removed dpdk22 files

1 files changed, 0 insertions, 1745 deletions

diff --git a/src/dpdk22/drivers/net/e1000/em_ethdev.c b/src/dpdk22/drivers/net/e1000/em_ethdev.c
deleted file mode 100644
index 66e89933..00000000
--- a/src/dpdk22/drivers/net/e1000/em_ethdev.c
+++ /dev/null
@@ -1,1745 +0,0 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <sys/queue.h>
-#include <stdio.h>
-#include <errno.h>
-#include <stdint.h>
-#include <stdarg.h>
-
-#include <rte_common.h>
-#include <rte_interrupts.h>
-#include <rte_byteorder.h>
-#include <rte_log.h>
-#include <rte_debug.h>
-#include <rte_pci.h>
-#include <rte_ether.h>
-#include <rte_ethdev.h>
-#include <rte_memory.h>
-#include <rte_memzone.h>
-#include <rte_eal.h>
-#include <rte_atomic.h>
-#include <rte_malloc.h>
-#include <rte_dev.h>
-
-#include "e1000_logs.h"
-#include "base/e1000_api.h"
-#include "e1000_ethdev.h"
-
-#define EM_EIAC			0x000DC
-
-#define PMD_ROUNDUP(x,y)	(((x) + (y) - 1)/(y) * (y))
-
-
-static int eth_em_configure(struct rte_eth_dev *dev);
-static int eth_em_start(struct rte_eth_dev *dev);
-static void eth_em_stop(struct rte_eth_dev *dev);
-static void eth_em_close(struct rte_eth_dev *dev);
-static void eth_em_promiscuous_enable(struct rte_eth_dev *dev);
-static void eth_em_promiscuous_disable(struct rte_eth_dev *dev);
-static void eth_em_allmulticast_enable(struct rte_eth_dev *dev);
-static void eth_em_allmulticast_disable(struct rte_eth_dev *dev);
-static int eth_em_link_update(struct rte_eth_dev *dev,
-				int wait_to_complete);
-static void eth_em_stats_get(struct rte_eth_dev *dev,
-				struct rte_eth_stats *rte_stats);
-static void eth_em_stats_reset(struct rte_eth_dev *dev);
-static void eth_em_infos_get(struct rte_eth_dev *dev,
-				struct rte_eth_dev_info *dev_info);
-static int eth_em_flow_ctrl_get(struct rte_eth_dev *dev,
-				struct rte_eth_fc_conf *fc_conf);
-static int eth_em_flow_ctrl_set(struct rte_eth_dev *dev,
-				struct rte_eth_fc_conf *fc_conf);
-static int eth_em_interrupt_setup(struct rte_eth_dev *dev);
-static int eth_em_rxq_interrupt_setup(struct rte_eth_dev *dev);
-static int eth_em_interrupt_get_status(struct rte_eth_dev *dev);
-static int eth_em_interrupt_action(struct rte_eth_dev *dev);
-static void eth_em_interrupt_handler(struct rte_intr_handle *handle,
-							void *param);
-
-static int em_hw_init(struct e1000_hw *hw);
-static int em_hardware_init(struct e1000_hw *hw);
-static void em_hw_control_acquire(struct e1000_hw *hw);
-static void em_hw_control_release(struct e1000_hw *hw);
-static void em_init_manageability(struct e1000_hw *hw);
-static void em_release_manageability(struct e1000_hw *hw);
-
-static int eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
-
-static int eth_em_vlan_filter_set(struct rte_eth_dev *dev,
-		uint16_t vlan_id, int on);
-static void eth_em_vlan_offload_set(struct rte_eth_dev *dev, int mask);
-static void em_vlan_hw_filter_enable(struct rte_eth_dev *dev);
-static void em_vlan_hw_filter_disable(struct rte_eth_dev *dev);
-static void em_vlan_hw_strip_enable(struct rte_eth_dev *dev);
-static void em_vlan_hw_strip_disable(struct rte_eth_dev *dev);
-
-/*
-static void eth_em_vlan_filter_set(struct rte_eth_dev *dev,
-					uint16_t vlan_id, int on);
-*/
-
-static int eth_em_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id);
-static int eth_em_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
-static void em_lsc_intr_disable(struct e1000_hw *hw);
-static void em_rxq_intr_enable(struct e1000_hw *hw);
-static void em_rxq_intr_disable(struct e1000_hw *hw);
-
-static int eth_em_led_on(struct rte_eth_dev *dev);
-static int eth_em_led_off(struct rte_eth_dev *dev);
-
-static int em_get_rx_buffer_size(struct e1000_hw *hw);
-static void eth_em_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
-		uint32_t index, uint32_t pool);
-static void eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index);
-
-static int eth_em_set_mc_addr_list(struct rte_eth_dev *dev,
-				   struct ether_addr *mc_addr_set,
-				   uint32_t nb_mc_addr);
-
-#define EM_FC_PAUSE_TIME 0x0680
-#define EM_LINK_UPDATE_CHECK_TIMEOUT  90  /* 9s */
-#define EM_LINK_UPDATE_CHECK_INTERVAL 100 /* ms */
-
-static enum e1000_fc_mode em_fc_setting = e1000_fc_full;
-
-/*
- * The set of PCI devices this driver supports
- */
-static const struct rte_pci_id pci_id_em_map[] = {
-
-#define RTE_PCI_DEV_ID_DECL_EM(vend, dev) {RTE_PCI_DEVICE(vend, dev)},
-#include "rte_pci_dev_ids.h"
-
-{0},
-};
-
-static const struct eth_dev_ops eth_em_ops = {
-	.dev_configure        = eth_em_configure,
-	.dev_start            = eth_em_start,
-	.dev_stop             = eth_em_stop,
-	.dev_close            = eth_em_close,
-	.promiscuous_enable   = eth_em_promiscuous_enable,
-	.promiscuous_disable  = eth_em_promiscuous_disable,
-	.allmulticast_enable  = eth_em_allmulticast_enable,
-	.allmulticast_disable = eth_em_allmulticast_disable,
-	.link_update          = eth_em_link_update,
-	.stats_get            = eth_em_stats_get,
-	.stats_reset          = eth_em_stats_reset,
-	.dev_infos_get        = eth_em_infos_get,
-	.mtu_set              = eth_em_mtu_set,
-	.vlan_filter_set      = eth_em_vlan_filter_set,
-	.vlan_offload_set     = eth_em_vlan_offload_set,
-	.rx_queue_setup       = eth_em_rx_queue_setup,
-	.rx_queue_release     = eth_em_rx_queue_release,
-	.rx_queue_count       = eth_em_rx_queue_count,
-	.rx_descriptor_done   = eth_em_rx_descriptor_done,
-	.tx_queue_setup       = eth_em_tx_queue_setup,
-	.tx_queue_release     = eth_em_tx_queue_release,
-	.rx_queue_intr_enable = eth_em_rx_queue_intr_enable,
-	.rx_queue_intr_disable = eth_em_rx_queue_intr_disable,
-	.dev_led_on           = eth_em_led_on,
-	.dev_led_off          = eth_em_led_off,
-	.flow_ctrl_get        = eth_em_flow_ctrl_get,
-	.flow_ctrl_set        = eth_em_flow_ctrl_set,
-	.mac_addr_add         = eth_em_rar_set,
-	.mac_addr_remove      = eth_em_rar_clear,
-	.set_mc_addr_list     = eth_em_set_mc_addr_list,
-	.rxq_info_get         = em_rxq_info_get,
-	.txq_info_get         = em_txq_info_get,
-};
-
-/**
- * Atomically reads the link status information from global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_em_dev_atomic_read_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = link;
-	struct rte_eth_link *src = &(dev->data->dev_link);
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param dev
- *   - Pointer to the structure rte_eth_dev to read from.
