################################################################ #### TRex nightly test configuration file #### ################################################################ ### TRex configuration: # hostname - can be DNS name or IP for the TRex machine for ssh to the box # password - root password for TRex machine # is_dual - should the TRex inject with -p ? # version_path - path to the TRex version and executable # cores - how many cores should be used # latency - rate of latency packets injected by the TRex ### Router configuration: # hostname - the router hostname as apears in ______# cli prefix # ip_address - the router's ip that can be used to communicate with # image - the desired imaged wished to be loaded as the router's running config # line_password - router password when access via Telent # en_password - router password when changing to "enable" mode # interfaces - an array of client-server pairs, representing the interfaces configurations of the router # configurations - an array of configurations that could possibly loaded into the router during the test. # The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench ### TFTP configuration: # hostname - the tftp hostname # ip_address - the tftp's ip address # images_path - the tftp's relative path in which the router's images are located ### Test_misc configuration: # expected_bw - the "golden" bandwidth (in Gbps) results planned on receiving from the test trex: hostname : hostname password : root password version_path : not used cores : 1 router: model : device model hostname : device hostname ip_address : device ip image : device image name line_password : telnet pass en_password : enable pass mgmt_interface : GigabitEthernet0/0/0 clean_config : path to clean_config file intf_masking : 255.255.255.0 ipv6_mask : 64 interfaces : - client : name : GigabitEthernet0/0/1 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.1000.0000 server : name : GigabitEthernet0/0/2 src_mac_addr : 0000.0002.0000 dest_mac_addr : 0000.2000.0000 vrf_name : null - client : name : GigabitEthernet0/0/3 src_mac_addr : 0000.0003.0000 dest_mac_addr : 0000.3000.0000 server : name : GigabitEthernet0/0/4 src_mac_addr : 0000.0004.0000 dest_mac_addr : 0000.4000.0000 vrf_name : dup tftp: hostname : tftp hostname ip_address : tftp ip root_dir : tftp root dir images_path : path related to root dir