== TRex Low-Cost, High-Speed Stateful Traffic Generator *New* Stateless support was released see more in the folowing section Traditionally, network infrastructure devices have been tested using commercial traffic generators, while performance was measured using metrics like packets per second (PPS) and No Drop Rate (NDR). As the network infrastructure functionality has become more complex, stateful traffic generators have become necessary in order to test with more realistic application traffic pattern scenarios. Realistic and Stateful traffic generators are needed in order to: * Test and provide more realistic performance numbers * Design and architecture of SW and HW based on realistic use cases === Current Challenges * *Cost* : Commercial State-full traffic generators are expensive * *Scale* : Bandwidth does not scale up well with features complexity * *Standardization* : Lack of standardization of traffic patterns and methodologies * *Flexibility* : Commercial tools do not allow agility when flexibility and changes are needed === Implications * High capital expenditure (capex) spent by different teams * Testing in low scale and extrapolation became a common practice, it is not accurate, and hides real life bottlenecks and quality issues * Different feature / platform teams benchmark and results methodology * Delays in development and testing due to testing tools features dependency * Resource and effort investment in developing different ad hoc tools and test methodologies TRex addresses these problems through an innovative and extendable software implementation and by leveraging standard and open SW and x86/UCS HW. === TRex in a Nutshell * Cisco Pioneer Award Winner 2015 * Fueled by DPDK * Generates and analyzes L4-7 traffic and able to provide in one tool capabilities provided by commercial L7 tools. * Stateful traffic generator based on pre-processing and smart replay of real traffic templates. * Generates and *amplifies* both client and server side traffic. * Customized functionality can be added. * Scale to 200Gb/sec for one UCS ( using Intel 40Gb/sec NICS) * Low cost * Virtual interfaces support, enable TRex to be used in a fully virtual environment without physical NICs and the following example use cases: ** Amazon AWS ** TRex on your laptop ** Self-contained packaging === Current Stateful TRex Feature sets * Support Intel DPDK 1/10/40Gbps interfaces * High scale of realistic traffic (number of clients, number of server, bandwidth)-up to 200Gb/sec in one UCS * Virtualization interfaces support (VMXNET3/E1000 ) * Some stateless support for example IMIX traffic generation * Latency/Jitter measurements * Flow ordering checks * NAT, PAT dynamic translation learning * IPV6 inline replacement * Some cross flow support (e.g RTSP/SIP) * Python automation API * Windows GUI for real-time latency/jitter/flow order === *New* TRex Stateless feature sets * Large scale - Supports about 10-22 million packets per second (mpps) per core, scalable with the number of cores * Support for 1, 10, 25, 40 interfaces * Profile can support multiple streams, scalable to 10K parallel streams * Supported for each stream: ** Packet template - ability to build any packet (including malformed) using link:https://en.wikipedia.org/wiki/Scapy[Scapy] (example: MPLS/IPv4/Ipv6/GRE/VXLAN/NSH) ** Field engine program *** Ability to change any field inside the packet (example: src_ip = 10.0.0.1-10.0.0.255) *** Ability to change the packet size (example: random packet size 64-9K) ** Mode - Continuous/Burst/Multi-burst support ** Rate can be specified as: *** Packets per second (example: 14MPPS) *** L1/L2 bandwidth (example: 500Mb/sec) *** Interface link percentage (example: 10%) ** Support for HLTAPI-like profile definition ** Action - stream can trigger a stream * Interactive support - Fast Console, GUI * Statistics per interface * Statistics per stream done in hardware * Latency and Jitter per stream * Blazingly fast automation support (Python 2.7/3.4) * Multi-user support The following example shows three streams configured for Continuous, Burst, and Multi-burst traffic. image::http://trex-tgn.cisco.com/trex/doc/images/stl_streams_example_02.png[title="",align="center",width=600, link="http://trex-tgn.cisco.com/trex/doc/images/stl_streams_example_02.png"] A new JSON-RPC2 Architecture provides support for interactive mode image::http://trex-tgn.cisco.com/trex/doc/images/trex_architecture_01.png[title="",align="center",width=600, link="http://trex-tgn.cisco.com/trex/doc/images/trex_architecture_01.png"] more info can be found here link:http://trex-tgn.cisco.com/trex/doc/index.html[Documentation] === What it’s not * There is no routing emulation support, for example, BGP/ISIS/ARP * There is no TCP stack. * Client only or Server Only. === What you can do with it ==== Stateful * Beanchmark/Stress stateful features : ** NAT ** DPI ** Load Balancer ** Network cache devices ** FireWall ** IPS/IDS * Mixing Application level traffic/profile (HTTP/SIP/Video) * Unlimited concurent flows, limited only by memory ==== Stateless * Beanchmark/Stress vSwitch RFC2544 === Presentation link:http://www.slideshare.net/HanochHaim/trex-realistic-traffic-generator-stateless-support[New Stateless support] link:http://www.slideshare.net/harryvanhaaren/trex-traffig-gen-hanoch-haim[DPDK summit 2015] link:http://www.youtube.com/watch?v=U0gRalB7DOs[Video DPDK summit 2015] link:http://trex-tgn.cisco.com/trex/doc/trex_preso.html[Presentation] === Wiki Internal link:https://github.com/cisco-system-traffic-generator/trex-core/wiki[Wiki] === YouTrack Report bug/request feature link:http://trex-tgn.cisco.com/youtrack/issues[YouTrack] === Windows Stateful Client GUI image::http://trex-tgn.cisco.com/trex/doc/images/TrexViewer.png[title="",align="center",width=200, link="http://trex-tgn.cisco.com/trex/doc/images/TrexViewer.png"] === Sandbox for evaluation Try the new Devnet Sandbox link:https://devnetsandbox.cisco.com/RM/Topology[TRex Sandbox] === Contact Us Follow us on https://groups.google.com/forum/#!forum/trex-tgn[TRex traffic generator google group], Or contact via: mailto:trex-tgn@googlegroups.com[Group mailing list (trex-tgn@googlegroups.com)] Or via Cisco Devnet portal link:http://communities.cisco.com/community/developer/trex/[Devnet] *TRex team,Cisco Systems Inc* === Roadmap * L2 emulation plugin support IPV6-ND/ARP/DHCP * High speed TCP stack support