- *   - Pointer to the buffer to be saved with the link status.
- *
- * @return
- *   - On success, zero.
- *   - On failure, negative value.
- */
-static inline int
-rte_em_dev_atomic_write_link_status(struct rte_eth_dev *dev,
-				struct rte_eth_link *link)
-{
-	struct rte_eth_link *dst = &(dev->data->dev_link);
-	struct rte_eth_link *src = link;
-
-	if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
-					*(uint64_t *)src) == 0)
-		return -1;
-
-	return 0;
-}
-
-static int
-eth_em_dev_init(struct rte_eth_dev *eth_dev)
-{
-	struct rte_pci_device *pci_dev;
-	struct e1000_adapter *adapter =
-		E1000_DEV_PRIVATE(eth_dev->data->dev_private);
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
-	struct e1000_vfta * shadow_vfta =
-		E1000_DEV_PRIVATE_TO_VFTA(eth_dev->data->dev_private);
-
-	pci_dev = eth_dev->pci_dev;
-
-	eth_dev->dev_ops = &eth_em_ops;
-	eth_dev->rx_pkt_burst = (eth_rx_burst_t)&eth_em_recv_pkts;
-	eth_dev->tx_pkt_burst = (eth_tx_burst_t)&eth_em_xmit_pkts;
-
-	/* for secondary processes, we don't initialise any further as primary
-	 * has already done this work. Only check we don't need a different
-	 * RX function */
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY){
-		if (eth_dev->data->scattered_rx)
-			eth_dev->rx_pkt_burst =
-				(eth_rx_burst_t)&eth_em_recv_scattered_pkts;
-		return 0;
-	}
-
-	rte_eth_copy_pci_info(eth_dev, pci_dev);
-
-	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
-	hw->device_id = pci_dev->id.device_id;
-	adapter->stopped = 0;
-
-	/* For ICH8 support we'll need to map the flash memory BAR */
-
-	if (e1000_setup_init_funcs(hw, TRUE) != E1000_SUCCESS ||
-			em_hw_init(hw) != 0) {
-		PMD_INIT_LOG(ERR, "port_id %d vendorID=0x%x deviceID=0x%x: "
-			"failed to init HW",
-			eth_dev->data->port_id, pci_dev->id.vendor_id,
-			pci_dev->id.device_id);
-		return -(ENODEV);
-	}
-
-	/* Allocate memory for storing MAC addresses */
-	eth_dev->data->mac_addrs = rte_zmalloc("e1000", ETHER_ADDR_LEN *
-			hw->mac.rar_entry_count, 0);
-	if (eth_dev->data->mac_addrs == NULL) {
-		PMD_INIT_LOG(ERR, "Failed to allocate %d bytes needed to "
-			"store MAC addresses",
-			ETHER_ADDR_LEN * hw->mac.rar_entry_count);
-		return -(ENOMEM);
-	}
-
-	/* Copy the permanent MAC address */
-	ether_addr_copy((struct ether_addr *) hw->mac.addr,
-		eth_dev->data->mac_addrs);
-
-	/* initialize the vfta */
-	memset(shadow_vfta, 0, sizeof(*shadow_vfta));
-
-	PMD_INIT_LOG(DEBUG, "port_id %d vendorID=0x%x deviceID=0x%x",
-		     eth_dev->data->port_id, pci_dev->id.vendor_id,
-		     pci_dev->id.device_id);
-
-	rte_intr_callback_register(&(pci_dev->intr_handle),
-		eth_em_interrupt_handler, (void *)eth_dev);
-
-	return (0);
-}
-
-static int
-eth_em_dev_uninit(struct rte_eth_dev *eth_dev)
-{
-	struct rte_pci_device *pci_dev;
-	struct e1000_adapter *adapter =
-		E1000_DEV_PRIVATE(eth_dev->data->dev_private);
-
-	PMD_INIT_FUNC_TRACE();
-
-	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
-		return -EPERM;
-
-	pci_dev = eth_dev->pci_dev;
-
-	if (adapter->stopped == 0)
-		eth_em_close(eth_dev);
-
-	eth_dev->dev_ops = NULL;
-	eth_dev->rx_pkt_burst = NULL;
-	eth_dev->tx_pkt_burst = NULL;
-
-	rte_free(eth_dev->data->mac_addrs);
-	eth_dev->data->mac_addrs = NULL;
-
-	/* disable uio intr before callback unregister */
-	rte_intr_disable(&(pci_dev->intr_handle));
-	rte_intr_callback_unregister(&(pci_dev->intr_handle),
-		eth_em_interrupt_handler, (void *)eth_dev);
-
-	return 0;
-}
-
-static struct eth_driver rte_em_pmd = {
-	.pci_drv = {
-		.name = "rte_em_pmd",
-		.id_table = pci_id_em_map,
-		.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC |
-			RTE_PCI_DRV_DETACHABLE,
-	},
-	.eth_dev_init = eth_em_dev_init,
-	.eth_dev_uninit = eth_em_dev_uninit,
-	.dev_private_size = sizeof(struct e1000_adapter),
-};
-
-static int
-rte_em_pmd_init(const char *name __rte_unused, const char *params __rte_unused)
-{
-	rte_eth_driver_register(&rte_em_pmd);
-	return 0;
-}
-
-static int
-em_hw_init(struct e1000_hw *hw)
-{
-	int diag;
-
-	diag = hw->mac.ops.init_params(hw);
-	if (diag != 0) {
-		PMD_INIT_LOG(ERR, "MAC Initialization Error");
-		return diag;
-	}
-	diag = hw->nvm.ops.init_params(hw);
-	if (diag != 0) {
-		PMD_INIT_LOG(ERR, "NVM Initialization Error");
-		return diag;
-	}
-	diag = hw->phy.ops.init_params(hw);
-	if (diag != 0) {
-		PMD_INIT_LOG(ERR, "PHY Initialization Error");
-		return diag;
-	}
-	(void) e1000_get_bus_info(hw);
-
-	hw->mac.autoneg = 1;
-	hw->phy.autoneg_wait_to_complete = 0;
-	hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
-
-	e1000_init_script_state_82541(hw, TRUE);
-	e1000_set_tbi_compatibility_82543(hw, TRUE);
-
-	/* Copper options */
-	if (hw->phy.media_type == e1000_media_type_copper) {
-		hw->phy.mdix = 0; /* AUTO_ALL_MODES */
-		hw->phy.disable_polarity_correction = 0;
-		hw->phy.ms_type = e1000_ms_hw_default;
-	}
-
-	/*
-	 * Start from a known state, this is important in reading the nvm
-	 * and mac from that.
-	 */
-	e1000_reset_hw(hw);
-
-	/* Make sure we have a good EEPROM before we read from it */
-	if (e1000_validate_nvm_checksum(hw) < 0) {
-		/*
-		 * Some PCI-E parts fail the first check due to
-		 * the link being in sleep state, call it again,
-		 * if it fails a second time its a real issue.
