert some of these to + // interval statistics once decided on which leaves to include. + leaf capacity { + type oc-types:ieeefloat32; + units watts; + description + "Maximum power capacity of the power supply."; + } + + leaf input-current { + type oc-types:ieeefloat32; + units amps; + description + "The input current draw of the power supply."; + } + + leaf input-voltage { + type oc-types:ieeefloat32; + units volts; + description + "Input voltage to the power supply."; + } + + leaf output-current { + type oc-types:ieeefloat32; + units amps; + description + "The output current supplied by the power supply."; + } + + leaf output-voltage { + type oc-types:ieeefloat32; + units volts; + description + "Output voltage supplied by the power supply."; + } + + leaf output-power { + type oc-types:ieeefloat32; + units watts; + description + "Output power supplied by the power supply."; + } + } + + // data definition statements + + // augment statements + + augment "/oc-platform:components/oc-platform:component/" + + "oc-platform:power-supply/oc-platform:config" { + description + "Adds power supply data to component operational state."; + + uses psu-config; + } + + augment "/oc-platform:components/oc-platform:component/" + + "oc-platform:power-supply/oc-platform:state" { + description + "Adds power supply data to component operational state."; + + uses psu-config; + uses psu-state; + } + + + // rpc statements + + // notification statements +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-platform-transceiver.yang b/src/plugins/yang/openconfig/openconfig-platform-transceiver.yang new file mode 100644 index 0000000..66b9071 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-transceiver.yang @@ -0,0 +1,492 @@ +module openconfig-platform-transceiver { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform/transceiver"; + + prefix "oc-transceiver"; + + // import some basic types + import openconfig-platform { prefix oc-platform; } + import openconfig-platform-port { prefix oc-port; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-transport-types { prefix oc-opt-types; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-yang-types { prefix oc-yang; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + for transceivers (i.e., pluggable optics). The module should be + used in conjunction with the platform model where other + physical entity data are represented. + + In the platform model, a component of type=TRANSCEIVER is + expected to be a subcomponent of a PORT component. This + module defines a concrete schema for the associated data for + components with type=TRANSCEIVER."; + + oc-ext:openconfig-version "0.5.0"; + + revision "2018-05-15" { + description + "Remove internal-temp state leaf, since we prefer + the generic /components/component/state/temperature + container for temperature information."; + reference "0.5.0"; + } + + revision "2018-01-22" { + description + "Fixed physical-channel path reference"; + reference "0.4.1"; + } + + revision "2017-09-18" { + description + "Use openconfig-yang-types module"; + reference "0.4.0"; + } + + revision "2017-07-08" { + description + "Adds clarification on aggregate power measurement data"; + reference "0.3.0"; + } + + revision "2016-12-22" { + description + "Adds preconfiguration data and clarified units"; + reference "0.2.0"; + } + + // identity statements + + // typedef statements + + // grouping statements + + grouping optical-power-state { + description + "Reusable leaves related to optical power state -- these + are read-only state values. If avg/min/max statistics are + not supported, the target is expected to just supply the + instant value"; + + container output-power { + description + "The output optical power of a physical channel in units + of 0.01dBm, which may be associated with individual + physical channels, or an aggregate of multiple physical + channels (i.e., for the overall transceiver). For an + aggregate, this may be a measurement from a photodetector + or a a calculation performed on the device by summing up + all of the related individual physical channels. + Values include the instantaneous, average, minimum, and + maximum statistics. If avg/min/max statistics are not + supported, the target is expected to just supply the + instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container input-power { + description + "The input optical power of a physical channel in units + of 0.01dBm, which may be associated with individual + physical channels, or an aggregate of multiple physical + channels (i.e., for the overall transceiver). For an + aggregate, this may be a measurement from a photodetector + or a a calculation performed on the device by summing up + all of the related individual physical channels. + Values include the instantaneous, average, minimum, and + maximum statistics. If avg/min/max statistics are not + supported, the target is expected to just supply the + instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container laser-bias-current { + description + "The current applied by the system to the transmit laser to + achieve the output power. The current is expressed in mA + with up to two decimal precision. Values include the + instantaneous, average, minimum, and maximum statistics. + If avg/min/max statistics are not supported, the target is + expected to just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-mA; + } + } + + grouping output-optical-frequency { + description + "Reusable leaves related to optical output power -- this is + typically configurable on line side and read-only on the + client-side"; + + leaf output-frequency { + type oc-opt-types:frequency-type; + description + "The frequency in MHz of the individual physical channel + (e.g. ITU C50 - 195.0THz and would be reported as + 195,000,000 MHz in this model). This attribute is not + configurable on most client ports."; + } + } + + + grouping physical-channel-config { + description + "Configuration data for physical client channels"; + + leaf index { + type uint16 { + range 0..max; + } + description + "Index of the physical channnel or lane within a physical + client port"; + } + + leaf description { + type string; + description + "Text description for the client physical channel"; + } + + leaf tx-laser { + type boolean; + description + "Enable (true) or disable (false) the transmit label for the + channel"; + } + + leaf target-output-power { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "Target output optical power level of the optical channel, + expressed in increments of 0.01 dBm (decibel-milliwats)"; + } + } + + grouping physical-channel-state { + description + "Operational state data for client channels."; + + uses output-optical-frequency; + uses optical-power-state; + } + + grouping physical-channel-top { + description + "Top-level grouping for physical client channels"; + + container physical-channels { + description + "Enclosing container for client channels"; + + list channel { + key "index"; + description + "List of client channels, keyed by index within a physical + client port. A physical port with a single channel would + have a single zero-indexed element"; + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the index number of the channel"; + } + + container config { + description + "Configuration data for physical channels"; + + uses physical-channel-config; + } + + container state { + + config false; + + description + "Operational state data for channels"; + + uses physical-channel-config; + uses physical-channel-state; + } + } + } + } + + + grouping port-transceiver-config { + description + "Configuration data for client port transceivers"; + + leaf enabled { + type boolean; + description + "Turns power on / off to the transceiver -- provides a means + to power on/off the transceiver (in the case of SFP, SFP+, + QSFP,...) or enable high-power mode (in the case of CFP, + CFP2, CFP4) and is optionally supported (device can choose to + always enable). True = power on / high power, False = + powered off"; + } + + leaf form-factor-preconf { + type identityref { + base oc-opt-types:TRANSCEIVER_FORM_FACTOR_TYPE; + } + description + "Indicates the type of optical transceiver used on this + port. If the client port is built into the device and not + pluggable, then non-pluggable is the corresponding state. If + a device port supports multiple form factors (e.g. QSFP28 + and QSFP+, then the value of the transceiver installed shall + be reported. If no transceiver is present, then the value of + the highest rate form factor shall be reported + (QSFP28, for example). + + The form factor is included in configuration data to allow + pre-configuring a device with the expected type of + transceiver ahead of deployment. The corresponding state + leaf should reflect the actual transceiver type plugged into + the system."; + } + + leaf ethernet-pmd-preconf { + type identityref { + base oc-opt-types:ETHERNET_PMD_TYPE; + } + description + "The Ethernet PMD is a property of the optical transceiver + used on the port, indicating the type of physical connection. + It is included in configuration data to allow pre-configuring + a port/transceiver with the expected PMD. The actual PMD is + indicated by the ethernet-pmd state leaf."; + } + } + + grouping port-transceiver-state { + description + "Operational state data for client port transceivers"; + + leaf present { + type enumeration { + enum PRESENT { + description + "Transceiver is present on the port"; + } + enum NOT_PRESENT { + description + "Transceiver is not present on the port"; + } + } + description + "Indicates whether a transceiver is present in + the specified client port."; + } + + leaf form-factor { + type identityref { + base oc-opt-types:TRANSCEIVER_FORM_FACTOR_TYPE; + } + description + "Indicates the type of optical transceiver used on this + port. If the client port is built into the device and not + pluggable, then non-pluggable is the corresponding state. If + a device port supports multiple form factors (e.g. QSFP28 + and QSFP+, then the value of the transceiver installed shall + be reported. If no transceiver is present, then the value of + the highest rate form factor shall be reported + (QSFP28, for example)."; + } + + leaf connector-type { + type identityref { + base oc-opt-types:FIBER_CONNECTOR_TYPE; + } + description + "Connector type used on this port"; + } + + leaf vendor { + type string { + length 1..16; + } + description + "Full name of transceiver vendor. 16-octet field that + contains ASCII characters, left-aligned and padded on the + right with ASCII spaces (20h)"; + } + + leaf vendor-part { + type string { + length 1..16; + } + description + "Transceiver vendor's part number. 16-octet field that + contains ASCII characters, left-aligned and padded on the + right with ASCII spaces (20h). If part number is undefined, + all 16 octets = 0h"; + } + + leaf vendor-rev { + type string { + length 1..2; + } + description + "Transceiver vendor's revision number. 2-octet field that + contains ASCII characters, left-aligned and padded on the + right with ASCII spaces (20h)"; + } + + //TODO: these compliance code leaves should be active based on + //the type of port + leaf ethernet-pmd { + type identityref { + base oc-opt-types:ETHERNET_PMD_TYPE; + } + description + "Ethernet PMD (physical medium dependent sublayer) that the + transceiver supports. The SFF/QSFP MSAs have registers for + this and CFP MSA has similar."; + } + + leaf sonet-sdh-compliance-code { + type identityref { + base oc-opt-types:SONET_APPLICATION_CODE; + } + description + "SONET/SDH application code supported by the port"; + } + + leaf otn-compliance-code { + type identityref { + base oc-opt-types:OTN_APPLICATION_CODE; + } + description + "OTN application code supported by the port"; + } + + leaf serial-no { + type string { + length 1..16; + } + description + "Transceiver serial number. 16-octet field that contains + ASCII characters, left-aligned and padded on the right with + ASCII spaces (20h). If part serial number is undefined, all + 16 octets = 0h"; + } + + leaf date-code { + type oc-yang:date-and-time; + description + "Representation of the transceiver date code, typically + stored as YYMMDD. The time portion of the value is + undefined and not intended to be read."; + } + + leaf fault-condition { + type boolean; + description + "Indicates if a fault condition exists in the transceiver"; + } + + uses optical-power-state; + + } + + grouping port-transceiver-top { + description + "Top-level grouping for client port transceiver data"; + + container transceiver { + description + "Top-level container for client port transceiver data"; + + container config { + description + "Configuration data for client port transceivers"; + + uses port-transceiver-config; + } + + container state { + + config false; + + description + "Operational state data for client port transceivers"; + + uses port-transceiver-config; + uses port-transceiver-state; + } + // physical channels are associated with a transceiver + // component + uses physical-channel-top; + } + } + + // data definition statements + + // augment statements + + augment "/oc-platform:components/oc-platform:component" { + description + "Adding transceiver data to physical inventory"; + + uses port-transceiver-top { + when "current()/oc-platform:state/" + + "oc-platform:type = 'TRANSCEIVER'" { + description + "Augment is active when component is of type TRANSCEIVER"; + } + } + } + + augment "/oc-if:interfaces/oc-if:interface/oc-if:state" { + //TODO: add 'when' or other condition to make sure this + //leafref points to a component of type TRANSCEIVER. + description + "Adds a reference from the base interface to its corresponding + physical channels."; + + leaf-list physical-channel { + type leafref { + path "/oc-platform:components/" + + "oc-platform:component[oc-platform:name=current()/../oc-port:hardware-port]/" + + "oc-transceiver:transceiver/" + + "oc-transceiver:physical-channels/oc-transceiver:channel/" + + "oc-transceiver:index"; + } + description + "For a channelized interface, list of references to the + physical channels (lanes) corresponding to the interface."; + } + } + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-platform-types.yang b/src/plugins/yang/openconfig/openconfig-platform-types.yang new file mode 100644 index 0000000..a997439 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform-types.yang @@ -0,0 +1,271 @@ +module openconfig-platform-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform-types"; + + prefix "oc-platform-types"; + + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines data types (e.g., YANG identities) + to support the OpenConfig component inventory model."; + + oc-ext:openconfig-version "0.9.0"; + + revision "2018-05-05" { + description + "Added min-max-time to + avg-min-max-instant-stats-precision1-celsius, + added new CONTROLLER_CARD identity"; + reference "0.9.0"; + } + + revision "2018-01-16" { + description + "Added new per-component common data; add temp alarm"; + reference "0.8.0"; + } + + revision "2017-12-14" { + description + "Added anchor containers for component data, added new + component types"; + reference "0.7.0"; + } + + revision "2017-08-16" { + description + "Added power state enumerated type"; + reference "0.6.0"; + } + + revision "2016-12-22" { + description + "Added temperature state variable to component"; + reference "0.5.0"; + } + + // grouping statements + + + grouping avg-min-max-instant-stats-precision1-celsius { + description + "Common grouping for recording temperature values in + Celsius with 1 decimal precision. Values include the + instantaneous, average, minimum, and maximum statistics"; + + leaf instant { + type decimal64 { + fraction-digits 1; + } + units celsius; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 1; + } + units celsius; + description + "The arithmetic mean value of the statistic over the + sampling period."; + } + + leaf min { + type decimal64 { + fraction-digits 1; + } + units celsius; + description + "The minimum value of the statistic over the sampling + period"; + } + + leaf max { + type decimal64 { + fraction-digits 1; + } + units celsius; + description + "The maximum value of the statistic over the sampling + period"; + } + + uses oc-types:stat-interval-state; + uses oc-types:min-max-time; + } + + // identity statements + + identity OPENCONFIG_HARDWARE_COMPONENT { + description + "Base identity for hardware related components in a managed + device. Derived identities are partially based on contents + of the IANA Entity MIB."; + reference + "IANA Entity MIB and RFC 6933"; + } + + + identity OPENCONFIG_SOFTWARE_COMPONENT { + description + "Base identity for software-related components in a managed + device"; + } + + // hardware types + + identity CHASSIS { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Chassis component, typically with multiple slots / shelves"; + } + + identity BACKPLANE { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Backplane component for aggregating traffic, typically + contained in a chassis component"; + } + + identity FABRIC { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Interconnect between ingress and egress ports on the + device (e.g., a crossbar switch)."; + } + + identity POWER_SUPPLY { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Component that is supplying power to the device"; + } + + identity FAN { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Cooling fan, or could be some other heat-reduction component"; + } + + identity SENSOR { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Physical sensor, e.g., a temperature sensor in a chassis"; + } + + identity FRU { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Replaceable hardware component that does not have a more + specific defined schema."; + } + + identity LINECARD { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Linecard component, typically inserted into a chassis slot"; + } + + identity CONTROLLER_CARD { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "A type of linecard whose primary role is management or control + rather than data forwarding."; + } + + identity PORT { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Physical port, e.g., for attaching pluggables and networking + cables"; + } + + identity TRANSCEIVER { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Pluggable module present in a port"; + } + + identity CPU { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "Processing unit, e.g., a management processor"; + } + + identity STORAGE { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "A storage subsystem on the device (disk, SSD, etc.)"; + } + + identity INTEGRATED_CIRCUIT { + base OPENCONFIG_HARDWARE_COMPONENT; + description + "A special purpose processing unit, typically for traffic + switching/forwarding (e.g., switching ASIC, NPU, forwarding + chip, etc.)"; + } + + identity OPERATING_SYSTEM { + base OPENCONFIG_SOFTWARE_COMPONENT; + description + "Operating system running on a component"; + } + + + identity COMPONENT_OPER_STATUS { + description + "Current operational status of a platform component"; + } + + identity ACTIVE { + base COMPONENT_OPER_STATUS; + description + "Component is enabled and active (i.e., up)"; + } + + identity INACTIVE { + base COMPONENT_OPER_STATUS; + description + "Component is enabled but inactive (i.e., down)"; + } + + identity DISABLED { + base COMPONENT_OPER_STATUS; + description + "Component is administratively disabled."; + } + + // typedef statements + + typedef component-power-type { + type enumeration { + enum POWER_ENABLED { + description + "Enable power on the component"; + } + enum POWER_DISABLED { + description + "Disable power on the component"; + } + } + description + "A generic type reflecting whether a hardware component + is powered on or off"; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-platform.yang b/src/plugins/yang/openconfig/openconfig-platform.yang new file mode 100644 index 0000000..399cf24 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-platform.yang @@ -0,0 +1,762 @@ +module openconfig-platform { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/platform"; + + prefix "oc-platform"; + + import openconfig-platform-types { prefix oc-platform-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-alarm-types { prefix oc-alarm-types; } + import openconfig-yang-types { prefix oc-yang; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines a data model for representing a system + component inventory, which can include hardware or software + elements arranged in an arbitrary structure. The primary + relationship supported by the model is containment, e.g., + components containing subcomponents. + + It is expected that this model reflects every field replacable + unit on the device at a minimum (i.e., additional information + may be supplied about non-replacable components). + + Every element in the inventory is termed a 'component' with each + component expected to have a unique name and type, and optionally + a unique system-assigned identifier and FRU number. The + uniqueness is guaranteed by the system within the device. + + Components may have properties defined by the system that are + modeled as a list of key-value pairs. These may or may not be + user-configurable. The model provides a flag for the system + to optionally indicate which properties are user configurable. + + Each component also has a list of 'subcomponents' which are + references to other components. Appearance in a list of + subcomponents indicates a containment relationship as described + above. For example, a linecard component may have a list of + references to port components that reside on the linecard. + + This schema is generic to allow devices to express their own + platform-specific structure. It may be augmented by additional + component type-specific schemas that provide a common structure + for well-known component types. In these cases, the system is + expected to populate the common component schema, and may + optionally also represent the component and its properties in the + generic structure. + + The properties for each component may include dynamic values, + e.g., in the 'state' part of the schema. For example, a CPU + component may report its utilization, temperature, or other + physical properties. The intent is to capture all platform- + specific physical data in one location, including inventory + (presence or absence of a component) and state (physical + attributes or status)."; + + oc-ext:openconfig-version "0.12.0"; + + revision "2018-06-29" { + description + "Added location description for components"; + reference "0.12.0"; + } + + revision "2018-06-03" { + description + "Added parent reference, empty flag and preconfiguration + for components"; + reference "0.11.0"; + } + + revision "2018-04-20" { + description + "Added new per-component state data: mfg-date and removable"; + reference "0.10.0"; + } + + revision "2018-01-30" { + description + "Amended approach for modelling CPU - rather than having + a local CPU utilisation state variable, a component with + a CPU should create a subcomponent of type CPU to report + statistics."; + reference "0.9.0"; + } + + revision "2018-01-16" { + description + "Added new per-component common data; add temp alarm; + moved hardware-port reference to port model"; + reference "0.8.0"; + } + + revision "2017-12-14" { + description + "Added anchor containers for component data, added new + component types"; + reference "0.7.0"; + } + + revision "2017-08-16" { + description + "Added power state enumerated type"; + reference "0.6.0"; + } + + revision "2016-12-22" { + description + "Added temperature state variable to component"; + reference "0.5.0"; + } + + // grouping statements + + + grouping platform-component-properties-config { + description + "System-defined configuration data for component properties"; + + leaf name { + type string; + description + "System-supplied name of the property -- this is typically + non-configurable"; + } + + leaf value { + type union { + type string; + type boolean; + type int64; + type uint64; + type decimal64 { + fraction-digits 2; + } + } + description + "Property values can take on a variety of types. Signed and + unsigned integer types may be provided in smaller sizes, + e.g., int8, uint16, etc."; + } + } + + grouping platform-component-properties-state { + description + "Operational state data for component properties"; + + leaf configurable { + type boolean; + description + "Indication whether the property is user-configurable"; + } + } + + grouping platform-component-properties-top { + description + "Top-level grouping "; + + container properties { + description + "Enclosing container "; + + list property { + key "name"; + description + "List of system properties for the component"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the property name."; + } + + container config { + description + "Configuration data for each property"; + + uses platform-component-properties-config; + } + + container state { + + config false; + + description + "Operational state data for each property"; + + uses platform-component-properties-config; + uses platform-component-properties-state; + } + } + } + } + + grouping platform-subcomponent-ref-config { + description + "Configuration data for subcomponent references"; + + leaf name { + type leafref { + path "../../../../../component/config/name"; + } + description + "Reference to the name of the subcomponent"; + } + } + + grouping platform-subcomponent-ref-state { + description + "Operational state data for subcomponent references"; + + } + + grouping platform-subcomponent-ref-top { + description + "Top-level grouping for list of subcomponent references"; + + container subcomponents { + description + "Enclosing container for subcomponent references"; + + list subcomponent { + key "name"; + description + "List of subcomponent references"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the name list key"; + } + + container config { + description + "Configuration data for the subcomponent"; + + uses platform-subcomponent-ref-config; + } + + container state { + + config false; + + description + "Operational state data for the subcomponent"; + + uses platform-subcomponent-ref-config; + uses platform-subcomponent-ref-state; + } + } + } + } + + grouping platform-component-config { + description + "Configuration data for components"; + + leaf name { + type string; + description + "Device name for the component -- this may not be a + configurable parameter on many implementations. Where + component preconfiguration is supported, for example, + the component name may be configurable."; + } + } + + grouping platform-component-state { + description + "Operational state data for device components."; + + leaf type { + type union { + type identityref { + base oc-platform-types:OPENCONFIG_HARDWARE_COMPONENT; + } + type identityref { + base oc-platform-types:OPENCONFIG_SOFTWARE_COMPONENT; + } + } + description + "Type of component as identified by the system"; + } + + leaf id { + type string; + description + "Unique identifier assigned by the system for the + component"; + } + + leaf location { + type string; + description + "System-supplied description of the location of the + component within the system. This could be a bay position, + slot number, socket location, etc. For component types that + have an explicit slot-id attribute, such as linecards, the + system should populate the more specific slot-id."; + } + + leaf description { + type string; + description + "System-supplied description of the component"; + } + + leaf mfg-name { + type string; + description + "System-supplied identifier for the manufacturer of the + component. This data is particularly useful when a + component manufacturer is different than the overall + device vendor."; + } + + leaf mfg-date { + type oc-yang:date; + description + "System-supplied representation of the component's + manufacturing date."; + } + + leaf hardware-version { + type string; + description + "For hardware components, this is the hardware revision of + the component."; + } + + leaf firmware-version { + type string; + description + "For hardware components, this is the version of associated + firmware that is running on the component, if applicable."; + } + + leaf software-version { + type string; + description + "For software components such as operating system or other + software module, this is the version of the currently + running software."; + } + + leaf serial-no { + type string; + description + "System-assigned serial number of the component."; + } + + leaf part-no { + type string; + description + "System-assigned part number for the component. This should + be present in particular if the component is also an FRU + (field replaceable unit)"; + } + + leaf removable { + type boolean; + description + "If true, this component is removable or is a field + replaceable unit"; + } + + leaf oper-status { + type identityref { + base oc-platform-types:COMPONENT_OPER_STATUS; + } + description + "If applicable, this reports the current operational status + of the component."; + } + + leaf empty { + type boolean; + default false; + description + "The empty leaf may be used by the device to indicate that a + component position exists but is not populated. Using this + flag, it is possible for the management system to learn how + many positions are available (e.g., occupied vs. empty + linecard slots in a chassis)."; + } + + leaf parent { + type leafref { + path "../../config/name"; + } + description + "Reference to the name of the parent component. Note that + this reference must be kept synchronized with the + corresponding subcomponent reference from the parent + component."; + } + } + + grouping platform-component-temp-alarm-state { + description + "Temperature alarm data for platform components"; + + // TODO(aashaikh): consider if these leaves could be in a + // reusable grouping (not temperature-specific); threshold + // may always need to be units specific. + + leaf alarm-status { + type boolean; + description + "A value of true indicates the alarm has been raised or + asserted. The value should be false when the alarm is + cleared."; + } + + leaf alarm-threshold { + type uint32; + description + "The threshold value that was crossed for this alarm."; + } + + leaf alarm-severity { + type identityref { + base oc-alarm-types:OPENCONFIG_ALARM_SEVERITY; + } + description + "The severity of the current alarm."; + } + } + + grouping platform-component-power-state { + description + "Power-related operational state for device components."; + + leaf allocated-power { + type uint32; + units watts; + description + "Power allocated by the system for the component."; + } + + leaf used-power { + type uint32; + units watts; + description + "Actual power used by the component."; + } + } + + grouping platform-component-temp-state { + description + "Temperature state data for device components"; + + container temperature { + description + "Temperature in degrees Celsius of the component. Values include + the instantaneous, average, minimum, and maximum statistics. If + avg/min/max statistics are not supported, the target is expected + to just supply the instant value"; + + uses oc-platform-types:avg-min-max-instant-stats-precision1-celsius; + uses platform-component-temp-alarm-state; + } + } + + grouping platform-component-memory-state { + description + "Per-component memory statistics"; + + container memory { + description + "For components that have associated memory, these values + report information about available and utilized memory."; + + leaf available { + type uint64; + units bytes; + description + "The available memory physically installed, or logically + allocated to the component."; + } + + // TODO(aashaikh): consider if this needs to be a + // min/max/avg statistic + leaf utilized { + type uint64; + units bytes; + description + "The memory currently in use by processes running on + the component, not considering reserved memory that is + not available for use."; + } + } + } + + grouping platform-anchors-top { + description + "This grouping is used to add containers for components that + are common across systems, but do not have a defined schema + within the openconfig-platform module. Containers should be + added to this grouping for components that are expected to + exist in multiple systems, with corresponding modules + augmenting the config/state containers directly."; + + container chassis { + description + "Data for chassis components"; + + container config { + description + "Configuration data for chassis components"; + } + + container state { + config false; + description + "Operational state data for chassis components"; + } + } + +// TODO(aashaikh): linecard container is already defined in +// openconfig-platform-linecard; will move to this module +// in future. + /* + container linecard { + description + "Data for linecard components"; + + container config { + description + "Configuration data for linecard components"; + } + + container state { + config false; + description + "Operational state data for linecard components"; + } + } + */ + + container port { + description + "Data for physical port components"; + + container config { + description + "Configuration data for physical port components"; + } + + container state { + config false; + description + "Operational state data for physical port components"; + } + } + +// TODO(aashaikh): transceiver container is already defined in +// openconfig-platform-transceiver; will move to this module +// in future. + /* + container transceiver { + description + "Data for transceiver components"; + + container config { + description + "Configuration data for transceiver components"; + } + + container state { + config false; + description + "Operational state data for transceiver components"; + } + } + */ + + container power-supply { + description + "Data for power supply components"; + + container config { + description + "Configuration data for power supply components"; + } + + container state { + config false; + description + "Operational state data for power supply components"; + } + } + + container fan { + description + "Data for fan components"; + + container config { + description + "Configuration data for fan components"; + } + + container state { + config false; + description + "Operational state data for fan components"; + } + } + + container fabric { + description + "Data for fabric components"; + + container config { + description + "Configuration data for fabric components"; + } + + container state { + config false; + description + "Operational state data for fabric components"; + } + } + + container storage { + description + "Data for storage components"; + + container config { + description + "Configuration data for storage components"; + } + + container state { + config false; + description + "Operational state data for storage components"; + } + } + + container cpu { + description + "Data for cpu components"; + + container config { + description + "Configuration data for cpu components"; + } + + container state { + config false; + description + "Operational state data for cpu components"; + } + } + + container integrated-circuit { + description + "Data for chip components, such as ASIC, NPUs, etc."; + + container config { + description + "Configuration data for chip components"; + } + + container state { + config false; + description + "Operational state data for chip components"; + } + } + + container backplane { + description + "Data for backplane components"; + + container config { + description + "Configuration data for backplane components"; + } + + container state { + config false; + description + "Operational state data for backplane components"; + } + } + } + + grouping platform-component-top { + description + "Top-level grouping for components in the device inventory"; + + container components { + description + "Enclosing container for the components in the system."; + + list component { + key "name"; + description + "List of components, keyed by component name."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "References the component name"; + } + + container config { + description + "Configuration data for each component"; + + uses platform-component-config; + } + + container state { + + config false; + + description + "Operational state data for each component"; + + uses platform-component-config; + uses platform-component-state; + uses platform-component-temp-state; + uses platform-component-memory-state; + uses platform-component-power-state; + } + + uses platform-component-properties-top; + uses platform-subcomponent-ref-top; + uses platform-anchors-top; + } + } + } + + + // data definition statements + + uses platform-component-top; + + + // augments + + +} diff --git a/src/plugins/yang/openconfig/openconfig-policy-forwarding.yang b/src/plugins/yang/openconfig/openconfig-policy-forwarding.yang new file mode 100644 index 0000000..63dbf78 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-policy-forwarding.yang @@ -0,0 +1,119 @@ +module openconfig-policy-forwarding { + yang-version "1"; + + namespace "http://openconfig.net/yang/policy-forwarding"; + + prefix "oc-pf"; + + import openconfig-extensions { prefix "oc-ext"; } + + // Include submodules. + include openconfig-pf-forwarding-policies; + include openconfig-pf-path-groups; + include openconfig-pf-interfaces; + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + relating to policy-based forwarding. Policy-based forwarding is + utilised when a system chooses how to forward packets (including + applying data-plane operations such as encapsulation or + decapsulation) based on policies other than destination L2 or L3 + header. Typically, systems may implement: + + - IP policy-based routing, where routing may be done based on the + source plus destination of an IP packet; information within the + L4 header; or some combination of both. + - Encapsulation or decapsulation based on certain policy + information - for example, matching particular IP destinations + and decapsulating GRE headers. + - Class-based selection of egress routes - such as class-based + selection of an egress MPLS path. + + The policies that are defined in this model are applied to a + particular ingress context of a network element (e.g., interface) + and are defined to apply following other interface policy such as + QoS classification and access control lists. + + This module defines: + + - policy-forwarding + | + |--- policies + | |-- policy + | |-- [match criteria] How packets are defined to + | | match policy. + | |-- [forwarding-action] How packets matching should + | be forwarded. + |--- interfaces + | |-- interfaces + | | -- apply-forwarding-policy Forwarding policy to + | used on the interface. + |--- path-selection-groups + |-- path-selection-group A group of forwarding resources + that are grouped for purposes + of next-hop selection. + + A forwarding-policy specifies the match criteria that it intends + to use to determine the packets that it reroutes - this may + consist of a number of criteria, such as DSCP. The action of the + policy results in a forwarding action being applied to matching + packets. For example, decapsulating the packet from a GRE header. + In order to enact the policy based on particular interfaces - the + forwarding-policy is applied to an interface via referencing it + within an 'apply-forwarding-policy' statement associated with an + interface. + + In some cases (e.g., Class-Based Tunnel Selection) the forwarding + action does not resolve to a single egress action, and rather + normal forwarding rules are to be applied but considering a subset + of forwarding resources. In these cases, a path-selection-group + can be created, referencing the subset of forwarding paths that + should be used for the egress selection. In the case that a subset + of MPLS LSPs are eligible for, say, DSCP 46 marked packets, a + path-selection-group is created, referencing the subset of LSPs. + The forwarding action of the corresponding policy is set to + PATH_GROUP and references the configured group of LSPs."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2017-06-21" { + description + "Amend policy forwarding model based on ACL changes."; + reference "0.2.0"; + } + + revision "2017-02-28" { + description + "Initial public release of policy forwarding."; + reference "0.1.0"; + } + + revision "2016-11-08" { + description + "Initial revision."; + reference "0.0.1"; + } + + + grouping policy-forwarding-top { + description + "Top-level grouping for Policy Forwarding"; + + container policy-forwarding { + description + "Configuration and operational state relating to policy-forwarding within + a network instance."; + + uses pf-forwarding-policy-structural; + uses pf-interfaces-structural; + uses pf-path-groups-structural; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-policy-types.yang b/src/plugins/yang/openconfig/openconfig-policy-types.yang new file mode 100644 index 0000000..ef47f33 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-policy-types.yang @@ -0,0 +1,220 @@ +module openconfig-policy-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/policy-types"; + + prefix "oc-pol-types"; + + // import some basic types + import ietf-yang-types { prefix yang; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module contains general data definitions for use in routing + policy. It can be imported by modules that contain protocol- + specific policy conditions and actions."; + + oc-ext:openconfig-version "3.1.0"; + + revision "2018-06-05" { + description + "Add PIM, IGMP to INSTALL_PROTOCOL_TYPES identity"; + reference "3.1.0"; + } + + revision "2017-07-14" { + description + "Replace policy choice node/type with policy-result + enumeration;simplified defined set naming;removed generic + IGP actions; migrate to OpenConfig types; added mode for + prefix sets"; + reference "3.0.0"; + } + + revision "2016-05-12" { + description + "OpenConfig public release"; + reference "2.0.1"; + } + + // identity statements + + identity ATTRIBUTE_COMPARISON { + description + "base type for supported comparison operators on route + attributes"; + } + + identity ATTRIBUTE_EQ { + base ATTRIBUTE_COMPARISON; + description "== comparison"; + } + + identity ATTRIBUTE_GE { + base ATTRIBUTE_COMPARISON; + description ">= comparison"; + } + + identity ATTRIBUTE_LE { + base ATTRIBUTE_COMPARISON; + description "<= comparison"; + } + + typedef match-set-options-type { + type enumeration { + enum ANY { + description "match is true if given value matches any member + of the defined set"; + } + enum ALL { + description "match is true if given value matches all + members of the defined set"; + } + enum INVERT { + description "match is true if given value does not match any + member of the defined set"; + } + } + default ANY; + description + "Options that govern the behavior of a match statement. The + default behavior is ANY, i.e., the given value matches any + of the members of the defined set"; + } + + typedef match-set-options-restricted-type { + type enumeration { + enum ANY { + description "match is true if given value matches any member + of the defined set"; + } + enum INVERT { + description "match is true if given value does not match any + member of the defined set"; + } + } + default ANY; + description + "Options that govern the behavior of a match statement. The + default behavior is ANY, i.e., the given value matches any + of the members of the defined set. Note this type is a + restricted version of the match-set-options-type."; + //TODO: restriction on enumerated types is only allowed in + //YANG 1.1. Until then, we will require this additional type + } + + grouping attribute-compare-operators { + description "common definitions for comparison operations in + condition statements"; + + leaf operator { + type identityref { + base ATTRIBUTE_COMPARISON; + } + description + "type of comparison to be performed"; + } + + leaf value { + type uint32; + description + "value to compare with the community count"; + } + } + + typedef tag-type { + type union { + type uint32; + type yang:hex-string; + } + description "type for expressing route tags on a local system, + including IS-IS and OSPF; may be expressed as either decimal or + hexidecimal integer"; + reference + "RFC 2178 OSPF Version 2 + RFC 5130 A Policy Control Mechanism in IS-IS Using + Administrative Tags"; + } + + identity INSTALL_PROTOCOL_TYPE { + description + "Base type for routing protocols, including those which may + install prefixes into the RIB"; + } + + identity BGP { + base INSTALL_PROTOCOL_TYPE; + description + "BGP"; + reference + "RFC 4271"; + } + + identity ISIS { + base INSTALL_PROTOCOL_TYPE; + description + "IS-IS"; + reference + "ISO/IEC 10589"; + } + + identity OSPF { + base INSTALL_PROTOCOL_TYPE; + description + "OSPFv2"; + reference + "RFC 2328"; + } + + identity OSPF3 { + base INSTALL_PROTOCOL_TYPE; + description + "OSPFv3"; + reference + "RFC 5340"; + } + + identity STATIC { + base INSTALL_PROTOCOL_TYPE; + description + "Locally-installed static route"; + } + + identity DIRECTLY_CONNECTED { + base INSTALL_PROTOCOL_TYPE; + description + "A directly connected route"; + } + + identity LOCAL_AGGREGATE { + base INSTALL_PROTOCOL_TYPE; + description + "Locally defined aggregate route"; + } + + identity PIM { + base INSTALL_PROTOCOL_TYPE; + description + "Protocol Independent Multicast"; + reference + "RFC 7761"; + } + + identity IGMP { + base INSTALL_PROTOCOL_TYPE; + description + "Internet Group Management Protocol"; + reference + "RFC 3376"; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-probes-types.yang b/src/plugins/yang/openconfig/openconfig-probes-types.yang new file mode 100644 index 0000000..0b4e1bd --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-probes-types.yang @@ -0,0 +1,75 @@ +module openconfig-probes-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/probes/types"; + + prefix "oc-probes-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types related to the probes."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2017-09-05" { + description + "Initial public revision"; + reference "0.1.0"; + } + + typedef test-type { + type enumeration { + enum ICMP { + description + "Send ICMP echo requests."; + } + enum ICMP6 { + description + "Send ICMP6 echo requests."; + } + enum ICMP_TIMESTAMP { + description + "Send ICMP timestamp requests."; + } + enum ICMP6_TIMESTAMP { + description + "Sedn ICMP6 timestamp requests."; + } + enum TCP { + description + "Send TPC packets."; + } + enum UDP { + description + "Send UDP packets."; + } + enum UDP_TIMESTAMP { + description + "Send UDP packets with timestamp."; + } + enum HTTP_GET { + description + "Execute HTTP GET requests."; + } + enum HTTP_GET_META { + description + "Execute HTTP GET requests of metadata."; + } + } + description + "Type definition with enumerations describing the basis of + the probe test type identifier"; + } + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-probes.yang b/src/plugins/yang/openconfig/openconfig-probes.yang new file mode 100644 index 0000000..8c179f3 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-probes.yang @@ -0,0 +1,569 @@ +module openconfig-probes { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/probes"; + + prefix "oc-probes"; + + import ietf-yang-types { prefix yang; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + import openconfig-probes-types { prefix oc-probes-types; } + + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + for the probes. + A probe consists on a group of tests, each test being a + source-destination pair to poll. The destination can be either + IP Address (and eventually port) or URL, depending on the + nature of the test. The test can send ICMP, UDP, TCP, or HTTP + requests. + Each test groups a list of test items, the test results + being an overall view or average of the items list. + However, the test preserves only a limited set of history + items, whose length can be controlled using the history-size."; + + oc-ext:openconfig-version "0.0.1"; + + revision "2017-09-05" { + description + "Initial public revision"; + reference "0.0.1"; + } + +grouping test-target { + description + "Groups the config and state containers + for an individual test."; + + container target { + description + "The target configuration of the test. + The nature of the target depends on the probe type: + for HTTP probes we need to provide an URL to poll, + while ICMP probes require an IP address to monitor."; + + container config { + description + "Configuration data for the test target."; + + uses test-target-base; + } + + container state { + config false; + + description + "Operational data for the test target."; + + uses test-target-base; + } + + } + +} + + grouping test-target-base { + description + "Targe types for the probe test."; + + leaf address { + type oc-inet:ip-address; + description + "IP address of the target, either IPv4 or IPv6."; + } + + leaf port { + type oc-inet:port-number; + description + "Destination port."; + } + + leaf url { + type oc-inet:url; + description + "Target URL to probe."; + } + +} + + grouping probe-test-config-base { + description + "Definition of test details."; + + leaf test-type { + type oc-probes-types:test-type; + description + "The type of the probe test."; + mandatory true; + } + + leaf count { + type yang:counter64; + description + "The number of probes per test."; + } + + leaf interval { + type yang:counter64; + description + "Time between two consecutive probes."; + } + + leaf source { + type oc-inet:ip-address; + description + "Source address used when probing, either IPv4 or IPv6."; + } + + leaf history-size { + type yang:counter64; + description + "The number of history entries stored."; + } + + leaf source-port { + type oc-inet:port-number; + description + "Source number used."; + } + + leaf dscp { + type oc-inet:dscp; + description + "DSCP code points"; + } + + } + + grouping probe-test-state-history-item-base { + description + "The test item results counters and statistics. + An item presents the results of a single execution + of the test. + The results of the test depend on the values + of the total items, or an average over a certain + period of time."; + + leaf id { + type yang:counter64; + description + "The test item ID."; + } + + leaf timestamp { + type oc-types:timeticks64; + description + "The test timestamp. + This is not the timestamp when the test + was actually executed nither when it finished. + Should be the timestamp when the test has been scheduled. + It may not be the same with start-timestamp."; + } + + leaf start-timestamp { + type oc-types:timeticks64; + description + "The timestamp when the test started."; + } + + leaf end-timestamp { + type oc-types:timeticks64; + description + "The timestamp when the test finished."; + } + + leaf test-duration { + type yang:counter64; + description + "The duration of the test, in microseconds."; + } + + leaf failed { + type boolean; + description + "Whether the test failed or succeeded."; + } + + leaf probes-sent { + type yang:counter64; + description + "Number of test probes sent."; + } + + leaf probes-received { + type yang:counter64; + description + "Number of test probes received."; + } + + leaf loss-percentage { + type oc-types:percentage; + description + "The loss percentage."; + } + + leaf jitter { + type yang:counter64; + description + "The round trip jitter, in microseconds."; + } + + leaf min-delay { + type yang:counter64; + description + "The minimum delay recorded during the test, in microseconds."; + } + + leaf max-delay { + type yang:counter64; + description + "The maximum delay recorded during the test, in microseconds."; + } + + leaf avg-delay { + type yang:counter64; + description + "The average delay recorded during the test, in microseconds."; + } + + leaf stddev-delay { + type yang:counter64; + description + "The standard deviation of the delay of the test."; + } + + } + + grouping probe-test-state-history-item { + description + "A history item of the probe results."; + + container state { + + config false; + + description + "A history item of the probe results: operational data only."; + + uses probe-test-state-history-item-base; + } + + } + + grouping probe-test-state-history { + + description + "The history of the test results."; + + container items { + + description + "The list of items in the probe history. + The length depends on the history size."; + + list item { + key "id"; + description + "List of history items."; + + leaf id { + type leafref { + path "../state/id"; + } + description + "Reference to the history entry ID."; + } + + uses probe-test-state-history-item; + } + + } + + } + + grouping probe-test-state-results { + description + "The test results counters and statistics."; + + leaf timestamp { + type oc-types:timeticks64; + description + "The test timestamp. + This is not the timestamp when the test + was actually executed nither when it finished. + Should be the timestamp when the test has been scheduled. + It may not be the same with start-timestamp."; + } + + leaf start-timestamp { + type oc-types:timeticks64; + description + "The timestamp when the test started."; + } + + leaf last-test-timestamp { + type oc-types:timeticks64; + description + "The timestamp when the test finished."; + } + + leaf test-duration { + type yang:counter64; + description + "The duration of the test, in microseconds."; + } + + leaf failed { + type boolean; + description + "Whether the test failed or succeeded."; + } + + leaf probes-sent { + type yang:counter64; + description + "Number of test probes sent."; + } + + leaf probes-received { + type yang:counter64; + description + "Number of test probes received."; + } + + leaf loss-percentage { + type oc-types:percentage; + description + "The loss percentage."; + } + + leaf jitter { + type yang:counter64; + description + "The round trip jitter, in microseconds."; + } + + leaf min-delay { + type yang:counter64; + description + "The minimum delay recorded during the test, in microseconds."; + } + + leaf max-delay { + type yang:counter64; + description + "The maximum delay recorded during the test, in microseconds."; + } + + leaf avg-delay { + type yang:counter64; + description + "The average delay recorded during the test, in microseconds."; + } + + leaf stddev-delay { + type yang:counter64; + description + "The standard deviation of the delay of the test."; + } + + + } + + grouping probe-test-state { + + description + "Operational data and results for the probes."; + + } + + grouping probe-test-config { + description + "Definition of test details."; + + leaf name { + type string; + description + "The name of the test probe"; + mandatory true; + } + + leaf enabled { + type boolean; + default true; + description + "Whether the test is enabled."; + } + + uses probe-test-config-base; + + } + + grouping probe-tests-top { + description + "Top-level grouping for the tests withing a probe."; + + list test { + key "name"; + description + "List of tests associated with this probe."