-		 */
-		diag = e1000_validate_nvm_checksum(hw);
-		if (diag < 0) {
-			PMD_INIT_LOG(ERR, "EEPROM checksum invalid");
-			goto error;
-		}
-	}
-
-	/* Read the permanent MAC address out of the EEPROM */
-	diag = e1000_read_mac_addr(hw);
-	if (diag != 0) {
-		PMD_INIT_LOG(ERR, "EEPROM error while reading MAC address");
-		goto error;
-	}
-
-	/* Now initialize the hardware */
-	diag = em_hardware_init(hw);
-	if (diag != 0) {
-		PMD_INIT_LOG(ERR, "Hardware initialization failed");
-		goto error;
-	}
-
-	hw->mac.get_link_status = 1;
-
-	/* Indicate SOL/IDER usage */
-	diag = e1000_check_reset_block(hw);
-	if (diag < 0) {
-		PMD_INIT_LOG(ERR, "PHY reset is blocked due to "
-			"SOL/IDER session");
-	}
-	return (0);
-
-error:
-	em_hw_control_release(hw);
-	return (diag);
-}
-
-static int
-eth_em_configure(struct rte_eth_dev *dev)
-{
-	struct e1000_interrupt *intr =
-		E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
-
-	PMD_INIT_FUNC_TRACE();
-	intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
-	PMD_INIT_FUNC_TRACE();
-
-	return (0);
-}
-
-static void
-em_set_pba(struct e1000_hw *hw)
-{
-	uint32_t pba;
-
-	/*
-	 * Packet Buffer Allocation (PBA)
-	 * Writing PBA sets the receive portion of the buffer
-	 * the remainder is used for the transmit buffer.
-	 * Devices before the 82547 had a Packet Buffer of 64K.
-	 * After the 82547 the buffer was reduced to 40K.
-	 */
-	switch (hw->mac.type) {
-		case e1000_82547:
-		case e1000_82547_rev_2:
-		/* 82547: Total Packet Buffer is 40K */
-			pba = E1000_PBA_22K; /* 22K for Rx, 18K for Tx */
-			break;
-		case e1000_82571:
-		case e1000_82572:
-		case e1000_80003es2lan:
-			pba = E1000_PBA_32K; /* 32K for Rx, 16K for Tx */
-			break;
-		case e1000_82573: /* 82573: Total Packet Buffer is 32K */
-			pba = E1000_PBA_12K; /* 12K for Rx, 20K for Tx */
-			break;
-		case e1000_82574:
-		case e1000_82583:
-			pba = E1000_PBA_20K; /* 20K for Rx, 20K for Tx */
-			break;
-		case e1000_ich8lan:
-			pba = E1000_PBA_8K;
-			break;
-		case e1000_ich9lan:
-		case e1000_ich10lan:
-			pba = E1000_PBA_10K;
-			break;
-		case e1000_pchlan:
-		case e1000_pch2lan:
-			pba = E1000_PBA_26K;
-			break;
-		default:
-			pba = E1000_PBA_40K; /* 40K for Rx, 24K for Tx */
-	}
-
-	E1000_WRITE_REG(hw, E1000_PBA, pba);
-}
-
-static int
-eth_em_start(struct rte_eth_dev *dev)
-{
-	struct e1000_adapter *adapter =
-		E1000_DEV_PRIVATE(dev->data->dev_private);
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
-	int ret, mask;
-	uint32_t intr_vector = 0;
-
-	PMD_INIT_FUNC_TRACE();
-
-	eth_em_stop(dev);
-
-	e1000_power_up_phy(hw);
-
-	/* Set default PBA value */
-	em_set_pba(hw);
-
-	/* Put the address into the Receive Address Array */
-	e1000_rar_set(hw, hw->mac.addr, 0);
-
-	/*
-	 * With the 82571 adapter, RAR[0] may be overwritten
-	 * when the other port is reset, we make a duplicate
-	 * in RAR[14] for that eventuality, this assures
-	 * the interface continues to function.
-	 */
-	if (hw->mac.type == e1000_82571) {
-		e1000_set_laa_state_82571(hw, TRUE);
-		e1000_rar_set(hw, hw->mac.addr, E1000_RAR_ENTRIES - 1);
-	}
-
-	/* Initialize the hardware */
-	if (em_hardware_init(hw)) {
-		PMD_INIT_LOG(ERR, "Unable to initialize the hardware");
-		return (-EIO);
-	}
-
-	E1000_WRITE_REG(hw, E1000_VET, ETHER_TYPE_VLAN);
-
-	/* Configure for OS presence */
-	em_init_manageability(hw);
-
-	if (dev->data->dev_conf.intr_conf.rxq != 0) {
-		intr_vector = dev->data->nb_rx_queues;
-		if (rte_intr_efd_enable(intr_handle, intr_vector))
-			return -1;
-	}
-
-	if (rte_intr_dp_is_en(intr_handle)) {
-		intr_handle->intr_vec =
-			rte_zmalloc("intr_vec",
-					dev->data->nb_rx_queues * sizeof(int), 0);
-		if (intr_handle->intr_vec == NULL) {
-			PMD_INIT_LOG(ERR, "Failed to allocate %d rx_queues"
-						" intr_vec\n", dev->data->nb_rx_queues);
-			return -ENOMEM;
-		}
-
-		/* enable rx interrupt */
-		em_rxq_intr_enable(hw);
-	}
-
-	eth_em_tx_init(dev);
-
-	ret = eth_em_rx_init(dev);
-	if (ret) {
-		PMD_INIT_LOG(ERR, "Unable to initialize RX hardware");
-		em_dev_clear_queues(dev);
-		return ret;
-	}
-
-	e1000_clear_hw_cntrs_base_generic(hw);
-
-	mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK | \
-			ETH_VLAN_EXTEND_MASK;
-	eth_em_vlan_offload_set(dev, mask);
-
-	/* Set Interrupt Throttling Rate to maximum allowed value. */
-	E1000_WRITE_REG(hw, E1000_ITR, UINT16_MAX);
-
-	/* Setup link speed and duplex */
-	switch (dev->data->dev_conf.link_speed) {
-	case ETH_LINK_SPEED_AUTONEG:
-		if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
-			hw->phy.autoneg_advertised = E1000_ALL_SPEED_DUPLEX;
-		else if (dev->data->dev_conf.link_duplex ==
-					ETH_LINK_HALF_DUPLEX)
-			hw->phy.autoneg_advertised = E1000_ALL_HALF_DUPLEX;
-		else if (dev->data->dev_conf.link_duplex ==
-					ETH_LINK_FULL_DUPLEX)
-			hw->phy.autoneg_advertised = E1000_ALL_FULL_DUPLEX;
-		else
-			goto error_invalid_config;
-		break;
-	case ETH_LINK_SPEED_10:
-		if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
-			hw->phy.autoneg_advertised = E1000_ALL_10_SPEED;
-		else if (dev->data->dev_conf.link_duplex ==
-					ETH_LINK_HALF_DUPLEX)
-			hw->phy.autoneg_advertised = ADVERTISE_10_HALF;
-		else if (dev->data->dev_conf.link_duplex ==
-					ETH_LINK_FULL_DUPLEX)
-			hw->phy.autoneg_advertised = ADVERTISE_10_FULL;
-		else
-			goto error_invalid_config;
-		break;
-	case ETH_LINK_SPEED_100:
-		if (dev->data->dev_conf.link_duplex == ETH_LINK_AUTONEG_DUPLEX)
-			hw->phy.autoneg_advertised = E1000_ALL_100_SPEED;
-		else if (dev->data->dev_conf.link_duplex ==
-					ETH_LINK_HALF_DUPLEX)
-			hw->phy.autoneg_advertised = ADVERTISE_100_HALF;
-		else if (dev->data->dev_conf.link_duplex ==
-					ETH_LINK_FULL_DUPLEX)
-			hw->phy.autoneg_advertised = ADVERTISE_100_FULL;
-		else
-			goto error_invalid_config;
-		break;
-	case ETH_LINK_SPEED_1000:
-		if ((dev->data->dev_conf.link_duplex ==
-				ETH_LINK_AUTONEG_DUPLEX) ||
-			(dev->data->dev_conf.link_duplex ==
-					ETH_LINK_FULL_DUPLEX))
-			hw->phy.autoneg_advertised = ADVERTISE_1000_FULL;
-		else
-			goto error_invalid_config;
-		break;
-	case ETH_LINK_SPEED_10000:
-	default:
-		goto error_invalid_config;
-	}
-	e1000_setup_link(hw);
-
-	if (rte_intr_allow_others(intr_handle)) {
-		/* check if lsc interrupt is enabled */
-		if (dev->data->dev_conf.intr_conf.lsc != 0)
-			ret = eth_em_interrupt_setup(dev);
-			if (ret) {
-				PMD_INIT_LOG(ERR, "Unable to setup interrupts");
-				em_dev_clear_queues(dev);
-				return ret;
-			}
-	} else {
-		rte_intr_callback_unregister(intr_handle,
-						eth_em_interrupt_handler,
-						(void *)dev);
-		if (dev->data->dev_conf.intr_conf.lsc != 0)
-			PMD_INIT_LOG(INFO, "lsc won't enable because of"
-				     " no intr multiplex\n");
-	}
-	/* check if rxq interrupt is enabled */
-	if (dev->data->dev_conf.intr_conf.rxq != 0)
-		eth_em_rxq_interrupt_setup(dev);
-
-	rte_intr_enable(intr_handle);
-
-	adapter->stopped = 0;
-
-	PMD_INIT_LOG(DEBUG, "<<");
-
-	return (0);
-
-error_invalid_config:
-	PMD_INIT_LOG(ERR, "Invalid link_speed/link_duplex (%u/%u) for port %u",
-		     dev->data->dev_conf.link_speed,
-		     dev->data->dev_conf.link_duplex, dev->data->port_id);
-	em_dev_clear_queues(dev);
-	return (-EINVAL);
-}
-
-/*********************************************************************
- *
- *  This routine disables all traffic on the adapter by issuing a
- *  global reset on the MAC.
- *
- **********************************************************************/
-static void
-eth_em_stop(struct rte_eth_dev *dev)
-{
-	struct rte_eth_link link;
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
-
-	em_rxq_intr_disable(hw);
-	em_lsc_intr_disable(hw);
-
-	e1000_reset_hw(hw);
-	if (hw->mac.type >= e1000_82544)
-		E1000_WRITE_REG(hw, E1000_WUC, 0);
-
-	/* Power down the phy. Needed to make the link go down */
-	e1000_power_down_phy(hw);
-
-	em_dev_clear_queues(dev);
-
-	/* clear the recorded link status */
-	memset(&link, 0, sizeof(link));
-	rte_em_dev_atomic_write_link_status(dev, &link);
-
-	if (!rte_intr_allow_others(intr_handle))
-		/* resume to the default handler */
-		rte_intr_callback_register(intr_handle,
-					   eth_em_interrupt_handler,
-					   (void *)dev);
-
-	/* Clean datapath event and queue/vec mapping */
-	rte_intr_efd_disable(intr_handle);
-	if (intr_handle->intr_vec != NULL) {
-		rte_free(intr_handle->intr_vec);
-		intr_handle->intr_vec = NULL;
-	}
-}
-
-static void
-eth_em_close(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct e1000_adapter *adapter =
-		E1000_DEV_PRIVATE(dev->data->dev_private);
-
-	eth_em_stop(dev);
-	adapter->stopped = 1;
-	em_dev_free_queues(dev);
-	e1000_phy_hw_reset(hw);
-	em_release_manageability(hw);
-	em_hw_control_release(hw);
-}
-
-static int
-em_get_rx_buffer_size(struct e1000_hw *hw)
-{
-	uint32_t rx_buf_size;
-
-	rx_buf_size = ((E1000_READ_REG(hw, E1000_PBA) & UINT16_MAX) << 10);
-	return rx_buf_size;
-}
-
-/*********************************************************************
- *
- *  Initialize the hardware
- *
- **********************************************************************/
-static int
-em_hardware_init(struct e1000_hw *hw)
-{
-	uint32_t rx_buf_size;
-	int diag;
-
-	/* Issue a global reset */
-	e1000_reset_hw(hw);
-
-	/* Let the firmware know the OS is in control */
-	em_hw_control_acquire(hw);
-
-	/*
-	 * These parameters control the automatic generation (Tx) and
-	 * response (Rx) to Ethernet PAUSE frames.
-	 * - High water mark should allow for at least two standard size (1518)
-	 *   frames to be received after sending an XOFF.
-	 * - Low water mark works best when it is very near the high water mark.
-	 *   This allows the receiver to restart by sending XON when it has
-	 *   drained a bit. Here we use an arbitrary value of 1500 which will
-	 *   restart after one full frame is pulled from the buffer. There
-	 *   could be several smaller frames in the buffer and if so they will
-	 *   not trigger the XON until their total number reduces the buffer
-	 *   by 1500.
-	 * - The pause time is fairly large at 1000 x 512ns = 512 usec.
-	 */
-	rx_buf_size = em_get_rx_buffer_size(hw);
-
-	hw->fc.high_water = rx_buf_size - PMD_ROUNDUP(ETHER_MAX_LEN * 2, 1024);
-	hw->fc.low_water = hw->fc.high_water - 1500;
-
-	if (hw->mac.type == e1000_80003es2lan)
-		hw->fc.pause_time = UINT16_MAX;
-	else
-		hw->fc.pause_time = EM_FC_PAUSE_TIME;
-
-	hw->fc.send_xon = 1;
-
-	/* Set Flow control, use the tunable location if sane */
-	if (em_fc_setting <= e1000_fc_full)
-		hw->fc.requested_mode = em_fc_setting;
-	else
-		hw->fc.requested_mode = e1000_fc_none;
-
-	/* Workaround: no TX flow ctrl for PCH */
-	if (hw->mac.type == e1000_pchlan)
-		hw->fc.requested_mode = e1000_fc_rx_pause;
-
-	/* Override - settings for PCH2LAN, ya its magic :) */
-	if (hw->mac.type == e1000_pch2lan) {
-		hw->fc.high_water = 0x5C20;
-		hw->fc.low_water = 0x5048;
-		hw->fc.pause_time = 0x0650;
-		hw->fc.refresh_time = 0x0400;
-	}
-
-	diag = e1000_init_hw(hw);
-	if (diag < 0)
-		return (diag);
-	e1000_check_for_link(hw);
-	return (0);
-}
-
-/* This function is based on em_update_stats_counters() in e1000/if_em.c */
-static void
-eth_em_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *rte_stats)
-{
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct e1000_hw_stats *stats =
-			E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
-	int pause_frames;
-
-	if(hw->phy.media_type == e1000_media_type_copper ||
-			(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
-		stats->symerrs += E1000_READ_REG(hw,E1000_SYMERRS);
-		stats->sec += E1000_READ_REG(hw, E1000_SEC);
-	}
-
-	stats->crcerrs += E1000_READ_REG(hw, E1000_CRCERRS);
-	stats->mpc += E1000_READ_REG(hw, E1000_MPC);
-	stats->scc += E1000_READ_REG(hw, E1000_SCC);
-	stats->ecol += E1000_READ_REG(hw, E1000_ECOL);
-
-	stats->mcc += E1000_READ_REG(hw, E1000_MCC);
-	stats->latecol += E1000_READ_REG(hw, E1000_LATECOL);
-	stats->colc += E1000_READ_REG(hw, E1000_COLC);
-	stats->dc += E1000_READ_REG(hw, E1000_DC);
-	stats->rlec += E1000_READ_REG(hw, E1000_RLEC);
-	stats->xonrxc += E1000_READ_REG(hw, E1000_XONRXC);
-	stats->xontxc += E1000_READ_REG(hw, E1000_XONTXC);
-
-	/*
-	 * For watchdog management we need to know if we have been
-	 * paused during the last interval, so capture that here.