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for the test of this probe."; + + uses probe-test-config; + } + + container state { + + config false; + + description + "Operational state data"; + + uses probe-test-config; + uses probe-test-state; + } + + uses test-target; + + container results { + description + "Contains the results of the tests."; + + container state { + + config false; + + description + "Results of this test: operational data only"; + + uses probe-test-state-results; + } + + container history { + + config false; + + description + "Historical data of the tests."; + + uses probe-test-state-history; + } + + } + + } + // end list of probes + + } + + grouping probe-config { + description + "Definition of probe details."; + + leaf name { + type string; + description + "The name of the probe."; + mandatory true; + } + + leaf enabled { + type boolean; + default true; + description + "Whether the probe is enabled."; + } + + } + + grouping probe-state { + description + "Definition of probes operation data."; + } + + grouping probes-top { + description + "Top-level grouping for probes model"; + + list probe { + key "name"; + description + "List of probes configured."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for the probes."; + + uses probe-config; + } + + container state { + + config false; + + description + "Operational state data"; + + uses probe-config; + uses probe-state; + } + + container tests { + + description + "The tests associated to be executed for the probe."; + + uses probe-tests-top; + } + + } + // end list of probes + + } + + grouping openconfig-probes-top { + + description + "The top level grouping of the probes model."; + + container probes { + description + "The container containing the list of probes."; + + uses probes-top; + } + + } + + uses openconfig-probes-top; + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-procmon.yang b/src/plugins/yang/openconfig/openconfig-procmon.yang new file mode 100644 index 0000000..fa3bbde --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-procmon.yang @@ -0,0 +1,165 @@ +module openconfig-procmon { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/system/procmon"; + + prefix "oc-proc"; + + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module provides data definitions for process health + monitoring of one or more processes running on the system."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // grouping statements + + grouping procmon-processes-top { + description + "Top level grouping for attributes for processes."; + + container processes { + description + "Parameters related to all monitored processes"; + + list process { + key "pid"; + config false; + description + "List of monitored processes"; + + leaf pid { + type leafref { + path "../state/pid"; + } + description + "Reference to the process pid key"; + } + + container state { + config false; + description + "State parameters related to monitored processes"; + + uses procmon-process-attributes-state; + } + } + } + } + + grouping procmon-process-attributes-state { + description + "Attributes state definitions for a process"; + + leaf pid { + type uint64; + description + "The process pid"; + } + + leaf name { + type string; + description + "The process name"; + } + + leaf-list args { + type string; + description + "Current process command line arguments. Arguments with + a parameter (e.g., --option 10 or -option=10) should be + represented as a single element of the list with the + argument name and parameter together. Flag arguments, i.e., + those without a parameter should also be in their own list + element."; + } + + leaf start-time { + type uint64; + units "ns"; + description + "The time at which this process started, + reported as nanoseconds since the UNIX epoch. The + system must be synchronized such that the start-time + can be reported accurately, otherwise it should not be + reported."; + } + + leaf uptime { + type oc-types:timeticks64; + description + "Amount of time elapsed since this process started."; + } + + leaf cpu-usage-user { + type oc-types:timeticks64; + description + "CPU time consumed by this process in user mode."; + } + + leaf cpu-usage-system { + type oc-types:timeticks64; + description + "CPU time consumed by this process in kernel mode."; + } + + leaf cpu-utilization { + type oc-types:percentage; + description + "The percentage of CPU that is being used by the process."; + } + + leaf memory-usage { + type uint64; + units "bytes"; + description + "Bytes allocated and still in use by the process"; + } + + leaf memory-utilization { + type oc-types:percentage; + description + "The percentage of RAM that is being used by the process."; + } + } + + // augment statements + + // rpc statements + + // notification statements +} diff --git a/src/plugins/yang/openconfig/openconfig-qos-elements.yang b/src/plugins/yang/openconfig/openconfig-qos-elements.yang new file mode 100644 index 0000000..b862db2 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-qos-elements.yang @@ -0,0 +1,1304 @@ +submodule openconfig-qos-elements { + + belongs-to openconfig-qos { + prefix "oc-qos"; + } + + import openconfig-extensions { prefix oc-ext; } + import openconfig-qos-types { prefix oc-qos-types; } + import openconfig-packet-match { prefix oc-pkt-match; } + import openconfig-platform { prefix oc-platform; } + import openconfig-types { prefix oc-types; } + + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This submodule defines configuration and operational state + data associated with QoS elements. The primary elements of + the model include: + + classifiers: match packets with a specific characteristic + + forwarding groups: logical class of packets that receive + common forwarding treatment + + queues: collection of packets to be scheduled, including + a queue management scheme + + schedulers: sequence of one more elements that schedule + packets for transmission, including policer and shaper + functions"; + + oc-ext:openconfig-version "0.2.0"; + + revision "2016-12-16" { + description + "Fix incorrect interface-ref placement"; + reference "0.2.0"; + } + + revision "2016-06-03" { + description + "Initial revision"; + reference "0.1.0"; + } + + grouping qos-classifier-term-config { + description + "Configuration data for list of match criteria in a QoS + classifier"; + + leaf id { + type string; + description + "Identifier for the match term"; + } + } + + grouping qos-classifier-term-state { + description + "Operational state data for list of match criteria in a QoS + classifier"; + } + + grouping qos-classifier-term-action-config { + description + "Configuration parameters for actions for a classifier term."; + + leaf target-group { + type leafref { + // Current location: + // /qos/classifiers/classifier/terms/term/actions/config/target-group + path "../../../../../../../forwarding-groups/forwarding-group/" + + "config/name"; + } + description + "References the forwarding group or class to which the + matched packets should be assigned"; + } + } + + grouping qos-classifier-terms-top { + description + "Top-level grouping for list of match criteria in a QoS + classifier"; + + container terms { + description + "Enclosing container for ths list of terms"; + + list term { + key "id"; + description + "List of match terms used in the classifier"; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to id list key."; + } + + container config { + description + "Configuration data for list of match criteria in a QoS + classifier"; + + uses qos-classifier-term-config; + } + + container state { + config false; + description + "Operational state data for list of match criteria in a + QoS classifier"; + + uses qos-classifier-term-config; + uses qos-classifier-term-state; + } + + container conditions { + description + "Conditions for the classifier term. Packets must match all of + the criteria specified within the match condition to be considered + matching the term."; + + // TODO(robjs): Consider whether we should have classifiers + // that can match >1 different value of a field, or whether + // this should require different match terms within the + // classifier. + uses oc-pkt-match:ethernet-header-top; + uses oc-pkt-match:ipv4-protocol-fields-top; + uses oc-pkt-match:ipv6-protocol-fields-top; + uses oc-pkt-match:transport-fields-top; + uses oc-pkt-match:mpls-header-top; + } + + container actions { + description + "Actions to be applied for packets matching the specified + classification rules."; + + container config { + description + "Actions to be applied to packets that match the classifier + term."; + + uses qos-classifier-term-action-config; + } + + container state { + config false; + description + "Operational state parameters associated with classifier term + actions"; + + uses qos-classifier-term-action-config; + } + + container remark { + description + "Remark actions to be associated with packets that match the + classifier term. Where a packet matches these criteria, the + specified rewrite actions should be performed."; + + uses qos-common-remark-actions; + } + } + } + } + } + + grouping qos-classifier-config { + description + "Configuration data for classifiers"; + + leaf name { + type string; + description + "User-assigned name of the classifier"; + } + + leaf type { + type enumeration { + enum IPV4 { + description + "Classifier matches and operates + on packets with IPv4 headers."; + } + enum IPV6 { + description + "Classifier matches and operates + on packets with IPv6 headers."; + } + enum MPLS { + description + "Classifier matches and operates + on packets with MPLS headers."; + } + enum ETHERNET { + description + "Classifier matches and operates + on fields within the L2 ETHERNET + headers."; + } + } + description + "Type of classifier."; + } + } + + grouping qos-classifier-state { + description + "Operational state data for classifiers"; + + } + + grouping qos-classifier-top { + description + "Top-level grouping for classifier data"; + + container classifiers { + description + "Enclosing container for QoS classifiers"; + + list classifier { + key "name"; + description + "List of classifier elements"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to list key name"; + } + + container config { + description + "Configuration data for classifers"; + + uses qos-classifier-config; + } + + container state { + config false; + description + "Operational state data for classifiers"; + + uses qos-classifier-config; + uses qos-classifier-state; + } + + uses qos-classifier-terms-top; + } + } + } + + grouping qos-fabric-trace-config { + description + "Configuration data for fabric trace data"; + + leaf source { + type leafref { + path "/oc-platform:components/oc-platform:component" + + "/oc-platform:config/oc-platform:name"; + } + description + "Source component for fabric trace data"; + } + + leaf dest { + type leafref { + path "/oc-platform:components/oc-platform:component" + + "/oc-platform:config/oc-platform:name"; + } + description + "Destination component for fabric trace data"; + } + } + + grouping qos-forwarding-group-config { + description + "Configuration data for forwarding groups"; + + leaf name { + type string; + description + "Name of the forwarding group"; + } + + // TODO(robjs, Simon G): Discuss optionally moving + // this to a high/low priority indicator, if this + // is common across implementations. + leaf fabric-priority { + type uint8; + description + "Set the priority for the forwarding group for + local transmission through the device, e.g., + across a switching fabric. Higher priorities + are considered to be better, such that traffic + with fabric priority 128 is considered to be + higher priority than that with fabric priority + 0."; + } + + leaf output-queue { + type leafref { + path "../../../../queues/queue/config/name"; + } + description + "Queue for packets in this forwarding group."; + } + } + + grouping qos-forwarding-group-state { + description + "Operational state data for forwarding groups"; + } + + grouping qos-forwarding-group-top { + description + "Top-level grouping for forwarding group data"; + + container forwarding-groups { + description + "Enclosing container for list of forwarding groups"; + + list forwarding-group { + key "name"; + description + "List of forwarding groups. Forwarding groups are + logical groups of traffic that will receive common + forwarding treatment."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to name list key"; + } + + container config { + description + "Configuration data for forwarding groups"; + + uses qos-forwarding-group-config; + } + + container state { + config false; + description + "Operational state data for forwarding groups"; + + uses qos-forwarding-group-config; + uses qos-forwarding-group-state; + } + } + } + } + + grouping qos-queue-red-common-config { + description + "Common configuration parameters applicable to RED and + its variants"; + + leaf enable-ecn { + type boolean; + default false; + description + "When set to true, the device should mark packets that are + ECN-capable rather than dropping them. The receiver is + expected to echo the congestion signal back to the sender + so that it may adjust its transmission rate accordingly. + When this leaf is false, the device drops packets according + to the RED/WRED probability, or all packets if the + average queue length is above the max threshold."; + } + } + + grouping qos-queue-red-common-state { + description + "Common operational state data applicable to RED and + its variants"; + + } + + grouping qos-queue-wred-config { + description + "Configuration data for WRED-managed queues"; + + // TODO(robjs, aashaikh): Add configuration for weighted RED + // within this grouping. + } + + grouping qos-queue-wred-state { + description + "Operational state data for WRED-managed queues"; + } + + grouping qos-queue-wred-top { + description + "Top-level grouping for WRED-managed queues"; + + container wred { + description + "Top-level container for WRED data"; + + container config { + description + "Configuration data for WRED"; + + uses qos-queue-wred-config; + } + + container state { + config false; + description + "Operational state data for WRED"; + + uses qos-queue-wred-config; + uses qos-queue-wred-state; + } + } + } + + grouping qos-queue-red-config { + description + "Configuration data for queues managed with RED"; + + leaf minth { + type uint64; + units bytes; + description + "The mininum threshold parameter for a RED-managed queue. + When the average queue length is less than minth, all + packets are admitted to the queue."; + } + + leaf maxth { + type uint64; + units bytes; + description + "The maximum threshold parameter for a RED-managed queue. + When the average queue length exceeds the maxth value, all + packets are dropped (or marked if ECN is enabled)."; + } + } + + grouping qos-queue-red-state { + description + "Operational state data for queues managed with RED"; + } + + grouping qos-queue-red-top { + description + "Top-level grouping for RED queues"; + + container red { + description + "Top-level container for data related to RED-managed + queues"; + + container config { + description + "Configuration data for RED queues"; + + uses qos-queue-red-config; + } + + container state { + config false; + description + "Operational state data for RED queues"; + + uses qos-queue-red-config; + uses qos-queue-red-state; + } + } + } + + + grouping qos-queue-config { + description + "Configuration data for QoS egress queues"; + + leaf name { + type string; + description + "User-defined name of the queue"; + } + + leaf queue-type { + type identityref { + base oc-qos-types:QOS_QUEUE_TYPE; + } + description + "Sets the type of the queue"; + } + } + + grouping qos-queue-state { + description + "Operational state data for egress queues"; + } + + grouping qos-queue-top { + description + "Top-level grouping for queue elements"; + + container queues { + description + "Enclosing container for the list of queues"; + + list queue { + key "name"; + description + "List of defined queues"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the queue name list key."; + } + + container config { + description + "Configuration data for queues"; + + uses qos-queue-config; + } + + container state { + config false; + description + "Operational state data for queues"; + + uses qos-queue-config; + uses qos-queue-state; + } + + uses qos-queue-red-top { + when "../config/queue-type = 'oc-qos-types:RED'" { + description + "RED configuration is valid when the queue-type + is set accordingly."; + } + } + uses qos-queue-wred-top { + when "../config/queue-type = 'oc-qos-types:WRED'" { + description + "WRED configuration is valid when the queue-type + is set accordingly."; + } + } + } + } + } + + grouping qos-scheduler-output-config { + description + "Configuration data for scheduler output operations"; + + leaf output-type { + type enumeration { + enum SCHEDULER { + description + "Scheduler output is a child scheduler, e.g. to + implement hierarchical schedulers."; + } + enum FWD_GROUP { + description + "Scheduler output is a forwarding group, e.g., when + performing ingress scheduling before packets traverse + a fabric to be processed by an egress forwarding + complex."; + } + enum INTERFACE { + description + "Scheduler output is an interface for forwarding."; + } + } + description + "Describes the type of output sink for the scheduler."; + } + + leaf child-scheduler { + // TODO: consider whether both child (output) and parent + // (input) references are needed; consider whether child + // reference should separate in-profile and out-of-profile + type leafref { + // current loc: + // /qos/scheduler-policies/scheduler-policy/schedulers/scheduler/ + // output/config/child-scheduler + path "../../../../../../../scheduler-policies/scheduler-policy/" + + "config/name"; + } + when "../output-type = 'SCHEDULER'" { + description + "The child-scheduler leaf is valid only when + the output type of the scheduler is a child scheduler"; + } + description + "When the scheduler output type is a child scheduler, + this leaf provides a reference to the downstream + scheduler."; + } + + leaf output-fwd-group { + type leafref { + path "../../../../../../../forwarding-groups/forwarding-group" + + "/config/name"; + } + when "../output-type = 'FWD_GROUP'" { + description + "The output-fwd-group leaf is valid only when + the output type of the scheduler is a forwarding group"; + } + description + "When the scheduler output type is a forwarding group, + this leaf provides a reference to the forwarding group."; + } + } + + grouping qos-scheduler-output-state { + description + "Operational state data for scheduler output"; + } + + grouping qos-scheduler-output-top { + description + "Top-level grouping for data related to scheduler output"; + + container output { + description + "Top-level container for scheduler output data"; + + container config { + description + "Configuration data for scheduler output"; + + uses qos-scheduler-output-config; + } + + container state { + config false; + description + "Operational state data for scheduler output"; + + uses qos-scheduler-output-config; + uses qos-scheduler-output-state; + } + } + } + + grouping qos-scheduler-inputs-config { + description + "Configuration data for scheduler input sources"; + + leaf id { + type string; + description + "User-defined identifier for the scheduler input"; + } + + leaf input-type { + type enumeration { + enum QUEUE { + description + "Input is a defined queue."; + } + enum IN_PROFILE { + description + "Input is in-profile traffic from a parent scheduler/ + shaper"; + } + enum OUT_PROFILE { + description + "Input is out-of-profile traffic from a parent + scheduler/shaper"; + } + } + description + "Describes the type of input source for the scheduler"; + } + + leaf queue { + type leafref { + // current loc: /qos/scheduler-policies/scheduler-policy/schedulers/ + // scheduler/inputs/input/config/queue + path "../../../../../../../../queues/queue/name"; + } + when "../input-type = 'QUEUE'" { + description + "The queue leaf is valid only when + the input type of the scheduler is a queue"; + } + description + "Reference to a queue that is an input source for the + scheduler"; + } + + leaf weight { + type uint64; + description + "For priority schedulers, this indicates the priority of + the corresponding input. Higher values indicate higher + priority. For weighted round-robin schedulers, this leaf + indicates the weight of the corresponding input."; + } + } + + grouping qos-scheduler-inputs-state { + description + "Operational state data for scheduler input sources"; + } + + grouping qos-scheduler-inputs-top { + description + "Top-level grouping for defining inputs to a scheduler."; + + container inputs { + description + "Enclosing container "; + + list input { + key "id"; + description + "List of input sources for the scheduler."; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to list key"; + } + + container config { + description + "Configuration data for scheduler input sources"; + + uses qos-scheduler-inputs-config; + } + + container state { + config false; + description + "Operational state data for scheduler input sources"; + + uses qos-scheduler-inputs-config; + uses qos-scheduler-inputs-state; + } + } + } + } + + grouping qos-scheduler-1r2c-config { + description + "Configuration data for 1 rate, 2 color scheduler."; + + leaf cir { + type uint64; + units bps; + description + "Committed information rate for the single-rate token + bucket scheduler. This value represents the rate at which + tokens are added to the bucket."; + } + + leaf cir-pct { + type oc-types:percentage; + description + "Committed information rate for the single-rate token + bucket scheduler. This value represents the rate at which + tokens are added to the bucket. It is expressed as a + percentage of the total bandwidth allocated to the + context in which the scheduler is referenced."; + } + + leaf cir-pct-remaining { + type oc-types:percentage; + description + "Committed information rate for the single-rate token + bucket scheduler. This value represents the rate at which + tokens are added to the bucket. It is expressed as a + percentage of the unallocated bandwidth available in the + context in which the scheduled is referenced."; + } + + leaf bc { + type uint32; + units bytes; + description + "Committed burst size for the single-rate token bucket + scheduler. This value represents the depth of the token + bucket."; + } + + leaf queuing-behavior { + type oc-qos-types:queue-behavior; + description + "The type of scheduler that is being configured."; + } + + // TODO(robjs): Add when statements to these parameters when the + // types of scheduler are agreed through review. + leaf max-queue-depth-bytes { + type uint32; + units bytes; + description + "When the scheduler is specified to be a shaper - the + maximum depth of the queue in bytes is the value + specified by this leaf."; + } + + leaf max-queue-depth-packets { + type uint32; + units packets; + description + "When the scheduler is specified to be a shaper - the + maximum depth of the queue in packets is the value + specified by this leaf."; + } + + leaf max-queue-depth-percent { + type oc-types:percentage; + description + "The queue depth specified as a percentage of the total + available buffer that is avaialble."; + } + } + + grouping qos-scheduler-1r2c-top { + description + "Top-level grouping for 1 rate, 2 color shapers"; + + container one-rate-two-color { + description + "Top-level container for data related to a 1 rate, 2 color + shaper."; + + container config { + description + "Configuration data for 1 rate, 2 color shapers"; + + uses qos-scheduler-1r2c-config; + } + + container state { + config false; + description + "Operational state data for 1 rate, 2 color shapers"; + + uses qos-scheduler-1r2c-config; + } + + container conform-action { + description + "Action to be applied to packets that are scheduled within the + CIR of the one-rate, two-colour scheduler. Packets that receive + a token from the in-CIR bucket are said to be conforming and + have all of the specified actions applied."; + + container config { + description + "Configuration parameters relating to conforming packets for the + 1r2c scheduler."; + + uses qos-common-remark-actions-config; + } + + container state { + config false; + description + "Operational state parameters relating to conforming packets + for the 1r2c scheduler."; + + uses qos-common-remark-actions-config; + } + } + + container exceed-action { + description + "Action to be applied to packets that are scheduled above the CIR + of the one-rate, two-colour shaper. Packets that do not receive a + token from the in-CIR bucket are said to be exceeding, and have + all of the specified actions applied."; + + container config { + description + "Configuration parameters relating to exceeding packets for + the 1r2c scheduler."; + + uses qos-common-remark-actions-config; + uses qos-common-scheduler-actions-config; + } + + container state { + config false; + description + "Operational state parameters relating to exceeding + packets for the 1r2c scheduler."; + + uses qos-common-remark-actions-config; + uses qos-common-scheduler-actions-config; + } + } + } + } + + grouping qos-scheduler-2r3c-config { + description + "Configuration data for 2 rate, 3 color policer"; + + leaf cir { + type uint64; + units bps; + description + "Committed information rate for the dual-rate token + bucket policer. This value represents the rate at which + tokens are added to the primary bucket."; + } + + leaf cir-pct { + type oc-types:percentage; + description + "Committed information rate for the dual-rate token bucket + policer. This value represents the rate at which tokens + are added to the primary bucket. It is expressed as a + percentage of the total bandwidth available within the + context the scheduler is instantiated."; + } + + leaf cir-pct-remaining { + type oc-types:percentage; + description + "Committed information rate for the dual-rate token + bucket policer. This value represents the rate at which + tokens are added to the primary bucket. It is expressed + as a percentage of the remaining bandwidth within the + context the scheduler is instantiated."; + } + + leaf pir { + type uint64; + units bps; + description + "Peak information rate for the dual-rate token bucket + policer. This value represents the rate at which tokens + are added to the secondary bucket."; + } + + leaf pir-pct { + type oc-types:percentage; + description + "Peak information rate for the dual-rate token bucket + policer. This value represents the rate at which tokens + are added to the secondary bucket. The value is expressed + as a percentage of the total bandwidth available in the + context in which the scheduler is instantiated."; + } + + leaf pir-pct-remaining { + type oc-types:percentage; + description + "Peak information rate for the dual-rate token + bucket policer. This value represents the rate at which + tokens are added to the secondary bucket. It is expressed + as a percentage of the remaining bandwidth within the + context the scheduler is instantiated."; + } + + leaf bc { + type uint32; + units bytes; + description + "Committed burst size for the dual-rate token bucket + policer. This value represents the depth of the token + bucket."; + } + + leaf be { + type uint32; + units bytes; + description + "Excess burst size for the dual-rate token bucket policer. + This value represents the depth of the secondary bucket."; + } + } + + grouping qos-scheduler-2r3c-top { + description + "Top-level grouping for 2 rate, 3 color policers.."; + + container two-rate-three-color { + description + "Top-level container for data for a 2 rate, 3 color policer."; + + container config { + description + "Configuration data for 2 rate, 3 color policers."; + + uses qos-scheduler-2r3c-config; + } + + container state { + config false; + description + "Operational state data for 2 rate, 3 color policers."; + + uses qos-scheduler-2r3c-config; + } + + container conform-action { + description + "Action to be applied to the packets that are scheduled + within the CIR of the policer. All packets that receive + a token from this bucket have all actions specified + applied to them"; + + container config { + description + "Configuration parameters for the conform action of a + 2r3c policer."; + uses qos-common-remark-actions-config; + } + + container state { + config false; + description + "Operational state parameters relating to the conform + action of a 2r3c policer."; + uses qos-common-remark-actions-config; + } + } + + container exceed-action { + description + "Action to be applied to the packets that are scheduled + within the PIR of the policer. Packets that receive a + token from within the PIR allocation have all the + specified actions applied to them"; + + container config { + description + "Configuration parameters relating to the action + applied to exceeding packets."; + + uses qos-common-remark-actions-config; + uses qos-common-scheduler-actions-config; + } + + container state { + config false; + description + "Operational state parameters relating to the action + applied to exceeding packets."; + + uses qos-common-remark-actions-config; + uses qos-common-scheduler-actions-config; + } + } + + container violate-action { + description + "Action to be applied to the packets that are scheduled + above the PIR of the policer. Packets that do not receive + a token from either bucket have all specified actions + applied to them."; + + container config { + description + "Configuration parameters relating to the action + applied to violating packets."; + + uses qos-common-remark-actions-config; + uses qos-common-scheduler-actions-config; + } + + container state { + config false; + description + "Operational state parameters relating to the action + applied to violating packets."; + + uses qos-common-remark-actions-config; + uses qos-common-scheduler-actions-config; + } + } + } + } + + grouping qos-scheduler-config { + description + "Configuration data for QoS schedulers"; + + leaf sequence { + type uint32; + description + "Sequence number for the scheduler within the scheduler + policy. Schedulers are processed from lowest sequence + to highest."; + } + + leaf type { + type identityref { + base oc-qos-types:QOS_SCHEDULER_TYPE; + } + description + "Sets the type of scheduler, i.e. the scheduling algorithm + used to serve inputs."; + } + + leaf priority { + type enumeration { + enum STRICT { + description + "This scheduler term is considered as a strict priority + term - such that packets that arrive in the queue are + immediately serviced."; + } + } + description + "Priority of the scheduler within the scheduler policy."; + } + } + + grouping qos-scheduler-state { + description + "Operational state data for QoS schedulers"; + } + + grouping qos-scheduler-policy-config { + description + "Configuration parameters relating to a scheduler policy"; + + leaf name { + type string; + description + "Name for the scheduler policy."; + } + } + + grouping qos-scheduler-top { + description + "Top-level grouping for the set of defined QoS schedulers"; + + container scheduler-policies { + description + "Enclosing container for the list of configured scheduler policies."; + + list scheduler-policy { + key "name"; + + description + "List of scheduler policies. A scheduler policy is a set of schedulers + that are to be applied together. Each scheduler within a scheduler + policy takes an input, and outputs it according to a scheduling + discipline that is specified within it. The schedulers consume + resources according to the specification that is provided - which + may be absolute resource limits, or relative."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the name of the scheduler policy"; + } + + container config { + description + "Configuration parameters relating to a scheduler policy."; + uses qos-scheduler-policy-config; + } + + container state { + config false; + description + "Operational state parameters relating to a scheduler policy."; + uses qos-scheduler-policy-config; + } + + container schedulers { + description + "Schedulers within the scheduler policy."; + + list scheduler { + key "sequence"; + description + "List of defined QoS traffic schedulers."; + + leaf sequence { + type leafref { + path "../config/sequence"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for QoS schedulers"; + + uses qos-scheduler-config; + } + + container state { + config false; + + description + "Operational state data for QoS schedulers"; + + uses qos-scheduler-config; + uses qos-scheduler-state; + } + + uses qos-scheduler-inputs-top; + uses qos-scheduler-output-top; + uses qos-scheduler-1r2c-top; + uses qos-scheduler-2r3c-top; + } + } + } + } + } + + grouping qos-common-remark-actions { + description + "Common grouping specifying actions related to re-marking + packets"; + + container config { + description + "Configuration parameters relating to remarking packets."; + uses qos-common-remark-actions-config; + } + + container state { + config false; + description + "Operational state parameters relating to remarking packets."; + uses qos-common-remark-actions-config; + } + } + + grouping qos-common-scheduler-actions-config { + description + "Configuration data for common actions of a QoS scheduler."; + + leaf drop { + type boolean; + description + "If set to true, packets within this context are dropped."; + } + } + + grouping qos-common-remark-actions-config { + description + "Configuration data for QoS re-marking actions"; + + leaf set-dscp { + type uint8; + description + "Sets the 6-bit DSCP (differentiated services code point) + value in the IP packet header."; + reference + "RFC 2474 - Definition of the Differentiated Services Field + (DS Field) in the IPv4 and IPv6 Headers"; + } + + leaf set-dot1p { + type uint8; + description + "Sets the 3-bit class-of-service value in the + Ethernet packet header for 802.1Q VLAN-tagged packets, + also known as PCP (priority code point)."; + reference + "IEEE 802.1Q-2014 - IEEE Standard for Local and metropolitan + area networks--Bridges and Bridged Networks"; + } + + leaf set-mpls-tc { + type uint8; + description + "Sets the 3-bit traffic class value (also referred to as EXP + or CoS) in MPLS packets."; + reference + "RFC 3270 - Multi-Protocol Label Switching (MPLS) Support of + Differentiated Services"; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-qos-interfaces.yang b/src/plugins/yang/openconfig/openconfig-qos-interfaces.yang new file mode 100644 index 0000000..ae356a9 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-qos-interfaces.yang @@ -0,0 +1,660 @@ +submodule openconfig-qos-interfaces { + + belongs-to openconfig-qos { + prefix "oc-qos"; + } + + // import openconfig-qos-elements { prefix oc-qos; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-yang-types { prefix oc-yang; } + + include openconfig-qos-elements; + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This submodule defines data related to quality-of-service + configuration and operational state associated with + interfaces."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2016-12-16" { + description + "Fix incorrect interface-ref placement"; + reference "0.2.0"; + } + + revision "2016-06-03" { + description + "Initial revision"; + reference "0.1.0"; + } + + grouping qos-interface-classifier-match-config { + description + "Configuration data for match terms in the classifier + associated with an interface"; + + leaf id { + type leafref { + // Current location: + // /qos/interfaces/interface/input/classifers/classifier/ + // terms/term/config/id + path "../../../../../../../../../classifiers/" + + "classifier[name=current()/../../../../config/name]/" + + "terms/term/config/id"; + + } + description + "Reference to match terms in the classifier"; + } + } + + grouping qos-interface-classifier-match-state { + description + "Operational state data for match terms in the classifier + associated with an interface"; + + leaf matched-packets { + type oc-yang:counter64; + description + "Count of the number of packets matching this classifier + match term on the interface."; + } + + leaf matched-octets { + type oc-yang:counter64; + description + "Count of the number of octets (bytes) matching this + classifier match term on the interface."; + } + + } + + grouping qos-interface-classifier-match-top { + description + "Top-level grouping for match terms in the classifier + associated with an interface"; + + container terms { + description + "Enclosing container for the list of match terms in the + classifier"; + + list term { + key "id"; + description + "List of match terms in the classifier associated with the + interface"; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to match term id list key"; + } + + container config { + description + "Configuration data for match terms in the classifier + associated with an interface"; + + uses qos-interface-classifier-match-config; + } + + container state { + config false; + description + "Operational state data for match terms in the classifier + associated with an interface"; + + uses qos-interface-classifier-match-config; + uses qos-interface-classifier-match-state; + } + } + } + } + + grouping qos-interface-classifier-top { + description + "Top-level grouping for a QoS classifier associated with an + interface"; + + container classifers { + description + "Classifiers to be applied to the interface."; + + list classifier { + key "type"; + + description + "A list of classifiers that should be applied to the interface"; + + leaf type { + type leafref { + path "../config/type"; + } + description + "Reference to the classifier name."; + } + + container config { + description + "Configuration parameters for the list of classifiers."; + uses qos-interface-classifers-config; + } + + container state { + config false; + description + "Operational state parameters for the list of classifiers."; + uses qos-interface-classifers-config; + } + + uses qos-interface-classifier-match-top; + } + } + } + + grouping qos-interface-classifers-config { + description + "Configuration parameters for the list of classifiers"; + + leaf name { + type leafref { + // current loc: /qos/interfaces/interface/input/classifiers/ + // classifier/config/name + path "../../../../../../../classifiers/classifier/config/name"; + } + description + "Reference to the classifier to be applied to ingress traffic on + the interface"; + } + + leaf type { + type enumeration { + enum IPV4 { + description + "Classifier matches IPv4 packets."; + value 4; + } + enum IPV6 { + description + "Classifier matches IPv6 packets."; + value 6; + } + enum MPLS { + description + "Classifier matches MPLS packets."; + } + } + description + "Type of packets matched by the classifier."; + } + } + + grouping qos-interface-queue-config { + description + "Configuration data for the queue associated with the + interface"; + + leaf name { + // TODO(robjs): Previously we proposed that the queue name here is + // only a queue that has been configured. However, in some cases we + // may want to have queues that have not been configured exist. + //type leafref { + // path "../../../../../../queues/queue/config/name"; + //} + type string; + description + "Reference to the queue associated with this interface. + A queue may be explicitly configured, or implicitly created + by the system based on default queues that are instantiated + by a hardware component, or are assumed to be default on + the system."; + } + } + + grouping qos-interface-queue-state { + description + "Operational state data for the queue associated with the + interface"; + + leaf max-queue-len { + type oc-yang:counter64; + units bytes; + description + "Maximum observed queue length"; + } + + leaf avg-queue-len { + type oc-yang:counter64; + units bytes; + description + "Average observed queue length"; + + } + + leaf transmit-pkts { + type oc-yang:counter64; + description + "Number of packets transmitted by this queue"; + } + + leaf transmit-octets { + type oc-yang:counter64; + description + "Number of octets trasmitted by this queue"; + } + + leaf dropped-pkts { + type oc-yang:counter64; + description + "Number of packets dropped by the queue due to overrun"; + } + } + + grouping qos-interface-queue-top { + description + "Top-level grouping for the queue associated with the + interface"; + + container queues { + description + "Surrounding container for a list of queues that are + instantiated on an interface."; + + list queue { + key "name"; + + description + "Top-level container for the queue associated with this + interface"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the name of the queue + instantiated on the interface."; + } + + container config { + description + "Configuration data for the queue associated with the + interface"; + + uses qos-interface-queue-config; + } + + container state { + config false; + description + "Operational state data for the queue associated with the + interface"; + + uses qos-interface-queue-config; + uses qos-interface-queue-state; + } + } + } + } + + grouping qos-interface-voqs-top { + description + "Structural grouping of virtual-output-queue operational state + for an interface."; + + container virtual-output-queues { + description + "Surrounding container for the list of egress interfaces + for which virtual output queues are instantiated on this + interface."; + + list voq-interface { + key "name"; + + description + "List of egress interfaces for which a virtual output + queue is instantiated at this interface."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Name used to refer to the egress interface."; + } + + container config { + description + "Configuration parameters relating to the interface + for which the VOQs are instantiated."; + uses qos-voqs-config; + } + + container state { + config false; + description + "Operational state parameters relating to the interface + for which the VOQs are instantiated."; + uses qos-voqs-config; + } + + uses qos-interface-queue-top; + } + } + } + + grouping qos-voqs-config { + description + "Configuration parameters relating to an egress interface for which + VOQs are established on an interface."; + + leaf name { + type string; + description + "Name used to refer to the egress interface."; + } + } + + grouping qos-interface-scheduler-policy-config { + description + "Configuration data for schedulers associated with + the interface"; + + leaf name { + type leafref { + // current loc: + // /qos/interfaces/interface/input/schedulers/scheduler/config/name + path "../../../../../../scheduler-policies/scheduler-policy/" + + "config/name"; + } + description + "The scheduler policy to be applied to traffic on this interface."; + } + } + + grouping qos-interface-scheduler-state { + description + "Operational state data for a scheduler within + a scheduler group applied to an interface."; + + leaf sequence { + type leafref { + // current loc: /qos/interfaces/interface/input/scheduler-policy/ + // schedulers/scheduler/state/sequence + path "../../../../../../../../scheduler-policies/" + + "scheduler-policy[name=current()/../../../../config/name]" + + "/schedulers/scheduler/config/sequence"; + } + description + "Reference to the sequence ID of the scheduler within + the current scheduler policy."; + } + + uses qos-scheduler-common-state; + } + + grouping qos-scheduler-common-state { + description + "Common definitions of counters used in schedulers."; + + leaf conforming-pkts { + type oc-yang:counter64; + description + "The number of packets that were considered conforming by + the scheduler."; + } + + leaf conforming-octets { + type oc-yang:counter64; + description + "The number of octets in packets that were considered + conforming by the scheduler."; + } + + leaf exceeding-pkts { + type oc-yang:counter64; + description + "The number of packets that were considered exceeding by + the scheduler."; + } + + leaf exceeding-octets { + type oc-yang:counter64; + description + "The number of octets in packets that were considered + exceeding by the scheduler."; + } + + leaf violating-pkts { + type oc-yang:counter64; + description + "The number of packets that were considered violating by + the policer."; + } + + leaf violating-octets { + type oc-yang:counter64; + description + "The number of octets in packets that were considered + violating by the policer."; + } + } + + grouping qos-interface-scheduler-top { + description + "Top-level grouping "; + + container scheduler-policy { + description + "Scheduler policy associated with the interface."; + + container config { + description + "Configuration parameters relating to a scheduler policy on + an interface."; + uses qos-interface-scheduler-policy-config; + } + + container state { + config false; + description + "Operational state parameters relating to a scheduler policy + on an interface."; + uses qos-interface-scheduler-policy-config; + } + + container schedulers { + config false; + description + "Schedulers within the applied scheduler-policy."; + + list scheduler { + key "sequence"; + description + "List of the schedulers that are part of the scheduler-policy + specified."; + + leaf sequence { + type leafref { + path "../state/sequence"; + } + description + "Reference to the sequence ID for the scheduler."; + } + + container state { + description + "Operational state parameters relating to the scheduler + policy."; + + uses qos-interface-scheduler-state; + } + } + } + } + } + + grouping qos-interfaces-config { + description + "Configuration data for interfaces referenced in the QoS + model"; + + leaf interface-id { + type string; + description + "Identifier for the interface."; + } + } + + grouping qos-interfaces-state { + description + "Operational state data for interfaces referenced in the QoS + model"; + + // definitions per-interface counters for QoS + } + + grouping qos-interface-input-config { + description + "Configuration data for QoS on ingress interface"; + } + + grouping qos-interface-input-state { + description + "Operational state data for QoS on ingress interface"; + } + + grouping qos-interface-input-top { + description + "Top-level grouping for QoS on ingress interface"; + + container input { + description + "Top-level container for QoS data for the ingress + interface"; + + container config { + description + "Configuration data for QoS on ingress interface"; + + uses qos-interface-input-config; + } + + container state { + config false; + description + "Operational state data for QoS on ingress interface"; + + uses qos-interface-input-config; + uses qos-interface-input-state; + } + + uses qos-interface-classifier-top; + uses qos-interface-queue-top; + uses qos-interface-scheduler-top; + uses qos-interface-voqs-top; + } + } + + grouping qos-interface-output-config { + description + "Configuration data for QoS on the egress interface"; + } + + grouping qos-interface-output-state { + description + "Operational state data for QoS on the egress interface"; + } + + grouping qos-interface-output-top { + description + "Top-level grouping for QoS on the egress interface"; + + container output { + description + "Top-level container for QoS data related to the egress + interface"; + + container config { + description + "Configuration data for QoS on the egress interface"; + + uses qos-interface-output-config; + } + + container state { + config false; + description + "Operational state data for QoS on the egress interface"; + + uses qos-interface-output-config; + uses qos-interface-output-state; + } + + uses oc-if:interface-ref; + uses qos-interface-classifier-top; + uses qos-interface-queue-top; + uses qos-interface-scheduler-top; + } + } + + grouping qos-interfaces-top { + description + "Top-level grouping for interfaces referenced in the QoS + model"; + + container interfaces { + description + "Enclosing container for the list of interface references"; + + list interface { + key "interface-id"; + description + "List of interfaces referenced by QoS entities."; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "Reference to the interface-id list key"; + } + + container config { + description + "Configuration data "; + + uses qos-interfaces-config; + } + + container state { + config false; + description + "Operational state data "; + + uses qos-interfaces-config; + uses qos-interfaces-state; + } + + uses oc-if:interface-ref; + uses qos-interface-input-top; + uses qos-interface-output-top; + + } + } + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-qos-types.yang b/src/plugins/yang/openconfig/openconfig-qos-types.yang new file mode 100644 index 0000000..291c557 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-qos-types.yang @@ -0,0 +1,148 @@ +module openconfig-qos-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/qos-types"; + + prefix "oc-qos-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types and identities used in OpenConfig + models related to quality-of-service (QoS)"; + + oc-ext:openconfig-version "0.2.0"; + + revision "2016-12-16" { + description + "Fix incorrect interface-ref placement"; + reference "0.2.0"; + } + + revision "2016-08-08" { + description + "Initial revision"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + identity QOS_QUEUE_TYPE { + description + "Base identity for supported queue types, primarily + defined by their drop behavior / strategy"; + } + + identity DROP_TAIL { + base QOS_QUEUE_TYPE; + description + "When the queue is filled to capacity, newly arriving packets + are discarded until there is room in the queue to accept new + traffic. Packets are not differentiated, i.e., all packets + are treated identically."; + } + + identity RED { + base QOS_QUEUE_TYPE; + description + "Queue management based on Random Early Detection (RED). RED + drops packets based on a drop probability that is based on the + average queue length, and settings of mininum and maximum + queue thresholds. On ECN-capable devices, packets may be + marked instead of dropped to signal congestion to the + sender."; + reference + "IETF RFC 2309 - Recommendations on Queue Management and + Congestion Avoidance in the Internet + IETF RFC 7567 - IETF Recommendations Regarding Active Queue + Management"; + } + + identity WRED { + base QOS_QUEUE_TYPE; + description + "Queue management based on a variant of RED in which the packet + drop probability is based on its traffic class."; + } + + identity QOS_SCHEDULER_TYPE { + description + "Base identity to describe supported QoS scheduler types."; + } + + identity ONE_RATE_TWO_COLOR { + base QOS_SCHEDULER_TYPE; + description + "Token bucket scheduler with a single rate (committed information + rate) and two colors (conforming and exceeding). The scheduler + behavior is governed by two parameters, the CIR which + determines the rate of token fill (bps) and the committed + burst size (depth of the token bucket in bytes)."; + } + + identity TWO_RATE_THREE_COLOR { + base QOS_SCHEDULER_TYPE; + description + "Token bucket scheduler with two buckets, one filled at the + committed information rate (CIR) in bps, and the second filled + at the peak information rate (PIR) in bps when the first + bucket is full. The first bucket depth is + the committed burst size (bytes), and the second is the + excess burst size (bytes). Traffic is categorized in three + colors as follows: traffic that falls within the + the CIR is conforming, traffic that is greater than the CIR + but less than the PIR is exceeding, and traffic that is + greater than PIR is violating."; + } + + // typedef statements + + typedef queue-behavior { + type enumeration { + enum SHAPE { + description + "Packets that exceed the CIR should be queued into a + buffer. The depth of the buffer is specified to be + max-queue-depth-bytes or max-queue-depth-packets. + Packets are subsequently scheduled from this queue + to the specified output. Only packets that overflow + the buffer have the exceed action applied to them."; + } + enum POLICE { + description + "Packets that exceed the CIR should be immediately + treated as exceeding the defined rate of the scheduler + and have the exceed action applied to them."; + } + } + description + "Type definition for different queueing behaviours that + are available to a scheduler."; + } + + // grouping statements + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-qos.yang b/src/plugins/yang/openconfig/openconfig-qos.yang new file mode 100644 index 0000000..7bda3ae --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-qos.yang @@ -0,0 +1,90 @@ +module openconfig-qos { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/qos"; + + prefix "oc-qos"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + // include submodules + include openconfig-qos-interfaces; + include openconfig-qos-elements; + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + related to network quality-of-service."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2016-12-16" { + description + "Fix incorrect interface-ref placement"; + reference "0.2.0"; + } + + // grouping statements + grouping qos-config { + description + "Configuration data for global QoS"; + } + + grouping qos-state { + description + "Operational state data for global QoS"; + } + + grouping qos-top { + description + "Top-level grouping for QoS model"; + + container qos { + description + "Top-level container for QoS data"; + + container config { + description + "Configuration data for global QoS"; + + uses qos-config; + } + + container state { + config false; + description + "Operational state data for global QoS"; + + uses qos-config; + uses qos-state; + } + + uses qos-interfaces-top; + uses qos-classifier-top; + uses qos-forwarding-group-top; + uses qos-queue-top; + uses qos-scheduler-top; + } + } + + // data definition statements + + uses qos-top; + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-relay-agent.yang b/src/plugins/yang/openconfig/openconfig-relay-agent.yang new file mode 100644 index 0000000..c0a2637 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-relay-agent.yang @@ -0,0 +1,815 @@ +module openconfig-relay-agent { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/relay-agent"; + + prefix "oc-relay"; + + // import some basic types + import ietf-inet-types { prefix inet; } + import ietf-yang-types { prefix yang; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module describes a model for configuration and operational + state related to relay agents typically used for DHCP and BOOTP + packets. The supports both DHCP and DHCPv6 and device-wide and + per-interface settings."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2016-05-16" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // grouping statements + + grouping agent-information-ipv4-common-config { + description + "Common configuration data for DHCP relay option"; + + leaf enable { + type boolean; + default false; + description + "Enable sending the DHCP option for Relay Agent information + -- option 82."; + reference + "RFC 3046 - DHCP Relay Agent Information Option"; + } + } + + grouping agent-information-ipv4-common-state { + description + "Common operational state data for DHCP relay option"; + + } + + grouping agent-information-ipv4-global-top { + description + "Top-level grouping for agent information data at global level"; + + container agent-information-option { + description + "Top-level container for relay agent information option + data"; + + container config { + description + "Configuration data for the relay agent information + option"; + + uses agent-information-ipv4-common-config; + } + + container state { + + config false; + + description + "Operational state data for agent information at global + level"; + + uses agent-information-ipv4-common-config; + uses agent-information-ipv4-common-state; + } + } + } + + grouping agent-information-ipv4-interface-config { + description + "Configuration data for DCHP relay option on interfaces"; + + leaf circuit-id { + type string; + description + "Encodes an agent-local identifier of the circuit from which + a DHCP client-to-server packet was received. It is intended + for use by agents in relaying DHCP responses back to the + proper circuit. The circuit id is an opaque value"; + reference + "RFC 3046 - DHCP Relay Agent Information Option"; + } + + leaf remote-id { + type string; + description + "Provides a mechanism to identify the remote host end of + the circuit. The remote-id should be thought of as an + opaque value, but must be globally unique."; + reference + "RFC 3046 - DHCP Relay Agent Information Option"; + } + } + + grouping agent-information-ipv4-interface-state { + description + "Operational state data for DHCP relay option on interfaces"; + + leaf sent-circuit-id { + type string; + description + "Reports the circuit-id sent by the system to the DHCP + server."; + } + + leaf sent-remote-id { + type string; + description + "Reports the remote-id value sent by the system to the DHCP + server"; + } + } + + grouping agent-information-ipv4-interface-top { + description + "Top-level grouping for relay agent information option data"; + + container agent-information-option { + description + "Top-level container for relay agent information option + data"; + + container config { + description + "Configuration data for the relay agent information + option"; + + uses agent-information-ipv4-common-config; + uses agent-information-ipv4-interface-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses agent-information-ipv4-common-config; + uses agent-information-ipv4-interface-config; + uses agent-information-ipv4-common-state; + uses agent-information-ipv4-interface-state; + } + } + } + + grouping agent-options-ipv6-common-config { + description + "Configuration data for DHCPv6 options"; + + leaf enable-interface-id { + type boolean; + default false; + description + "Enables DHCPv6 OPTION_INTERFACE_ID (18) to identify the + interface on which the client message was received."; + reference + "IETF RFC 3315 - Dynamic Host Configuration Protocol for + IPv6 (DHCPv6)"; + } + + leaf enable-remote-id { + type boolean; + default false; + description + "Sets DHCPv6 OPTION_REMOTE_ID (37). This option is the + DHCPv6 equivalent for the IPv4 (DHCPv4) Relay Agent Option's + Remote-ID suboption as specified in RFC 3046. The remote-id + field may be used to encode a user name, remote IP address, + interface/port identifier, etc."; + reference + "IETF RFC 4649 - Dynamic Host Configuration Protocol for + IPv6 (DHCPv6) Relay Agent Remote-ID Option"; + } + } + + grouping agent-options-ipv6-common-state { + description + "Operational state data for DHCPv6 options"; + } + + grouping agent-options-ipv6-interface-config { + description + "Configuration data for DHCPv6 options"; + + leaf interface-id { + type string; + description + "Sets DHCPv6 OPTION_INTERFACE_ID (18) to identify the + interface on which the client message was received."; + reference + "IETF RFC 3315 - Dynamic Host Configuration Protocol for + IPv6 (DHCPv6)"; + } + + leaf remote-id { + type string; + description + "Sets DHCPv6 OPTION_REMOTE_ID (37). This option is the + DHCPv6 equivalent for the IPv4 (DHCPv4) Relay Agent Option's + Remote-ID suboption as specified in RFC 3046. The remote-id + field may be used to encode a user name, remote IP address, + interface/port identifier, etc."; + reference + "IETF RFC 4649 - Dynamic Host Configuration Protocol for + IPv6 (DHCPv6) Relay Agent Remote-ID Option"; + } + } + + grouping agent-options-ipv6-interface-state { + description + "Operational state data for DHCPv6 options"; + + leaf sent-interface-id { + type string; + description + "Reflects the DHCPv6 OPTION_INTERFACE_ID (18) sent to the + server by the system."; + reference + "IETF RFC 3315 - Dynamic Host Configuration Protocol for + IPv6 (DHCPv6)"; + } + + leaf sent-remote-id { + type string; + description + "Reflects the DHCPv6 OPTION_REMOTE_ID (37) sent to the + server by the system."; + reference + "IETF RFC 4649 - Dynamic Host Configuration Protocol for + IPv6 (DHCPv6) Relay Agent Remote-ID Option"; + } + } + + grouping agent-options-ipv6-global-top { + description + "Top-level grouping for DHCPv6 options on interfaces"; + + container options { + description + "Top-level container for DHCPv6 agent options on interfaces"; + + container config { + description + "Configuration data "; + + uses agent-options-ipv6-common-config; + } + + container state { + + config false; + + description + "Operational state data for DHCPv6 agent option on an + interface"; + + uses agent-options-ipv6-common-config; + uses agent-options-ipv6-common-state; + } + } + } + + grouping agent-options-ipv6-interface-top { + description + "Top-level grouping for DHCPv6 options on interfaces"; + + container options { + description + "Top-level container for DHCPv6 agent options on interfaces"; + + container config { + description + "Configuration data "; + + uses agent-options-ipv6-common-config; + uses agent-options-ipv6-interface-config; + } + + container state { + + config false; + + description + "Operational state data for DHCPv6 agent option on an + interface"; + + uses agent-options-ipv6-common-config; + uses agent-options-ipv6-interface-config; + uses agent-options-ipv6-common-state; + uses agent-options-ipv6-interface-state; + } + } + } + + grouping relay-agent-common-config { + description + "Configuration data for global level relay agent options, + common across address families"; + + leaf enable-relay-agent { + type boolean; + default false; + description + "Enables DHCP/BOOTP relay agent on all interfaces"; + } + } + + grouping relay-agent-common-state { + description + "Operational state data for global level relay agent, common + across address families"; + } + + grouping relay-agent-ipv4-config { + description + "Configuration data for DHCPv4 relay agents"; + + uses relay-agent-common-config; + } + + grouping relay-agent-ipv4-state { + description + "Configuration data for DHCPv4 relay agents"; + + uses relay-agent-common-state; + } + + + grouping relay-agent-ipv4-top { + description + "Top-level grouping for global relay agent data"; + + container dhcp { + description + "Top-level container for global relay agent data"; + + container config { + description + "Configuration data for global DHCPv4"; + + uses relay-agent-ipv4-config; + } + + container state { + + config false; + + description + "Operational state data global DHCPv4"; + + uses relay-agent-ipv4-config; + uses relay-agent-ipv4-state; + } + + uses agent-information-ipv4-global-top; + uses relay-agent-ipv4-interfaces-top; + } + } + + grouping relay-agent-ipv6-config { + description + "Configuration data for DHCPv6 relay agents"; + + uses relay-agent-common-config; + } + + grouping relay-agent-ipv6-state { + description + "Configuration data for DHCPv6 relay agents"; + + uses relay-agent-common-state; + } + + grouping relay-agent-ipv6-top { + description + "Top-level grouping for global relay agent data"; + + container dhcpv6 { + description + "Top-level container for global relay agent data"; + + container config { + description + "Configuration data for global DHCPv6"; + + uses relay-agent-ipv6-config; + } + + container state { + + config false; + + description + "Operational state data global DHCPv6"; + + uses relay-agent-ipv6-config; + uses relay-agent-ipv6-state; + } + + uses agent-options-ipv6-global-top; + uses relay-agent-ipv6-interfaces-top; + } + } + + + grouping relay-agent-common-stats { + description + "Common DHCP / BOOTP message statistics for + DHCPv4 and DHCPv6"; + + + leaf total-dropped { + type yang:counter64; + description + "Total number of DHCP packets dropped by the relay agent"; + } + + leaf invalid-opcode { + type yang:counter64; + description + "Number of DHCP packets dropped due to an invalid opcode"; + } + + leaf invalid-options { + type yang:counter64; + description + "Number of DHCP packets dropped due to an invalid option"; + } + } + + grouping relay-agent-ipv4-stats { + description + "DHCPv4 relay agent message statistics"; + + leaf bootrequest-received { + type yang:counter64; + description + "BOOTREQUEST messages received by the relay agent"; + } + + leaf dhcp-decline-received { + type yang:counter64; + description + "DHCP DECLINE messages received by the relay agent"; + } + + leaf dhcp-discover-received { + type yang:counter64; + description + "DHCP DISCOVER messages received by the relay agent"; + } + + leaf dhcp-inform-received { + type yang:counter64; + description + "DHCP INFORM messages received by the relay agent"; + } + + leaf dhcp-release-received { + type yang:counter64; + description + "DHCP RELEASE messages received by the relay agent"; + } + + leaf dhcp-request-received { + type yang:counter64; + description + "DHCP REQUEST messages received by the relay agent"; + } + + leaf bootrequest-sent { + type yang:counter64; + description + "BOOTREQUEST messages forwarded by the relay agent"; + } + + leaf bootreply-sent { + type yang:counter64; + description + "BOOTREPLY messages forwarded by the relay agent"; + } + + leaf dhcp-offer-sent { + type yang:counter64; + description + "DHCP OFFER messages sent by the relay agent"; + } + + leaf dhcp-ack-sent { + type yang:counter64; + description + "DHCP ACK messages sent by the relay agent"; + } + + leaf dhcp-nack-sent { + type yang:counter64; + description + "DHCP NACK messages sent by the relay agent"; + } + } + + grouping relay-agent-ipv6-stats { + description + "DHCPv4 relay agent message statistics"; + + leaf dhcpv6-solicit-received { + type yang:counter64; + description + "Number of DHCPv6 SOLICIT messages received from clients + by the relay agent"; + } + + leaf dhcpv6-decline-received { + type yang:counter64; + description + "Number of DHCPv6 DECLINE messages received from + clients by the relay agent"; + } + + leaf dhcpv6-request-received { + type yang:counter64; + description + "Number of DHCPv6 request messages received from clients + by the relay agent"; + } + + leaf dhcpv6-release-received { + type yang:counter64; + description + "Number of DHCPv6 release messages received from clients + by the relay agent"; + } + + leaf dhcpv6-confirm-received { + type yang:counter64; + description + "Number of DHCPv6 confirm messages received from clients + by the relay agent"; + } + + leaf dhcpv6-rebind-received { + type yang:counter64; + description + "Number of DHCPv6 rebind messages received from clients + by the relay agent"; + } + + leaf dhcpv6-info-request-received { + type yang:counter64; + description + "Number of DHCPv6 information requests messages received from + clients by the relay agent"; + } + + leaf dhcpv6-relay-reply-received { + type yang:counter64; + description + "Number of DHCPv6 relay reply messages received from servers + by the relay agent"; + } + + leaf dhcpv6-adverstise-sent { + type yang:counter64; + description + "Number of DHCPv6 adverstise messages sent to clients by + the relay agent"; + } + + leaf dhcpv6-reply-sent { + type yang:counter64; + description + "Number of DHCPv6 reply messages sent to clients by + the relay agent"; + } + + leaf dhcpv6-reconfigure-sent { + type yang:counter64; + description + "Number of DHCPv6 reconfigure messages sent to clients by + the relay agent"; + } + + leaf dhcpv6-relay-forw-sent { + type yang:counter64; + description + "Number of DHCPv6 relay-forward messages sent to servers + by the relay agent"; + } + + } + + grouping relay-agent-ipv4-interfaces-config { + description + "Configuration data for interfaces enabled for relaying"; + + leaf id { + type oc-if:interface-id; + description + "Name of the interface on which relay agent is active"; + } + + leaf enable { + type boolean; + description + "Enables the relay agent on the referenced interface. + At least one helper address should also be configured + for forwarding requested."; + } + + leaf-list helper-address { + type inet:ip-address; + description + "List of IPv4 or IPv6 addresses of DHCP servers to which the + relay agent should forward DHCPv4 requests. The relay agent is + expected to forward DHCPv4/BOOTP requests to all listed + server addresses when DHCPv4 relaying is enabled globally, or + on the interface."; + } + } + + grouping relay-agent-ipv4-interfaces-state { + description + "Operational state data for interfaces enabled for relaying"; + + container counters { + description + "Counters and statistics for relay agent operation."; + + uses relay-agent-common-stats; + uses relay-agent-ipv4-stats; + } + } + + grouping relay-agent-ipv4-interfaces-top { + description + "Top-level grouping for DHCPv4 relays on interfaces"; + + container interfaces { + description + "Enclosing container for the list of interface references."; + + list interface { + key "id"; + description + "List of interfaces on which the relay agent is + configured."; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to the interface list key"; + } + + container config { + description + "Configuration data for relay agent interfaces."; + + uses relay-agent-ipv4-interfaces-config; + } + + container state { + + config false; + + description + "Operational state data for relay agent interfaces."; + + uses relay-agent-ipv4-interfaces-config; + uses relay-agent-ipv4-interfaces-state; + } + + uses oc-if:interface-ref; + uses agent-information-ipv4-interface-top; + } + } + } + + grouping relay-agent-ipv6-interfaces-config { + description + "Configuration data for interfaces enabled for relaying"; + + leaf id { + type oc-if:interface-id; + description + "Name of the interface on which relay agent is active"; + } + + leaf enable { + type boolean; + description + "Enables the relay agent on the referenced interface. + At least one helper address should also be configured + for forwarding requested."; + } + + leaf-list helper-address { + type inet:ipv6-address; + description + "List of IPv6 addresses of DHCP servers to which the + relay agent should forward DHCPv6 requests. The relay agent + is expected to forward DHCPv4/BOOTP requests to all listed + server addresses when DHCPv6 relaying is enabled globally, or + on the interface."; + } + } + + grouping relay-agent-ipv6-interfaces-state { + description + "Operational state data for interfaces enabled for relaying"; + + container counters { + description + "Counters and statistics for relay agent operation."; + + uses relay-agent-common-stats; + uses relay-agent-ipv6-stats; + } + } + + grouping relay-agent-ipv6-interfaces-top { + description + "Top-level grouping for DHCPv4 relays on interfaces"; + + container interfaces { + description + "Enclosing container for the list of interface references."; + + list interface { + key "id"; + description + "List of interfaces on which the relay agent is + configured."; + + leaf id { + type leafref { + path "../config/id"; + } + description + "Reference to the interface list key"; + } + + container config { + description + "Configuration data for relay agent interfaces."; + + uses relay-agent-ipv6-interfaces-config; + } + + container state { + + config false; + + description + "Operational state data for relay agent interfaces."; + + uses relay-agent-ipv6-interfaces-config; + uses relay-agent-ipv6-interfaces-state; + } + + uses oc-if:interface-ref; + uses agent-options-ipv6-interface-top; + } + } + } + + grouping relay-agent-top { + description + "Top-level container for relay agent configuration and opstate + data."; + + container relay-agent { + description + "Top level container for relay-agent configuration and + operational state data"; + + uses relay-agent-ipv4-top; + uses relay-agent-ipv6-top; + } + } + + // data definition statements + + uses relay-agent-top; + + // augment statements + + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp-attributes.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp-attributes.yang new file mode 100644 index 0000000..0f0512c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp-attributes.yang @@ -0,0 +1,907 @@ +submodule openconfig-rib-bgp-attributes { + + belongs-to openconfig-rib-bgp { + prefix "oc-rib-bgp"; + } + + + // import some basic types + import openconfig-bgp-types { prefix oc-bgpt; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-rib-bgp-types { prefix oc-bgprt; } + import openconfig-segment-routing { prefix oc-sr; } + import openconfig-inet-types { prefix oc-inet; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains common data definitions for BGP + attributes for use in BGP RIB tables."; + + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + + grouping bgp-as-path-attr-state { + description + "Data for representing BGP AS-PATH attribute"; + + leaf type { + type oc-bgpt:as-path-segment-type; + description + "The type of AS-PATH segment"; + } + + leaf-list member { + type oc-inet:as-number; + description + "List of the AS numbers in the AS-PATH segment"; + } + } + + grouping bgp-as-path-attr-top { + description + "Top-level grouping for AS-PATH attribute data"; + + container as-path { + description + "Enclosing container for the list of AS path segments. + + In the Adj-RIB-In or Adj-RIB-Out, this list should show + the received or sent AS_PATH, respectively. For + example, if the local router is not 4-byte capable, this + value should consist of 2-octet ASNs or the AS_TRANS + (AS 23456) values received or sent in route updates. + + In the Loc-RIB, this list should reflect the effective + AS path for the route, e.g., a 4-octet value if the + local router is 4-octet capable."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4) + RFC 6793 - BGP Support for Four-octet AS Number Space + RFC 5065 - Autonomous System Confederations for BGP"; + + list segment { + description + "Unkeyed list of AS PATH segments"; + + container state { + config false; + description + "Opstate data for AS-PATH segments"; + + uses bgp-as-path-attr-state; + } + } + } + } + + grouping bgp-as4-path-attr-top { + description + "Top-level grouping for AS4-PATH attribute data"; + + container as4-path { + description + "This is the path encoded with 4-octet + AS numbers in the optional transitive AS4_PATH attribute. + This value is populated with the received or sent attribute + in Adj-RIB-In or Adj-RIB-Out, respectively. It should not + be populated in Loc-RIB since the Loc-RIB is expected to + store the effective AS-Path in the as-path leaf regardless + of being 4-octet or 2-octet."; + reference + "RFC 6793 - BGP Support for Four-octet AS Number Space"; + + list segment { + description + "Unkeyed list of AS PATH segments"; + + container state { + config false; + description + "Opstate data for AS-PATH segments"; + + uses bgp-as-path-attr-state; + } + } + } + } + + grouping bgp-community-attr-state { + description + "Common definition of BGP community attributes"; + + leaf-list community { + type union { + type oc-bgpt:bgp-well-known-community-type; + type oc-bgpt:bgp-std-community-type; + } + description + "List of standard or well-known BGP community + attributes."; + } + } + + grouping bgp-extended-community-attr-state { + description + "Common definition of BGP extended community attribute"; + + leaf-list ext-community { + type oc-bgpt:bgp-ext-community-recv-type; + description + "List of BGP extended community attributes. The received + extended community may be an explicitly modeled + type or unknown, represented by an 8-octet value + formatted according to RFC 4360."; + reference + "RFC 4360 - BGP Extended Communities Attribute"; + } + + } + + grouping bgp-aggregator-attr-state { + description + "Operational state data for the BGP aggregator + attribute"; + + leaf as { + type oc-inet:as-number; + description + "AS number of the autnonomous system that performed the + aggregation."; + } + + leaf as4 { + type oc-inet:as-number; + description + "AS number of the autnonomous system that performed the + aggregation (4-octet representation). This value is + populated if an upstream router is not 4-octet capable. + Its semantics are similar to the AS4_PATH optional + transitive attribute"; + reference + "RFC 6793 - BGP Support for Four-octet AS Number Space"; + } + + leaf address { + type oc-inet:ipv4-address; + description + "IP address of the router that performed the + aggregation."; + } + } + + + grouping bgp-aggregator-attr-top { + description + "Common definition of the BGP aggregator attribute"; + + container aggregator { + description + "BGP attribute indicating the prefix has been aggregated by + the specified AS and router."; + + container state { + config false; + description + "Operational state data for BGP aggregator attribute"; + + uses bgp-aggregator-attr-state; + } + } + } + + grouping bgp-shared-common-attr-state { + description + "Route attributes shared across route table entries, + common to both LOC-Rib and Adj-RIB"; + + + leaf origin { + type oc-bgpt:bgp-origin-attr-type; + description + "BGP attribute defining the origin of the path information."; + } + + leaf atomic-aggregate { + type boolean; + description + "BGP attribute indicating that the prefix is an atomic + aggregate, i.e., the peer selected a less specific + route without selecting a more specific route that is + included in it."; + } + + leaf next-hop { + type oc-inet:ip-address; + description + "BGP next hop attribute defining the IP address of the router + that should be used as the next hop to the destination"; + } + + leaf med { + type uint32; + description + "BGP multi-exit discriminator attribute used in BGP route + selection process"; + } + + leaf local-pref { + type uint32; + description + "BGP local preference attribute sent to internal peers to + indicate the degree of preference for externally learned + routes. The route with the highest local preference value + is preferred."; + } + + leaf originator-id { + type oc-inet:ipv4-address; + description + "BGP attribute that provides the id as an IPv4 address + of the originator of the announcement."; + reference + "RFC 4456 - BGP Route Reflection: An Alternative to Full + Mesh Internal BGP (IBGP)"; + } + + leaf-list cluster-list { + type oc-inet:ipv4-address; + description + "Represents the reflection path that the route has passed."; + reference + "RFC 4456 - BGP Route Reflection: An Alternative to Full + Mesh Internal BGP (IBGP)"; + } + + leaf aigp { + type uint64; + description + "BGP path attribute representing the accumulated IGP metric + for the path"; + reference + "RFC 7311 - The Accumulated IGP Metric Attribute for BGP"; + } + } + + grouping bgp-unknown-attr-flags-state { + description + "Operational state data for path attribute flags"; + + leaf optional { + type boolean; + description + "Defines whether the attribute is optional (if + set to true) or well-known (if set to false). + Set in the high-order bit of the BGP attribute + flags octet."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + leaf transitive { + type boolean; + description + "Defines whether an optional attribute is transitive + (if set to true) or non-transitive (if set to false). For + well-known attributes, the transitive flag MUST be set to + true. Set in the second high-order bit of the BGP attribute + flags octet."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + leaf partial { + type boolean; + description + "Defines whether the information contained in the optional + transitive attribute is partial (if set to true) or complete + (if set to false). For well-known attributes and for + optional non-transitive attributes, the partial flag + must be set to false. Set in the third high-order bit of + the BGP attribute flags octet."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + leaf extended { + type boolean; + description + "Defines whether the attribute length is one octet + (if set to false) or two octets (if set to true). Set in + the fourth high-order bit of the BGP attribute flags + octet."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + } + + grouping bgp-unknown-attr-state { + description + "Operational state data for path attributes not shared + across route entries, common to LOC-RIB and Adj-RIB"; + + leaf attr-type { + type uint8; + description + "1-octet value encoding the attribute type code"; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + leaf attr-len { + type uint16; + description + "One or two octet attribute length field indicating the + length of the attribute data in octets. If the Extended + Length attribute flag is set, the length field is 2 octets, + otherwise it is 1 octet"; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + + leaf attr-value { + type binary { + length 1..65535; + } + description + "Raw attribute value, not including the attribute + flags, type, or length. The maximum length + of the attribute value data is 2^16-1 per the max value + of the attr-len field (2 octets)."; + reference + "RFC 4271 - A Border Gateway Protocol 4 (BGP-4)"; + } + } + + grouping bgp-unknown-attr-top { + description + "Unknown path attributes that are not expected to be shared + across route entries, common to LOC-RIB and Adj-RIB"; + + container unknown-attributes { + description + "Unknown path attributes that were received in the UPDATE + message which contained the prefix."; + + list unknown-attribute { + key "attr-type"; + description + "This list contains received attributes that are unrecognized + or unsupported by the local router. The list may be empty."; + + leaf attr-type { + type leafref { + path "../state/attr-type"; + } + description + "Reference to the list key"; + } + + container state { + description + "Operational state for unknown route attributes"; + + uses bgp-unknown-attr-flags-state; + uses bgp-unknown-attr-state; + } + } + } + } + + grouping bgp-loc-rib-attr-state { + description + "Path attributes that are not expected to be shared across + route entries, specific to LOC-RIB"; + + } + + grouping bgp-adj-rib-attr-state { + description + "Path attributes that are not expected to be shared across + route entries, specific to Adj-RIB"; + + leaf path-id { + type uint32; + description + "When the BGP speaker supports advertisement of multiple + paths for a prefix, the path identifier is used to + uniquely identify a route based on the combination of the + prefix and path id. In the Adj-RIB-In, the path-id value is + the value received in the update message. In the Loc-RIB, + if used, it should represent a locally generated path-id + value for the corresponding route. In Adj-RIB-Out, it + should be the value sent to a neighbor when add-paths is + used, i.e., the capability has been negotiated."; + reference + "draft-ietf-idr-add-paths - Advertisement of Multiple Paths + in BGP"; + } + } + + grouping bgp-tunnel-encapsulation-attr-top { + description + "Top-level definition of the BGP Tunnel encapsulation + attribute."; + + container tunnel-encapsulation { + config false; + description + "The Tunnel Encapsulation attribute specifies a set of + tunnels to a remote destination. The attribute is TLV + based and allows description of a tunnel type, and the + relevant information to create the tunnel to the remote + destination."; + + reference "RFC5512, draft-ietf-idr-tunnel-encaps"; + + container tunnels { + description + "Surrounding container for the set of tunnels included + within the tunnel encapsulation attribute."; + + list tunnel { + key "type"; + description + "List of the tunnels that are specified within the + attribute. Keyed on the type of tunnel that the + TLV describes."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the tunnel type specified within the + TLV's type field."; + } + + container state { + config false; + description + "State parameters of the tunnel attribute"; + + uses bgp-tunnel-encapsulation-attr-tunnel-state; + } + + container subtlvs { + description + "Surrounding container for the list of sub-TLVs within + the tunnel encapsulation attribute."; + + list subtlv { + key "type"; + description + "List of the subTLVs that are specified within the + TLV instance inside the tunnel encapsulation attribute."; + + leaf type { + type leafref { + path "../state/type"; + } + description + "Reference to the sub-TLV type that is included within + the subTLV."; + } + + container state { + config false; + description + "State parameters of the subTLV of the tunnel attribute"; + + uses bgp-tunnel-encapsulation-attr-tunnel-subtlv-state; + } + + container remote-endpoints { + when "../state/type = 'oc-bgprt:TUNNEL_REMOTE_ENDPOINT'" { + description + "Only allow the remote endpoint to be specified when the + subTLV is specified to describe remote endpoints."; + } + + description + "The remote endpoints associated with the tunnel + described by the attribute."; + + list remote-endpoint { + key "endpoint"; + description + "List of the remote endpoints described within the TLV."; + + leaf endpoint { + type leafref { + path "../state/endpoint"; + } + description + "Reference to the IP address of the endpoint."; + } + + container state { + config false; + description + "State parameters of the remote endpoints described + by the attribute."; + + uses bgp-tunnel-encapsulation-attr-tunnel-subtlv-endpoint-state; + } + } + } + + container segment-lists { + when "../state/type = 'oc-bgprt:SRTE_SEGMENT_LIST'" { + description + "Only allow the segment lists to be specified when the sub-TLV + is of the relevant type."; + } + + description + "Surrounding container for the list of segment lists that are + associated with a SR-TE Policy tunnel."; + + list segment-list { + key "instance-id"; + + description + "List of segment lists that are specified within the + tunnel encapsulation attribute."; + + leaf instance-id { + type leafref { + path "../state/instance-id"; + } + description + "Reference to the instance identifier of the Segment List + that is included within the tunnel encapsulation + attribute."; + } + + container state { + config false; + description + "State parameters relating to the Segment List within the + Tunnel Encapsulation attribute."; + + uses bgp-tunnel-encapsulation-attr-tunnel-subtlv-segment-list-state; + } + + container segments { + description + "Surrounding container for the list of segments within the + SR-TE segment list."; + + list segment { + key "index"; + + description + "List of segments within the SR-TE segment list."; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to the index of the segment within the + segment list."; + } + + container state { + config false; + description + "State parameters relating to the segment within + the segment list."; + + uses bgp-tunnel-encapsulation-attr-tunnel-subtlv-segment-state; + } + } + } + } + } + } + } + } + } + } + } + + grouping bgp-tunnel-encapsulation-attr-tunnel-state { + description + "State parameters of the tunnel encapsulation attribute"; + + leaf type { + type identityref { + base "oc-bgprt:TUNNEL_ENCAPSULATION_TYPE"; + } + description + "Type of the tunnel described within the tunnel encapsulation + attribute."; + } + } + + grouping bgp-tunnel-encapsulation-attr-tunnel-subtlv-state { + description + "State parameters relating to subTLVs of the tunnel encapsulation + attribute."; + + leaf type { + type identityref { + base "oc-bgprt:TUNNEL_ENCAPSULATION_SUBTLV_TYPE"; + } + description + "Type of the sub-TLV within the tunnel encapsulation attribute"; + } + + leaf-list colors { + when "../type = 'oc-bgprt:TUNNEL_COLOR'" { + description + "Only allow list of colours to be specified when the sub-TLV + specifies colours associated with the tunnel encapsulation + attribute."; + } + type uint32; + description + "The colours associated with the tunnel encapsulation attribute, + as described by RFC5512."; + } + + leaf preference { + when "../type = 'oc-bgprt:SRTE_PREFERENCE'" { + description + "Only allow the preference to be specified when the sub-TLV + specifies the preference associated with the tunnel encapsulation + attribute."; + } + type uint32; + default 100; + description + "The preference of the SR-TE policy described by the tunnel + encapsulation attribute. If unspecified, the preference + defaults to 100."; + } + + leaf binding-sid { + when "../type = 'oc-bgprt:SRTE_BINDING_SID'" { + description + "Only allow the binding SID to be specified when the sub-TLV + is specified to be the of the relevant type."; + } + type oc-sr:sr-sid-type; + description + "Binding SID associated with the SR-TE policy"; + } + } + + grouping bgp-tunnel-encapsulation-attr-tunnel-subtlv-endpoint-state { + description + "State parameters relating to the remote endpoint described by a + tunnel encapsulation attribute."; + + leaf as { + type oc-inet:as-number; + description + "The remote AS to which the IP address of the remote endpoint + belongs."; + } + + leaf endpoint { + type oc-inet:ip-address; + description + "IP address of the remote endpoint."; + } + } + + grouping bgp-tunnel-encapsulation-attr-tunnel-subtlv-segment-list-state { + description + "State parameters relating to an entry within a segment list within + a SR-TE policy segment list."; + + leaf instance-id { + type uint64; + description + "Instance of the segment list within the sub-TLV"; + } + + leaf weight { + type uint32; + description + "The weight given to the path within the set of segment + lists that are included in the tunnel attribute sub-TLV."; + } + } + + grouping bgp-tunnel-encapsulation-attr-tunnel-subtlv-segment-state { + description + "State parameters relating to a segment within the segment list."; + + leaf index { + type uint64; + description + "Index of the segment within the segment list. The segments are + ordered in ascending order, beginning at 0."; + } + + leaf type { + type enumeration { + enum MPLS_SID { + description + "The segment is specified as an MPLS label."; + value 1; + } + enum IPV6_SID { + description + "The segment is specified as an IPv6 address."; + value 2; + } + enum IPV4_NODE_ADDRESS { + description + "The segment is specified as an IPv4 node address with + optional SID."; + value 3; + } + enum IPV6_NODE_ADDRESS { + description + "The segment is specified as an IPv6 node address with + optional SID."; + value 4; + } + enum IPV4_LOCAL_INTF_ID { + description + "The segment is specified as an IPv4 address with a + local interface identifier along with an ."; + value 5; + } + enum IPV4_LOCAL_REMOTE_ADDR { + description + "The segment is specified as an IPv4 local and remote + address with an optional SID."; + value 6; + } + enum IPV6_LOCAL_INTF_ID { + description + "The segment is specified as an IPv6 address with an + index, along with an optional SID."; + value 7; + } + enum IPV6_LOCAL_REMOTE_ADDR { + description + "The segmetn is specified as an IPv6 local and remote + address with an optional SID."; + value 8; + } + } + description + "The type of segment specified within the segment entry."; + } + + leaf sid { + type oc-sr:sr-sid-type; + description + "SID value for the segment entry, specified as an MPLS label + or IPv6 address."; + } + + leaf mpls-tc { + when "../type = 'MPLS_SID'" { + description + "The MPLS TC bits can only be specified when the segment + time is an MPLS label."; + } + type uint8 { + range "0..7"; + } + description + "The MPLS TC bits used when the SID is specified as an MPLS + label. If set to zero, the receiving system specifies the + value of the TC bits."; + } + + leaf mpls-bos { + when "../type = 'MPLS_SID'" { + description + "The MPLS BoS bit can only be specified when the segment + type is an MPLS label."; + } + type boolean; + description + "When this leaf is set to true the MPLS bottom-of-stack + (BoS) bit is set in the MPLS segment. The BoS bit should + always be set to zero by the sender."; + } + + leaf mpls-ttl { + when "../type = 'MPLS_SID'" { + description + "The MPLS TTL can only be set when the segment type is + an MPLS label."; + } + type uint8; + description + "The MPLS time to live (TTL) to be set for the MPLS + segment. If set to 255, the receiver specifies the + TTL value that is used for packets sent with this + segment in the stack."; + } + + leaf remote-ipv4-address { + when "../type = 'IPV4_NODE_ADDRESS' or ../type='../IPV4_ADDRESS_INDEX'" + + "or ../type='IPV4_LOCAL_INTF_ID' or " + + "../type='IPV4_LOCAL_REMOTE_ADDR'" { + description + "An IPv4 address can only be associated with the segment entry + when the type of the SID is a node address, or an IPv6 address + with an index."; + } + type oc-inet:ipv4-address; + description + "An IPv4 address specified as the remote node address. When the type + of the segment specifies only the remote address, no other addresses + are specified. When the type of the segment requires a local address, + this leaf specifies the remote IPv4 address."; + } + + leaf local-ipv4-address { + when "../type = 'IPV4_LOCAL_REMOTE_ADDR'" { + description + "A local IPv4 address can only be specified when the segment is + specified by the local and remote IPv4 interface addresses."; + } + type oc-inet:ipv4-address; + description + "An IPv4 address of a local adjacency that is used to identify + the segment."; + } + + leaf remote-ipv6-address { + when "../type = 'IPV6_NODE_ADDRESS' or ../type='IPV6_ADDRESS_INDEX'" + + "or ../type='IPV6_LOCAL_INTF_ID' or " + + "../type='IPV6_LOCAL_REMOTE_ADDR'" { + description + "An IPv6 address can only be specified with a segment entry + when the type of the SID is a node address, or an IPv6 address + with an index."; + } + type oc-inet:ipv6-address; + description + "An IPv6 address specified as the remote node address. When the type + of the segment specifies only the remote address, no other addresses + are specified. When the type of the segment requires a local address, + this leaf specifies the remote IPv6 address."; + } + + leaf local-ipv6-address { + when "../type = 'IPV6_LOCAL_REMOTE_ADDR'" { + description + "A local IPv6 address can only be speciifed when the segment + is specified by the local and remote IPv6 interface addresses."; + } + type oc-inet:ipv6-address; + description + "An IPv6 address of a local adjacency that is used to identify the + segment."; + } + + leaf local-interface-id { + when "../type = 'IPV4_LOCAL_INTF_ID' or ../type='IPV6_LOCAL_INTF_ID'" { + description + "A local interface identifier can only be specified when the + type of the segment is an IPv4 address with local interface ID, + or IPv6 address with local interface ID."; + } + type uint32; + description + "The local interface identifier to be utilised for the segment."; + reference + "draft-ietf-pce-segment-routing"; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp-ext.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp-ext.yang new file mode 100644 index 0000000..3c7cf35 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp-ext.yang @@ -0,0 +1,166 @@ +module openconfig-rib-bgp-ext { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/rib/bgp-ext"; + + prefix "oc-bgprib-ext"; + + import openconfig-rib-bgp { prefix oc-bgprib; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-rib-bgp-types { prefix oc-bgpribt; } + + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Defines additional data nodes for the OpenConfig BGP RIB model. + These items reflect extensions that are desirable features but + are not currently supported in a majority of BGP + implementations."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + revision "2016-04-11" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + + grouping rib-ext-route-annotations { + description + "Extended annotations for routes in the routing tables"; + + leaf reject-reason { + type union { + type identityref { + base oc-bgpribt:BGP_NOT_SELECTED_BESTPATH; + } + type identityref { + base oc-bgpribt:BGP_NOT_SELECTED_POLICY; + } + } + description + "Indicates the reason the route is not used, either due to + policy filtering or bestpath selection"; + } + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv4-unicast/oc-bgprib:loc-rib/" + + "oc-bgprib:routes/oc-bgprib:route/oc-bgprib:state" { + description + "Add extended annotations to the Loc-RIB for IPv4"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv6-unicast/oc-bgprib:loc-rib/" + + "oc-bgprib:routes/oc-bgprib:route/oc-bgprib:state" { + description + "Add extended annotations to the Loc-RIB for IPv6"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv4-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-in-pre/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state" { + description + "Add extended annotations to Adj-RIB for IPv4"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv4-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-in-post/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv4"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv4-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-out-pre/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv4"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv4-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-out-post/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv4"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv6-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-in-pre/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv6"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv6-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-in-post/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv6"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv6-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-out-pre/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv6"; + + uses rib-ext-route-annotations; + } + + augment "/oc-bgprib:bgp-rib/oc-bgprib:afi-safis/" + + "oc-bgprib:afi-safi/oc-bgprib:ipv6-unicast/" + + "oc-bgprib:neighbors/oc-bgprib:neighbor/" + + "oc-bgprib:adj-rib-out-post/oc-bgprib:routes/oc-bgprib:route" + + "/oc-bgprib:state"{ + description + "Add extended annotations to Adj-RIB for IPv6"; + + uses rib-ext-route-annotations; + } + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp-shared-attributes.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp-shared-attributes.yang new file mode 100644 index 0000000..77a79b6 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp-shared-attributes.yang @@ -0,0 +1,171 @@ +submodule openconfig-rib-bgp-shared-attributes { + + belongs-to openconfig-rib-bgp { + prefix "oc-rib-bgp"; + } + + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + include openconfig-rib-bgp-attributes; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains structural data definitions for + attribute sets shared across routes."; + + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + + grouping attribute-sets-top { + description + "Top level grouping for list of common attribute sets"; + + container attr-sets { + description + "Enclosing container for the list of path attribute sets"; + + list attr-set { + key "index"; + + description + "List of path attributes that may be in use by multiple + routes in the table"; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to list key"; + } + + container state { + config false; + description + "Operational state for common path attributes"; + + leaf index { + type uint64; + description + "System generated index for each attribute set. The + index is used to reference an attribute set from a + specific path. Multiple paths may reference the same + attribute set."; + } + + uses bgp-shared-common-attr-state; + } + uses bgp-aggregator-attr-top; + uses bgp-as-path-attr-top; + uses bgp-as4-path-attr-top; + uses bgp-tunnel-encapsulation-attr-top; + } + } + } + + grouping community-sets-top { + description + "Top level grouping for list of shared community attribute + sets"; + + container communities { + description + "Enclosing container for the list of community attribute + sets"; + + list community { + key "index"; + + description + "List of path attributes that may be in use by multiple + routes in the table"; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to the list key"; + } + + container state { + config false; + description + "Operational state for shared BGP community attribute"; + + leaf index { + type uint64; + description + "System generated index for each attribute set. The + index is used to reference an attribute set from a + specific path. Multiple paths may reference the same + attribute set."; + } + + uses bgp-community-attr-state; + } + } + } + } + + grouping ext-community-sets-top { + description + "Top level grouping for list of extended community attribute + sets"; + + container ext-communities { + description + "Enclosing container for the list of extended community + attribute sets"; + + list ext-community { + key "index"; + + description + "List of path attributes that may be in use by multiple + routes in the table"; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to the list key"; + } + + container state { + config false; + description + "Operational state for shared BGP extended community + attribute"; + + leaf index { + type uint64; + description + "System generated index for each attribute set. The + index is used to reference an attribute set from a + specific path. Multiple paths may reference the same + attribute set."; + } + + uses bgp-extended-community-attr-state; + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp-table-attributes.