-	 */
-	pause_frames = E1000_READ_REG(hw, E1000_XOFFRXC);
-	stats->xoffrxc += pause_frames;
-	stats->xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC);
-	stats->fcruc += E1000_READ_REG(hw, E1000_FCRUC);
-	stats->prc64 += E1000_READ_REG(hw, E1000_PRC64);
-	stats->prc127 += E1000_READ_REG(hw, E1000_PRC127);
-	stats->prc255 += E1000_READ_REG(hw, E1000_PRC255);
-	stats->prc511 += E1000_READ_REG(hw, E1000_PRC511);
-	stats->prc1023 += E1000_READ_REG(hw, E1000_PRC1023);
-	stats->prc1522 += E1000_READ_REG(hw, E1000_PRC1522);
-	stats->gprc += E1000_READ_REG(hw, E1000_GPRC);
-	stats->bprc += E1000_READ_REG(hw, E1000_BPRC);
-	stats->mprc += E1000_READ_REG(hw, E1000_MPRC);
-	stats->gptc += E1000_READ_REG(hw, E1000_GPTC);
-
-	/*
-	 * For the 64-bit byte counters the low dword must be read first.
-	 * Both registers clear on the read of the high dword.
-	 */
-
-	stats->gorc += E1000_READ_REG(hw, E1000_GORCL);
-	stats->gorc += ((uint64_t)E1000_READ_REG(hw, E1000_GORCH) << 32);
-	stats->gotc += E1000_READ_REG(hw, E1000_GOTCL);
-	stats->gotc += ((uint64_t)E1000_READ_REG(hw, E1000_GOTCH) << 32);
-
-	stats->rnbc += E1000_READ_REG(hw, E1000_RNBC);
-	stats->ruc += E1000_READ_REG(hw, E1000_RUC);
-	stats->rfc += E1000_READ_REG(hw, E1000_RFC);
-	stats->roc += E1000_READ_REG(hw, E1000_ROC);
-	stats->rjc += E1000_READ_REG(hw, E1000_RJC);
-
-	stats->tor += E1000_READ_REG(hw, E1000_TORH);
-	stats->tot += E1000_READ_REG(hw, E1000_TOTH);
-
-	stats->tpr += E1000_READ_REG(hw, E1000_TPR);
-	stats->tpt += E1000_READ_REG(hw, E1000_TPT);
-	stats->ptc64 += E1000_READ_REG(hw, E1000_PTC64);
-	stats->ptc127 += E1000_READ_REG(hw, E1000_PTC127);
-	stats->ptc255 += E1000_READ_REG(hw, E1000_PTC255);
-	stats->ptc511 += E1000_READ_REG(hw, E1000_PTC511);
-	stats->ptc1023 += E1000_READ_REG(hw, E1000_PTC1023);
-	stats->ptc1522 += E1000_READ_REG(hw, E1000_PTC1522);
-	stats->mptc += E1000_READ_REG(hw, E1000_MPTC);
-	stats->bptc += E1000_READ_REG(hw, E1000_BPTC);
-
-	/* Interrupt Counts */
-
-	if (hw->mac.type >= e1000_82571) {
-		stats->iac += E1000_READ_REG(hw, E1000_IAC);
-		stats->icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC);
-		stats->icrxatc += E1000_READ_REG(hw, E1000_ICRXATC);
-		stats->ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC);
-		stats->ictxatc += E1000_READ_REG(hw, E1000_ICTXATC);
-		stats->ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC);
-		stats->ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC);
-		stats->icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC);
-		stats->icrxoc += E1000_READ_REG(hw, E1000_ICRXOC);
-	}
-
-	if (hw->mac.type >= e1000_82543) {
-		stats->algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC);
-		stats->rxerrc += E1000_READ_REG(hw, E1000_RXERRC);
-		stats->tncrs += E1000_READ_REG(hw, E1000_TNCRS);
-		stats->cexterr += E1000_READ_REG(hw, E1000_CEXTERR);
-		stats->tsctc += E1000_READ_REG(hw, E1000_TSCTC);
-		stats->tsctfc += E1000_READ_REG(hw, E1000_TSCTFC);
-	}
-
-	if (rte_stats == NULL)
-		return;
-
-	/* Rx Errors */
-	rte_stats->imissed = stats->mpc;
-	rte_stats->ierrors = stats->crcerrs +
-	                     stats->rlec + stats->ruc + stats->roc +
-	                     rte_stats->imissed +
-	                     stats->rxerrc + stats->algnerrc + stats->cexterr;
-
-	/* Tx Errors */
-	rte_stats->oerrors = stats->ecol + stats->latecol;
-
-	rte_stats->ipackets = stats->gprc;
-	rte_stats->opackets = stats->gptc;
-	rte_stats->ibytes   = stats->gorc;
-	rte_stats->obytes   = stats->gotc;
-}
-
-static void
-eth_em_stats_reset(struct rte_eth_dev *dev)
-{
-	struct e1000_hw_stats *hw_stats =
-			E1000_DEV_PRIVATE_TO_STATS(dev->data->dev_private);
-
-	/* HW registers are cleared on read */
-	eth_em_stats_get(dev, NULL);
-
-	/* Reset software totals */
-	memset(hw_stats, 0, sizeof(*hw_stats));
-}
-
-static int
-eth_em_rx_queue_intr_enable(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id)
-{
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	em_rxq_intr_enable(hw);
-	rte_intr_enable(&dev->pci_dev->intr_handle);
-
-	return 0;
-}
-
-static int
-eth_em_rx_queue_intr_disable(struct rte_eth_dev *dev, __rte_unused uint16_t queue_id)
-{
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	em_rxq_intr_disable(hw);
-
-	return 0;
-}
-
-static uint32_t
-em_get_max_pktlen(const struct e1000_hw *hw)
-{
-	switch (hw->mac.type) {
-	case e1000_82571:
-	case e1000_82572:
-	case e1000_ich9lan:
-	case e1000_ich10lan:
-	case e1000_pch2lan:
-	case e1000_82574:
-	case e1000_80003es2lan: /* 9K Jumbo Frame size */
-	case e1000_82583:
-		return (0x2412);
-	case e1000_pchlan:
-		return (0x1000);
-	/* Adapters that do not support jumbo frames */
-	case e1000_ich8lan:
-		return (ETHER_MAX_LEN);
-	default:
-		return (MAX_JUMBO_FRAME_SIZE);
-	}
-}
-
-static void
-eth_em_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
-{
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	dev_info->min_rx_bufsize = 256; /* See BSIZE field of RCTL register. */
-	dev_info->max_rx_pktlen = em_get_max_pktlen(hw);
-	dev_info->max_mac_addrs = hw->mac.rar_entry_count;
-
-	/*
-	 * Starting with 631xESB hw supports 2 TX/RX queues per port.