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp-table-attributes.yang new file mode 100644 index 0000000..285f0a9 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp-table-attributes.yang @@ -0,0 +1,113 @@ +submodule openconfig-rib-bgp-table-attributes { + + belongs-to openconfig-rib-bgp { + prefix "oc-rib-bgp"; + } + + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + import openconfig-rib-bgp-types { prefix oc-bgpribt; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains common data definitions for data + related to a RIB entry, or RIB table."; + + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + + + grouping bgp-common-route-annotations-state { + description + "Data definitions for flags and other information attached + to routes in both LOC-RIB and Adj-RIB"; + + leaf last-modified { + type oc-types:timeticks64; + description + "Timestamp when this path was last modified. + + The value is the timestamp in seconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf valid-route { + type boolean; + description + "Indicates that the route is considered valid by the + local router"; + } + + leaf invalid-reason { + type identityref { + base oc-bgpribt:INVALID_ROUTE_REASON; + } + description + "If the route is rejected as invalid, this indicates the + reason."; + } + + } + + grouping bgp-loc-rib-route-annotations-state { + description + "Data definitions for information attached to routes in the + LOC-RIB"; + + // placeholder for route metadata specific to the LOC-RIB + + } + + grouping bgp-adj-rib-in-post-route-annotations-state { + description + "Data definitions for information attached to routes in the + Adj-RIB-in post-policy table"; + + leaf best-path { + type boolean; + description + "Current path was selected as the best path."; + } + } + + grouping bgp-common-table-attrs-state { + description + "Common attributes attached to all routing tables"; + + // placeholder for metadata associated with all tables + } + + grouping bgp-common-table-attrs-top { + description + "Operational state data for common attributes attached to + all routing tables"; + // no enclosing container as this data will fit under an + // existing LOC-RIB container + + container state { + config false; + description + "Operational state data for data related to the entire + LOC-RIB"; + + uses bgp-common-table-attrs-state; + } + } + + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp-tables.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp-tables.yang new file mode 100644 index 0000000..f7a759d --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp-tables.yang @@ -0,0 +1,883 @@ +submodule openconfig-rib-bgp-tables { + + belongs-to openconfig-rib-bgp { + prefix "oc-rib-bgp"; + } + + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-policy-types { prefix oc-pol-types; } + + include openconfig-rib-bgp-attributes; + include openconfig-rib-bgp-shared-attributes; + include openconfig-rib-bgp-table-attributes; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This submodule contains structural data definitions for + BGP routing tables."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + + grouping bgp-adj-rib-common-attr-refs { + description + "Definitions of common references to attribute sets for + multiple AFI-SAFIs for Adj-RIB tables"; + + leaf attr-index { + type leafref { + path "../../../../../../../../../../attr-sets/attr-set/" + + "state/index"; + } + description + "Reference to the common attribute group for the + route"; + } + + leaf community-index { + type leafref { + path "../../../../../../../../../../communities/community/" + + "state/index"; + } + description + "Reference to the community attribute for the route"; + } + + leaf ext-community-index { + type leafref { + path "../../../../../../../../../../ext-communities/" + + "ext-community/state/index"; + } + description + "Reference to the extended community attribute for the + route"; + } + } + + grouping bgp-loc-rib-common-attr-refs { + description + "Definitions of common references to attribute sets for + multiple AFI-SAFIs for LOC-RIB tables"; + + leaf attr-index { + type leafref { + path "../../../../../../../../attr-sets/attr-set/" + + "state/index"; + } + description + "Reference to the common attribute group for the + route"; + } + + leaf community-index { + type leafref { + path "../../../../../../../../communities/community/" + + "state/index"; + } + description + "Reference to the community attribute for the route"; + } + + leaf ext-community-index { + type leafref { + path "../../../../../../../../ext-communities/" + + "ext-community/state/index"; + } + description + "Reference to the extended community attribute for the + route"; + } + } + + grouping bgp-loc-rib-common-keys { + description + "Common references used in keys for IPv4 and IPv6 + LOC-RIB entries"; + + leaf origin { + type union { + type oc-inet:ip-address; + type identityref { + base oc-pol-types:INSTALL_PROTOCOL_TYPE; + } + } + description + "Indicates the origin of the route. If the route is learned + from a neighbor, this value is the neighbor address. If + the route was injected or redistributed from another + protocol, the origin indicates the source protocol for the + route."; + } + + leaf path-id { + type uint32; + default 0; + description + "If the route is learned from a neighbor, the path-id + corresponds to the path-id for the route in the + corresponding adj-rib-in-post table. If the route is + injected from another protocol, or the neighbor does not + support BGP add-paths, the path-id should be set + to zero, also the default value."; + } + } + + grouping bgp-loc-rib-key-refs { + description + "Key references to support operational state structure for + the BGP LOC-RIB table"; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the prefix list key"; + } + + leaf origin { + type leafref { + path "../state/origin"; + } + description + "Reference to the origin list key"; + } + + leaf path-id { + type leafref { + path "../state/path-id"; + } + description + "Reference to the path-id list key"; + } + } + + grouping ipv4-loc-rib-top { + description + "Top-level grouping for IPv4 routing tables"; + + container loc-rib { + config false; + description + "Container for the IPv4 BGP LOC-RIB data"; + + uses bgp-common-table-attrs-top; + + container routes { + description + "Enclosing container for list of routes in the routing + table."; + + list route { + key "prefix origin path-id"; + + description + "List of routes in the table, keyed by the route + prefix, the route origin, and path-id. The route + origin can be either the neighbor address from which + the route was learned, or the source protocol that + injected the route. The path-id distinguishes routes + for the same prefix received from a neighbor (e.g., + if add-paths is eanbled)."; + + uses bgp-loc-rib-key-refs; + + container state { + description + "Operational state data for route entries in the + BGP LOC-RIB"; + + leaf prefix { + type oc-inet:ipv4-prefix; + description + "The IPv4 prefix corresponding to the route"; + } + + uses bgp-loc-rib-common-keys; + uses bgp-loc-rib-common-attr-refs; + uses bgp-loc-rib-attr-state; + uses bgp-common-route-annotations-state; + uses bgp-loc-rib-route-annotations-state; + + } + + uses bgp-unknown-attr-top; + + } + } + } + } + + grouping ipv6-loc-rib-top { + description + "Top-level grouping for IPv6 routing tables"; + + container loc-rib { + config false; + description + "Container for the IPv6 BGP LOC-RIB data"; + + uses bgp-common-table-attrs-top; + + container routes { + description + "Enclosing container for list of routes in the routing + table."; + + list route { + key "prefix origin path-id"; + + description + "List of routes in the table, keyed by the route + prefix, the route origin, and path-id. The route + origin can be either the neighbor address from which + the route was learned, or the source protocol that + injected the route. The path-id distinguishes routes + for the same prefix received from a neighbor (e.g., + if add-paths is eanbled)."; + + uses bgp-loc-rib-key-refs; + + container state { + description + "Operational state data for route entries in the + BGP LOC-RIB"; + + leaf prefix { + type oc-inet:ipv6-prefix; + description + "The IPv6 prefix corresponding to the route"; + } + + uses bgp-loc-rib-common-keys; + uses bgp-loc-rib-common-attr-refs; + uses bgp-loc-rib-attr-state; + uses bgp-common-route-annotations-state; + uses bgp-loc-rib-route-annotations-state; + + } + + uses bgp-unknown-attr-top; + } + } + } + } + + grouping bgp-adj-rib-key-refs { + description + "Key references to support operational state structure for + the BGP Adj-RIB tables"; + + leaf prefix { + type leafref { + path "../state/prefix"; + } + description + "Reference to the prefix list key"; + } + + leaf path-id { + type leafref { + path "../state/path-id"; + } + description + "Reference to the path-id list key"; + } + } + + grouping ipv4-adj-rib-common { + description + "Common structural grouping for each IPv4 adj-RIB table"; + + uses bgp-common-table-attrs-top; + + container routes { + config false; + description + "Enclosing container for list of routes in the routing + table."; + + list route { + key "prefix path-id"; + + description + "List of routes in the table, keyed by a combination of + the route prefix and path-id to distinguish multiple + routes received from a neighbor for the same prefix, + e.g., when BGP add-paths is enabled."; + + uses bgp-adj-rib-key-refs; + + container state { + description + "Operational state data for BGP Adj-RIB entries"; + + leaf prefix { + type oc-inet:ipv4-prefix; + description + "Prefix for the route"; + } + + uses bgp-adj-rib-attr-state; + uses bgp-adj-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + } + + uses bgp-unknown-attr-top; + + } + } + } + + grouping ipv4-adj-rib-in-post { + description + "Common structural grouping for the IPv4 adj-rib-in + post-policy table"; + + uses bgp-common-table-attrs-top; + + container routes { + config false; + description + "Enclosing container for list of routes in the routing + table."; + + list route { + key "prefix path-id"; + + description + "List of routes in the table, keyed by a combination of + the route prefix and path-id to distinguish multiple + routes received from a neighbor for the same prefix, + e.g., when BGP add-paths is enabled."; + + uses bgp-adj-rib-key-refs; + + container state { + description + "Operational state data for BGP Adj-RIB entries"; + + leaf prefix { + type oc-inet:ipv4-prefix; + description + "Prefix for the route"; + } + + uses bgp-adj-rib-attr-state; + uses bgp-adj-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + uses bgp-adj-rib-in-post-route-annotations-state; + } + + uses bgp-unknown-attr-top; + } + } + } + + + grouping ipv4-adj-rib-top { + description + "Top-level grouping for Adj-RIB table"; + + container neighbors { + config false; + description + "Enclosing container for neighbor list"; + + list neighbor { + key "neighbor-address"; + description + "List of neighbors (peers) of the local BGP speaker"; + + leaf neighbor-address { + type leafref { + path "../state/neighbor-address"; + } + description + "Reference to the list key"; + } + + container state { + description + "Operational state for each neighbor BGP Adj-RIB"; + + leaf neighbor-address { + type oc-inet:ip-address; + description + "IP address of the BGP neighbor or peer"; + } + } + + container adj-rib-in-pre { + description + "Per-neighbor table containing the NLRI updates + received from the neighbor before any local input + policy rules or filters have been applied. This can + be considered the 'raw' updates from the neighbor."; + + uses ipv4-adj-rib-common; + + } + + container adj-rib-in-post { + description + "Per-neighbor table containing the paths received from + the neighbor that are eligible for best-path selection + after local input policy rules have been applied."; + + uses ipv4-adj-rib-in-post; + } + + container adj-rib-out-pre { + description + "Per-neighbor table containing paths eligble for + sending (advertising) to the neighbor before output + policy rules have been applied"; + + uses ipv4-adj-rib-common; + + } + + container adj-rib-out-post { + description + "Per-neighbor table containing paths eligble for + sending (advertising) to the neighbor after output + policy rules have been applied"; + + uses ipv4-adj-rib-common; + + } + } + } + } + + grouping ipv6-adj-rib-common { + description + "Common structural grouping for each IPv6 adj-RIB table"; + + uses bgp-common-table-attrs-state; + + container routes { + config false; + description + "Enclosing container for list of routes in the routing + table."; + + list route { + key "prefix path-id"; + + description + "List of routes in the table"; + + uses bgp-adj-rib-key-refs; + + container state { + description + "Operational state data for BGP Adj-RIB entries"; + + leaf prefix { + type oc-inet:ipv6-prefix; + description + "Prefix for the route"; + } + + uses bgp-adj-rib-attr-state; + uses bgp-adj-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + } + + uses bgp-unknown-attr-top; + } + } + } + + grouping ipv6-adj-rib-in-post { + description + "Common structural grouping for the IPv6 adj-rib-in + post-policy table"; + + uses bgp-common-table-attrs-state; + + container routes { + config false; + description + "Enclosing container for list of routes in the routing + table."; + + list route { + key "prefix path-id"; + + description + "List of routes in the table"; + + uses bgp-adj-rib-key-refs; + + container state { + description + "Operational state data for BGP Adj-RIB entries"; + + leaf prefix { + type oc-inet:ipv6-prefix; + description + "Prefix for the route"; + } + + uses bgp-adj-rib-attr-state; + uses bgp-adj-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + uses bgp-adj-rib-in-post-route-annotations-state; + } + + uses bgp-unknown-attr-top; + } + } + } + + grouping ipv6-adj-rib-top { + description + "Top-level grouping for Adj-RIB table"; + + container neighbors { + config false; + description + "Enclosing container for neighbor list"; + + list neighbor { + key "neighbor-address"; + description + "List of neighbors (peers) of the local BGP speaker"; + + leaf neighbor-address { + type leafref { + path "../state/neighbor-address"; + } + description + "Reference to the list key"; + } + + container state { + description + "Operational state for each neighbor BGP Adj-RIB"; + + leaf neighbor-address { + type oc-inet:ip-address; + description + "IP address of the BGP neighbor or peer"; + } + } + + container adj-rib-in-pre { + description + "Per-neighbor table containing the NLRI updates + received from the neighbor before any local input + policy rules or filters have been applied. This can + be considered the 'raw' updates from the neighbor."; + + uses ipv6-adj-rib-common; + + } + + container adj-rib-in-post { + description + "Per-neighbor table containing the paths received from + the neighbor that are eligible for best-path selection + after local input policy rules have been applied."; + + uses ipv6-adj-rib-in-post; + } + + container adj-rib-out-pre { + description + "Per-neighbor table containing paths eligble for + sending (advertising) to the neighbor before output + policy rules have been applied"; + + uses ipv6-adj-rib-common; + + } + + container adj-rib-out-post { + description + "Per-neighbor table containing paths eligble for + sending (advertising) to the neighbor after output + policy rules have been applied"; + + uses ipv6-adj-rib-common; + + } + } + } + } + + grouping ipvX-srte-policy-adjrib-top { + description + "Top-level grouping for the IPv4 and IPv6 AFI, SR-TE Policy SAFI + Adj-RIBs."; + + container neighbors { + description + "Surrounding container for the list of neighbours that are + enabled for the IPv4 and IPv6 AFI, SR-TE Policy SAFI address + family."; + + list neighbor { + key "neighbor-address"; + + description + "An individual neighbour that is enabled for the SR-TE + Policy SAFI."; + + leaf neighbor-address { + type leafref { + path "../state/neighbor-address"; + } + description + "Reference to the address of the neighbour for which the + Adj-RIBs specified are maintained."; + } + + container state { + description + "Operational state parameters of the BGP neighbour for + which the SR-TE Policy SAFI is enabled."; + uses ipvX-srte-policy-adjrib-neighbor-state; + } + + container adj-rib-in-pre { + description + "The Adj-RIB-In for the SR-TE Policy SAFI for the neighbour, + prior to any inbound policy constraints or modifications + having been applied."; + uses ipvX-srte-policy-adjrib-common; + } + + container adj-rib-in-post { + description + "The Adj-RIB-In for the SR-TE Policy SAFI for the neighbour, + following any inbound policy constraints or modifications + being made."; + uses ipvX-srte-policy-adjrib-in-post; + } + + container adj-rib-out-pre { + description + "The Adj-RIB-Out for the SR-TE Policy SAFI for the neighbour, + prior to any outgoing policy modifications or constraints + having been applied."; + uses ipvX-srte-policy-adjrib-common; + } + + container adj-rib-out-post { + description + "The Adj-RIB-Out for the SR-TE Policy SAFI for the neighbour, + follow any outbound policy constraints or modifications being + made."; + uses ipvX-srte-policy-adjrib-common; + } + } + } + } + + grouping ipvX-srte-policy-adjrib-neighbor-state { + description + "Common attributes for each neighbour for which the SR-TE + Policy SAFI RIBs are being maintained."; + + leaf neighbor-address { + description + "The address of the neighbour for which the SR-TE policy + SAFI has been negotiated."; + type oc-inet:ip-address; + } + } + + grouping ipvX-srte-policy-adjrib-common { + description + "Common structure containing the routes that are learnt via + the IPv4 or IPv6 SR-TE Policy SAFI."; + + container routes { + description + "Surrounding container for the list of routes within the + SR-TE Policy SAFI."; + + list route { + key "path-id endpoint color"; + + description + "The routes within the SR-TE Policy SAFI Adj-RIB. The + routes are keyed on the path-id - set to a non-zero + value only if ADD-PATHS is being used; the color; and + the endpoint. The colour and endpoint are extracted from + the NLRI."; + + uses ipvX-srte-policy-common-keys; + + container state { + description + "State parameters for entries within the Adj-RIB used + to store SR-TE Policy SAFI routes."; + + uses ipvX-srte-policy-common-route-state; + uses bgp-adj-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + } + + uses bgp-unknown-attr-top; + } + } + } + + grouping ipvX-srte-policy-common-route-state { + description + "Common attributes used SR-TE Policy SAFI routes."; + + leaf path-id { + type uint32; + default 0; + description + "Identifier for the path when using BGP ADD-PATHS for the SR-TE + policy SAFI."; + } + + leaf endpoint { + type oc-inet:ip-address; + description + "A unique identifier for the remote set of nodes. When the address + family is IPv4, the value is a 4-octet IPv4 address. When the + address family is IPv6, the value is a 16-octet IPv6 address."; + } + + leaf color { + type uint32; + description + "A 4-octet value identifying the policy. Combined with the endpoint + the endpoint and colour represent the unique policy."; + } + } + + grouping ipvX-srte-policy-common-keys { + description + "Common grouping of the keys used for lists of SR-TE policy + SAFI routes."; + + leaf path-id { + type leafref { + path "../state/path-id"; + } + description + "Reference to the path identifier for the SR-TE Policy SAFI + route. The value is only non-zero if ADD-PATHS is not being + used."; + } + + leaf endpoint { + type leafref { + path "../state/endpoint"; + } + description + "Reference to the endpoint used for the SR-TE Policy SAFI + route within the NLRI."; + } + + leaf color { + type leafref { + path "../state/color"; + } + description + "Reference to the colour used for the SR-TE policy SAFI + route within the NLRI."; + } + } + + grouping ipvX-srte-policy-adjrib-in-post { + description + "Grouping for the post-policy Adj-RIB-In for SR-TE Policy SAFI routes"; + + container routes { + description + "The set of routes that are within the Adj-RIB-Out for the + neighbour."; + + list route { + key "path-id endpoint color"; + + description + "The routes that are in the Adj-RIB-In-Post for the specified + BGP neighbour within the SR-TE Policy SAFI for the specified + address family."; + + uses ipvX-srte-policy-common-keys; + + container state { + description + "Operational state attributes related to the route within + the SR-TE Policy SAFI Adj-RIB-In-Post for the specified + neighbour."; + + uses ipvX-srte-policy-common-route-state; + uses bgp-adj-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + uses bgp-adj-rib-in-post-route-annotations-state; + } + + uses bgp-unknown-attr-top; + } + } + } + + grouping ipvX-srte-policy-locrib-top { + description + "Top-level grouping for the Loc-RIB for IPv4 or IPv6 Adj-RIB + for SR-TE Policy SAFI."; + + container loc-rib { + description + "The Loc-RIB for the SR-TE Policy SAFI for IPv4 or IPv6 Unicast + AFIs."; + + container routes { + description + "List of routes within the SR-TE Policy SAFI, for the IPv4 or + IPv6 AFI."; + + list route { + key "path-id endpoint color"; + + description + "Route within the specified address family for the SR-TE + Policy SAFI."; + + uses ipvX-srte-policy-common-keys; + + container state { + description + "Operational state attributes for each route within the + IPv4 or IPv6 Unicast SR-TE Policy SAFI."; + + uses ipvX-srte-policy-common-route-state; + uses bgp-loc-rib-common-attr-refs; + uses bgp-common-route-annotations-state; + } + + uses bgp-unknown-attr-top; + } + } + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp-types.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp-types.yang new file mode 100644 index 0000000..3c0d1b0 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp-types.yang @@ -0,0 +1,244 @@ +module openconfig-rib-bgp-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/rib/bgp-types"; + + prefix "oc-bgprib-types"; + + import openconfig-extensions { prefix oc-ext; } + + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Defines identity and type defintions associated with + the OpenConfig BGP RIB modules"; + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + revision "2016-04-11" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + identity INVALID_ROUTE_REASON { + description + "Base identity for reason code for routes that are rejected as + invalid. Some derived entities are based on BMP v3"; + reference "BGP Monitoring Protocol (draft-ietf-grow-bmp-07)"; + } + + identity INVALID_CLUSTER_LOOP { + base INVALID_ROUTE_REASON; + description + "Route was invalid due to CLUSTER_LIST loop"; + } + + identity INVALID_AS_LOOP { + base INVALID_ROUTE_REASON; + description + "Route was invalid due to AS_PATH loop"; + } + + identity INVALID_ORIGINATOR { + base INVALID_ROUTE_REASON; + description + "Route was invalid due to ORIGINATOR_ID, e.g., update has + local router as originator"; + } + + identity INVALID_CONFED { + base INVALID_ROUTE_REASON; + description + "Route was invalid due to a loop in the AS_CONFED_SEQUENCE or + AS_CONFED_SET attributes"; + } + + identity BGP_NOT_SELECTED_BESTPATH { + description + "Base identity for indicating reason a route was was not + selected by BGP route selection algorithm"; + reference + "RFC 4271 - Section 9.1"; + } + + identity LOCAL_PREF_LOWER { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route has a lower localpref attribute than current best path"; + reference + "RFC 4271 - Section 9.1.2"; + } + + identity AS_PATH_LONGER { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route has a longer AS path attribute than current best path"; + reference + "RFC 4271 - Section 9.1.2.2 (a)"; + } + + identity ORIGIN_TYPE_HIGHER { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route has a higher origin type, i.e., IGP origin is preferred + over EGP or incomplete"; + reference + "RFC 4271 - Section 9.1.2.2 (b)"; + } + + identity MED_HIGHER { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route has a higher MED, or metric, attribute than the current + best path"; + reference + "RFC 4271 - Section 9.1.2.2 (c)"; + } + + identity PREFER_EXTERNAL { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route source is via IGP, rather than EGP."; + reference + "RFC 4271 - Section 9.1.2.2 (d)"; + } + + identity NEXTHOP_COST_HIGHER { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route has a higher interior cost to the next hop."; + reference + "RFC 4271 - Section 9.1.2.2 (e)"; + } + + identity HIGHER_ROUTER_ID { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route was sent by a peer with a higher BGP Identifier value, + or router id"; + reference + "RFC 4271 - Section 9.1.2.2 (f)"; + } + + identity HIGHER_PEER_ADDRESS { + base BGP_NOT_SELECTED_BESTPATH; + description + "Route was sent by a peer with a higher IP address"; + reference + "RFC 4271 - Section 9.1.2.2 (g)"; + } + + identity BGP_NOT_SELECTED_POLICY { + description + "Base identity for reason code for routes that are rejected + due to policy"; + } + + identity REJECTED_IMPORT_POLICY { + base BGP_NOT_SELECTED_POLICY; + description + "Route was rejected after apply import policies"; + } + + identity TUNNEL_ENCAPSULATION_TYPE { + description + "Types of tunnel encapsulation, as described by the Tunnel + Encapsulation attribute"; + reference + "RFC5512"; + } + + identity SRTE_POLICY_TUNNEL { + base TUNNEL_ENCAPSULATION_TYPE; + description + "Segment Routing Traffic Engineering Policy tunnel."; + reference + "draft-previdi-idr-segment-routing-te-policy"; + } + + identity TUNNEL_ENCAPSULATION_SUBTLV_TYPE { + description + "SubTLVs of the Tunnel Encapsulation attribute"; + reference + "RFC5512"; + } + + identity TUNNEL_REMOTE_ENDPOINT { + base TUNNEL_ENCAPSULATION_SUBTLV_TYPE; + description + "Remote endpoint of the tunnel."; + reference + "RFC5512"; + } + + identity TUNNEL_COLOR { + base TUNNEL_ENCAPSULATION_SUBTLV_TYPE; + description + "Colour of the tunnel"; + reference + "RFC5512"; + } + + identity SRTE_PREFERENCE { + base TUNNEL_ENCAPSULATION_SUBTLV_TYPE; + description + "Preference of the SR-TE policy entry described by + the tunnel encapsulation attribute."; + reference + "draft-previdi-idr-segment-routing-te-policy"; + } + + identity SRTE_BINDING_SID { + base TUNNEL_ENCAPSULATION_SUBTLV_TYPE; + description + "Binding SID to be used by the SR-TE policy described + by the tunnel encapsulation attribute."; + reference + "draft-previdi-idr-segment-routing-te-policy"; + } + + identity SRTE_SEGMENT_LIST { + base TUNNEL_ENCAPSULATION_SUBTLV_TYPE; + description + "Segment lists to be used by the SR-TE policy described + by the tunnel encapsulation attribute."; + reference + "draft-previdi-idr-segment-routing-te-policy"; + } + + identity SRTE_SEGMENT_LIST_SUBTLV { + description + "SubTLVs of the SR-TE Policy Segment List sub-TLV of the + Tunnel Encapsulation attribute."; + reference + "draft-previdi-idr-segment-routing-te-policy"; + } + + identity SRTE_SEGMENT_LIST_WEIGHT { + base SRTE_SEGMENT_LIST_SUBTLV; + description + "Weight of the segment list within the SR-TE policy"; + reference + "draft-previdi-idr-segment-routing-te-policy"; + } + + identity SRTE_SEGMENT_LIST_SEGMENT { + base SRTE_SEGMENT_LIST_SUBTLV; + description + "An individual element within the SR-TE Policy Segment + List."; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-rib-bgp.yang b/src/plugins/yang/openconfig/openconfig-rib-bgp.yang new file mode 100644 index 0000000..7fc4828 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rib-bgp.yang @@ -0,0 +1,209 @@ +module openconfig-rib-bgp { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/rib/bgp"; + + prefix "oc-rib-bgp"; + + // import some basic types + import openconfig-bgp-types { prefix oc-bgpt; } + import openconfig-extensions { prefix oc-ext; } + + // include RIB submodules + + // structure for LOC-RIB and Adj-RIB tables + include openconfig-rib-bgp-tables; + + // structure of shared attribute groups + include openconfig-rib-bgp-shared-attributes; + + // groupings of attributes in three categories: + // - shared across multiple routes + // - common to LOC-RIB and Adj-RIB, but not shared across routes + // - specific to LOC-RIB or Adj-RIB + include openconfig-rib-bgp-attributes; + + // groupings of annotations for each route or table + include openconfig-rib-bgp-table-attributes; + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "Defines a data model for representing BGP routing table (RIB) + contents. The model supports 5 logical RIBs per address family: + + loc-rib: This is the main BGP routing table for the local routing + instance, containing best-path selections for each prefix. The + loc-rib table may contain multiple routes for a given prefix, + with an attribute to indicate which was selected as the best + path. Note that multiple paths may be used or advertised even if + only one path is marked as best, e.g., when using BGP + add-paths. An implementation may choose to mark multiple + paths in the RIB as best path by setting the flag to true for + multiple entries. + + adj-rib-in-pre: This is a per-neighbor table containing the NLRI + updates received from the neighbor before any local input policy + rules or filters have been applied. This can be considered the + 'raw' updates from a given neighbor. + + adj-rib-in-post: This is a per-neighbor table containing the + routes received from the neighbor that are eligible for + best-path selection after local input policy rules have been + applied. + + adj-rib-out-pre: This is a per-neighbor table containing routes + eligible for sending (advertising) to the neighbor before output + policy rules have been applied. + + adj-rib-out-post: This is a per-neighbor table containing routes + eligible for sending (advertising) to the neighbor after output + policy rules have been applied."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2016-10-17" { + description + "OpenConfig BGP RIB refactor"; + reference "0.3.0"; + } + + revision "2016-04-11" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + + + // grouping statements + + + + grouping bgp-rib-state { + description + "Operational state data for the top level BGP RIB"; + + leaf afi-safi-name { + type identityref { + base oc-bgpt:AFI_SAFI_TYPE; + } + description "AFI,SAFI"; + } + } + + grouping bgp-rib-top { + description + "Top-level grouping for the BGP RIB"; + + container bgp-rib { + config false; + description + "Top level container for BGP RIBs"; + + uses attribute-sets-top; + uses community-sets-top; + uses ext-community-sets-top; + + container afi-safis { + config false; + description + "Enclosing container for address family list"; + + list afi-safi { + key "afi-safi-name"; + description + "list of afi-safi types"; + + leaf afi-safi-name { + type leafref { + path "../state/afi-safi-name"; + } + description + "Reference to the list key"; + } + + container state { + config false; + description + "Operational state data for the BGP list"; + + uses bgp-rib-state; + } + + container ipv4-unicast { + when "../afi-safi-name = 'oc-bgpt:IPV4_UNICAST'" { + description + "Include this container for IPv4 unicast RIB"; + } + description + "Routing tables for IPv4 unicast -- active when the + afi-safi name is ipv4-unicast"; + + uses ipv4-loc-rib-top; + uses ipv4-adj-rib-top; + } + + container ipv6-unicast { + when "../afi-safi-name = 'oc-bgpt:IPV6_UNICAST'" { + description + "Include this container for IPv6 unicast RIB"; + } + description + "Routing tables for IPv6 unicast -- active when the + afi-safi name is ipv6-unicast"; + + uses ipv6-loc-rib-top; + uses ipv6-adj-rib-top; + } + + container ipv4-srte-policy { + when "../afi-safi-name = 'oc-bgpt:SRTE_POLICY_IPV4'" { + description + "Include this container only for the IPv4 AFI, SR-TE Policy + SAFI."; + } + description + "Routing tables for the IPv4 Unicast, SR-TE Policy SAFI."; + + uses ipvX-srte-policy-locrib-top; + uses ipvX-srte-policy-adjrib-top; + } + + container ipv6-srte-policy { + when "../afi-safi-name = 'oc-bgpt:SRTE_POLICY_IPV6'" { + description + "Include this container only for the IPv6 AFI, SR-TE Policy + SAFI."; + } + description + "Routing tables for the IPv6 Unicast, SR-TE Policy SAFI."; + + uses ipvX-srte-policy-locrib-top; + uses ipvX-srte-policy-adjrib-top; + } + } + } + } + } + + + // data definition statements + + uses bgp-rib-top; + + // augment statements + + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-routing-policy.yang b/src/plugins/yang/openconfig/openconfig-routing-policy.yang new file mode 100644 index 0000000..ca4c7ed --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-routing-policy.yang @@ -0,0 +1,1097 @@ +module openconfig-routing-policy { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/routing-policy"; + + prefix "oc-rpol"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-policy-types { prefix oc-pol-types; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module describes a YANG model for routing policy + configuration. It is a limited subset of all of the policy + configuration parameters available in the variety of vendor + implementations, but supports widely used constructs for managing + how routes are imported, exported, and modified across different + routing protocols. This module is intended to be used in + conjunction with routing protocol configuration models (e.g., + BGP) defined in other modules. + + Route policy expression: + + Policies are expressed as a set of top-level policy definitions, + each of which consists of a sequence of policy statements. Policy + statements consist of simple condition-action tuples. Conditions + may include mutiple match or comparison operations, and similarly + actions may be multitude of changes to route attributes or a + final disposition of accepting or rejecting the route. + + Route policy evaluation: + + Policy definitions are referenced in routing protocol + configurations using import and export configuration statements. + The arguments are members of an ordered list of named policy + definitions which comprise a policy chain, and optionally, an + explicit default policy action (i.e., reject or accept). + + Evaluation of each policy definition proceeds by evaluating its + corresponding individual policy statements in order. When a + condition statement in a policy statement is satisfied, the + corresponding action statement is executed. If the action + statement has either accept-route or reject-route actions, policy + evaluation of the current policy definition stops, and no further + policy definitions in the chain are evaluated. + + If the condition is not satisfied, then evaluation proceeds to + the next policy statement. If none of the policy statement + conditions are satisfied, then evaluation of the current policy + definition stops, and the next policy definition in the chain is + evaluated. When the end of the policy chain is reached, the + default route disposition action is performed (i.e., reject-route + unless an an alternate default action is specified for the + chain). + + Policy 'subroutines' (or nested policies) are supported by + allowing policy statement conditions to reference another policy + definition which applies conditions and actions from the + referenced policy before returning to the calling policy + statement and resuming evaluation. If the called policy + results in an accept-route (either explicit or by default), then + the subroutine returns an effective true value to the calling + policy. Similarly, a reject-route action returns false. If the + subroutine returns true, the calling policy continues to evaluate + the remaining conditions (using a modified route if the + subroutine performed any changes to the route)."; + + oc-ext:openconfig-version "3.1.0"; + + revision "2018-06-05" { + description + "Add PIM, IGMP to INSTALL_PROTOCOL_TYPES identity"; + reference "3.1.0"; + } + + revision "2017-07-14" { + description + "Replace policy choice node/type with policy-result + enumeration;simplified defined set naming;removed generic + IGP actions; migrate to OpenConfig types; added mode for + prefix sets"; + reference "3.0.0"; + } + + revision "2016-05-12" { + description + "OpenConfig public release"; + reference "2.0.1"; + } + + + // typedef statements + + typedef default-policy-type { + // this typedef retained for name compatibiity with default + // import and export policy + type enumeration { + enum ACCEPT_ROUTE { + description + "Default policy to accept the route"; + } + enum REJECT_ROUTE { + description + "Default policy to reject the route"; + } + } + description + "Type used to specify route disposition in + a policy chain"; + } + + typedef policy-result-type { + type enumeration { + enum ACCEPT_ROUTE { + description "Policy accepts the route"; + } + enum REJECT_ROUTE { + description "Policy rejects the route"; + } + } + description + "Type used to specify route disposition in + a policy chain"; + } + + + // grouping statements + + grouping prefix-set-config { + description + "Configuration data for prefix sets used in policy + definitions."; + + leaf name { + type string; + description + "name / label of the prefix set -- this is used to + reference the set in match conditions"; + } + + leaf mode { + type enumeration { + enum IPV4 { + description + "Prefix set contains IPv4 prefixes only"; + } + enum IPV6 { + description + "Prefix set contains IPv6 prefixes only"; + } + enum MIXED { + description + "Prefix set contains mixed IPv4 and IPv6 prefixes"; + } + } + description + "Indicates the mode of the prefix set, in terms of which + address families (IPv4, IPv6, or both) are present. The + mode provides a hint, but the device must validate that all + prefixes are of the indicated type, and is expected to + reject the configuration if there is a discrepancy. The + MIXED mode may not be supported on devices that require + prefix sets to be of only one address family."; + } + + } + + grouping prefix-set-state { + description + "Operational state data for prefix sets"; + } + + grouping prefix-set-top { + description + "Top-level data definitions for a list of IPv4 or IPv6 + prefixes which are matched as part of a policy"; + + container prefix-sets { + description + "Enclosing container "; + + list prefix-set { + key "name"; + description + "List of the defined prefix sets"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to prefix name list key"; + } + + container config { + description + "Configuration data for prefix sets"; + + uses prefix-set-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses prefix-set-config; + uses prefix-set-state; + } + + uses prefix-top; + } + } + } + + grouping prefix-config { + description + "Configuration data for a prefix definition"; + + leaf ip-prefix { + type oc-inet:ip-prefix; + mandatory true; + description + "The prefix member in CIDR notation -- while the + prefix may be either IPv4 or IPv6, most + implementations require all members of the prefix set + to be the same address family. Mixing address types in + the same prefix set is likely to cause an error."; + } + + leaf masklength-range { + type string { + pattern '^([0-9]+\.\.[0-9]+)|exact$'; + } + description + "Defines a range for the masklength, or 'exact' if + the prefix has an exact length. + + Example: 10.3.192.0/21 through 10.3.192.0/24 would be + expressed as prefix: 10.3.192.0/21, + masklength-range: 21..24. + + Example: 10.3.192.0/21 would be expressed as + prefix: 10.3.192.0/21, + masklength-range: exact"; + } + } + + grouping prefix-state { + description + "Operational state data for prefix definitions"; + } + + grouping prefix-top { + description + "Top-level grouping for prefixes in a prefix list"; + + container prefixes { + description + "Enclosing container for the list of prefixes in a policy + prefix list"; + + list prefix { + key "ip-prefix masklength-range"; + description + "List of prefixes in the prefix set"; + + leaf ip-prefix { + type leafref { + path "../config/ip-prefix"; + } + description + "Reference to the ip-prefix list key."; + } + + leaf masklength-range { + type leafref { + path "../config/masklength-range"; + } + description + "Reference to the masklength-range list key"; + } + + container config { + description + "Configuration data for prefix definition"; + + uses prefix-config; + } + + container state { + + config false; + + description + "Operational state data for prefix definition"; + + uses prefix-config; + uses prefix-state; + } + } + } + } + + grouping neighbor-set-config { + description + "Configuration data for neighbor set definitions"; + + leaf name { + type string; + description + "name / label of the neighbor set -- this is used to + reference the set in match conditions"; + } + + leaf-list address { + type oc-inet:ip-address; + description + "List of IP addresses in the neighbor set"; + } + } + + grouping neighbor-set-state { + description + "Operational state data for neighbor set definitions"; + } + + grouping neighbor-set-top { + description + "Top-level data definition for a list of IPv4 or IPv6 + neighbors which can be matched in a routing policy"; + + container neighbor-sets { + description + "Enclosing container for the list of neighbor set + definitions"; + + list neighbor-set { + key "name"; + description + "List of defined neighbor sets for use in policies."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the neighbor set name list key."; + } + + container config { + description + "Configuration data for neighbor sets."; + + uses neighbor-set-config; + } + + container state { + + config false; + + description + "Operational state data for neighbor sets."; + + uses neighbor-set-config; + uses neighbor-set-state; + } + } + } + } + + grouping tag-set-config { + description + "Configuration data for tag set definitions."; + + leaf name { + type string; + description + "name / label of the tag set -- this is used to reference + the set in match conditions"; + } + + leaf-list tag-value { + type oc-pol-types:tag-type; + description + "Value of the tag set member"; + } + } + + grouping tag-set-state { + description + "Operational state data for tag set definitions."; + } + + grouping tag-set-top { + description + "Top-level data definitions for a list of tags which can + be matched in policies"; + + container tag-sets { + description + "Enclosing container for the list of tag sets."; + + list tag-set { + key "name"; + description + "List of tag set definitions."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the tag set name list key"; + } + + container config { + description + "Configuration data for tag sets"; + + uses tag-set-config; + } + + container state { + + config false; + + description + "Operational state data for tag sets"; + + uses tag-set-config; + uses tag-set-state; + } + } + } + } + + grouping generic-defined-sets { + description + "Data definitions for pre-defined sets of attributes used in + policy match conditions. These sets are generic and can + be used in matching conditions in different routing + protocols."; + + uses prefix-set-top; + uses neighbor-set-top; + uses tag-set-top; + } + + grouping match-set-options-group { + description + "Grouping containing options relating to how a particular set + should be matched"; + + leaf match-set-options { + type oc-pol-types:match-set-options-type; + description + "Optional parameter that governs the behaviour of the + match operation"; + } + } + + grouping match-set-options-restricted-group { + description + "Grouping for a restricted set of match operation modifiers"; + + leaf match-set-options { + type oc-pol-types:match-set-options-restricted-type; + description + "Optional parameter that governs the behaviour of the + match operation. This leaf only supports matching on ANY + member of the set or inverting the match. Matching on ALL is + not supported"; + } + } + + grouping match-interface-condition-config { + description + "Configuration data for interface match condition"; + + uses oc-if:interface-ref-common; + } + + grouping match-interface-condition-state { + description + "Operational state data for interface match condition"; + } + + grouping match-interface-condition-top { + description + "Top-level grouping for the interface match condition"; + + container match-interface { + description + "Top-level container for interface match conditions"; + + container config { + description + "Configuration data for interface match conditions"; + + uses match-interface-condition-config; + } + + container state { + + config false; + + description + "Operational state data for interface match conditions"; + + uses match-interface-condition-config; + uses match-interface-condition-state; + } + + } + } + + grouping prefix-set-condition-config { + description + "Configuration data for prefix-set conditions"; + + leaf prefix-set { + type leafref { + path "../../../../../../../../defined-sets/" + + "prefix-sets/prefix-set/config/name"; + } + description "References a defined prefix set"; + } + uses match-set-options-restricted-group; + } + + + grouping prefix-set-condition-state { + description + "Operational state data for prefix-set conditions"; + } + + grouping prefix-set-condition-top { + description + "Top-level grouping for prefix-set conditions"; + + container match-prefix-set { + description + "Match a referenced prefix-set according to the logic + defined in the match-set-options leaf"; + + container config { + description + "Configuration data for a prefix-set condition"; + + uses prefix-set-condition-config; + } + + container state { + + config false; + + description + "Operational state data for a prefix-set condition"; + + uses prefix-set-condition-config; + uses prefix-set-condition-state; + } + } + } + + grouping neighbor-set-condition-config { + description + "Configuration data for neighbor-set conditions"; + + leaf neighbor-set { + type leafref { + path "../../../../../../../../defined-sets/neighbor-sets/" + + "neighbor-set/name"; + //TODO: require-instance should be added when it's + //supported in YANG 1.1 + //require-instance true; + } + description "References a defined neighbor set"; + } + + uses match-set-options-restricted-group; + } + + grouping neighbor-set-condition-state { + description + "Operational state data for neighbor-set conditions"; + } + + grouping neighbor-set-condition-top { + description + "Top-level grouping for neighbor-set conditions"; + + container match-neighbor-set { + description + "Match a referenced neighbor set according to the logic + defined in the match-set-options-leaf"; + + container config { + description + "Configuration data "; + + uses neighbor-set-condition-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses neighbor-set-condition-config; + uses neighbor-set-condition-state; + } + } + } + + grouping tag-set-condition-config { + description + "Configuration data for tag-set condition statements"; + + leaf tag-set { + type leafref { + path "../../../../../../../../defined-sets/tag-sets/tag-set" + + "/name"; + //TODO: require-instance should be added when it's + //supported in YANG 1.1 + //require-instance true; + } + description "References a defined tag set"; + } + uses match-set-options-restricted-group; + } + + grouping tag-set-condition-state { + description + "Operational state data for tag-set condition statements"; + } + + grouping tag-set-condition-top { + description + "Top-level grouping for tag-set conditions"; + + container match-tag-set { + description + "Match a referenced tag set according to the logic defined + in the match-options-set leaf"; + + container config { + description + "Configuration data for tag-set conditions"; + + uses tag-set-condition-config; + } + + container state { + + config false; + + description + "Operational state data tag-set conditions"; + + uses tag-set-condition-config; + uses tag-set-condition-state; + } + } + } + + grouping generic-conditions { + description "Condition statement definitions for checking + membership in a generic defined set"; + + uses match-interface-condition-top; + uses prefix-set-condition-top; + uses neighbor-set-condition-top; + uses tag-set-condition-top; + + } + + grouping generic-actions { + description + "Definitions for common set of policy action statements that + manage the disposition or control flow of the policy"; + + leaf policy-result { + type policy-result-type; + description + "Select the final disposition for the route, either + accept or reject."; + } + } + + + grouping policy-conditions-config { + description + "Configuration data for general policy conditions, i.e., those + not related to match-sets"; + + leaf call-policy { + type leafref { + path "../../../../../../../" + + "oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:name"; + //TODO: require-instance should be added when + //it is supported in YANG 1.1 + //require-instance true; + } + description + "Applies the statements from the specified policy + definition and then returns control the current + policy statement. Note that the called policy may + itself call other policies (subject to + implementation limitations). This is intended to + provide a policy 'subroutine' capability. The + called policy should contain an explicit or a + default route disposition that returns an + effective true (accept-route) or false + (reject-route), otherwise the behavior may be + ambiguous and implementation dependent"; + } + + leaf install-protocol-eq { + type identityref { + base oc-pol-types:INSTALL_PROTOCOL_TYPE; + } + description + "Condition to check the protocol / method used to install + the route into the local routing table"; + } + } + + grouping policy-conditions-state { + description + "Operational state data for policy conditions"; + } + + grouping policy-conditions-top { + description + "Top-level grouping for policy conditions"; + + container conditions { + description + "Condition statements for the current policy statement"; + + container config { + description + "Configuration data for policy conditions"; + + uses policy-conditions-config; + } + + container state { + + config false; + + description + "Operational state data for policy conditions"; + + uses policy-conditions-config; + uses policy-conditions-state; + } + uses generic-conditions; + } + } + + grouping policy-statements-config { + description + "Configuration data for policy statements"; + + leaf name { + type string; + description + "name of the policy statement"; + } + } + + grouping policy-statements-state { + description + "Operational state data for policy statements"; + } + + + + grouping policy-actions-config { + description + "Configuration data for policy actions"; + + uses generic-actions; + } + + grouping policy-actions-state { + description + "Operational state data for policy actions"; + } + + grouping policy-actions-top { + description + "Top-level grouping for policy actions"; + + container actions { + description + "Top-level container for policy action statements"; + + container config { + description + "Configuration data for policy actions"; + + uses policy-actions-config; + } + + container state { + + config false; + + description + "Operational state data for policy actions"; + + uses policy-actions-config; + uses policy-actions-state; + } + } + } + + grouping policy-statements-top { + description + "Top-level grouping for the policy statements list"; + + container statements { + description + "Enclosing container for policy statements"; + + list statement { + key "name"; + // TODO: names of policy statements within a policy + // definition should probably be optional, however, YANG + // requires a unique id for lists + ordered-by user; + description + "Policy statements group conditions and actions + within a policy definition. They are evaluated in + the order specified (see the description of policy + evaluation at the top of this module."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to list key"; + } + + container config { + description + "Configuration data for policy statements"; + + uses policy-statements-config; + } + + container state { + + config false; + + description + "Operational state data for policy statements"; + + uses policy-statements-config; + uses policy-statements-state; + } + + uses policy-conditions-top; + uses policy-actions-top; + } + } + } + + grouping defined-sets-top { + description + "Top-level grouping for defined set definitions"; + + container defined-sets { + description + "Predefined sets of attributes used in policy match + statements"; + + uses generic-defined-sets; + } + } + + grouping policy-definitions-config { + description + "Configuration data for policy definitions"; + + leaf name { + type string; + description + "Name of the top-level policy definition -- this name + is used in references to the current policy"; + } + } + + grouping policy-definitions-state { + description + "Operational state data for policy definitions"; + } + + grouping policy-definitions-top { + description + "Top-level grouping for the policy definition list"; + + container policy-definitions { + description + "Enclosing container for the list of top-level policy + definitions"; + + list policy-definition { + key "name"; + description + "List of top-level policy definitions, keyed by unique + name. These policy definitions are expected to be + referenced (by name) in policy chains specified in import + or export configuration statements."; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for policy defintions"; + + uses policy-definitions-config; + } + + container state { + + config false; + + description + "Operational state data for policy definitions"; + + uses policy-definitions-config; + uses policy-definitions-state; + } + + uses policy-statements-top; + } + } + } + + grouping routing-policy-top { + description + "Top level container for OpenConfig routing policy"; + + container routing-policy { + description + "Top-level container for all routing policy configuration"; + + + uses defined-sets-top; + + uses policy-definitions-top; + } + } + + grouping apply-policy-import-config { + description + "Configuration data for applying import policies"; + + leaf-list import-policy { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:name"; + //TODO: require-instance should be added when it's + //supported in YANG 1.1 + //require-instance true; + } + ordered-by user; + description + "list of policy names in sequence to be applied on + receiving a routing update in the current context, e.g., + for the current peer group, neighbor, address family, + etc."; + } + + leaf default-import-policy { + type default-policy-type; + default REJECT_ROUTE; + description + "explicitly set a default policy if no policy definition + in the import policy chain is satisfied."; + } + + } + + grouping apply-policy-export-config { + description + "Configuration data for applying export policies"; + + leaf-list export-policy { + type leafref { + path "/oc-rpol:routing-policy/oc-rpol:policy-definitions/" + + "oc-rpol:policy-definition/oc-rpol:name"; + //TODO: require-instance should be added when it's + //supported in YANG 1.1 + //require-instance true; + } + ordered-by user; + description + "list of policy names in sequence to be applied on + sending a routing update in the current context, e.g., + for the current peer group, neighbor, address family, + etc."; + } + + leaf default-export-policy { + type default-policy-type; + default REJECT_ROUTE; + description + "explicitly set a default policy if no policy definition + in the export policy chain is satisfied."; + } + } + + + grouping apply-policy-config { + description + "Configuration data for routing policies"; + + uses apply-policy-import-config; + uses apply-policy-export-config; + + } + + + + grouping apply-policy-state { + description + "Operational state associated with routing policy"; + + //TODO: identify additional state data beyond the intended + //policy configuration. + } + + grouping apply-policy-group { + description + "Top level container for routing policy applications. This + grouping is intended to be used in routing models where + needed."; + + container apply-policy { + description + "Anchor point for routing policies in the model. + Import and export policies are with respect to the local + routing table, i.e., export (send) and import (receive), + depending on the context."; + + container config { + description + "Policy configuration data."; + + uses apply-policy-config; + } + + container state { + + config false; + description + "Operational state for routing policy"; + + uses apply-policy-config; + uses apply-policy-state; + } + } + } + + uses routing-policy-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-rsvp-sr-ext.yang b/src/plugins/yang/openconfig/openconfig-rsvp-sr-ext.yang new file mode 100644 index 0000000..f9af96d --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-rsvp-sr-ext.yang @@ -0,0 +1,400 @@ +module openconfig-rsvp-sr-ext { + yang-version "1"; + + namespace "http://openconfig.net/yang/rsvp-sr-ext"; + prefix "oc-sr-rsvp-ext"; + + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-types { prefix "oc-types"; } + import openconfig-network-instance { prefix "oc-ni"; } + + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module adds extensions to the OpenConfig MPLS models to + provide extensions which allow the coexistence of RSVP-TE and + Segment Routing (SR) within the same network. It augments the + existing OpenConfig segment routing (SR) and RSVP-TE models + where required."; + + oc-ext:openconfig-version "0.2.0"; + + revision 2018-04-13 { + description + "Replace boolean with modes for measure-sr-traffic."; + reference "0.2.0"; + } + + revision 2017-03-06 { + description + "Initial revision."; + reference "0.1.0"; + } + + grouping bandwidth-measurement-global-state { + description + "Operational state parameters for bandwidth measurement which + apply globally to the device."; + + leaf effective-adjustment-interval { + type uint32; + units "seconds"; + description + "The effective adjustment interval that is being used by + the system. In the case that the adjustment-interval leaf + is set to a non-integer multiple of the collection-interval, + and the system does not support this, the value of this leaf + should reflect the effective value of the adjustment interval + that it has selected. In the case where no rounding of the + adjustment interval has occurred, this value should have the + same value as the adjustment-inerval leaf."; + } + } + + grouping bandwidth-measurement-global-config { + description + "Configuration parameters for bandwidth measurement which apply + globally to the device."; + + leaf measure-sr-traffic { + type enumeration { + enum MEASURE_ONLY { + description + "Only measure the SR traffic being sent via an interface, + and do not flood it into the IGP."; + } + enum MEASURE_AND_FLOOD { + description + "Measure the SR traffic being sent via an interface and + flood it into the IGP."; + } + } + description + "Parameter enabling SR traffic measurement + and optional flooding into IGP."; + reference + "draft-sitaraman-sr-rsvp-coexistence-rec-01"; + } + + // TODO(robjs): For future extension, traffic accounting for + // non-SR, non-RSVP traffic could be added here. e.g., LDP, + // BGP-LU etc. + + leaf collection-interval { + type uint32; + units "seconds"; + description + "The interval at which the collection of interface + statistics relating to non-RSVP-TE traffic should be + performed"; + reference + "draft-sitaraman-sr-rsvp-coexistence-rec-01"; + } + + leaf adjustment-interval { + type uint32; + units "seconds"; + description + "The interval after which an adjustment to the utilised + bandwidth on the interface is made. This value must be + greater than, or equal to, the collection interval for + statistics. This value is referred to as N in + draft-sitaraman-sr-rsvp-coexistence-rec-01. + + After N seconds have expired, the + arithmetic mean of the samples is taken, and this is + considered as the non-RSVP-TE utilisation of the + interface. In the case that the adjustment interval is + an integer >1 multiple of the collection interval, this + serves to provide smoothing of the collected bandwidth + statistics."; + reference + "draft-sitaraman-sr-rsvp-coexistence-rec-01"; + } + + leaf bandwidth-multiplier { + type decimal64 { + fraction-digits 4; + } + default 1.0000; + description + "A multiplier applied to the sampled bandwidth which + determines the value that is propagated to the IGP TED. + By default this value is 1.0000, and hence the actual + sampled value is flooded."; + } + } + + grouping bandwidth-measurement-update-config { + description + "Configuration parameters related to when the bandwidth + measurement information is used to update the IGP TED."; + + leaf update-trigger { + type enumeration { + enum ADJUSTED_MAX_RESERVABLE_PCT { + description + "Update of a new maximum reservable bandwidth IGP + TLV is based on the value changing >= X% of + the currently flooded adjusted-absolute-subscription-bw. + The percentage of this value that is used is specified + by the adjusted-max-reservable-bw-pct leaf."; + } + enum SR_TRAFFIC_PCT { + description + "Update of the new maximum reservable bandwidth IGP + TLV is based on the value changing >= X% of the last + calculated segment routing traffic utilisation for the + interface. The percentage delta of this value is + specified by the sr-traffic-pct leaf."; + } + } + description + "The trigger that should be used to determine when the IGP + TED is updated with new information as to the effective + maximum reservable bandwidth + (adjusted-absolute-subscription-bw)"; + } + + leaf adjusted-max-reservable-bw-pct { + when "../update-trigger = 'ADJUSTED_MAX_RESERVABLE_PCT'" { + description + "Only allow the adjusted-max-reservable-bw update trigger + to be specified when the update-trigger mode is specified + to be a percentage of the currently flooded value."; + } + type oc-types:percentage; + description + "The delta in the adjusted-max-reservable-bandwidth that + should trigger an update in the value which is flooded + through the IGP TED. + The delta is measured as a percentage of the + current adjusted value of the maximum reservable bandwidth + of the interface, as specified by the + adjusted-absolute-subscription-bw RSVP-TE leaf."; + reference + "draft-sitaraman-sr-rsvp-coexistence-rec-01"; + } + + leaf sr-traffic-pct { + when "../update-trigger = 'SR_TRAFFIC_PCT'" { + description + "Only allow the SR traffic percentage trigger to be + specified when the update trigger is defined to be a + percentage of the last calculated SR traffic value."; + } + type oc-types:percentage; + description + "The change in the calculated SR traffic on the interface + that should trigger an update in the value of the + maximum reservable bandwidth flooded through the IGP TED. + The value is specified as a percentage of the + last-calculated-sr-traffic state leaf."; + } + } + + grouping bandwidth-measurement-global-structural { + description + "Structural grouping for the measurement of segment routing + traffic, and its advertisement into the IGP TED."; + + container bandwidth-measurement { + description + "Configuration and operational state parameters related to + how bandwidth utilisation is measured and flooded into the + IGP."; + + container config { + description + "Configuration parameters relating to bandwidth + measurement."; + + uses bandwidth-measurement-global-config; + } + + container state { + config false; + description + "Operational state parameters relating to bandwidth + measurement"; + + uses bandwidth-measurement-global-config; + uses bandwidth-measurement-global-state; + } + + container update-trigger { + description + "Configuration and operational state parameters related + to the update trigger for flooding new bandwidth + information into the IGP."; + + container config { + description + "Configuration parameters related to the bandwidth + measurement update trigger."; + + uses bandwidth-measurement-update-config; + } + + container state { + config false; + description + "Operational state parameters related to the bandwidth + measurement update trigger."; + + uses bandwidth-measurement-update-config; + } + } + } + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:mpls/oc-ni:te-global-attributes" { + description + "Add the bandwidth measurement parameters to MPLS global + traffic engineering hierarchy."; + + uses bandwidth-measurement-global-structural; + } + + grouping bandwidth-measurement-rsvp-te-adjusted-state { + description + "Logical grouping augmented into the RSVP-TE hierarchy to + provide an operational state value which reflects the + adjusted RSVP-TE available bandwidth."; + + leaf adjusted-absolute-subscription-bw { + type uint64; + units "kbps"; + description + "The adjusted absolute value (in kbps) of the + bandwidth which is reservable to RSVP-TE on the + local system. In the case that the bandwidth-measurement + configuration does not account for non-RSVP-TE traffic + then this value is equal to the + calculated-absolute-subscription-bw, in the case that + non-RSVP-TE traffic is being accounted for, it is lower + such that calculated-absolute-subscription-bw - + adjusted-absolute-subscription-bw = the current calculated + non-RSVP-TE traffic. + + This value reflects the last flooded value of the maximum + reservable bandwidth, or subscription."; + } + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/" + + "oc-ni:mpls/oc-ni:signaling-protocols/oc-ni:rsvp-te/" + + "oc-ni:interface-attributes/oc-ni:interface/" + + "oc-ni:subscription/oc-ni:state" { + + description + "Augmentation to add the adjusted RSVP-TE available bandwidth + state to the RSVP-TE signaling protocol."; + + uses bandwidth-measurement-rsvp-te-adjusted-state; + } + + grouping bandwidth-measurement-intf-structural { + description + "Structural grouping containing interface bandwidth + measurement configuration and operational state + parameters."; + + container bandwidth-measurement { + description + "Configuration and operational state parameters relating to + per-interface bandwidth measurement. These parameters are + used in the case that RSVP-TE coexists with other MPLS + signaling protocols on an interface."; + + container state { + config false; + description + "Operational state parameters relating to the containing + interface's bandwidth measurement."; + + uses bandwidth-measurement-intf-state; + } + } + } + + grouping bandwidth-measurement-intf-state { + description + "Operational state parameters per-interface for the measured + bandwidth on an interface"; + + leaf last-sample-time { + type oc-types:timeticks64; + description + "The time at which the last sample of bandwidth utilisation + for both RSVP-TE and non-RSVP-TE traffic was taken. This value + is represented in nanoseconds since the Unix epoch."; + } + + leaf last-sample-measured-rsvp-util { + type uint64; + units "kbps"; + description + "The measured RSVP-TE bandwidth utilisation at the last sample + (whose time is indicated in last-sample-time). This value is + expressed as a 64-bit unsigned integer representing the number + of kilobits per second that RSVP-TE traffic is consuming on + the interface."; + } + + leaf last-sample-measured-sr-util { + type uint64; + units "kbps"; + description + "The measured Segment Routing bandwidth utilisation at the + last sample (whose time is indicated in last-sample-time). + This value is expressed as a 64-bit unsigned integer + representing the number of kilobits per second that Segment + Routing traffic is consuming on the interface."; + } + + leaf last-calculated-time { + type oc-types:timeticks64; + description + "The time at which the last calculated value for bandwidth + utilisation was performed."; + } + + leaf last-calculated-sr-utilisation { + type uint64; + description + "The last calculated value of the Segment Routing utilisation + (taken post any averaging or adjustment that occurs). This + value is updated regardless of whether the value was flooded + or not."; + } + + leaf last-flooded-time { + type oc-types:timeticks64; + description + "The time, expressed in nanoseconds since the epoch, at which + the bandwidth utilisation of non-RSVP-TE traffic resulted in + the value being flooded in the IGP. If the configuration of the + local system specifies a 0% change requires flooding, this leaf + will always reflect the value of the last-calculated-time. In + systems that have suppression due to a >0% delta being required + then it indicates the last time that the percentage threshold + was exceeded."; + } + } + + augment "/oc-ni:network-instances/oc-ni:network-instance/oc-ni:mpls" + + "/oc-ni:te-interface-attributes/oc-ni:interface" { + description + "Augment the per-interface bandwidth measurement parameters into the + MPLS hierarchy of network instance."; + + uses bandwidth-measurement-intf-structural; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-segment-routing.yang b/src/plugins/yang/openconfig/openconfig-segment-routing.yang new file mode 100644 index 0000000..f19b2d8 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-segment-routing.yang @@ -0,0 +1,780 @@ +module openconfig-segment-routing { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/sr"; + prefix "oc-sr"; + + // import some basic types + import openconfig-extensions { prefix "oc-ext"; } + import openconfig-mpls-types { prefix "oc-mpls-t"; } + import openconfig-interfaces { prefix "oc-if"; } + import ietf-inet-types { prefix "inet"; } + import ietf-yang-types { prefix "yang"; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Configuration and operational state parameters relating to the + segment routing. This module defines a number of elements which are + instantiated in multiple places throughout the OpenConfig collection + of models. + + Particularly: + - SRGB+LB dataplane instances - directly instantied by SR. + - SRGB+LB dataplane reservations - instantiated within MPLS and future SR + dataplanes. + - SR SID advertisements - instantiated within the relevant IGP. + - SR-specific counters - instantied within the relevant dataplane."; + + oc-ext:openconfig-version "0.0.3"; + + revision "2017-01-12" { + description + "Minor compliance fixes."; + reference "0.0.3"; + } + + revision "2016-12-15" { + description + "Updated revision of SR module."; + reference "0.0.2"; + } + + revision "2016-07-28" { + description + "Initial revision of SR module."; + reference "0.0.1"; + } + + typedef sr-dataplane-type { + type enumeration { + enum MPLS { + description + "The entity uses MPLS labels as Segment Identifiers."; + } + enum IPV6 { + description + "The entity uses IPv6 prefixes as Segment Identifiers."; + } + } + description + "Types of data plane that can be used to instantiate a Segment + Routing block of SIDs."; + } + + typedef sr-sid-type { + type union { + type oc-mpls-t:mpls-label; + type inet:ipv6-address-no-zone; + } + description + "The defined value of a segment identifier."; + } + + grouping srgb-config { + description + "Configuration parameters relating to the SRGB."; + + leaf local-id { + type string; + description + "Unique identifier for the segment routing global block on + the local system."; + } + + leaf dataplane-type { + type sr-dataplane-type; + description + "The dataplane being used to instantiate the SRGB. When MPLS is specified + the set of MPLS label blocks that are defined in the mpls-label-blocks + list are used to make up the SRGB. When IPv6 is specified, the set of IPv6 + prefixes specified in the ipv6-prefixes list are used."; + } + + leaf-list mpls-label-blocks { + when "../dataplane-type = 'MPLS'" { + description + "Allow the MPLS label block to be specified only for SRGBs that are + using the MPLS dataplane."; + } + type leafref { + // We are at /network-instances/network-instance/segment-routing/ + // srgbs/srgb/config/mpls-label-blocks + path "../../../../../mpls/global/reserved-label-blocks/" + + "reserved-label-block/config/local-id"; + } + description + "A list of refences to the label blocks that are used to make + up the SRGB."; + } + + leaf-list ipv6-prefixes { + when "../dataplane-type = 'IPV6'" { + description + "Allow IPv6 prefixes to be specified only when the dataplane + realisation of the SRGB is IPv6."; + } + type inet:ipv6-prefix; + description + "A list of IPv6 prefixes which are to be used for segment routing using + the IPv6 dataplane."; + } + } + + grouping srgb-state { + description + "Operational state parameters relating to the SRGB."; + + leaf size { + type uint32; + description + "The total number of SRGB entries that are available within the SRGB."; + } + + leaf used { + type uint32; + description + "The total number of SRGB entries that have already been alocated by + protocols referencing the SRGB."; + } + } + + grouping srlb-config { + description + "Configuration parameters relating to an SRLB."; + + leaf local-id { + type string; + description + "A unique local identifier used for the Segment Routing Local Block. + The identifier is used when referencing the SRLB within other + contexts."; + } + + leaf dataplane-type { + type sr-dataplane-type; + description + "The dataplane that is to be used for the Segment Routing Local Block. + When MPLS is specified, the local block corresponds to a block of MPLS + labels; when IPv6 is specified it corresponds to an IPv6 prefix."; + } + + leaf mpls-label-block { + when "../dataplane-type = 'MPLS'" { + description + "Allow the MPLS label block to be specified only for SRLBs that are + using the MPLS dataplane."; + } + type leafref { + path "../../../../../mpls/global/reserved-label-blocks/" + + "reserved-label-block/config/local-id"; + } + description + "A reference to the MPLS label block that is used to contain the + SIDs of the SRLB."; + } + + leaf ipv6-prefix { + when "../dataplane-type = 'IPV6'" { + description + "Allow IPv6 prefixes to be specified only when the dataplane + realisation of the SRGB is IPv6."; + } + type inet:ipv6-prefix; + description + "The IPv6 prefix that is used for the SRLB."; + } + } + + grouping sr-structural { + description + "Top-level structural grouping defining Segment Routing Global Blocks."; + + container srgbs { + description + "Configuration and operational state parameters relating to the + SRGBs defined for the system."; + + list srgb { + key "local-id"; + + description + "A single definition of an SRGB which may comprise of multiple + sets of dataplane addresses (IPv6 addresses, or MPLS labels)."; + + leaf local-id { + type leafref { + path "../config/local-id"; + } + description + "A reference to the identifier for the SRGB."; + } + + container config { + description + "Configuration parameters relating to the SRGB."; + uses srgb-config; + } + + container state { + config false; + description + "State parameters relating to the SRGB."; + uses srgb-config; + uses srgb-state; + } + } + } + + container srlbs { + description + "Configuration and operational state parameters relating to the + Segment Routing Local Blocks (SRLBs) defined for the system."; + + list srlb { + key "local-id"; + + description + "A definition of a Segment Routing Local Block, defined to be + a set of Segment Identifiers (specified as MPLS labels or + IPv6 addreses) that are defined for local allocation by the + system. A block may optionally be advertised into an IGP."; + + leaf local-id { + type leafref { + path "../config/local-id"; + } + description + "Reference to the local identifier used for the SRLB."; + } + + container config { + description + "Configuration parameters relating to the SRLB."; + uses srlb-config; + } + + container state { + config false; + description + "Operational state parmeters relating to the SRLB."; + uses srlb-config; + } + } + } + } + + grouping sr-mpls-top { + description + "Structural grouping defining SR definition within MPLS."; + + container segment-routing { + description + "MPLS-specific Segment Routing configuration and operational state + parameters"; + + container aggregate-sid-counters { + description + "Per-SID counters aggregated across all interfaces on the local system"; + + list aggregate-sid-counter { + key "mpls-label"; + config false; + + description + "Counters aggregated across all of the interfaces of the local + system corresponding to traffic received or forwarded with a + particular SID"; + + leaf mpls-label { + type leafref { + path "../state/mpls-label"; + } + description + "The MPLS label representing the segment identifier"; + } + + container state { + config false; + description + "State parameters for per-SID statistics"; + uses sr-mpls-sid-counters-state; + uses sr-mpls-common-counters; + } + } + } + + container interfaces { + description + "Interface related Segment Routing parameters."; + + list interface { + key "interface-id"; + + description + "Parameters and MPLS-specific configuration relating to Segment + Routing on an interface."; + + leaf interface-id { + type leafref { + path "../config/interface-id"; + } + description + "A reference to the ID for the interface for which SR is + configured"; + } + + container config { + description + "MPLS-specific Segment Routing configuration parameters + related to an interface."; + uses sr-mpls-interface-config; + } + + container state { + config false; + description + "MPLS-specific Segment Routing operational state parameters + related to an interface."; + uses sr-mpls-interface-config; + uses sr-mpls-interface-state; + } + + container sid-counters { + description + "Per-SID statistics for MPLS"; + + list sid-counter { + key "mpls-label"; + config false; + + description + "Per segment identifier counters for the MPLS dataplane."; + + leaf mpls-label { + type leafref { + path "../state/mpls-label"; + } + description + "The MPLS label representing the segment identifier"; + } + + container state { + config false; + description + "State parameters for per-SID statistics"; + uses sr-mpls-sid-counters-state; + uses sr-mpls-common-counters; + } + + container forwarding-classes { + description + "Per-SID per-forwarding class counters for Segment Routing."; + + list forwarding-class { + key "exp"; + config false; + + description + "SID entries for the forwarding class associated with the + referenced MPLS EXP."; + + leaf exp { + type leafref { + path "../state/exp"; + } + description + "Reference to the value of the EXP bits of the segment + identifier."; + } + + container state { + config false; + description + "Per-SID, per forwarding class counters for Segment Routing + with the MPLS dataplane"; + + uses sr-mpls-interface-sid-fc-state; + uses sr-mpls-common-counters; + } + } + } + } + } + uses oc-if:interface-ref; + } + } + } + } + + grouping sr-mpls-interface-config { + description + "MPLS-specific Segment Routing configuration for an interface"; + + leaf interface-id { + type string; + description + "A unique identifier for the interface."; + } + } + + grouping sr-mpls-interface-state { + description + "MPLS-specific Segment Routing operational state parameters for an + interface"; + + uses sr-mpls-common-counters; + } + + grouping sr-mpls-interface-sid-fc-state { + description + "Per-SID per forwarding class statistics for SR with the MPLS dataplane"; + + leaf exp { + type uint8 { + range "0..7"; + } + description + "The value of the MPLS EXP (experimental) or Traffic Class bits that the + SID statistics relate to. Packets received with a MPLS label value + equal to the SID's MPLS label and EXP bits equal to the this value + should be counted towards the associated ingress statistics. Packets + that are forwarded to the destination MPLS label corresponding to the + SID should be counted towards this value. In the egress direction, where + forwarding follows a SID value that requires PHP at the local node, + packets should still be counted towards the egress counters."; + } + } + + grouping sr-mpls-sid-counters-state { + description + "Per-SID statistics leaves"; + + leaf mpls-label { + type oc-mpls-t:mpls-label; + description + "The MPLS label used for the segment identifier"; + } + } + + grouping sr-mpls-common-counters { + description + "Per segment identifier counters used in the model"; + + leaf in-pkts { + type yang:counter64; + description + "A cumulative counter of the packets received within the context + which have matched a label corresponding to an SR Segment Identifier."; + } + + leaf in-octets { + type yang:counter64; + description + "The cumulative counter of the total bytes received within the context + which have matched a label corresponding to an SR Segment Identifier"; + } + + leaf out-pkts { + type yang:counter64; + description + "A cumulative counter of the total number of packets transmitted by + the local system within the context which have a label imposed that + corresponds to an Segment Identifier."; + } + + leaf out-octets { + type yang:counter64; + description + "A cumulative counter of the total bytes transmitted by the local + system within the context which have a label imported that + corresponds to an SR Segment Identifier."; + } + } + + grouping sr-igp-config { + description + "Configuration parameters relating to segment routing within an + IGP."; + + leaf enabled { + type boolean; + description + "When this leaf is set to true, the segment routing extensions are + utilised within the IGP."; + } + + leaf srgb { + type leafref { + path "../../../../../../../segment-routing/srgbs/srgb/config/local-id"; + } + description + "A reference to the Segment Routing Global Block (SRGB) that is + to be used by this IGP instance."; + } + + leaf srlb { + // Leaf is defined at + // /network-instances/network-instance/protocols/protocol//global/ + // segment-routing/config + type leafref { + path "../../../../../../../segment-routing/srlbs/srlb/config/local-id"; + } + description + "A reference to the Segment Routing Local Block (SRLB) that is to + be advertised by the IGP instance."; + } + } + + grouping sr-igp-top { + description + "Per-instance configuration and state parameters for Segment Routing + in an IGP."; + + container segment-routing { + description + "Configuration and operational state relating to segment routing."; + + container config { + description + "Configuration parameters relating to the configuration of segment + routing for the IGP instance."; + uses sr-igp-config; + } + + container state { + config false; + description + "Operational state parameters relating to segment routing for the + IGP instance."; + uses sr-igp-config; + } + } + } + + grouping sr-igp-interface-prefix-sid-config { + description + "Configuration parameters relating to an IGP prefix SID advertisement"; + + leaf prefix { + type inet:ip-prefix; + description + "The IP prefix for which the IGP prefix SID should be advertised. The + value specified is a local prefix on the interface which is advertised + into the IGP."; + } + + leaf sid-id { + type sr-sid-type; + description + "The Segment Identifier to be used when advertising the IGP Prefix SID."; + } + + leaf label-options { + type enumeration { + enum NO_PHP { + description + "When this value is specified, the penultimate hop must not pop + the Prefix-SID label before forwarding it to the local system."; + } + enum EXPLICIT_NULL { + description + "When set, the penultimate hop must swap the prefix SID for the + relevant explicit null label before forwarding the packet."; + } + } + description + "The options associated with the IGP prefix SID for MPLS. The value + of this leaf specifies the option that the SID should be advertised + into the IGP with."; + } + } + + grouping sr-igp-interface-adjsid-config { + description + "Configuration parameters relating to an Adj-SID on an interface"; + + leaf sid-id { + type union { + type sr-sid-type; + type enumeration { + enum DYNAMIC { + description + "The SID chosen for the Adjacency SID should be dynamically + allocated from the system's dynamic range of Segment + Identifiers. For MPLS, this range should be considered to be + those labels that do not fall within a reserved label block."; + } + } + } + description + "The value of the Adj-SID to be advertised. Where a static SID + identifier is specified, this should be advertised directly by the + system. Where the DYNAMIC value is specified, this should be treated + as a dynamically allocated value. When the MPLS data plane is in use + the dynamic value should not fall within a reserved-label-block."; + } + + leaf protection-eligible { + type boolean; + default true; + description + "Whether the Adj-SID should be considered to be eligible for protection + using IP or MPLS FRR during a network failure. When this value is set to + true, the B-flag of the Adj-SID is set to 1, and the local system should + provide FRR paths for the associated label forwarding entry. When it is + set to false, the local system must not provide FRR for the specified + LFIB entry."; + } + + leaf group { + type boolean; + default false; + description + "When set to true, the Adj-SID is indicated to be part of a group, and + the G flag is set to 1 in the corresponding advertisement in the IGP."; + } + + leaf neighbor { + type inet:ip-address; + description + "The remote system on the interface with which the Adj-SID is + associated."; + } + } + + grouping sr-igp-interface-adjsid-state { + description + "Operational state parameters relating to the adjacency SID for an + interface"; + + leaf allocated-dynamic-local { + type sr-sid-type; + description + "Where an Adjacency SID with a dynamic value is to be allocated by + the system, this leaf reports to the value of the Adj-SID allocated + to this interface."; + } + } + + grouping sr-igp-interface-top { + description + "Per-interface configuration and operational state relating to an + interface within the IGP."; + + container segment-routing { + description + "Configuration and operatioanl state parameters relating to segment + routing for an interface within the IGP."; + + container prefix-sids { + description + "Configuration and operational state parameters relating to + the advertisement of a segment routing IGP-Prefix SID for this + interface."; + + list prefix-sid { + key "prefix"; + + description + "An IGP prefix that should have a segment routing IGP-Prefix SID + allocated to it. The value of the SID is specified by the SID ID, + as an absolute value. If the absolute value falls within the SRGB, + the Global flag should be advertised by the system."; + + leaf prefix { + type leafref { + path "../config/prefix"; + } + description + "Reference to the prefix for which the IGP-Prefix SID is to be + advertised"; + } + + container config { + description + "Configuration parameters for the IGP Prefix SID."; + uses sr-igp-interface-prefix-sid-config; + } + + container state { + config false; + description + "Operational state parameters for the IGP-Prefix SID."; + uses sr-igp-interface-prefix-sid-config; + } + } + } + + container adjacency-sids { + description + "Configuration and operational state parameters relating to + the advertisement of a segment routing adjacency SID for this + interface."; + + list adjacency-sid { + key "neighbor sid-id"; + + description + "An Adjacency SID to be advertised for the specified interface. + The Adj-SID's identifier (the SID ID) must be unique, with flags + specified indicating the parameters that should be set for the SID. + Where a SID value is specified that is allocated from the SRGB, the + global flag must be set by the system."; + + leaf sid-id { + type leafref { + path "../config/sid-id"; + } + description + "Reference to the segment identifier to be used by the local + system."; + } + + leaf neighbor { + type leafref { + path "../config/neighbor"; + } + description + "Reference to the neighbor with which the Adjacency SID is + associated."; + } + + container config { + description + "Configuraton parameters relating to the AdjSID."; + uses sr-igp-interface-adjsid-config; + } + + container state { + config false; + description + "Operational state parameters relating to the AdjSID."; + uses sr-igp-interface-adjsid-config; + uses sr-igp-interface-adjsid-state; + } + } + } + } + } + + grouping sr-top { + description + "Top level grouping for Segment Routing"; + + container segment-routing { + description + "Configuration and operational state parameters relating to + segment routing."; + + uses sr-structural; + } + } +} diff --git a/src/plugins/yang/openconfig/openconfig-spanning-tree-types.yang b/src/plugins/yang/openconfig/openconfig-spanning-tree-types.yang new file mode 100644 index 0000000..0ca9571 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-spanning-tree-types.yang @@ -0,0 +1,225 @@ +module openconfig-spanning-tree-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/spanning-tree/types"; + + prefix "oc-stp-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines types related to the + spanning-tree protocol model."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2017-07-14" { + description + "Migrated to OpenConfig types; fixed missing applied state + in rapid-pvst"; + reference "0.2.0"; + } + + revision "2016-10-03" { + description + "Initial public revision"; + reference "0.1.0"; + } + + // identity statements + + identity STP_PROTOCOL { + description + "base identity for support spanning tree protocol"; + } + + identity RSTP { + base STP_PROTOCOL; + description + "Rapid Spanning Tree Protocol"; + reference "IEEE 802.1D 17"; + } + + identity MSTP { + base STP_PROTOCOL; + description + "Multiple Spanning Tree Protocol"; + reference "IEEE 802.1Q 13"; + } + + identity RAPID_PVST { + base STP_PROTOCOL; + description + "Rapid Per Vlan Spanning Tree Protocol"; + } + + identity STP_PORT_STATE { + description + "base identity for the different Spanning Tree Protocol port + states"; + reference + "IEEE 802.1D 7.4 Port States and the active topology"; + } + + identity DISABLED { + base STP_PORT_STATE; + description + "A port that is manually isolated from the network"; + } + + identity LISTENING { + base STP_PORT_STATE; + description + "Processing BPDUs and building active toplogy"; + } + + identity LEARNING { + base STP_PORT_STATE; + description + "Building bridging tables; no forwarding of data"; + } + + identity BLOCKING { + base STP_PORT_STATE; + description + "A port that would cause a loop if it were sending data, + so it is only receiving BPDUs, untill a topology change + removes the possibliity of a loop"; + } + + identity FORWARDING { + base STP_PORT_STATE; + description + "Sending and receiving data, normal operation"; + } + + identity STP_EDGE_PORT { + description + "base identity for the different edge port modes"; + reference + "IEEE 802.1D 17.13.1"; + } + + identity EDGE_ENABLE { + base STP_EDGE_PORT; + description + "Enable edge port for the bridge port"; + } + + identity EDGE_DISABLE { + base STP_EDGE_PORT; + description + "Disable edge port for the bridge port"; + } + + identity EDGE_AUTO { + base STP_EDGE_PORT; + description + "Enable edge port autodetction for the bridge port"; + } + + identity STP_PORT_ROLE { + description + "Base identity for the different Spanning Tree Protocol port + roles"; + reference + "IEEE 802.1D 17.7 Port Role assignments"; + } + + identity ROOT { + base STP_PORT_ROLE; + description + "The port that receives the best BPDU on a bridge is the + root port"; + } + + identity DESIGNATED { + base STP_PORT_ROLE; + description + "A port is designated if it can send the best BPDU on the + segment to which it is connected."; + } + + identity ALTERNATE { + base STP_PORT_ROLE; + description + "An alternate port receives more useful BPDUs from another + bridge and is a port blocked"; + } + + identity BACKUP { + base STP_PORT_ROLE; + description + "A backup port receives more useful BPDUs from the same + bridge it is on and is a port blocked"; + } + + // typedef statements + + typedef stp-bridge-priority-type { + type uint32 { + range 1..611440; + } + description + "The manageable component of the Bridge Identifier"; + reference "IEEE 802.1D 17.13.7 Bridge Identifier Priority"; + } + + typedef stp-port-priority-type { + type uint8 { + range 1..240; + } + description + "The manageable component of the Port Identifier, + also known as the Port Priority"; + reference + "IEEE 802.1D 17.13.10 Port Identifier Priority"; + } + + typedef stp-guard-type { + type enumeration { + enum ROOT { + description + "Enable root guard"; + } + enum LOOP { + description + "Enable loop guard"; + } + enum NONE { + description + "disable guard"; + } + } + description + "Type definition for the different STP guard for the switch port"; + reference "IEEE 802.1D 17.2"; + } + + typedef stp-link-type { + type enumeration { + enum P2P { + description + "Point-to-Point link"; + } + enum SHARED { + description + "Shared link"; + } + } + description + "Type definition for the different link types"; + reference "IEEE 802.1D 17.2"; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-spanning-tree.yang b/src/plugins/yang/openconfig/openconfig-spanning-tree.yang new file mode 100644 index 0000000..3a70d5e --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-spanning-tree.yang @@ -0,0 +1,823 @@ +module openconfig-spanning-tree { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/spanning-tree"; + + prefix "oc-stp"; + + import openconfig-spanning-tree-types { prefix oc-stp-types; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-types { prefix oc-types; } + import openconfig-vlan-types { prefix oc-vlan-types; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + for the spanning tree protocol."; + + oc-ext:openconfig-version "0.2.0"; + + revision "2017-07-14" { + description + "Migrated to OpenConfig types; fixed missing applied state + in rapid-pvst"; + reference "0.2.0"; + } + + revision "2016-10-03" { + description + "Initial public revision"; + reference "0.1.0"; + } + + + // identity statements + + + // grouping statements + + grouping stp-interfaces-state { + description + "Grouping of STP operational data for bridge port"; + + leaf port-num { + type uint16; + description + "The port number of the bridge port"; + reference "RFC4188 BRIDGE-MIB dot1dStpPort"; + } + + leaf role { + type identityref { + base oc-stp-types:STP_PORT_ROLE; + } + description + "The current role of the bridge port"; + reference + "IEEE8021-MSTP-MIB ieee8021MstpPortRole"; + } + + leaf port-state { + type identityref { + base oc-stp-types:STP_PORT_STATE; + } + description + "The current state of the bridge port"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortState"; + } + + leaf designated-root-priority { + type oc-stp-types:stp-bridge-priority-type; + description + "The bridge priority of the bridge recorded as the + root in the configuration BPDUs transmitted by the designated + bridge for the segment to which the port is attached"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedRoot"; + } + + leaf designated-root-address { + type oc-yang:mac-address; + description + "The bridge address of the bridge recorded as the + root in the configuration BPDUs transmitted by the designated + bridge for the segment to which the port is attached"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedRoot"; + } + + leaf designated-cost { + type uint32; + description + "The path cost of the Designated Port of the + segment connected to this port"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedCost"; + } + + leaf designated-bridge-priority { + type oc-stp-types:stp-bridge-priority-type; + description + "The bridge priority of the bridge that this port considers + to be the designated bridge for this port's segment."; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedBridge"; + } + + leaf designated-bridge-address { + type oc-yang:mac-address; + description + "The bridge address of the bridge that this port considers + to be the designated bridge for this port's segment."; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedBridge"; + } + + leaf designated-port-priority { + type oc-stp-types:stp-port-priority-type; + description + "The Port priority of the port on the Designated + Bridge for this port's segment, two octet string"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedPort"; + } + + leaf designated-port-num { + type uint16; + description + "The Port number of the port on the Designated + Bridge for this port's segment, two octet string"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortDesignatedPort"; + } + + leaf forward-transisitions { + type oc-yang:counter64; + description + "The number of times this port has transitioned + from the Learning state to the Forwarding state"; + reference "RFC4188 BRIDGE-MIB dot1dStpPortForwardTransitions"; + } + + container counters { + description + "The BPDU packet transmition statistics"; + + leaf bpdu-sent { + type oc-yang:counter64; + description + "The number of BPDU packet sent"; + } + + leaf bpdu-received { + type oc-yang:counter64; + description + "The number of BPDU packet received"; + } + } + } + + grouping stp-interfaces-config { + description + "Grouping of STP configuration for bridge port"; + + leaf name { + type oc-if:base-interface-ref; + description + "Reference to the STP ethernet interface"; + } + + leaf cost { + type uint32 { + range 1..200000000; + } + description + "The port's contribution, when it is the Root Port, + to the Root Path Cost for the Bridge"; + reference + "IEEE 802.1D 17.13.11 PortPathCost"; + } + + leaf port-priority { + type oc-stp-types:stp-port-priority-type; + description + "The manageable component of the Port Identifier, + also known as the Port Priority"; + reference + "IEEE 802.1D 17.13.10 Port Identifier Priority"; + } + } + + grouping stp-interfaces-top { + description + "Grouping of STP configuration and operation data for + bridge port"; + + container interfaces { + description + "Enclosing container for the list of interface references"; + + list interface { + key "name"; + description + "List of interfaces on which STP is enable"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for STP on each interface"; + + uses stp-interfaces-config; + } + + container state { + + config false; + + description + "Operational state data for STP on each interface"; + + uses stp-interfaces-config; + uses stp-interfaces-state; + } + } + } + } + + grouping bridge-priority-config { + description + "Grouping for bridge priority"; + + leaf bridge-priority { + type oc-stp-types:stp-bridge-priority-type; + description + "The manageable component of the Bridge Identifier"; + reference + "IEEE 802.1D 17.13.7 Bridge Identifier Priority"; + } + } + + grouping stp-common-state { + description + "Grouping for common STP operation data"; + + leaf bridge-address { + type oc-yang:mac-address; + description + "A unique 48-bit Universally Administered MAC Address + assigned to the bridge"; + reference + "IEEE 802.1D 7.12.5 Unique identification of a bridge"; + } + + leaf designated-root-priority { + type oc-stp-types:stp-bridge-priority-type; + description + "The bridge priority of the root of the spanning + tree, as determined by the Spanning Tree Protocol, + as executed by this node"; + reference + "RFC4188 BRIDGE-MIB dot1dStpDesignatedRoot"; + } + + leaf designated-root-address { + type oc-yang:mac-address; + description + "The bridge address of the root of the spanning + tree, as determined by the Spanning Tree Protocol, + as executed by this node"; + reference + "RFC4188 BRIDGE-MIB dot1dStpDesignatedRoot"; + } + + leaf root-port { + type uint16; + description + "The port number of the port which offers the lowest + cost path from this bridge to the root bridge"; + reference + "RFC4188 BRIDGE-MIB dot1dStpRootPort"; + } + + leaf root-cost { + type uint32; + description + "The cost of the path to the root as seen from this bridge"; + reference + "RFC4188 BRIDGE-MIB dot1dStpRootCost"; + } + + leaf hold-time { + type uint8; + description + "This time value determines the interval length + during which no more than two Configuration bridge + PDUs shall be transmitted by this node"; + reference + "RFC4188 BRIDGE-MIB dot1dStpHoldTime"; + } + + leaf topology-changes { + type oc-yang:counter64; + description + "The total number of topology changes detected by + this bridge since the management entity was last + reset or initialized"; + reference + "RFC4188 BRIDGE-MIB dot1dStpTopChanges"; + } + + leaf time-since-topology-change { + type oc-types:timeticks64; + description + "The time (in hundredths of a second) since the + last time a topology change was detected by the + bridge entity + + The value is the timestamp in seconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + reference + "RFC4188 BRIDGE-MIB dot1dStpTimeSinceTopologyChange"; + } + } + + grouping stp-timer-config { + description + "Grouping for common STP parameters"; + + leaf hello-time { + type uint8 { + range 1..10; + } + units "seconds"; + description + "The interval between periodic transmissions of + configuration messages by designated ports"; + reference + "IEEE 802.1D 17.13.6 Bridge Hello Time"; + } + + leaf max-age { + type uint8 { + range 6..40; + } + units "seconds"; + description + "The maximum age of the information transmitted by the + bridge when it is the root bridge"; + reference + "IEEE 802.1D 17.13.8 Bridge Max Age"; + } + + leaf forwarding-delay { + type uint8 { + range 4..30; + } + units "seconds"; + description + "The delay used by STP bridges to transition root and + designated ports to forwarding"; + reference + "IEEE 802.1D 17.13.5 Bridge Forward Delay"; + } + + leaf hold-count { + type uint8 { + range 1..10; + } + default 6; + description + "the maximum number of BPDUs per second that the + switch can send from an interface"; + reference + "IEEE 802.1D 17.13.12 Transmit Hold Count"; + } + } + + grouping stp-rapid-pvst-config { + description + "Configuration parameters relating to rapid PVST"; + + leaf vlan-id { + type oc-vlan-types:vlan-id; + description + "Interface VLAN ID"; + } + } + + grouping stp-rapid-pvst-top { + description + "Top grouping for rapid per vlan spanning tree configuration + and operation data"; + + list vlan { + key "vlan-id"; + description + "List of the vlans"; + + leaf vlan-id { + type leafref { + path "../config/vlan-id"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for each vlan"; + + uses stp-rapid-pvst-config; + uses stp-timer-config; + uses bridge-priority-config; + } + + container state { + config false; + description + "Operational data for each vlan"; + + uses stp-rapid-pvst-config; + uses stp-timer-config; + uses bridge-priority-config; + uses stp-common-state; + } + + uses stp-interfaces-top; + } + } + + grouping mst-instance-config { + description + "Grouping for mstp instance configuration"; + + leaf mst-id { + type uint16 { + range "1..4094"; + } + description + "In an MSTP Bridge, an MSTID, i.e., a value used to identify + a spanning tree (or MST) instance."; + reference + "IEEE8021-TC-MIB IEEE8021MstIdentifier"; + } + + leaf-list vlan { + type union { + type oc-vlan-types:vlan-id; + type oc-vlan-types:vlan-range; + } + description + "list of vlans mapped to the MST instance"; + } + } + + grouping mst-instance-top { + description + "Top level grouping for mstp instances"; + + list mst-instance { + key "mst-id"; + description + "List of the mstp instances"; + + leaf mst-id { + type leafref { + path "../config/mst-id"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for MSTP instance"; + + uses mst-instance-config; + uses bridge-priority-config; + } + + container state { + config false; + + description + "Operational data for MSTP instance"; + + uses mst-instance-config; + uses bridge-priority-config; + uses stp-common-state; + } + + uses stp-interfaces-top; + } + } + + grouping mstp-config { + description + "Grouping for MSTP configuration data"; + + leaf name { + type string { + length "1..32"; + } + description + "The Configuration Name in the MST Configuration Identifier"; + reference + "IEEE 802.1Q 13.8 MST Configuration Identifier (MCID)"; + } + + leaf revision { + type uint32; + description + "The Revision Level in the MST Configuration Identifier"; + reference + "IEEE 802.1Q 13.8 MST Configuration Identifier"; + } + + leaf max-hop { + type uint8 { + range 1..255; + } + description + "The max hop determines the number of bridges in an MST + region that a BPDU can traverse before it is discarded"; + reference + "IEEE 802.1Q 13.26.4 BridgeTimes"; + } + + uses stp-timer-config; + } + + grouping mstp-state { + description + "Operational state data for MSTP"; + } + + grouping stp-mstp-top { + description + "Top grouping for MSTP configuration and operation data"; + + container config { + description + "Configuration data for MSTP"; + + uses mstp-config; + } + + container state { + config false; + + description + "Operational data for MSTP"; + + uses mstp-config; + uses mstp-state; + } + + container mst-instances { + description + "Configuration and operation data for MSTP instances"; + + uses mst-instance-top; + } + } + + grouping stp-rstp-top { + description + "Top grouping for RSTP configuration and operation data"; + + container config { + description + "Configuration data for RSTP"; + + uses stp-timer-config; + uses bridge-priority-config; + } + + container state { + config false; + + description + "Operational state data for RSTP"; + + uses stp-timer-config; + uses bridge-priority-config; + uses stp-common-state; + } + + uses stp-interfaces-top; + } + + grouping stp-interface-common-config { + description + "Configuration data for interface specific STP features"; + + leaf name { + type oc-if:base-interface-ref; + description + "Reference to the STP Ethernet interface"; + } + + leaf edge-port { + type identityref { + base oc-stp-types:STP_EDGE_PORT; + } + description + "Configure the edge port state"; + } + + leaf link-type { + type oc-stp-types:stp-link-type; + description + "specifies the interface's link type"; + } + + leaf guard { + type oc-stp-types:stp-guard-type; + description + "Enable root guard or loop guard"; + } + + uses stp-bpdu-config; + + } + + grouping stp-interface-common-state { + description + "Operational state data for STP on interfaces"; + } + + grouping stp-interface-common-top { + description + "Top-level grouping for interface specific STP features"; + + list interface { + key "name"; + description + "List of interfaces on which STP is enable"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the list key"; + } + + container config { + description + "Configuration data for STP on each bridge port"; + + uses stp-interface-common-config; + } + + container state { + + config false; + + description + "Operational state data for STP on each bridge port"; + + uses stp-interface-common-config; + uses stp-interface-common-state; + } + } + } + + grouping stp-bpdu-config { + description + "Grouping for STP BPDU configuration"; + + leaf bpdu-guard { + type boolean; + description + "Enable edge port BPDU guard"; + } + + leaf bpdu-filter { + type boolean; + description + "Enable edge port BPDU filter"; + } + } + + grouping stp-global-config { + description + "Global spanning tree configuration"; + + leaf-list enabled-protocol { + type identityref { + base oc-stp-types:STP_PROTOCOL; + } + description + "List of the spanning tree protocols enabled on the + device"; + } + + leaf bridge-assurance { + type boolean; + description + "Enable bridge assurance to protect against unidirectional + link failure"; + } + + leaf etherchannel-misconfig-guard { + type boolean; + description + "EtherChannel guard detects a misconfigured EtherChannel + when interfaces on the switch are configured as an + EtherChannel while interfaces on the other device are not + or when not all the interfaces on the other device are in + the same EtherChannel."; + } + + leaf bpduguard-timeout-recovery { + type uint8; + units "seconds"; + description + "Amount of time, in seconds, the interface receiving BPDUs + is disabled. Once the timeout expires, the interface is + brought back into service."; + } + + leaf loop-guard { + type boolean; + description + "The loop guard default setting for the bridge"; + } + + uses stp-bpdu-config; + + } + + grouping stp-global-state { + description + "Global operational state for STP"; + } + + grouping stp-global-base { + description + "Grouping for global spanning tree data"; + + container config { + description + "Global spanning tree configuration"; + uses stp-global-config; + } + + container state { + config false; + + description + "Global spanning tree state"; + uses stp-global-config; + uses stp-global-state; + } + } + + grouping stp-top { + description + "Top-level grouping for spanning-tree model"; + + container stp { + description + "Top-level container for spanning tree configuration and + state data"; + + container global { + description + "Global configuration and state data"; + + uses stp-global-base; + } + + container rstp { + + description + "Rapid Spanning-tree protocol configuration and operation + data"; + + uses stp-rstp-top; + } + + container mstp { + description + "Multi Spanning-tree protocol configuration and operation + data"; + + uses stp-mstp-top; + } + + container rapid-pvst { + description + "Rapid per vlan Spanning-tree protocol configuration and + operational data"; + + uses stp-rapid-pvst-top; + } + + container interfaces { + description + "Enclosing container for the list of interface references"; + + uses stp-interface-common-top; + } + } + } + + // data definition statements + + uses stp-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-system-logging.yang b/src/plugins/yang/openconfig/openconfig-system-logging.yang new file mode 100644 index 0000000..14bb1c5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-system-logging.yang @@ -0,0 +1,492 @@ +module openconfig-system-logging { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/system/logging"; + + prefix "oc-log"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + for common logging facilities on network systems."