-	 * Unfortunatelly, all these nics have just one TX context.
-	 * So we have few choises for TX:
-	 * - Use just one TX queue.
-	 * - Allow cksum offload only for one TX queue.
-	 * - Don't allow TX cksum offload at all.
-	 * For now, option #1 was chosen.
-	 * To use second RX queue we have to use extended RX descriptor
-	 * (Multiple Receive Queues are mutually exclusive with UDP
-	 * fragmentation and are not supported when a legacy receive
-	 * descriptor format is used).
-	 * Which means separate RX routinies - as legacy nics (82540, 82545)
-	 * don't support extended RXD.
-	 * To avoid it we support just one RX queue for now (no RSS).
-	 */
-
-	dev_info->max_rx_queues = 1;
-	dev_info->max_tx_queues = 1;
-
-	dev_info->rx_desc_lim = (struct rte_eth_desc_lim) {
-		.nb_max = E1000_MAX_RING_DESC,
-		.nb_min = E1000_MIN_RING_DESC,
-		.nb_align = EM_RXD_ALIGN,
-	};
-
-	dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
-		.nb_max = E1000_MAX_RING_DESC,
-		.nb_min = E1000_MIN_RING_DESC,
-		.nb_align = EM_TXD_ALIGN,
-	};
-}
-
-/* return 0 means link status changed, -1 means not changed */
-static int
-eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_eth_link link, old;
-	int link_check, count;
-
-	link_check = 0;
-	hw->mac.get_link_status = 1;
-
-	/* possible wait-to-complete in up to 9 seconds */
-	for (count = 0; count < EM_LINK_UPDATE_CHECK_TIMEOUT; count ++) {
-		/* Read the real link status */
-		switch (hw->phy.media_type) {
-		case e1000_media_type_copper:
-			/* Do the work to read phy */
-			e1000_check_for_link(hw);
-			link_check = !hw->mac.get_link_status;
-			break;
-
-		case e1000_media_type_fiber:
-			e1000_check_for_link(hw);
-			link_check = (E1000_READ_REG(hw, E1000_STATUS) &
-					E1000_STATUS_LU);
-			break;
-
-		case e1000_media_type_internal_serdes:
-			e1000_check_for_link(hw);
-			link_check = hw->mac.serdes_has_link;
-			break;
-
-		default:
-			break;
-		}
-		if (link_check || wait_to_complete == 0)
-			break;
-		rte_delay_ms(EM_LINK_UPDATE_CHECK_INTERVAL);
-	}
-	memset(&link, 0, sizeof(link));
-	rte_em_dev_atomic_read_link_status(dev, &link);
-	old = link;
-
-	/* Now we check if a transition has happened */
-	if (link_check && (link.link_status == 0)) {
-		hw->mac.ops.get_link_up_info(hw, &link.link_speed,
-			&link.link_duplex);
-		link.link_status = 1;
-	} else if (!link_check && (link.link_status == 1)) {
-		link.link_speed = 0;
-		link.link_duplex = 0;
-		link.link_status = 0;
-	}
-	rte_em_dev_atomic_write_link_status(dev, &link);
-
-	/* not changed */
-	if (old.link_status == link.link_status)
-		return -1;
-
-	/* changed */
-	return 0;
-}
-
-/*
- * em_hw_control_acquire sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means
- * that the driver is loaded. For AMT version type f/w
- * this means that the network i/f is open.
- */
-static void
-em_hw_control_acquire(struct e1000_hw *hw)
-{
-	uint32_t ctrl_ext, swsm;
-
-	/* Let firmware know the driver has taken over */
-	if (hw->mac.type == e1000_82573) {
-		swsm = E1000_READ_REG(hw, E1000_SWSM);
-		E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_DRV_LOAD);
-
-	} else {
-		ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-		E1000_WRITE_REG(hw, E1000_CTRL_EXT,
-			ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-	}
-}
-
-/*
- * em_hw_control_release resets {CTRL_EXTT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that the
- * driver is no longer loaded. For AMT versions of the
- * f/w this means that the network i/f is closed.
- */
-static void
-em_hw_control_release(struct e1000_hw *hw)
-{
-	uint32_t ctrl_ext, swsm;
-
-	/* Let firmware taken over control of h/w */
-	if (hw->mac.type == e1000_82573) {
-		swsm = E1000_READ_REG(hw, E1000_SWSM);
-		E1000_WRITE_REG(hw, E1000_SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
-	} else {
-		ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-		E1000_WRITE_REG(hw, E1000_CTRL_EXT,
-			ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-	}
-}
-
-/*
- * Bit of a misnomer, what this really means is
- * to enable OS management of the system... aka
- * to disable special hardware management features.
- */
-static void
-em_init_manageability(struct e1000_hw *hw)
-{
-	if (e1000_enable_mng_pass_thru(hw)) {
-		uint32_t manc2h = E1000_READ_REG(hw, E1000_MANC2H);
-		uint32_t manc = E1000_READ_REG(hw, E1000_MANC);
-
-		/* disable hardware interception of ARP */
-		manc &= ~(E1000_MANC_ARP_EN);
-
-		/* enable receiving management packets to the host */
-		manc |= E1000_MANC_EN_MNG2HOST;
-		manc2h |= 1 << 5;  /* Mng Port 623 */
-		manc2h |= 1 << 6;  /* Mng Port 664 */
-		E1000_WRITE_REG(hw, E1000_MANC2H, manc2h);
-		E1000_WRITE_REG(hw, E1000_MANC, manc);
-	}
-}
-
-/*
- * Give control back to hardware management
- * controller if there is one.