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + identity SYSLOG_FACILITY { + description + "Base identity for Syslog message facilities."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity ALL { + base SYSLOG_FACILITY; + description + "All supported facilities"; + } + + identity KERNEL { + base SYSLOG_FACILITY; + description + "The facility for kernel messages"; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity USER { + base SYSLOG_FACILITY; + description + "The facility for user-level messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity MAIL { + base SYSLOG_FACILITY; + description + "The facility for the mail system."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity SYSTEM_DAEMON { + base SYSLOG_FACILITY; + description + "The facility for the system daemons."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity AUTH { + base SYSLOG_FACILITY; + description + "The facility for security/authorization messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity SYSLOG { + base SYSLOG_FACILITY; + description + "The facility for messages generated internally by syslogd + facility."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity AUTHPRIV { + base SYSLOG_FACILITY; + description + "The facility for privileged security/authorization messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + + identity NTP { + base SYSLOG_FACILITY; + description + "The facility for the NTP subsystem."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity AUDIT { + base SYSLOG_FACILITY; + description + "The facility for log audit messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity CONSOLE { + base SYSLOG_FACILITY; + description + "The facility for log alert messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL0 { + base SYSLOG_FACILITY; + description + "The facility for local use 0 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL1 { + base SYSLOG_FACILITY; + description + "The facility for local use 1 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL2 { + base SYSLOG_FACILITY; + description + "The facility for local use 2 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL3 { + base SYSLOG_FACILITY; + description + "The facility for local use 3 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL4 { + base SYSLOG_FACILITY; + description + "The facility for local use 4 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL5 { + base SYSLOG_FACILITY; + description + "The facility for local use 5 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL6 { + base SYSLOG_FACILITY; + description + "The facility for local use 6 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOCAL7 { + base SYSLOG_FACILITY; + description + "The facility for local use 7 messages."; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + identity LOG_DESTINATION_TYPE { + description + "Base identity for destination for logging messages"; + } + + identity DEST_CONSOLE { + base LOG_DESTINATION_TYPE; + description + "Directs log messages to the console"; + } + + identity DEST_BUFFER { + base LOG_DESTINATION_TYPE; + description + "Directs log messages to and in-memory circular buffer"; + } + + identity DEST_FILE { + base LOG_DESTINATION_TYPE; + description + "Directs log messages to a local file"; + } + + identity DEST_REMOTE { + base LOG_DESTINATION_TYPE; + description + "Directs log messages to a remote syslog server"; + } + + // typedef statements + + typedef syslog-severity { + type enumeration { + enum EMERGENCY { + description + "Emergency: system is unusable (0)"; + } + enum ALERT { + description + "Alert: action must be taken immediately (1)"; + } + enum CRITICAL { + description + "Critical: critical conditions (2)"; + } + enum ERROR { + description + "Error: error conditions (3)"; + } + enum WARNING { + description + "Warning: warning conditions (4)"; + } + enum NOTICE { + description + "Notice: normal but significant condition(5)"; + } + enum INFORMATIONAL { + description + "Informational: informational messages (6)"; + } + enum DEBUG { + description + "Debug: debug-level messages (7)"; + } + } + description + "Syslog message severities"; + reference + "IETF RFC 5424 - The Syslog Protocol"; + } + + // grouping statements + + grouping logging-selectors-config { + description + "Configuration data for logging selectors"; + + leaf facility { + type identityref { + base SYSLOG_FACILITY; + } + description + "Specifies the facility, or class of messages to log"; + } + + leaf severity { + type syslog-severity; + description + "Specifies that only messages of the given severity (or + greater severity) for the corresonding facility are logged"; + } + } + + grouping logging-selectors-state { + description + "Operational state data for logging selectors"; + } + + grouping logging-selectors-top { + description + "Top-level grouping for the logging selector list"; + + container selectors { + description + "Enclosing container "; + + list selector { + key "facility severity"; + description + "List of selectors for log messages"; + + leaf facility { + type leafref { + path "../config/facility"; + } + description + "Reference to facility list key"; + } + + leaf severity { + type leafref { + path "../config/severity"; + } + description + "Reference to severity list key"; + } + + container config { + description + "Configuration data "; + + uses logging-selectors-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses logging-selectors-config; + uses logging-selectors-state; + } + } + } + } + + grouping logging-console-config { + description + "Configuration data for console logging"; + } + + grouping logging-console-state { + description + "Operational state data for console logging"; + } + + grouping logging-console-top { + description + "Top-level grouping for console logging data"; + + container console { + description + "Top-level container for data related to console-based + logging"; + + container config { + description + "Configuration data for console logging"; + + uses logging-console-config; + } + + container state { + + config false; + + description + "Operational state data for console logging"; + + uses logging-console-config; + uses logging-console-state; + } + + uses logging-selectors-top; + } + } + + grouping logging-remote-config { + description + "Configuration data for remote log servers"; + + leaf host { + type oc-inet:host; + description + "IP address or hostname of the remote log server"; + } + + leaf source-address { + type oc-inet:ip-address; + description + "Source IP address for packets to the log server"; + } + + leaf remote-port { + type oc-inet:port-number; + default 514; + description + "Sets the destination port number for syslog UDP messages to + the server. The default for syslog is 514."; + } + } + + grouping logging-remote-state { + description + "Operational state data for remote log servers"; + } + + grouping logging-remote-top { + description + "Top-level grouping for remote log servers"; + + container remote-servers { + description + "Enclosing container for the list of remote log servers"; + + list remote-server { + key "host"; + description + "List of remote log servers"; + + leaf host { + type leafref { + path "../config/host"; + } + description + "Reference to the host list key"; + } + + container config { + description + "Configuration data for remote log servers"; + + uses logging-remote-config; + } + + container state { + + config false; + + description + "Operational state data for remote log servers"; + + uses logging-remote-config; + uses logging-remote-state; + } + uses logging-selectors-top; + } + } + } + + grouping logging-top { + description + "Top-level grouping for logging data"; + + container logging { + description + "Top-level container for data related to logging / syslog"; + + uses logging-console-top; + uses logging-remote-top; + } + } + // data definition statements + + // augment statements + + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-system-management.yang b/src/plugins/yang/openconfig/openconfig-system-management.yang new file mode 100644 index 0000000..67f8aab --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-system-management.yang @@ -0,0 +1,126 @@ +module openconfig-system-management { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/system/management"; + + prefix "oc-sys-mgmt"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + import openconfig-inet-types { prefix oc-inet; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + related to management services."; + + oc-ext:openconfig-version "0.1.1"; + + revision "2018-08-28" { + description + "Update description of the ANY enum."; + reference "0.1.1"; + } + + revision "2018-07-26" { + description + "Initial public release"; + reference "0.1.0"; + } + + // identity statements + + // typedef statements + + // grouping statements + + grouping system-grpc-server-config { + description + "Configuration data for the gRPC server"; + + leaf enable { + type boolean; + default true; + description + "Enables the gRPC server. The gRPC server is enabled by + default"; + } + + leaf port { + type oc-inet:port-number; + description + "TCP port on which the gRPC server should listen"; + } + + leaf transport-security { + type boolean; + description + "Enables gRPC transport security (e.g., TLS or SSL)"; + } + + leaf certificate-id { + type string; + description + "The certificate ID to be used for authentication"; + } + + leaf-list listen-addresses { + type union { + type oc-inet:ip-address; + type enumeration { + enum ANY { + description + "The gRPC daemon should listen on any address + bound to an interface on the system."; + } + } + } + description + "The IP addresses that the gRPC server should listen + on. This may be an IPv4 or an IPv6 address"; + } + } + + grouping system-grpc-server-top { + description + "Top-level grouping for system gRPC server data"; + + container grpc-server { + description + "Top-level container for the gRPC server"; + + container config { + description + "Configuration data for the system gRPC server"; + + uses system-grpc-server-config; + } + + container state { + config false; + + description + "Operational state data for the system gRPC server"; + + uses system-grpc-server-config; + } + } + } + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-system-terminal.yang b/src/plugins/yang/openconfig/openconfig-system-terminal.yang new file mode 100644 index 0000000..dc44dc5 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-system-terminal.yang @@ -0,0 +1,239 @@ +module openconfig-system-terminal { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/system/terminal"; + + prefix "oc-sys-term"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines configuration and operational state data + related to remote terminal services such as ssh and telnet."; + + oc-ext:openconfig-version "0.3.0"; + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // identity statements + + // typedef statements + + // grouping statements + + grouping system-terminal-common-config { + description + "Common configuration data for terminal services"; + + leaf timeout { + type uint16; + units seconds; + description + "Set the idle timeout in seconds on terminal connections to + the system for the protocol."; + } + + leaf rate-limit { + type uint16; + units "conn/min"; + description + "Set a limit on the number of connection attempts per + minute to the system for the protocol."; + } + + leaf session-limit { + type uint16; + description + "Set a limit on the number of simultaneous active terminal + sessions to the system for the protocol (e.g., ssh, + telnet, ...) "; + } + } + + grouping system-terminal-common-state { + description + "Common operational state data for terminal services"; + } + + grouping system-terminal-common-top { + description + "Top-level grouping for common terminal service data"; + + container terminal-servers { + description + "Top-level container for terminal services"; + + container config { + description + "Configuration data for terminal services"; + + uses system-terminal-common-config; + } + + container state { + + config false; + + description + "Operational state data "; + + uses system-terminal-common-config; + uses system-terminal-common-state; + } + } + } + + grouping system-ssh-server-config { + description + "Configuration data for system ssh configuration"; + + leaf enable { + type boolean; + default true; + description + "Enables the ssh server. The ssh server is enabled by + default."; + } + + leaf protocol-version { + type enumeration { + enum V2 { + description + "Use SSH v2 only"; + } + enum V1 { + description + "Use SSH v1 only"; + } + enum V1_V2 { + description + "Use either SSH v1 or v2"; + } + } + default V2; + description + "Set the protocol version for SSH connections to the system"; + } + + uses system-terminal-common-config; + } + + grouping system-ssh-server-state { + description + "Operational state data for ssh server"; + } + + grouping system-ssh-server-top { + description + "Top-level grouping for ssh server data"; + + container ssh-server { + description + "Top-level container for ssh server"; + + container config { + description + "Configuration data for the system ssh server"; + + uses system-ssh-server-config; + } + + container state { + + config false; + + description + "Operational state data for the system ssh server"; + + uses system-ssh-server-config; + uses system-ssh-server-state; + } + } + } + + grouping system-telnet-server-config { + description + "Configuration data for telnet server"; + + leaf enable { + type boolean; + default false; + description + "Enables the telnet server. Telnet is disabled by + default"; + } + uses system-terminal-common-config; + + } + + grouping system-telnet-server-state { + description + "Operational state data for telnet server"; + } + + grouping system-telnet-server-top { + description + "Top-level grouping for telnet server "; + + container telnet-server { + description + "Top-level container for telnet terminal servers"; + + container config { + description + "Configuration data for telnet"; + + uses system-telnet-server-config; + } + + container state { + + config false; + + description + "Operational state data for telnet"; + + uses system-telnet-server-config; + uses system-telnet-server-state; + } + } + } + + // data definition statements + + // augment statements + + // rpc statements + + // notification statements + +} \ No newline at end of file diff --git a/src/plugins/yang/openconfig/openconfig-system.yang b/src/plugins/yang/openconfig/openconfig-system.yang new file mode 100644 index 0000000..f4d4034 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-system.yang @@ -0,0 +1,978 @@ +module openconfig-system { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/system"; + + prefix "oc-sys"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-yang-types { prefix oc-yang; } + import openconfig-types { prefix oc-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-aaa { prefix oc-aaa; } + import openconfig-system-logging { prefix oc-log; } + import openconfig-system-management { prefix oc-sys-mgmt; } + import openconfig-system-terminal { prefix oc-sys-term; } + import openconfig-procmon { prefix oc-proc; } + import openconfig-alarms { prefix oc-alarms; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "Model for managing system-wide services and functions on + network devices. + + Portions of this code were derived from IETF RFC 7317. + Please reproduce this note if possible. + + IETF code is subject to the following copyright and license: + Copyright (c) IETF Trust and the persons identified as authors of + the code. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in + Section 4.c of the IETF Trust's Legal Provisions Relating + to IETF Documents (http://trustee.ietf.org/license-info)."; + + oc-ext:openconfig-version "0.6.0"; + + revision "2018-07-17" { + description + "Add gRPC server data"; + reference "0.6.0"; + } + + revision "2018-01-21" { + description + "Add cpu utilization data"; + reference "0.5.0"; + } + + revision "2017-12-15" { + description + "Add alarms to the system model"; + reference "0.4.0"; + } + + revision "2017-09-18" { + description + "Updated to use OpenConfig types modules"; + reference "0.3.0"; + } + + revision "2017-07-06" { + description + "Move to oc-inet types, add IETF attribution, add RADIUS + counters, changed password leaf names to indicate hashed"; + reference "0.2.0"; + } + + revision "2017-01-29" { + description + "Initial public release"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + identity NTP_AUTH_TYPE { + description + "Base identity for encryption schemes supported for NTP + authentication keys"; + } + + identity NTP_AUTH_MD5 { + base NTP_AUTH_TYPE; + description + "MD5 encryption method"; + } + + // typedef statements + + typedef timezone-name-type { + type string; + description + "A time zone name as used by the Time Zone Database, + sometimes referred to as the 'Olson Database'. + + The exact set of valid values is an implementation-specific + matter. Client discovery of the exact set of time zone names + for a particular server is out of scope."; + reference + "BCP 175: Procedures for Maintaining the Time Zone Database"; + } + + // grouping statements + + grouping system-clock-config { + description + "Configuration data for system-wide clock configuration"; + + leaf timezone-name { + type timezone-name-type; + description + "The TZ database name to use for the system, such + as 'Europe/Stockholm'."; + reference "IANA Time Zone Database + http://www.iana.org/time-zones"; + } + } + + grouping system-clock-state { + description + "Operational state data for system-wide clock configuration"; + } + + grouping system-clock-top { + description + "Top-level grouping for system-wide clock configuration"; + + container clock { + description + "Top-level container for clock configuration data"; + + container config { + description + "Configuration data for system clock"; + + uses system-clock-config; + } + + container state { + + config false; + + description + "Operational state data for system clock"; + + uses system-clock-config; + uses system-clock-state; + } + } + } + + grouping system-global-config { + description "system-wide configuration parameters"; + + leaf hostname { + type oc-inet:domain-name; + description + "The hostname of the device -- should be a single domain + label, without the domain."; + } + + leaf domain-name { + type oc-inet:domain-name; + description + "Specifies the domain name used to form fully qualified name + for unqualified hostnames."; + } + + leaf login-banner { + type string; + description + "The console login message displayed before the login prompt, + i.e., before a user logs into the system."; + } + + leaf motd-banner { + type string; + description + "The console message displayed after a user logs into the + system. They system may append additional standard + information such as the current system date and time, uptime, + last login timestamp, etc."; + } + } + + grouping system-global-state { + description + "Global operational state data for the system"; + + leaf current-datetime { + type oc-yang:date-and-time; + description + "The current system date and time."; + } + + leaf boot-time { + type oc-types:timeticks64; + description + "This timestamp indicates the time that the system was last + restarted. The value is the timestamp in seconds relative + to the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + } + + grouping system-dns-config { + description "DNS / resolver related configuration data"; + + leaf-list search { + type oc-inet:domain-name; + ordered-by user; + description + "An ordered list of domains to search when resolving + a host name."; + } + } + + grouping system-dns-state { + description + "Operational state data for system DNS resolver"; + + } + + grouping system-dns-servers-config { + description + "Configuration data for DNS resolvers"; + + //RFC 7317 includes a single-value choice statement to for + //TCP and UDP transport. This has been removed since it the + //transport protocol is not generally available as an options + //on target devices. It may be added back if and when needed. + + leaf address { + type oc-inet:ip-address; + description + "The address of the DNS server, can be either IPv4 + or IPv6."; + } + + leaf port { + type oc-inet:port-number; + default 53; + description + "The port number of the DNS server."; + } + + //RFC 7317 includes resolver timeout and attempts options. These + //have been omitted as they are not available on many targets. If + //and when they are required, they may be added back in. + } + + grouping system-dns-static-config { + description + "Configuration data for static host entries"; + + leaf hostname { + type string; + description + "Hostname for the static DNS entry"; + } + + leaf-list alias { + type string; + description + "Additional aliases for the hostname"; + } + + leaf-list ipv4-address { + type oc-inet:ipv4-address; + description + "List of IPv4 addressses for the host entry"; + } + + leaf-list ipv6-address { + type oc-inet:ipv6-address; + description + "List of IPv6 addresses for the host entry"; + } + } + + grouping system-dns-static-state { + description + "Operational state data for static host entries"; + } + + grouping system-dns-static-top { + description + "Top-level grouping for static DNS host entries"; + + container host-entries { + description + "Enclosing container for list of static host entries"; + + list host-entry { + key "hostname"; + description + "List of static host entries"; + + leaf hostname { + type leafref { + path "../config/hostname"; + } + description + "Reference to the hostname list key"; + } + + container config { + description + "Configuration data for static host entries"; + + uses system-dns-static-config; + } + + container state { + + config false; + + description + "Operational state data for static host entries"; + + uses system-dns-static-config; + uses system-dns-static-state; + } + } + } + } + + grouping system-dns-servers-state { + description + "Operational state data for DNS resolvers"; + + } + + grouping system-dns-servers-top { + description + "Top-level grouping for the list of DNS resolvers."; + + container servers { + description + "Enclosing container for DNS resolver list"; + + list server { + key "address"; + ordered-by user; + description + "List of the DNS servers that the resolver should query. + + When the resolver is invoked by a calling application, it + sends the query to the first name server in this list. If + no response has been received within 'timeout' seconds, + the resolver continues with the next server in the list. + If no response is received from any server, the resolver + continues with the first server again. When the resolver + has traversed the list 'attempts' times without receiving + any response, it gives up and returns an error to the + calling application. + + Implementations MAY limit the number of entries in this + list."; + + leaf address { + type leafref { + path "../config/address"; + } + description + "References the configured address of the DNS server"; + } + + container config { + description + "Configuration data for each DNS resolver"; + + uses system-dns-servers-config; + } + + container state { + + config false; + + description + "Operational state data for each DNS resolver"; + + uses system-dns-servers-config; + uses system-dns-servers-state; + } + + } + } + } + + grouping system-dns-top { + description + "Top-level grouping for DNS / resolver config and operational + state data"; + + container dns { + description + "Enclosing container for DNS resolver data"; + + container config { + description + "Configuration data for the DNS resolver"; + + uses system-dns-config; + + } + + container state { + + config false; + + description + "Operational state data for the DNS resolver"; + + uses system-dns-config; + uses system-dns-state; + + } + + uses system-dns-servers-top; + uses system-dns-static-top; + } + } + + grouping system-ntp-server-config { + description + "Configuration data for NTP servers"; + + leaf address { + type oc-inet:host; + description + "The address or hostname of the NTP server."; + } + + leaf port { + type oc-inet:port-number; + default 123; + description + "The port number of the NTP server."; + } + + leaf version { + type uint8 { + range 1..4; + } + default 4; + description + "Version number to put in outgoing NTP packets"; + } + + leaf association-type { + type enumeration { + enum SERVER { + description + "Use client association mode. This device + will not provide synchronization to the + configured NTP server."; + } + enum PEER { + description + "Use symmetric active association mode. + This device may provide synchronization + to the configured NTP server."; + } + enum POOL { + description + "Use client association mode with one or + more of the NTP servers found by DNS + resolution of the domain name given by + the 'address' leaf. This device will not + provide synchronization to the servers."; + } + } + default SERVER; + description + "The desired association type for this NTP server."; + } + leaf iburst { + type boolean; + default false; + description + "Indicates whether this server should enable burst + synchronization or not."; + } + leaf prefer { + type boolean; + default false; + description + "Indicates whether this server should be preferred + or not."; + } + } + + grouping system-ntp-server-state { + description + "Operational state data for NTP servers"; + + leaf stratum { + type uint8; + description + "Indicates the level of the server in the NTP hierarchy. As + stratum number increases, the accuracy is degraded. Primary + servers are stratum while a maximum value of 16 indicates + unsynchronized. The values have the following specific + semantics: + + | 0 | unspecified or invalid + | 1 | primary server (e.g., equipped with a GPS receiver) + | 2-15 | secondary server (via NTP) + | 16 | unsynchronized + | 17-255 | reserved"; + reference + "RFC 5905 - Network Time Protocol Version 4: Protocol and + Algorithms Specification"; + } + + leaf root-delay { + type uint32; + // TODO: reconsider units for these values -- the spec defines + // rootdelay and rootdisperson as 2 16-bit integers for seconds + // and fractional seconds, respectively. This gives a + // precision of ~15 us (2^-16). Using milliseconds here based + // on what implementations typically provide and likely lack + // of utility for less than millisecond precision with NTP + // time sync. + units "milliseconds"; + description + "The round-trip delay to the server, in milliseconds."; + reference + "RFC 5905 - Network Time Protocol Version 4: Protocol and + Algorithms Specification"; + } + + leaf root-dispersion { + type uint64; + units "milliseconds"; + description + "Dispersion (epsilon) represents the maximum error inherent + in the measurement"; + reference + "RFC 5905 - Network Time Protocol Version 4: Protocol and + Algorithms Specification"; + } + + leaf offset { + type uint64; + units "milliseconds"; + description + "Estimate of the current time offset from the peer. This is + the time difference between the local and reference clock."; + } + + leaf poll-interval { + type uint32; + units "seconds"; + description + "Polling interval of the peer"; + } + } + + grouping system-ntp-server-top { + description + "Top-level grouping for the list of NTP servers"; + + container servers { + description + "Enclosing container for the list of NTP servers"; + + list server { + key "address"; + description + "List of NTP servers to use for system clock + synchronization. If '/system/ntp/enabled' + is 'true', then the system will attempt to + contact and utilize the specified NTP servers."; + + leaf address { + type leafref { + path "../config/address"; + } + description + "References the configured address or hostname of the + NTP server."; + } + + container config { + description + "Configuration data for an NTP server."; + + uses system-ntp-server-config; + } + + container state { + + config false; + + description + "Operational state data for an NTP server."; + + uses system-ntp-server-config; + uses system-ntp-server-state; + } + + } + } + } + + grouping system-ntp-auth-keys-config { + description + "Configuration data "; + + leaf key-id { + type uint16; + description + "Integer identifier used by the client and server to + designate a secret key. The client and server must use + the same key id."; + } + + leaf key-type { + type identityref { + base NTP_AUTH_TYPE; + } + description + "Encryption type used for the NTP authentication key"; + } + + leaf key-value { + type string; + description + "NTP authentication key value"; + } + } + + grouping system-ntp-auth-keys-state { + description + "Operational state data for NTP auth key data"; + } + + grouping system-ntp-auth-keys-top { + description + "Top-level grouping for NTP auth key data"; + + container ntp-keys { + description + "Enclosing container for list of NTP authentication keys"; + + list ntp-key { + key "key-id"; + description + "List of NTP authentication keys"; + + leaf key-id { + type leafref { + path "../config/key-id"; + } + description + "Reference to auth key-id list key"; + } + + container config { + description + "Configuration data for NTP auth keys"; + + uses system-ntp-auth-keys-config; + } + + container state { + + config false; + + description + "Operational state data for NTP auth keys"; + + uses system-ntp-auth-keys-config; + uses system-ntp-auth-keys-state; + } + } + } + } + + grouping system-ntp-config { + description + "Configuration data for system-wide NTP operation."; + + leaf enabled { + type boolean; + default false; + description + "Enables the NTP protocol and indicates that the system should + attempt to synchronize the system clock with an NTP server + from the servers defined in the 'ntp/server' list."; + } + + leaf ntp-source-address { + type oc-inet:ip-address; + description + "Source address to use on outgoing NTP packets"; + } + + leaf enable-ntp-auth { + type boolean; + default false; + description + "Enable or disable NTP authentication -- when enabled, the + system will only use packets containing a trusted + authentication key to synchronize the time."; + } + } + + grouping system-ntp-state { + description + "Operational state data for system-wide NTP operation."; + + leaf auth-mismatch { + type oc-yang:counter64; + description + "Count of the number of NTP packets received that were not + processed due to authentication mismatch."; + } + } + + grouping system-ntp-top { + description + "Top-level grouping for configuration and state data for NTP"; + + container ntp { + description + "Top-level container for NTP configuration and state"; + + container config { + description + "Configuration data for NTP client."; + + uses system-ntp-config; + } + + container state { + config false; + description + "Operational state data for NTP services."; + + uses system-ntp-config; + uses system-ntp-state; + } + uses system-ntp-auth-keys-top; + uses system-ntp-server-top; + } + } + + grouping system-memory-config { + description + "Configuration data for system memory"; + } + + grouping system-memory-state { + description + "Operational state data for system memory"; + + leaf physical { + type uint64; + units bytes; + // TODO: consider making units in megabytes + description + "Reports the total physical memory available on the + system."; + } + + leaf reserved { + type uint64; + units bytes; + description + "Memory reserved for system use"; + } + } + + grouping system-memory-top { + description + "Top-level grouping for system memory data definitions"; + + container memory { + description + "Top-level container for system memory data"; + + container config { + description + "Configuration data for system memory"; + + uses system-memory-config; + } + + container state { + config false; + description + "Operational state data for system memory"; + + uses system-memory-config; + uses system-memory-state; + } + } + } + + grouping system-cpu-state { + description + "Operational state data for the system CPU(s)"; + + leaf index { + type union { + type enumeration { + enum ALL { + description + "Index value indicating all CPUs in the system"; + } + } + type uint32; + } + description + "The CPU index for each processor core on the system. On a + single-core system, the index should be zero. The ALL + index signifies an aggregation of the CPU utilization + statistics over all cores in the system."; + } + + container total { + description + "Total CPU utilization."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container user { + description + "Percentage of CPU time spent running in user space."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container kernel { + description + "Percentage of CPU time spent running in kernel space."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container nice { + description + "Percentage of CPU time spent running low-priority (niced) + user processes."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container idle { + description + "Percentage of CPU time spent idle."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container wait { + description + "Percentage of CPU time spent waiting for I/O."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container hardware-interrupt { + description + "Percentage of CPU time spent servicing hardware interrupts."; + + uses oc-types:avg-min-max-instant-stats-pct; + } + + container software-interrupt { + description + "Percentage of CPU time spent servicing software interrupts"; + + uses oc-types:avg-min-max-instant-stats-pct; + } + } + + grouping system-cpu-top { + description + "Top-level grouping for system CPU data"; + + container cpus { + config false; + description + "Enclosing container for the list of CPU cores on the + system"; + + list cpu { + key "index"; + description + "List of CPU cores on the system (including logical CPUs + on hyperthreaded systems), keyed by either a numerical + index, or the ALL value for an entry representing the + aggregation across all CPUs."; + + leaf index { + type leafref { + path "../state/index"; + } + description + "Reference to list key"; + } + + container state { + + description + "Operational state data for the system CPU(s)"; + + uses system-cpu-state; + } + } + } + } + + grouping system-top { + description + "Top level system data containers"; + + container system { + description + "Enclosing container for system-related configuration and + operational state data"; + + container config { + description "Global configuration data for the system"; + + uses system-global-config; + + } + + container state { + config false; + description "Global operational state data for the system"; + + uses system-global-config; + uses system-global-state; + } + + uses system-clock-top; + uses system-dns-top; + uses system-ntp-top; + uses oc-sys-mgmt:system-grpc-server-top; + uses oc-sys-term:system-ssh-server-top; + uses oc-sys-term:system-telnet-server-top; + uses oc-log:logging-top; + uses oc-aaa:aaa-top; + uses system-memory-top; + uses system-cpu-top; + uses oc-proc:procmon-processes-top; + uses oc-alarms:alarms-top; + } + } + + // data definition statements + + uses system-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-telemetry-types.yang b/src/plugins/yang/openconfig/openconfig-telemetry-types.yang new file mode 100644 index 0000000..375fed1 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-telemetry-types.yang @@ -0,0 +1,115 @@ +module openconfig-telemetry-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/telemetry-types"; + + prefix "oc-telemetry-types"; + + import openconfig-extensions { prefix oc-ext; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines type and identities used by the OpenConfig + telemetry model."; + + oc-ext:openconfig-version "0.4.1"; + + revision "2017-08-24" { + description + "Minor formatting fixes"; + reference "0.4.1"; + } + + revision "2017-02-20" { + description + "Fixes for YANG 1.0 compliance, add types module"; + reference "0.4.0"; + } + + revision "2016-04-05" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + + + // identity statements + + identity DATA_ENCODING_METHOD { + description + "Base identity for supported encoding for configuration and + operational state data"; + } + + identity ENC_XML { + base DATA_ENCODING_METHOD; + description + "XML encoding"; + } + + identity ENC_JSON_IETF { + base DATA_ENCODING_METHOD; + description + "JSON encoded based on IETF draft standard"; + reference + "draft-ietf-netmod-yang-json"; + } + + identity ENC_PROTO3 { + base DATA_ENCODING_METHOD; + description + "Protocol buffers v3"; + reference + "https://developers.google.com/protocol-buffers/docs/overview"; + } + + identity STREAM_PROTOCOL { + description "Base identity for a telemetry stream protocol"; + } + + identity STREAM_SSH { + base "STREAM_PROTOCOL"; + description + "Telemetry stream is carried over a SSH connection"; + } + + identity STREAM_GRPC { + base "STREAM_PROTOCOL"; + description + "Telemetry stream is carried over via the gRPC framework"; + } + + identity STREAM_JSON_RPC { + base "STREAM_PROTOCOL"; + description + "Telemetry stream is carried via the JSON-RPC framework"; + } + + identity STREAM_THRIFT_RPC { + base "STREAM_PROTOCOL"; + description + "Telemetry stream is carried via the Apache Thrift framework"; + } + + identity STREAM_WEBSOCKET_RPC { + base "STREAM_PROTOCOL"; + description + "Telemetry stream is carried by the WebSocket framework"; + } + + + // typedef statements + + + +} diff --git a/src/plugins/yang/openconfig/openconfig-telemetry.yang b/src/plugins/yang/openconfig/openconfig-telemetry.yang new file mode 100644 index 0000000..de26ec3 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-telemetry.yang @@ -0,0 +1,771 @@ +module openconfig-telemetry { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/telemetry"; + + prefix "oc-telemetry"; + + // import some basic types + import openconfig-inet-types { prefix oc-inet; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-telemetry-types { prefix oc-telemetry-types; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group www.openconfig.net"; + + description + "Data model which creates the configuration for the telemetry + systems and functions on the device."; + + oc-ext:openconfig-version "0.5.0"; + + revision "2018-08-17" { + description + "Update telemetry model to comply with the OpenConfig + style for lists and their containers. Remove subscription + exclusions."; + reference "0.5.0"; + } + + revision "2017-08-24" { + description + "Minor formatting fixes"; + reference "0.4.1"; + } + + revision "2017-02-20" { + description + "Fixes for YANG 1.0 compliance, add types module"; + reference "0.4.0"; + } + + revision "2016-04-05" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + grouping telemetry-top { + description + "Top level grouping for telemetry configuration and operational + state data"; + + container telemetry-system { + description + "Top level configuration and state for the + device's telemetry system."; + + container sensor-groups { + description + "Top level container for sensor-groups."; + + list sensor-group { + key "sensor-group-id"; + description + "List of telemetry sensory groups on the local + system, where a sensor grouping represents a resuable + grouping of multiple paths and exclude filters."; + + leaf sensor-group-id { + type leafref { + path "../config/sensor-group-id"; + } + description + "Reference to the name or identifier of the + sensor grouping"; + } + + container config { + description + "Configuration parameters relating to the + telemetry sensor grouping"; + uses telemetry-sensor-group-config; + } + + container state { + config false; + description + "State information relating to the telemetry + sensor group"; + uses telemetry-sensor-group-config; + } + + container sensor-paths { + description + "Top level container to hold a set of sensor + paths grouped together"; + + list sensor-path { + key "path"; + description + "List of paths in the model which together + comprise a sensor grouping. Filters for each path + to exclude items are also provided."; + + leaf path { + type leafref { + path "../config/path"; + } + description + "Reference to the path of interest"; + } + + container config { + description + "Configuration parameters to configure a set + of data model paths as a sensor grouping"; + uses telemetry-sensor-path-config; + } + + container state { + config false; + description + "Configuration parameters to configure a set + of data model paths as a sensor grouping"; + uses telemetry-sensor-path-config; + } + } + } + } + } + + container destination-groups { + description + "Top level container for destination group configuration + and state."; + + list destination-group { + key "group-id"; + description + "List of destination-groups. Destination groups allow the + reuse of common telemetry destinations across the + telemetry configuration. An operator references a + set of destinations via the configurable + destination-group-identifier. + + A destination group may contain one or more telemetry + destinations"; + + leaf group-id { + type leafref { + path "../config/group-id"; + } + description + "Unique identifier for the destination group"; + } + + container config { + description + "Top level config container for destination groups"; + leaf group-id { + type string; + description + "Unique identifier for the destination group"; + } + } + + container state { + config false; + description + "Top level state container for destination groups"; + + leaf group-id { + type string; + description + "Unique identifier for destination group"; + } + } + + container destinations { + description + "The destination container lists the destination + information such as IP address and port of the + telemetry messages from the network element."; + list destination { + key "destination-address destination-port"; + description + "List of telemetry stream destinations"; + + leaf destination-address { + type leafref { + path "../config/destination-address"; + } + description + "Reference to the destination address of the + telemetry stream"; + } + + leaf destination-port { + type leafref { + path "../config/destination-port"; + } + description + "Reference to the port number of the stream + destination"; + } + + container config { + description + "Configuration parameters relating to + telemetry destinations"; + uses telemetry-stream-destination-config; + } + + container state { + config false; + description + "State information associated with + telemetry destinations"; + uses telemetry-stream-destination-config; + } + } + } + } + } + + container subscriptions { + description + "This container holds information for both persistent + and dynamic telemetry subscriptions."; + + container persistent-subscriptions { + description + "This container holds information relating to persistent + telemetry subscriptions. A persistent telemetry + subscription is configued locally on the device through + configuration, and is persistent across device restarts or + other redundancy changes."; + + list persistent-subscription { + key "name"; + + description + "List of telemetry subscriptions. A telemetry + subscription consists of a set of collection + destinations, stream attributes, and associated paths to + state information in the model (sensor data)"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the identifier of the subscription + itself. The id will be the handle to refer to the + subscription once created"; + } + + container config { + description + "Config parameters relating to the telemetry + subscriptions on the local device"; + + uses telemetry-subscription-name-config; + uses telemetry-local-source-address-config; + uses telemetry-qos-marking-config; + uses telemetry-stream-protocol-config; + uses telemetry-stream-encoding-config; + } + + container state { + config false; + description + "State parameters relating to the telemetry + subscriptions on the local device"; + + uses telemetry-subscription-name-config; + uses telemetry-subscription-config; + uses telemetry-subscription-state; + uses telemetry-local-source-address-config; + uses telemetry-qos-marking-config; + uses telemetry-stream-protocol-config; + uses telemetry-stream-encoding-config; + } + + container sensor-profiles { + description + "A sensor profile is a set of sensor groups or + individual sensor paths which are associated with a + telemetry subscription. This is the source of the + telemetry data for the subscription to send to the + defined collectors."; + list sensor-profile { + key "sensor-group"; + description + "List of telemetry sensor groups used + in the subscription"; + + leaf sensor-group { + type leafref { + path "../config/sensor-group"; + } + description + "Reference to the telemetry sensor group name"; + } + + container config { + description + "Configuration parameters related to the sensor + profile for a subscription"; + uses telemetry-sensor-profile-config; + } + + container state { + config false; + description + "State information relating to the sensor profile + for a subscription"; + uses telemetry-sensor-profile-config; + } + } + } + + container destination-groups { + description + "A subscription may specify destination addresses. + If the subscription supplies destination addresses, + the network element will be the initiator of the + telemetry streaming, sending it to the destination(s) + specified. + + If the destination set is omitted, the subscription + preconfigures certain elements such as paths and + sample intervals under a specified subscription ID. + In this case, the network element will NOT initiate an + outbound connection for telemetry, but will wait for + an inbound connection from a network management + system. + + It is expected that the network management system + connecting to the network element will reference + the preconfigured subscription ID when initiating + a subscription."; + + list destination-group { + key "group-id"; + description + "Identifier of the previously defined destination + group"; + + leaf group-id { + type leafref { + path "../config/group-id"; + } + description + "The destination group id references a configured + group of destinations for the telemetry stream."; + } + + container config { + description + "Configuration parameters related to telemetry + destinations."; + + leaf group-id { + type leafref { + path "../../../../../../../destination-groups" + + "/destination-group/group-id"; + } + description + "The destination group id references a reusable + group of destination addresses and ports for + the telemetry stream."; + } + } + + container state { + config false; + description + "State information related to telemetry + destinations"; + + leaf group-id { + type leafref { + path "../../../../../../../destination-groups" + + "/destination-group/group-id"; + } + description + "The destination group id references a reusable + group of destination addresses and ports for + the telemetry stream."; + } + } + } + } + } + } + + container dynamic-subscriptions { + description + "This container holds information relating to dynamic + telemetry subscriptions. A dynamic subscription is + typically configured through an RPC channel, and does not + persist across device restarts, or if the RPC channel is + reset or otherwise torn down."; + + + list dynamic-subscription { + key "id"; + + config false; + description + "List representation of telemetry subscriptions that + are configured via an inline RPC, otherwise known + as dynamic telemetry subscriptions."; + + leaf id { + type leafref { + path "../state/id"; + } + + description + "Reference to the identifier of the subscription + itself. The id will be the handle to refer to the + subscription once created"; + } + + container state { + config false; + description + "State information relating to dynamic telemetry + subscriptions."; + + uses telemetry-subscription-config; + uses telemetry-stream-destination-config; + uses telemetry-stream-frequency-config; + uses telemetry-heartbeat-config; + uses telemetry-suppress-redundant-config; + uses telemetry-qos-marking-config; + uses telemetry-stream-protocol-config; + uses telemetry-stream-encoding-config; + } + + container sensor-paths { + description + "Top level container to hold a set of sensor + paths grouped together"; + + list sensor-path { + key "path"; + description + "List of paths in the model which together + comprise a sensor grouping. Filters for each path + to exclude items are also provided."; + + leaf path { + type leafref { + path "../state/path"; + } + description + "Reference to the path of interest"; + } + + container state { + config false; + description + "State information for a dynamic subscription's + paths of interest"; + uses telemetry-sensor-path-config; + } + } + } + } + } + } + } + } + + // identity statements + + // typedef statements + + // grouping statements + + grouping telemetry-sensor-path-config { + description + "Configuration parameters relating to the + grouping of data model paths comprising a + sensor grouping"; + leaf path { + type string; + description + "Path to a section of operational state of interest + (the sensor)."; + } + + leaf exclude-filter { + type string; + description + "Filter to exclude certain values out of the state + values"; + //May not be necessary. Could remove. + } + } + + grouping telemetry-heartbeat-config { + description + "Configuration parameters relating to the + heartbeat of the telemetry subscription"; + leaf heartbeat-interval { + type uint64; + description + "Maximum time interval in seconds that may pass + between updates from a device to a telemetry collector. + If this interval expires, but there is no updated data to + send (such as if suppress_updates has been configured), the + device must send a telemetry message to the collector."; + } + } + + grouping telemetry-suppress-redundant-config { + description + "Configuration parameters relating to suppression of + redundant upstream updates"; + leaf suppress-redundant { + type boolean; + description + "Boolean flag to control suppression of redundant + telemetry updates to the collector platform. If this flag is + set to TRUE, then the collector will only send an update at + the configured interval if a subscribed data value has + changed. Otherwise, the device will not send an update to + the collector until expiration of the heartbeat interval."; + } + } + + grouping telemetry-sensor-profile-config { + description + "Configuration parameters relating to the sensor groups + used in the sensor profile"; + leaf sensor-group { + type leafref { + path "../../../../../../../sensor-groups/sensor-group" + + "/config/sensor-group-id"; + } + description + "Reference to the sensor group which is used in the profile"; + } + uses telemetry-stream-subscription-config; + } + + grouping telemetry-stream-subscription-config { + description + "Configuration used when the sensor is a stream based sensor."; + + uses telemetry-stream-frequency-config; + uses telemetry-heartbeat-config; + uses telemetry-suppress-redundant-config; + + } + + grouping telemetry-qos-marking-config { + description + "Config parameters relating to the quality of service + marking on device generated telemetry packets"; + + leaf originated-qos-marking { + type oc-inet:dscp; + description + "DSCP marking of packets generated by the telemetry + subsystem on the network device."; + } + } + + + grouping telemetry-sensor-group-config { + description + "Config parameters related to the sensor groups + on the device"; + leaf sensor-group-id { + type string; + description + "Name or identifier for the sensor group itself. + Will be referenced by other configuration specifying a + sensor group"; + } + } + + grouping telemetry-subscription-config { + description + "Configuration parameters relating to the telemetry + subscription"; + + leaf id { + type uint64; + description + "System generated identifer of the telemetry + subscription."; + } + } + + grouping telemetry-subscription-name-config { + description + "Configuration parameters relating to the configured + name of the telemetry subscription. The name is a user + configured string value which uniquely identifies the + subscription in the configuration database."; + + leaf name { + type string; + description + "User configured identifier of the telemetry + subscription. This value is used primarily for + subscriptions configured locally on the network + element."; + } + } + + grouping telemetry-subscription-state { + description + "State values for the telemetry subscription"; + //TODO add values + } + + grouping telemetry-stream-protocol-config { + description + "Configuration parameters relating to the + transport protocol carrying telemetry + data."; + + leaf protocol { + type identityref { + base oc-telemetry-types:STREAM_PROTOCOL; + } + description + "Selection of the transport protocol for the telemetry + stream."; + } + } + + grouping telemetry-stream-encoding-config { + description + "Configuration parameters relating to the + encoding of telemetry data to and from the + network element. The encoding method controls + specifically the wire format of the telemetry + data, and also controls which RPC framework + may be in use to exchange telemetry data."; + + leaf encoding { + type identityref { + base oc-telemetry-types:DATA_ENCODING_METHOD; + } + description + "Selection of the specific encoding or RPC framework + for telemetry messages to and from the network element."; + } + } + + grouping telemetry-stream-destination-config { + description + "Configuration parameters for the stream destinations"; + leaf destination-address { + type oc-inet:ip-address; + description + "IP address of the telemetry stream destination"; + } + leaf destination-port { + type uint16; + description + "Protocol (udp or tcp) port number for the telemetry + stream destination"; + } + } + + grouping telemetry-stream-frequency-config { + description + "Config parameters for the frequency of updates to + the collector"; + leaf sample-interval { + type uint64; + description + "Time in milliseconds between the device's sample of a + telemetry data source. For example, setting this to 100 + would require the local device to collect the telemetry + data every 100 milliseconds. There can be latency or jitter + in transmitting the data, but the sample must occur at + the specified interval. + + The timestamp must reflect the actual time when the data + was sampled, not simply the previous sample timestamp + + sample-interval. + + If sample-interval is set to 0, the telemetry sensor + becomes event based. The sensor must then emit data upon + every change of the underlying data source."; + } + } + + grouping telemetry-sensor-specification { + description + "Config related to creating telemetry sensor groups. A sensor + group is a related set of sensor paths and/or filters to + exclude items. A group is assigned a reusable identifer, so + it can be used in multiple telemetry subscriptions."; + list telemetry-sensor-group { + key "telemetry-sensor-group-id"; + description + "List of telemetry sensor groups"; + + leaf telemetry-sensor-group-id { + type string; + description + "The sensor group identifer is a reusable handle which + identifies a single sensor group. It is referenced from + the subscription configuration."; + } + uses telemetry-sensor-paths; + } + } + + grouping telemetry-sensor-paths { + description + "This grouping contains these paths to leaves or containers + in the data model which are the sources of telemetry + information."; + + list telemetry-sensor-paths { + key "telemetry-sensor-path"; + description + "A list of sensor paths and exclude filters which comprise + a sensor grouping"; + + leaf telemetry-sensor-path { + type string; + description + "The sensor path is a path to a portion of operational + state of interest in the data model"; + } + } + } + + + grouping telemetry-local-source-address-config { + description + "Config relating to the local source address for telemetry + messages"; + // TODO: Make this a reference to an interface. + leaf local-source-address { + type oc-inet:ip-address; + description + "The IP address which will be the source of packets from + the device to a telemetry collector destination."; + } + } + + // data definition statements + + uses telemetry-top; + + // augment statements + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-terminal-device.yang b/src/plugins/yang/openconfig/openconfig-terminal-device.yang new file mode 100644 index 0000000..27de12d --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-terminal-device.yang @@ -0,0 +1,1370 @@ +module openconfig-terminal-device { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/terminal-device"; + + prefix "oc-opt-term"; + + import openconfig-types { prefix oc-types; } + import openconfig-transport-types { prefix oc-opt-types; } + import openconfig-if-ethernet { prefix oc-eth; } + import openconfig-platform { prefix oc-platform; } + import openconfig-platform-transceiver { prefix oc-transceiver; } + import openconfig-lldp { prefix oc-lldp; } + import openconfig-extensions { prefix oc-ext; } + import ietf-yang-types { prefix yang; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-yang-types { prefix oc-yang; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module describes a terminal optics device model for + managing the terminal systems (client and line side) in a + DWDM transport network. + + Elements of the model: + + physical port: corresponds to a physical, pluggable client + port on the terminal device. Examples includes 10G, 40G, 100G + (e.g., 10x10G, 4x25G or 1x100G) and 400G/1T in the future. + Physical client ports will have associated operational state or + PMs. + + physical channel: a physical lane or channel in the + physical client port. Each physical client port has 1 or more + channels. An example is 100GBASE-LR4 client physical port having + 4x25G channels. Channels have their own optical PMs and can be + monitored independently within a client physical port (e.g., + channel power). Physical client channels are defined in the + model as part of a physical client port, and are modeled + primarily for reading their PMs. + + logical channel: a logical grouping of logical grooming elements + that may be assigned to subsequent grooming stages for + multiplexing / de-multiplexing, or to an optical channel for + line side transmission. The logical channels can represent, for + example, an ODU/OTU logical packing of the client + data onto the line side. Tributaries are similarly logical + groupings of demand that can be represented in this structure and + assigned to an optical channel. Note that different types of + logical channels may be present, each with their corresponding + PMs. + + optical channel: corresponds to an optical carrier and is + assigned a wavelength/frequency. Optical channels have PMs + such as power, BER, and operational mode. + + Directionality: + + To maintain simplicity in the model, the configuration is + described from client-to-line direction. The assumption is that + equivalent reverse configuration is implicit, resulting in + the same line-to-client configuration. + + Physical layout: + + The model does not assume a particular physical layout of client + and line ports on the terminal device (e.g., such as number of + ports per linecard, separate linecards for client and line ports, + etc.)."; + + oc-ext:openconfig-version "1.4.0"; + + revision "2018-08-28" { + description + "Adds terminal device related Ethernet counters"; + reference "1.4.0"; + } + + revision "2018-07-30" { + description + "Adds lldp snooping config leaf and augmented it to oc-lldp"; + reference "1.3.0"; + } + + revision "2018-07-26" { + description + "Adds OTN protocol counter stats of errored-blocks and + fec-uncorrectable-blocks, adds ethernet-config-ext grouping + and uses it to augment oc-eth"; + reference "1.2.0"; + } + + revision "2018-07-17" { + description + "Adds testing enum to link-state"; + reference "1.1.0"; + } + + revision "2017-07-08" { + description + "Adds test-signal"; + reference "1.0.0"; + } + + revision "2016-12-22" { + description + "Fixes and additions to terminal optics model"; + reference "0.4.0"; + } + + + grouping terminal-input-optical-power { + description + "Reusable leaves related to input optical power"; + + leaf input-power { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The input optical power of this port in units of 0.01dBm. + If the port is an aggregate of multiple physical channels, + this attribute is the total power or sum of all channels."; + } + } + + grouping terminal-ethernet-protocol-config { + description + "Configuration data for logical channels with Ethernet + framing"; + + //TODO:currently a empty container + } + + grouping terminal-ethernet-protocol-state { + description + "Ethernet-specific counters when logical channel + is using Ethernet protocol framing, e.g., 10GE, 100GE"; + + uses oc-eth:ethernet-interface-state-counters; + uses terminal-ethernet-protocol-state-counters; + } + + grouping terminal-ethernet-protocol-state-counters { + description + "Ethernet-specific counters for terminal devices when + logical channel is using Ethernet protocol framing, + e.g., 10GE, 100GE"; + + // ingress counters + + leaf in-pcs-bip-errors { + type oc-yang:counter64; + description + "The number of received bit interleaved parity (BIP) errors + at the physical coding sublayer (PCS). If the interface + consists of multiple lanes, this will be the sum of all + errors on the lane"; + } + + leaf in-pcs-errored-seconds { + type oc-yang:counter64; + description + "The number of seconds that physical coding sublayer (PCS) + errors have crossed a sytem defined threshold indicating the + link is erroring"; + } + + leaf in-pcs-severely-errored-seconds { + type oc-yang:counter64; + description + "The number of seconds that physical coding sublayer (PCS) + errors have crossed a system defined threshold indicating the + link is severely erroring"; + } + + leaf in-pcs-unavailable-seconds { + type oc-yang:counter64; + description + "The number of seconds that physical coding sublayer (PCS) + errors have crossed a system defined threshold indicating the + link is unavailable"; + } + + // egress counters + + leaf out-pcs-bip-errors { + type oc-yang:counter64; + description + "The number of transmitted bit interleaved parity (BIP) errors + at the physical coding sublayer (PCS). If the interface + consists of multiple lanes, this will be the sum of all + errors on the lane"; + } + + leaf out-crc-errors { + type oc-yang:counter64; + description + "Number of FCS/CRC error check failures sent on the interface"; + } + + leaf out-block-errors { + type oc-yang:counter64; + description + "The number of transmitted errored blocks. Error detection + codes are capable of detecting whether one or more errors have + occurred in a given sequence of bits - the block. It is + normally not possible to determine the exact number of errored + bits within the block"; + } + } + + grouping terminal-ethernet-protocol-top { + description + "Top-level grouping for data related to Ethernet protocol + framing on logical channels"; + + container ethernet { + description + "Top level container for data related to Ethernet framing + for the logical channel"; + + container config { + description + "Configuration data for Ethernet protocol framing on + logical channels"; + + uses terminal-ethernet-protocol-config; + } + + container state { + config false; + description + "Operational state data for Ethernet protocol framing + on logical channels"; + + uses terminal-ethernet-protocol-state; + } + } + } + + grouping terminal-otn-protocol-config { + description + "OTU configuration when logical channel + framing is using an OTU protocol, e.g., OTU1, OTU3, etc."; + + leaf tti-msg-transmit { + type string; + description + "Trail trace identifier (TTI) message transmitted"; + } + + leaf tti-msg-expected { + type string; + description + "Trail trace identifier (TTI) message expected"; + } + + leaf tti-msg-auto { + type boolean; + description + "Trail trace identifier (TTI) transmit message automatically + created. If true, then setting a custom transmit message + would be invalid."; + } + } + + grouping terminal-otn-protocol-counter-stats { + description + "Counter based statistics containers for logical channels + using OTN framing"; + + leaf errored-seconds { + type yang:counter64; + description + "The number of seconds that at least one errored blocks + occurs, at least one code violation occurs, loss of sync is + detected or loss of signal is detected"; + } + + leaf severely-errored-seconds { + type yang:counter64; + description + "The number of seconds that loss of frame is detected OR + the number of errored blocks, code violations, loss of sync + or loss of signal is detected exceeds a predefined + threshold"; + } + + leaf unavailable-seconds { + type yang:counter64; + description + "The number of seconds during which the link is unavailable"; + } + + leaf code-violations { + type yang:counter64; + description + "For ethernet or fiberchannel links, the number of 8b/10b + coding violations. For SONET/SDH, the number of BIP (bit + interleaved parity) errors"; + } + + leaf errored-blocks { + type yang:counter64; + description + "The number of errored blocks. Error detection codes are + capable to detect whether one or more errors have occurred + in a given sequence of bits - the block. It is normally not + possible to determine the exact number of errored bits within + the block."; + reference "ITU-T Rec. G.826"; + } + + leaf fec-uncorrectable-blocks { + type yang:counter64; + description + "The number of blocks that were uncorrectable by the FEC"; + } + + leaf fec-uncorrectable-words { + type yang:counter64; + description + "The number of words that were uncorrectable by the FEC"; + } + + leaf fec-corrected-bytes { + type yang:counter64; + description + "The number of bytes that were corrected by the FEC"; + } + + leaf fec-corrected-bits { + type yang:counter64; + description + "The number of bits that were corrected by the FEC"; + } + + leaf background-block-errors { + type yang:counter64; + description + "The number of background block errors"; + } + } + + grouping terminal-otn-protocol-multi-stats { + description + "Multi-value statistics containers for logical channels using + OTN framing (e.g., max, min, avg, instant)"; + + container pre-fec-ber { + description + "Bit error rate before forward error correction -- computed + value with 18 decimal precision. Note that decimal64 + supports values as small as i x 10^-18 where i is an + integer. Values smaller than this should be reported as 0 + to inidicate error free or near error free performance. + Values include the instantaneous, average, minimum, and + maximum statistics. If avg/min/max statistics are not + supported, the target is expected to just supply the + instant value"; + + uses oc-opt-types:avg-min-max-instant-stats-precision18-ber; + } + + container post-fec-ber { + description + "Bit error rate after forward error correction -- computed + value with 18 decimal precision. Note that decimal64 + supports values as small as i x 10^-18 where i is an + integer. Values smaller than this should be reported as 0 + to inidicate error free or near error free performance. + Values include the instantaneous, average, minimum, and + maximum statistics. If avg/min/max statistics are not + supported, the target is expected to just supply the + instant value"; + + uses oc-opt-types:avg-min-max-instant-stats-precision18-ber; + } + + container q-value { + description + "Quality value (factor) in dB of a channel with two + decimal precision. Values include the instantaneous, + average, minimum, and maximum statistics. If avg/min/max + statistics are not supported, the target is expected + to just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dB; + } + + container esnr { + description + "Electrical signal to noise ratio. Baud rate + normalized signal to noise ratio based on + error vector magnitude in dB with two decimal + precision. Values include the instantaneous, average, + minimum, and maximum statistics. If avg/min/max + statistics are not supported, the target is expected + to just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dB; + } + } + + grouping terminal-otn-protocol-state { + description + "OTU operational state when logical channel + framing is using an OTU protocol, e.g., OTU1, OTU3, etc."; + + + leaf tti-msg-recv { + type string; + description + "Trail trace identifier (TTI) message received"; + } + + leaf rdi-msg { + type string; + description + "Remote defect indication (RDI) message received"; + } + uses terminal-otn-protocol-counter-stats; + uses terminal-otn-protocol-multi-stats; + } + + grouping terminal-otn-protocol-top { + description + "Top-level grouping for data related to OTN protocol framing"; + + container otn { + description + "Top level container for OTU configuration when logical + channel framing is using an OTU protocol, e.g., OTU1, OTU3, + etc."; + + container config { + description + "Configuration data for OTN protocol framing"; + + uses terminal-otn-protocol-config; + } + + container state { + + config false; + + description + "Operational state data for OTN protocol PMs, statistics, + etc."; + + uses terminal-otn-protocol-config; + uses terminal-otn-protocol-state; + } + } + } + + grouping terminal-client-port-assignment-config { + description + "Configuration data for assigning physical client ports to + logical channels"; + + leaf index { + type uint32; + description + "Index of the client port assignment"; + } + + leaf description { + type string; + description + "Descriptive name for the client port-to-logical channel + mapping"; + } + + leaf logical-channel { + type leafref { + path "/oc-opt-term:terminal-device/oc-opt-term:logical-channels" + + "/oc-opt-term:channel/oc-opt-term:index"; + } + description + "Reference to the logical channel for this + assignment"; + } + + leaf allocation { + type decimal64 { + fraction-digits 3; + } + units Gbps; + description + "Allocation of the client physical port to the assigned + logical channel expressed in Gbps. In most cases, + the full client physical port rate is assigned to a single + logical channel."; + } + + } + + grouping terminal-client-port-assignment-state { + description + "Operational state data for assigning physical client ports + to logical channels"; + } + + grouping terminal-client-port-assignment-top { + description + "Top-level grouping for the assigment of client physical ports + to logical channels"; + //TODO: this grouping could be removed, instead reusing a common + //grouping for logical client assignment pointers + + container logical-channel-assignments { + description + "Enclosing container for client port to logical client + mappings"; + + list assignment { + key "index"; + description + "List of assignments to logical clients"; + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the index of this logical client + assignment"; + } + + container config { + description + "Configuration data for the logical client assignment"; + + uses terminal-client-port-assignment-config; + } + + container state { + + config false; + + description + "Operational state data for the logical client + assignment"; + + uses terminal-client-port-assignment-config; + uses terminal-client-port-assignment-state; + } + } + } + } + + + grouping terminal-logical-chan-assignment-config { + description + "Configuration data for assigning client logical channels + to line-side tributaries"; + + leaf index { + type uint32; + description + "Index of the current logical client channel to tributary + mapping"; + } + + leaf description { + type string; + description + "Name assigned to the logical client channel"; + } + + leaf assignment-type { + type enumeration { + enum LOGICAL_CHANNEL { + description + "Subsequent channel is a logical channel"; + } + enum OPTICAL_CHANNEL { + description + "Subsequent channel is a optical channel / carrier"; + } + } + description + "Each logical channel element may be assigned to subsequent + stages of logical elements to implement further grooming, or + can be assigned to a line-side optical channel for + transmission. Each assignment also has an associated + bandwidth allocation."; + } + + leaf logical-channel { + type leafref { + path "/oc-opt-term:terminal-device/" + + "oc-opt-term:logical-channels/oc-opt-term:channel/" + + "oc-opt-term:index"; + } + must "../assignment-type = 'LOGICAL_CHANNEL'" { + description + "The assignment-type must be set to LOGICAL_CHANNEL for + this leaf to be valid"; + } + description + "Reference to another stage of logical channel elements."; + } + + leaf optical-channel { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + must "../assignment-type = 'OPTICAL_CHANNEL'" { + description + "The assignment-type must be set to OPTICAL_CHANNEL for + this leaf to be valid"; + } + description + "Reference to the line-side optical channel that should + carry the current logical channel element. Use this + reference to exit the logical element stage."; + } + + leaf allocation { + type decimal64 { + fraction-digits 3; + } + units Gbps; + description + "Allocation of the logical client channel to the tributary + or sub-channel, expressed in Gbps"; + } + + } + + grouping terminal-logical-chan-assignment-state { + description + "Operational state data for the assignment of logical client + channel to line-side tributary"; + } + + grouping terminal-logical-chan-assignment-top { + description + "Top-level grouping for the list of logical client channel-to- + tributary assignments"; + + container logical-channel-assignments { + //TODO: we need a commonly understood name for this logical + //channel structure + description + "Enclosing container for tributary assignments"; + + list assignment { + key "index"; + description + "Logical channel elements may be assigned directly to + optical channels for line-side transmission, or can be + further groomed into additional stages of logical channel + elements. The grooming can multiplex (i.e., split the + current element into multiple elements in the subsequent + stage) or de-multiplex (i.e., combine the current element + with other elements into the same element in the subsequent + stage) logical elements in each stage. + + Note that to support the ability to groom the logical + elements, the list of logical channel elements should be + populated with an entry for the logical elements at + each stage, starting with the initial assignment from the + respective client physical port. + + Each logical element assignment consists of a pointer to + an element in the next stage, or to an optical channel, + along with a bandwidth allocation for the corresponding + assignment (e.g., to split or combine signal)."; + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the index for the current tributary + assignment"; + } + + container config { + description + "Configuration data for tributary assignments"; + + uses terminal-logical-chan-assignment-config; + } + + container state { + + config false; + + description + "Operational state data for tributary assignments"; + + uses terminal-logical-chan-assignment-config; + uses terminal-logical-chan-assignment-state; + } + } + } + } + + grouping terminal-logical-channel-ingress-config { + description + "Configuration data for ingress signal to logical channel"; + + leaf transceiver { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to the transceiver carrying the input signal + for the logical channel. If specific physical channels + are mapped to the logical channel (as opposed to all + physical channels carried by the transceiver), they can be + specified in the list of physical channel references."; + } + + leaf-list physical-channel { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-transceiver:transceiver/" + + "oc-transceiver:physical-channels/" + + "oc-transceiver:channel/oc-transceiver:index"; + } + description + "This list should be populated with references + to the client physical channels that feed this logical + channel from the transceiver specified in the 'transceiver' + leaf, which must be specified. If this leaf-list is empty, + all physical channels in the transceiver are assumed to be + mapped to the logical channel."; + } + } + + grouping terminal-logical-channel-ingress-state { + description + "Operational state data for ingress signal to logical channel"; + } + + grouping terminal-logical-channel-ingress-top { + description + "Top-level grouping for ingress signal to logical channel"; + + container ingress { + description + "Top-level container for specifying references to the + source of signal for the logical channel, either a + transceiver or individual physical channels"; + + container config { + description + "Configuration data for the signal source for the + logical channel"; + + uses terminal-logical-channel-ingress-config; + } + + container state { + + config false; + + description + "Operational state data for the signal source for the + logical channel"; + + uses terminal-logical-channel-ingress-config; + uses terminal-logical-channel-ingress-state; + } + } + } + + grouping terminal-logical-channel-config { + description + "Configuration data for logical channels"; + + leaf index { + type uint32; + description + "Index of the current logical channel"; + } + + leaf description { + type string; + description + "Description of the logical channel"; + } + + leaf admin-state { + type oc-opt-types:admin-state-type; + description + "Sets the admin state of the logical channel"; + } + + leaf rate-class { + type identityref { + base oc-opt-types:TRIBUTARY_RATE_CLASS_TYPE; + } + description + "Rounded bit rate of the tributary signal. Exact bit rate + will be refined by protocol selection."; + } + + leaf trib-protocol { + type identityref { + base oc-opt-types:TRIBUTARY_PROTOCOL_TYPE; + } + description + "Protocol framing of the tributary signal. If this + LogicalChannel is directly connected to a Client-Port or + Optical-Channel, this is the protocol of the associated port. + If the LogicalChannel is connected to other LogicalChannels, + the TributaryProtocol of the LogicalChannels will define a + specific mapping/demapping or multiplexing/demultiplexing + function. + + Not all protocols are valid, depending on the value + of trib-rate-class. The expectation is that the NMS + will validate that a correct combination of rate class + and protocol are specfied. Basic combinations are: + + rate class: 1G + protocols: 1GE + + rate class: 2.5G + protocols: OC48, STM16 + + rate class: 10G + protocols: 10GE LAN, 10GE WAN, OC192, STM64, OTU2, OTU2e, + OTU1e, ODU2, ODU2e, ODU1e + + rate class: 40G + protocols: 40GE, OC768, STM256, OTU3, ODU3 + + rate class: 100G + protocols: 100GE, 100G MLG, OTU4, OTUCn, ODU4"; + } + + leaf logical-channel-type { + type identityref { + base oc-opt-types:LOGICAL_ELEMENT_PROTOCOL_TYPE; + } + description + "The type / stage of the logical element determines the + configuration and operational state parameters (PMs) + available for the logical element"; + } + + leaf loopback-mode { + type oc-opt-types:loopback-mode-type; + description + "Sets the loopback type on the logical channel. Setting the + mode to something besides NONE activates the loopback in + the specified mode."; + } + + leaf test-signal { + type boolean; + description + "When enabled the logical channel's DSP will generate a pseudo + randmon bit stream (PRBS) which can be used during testing."; + } + } + + + grouping terminal-logical-channel-state { + description + "Operational state data for logical client channels"; + + leaf link-state { + type enumeration { + enum UP { + description + "Logical channel is operationally up"; + } + enum DOWN { + description + "Logical channel is operationally down"; + } + enum TESTING { + description + "Logical channel is under test as a result of + enabling test-signal"; + } + } + description + "Link-state of the Ethernet protocol on the logical channel, + SONET / SDH framed signal, etc."; + } + + } + + grouping terminal-logical-channel-top { + description + "Top-level grouping for logical channels"; + + container logical-channels { + description + "Enclosing container the list of logical channels"; + + list channel { + key "index"; + description + "List of logical channels"; + //TODO: naming for this list of logical elements should be + //revisited. + + leaf index { + type leafref { + path "../config/index"; + } + description + "Reference to the index of the logical channel"; + } + + container config { + description + "Configuration data for logical channels"; + + uses terminal-logical-channel-config; + + } + + container state { + + config false; + + description + "Operational state data for logical channels"; + + uses terminal-logical-channel-config; + uses terminal-logical-channel-state; + } + + uses terminal-otn-protocol-top { + when "config/logical-channel-type = 'PROT_OTN'" { + description + "Include the OTN protocol data only when the + channel is using OTN framing."; + } + } + uses terminal-ethernet-protocol-top { + when "config/logical-channel-type = 'PROT_ETHERNET'" { + description + "Include the Ethernet protocol statistics only when the + protocol used by the link is Ethernet."; + } + } + uses terminal-logical-channel-ingress-top; + uses terminal-logical-chan-assignment-top; + } + } + } + + + grouping terminal-optical-channel-config { + description + "Configuration data for describing optical channels"; + + leaf frequency { + type oc-opt-types:frequency-type; + description + "Frequency of the optical channel, expressed in MHz"; + } + + leaf target-output-power { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "Target output optical power level of the optical channel, + expressed in increments of 0.01 dBm (decibel-milliwats)"; + } + + leaf operational-mode { + type uint16; + description + "Vendor-specific mode identifier -- sets the operational + mode for the channel. The specified operational mode must + exist in the list of supported operational modes supplied + by the device"; + // + // Ideally, this leaf should be a leafref to the supported + // operational modes, but YANG 1.0 does not allow a r/w + // leaf to be a leafref to a r/o leaf. + } + + + leaf line-port { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to the line-side physical port that carries + this optical channel. The target port should be + a component in the physical inventory data model."; + } + } + + grouping terminal-optical-channel-state { + description + "Operational state data for optical channels"; + + leaf group-id { + type uint32; + description + "If the device places constraints on which optical + channels must be managed together (e.g., transmitted on the + same line port), it can indicate that by setting the group-id + to the same value across related optical channels."; + } + + uses oc-transceiver:optical-power-state; + + container chromatic-dispersion { + description + "Chromatic Dispersion of an optical channel in + picoseconds / nanometer (ps/nm) as reported by receiver + with two decimal precision. Values include the instantaneous, + average, minimum, and maximum statistics. If avg/min/max + statistics are not supported, the target is expected to just + supply the instant value"; + + uses oc-opt-types:avg-min-max-instant-stats-precision2-ps-nm; + } + + container polarization-mode-dispersion { + description + "Polarization Mode Dispersion of an optical channel + in picosends (ps) as reported by receiver with two decimal + precision. Values include the instantaneous, average, + minimum, and maximum statistics. If avg/min/max statistics + are not supported, the target is expected to just supply the + instant value"; + + uses oc-opt-types:avg-min-max-instant-stats-precision2-ps; + } + + container second-order-polarization-mode-dispersion { + description + "Second Order Polarization Mode Dispersion of an optical + channel in picoseconds squared (ps^2) as reported by + receiver with two decimal precision. Values include the + instantaneous, average, minimum, and maximum statistics. + If avg/min/max statistics are not supported, the target + is expected to just supply the instant value"; + + uses oc-opt-types:avg-min-max-instant-stats-precision2-ps2; + } + + container polarization-dependent-loss { + description + "Polarization Dependent Loss of an optical channel + in dB as reported by receiver with two decimal precision. + Values include the instantaneous, average, minimum, and + maximum statistics. If avg/min/max statistics are not + supported, the target is expected to just supply the + instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dB; + } + } + + grouping terminal-optical-channel-top { + description + "Top-level grouping for optical channel data"; + + container optical-channel { + description + "Enclosing container for the list of optical channels"; + + container config { + description + "Configuration data for optical channels"; + + uses terminal-optical-channel-config; + } + + container state { + + config false; + + description + "Operational state data for optical channels"; + + uses terminal-optical-channel-config; + uses terminal-optical-channel-state; + } + } + } + + grouping terminal-operational-mode-config { + description + "Configuration data for vendor-supported operational modes"; + } + + grouping terminal-operational-mode-state { + description + "Operational state data for vendor-supported operational + modes"; + + leaf mode-id { + type uint16; + description + "Two-octet encoding of the vendor-defined operational + mode"; + } + + leaf description { + type string; + description + "Vendor-supplied textual description of the characteristics + of this operational mode to enable operators to select the + appropriate mode for the application."; + } + + //TODO: examples of the kind of info that would be useful to + //report in the operational mode: + //Symbol rate (32G, 40G, 43G, 64G, etc.) + //Modulation (QPSK, 8-QAM, 16-QAM, etc.) + //Differential encoding (on, off/pilot symbol, etc) + //State of polarization tracking mode (default, med. + //high-speed, etc.) + //Pulse shaping (RRC, RC, roll-off factor) + //FEC mode (SD, HD, % OH) + + leaf vendor-id { + type string; + description + "Identifier to represent the vendor / supplier of the + platform and the associated operational mode information"; + } + } + + grouping terminal-operational-mode-top { + description + "Top-level grouping for vendor-supported operational modes"; + + container operational-modes { + description + "Enclosing container for list of operational modes"; + + list mode { + key "mode-id"; + config false; + description + "List of operational modes supported by the platform. + The operational mode provides a platform-defined summary + of information such as symbol rate, modulation, pulse + shaping, etc."; + + leaf mode-id { + type leafref { + path "../state/mode-id"; + } + description + "Reference to mode-id"; + } + + container config { + description + "Configuration data for operational mode"; + + uses terminal-operational-mode-config; + } + + container state { + + config false; + + description + "Operational state data for the platform-defined + operational mode"; + + uses terminal-operational-mode-config; + uses terminal-operational-mode-state; + } + } + } + } + + grouping ethernet-config-ext { + description + "Extended ethernet config data on terminal device"; + + leaf client-fec { + type enumeration { + enum ENABLED { + description + "FEC is enabled"; + } + + enum DISABLED { + description + "FEC is disabled"; + } + + enum AUTO { + description + "System will automatically enable or disable FEC + according to the Ethernet compliance codes (PMD) + supported by transceivers"; + } + } + default AUTO; + description + "Configure whether FEC will be manually or automatically + enabled or disabled on the client port"; + } + + leaf client-als { + type enumeration { + enum NONE { + description + "The client port will do nothing when a failure is + detected on the line port or the remote client port"; + } + enum LASER_SHUTDOWN { + description + "The client port will shut down the laser to notify the + subtending Ethernet equipment of the failure detected on + the line port or the remote client port."; + } + enum ETHERNET { + description + "The client port will propagate the local fault or remote + fault signal to the subtending Ethernet equipment."; + } + } + default ETHERNET; + description + "Sets the client port behavior that defines if the actions + of automatic laser shutdown (als), ethernet fault + propagation, or nothing will be done upon the detection + of a failure on the line port or the upstream remote + client port."; + } + + leaf als-delay { + type uint32; + units milliseconds; + default 0; + description + "The timer to delay the client-als actions on the client + port when a local or remote fault is detected on the line + port. The delay will only be valid when the client-als is + set to LASER_SHUTDOWN"; + } + } + + grouping terminal-device-config { + description + "Configuration data for transport terminal devices at a + device-wide level"; + } + + grouping terminal-device-state { + description + "Operational state data for transport terminal devices at a + device-wide level"; + } + + grouping terminal-device-top { + description + "Top-level grouping for data for terminal devices"; + + container terminal-device { + description + "Top-level container for the terminal device"; + + container config { + description + "Configuration data for global terminal-device"; + + uses terminal-device-config; + } + + container state { + + config false; + + description + "Operational state data for global terminal device"; + + uses terminal-device-config; + uses terminal-device-state; + } + + uses terminal-logical-channel-top; + uses terminal-operational-mode-top; + + } + } + + + grouping lldp-interface-config { + description + "Extension to the configuration data for LLDP on each + optical terminal interface"; + + leaf snooping { + type boolean; + default "false"; + description + "If true, LLDP PDUs are only received and processed on + the interface, but are not originated by the local agent. + The PDUs are not dropped by the interface after processing, + but relayed to the downstream link layer neighbors. + If false, LLDP PDUs are both received and originated on the + interface. The snooping mode is valid only when LLDP is + enabled on the interface. The snooping mode is useful + when an interface does not want its link layer neighbors to + discover itself since, for example, it is a lower-layer + interface"; + } + } + + // data definition statements + + uses terminal-device-top; + + // augment statements + + augment "/oc-platform:components/oc-platform:component" { + when "/oc-platform:components/oc-platform:component/" + + "oc-platform:state/oc-platform:type = 'OPTICAL_CHANNEL'" { + description + "Augment is active when component is of type + OPTICAL_CHANNEL"; + } + description + "Adding optical channel data to physical inventory"; + + uses terminal-optical-channel-top { + } + } + + augment "/oc-if:interfaces/oc-if:interface/oc-eth:ethernet" + + "/oc-eth:config" { + description + "Adds configuration data for client interfaces using Ethernet + framing"; + + uses ethernet-config-ext; + } + + augment "/oc-lldp:lldp/oc-lldp:interfaces/oc-lldp:interface/" + + "oc-lldp:config" { + description + "Augment the lldp config data to support the snooping mode + for each optical terminal interface"; + + uses lldp-interface-config; + } +} diff --git a/src/plugins/yang/openconfig/openconfig-transport-line-common.yang b/src/plugins/yang/openconfig/openconfig-transport-line-common.yang new file mode 100644 index 0000000..9db16b6 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-transport-line-common.yang @@ -0,0 +1,317 @@ +module openconfig-transport-line-common { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/transport-line-common"; + + prefix "oc-line-com"; + + // import some basic types + import iana-if-type { prefix ift; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-platform { prefix oc-platform; } + import openconfig-types { prefix oc-types; } + import openconfig-transport-types { prefix oc-opt-types; } + import openconfig-platform-transceiver { prefix oc-transceiver; } + + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module defines common data elements for OpenConfig data + models for optical transport line system elements, such as + amplifiers and ROADMs (wavelength routers)."; + + oc-ext:openconfig-version "0.4.1"; + + revision "2018-07-17" { + description + "Remove leaf 'enabled' from osc-config"; + reference "0.4.1"; + } + + revision "2018-05-08" { + description + "Added leaf 'enabled' to osc-config and + leaf 'output-frequency' to osc-state"; + reference "0.4.0"; + } + + revision "2017-09-08" { + description + "Correct bug with OSC interfaces"; + reference "0.3.1"; + } + + revision "2017-07-08" { + description + "Add monitor port type and refs to hw ports, "; + reference "0.3.0"; + } + + revision "2017-03-28" { + description + "Added min/max/avg stats, status for media channels, OCM, APS"; + reference "0.2.0"; + } + + revision "2016-03-31" { + description + "Initial public release"; + reference "0.1.0"; + } + + + // extension statements + + // feature statements + + // identity statements + + identity OPTICAL_LINE_PORT_TYPE { + description + "Type definition for optical node port types"; + } + + identity INGRESS { + base OPTICAL_LINE_PORT_TYPE; + description + "Ingress port, corresponding to a signal entering + a line device such as an amplifier or wavelength + router."; + } + + identity EGRESS { + base OPTICAL_LINE_PORT_TYPE; + description + "Egress port, corresponding to a signal exiting + a line device such as an amplifier or wavelength + router."; + } + + identity ADD { + base OPTICAL_LINE_PORT_TYPE; + description + "Add port, corresponding to a signal injected + at a wavelength router."; + } + + identity DROP { + base OPTICAL_LINE_PORT_TYPE; + description + "Drop port, corresponding to a signal dropped + at a wavelength router."; + } + + identity MONITOR { + base OPTICAL_LINE_PORT_TYPE; + description + "Monitor port, corresponding to a signal used by an optical + channel monitor. This is used to represent the connection + that a channel monitor port is connected to. This + connection may be via physical cable and faceplate ports or + internal to the device"; + } + + // typedef statements + + // grouping statements + + grouping optical-osc-config { + description + "Configuration data for OSC interfaces"; + + leaf interface { + type oc-if:base-interface-ref; + description + "Reference to an OSC interface"; + } + } + + grouping optical-osc-state { + description + "Operational state data for OSC interfaces"; + + container input-power { + description + "The input optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + the target is expected to just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container output-power { + description + "The output optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + the target is expected to just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container laser-bias-current { + description + "The current applied by the system to the transmit laser to + achieve the output power. The current is expressed in mA + with up to one decimal precision. If avg/min/max statistics + are not supported, the target is expected to just supply + the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-mA; + } + + uses oc-transceiver:output-optical-frequency; + } + + + + grouping optical-osc-top { + description + "Top-level grouping for configuration and operational state + data for optical supervisory channels (OSC) for amplifiers, + WSS/ROADM, nodes, etc."; + + container config { + description + "Configuration data for OSCs"; + + uses optical-osc-config; + } + + container state { + + config false; + + description + "Operational state data for OSCs"; + + uses optical-osc-config; + uses optical-osc-state; + } + } + + + grouping transport-line-common-port-config { + description + "Configuration data for optical line ports"; + + leaf admin-state { + type oc-opt-types:admin-state-type; + description + "Sets the admin state of the optical-port"; + } + } + + grouping transport-line-common-port-state { + description + "Operational state data describing optical line ports"; + + leaf optical-port-type { + type identityref { + base OPTICAL_LINE_PORT_TYPE; + } + description + "Indicates the type of transport line port. This is an + informational field that should be made available by the + device (e.g., in the openconfig-platform model)."; + } + + container input-power { + description + "The total input optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + + container output-power { + description + "The total output optical power of this port in units + of 0.01dBm. If avg/min/max statistics are not supported, + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + } + + grouping transport-line-common-port-top { + description + "Top-level grouping "; + + container optical-port { + description + "Top-level container "; + + container config { + + description + "Operational config data for optical line ports"; + + uses transport-line-common-port-config; + } + + container state { + + config false; + + description + "Operational state data for optical line ports"; + + uses transport-line-common-port-config; + uses transport-line-common-port-state; + } + } + } + + + + // data definition statements + + // uses optical-osc-top; + + // augment statements + + augment "/oc-platform:components/oc-platform:component" { + description + "Adding optical line port data to platform model"; + + uses transport-line-common-port-top { + when "/oc-platform:components/oc-platform:component/" + + "oc-platform:state/oc-platform:type = 'PORT'" { + description + "Augment is active when component is of type + PORT"; + } + } + } + + //TODO:this is placeholder until SONET model is added + //to interfaces model + augment "/oc-if:interfaces/oc-if:interface" { + when "oc-if:config/oc-if:type = 'ift:sonet'" { + description "Additional interface configuration parameters when + the interface type is SONET/SDH"; + } + description "Adds additional SONET/SDH-specific data to + osc model"; + + container sonet { + description + "Data related to SONET/SDH interfaces"; + } + } + + // rpc statements + + // notification statements + +} diff --git a/src/plugins/yang/openconfig/openconfig-transport-line-protection.yang b/src/plugins/yang/openconfig/openconfig-transport-line-protection.yang new file mode 100644 index 0000000..0e21a02 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-transport-line-protection.yang @@ -0,0 +1,612 @@ +module openconfig-transport-line-protection { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/optical-transport-line-protection"; + + prefix "oc-line-protect"; + + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + import openconfig-platform { prefix oc-platform; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This model describes configuration and operational state data + for optical line protection elements, deployed as part of a + transport line system. An Automatic Protection Switch (APS) + is typically installed in the same device as the amplifiers + and wave-router, however an APS can also be a standalone + device. In both scenarios, it serves the same purpose of + providing protection using two dark fiber pairs to ensure the + amplifiers can still receive a signal if one of the two fiber + pairs is broken. The APS port details and directionality are + shown below. The three major attributes, together with their + modifiers, define the behavior of the APS and can be prioritized + in the descending order as shown in the following table"; + + // + // Automatic Protection Switch (APS) port details and directionality. + // _________ + // | | + // | | <=== LINE-PRIMARY-IN + // | | + // COMMON-IN ===> | | ===> LINE-PRIMARY-OUT + // | | + // | APS | + // COMMON-OUT <=== | | + // | | <=== LINE-SECONDARY-IN + // | | + // | | ===> LINE-SECONDARY-OUT + // |_______| + // + // + // The interaction of configuration attributes that control the + // protection switching behavior + // +------------------+--------------------+------------------------+ + // | Attribute | Modifier | Behavior | + // +------------------+--------------------+------------------------+ + // | force-to-port | n/a | turns off switching | + // | | | by forcing to primary | + // | | | or secondary | + // +------------------+--------------------+------------------------+ + // | relative-switch | relative-threshold | if set, overrides | + // | -threshold | -offset | primary and secondary | + // | | | switch thresholds | + // +------------------+--------------------+------------------------+ + // | primary-switch | primary-switch | sets respective | + // | -threshold, | -hysteresis | threshold to switch | + // | secondary-switch | | to opposite port | + // | -threshold | | | + // +------------------+--------------------+------------------------+ + + oc-ext:openconfig-version "0.4.0"; + + revision "2018-07-25" { + description + "Added wait-to-restore-time, hold-off-time, + relative-switch-threshold, relative-switch-threshold-offset, + forced-to-port, removed secondary-switch-hysteresis, and + edited the description of primary-switch-threshold, + secondary-switch-threshold, and primary-switch-hysteresis"; + reference "0.4.0"; + } + + revision "2017-09-08" { + description + "Correct bug with OSC interfaces"; + reference "0.3.1"; + } + + revision "2017-07-08" { + description + "Support multiple OCMs, add monitor port type + and refs to hw ports, "; + reference "0.3.0"; + } + + revision "2017-03-28" { + description + "Added min/max/avg stats, status for media channels, OCM, APS"; + reference "0.2.0"; + } + + revision "2016-08-05" { + description + "Initial public release"; + reference "0.1.0"; + } + + // extension statements + + // feature statements + + // identity statements + + identity APS_PATHS { + description + "Base identity for identifying the line paths on an + automatic protection switch"; + } + + identity PRIMARY { + base APS_PATHS; + description + "The primary line path connected to an automatic protection + switch port indicating the primary/preferred path"; + } + + identity SECONDARY { + base APS_PATHS; + description + "The secondary line path connected to an automatic protection + switch port indicating the secondary path"; + } + + // grouping statements + + grouping aps-input-port-config { + description + "Grouping for config related to unidirectional automatic + protection switch input ports"; + + leaf enabled { + type boolean; + default "true"; + description + "This leaf contains the configured, desired state of the + port. Disabling the port turns off alarm reporting for + the port"; + } + + leaf target-attenuation { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "Target attenuation of the variable optical attenuator + associated with the port in increments of 0.01 dB."; + } + } + + grouping aps-output-port-config { + description + "Grouping for config related to unidirectional automatic + protection switch output ports"; + + leaf target-attenuation { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "Target attenuation of the variable optical attenuator + associated with the port in increments of 0.01 dB"; + } + } + + grouping aps-input-port-state { + description + "Grouping for state related to unidirectional automatic + protection switch input ports"; + + leaf attenuation { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "The attenuation of the variable optical attenuator + associated with the port in increments of 0.01 dB."; + } + + container optical-power { + description + "The optical input power of this port in units of + 0.01dBm. Optical input power represents the signal + traversing from an external destination into the module. + The power is measured before any attenuation. If avg/min/max + statistics are not supported, the target is expected to + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + } + + grouping aps-output-port-state { + description + "Grouping for state related to unidirectional automatic + protection switch output ports"; + + leaf attenuation { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "The attenuation of the variable optical attenuator + associated with the port in increments of 0.01 dB"; + } + + container optical-power { + description + "The optical output power of this port in units of + 0.01dBm. Optical output power represents the signal + traversing from the module to an external destination. The + power is measured after any attenuation. If avg/min/max + statistics are not supported, the target is expected to + just supply the instant value"; + + uses oc-types:avg-min-max-instant-stats-precision2-dBm; + } + } + + grouping aps-ports { + description + "Top level grouping for automatic protection switch ports"; + + container line-primary-in { + description + "Container for information related to the line primary + input port"; + + container config { + description + "Configuration data for the line primary input port"; + + uses aps-input-port-config; + } + + container state { + + config false; + + description + "State data for the line primary input port"; + + uses aps-input-port-config; + uses aps-input-port-state; + } + + } + + container line-primary-out { + description + "Container for information related to the line primary + output port"; + + container config { + description + "Configuration data for the line primary output port"; + + uses aps-output-port-config; + } + + container state { + + config false; + + description + "State data for the line primary output port"; + + uses aps-output-port-config; + uses aps-output-port-state; + } + } + + container line-secondary-in { + description + "Container for information related to the line secondary + input port"; + + container config { + description + "Configuration data for the line secondary input port"; + + uses aps-input-port-config; + } + + container state { + + config false; + + description + "State data for the line secondary input port"; + + uses aps-input-port-config; + uses aps-input-port-state; + } + } + + container line-secondary-out { + description + "Container for information related to the line secondary + output port"; + + container config { + description + "Configuration data for the line secondary output port"; + + uses aps-output-port-config; + } + + container state { + + config false; + + description + "State data for the line secondary output port"; + + uses aps-output-port-config; + uses aps-output-port-state; + } + } + + container common-in { + description + "Container for information related to the line common + input port"; + + container config { + description + "Configuration data for the line common input port"; + + uses aps-input-port-config; + } + + container state { + + config false; + + description + "State data for the line common input port"; + + uses aps-input-port-config; + uses aps-input-port-state; + } + } + + container common-output { + description + "Container for information related to the line common + output port"; + + container config { + description + "Configuration data for the line common output port"; + + uses aps-output-port-config; + } + + container state { + + config false; + + description + "State data for the line common output port"; + + uses aps-output-port-config; + uses aps-output-port-state; + } + } + } + + grouping aps-config { + description + "Configuration data for automatic protection switch modules"; + + leaf name { + type leafref { + path "/oc-platform:components/oc-platform:component/" + + "oc-platform:name"; + } + description + "Reference to the component name (in the platform model) + corresponding to this automatic protection switch module + in the device"; + } + + leaf revertive { + type boolean; + description + "Revertive behavior of the module. If True, then + automatically revert after protection switch once the + fault is restored. This leaf is not valid when the + relative-switch-threshold is in effect"; + } + + leaf wait-to-restore-time { + type uint32; + units milliseconds; + description + "The time that must elapse before an APS path + that has recovered from an signal failure (SF) or signal + degradation (SD) condition can be used again to transport + the normal traffic signal. During this time period, an SF or + SD condition shall override the wait-to-restore time period. + This leaf can only take effect when the revertive leaf + equals true"; + } + + leaf hold-off-time { + type uint32; + units milliseconds; + description + "The time delay between the declaration of an SF or SD + condition and the initiation of the protection switching + algorithm"; + } + + leaf primary-switch-threshold { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The threshold at which the primary line port will switch to + the opposite line port in increments of 0.01 dBm. If the + hardware supports only one switch threshold for primary and + and secondary ports then it is recommended to set both + primary-switch-threshold and secondary-switch-threshold to + the same value to be explicit. When the relative switch + threshold is enabled, i.e. set to a non-zero value, the + primary switch threshold will be overridden"; + } + + leaf primary-switch-hysteresis { + type decimal64 { + fraction-digits 2; + } + units dB; + default 0; + description + "The delta in dB between the primary-switch-threshold + and the signal received on the primary APS_PATH before + initiating a switch from the secondary APS_PATH to the + primary APS_PATH, in order to prevent toggling between ports + when an input signal is very close to the threshold. A zero + value means the switch hysteresis is disabled."; + } + + leaf secondary-switch-threshold { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The threshold at which the secondary line port will switch to + the opposite line port in increments of 0.01 dBm. If the + hardware supports only one switch threshold for primary and + and secondary ports then it is recommended to set both + primary-switch-threshold and secondary-switch-threshold to + the same value to be explicit. When the relative switch + threshold is enabled, i.e. set to a non-zero value, the + secondary switch threshold will be overridden"; + } + + leaf relative-switch-threshold { + type decimal64 { + fraction-digits 2; + } + units dB; + default 0; + description + "The delta threshold in dB at which the current line port + will switch to the opposite line port. It can be set to + the value of 0dB. When set to 0dB, the threshold is ignored + and the system automatically applies the primary and + secondary switch thresholds. When set to a non-zero value, + it overrides the primary and secondary switch thresholds"; + } + + leaf relative-switch-threshold-offset { + type decimal64 { + fraction-digits 2; + } + units dB; + default 0; + description + "The offset of the relative switch threshold that compensates + the normal difference of receiving power between the primary + and secondary line ports. A negative offset corresponds to + the situation where the secondary line port receives a higher + power than the primary line port in normal condition, and a + positive offset means the opposite. The offset will only work + when the relative switch threshold is set to a non-zero + value"; + } + + leaf force-to-port { + type enumeration { + enum NONE { + description + "Do not force the switch to stay on any line port"; + } + enum PRIMARY { + description + "Force the switch to stay on the primary line port"; + } + enum SECONDARY { + description + "Force the switch to stay on the secondary line port"; + } + } + default NONE; + description + "Explicitly set the switch to stay on a port regardless of + its operational condition"; + } + } + + grouping aps-state { + description + "State data for automatic protection switch modules"; + + leaf active-path { + type identityref { + base APS_PATHS; + } + description + "Indicates which line path on the protection switch is + currently the active path connected to the common port"; + } + } + + grouping automatic-protection-switch-top { + description + "Top level grouping for automatic protection switch data"; + + container aps-modules { + description + "Enclosing container for list of automatic protection + switch modules"; + + list aps-module { + key "name"; + description + "List of automatic protection switch modules present + in the device"; + + leaf name { + type leafref { + path "../config/name"; + } + description + "Reference to the config name list key"; + } + + container config { + description + "Configuration data for an automatic protection + switch module"; + + uses aps-config; + } + + container state { + + config false; + + description + "Operational state data for an automatic protection + switch module"; + + uses aps-config; + uses aps-state; + } + + container ports { + description + "Top level grouping for automatic protection switch ports"; + + uses aps-ports; + } + } + } + } + + grouping transport-line-protection-top { + description + "Top level grouping for transport line protection data"; + + container aps { + description + "Top level grouping for automatic protection switch data"; + + uses automatic-protection-switch-top; + } + } + + // data definition statements + + uses transport-line-protection-top; + +} diff --git a/src/plugins/yang/openconfig/openconfig-transport-types.yang b/src/plugins/yang/openconfig/openconfig-transport-types.yang new file mode 100644 index 0000000..247b973 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-transport-types.yang @@ -0,0 +1,834 @@ +module openconfig-transport-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/transport-types"; + + prefix "oc-opt-types"; + + import openconfig-platform-types { prefix oc-platform-types; } + import openconfig-extensions { prefix oc-ext; } + import openconfig-types { prefix oc-types; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains general type definitions and identities + for optical transport models."; + + oc-ext:openconfig-version "0.6.0"; + + revision "2018-05-16" { + description + "Added interval,min,max time to interval stats."; + reference "0.6.0"; + } + + revision "2017-08-16" { + description + "Added ODU Cn protocol type"; + reference "0.5.0"; + } + + revision "2016-12-22" { + description + "Fixes and additions for terminal optics model"; + reference "0.4.0"; + } + + // typedef statements + + typedef frequency-type { + type uint64; + units "MHz"; + description + "Type for optical spectrum frequency values"; + } + + typedef admin-state-type { + type enumeration { + enum ENABLED { + description + "Sets the channel admin state to enabled"; + } + enum DISABLED { + description + "Sets the channel admin state to disabled"; + } + enum MAINT { + description + "Sets the channel to maintenance / diagnostic mode"; + } + } + description "Administrative state modes for + logical channels in the transponder model."; + } + + typedef loopback-mode-type { + type enumeration { + enum NONE { + description + "No loopback is applied"; + } + enum FACILITY { + description + "A loopback which directs traffic normally transmitted + on the port back to the device as if received on the same + port from an external source."; + } + enum TERMINAL { + description + "A loopback which directs traffic received from an external + source on the port back out the transmit side of the same + port."; + } + } + default NONE; + description + "Loopback modes for transponder logical channels"; + } + + // grouping statements + + grouping avg-min-max-instant-stats-precision2-ps-nm { + description + "Common grouping for recording picosecond per nanometer + values with 2 decimal precision. Values include the + instantaneous, average, minimum, and maximum statistics. + Statistics are computed and reported based on a moving time + interval (e.g., the last 30s). If supported by the device, + the time interval over which the statistics are computed, and + the times at which the minimum and maximum values occurred, + are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 2; + } + units ps-nm; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 2; + } + units ps-nm; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 2; + } + units ps-nm; + description + "The minimum value of the statistic over the time interval."; + } + + leaf max { + type decimal64 { + fraction-digits 2; + } + units ps-nm; + description + "The maximum value of the statistic over the time interval."; + } + + uses oc-types:stat-interval-state; + uses oc-types:min-max-time; + } + + grouping avg-min-max-instant-stats-precision2-ps { + description + "Common grouping for recording picosecond values with + 2 decimal precision. Values include the + instantaneous, average, minimum, and maximum statistics. + Statistics are computed and reported based on a moving time + interval (e.g., the last 30s). If supported by the device, + the time interval over which the statistics are computed, and + the times at which the minimum and maximum values occurred, + are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 2; + } + units ps; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 2; + } + units ps; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 2; + } + units ps; + description + "The minimum value of the statistic over the time interval."; + } + + leaf max { + type decimal64 { + fraction-digits 2; + } + units ps; + description + "The maximum value of the statistic over the time interval."; + } + + uses oc-types:stat-interval-state; + uses oc-types:min-max-time; + } + + grouping avg-min-max-instant-stats-precision2-ps2 { + description + "Common grouping for recording picosecond^2 values with + 2 decimal precision. Values include the + instantaneous, average, minimum, and maximum statistics. + Statistics are computed and reported based on a moving time + interval (e.g., the last 30s). If supported by the device, + the time interval over which the statistics are computed, and + the times at which the minimum and maximum values occurred, + are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 2; + } + units ps^2; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 2; + } + units ps^2; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 2; + } + units ps^2; + description + "The minimum value of the statistic over the time interval."; + } + + leaf max { + type decimal64 { + fraction-digits 2; + } + units ps^2; + description + "The maximum value of the statistic over the time + interval."; + } + + uses oc-types:stat-interval-state; + uses oc-types:min-max-time; + } + + grouping avg-min-max-instant-stats-precision18-ber { + description + "Common grouping for recording bit error rate (BER) values + with 18 decimal precision. Note that decimal64 supports + values as small as i x 10^-18 where i is an integer. Values + smaller than this should be reported as 0 to inidicate error + free or near error free performance. Values include the + instantaneous, average, minimum, and maximum statistics. + Statistics are computed and reported based on a moving time + interval (e.g., the last 30s). If supported by the device, + the time interval over which the statistics are computed, and + the times at which the minimum and maximum values occurred, + are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 18; + } + units bit-errors-per-second; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 18; + } + units bit-errors-per-second; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 18; + } + units bit-errors-per-second; + description + "The minimum value of the statistic over the time + interval."; + } + + leaf max { + type decimal64 { + fraction-digits 18; + } + units bit-errors-per-second; + description + "The maximum value of the statistic over the time + interval."; + } + + uses oc-types:stat-interval-state; + uses oc-types:min-max-time; + } + + // identity statements + + identity TRIBUTARY_PROTOCOL_TYPE { + description + "Base identity for protocol framing used by tributary + signals."; + } + + identity PROT_1GE { + base TRIBUTARY_PROTOCOL_TYPE; + description "1G Ethernet protocol"; + } + + identity PROT_OC48 { + base TRIBUTARY_PROTOCOL_TYPE; + description "OC48 protocol"; + } + + identity PROT_STM16 { + base TRIBUTARY_PROTOCOL_TYPE; + description "STM 16 protocol"; + } + + identity PROT_10GE_LAN { + base TRIBUTARY_PROTOCOL_TYPE; + description "10G Ethernet LAN protocol"; + } + + identity PROT_10GE_WAN { + base TRIBUTARY_PROTOCOL_TYPE; + description "10G Ethernet WAN protocol"; + } + + identity PROT_OC192 { + base TRIBUTARY_PROTOCOL_TYPE; + description "OC 192 (9.6GB) port protocol"; + } + + identity PROT_STM64 { + base TRIBUTARY_PROTOCOL_TYPE; + description "STM 64 protocol"; + } + + identity PROT_OTU2 { + base TRIBUTARY_PROTOCOL_TYPE; + description "OTU 2 protocol"; + } + + identity PROT_OTU2E { + base TRIBUTARY_PROTOCOL_TYPE; + description "OTU 2e protocol"; + } + + identity PROT_OTU1E { + base TRIBUTARY_PROTOCOL_TYPE; + description "OTU 1e protocol"; + } + + identity PROT_ODU2 { + base TRIBUTARY_PROTOCOL_TYPE; + description "ODU 2 protocol"; + } + + identity PROT_ODU2E { + base TRIBUTARY_PROTOCOL_TYPE; + description "ODU 2e protocol"; + } + + identity PROT_40GE { + base TRIBUTARY_PROTOCOL_TYPE; + description "40G Ethernet port protocol"; + } + + identity PROT_OC768 { + base TRIBUTARY_PROTOCOL_TYPE; + description "OC 768 protocol"; + } + + identity PROT_STM256 { + base TRIBUTARY_PROTOCOL_TYPE; + description "STM 256 protocol"; + } + + identity PROT_OTU3 { + base TRIBUTARY_PROTOCOL_TYPE; + description "OTU 3 protocol"; + } + + identity PROT_ODU3 { + base TRIBUTARY_PROTOCOL_TYPE; + description "ODU 3 protocol"; + } + + identity PROT_100GE { + base TRIBUTARY_PROTOCOL_TYPE; + description "100G Ethernet protocol"; + } + + identity PROT_100G_MLG { + base TRIBUTARY_PROTOCOL_TYPE; + description "100G MLG protocol"; + } + + identity PROT_OTU4 { + base TRIBUTARY_PROTOCOL_TYPE; + description "OTU4 signal protocol (112G) for transporting + 100GE signal"; + } + + identity PROT_OTUCN { + base TRIBUTARY_PROTOCOL_TYPE; + description "OTU Cn protocol"; + } + + identity PROT_ODUCN { + base TRIBUTARY_PROTOCOL_TYPE; + description "ODU Cn protocol"; + } + + identity PROT_ODU4 { + base TRIBUTARY_PROTOCOL_TYPE; + description "ODU 4 protocol"; + } + + identity TRANSCEIVER_FORM_FACTOR_TYPE { + description + "Base identity for identifying the type of pluggable optic + transceiver (i.e,. form factor) used in a port."; + } + + identity CFP { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "C form-factor pluggable, that can support up to a + 100 Gb/s signal with 10x10G or 4x25G physical channels"; + } + + identity CFP2 { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "1/2 C form-factor pluggable, that can support up to a + 200 Gb/s signal with 10x10G, 4x25G, or 8x25G physical + channels"; + } + + identity CFP2_ACO { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "CFP2 analog coherent optics transceiver, supporting + 100 Gb, 200Gb, and 250 Gb/s signal."; + } + + identity CFP4 { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "1/4 C form-factor pluggable, that can support up to a + 100 Gb/s signal with 10x10G or 4x25G physical channels"; + } + + identity QSFP { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "OriginalQuad Small Form-factor Pluggable transceiver that can + support 4x1G physical channels. Not commonly used."; + } + + identity QSFP_PLUS { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "Quad Small Form-factor Pluggable transceiver that can support + up to 4x10G physical channels."; + } + + identity QSFP28 { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "QSFP pluggable optic with support for up to 4x28G physical + channels"; + } + + identity CPAK { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "Cisco CPAK transceiver supporting 100 Gb/s."; + } + + identity SFP { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "Small form-factor pluggable transceiver supporting up to + 10 Gb/s signal"; + } + + identity SFP_PLUS { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "Enhanced small form-factor pluggable transceiver supporting + up to 16 Gb/s signals, including 10 GbE and OTU2"; + } + + identity XFP { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "10 Gigabit small form factor pluggable transceiver supporting + 10 GbE and OTU2"; + } + + identity X2 { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "10 Gigabit small form factor pluggable transceiver supporting + 10 GbE using a XAUI inerface and 4 data channels."; + } + + identity NON_PLUGGABLE { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "Represents a port that does not require a pluggable optic, + e.g., with on-board optics like COBO"; + } + + identity OTHER { + base TRANSCEIVER_FORM_FACTOR_TYPE; + description + "Represents a transceiver form factor not otherwise listed"; + } + + identity FIBER_CONNECTOR_TYPE { + description + "Type of optical fiber connector"; + } + + identity SC_CONNECTOR { + base FIBER_CONNECTOR_TYPE; + description + "SC type fiber connector"; + } + + identity LC_CONNECTOR { + base FIBER_CONNECTOR_TYPE; + description + "LC type fiber connector"; + } + + identity MPO_CONNECTOR { + base FIBER_CONNECTOR_TYPE; + description + "MPO (multi-fiber push-on/pull-off) type fiber connector + 1x12 fibers"; + } + + identity ETHERNET_PMD_TYPE { + description + "Ethernet compliance codes (PMD) supported by transceivers"; + } + + identity ETH_10GBASE_LRM { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 10GBASE_LRM"; + } + + identity ETH_10GBASE_LR { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 10GBASE_LR"; + } + + identity ETH_10GBASE_ZR { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 10GBASE_ZR"; + } + + identity ETH_10GBASE_ER { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 10GBASE_ER"; + } + + identity ETH_10GBASE_SR { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 10GBASE_SR"; + } + + identity ETH_40GBASE_CR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 40GBASE_CR4"; + } + + identity ETH_40GBASE_SR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 40GBASE_SR4"; + } + + identity ETH_40GBASE_LR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 40GBASE_LR4"; + } + + identity ETH_40GBASE_ER4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 40GBASE_ER4"; + } + + identity ETH_40GBASE_PSM4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 40GBASE_PSM4"; + } + + identity ETH_4X10GBASE_LR { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 4x10GBASE_LR"; + } + + identity ETH_4X10GBASE_SR { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 4x10GBASE_SR"; + } + + identity ETH_100G_AOC { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100G_AOC"; + } + + identity ETH_100G_ACC { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100G_ACC"; + } + + identity ETH_100GBASE_SR10 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_SR10"; + } + + identity ETH_100GBASE_SR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_SR4"; + } + + identity ETH_100GBASE_LR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_LR4"; + } + + identity ETH_100GBASE_ER4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_ER4"; + } + + identity ETH_100GBASE_CWDM4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_CWDM4"; + } + + identity ETH_100GBASE_CLR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_CLR4"; + } + + identity ETH_100GBASE_PSM4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_PSM4"; + } + + identity ETH_100GBASE_CR4 { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: 100GBASE_CR4"; + } + + identity ETH_UNDEFINED { + base ETHERNET_PMD_TYPE; + description "Ethernet compliance code: undefined"; + } + + identity SONET_APPLICATION_CODE { + description + "Supported SONET/SDH application codes"; + } + + identity VSR2000_3R2 { + base SONET_APPLICATION_CODE; + description + "SONET/SDH application code: VSR2000_3R2"; + } + + identity VSR2000_3R3 { + base SONET_APPLICATION_CODE; + description + "SONET/SDH application code: VSR2000_3R3"; + } + + identity VSR2000_3R5 { + base SONET_APPLICATION_CODE; + description + "SONET/SDH application code: VSR2000_3R5"; + } + + identity SONET_UNDEFINED { + base SONET_APPLICATION_CODE; + description + "SONET/SDH application code: undefined"; + } + + identity OTN_APPLICATION_CODE { + description + "Supported OTN application codes"; + } + + identity P1L1_2D1 { + base OTN_APPLICATION_CODE; + description + "OTN application code: P1L1_2D1"; + } + + identity P1S1_2D2 { + base OTN_APPLICATION_CODE; + description + "OTN application code: P1S1_2D2"; + } + + identity P1L1_2D2 { + base OTN_APPLICATION_CODE; + description + "OTN application code: P1L1_2D2"; + } + + identity OTN_UNDEFINED { + base OTN_APPLICATION_CODE; + description + "OTN application code: undefined"; + } + + identity TRIBUTARY_RATE_CLASS_TYPE { + description + "Rate of tributary signal _- identities will typically reflect + rounded bit rate."; + } + + identity TRIB_RATE_1G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "1G tributary signal rate"; + } + + identity TRIB_RATE_2.5G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "2.5G tributary signal rate"; + } + + identity TRIB_RATE_10G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "10G tributary signal rate"; + } + + identity TRIB_RATE_40G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "40G tributary signal rate"; + } + + identity TRIB_RATE_100G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "100G tributary signal rate"; + } + + identity TRIB_RATE_150G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "150G tributary signal rate"; + } + + identity TRIB_RATE_200G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "200G tributary signal rate"; + } + + identity TRIB_RATE_250G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "250G tributary signal rate"; + } + + identity TRIB_RATE_300G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "300G tributary signal rate"; + } + + identity TRIB_RATE_400G { + base TRIBUTARY_RATE_CLASS_TYPE; + description + "400G tributary signal rate"; + } + + identity LOGICAL_ELEMENT_PROTOCOL_TYPE { + description + "Type of protocol framing used on the logical channel or + tributary"; + } + + identity PROT_ETHERNET { + base LOGICAL_ELEMENT_PROTOCOL_TYPE; + description + "Ethernet protocol framing"; + } + + identity PROT_OTN { + base LOGICAL_ELEMENT_PROTOCOL_TYPE; + description + "OTN protocol framing"; + } + + identity OPTICAL_CHANNEL { + base oc-platform-types:OPENCONFIG_HARDWARE_COMPONENT; + description + "Optical channels act as carriers for transport traffic + directed over a line system. They are represented as + physical components in the physical inventory model."; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-types.yang b/src/plugins/yang/openconfig/openconfig-types.yang new file mode 100644 index 0000000..01713b3 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-types.yang @@ -0,0 +1,455 @@ +module openconfig-types { + yang-version "1"; + + namespace "http://openconfig.net/yang/openconfig-types"; + + prefix "oc-types"; + + // import statements + import openconfig-extensions { prefix oc-ext; } + + // meta + organization + "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module contains a set of general type definitions that + are used across OpenConfig models. It can be imported by modules + that make use of these types."; + + oc-ext:openconfig-version "0.5.0"; + + revision "2018-05-05" { + description + "Add grouping of min-max-time and + included them to all stats with min/max/avg"; + reference "0.5.0"; + } + + revision "2018-01-16" { + description + "Add interval to min/max/avg stats; add percentage stat"; + reference "0.4.0"; + } + + revision "2017-08-16" { + description + "Apply fix for ieetfloat32 length parameter"; + reference "0.3.3"; + } + + revision "2017-01-13" { + description + "Add ADDRESS_FAMILY identity"; + reference "0.3.2"; + } + + revision "2016-11-14" { + description + "Correct length of ieeefloat32"; + reference "0.3.1"; + } + + revision "2016-11-11" { + description + "Additional types - ieeefloat32 and routing-password"; + reference "0.3.0"; + } + + revision "2016-05-31" { + description + "OpenConfig public release"; + reference "0.2.0"; + } + + typedef percentage { + type uint8 { + range "0..100"; + } + description + "Integer indicating a percentage value"; + } + + typedef std-regexp { + type string; + description + "This type definition is a placeholder for a standard + definition of a regular expression that can be utilised in + OpenConfig models. Further discussion is required to + consider the type of regular expressions that are to be + supported. An initial proposal is POSIX compatible."; + } + + typedef timeticks64 { + type uint64; + description + "This type is based on the timeticks type defined in + RFC 6991, but with 64-bit width. It represents the time, + modulo 2^64, in hundredths of a second between two epochs."; + reference + "RFC 6991 - Common YANG Data Types"; + } + + typedef ieeefloat32 { + type binary { + length "4"; + } + description + "An IEEE 32-bit floating point number. The format of this number + is of the form: + 1-bit sign + 8-bit exponent + 23-bit fraction + The floating point value is calculated using: + (-1)**S * 2**(Exponent-127) * (1+Fraction)"; + } + + typedef routing-password { + type string; + description + "This type is indicative of a password that is used within + a routing protocol which can be returned in plain text to the + NMS by the local system. Such passwords are typically stored + as encrypted strings. Since the encryption used is generally + well known, it is possible to extract the original value from + the string - and hence this format is not considered secure. + Leaves specified with this type should not be modified by + the system, and should be returned to the end-user in plain + text. This type exists to differentiate passwords, which + may be sensitive, from other string leaves. It could, for + example, be used by the NMS to censor this data when + viewed by particular users."; + } + + typedef stat-interval { + type uint64; + units nanoseconds; + description + "A time interval over which a set of statistics is computed. + A common usage is to report the interval over which + avg/min/max stats are computed and reported."; + } + + grouping stat-interval-state { + description + "Reusable leaf definition for stats computation interval"; + + leaf interval { + type oc-types:stat-interval; + description + "If supported by the system, this reports the time interval + over which the min/max/average statistics are computed by + the system."; + } + } + + grouping min-max-time { + description + "Common grouping for recording the absolute time at which + the minimum and maximum values occurred in the statistics"; + + leaf min-time { + type oc-types:timeticks64; + description + "The absolute time at which the minimum value occurred. + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + + leaf max-time { + type oc-types:timeticks64; + description + "The absolute time at which the maximum value occurred. + The value is the timestamp in nanoseconds relative to + the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; + } + } + + grouping avg-min-max-stats-precision1 { + description + "Common nodes for recording average, minimum, and + maximum values for a statistic. These values all have + fraction-digits set to 1. Statistics are computed + and reported based on a moving time interval (e.g., the last + 30s). If supported by the device, the time interval over which + the statistics are computed is also reported."; + + leaf avg { + type decimal64 { + fraction-digits 1; + } + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 1; + } + description + "The minimum value of the statistic over the time + interval."; + } + + leaf max { + type decimal64 { + fraction-digits 1; + } + description + "The maximum value of the statitic over the time + interval."; + } + + uses stat-interval-state; + uses min-max-time; + } + + grouping avg-min-max-instant-stats-precision1 { + description + "Common grouping for recording an instantaneous statistic value + in addition to avg-min-max stats"; + + leaf instant { + type decimal64 { + fraction-digits 1; + } + description + "The instantaneous value of the statistic."; + } + + uses avg-min-max-stats-precision1; + } + + grouping avg-min-max-instant-stats-precision2-dB { + description + "Common grouping for recording dB values with 2 decimal + precision. Values include the instantaneous, average, + minimum, and maximum statistics. Statistics are computed + and reported based on a moving time interval (e.g., the last + 30s). If supported by the device, the time interval over which + the statistics are computed, and the times at which the minimum + and maximum values occurred, are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "The minimum value of the statistic over the time interval."; + } + + leaf max { + type decimal64 { + fraction-digits 2; + } + units dB; + description + "The maximum value of the statistic over the time + interval."; + } + + uses stat-interval-state; + uses min-max-time; + } + + grouping avg-min-max-instant-stats-precision2-dBm { + description + "Common grouping for recording dBm values with 2 decimal + precision. Values include the instantaneous, average, + minimum, and maximum statistics. Statistics are computed + and reported based on a moving time interval (e.g., the last + 30s). If supported by the device, the time interval over which + the statistics are computed, and the times at which the minimum + and maximum values occurred, are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The minimum value of the statistic over the time + interval."; + } + + leaf max { + type decimal64 { + fraction-digits 2; + } + units dBm; + description + "The maximum value of the statistic over the time interval."; + } + + uses stat-interval-state; + uses min-max-time; + } + + grouping avg-min-max-instant-stats-precision2-mA { + description + "Common grouping for recording mA values with 2 decimal + precision. Values include the instantaneous, average, + minimum, and maximum statistics. Statistics are computed + and reported based on a moving time interval (e.g., the last + 30s). If supported by the device, the time interval over which + the statistics are computed, and the times at which the minimum + and maximum values occurred, are also reported."; + + leaf instant { + type decimal64 { + fraction-digits 2; + } + units mA; + description + "The instantaneous value of the statistic."; + } + + leaf avg { + type decimal64 { + fraction-digits 2; + } + units mA; + description + "The arithmetic mean value of the statistic over the + time interval."; + } + + leaf min { + type decimal64 { + fraction-digits 2; + } + units mA; + description + "The minimum value of the statistic over the time + interval."; + } + + leaf max { + type decimal64 { + fraction-digits 2; + } + units mA; + description + "The maximum value of the statistic over the time + interval."; + } + + uses stat-interval-state; + uses min-max-time; + } + + grouping avg-min-max-instant-stats-pct { + description + "Common grouping for percentage statistics. + Values include the instantaneous, average, + minimum, and maximum statistics. Statistics are computed + and reported based on a moving time interval (e.g., the last + 30s). If supported by the device, the time interval over which + the statistics are computed, and the times at which the minimum + and maximum values occurred, are also reported."; + + leaf instant { + type oc-types:percentage; + description + "The instantaneous percentage value."; + } + + leaf avg { + type oc-types:percentage; + description + "The arithmetic mean value of the percentage measure of the + statistic over the time interval."; + } + + leaf min { + type oc-types:percentage; + description + "The minimum value of the percentage measure of the + statistic over the time interval."; + } + + leaf max { + type oc-types:percentage; + description + "The maximum value of the percentage measure of the + statistic over the time interval."; + } + + uses stat-interval-state; + uses min-max-time; + } + + identity ADDRESS_FAMILY { + description + "A base identity for all address families"; + } + + identity IPV4 { + base ADDRESS_FAMILY; + description + "The IPv4 address family"; + } + + identity IPV6 { + base ADDRESS_FAMILY; + description + "The IPv6 address family"; + } + + identity MPLS { + base ADDRESS_FAMILY; + description + "The MPLS address family"; + } + + identity L2_ETHERNET { + base ADDRESS_FAMILY; + description + "The 802.3 Ethernet address family"; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-vlan-types.yang b/src/plugins/yang/openconfig/openconfig-vlan-types.yang new file mode 100644 index 0000000..6d9ab55 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-vlan-types.yang @@ -0,0 +1,195 @@ +module openconfig-vlan-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/vlan-types"; + + prefix "oc-vlan-types"; + + // import some basic types + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module defines configuration and state variables for VLANs, + in addition to VLAN parameters associated with interfaces"; + + oc-ext:openconfig-version "3.0.0"; + + revision "2018-02-14" { + description + "Fix bug with name of 802.1ad identity."; + reference "3.0.0"; + } + + revision "2017-07-14" { + description + "Move top-level vlan data to network-instance; Update + identities to comply to style guide; fixed pattern + quoting; corrected trunk vlan types; added TPID config to + base interface."; + reference "2.0.0"; + } + + revision "2016-05-26" { + description + "OpenConfig public release"; + reference "1.0.2"; + } + + // extension statements + + // feature statements + + // identity statements + + identity TPID_TYPES { + description + "Base identity for TPID values that can override the VLAN + ethertype value"; + } + + identity TPID_0X8100 { + base TPID_TYPES; + description + "Default TPID value for 802.1q single-tagged VLANs."; + } + + identity TPID_0X88A8 { + base TPID_TYPES; + description + "TPID value for 802.1ad provider bridging, QinQ or + stacked VLANs."; + } + + identity TPID_0X9100 { + base TPID_TYPES; + description + "Alternate TPID value"; + } + + identity TPID_0X9200 { + base TPID_TYPES; + description + "Alternate TPID value"; + } + + // typedef statements + + // TODO: typedefs should be defined in a vlan-types.yang file. + typedef vlan-id { + type uint16 { + range 1..4094; + } + description + "Type definition representing a single-tagged VLAN"; + } + + typedef vlan-range { + type string { + // range specified as [lower]..[upper] + pattern '^(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])\.\.(409[0-4]|' + + '40[0-8][0-9]|[1-3][0-9]{3}|[1-9][0-9]{1,2}|' + + '[1-9])$'; + } + description + "Type definition representing a range of single-tagged + VLANs. A range is specified as x..y where x and y are + valid VLAN IDs (1 <= vlan-id <= 4094). The range is + assumed to be inclusive, such that any VLAN-ID matching + x <= VLAN-ID <= y falls within the range."; + } + + typedef qinq-id { + type string { + pattern + '^(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])\.' + + '((409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])|\*)$'; + } + description + "Type definition representing a single double-tagged/QinQ VLAN + identifier. The format of a QinQ VLAN-ID is x.y where X is the + 'outer' VLAN identifier, and y is the 'inner' VLAN identifier. + Both x and y must be valid VLAN IDs (1 <= vlan-id <= 4094) + with the exception that y may be equal to a wildcard (*). In + cases where y is set to the wildcard, this represents all inner + VLAN identifiers where the outer VLAN identifier is equal to + x"; + } + + typedef qinq-id-range { + type union { + type string { + // match cases where the range is specified as x..y.z + pattern + '^(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])\.\.' + + '(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])\.' + + '((409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])|\*)$'; + } + type string { + // match cases where the range is specified as x.y..z + pattern + '^(\*|(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9]))\.' + + '(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])\.\.' + + '(409[0-4]|40[0-8][0-9]|[1-3][0-9]{3}|' + + '[1-9][0-9]{1,2}|[1-9])$'; + } + } + description + "A type definition representing a range of double-tagged/QinQ + VLAN identifiers. The format of a QinQ VLAN-ID range can be + specified in three formats. Where the range is outer VLAN IDs + the range is specified as x..y.z. In this case outer VLAN + identifiers meeting the criteria x <= outer-vlan-id <= y are + accepted iff the inner VLAN-ID is equal to y - or any inner-tag + if the wildcard is specified. Alternatively the range can be + specified as x.y..z. In this case only VLANs with an + outer-vlan-id qual to x are accepted (x may again be the + wildcard). Inner VLANs are accepted if they meet the inequality + y <= inner-vlan-id <= z."; + } + + typedef vlan-mode-type { + type enumeration { + enum ACCESS { + description "Access mode VLAN interface (No 802.1q header)"; + } + enum TRUNK { + description "Trunk mode VLAN interface"; + } + } + description + "VLAN interface mode (trunk or access)"; + } + + typedef vlan-ref { + type union { + type vlan-id; + type string; + // TODO: string should be changed to leafref to reference + // an existing VLAN. this is not allowed in YANG 1.0 but + // is expected to be in YANG 1.1. + // type leafref { + // path "vlan:vlans/vlan:vlan/vlan:config/vlan:name"; + // } + } + description + "Reference to a VLAN by name or id"; + } + +} diff --git a/src/plugins/yang/openconfig/openconfig-vlan.yang b/src/plugins/yang/openconfig/openconfig-vlan.yang new file mode 100644 index 0000000..97348c0 --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-vlan.yang @@ -0,0 +1,438 @@ +module openconfig-vlan { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/vlan"; + + prefix "oc-vlan"; + + // import some basic types + import openconfig-vlan-types { prefix oc-vlan-types; } + import openconfig-interfaces { prefix oc-if; } + import openconfig-if-ethernet { prefix oc-eth; } + import openconfig-if-aggregate { prefix oc-lag; } + import iana-if-type { prefix ift; } + import openconfig-extensions { prefix oc-ext; } + + // meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + netopenconfig@googlegroups.com"; + + description + "This module defines configuration and state variables for VLANs, + in addition to VLAN parameters associated with interfaces"; + + oc-ext:openconfig-version "3.0.1"; + + revision "2018-06-05" { + description + "Fix bugs in when statements."; + reference "3.0.1"; + } + + revision "2018-02-14" { + description + "Fix bug with name of 802.1ad identity."; + reference "3.0.0"; + } + + revision "2017-07-14" { + description + "Move top-level vlan data to network-instance; Update + identities to comply to style guide; fixed pattern + quoting; corrected trunk vlan types; added TPID config to + base interface."; + reference "2.0.0"; + } + + revision "2016-05-26" { + description + "OpenConfig public release"; + reference "1.0.2"; + } + + // grouping statements + + grouping vlan-config { + description "VLAN configuration container."; + + leaf vlan-id { + type oc-vlan-types:vlan-id; + description "Interface VLAN id."; + } + + leaf name { + type string; + description "Interface VLAN name."; + } + + leaf status { + type enumeration { + enum ACTIVE { + description "VLAN is active"; + } + enum SUSPENDED { + description "VLAN is inactive / suspended"; + } + } + default ACTIVE; + description "Admin state of the VLAN"; + } + + } + + grouping vlan-state { + description "State variables for VLANs"; + + // placeholder + + } + + grouping vlan-tpid-config { + description + "TPID configuration for dot1q-enabled interfaces"; + + leaf tpid { + type identityref { + base oc-vlan-types:TPID_TYPES; + } + default oc-vlan-types:TPID_0X8100; + description + "Optionally set the tag protocol identifier field (TPID) that + is accepted on the VLAN"; + } + } + + grouping vlan-tpid-state { + description + "TPID opstate for dot1q-enabled interfaces"; + + // placeholder + + } + + grouping vlan-members-state { + description + "List of interfaces / subinterfaces belonging to the VLAN."; + + container members { + description + "Enclosing container for list of member interfaces"; + + list member { + config false; + description + "List of references to interfaces / subinterfaces + associated with the VLAN."; + + uses oc-if:base-interface-ref-state; + } + } + } + + grouping vlan-switched-config { + description + "VLAN related configuration that is part of the physical + Ethernet interface."; + + leaf interface-mode { + type oc-vlan-types:vlan-mode-type; + description + "Set the interface to access or trunk mode for + VLANs"; + } + + leaf native-vlan { + when "../interface-mode = 'TRUNK'" { + description + "Native VLAN is valid for trunk mode interfaces"; + } + type oc-vlan-types:vlan-id; + description + "Set the native VLAN id for untagged frames arriving on + a trunk interface. Tagged frames sent on an interface + configured with a native VLAN should have their tags + stripped prior to transmission. This configuration is only + valid on a trunk interface."; + } + + leaf access-vlan { + when "../interface-mode = 'ACCESS'" { + description + "Access VLAN assigned to the interfaces"; + } + type oc-vlan-types:vlan-id; + description + "Assign the access vlan to the access port."; + } + + leaf-list trunk-vlans { + when "../interface-mode = 'TRUNK'" { + description + "Allowed VLANs may be specified for trunk mode + interfaces."; + } + type union { + type oc-vlan-types:vlan-id; + type oc-vlan-types:vlan-range; + } + description + "Specify VLANs, or ranges thereof, that the interface may + carry when in trunk mode. If not specified, all VLANs are + allowed on the interface. Ranges are specified in the form + x..y, where x