- */
-static void
-em_release_manageability(struct e1000_hw *hw)
-{
-	uint32_t manc;
-
-	if (e1000_enable_mng_pass_thru(hw)) {
-		manc = E1000_READ_REG(hw, E1000_MANC);
-
-		/* re-enable hardware interception of ARP */
-		manc |= E1000_MANC_ARP_EN;
-		manc &= ~E1000_MANC_EN_MNG2HOST;
-
-		E1000_WRITE_REG(hw, E1000_MANC, manc);
-	}
-}
-
-static void
-eth_em_promiscuous_enable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t rctl;
-
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-	rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-}
-
-static void
-eth_em_promiscuous_disable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t rctl;
-
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-	rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_SBP);
-	if (dev->data->all_multicast == 1)
-		rctl |= E1000_RCTL_MPE;
-	else
-		rctl &= (~E1000_RCTL_MPE);
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-}
-
-static void
-eth_em_allmulticast_enable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t rctl;
-
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-	rctl |= E1000_RCTL_MPE;
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-}
-
-static void
-eth_em_allmulticast_disable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t rctl;
-
-	if (dev->data->promiscuous == 1)
-		return; /* must remain in all_multicast mode */
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-	rctl &= (~E1000_RCTL_MPE);
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-}
-
-static int
-eth_em_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct e1000_vfta * shadow_vfta =
-		E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
-	uint32_t vfta;
-	uint32_t vid_idx;
-	uint32_t vid_bit;
-
-	vid_idx = (uint32_t) ((vlan_id >> E1000_VFTA_ENTRY_SHIFT) &
-			      E1000_VFTA_ENTRY_MASK);
-	vid_bit = (uint32_t) (1 << (vlan_id & E1000_VFTA_ENTRY_BIT_SHIFT_MASK));
-	vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, vid_idx);
-	if (on)
-		vfta |= vid_bit;
-	else
-		vfta &= ~vid_bit;
-	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, vid_idx, vfta);
-
-	/* update local VFTA copy */
-	shadow_vfta->vfta[vid_idx] = vfta;
-
-	return 0;
-}
-
-static void
-em_vlan_hw_filter_disable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t reg;
-
-	/* Filter Table Disable */
-	reg = E1000_READ_REG(hw, E1000_RCTL);
-	reg &= ~E1000_RCTL_CFIEN;
-	reg &= ~E1000_RCTL_VFE;
-	E1000_WRITE_REG(hw, E1000_RCTL, reg);
-}
-
-static void
-em_vlan_hw_filter_enable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct e1000_vfta * shadow_vfta =
-		E1000_DEV_PRIVATE_TO_VFTA(dev->data->dev_private);
-	uint32_t reg;
-	int i;
-
-	/* Filter Table Enable, CFI not used for packet acceptance */
-	reg = E1000_READ_REG(hw, E1000_RCTL);
-	reg &= ~E1000_RCTL_CFIEN;
-	reg |= E1000_RCTL_VFE;
-	E1000_WRITE_REG(hw, E1000_RCTL, reg);
-
-	/* restore vfta from local copy */
-	for (i = 0; i < IGB_VFTA_SIZE; i++)
-		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, i, shadow_vfta->vfta[i]);
-}
-
-static void
-em_vlan_hw_strip_disable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t reg;
-
-	/* VLAN Mode Disable */
-	reg = E1000_READ_REG(hw, E1000_CTRL);
-	reg &= ~E1000_CTRL_VME;
-	E1000_WRITE_REG(hw, E1000_CTRL, reg);
-
-}
-
-static void
-em_vlan_hw_strip_enable(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t reg;
-
-	/* VLAN Mode Enable */
-	reg = E1000_READ_REG(hw, E1000_CTRL);
-	reg |= E1000_CTRL_VME;
-	E1000_WRITE_REG(hw, E1000_CTRL, reg);
-}
-
-static void
-eth_em_vlan_offload_set(struct rte_eth_dev *dev, int mask)
-{
-	if(mask & ETH_VLAN_STRIP_MASK){
-		if (dev->data->dev_conf.rxmode.hw_vlan_strip)
-			em_vlan_hw_strip_enable(dev);
-		else
-			em_vlan_hw_strip_disable(dev);
-	}
-
-	if(mask & ETH_VLAN_FILTER_MASK){
-		if (dev->data->dev_conf.rxmode.hw_vlan_filter)
-			em_vlan_hw_filter_enable(dev);
-		else
-			em_vlan_hw_filter_disable(dev);
-	}
-}
-
-/*
- * It enables the interrupt mask and then enable the interrupt.
- *
- * @param dev
- *  Pointer to struct rte_eth_dev.
- *
- * @return
- *  - On success, zero.
- *  - On failure, a negative value.
- */
-static int
-eth_em_interrupt_setup(struct rte_eth_dev *dev)
-{
-	uint32_t regval;
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	/* clear interrupt */
-	E1000_READ_REG(hw, E1000_ICR);
-	regval = E1000_READ_REG(hw, E1000_IMS);
-	E1000_WRITE_REG(hw, E1000_IMS, regval | E1000_ICR_LSC);
-	return (0);
-}
-
-/*
- * It clears the interrupt causes and enables the interrupt.
- * It will be called once only during nic initialized.
- *
- * @param dev
- *  Pointer to struct rte_eth_dev.
- *
- * @return
- *  - On success, zero.
- *  - On failure, a negative value.
- */
-static int
-eth_em_rxq_interrupt_setup(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-	E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	E1000_READ_REG(hw, E1000_ICR);
-	em_rxq_intr_enable(hw);
-	return 0;
-}
-
-/*
- * It enable receive packet interrupt.
- * @param hw
- * Pointer to struct e1000_hw
- *
- * @return
- */
-static void
-em_rxq_intr_enable(struct e1000_hw *hw)
-{
-	E1000_WRITE_REG(hw, E1000_IMS, E1000_IMS_RXT0);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/*
- * It disabled lsc interrupt.
- * @param hw
- * Pointer to struct e1000_hw
- *
- * @return
- */
-static void
-em_lsc_intr_disable(struct e1000_hw *hw)
-{
-	E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_LSC);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/*
- * It disabled receive packet interrupt.
- * @param hw
- * Pointer to struct e1000_hw
- *
- * @return
- */
-static void
-em_rxq_intr_disable(struct e1000_hw *hw)
-{
-	E1000_READ_REG(hw, E1000_ICR);
-	E1000_WRITE_REG(hw, E1000_IMC, E1000_IMS_RXT0);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/*
- * It reads ICR and gets interrupt causes, check it and set a bit flag
- * to update link status.
- *
- * @param dev
- *  Pointer to struct rte_eth_dev.
- *
- * @return
- *  - On success, zero.
- *  - On failure, a negative value.
- */
-static int
-eth_em_interrupt_get_status(struct rte_eth_dev *dev)
-{
-	uint32_t icr;
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct e1000_interrupt *intr =
-		E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
-
-	/* read-on-clear nic registers here */
-	icr = E1000_READ_REG(hw, E1000_ICR);
-	if (icr & E1000_ICR_LSC) {
-		intr->flags |= E1000_FLAG_NEED_LINK_UPDATE;
-	}
-
-	return 0;
-}
-
-/*
- * It executes link_update after knowing an interrupt is prsent.
- *
- * @param dev
- *  Pointer to struct rte_eth_dev.
- *
- * @return
- *  - On success, zero.
- *  - On failure, a negative value.
- */
-static int
-eth_em_interrupt_action(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw =
-		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct e1000_interrupt *intr =
-		E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
-	uint32_t tctl, rctl;
-	struct rte_eth_link link;
-	int ret;
-
-	if (!(intr->flags & E1000_FLAG_NEED_LINK_UPDATE))
-		return -1;
-
-	intr->flags &= ~E1000_FLAG_NEED_LINK_UPDATE;
-	rte_intr_enable(&(dev->pci_dev->intr_handle));
-
-	/* set get_link_status to check register later */
-	hw->mac.get_link_status = 1;
-	ret = eth_em_link_update(dev, 0);
-
-	/* check if link has changed */
-	if (ret < 0)
-		return 0;
-
-	memset(&link, 0, sizeof(link));
-	rte_em_dev_atomic_read_link_status(dev, &link);
-	if (link.link_status) {
-		PMD_INIT_LOG(INFO, " Port %d: Link Up - speed %u Mbps - %s",
-			     dev->data->port_id, (unsigned)link.link_speed,
-			     link.link_duplex == ETH_LINK_FULL_DUPLEX ?
-			     "full-duplex" : "half-duplex");
-	} else {
-		PMD_INIT_LOG(INFO, " Port %d: Link Down", dev->data->port_id);
-	}
-	PMD_INIT_LOG(DEBUG, "PCI Address: %04d:%02d:%02d:%d",
-		     dev->pci_dev->addr.domain, dev->pci_dev->addr.bus,
-		     dev->pci_dev->addr.devid, dev->pci_dev->addr.function);
-
-	tctl = E1000_READ_REG(hw, E1000_TCTL);
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-	if (link.link_status) {
-		/* enable Tx/Rx */
-		tctl |= E1000_TCTL_EN;
-		rctl |= E1000_RCTL_EN;
-	} else {
-		/* disable Tx/Rx */
-		tctl &= ~E1000_TCTL_EN;
-		rctl &= ~E1000_RCTL_EN;
-	}
-	E1000_WRITE_REG(hw, E1000_TCTL, tctl);
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-	E1000_WRITE_FLUSH(hw);
-
-	return 0;
-}
-
-/**
- * Interrupt handler which shall be registered at first.
- *
- * @param handle
- *  Pointer to interrupt handle.
- * @param param
- *  The address of parameter (struct rte_eth_dev *) regsitered before.
- *
- * @return
- *  void
- */
-static void
-eth_em_interrupt_handler(__rte_unused struct rte_intr_handle *handle,
-							void *param)
-{
-	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
-
-	eth_em_interrupt_get_status(dev);
-	eth_em_interrupt_action(dev);
-	_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
-}
-
-static int
-eth_em_led_on(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw;
-
-	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	return (e1000_led_on(hw) == E1000_SUCCESS ? 0 : -ENOTSUP);
-}
-
-static int
-eth_em_led_off(struct rte_eth_dev *dev)
-{
-	struct e1000_hw *hw;
-
-	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	return (e1000_led_off(hw) == E1000_SUCCESS ? 0 : -ENOTSUP);
-}
-
-static int
-eth_em_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
-{
-	struct e1000_hw *hw;
-	uint32_t ctrl;
-	int tx_pause;
-	int rx_pause;
-
-	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	fc_conf->pause_time = hw->fc.pause_time;
-	fc_conf->high_water = hw->fc.high_water;
-	fc_conf->low_water = hw->fc.low_water;
-	fc_conf->send_xon = hw->fc.send_xon;
-	fc_conf->autoneg = hw->mac.autoneg;
-
-	/*
-	 * Return rx_pause and tx_pause status according to actual setting of
-	 * the TFCE and RFCE bits in the CTRL register.
-	 */
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-	if (ctrl & E1000_CTRL_TFCE)
-		tx_pause = 1;
-	else
-		tx_pause = 0;
-
-	if (ctrl & E1000_CTRL_RFCE)
-		rx_pause = 1;
-	else
-		rx_pause = 0;
-
-	if (rx_pause && tx_pause)
-		fc_conf->mode = RTE_FC_FULL;
-	else if (rx_pause)
-		fc_conf->mode = RTE_FC_RX_PAUSE;
-	else if (tx_pause)
-		fc_conf->mode = RTE_FC_TX_PAUSE;
-	else
-		fc_conf->mode = RTE_FC_NONE;
-
-	return 0;
-}
-
-static int
-eth_em_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
-{
-	struct e1000_hw *hw;
-	int err;
-	enum e1000_fc_mode rte_fcmode_2_e1000_fcmode[] = {
-		e1000_fc_none,
-		e1000_fc_rx_pause,
-		e1000_fc_tx_pause,
-		e1000_fc_full
-	};
-	uint32_t rx_buf_size;
-	uint32_t max_high_water;
-	uint32_t rctl;
-
-	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	if (fc_conf->autoneg != hw->mac.autoneg)
-		return -ENOTSUP;
-	rx_buf_size = em_get_rx_buffer_size(hw);
-	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x", rx_buf_size);
-
-	/* At least reserve one Ethernet frame for watermark */
-	max_high_water = rx_buf_size - ETHER_MAX_LEN;
-	if ((fc_conf->high_water > max_high_water) ||
-	    (fc_conf->high_water < fc_conf->low_water)) {
-		PMD_INIT_LOG(ERR, "e1000 incorrect high/low water value");
-		PMD_INIT_LOG(ERR, "high water must <= 0x%x", max_high_water);
-		return (-EINVAL);
-	}
-
-	hw->fc.requested_mode = rte_fcmode_2_e1000_fcmode[fc_conf->mode];
-	hw->fc.pause_time     = fc_conf->pause_time;
-	hw->fc.high_water     = fc_conf->high_water;
-	hw->fc.low_water      = fc_conf->low_water;
-	hw->fc.send_xon	      = fc_conf->send_xon;
-
-	err = e1000_setup_link_generic(hw);
-	if (err == E1000_SUCCESS) {
-
-		/* check if we want to forward MAC frames - driver doesn't have native
-		 * capability to do that, so we'll write the registers ourselves */
-
-		rctl = E1000_READ_REG(hw, E1000_RCTL);
-
-		/* set or clear MFLCN.PMCF bit depending on configuration */
-		if (fc_conf->mac_ctrl_frame_fwd != 0)
-			rctl |= E1000_RCTL_PMCF;
-		else
-			rctl &= ~E1000_RCTL_PMCF;
-
-		E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-		E1000_WRITE_FLUSH(hw);
-
-		return 0;
-	}
-
-	PMD_INIT_LOG(ERR, "e1000_setup_link_generic = 0x%x", err);
-	return (-EIO);
-}
-
-static void
-eth_em_rar_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
-		uint32_t index, __rte_unused uint32_t pool)
-{
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	e1000_rar_set(hw, mac_addr->addr_bytes, index);
-}
-
-static void
-eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index)
-{
-	uint8_t addr[ETHER_ADDR_LEN];
-	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
-	memset(addr, 0, sizeof(addr));
-
-	e1000_rar_set(hw, addr, index);
-}
-
-static int
-eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
-{
-	struct rte_eth_dev_info dev_info;
-	struct e1000_hw *hw;
-	uint32_t frame_size;
-	uint32_t rctl;
-
-	eth_em_infos_get(dev, &dev_info);
-	frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE;
-
-	/* check that mtu is within the allowed range */
-	if ((mtu < ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
-		return -EINVAL;
-
-	/* refuse mtu that requires the support of scattered packets when this
-	 * feature has not been enabled before. */
-	if (!dev->data->scattered_rx &&
-	    frame_size > dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)
-		return -EINVAL;
-
-	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-
-	/* switch to jumbo mode if needed */
-	if (frame_size > ETHER_MAX_LEN) {
-		dev->data->dev_conf.rxmode.jumbo_frame = 1;
-		rctl |= E1000_RCTL_LPE;
-	} else {
-		dev->data->dev_conf.rxmode.jumbo_frame = 0;
-		rctl &= ~E1000_RCTL_LPE;
-	}
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-
-	/* update max frame size */
-	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
-	return 0;
-}
-
-static int
-eth_em_set_mc_addr_list(struct rte_eth_dev *dev,
-			struct ether_addr *mc_addr_set,
-			uint32_t nb_mc_addr)
-{
-	struct e1000_hw *hw;
-
-	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	e1000_update_mc_addr_list(hw, (u8 *)mc_addr_set, nb_mc_addr);
-	return 0;
-}
-
-struct rte_driver em_pmd_drv = {
-	.type = PMD_PDEV,
-	.init = rte_em_pmd_init,
-};
-
-PMD_REGISTER_DRIVER(em_pmd_drv);