################################################################
####         T-Rex nightly test configuration file          ####
################################################################


### T-Rex configuration:
# hostname       - can be DNS name or IP for the TRex machine for ssh to the box
# password       - root password for TRex machine
# is_dual        - should the TRex inject with -p ?
# version_path   - path to the t-rex version and executable
# cores          - how many cores should be used
# latency        - rate of latency packets injected by the TRex
# modes          - list of modes (tagging) of this setup (loopback, virtual etc.)
# 	  * loopback - Trex works via loopback. Router and TFTP configurations may be skipped.
#     * virtual  - virtual OS (accept low CPU utilization in tests)

### Router configuration:
# hostname       - the router hostname as apears in ______# cli prefix
# ip_address     - the router's ip that can be used to communicate with
# image          - the desired imaged wished to be loaded as the router's running config
# line_password  - router password when access via Telent
# en_password    - router password when changing to "enable" mode
# interfaces     - an array of client-server pairs, representing the interfaces configurations of the router
# configurations - an array of configurations that could possibly loaded into the router during the test. 
#                  The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench

### TFTP configuration:
# hostname       - the tftp hostname
# ip_address     - the tftp's ip address
# images_path    - the tftp's relative path in which the router's images are located

### Test_misc configuration:
# expected_bw    - the "golden" bandwidth (in Gbps) results planned on receiving from the test

trex:
  hostname       : cpp-rtp-trex-01
  cores          : 4

router:
  model          : ESP100
  hostname       : cpp-rtp-ts-15
  ip_address     : 172.18.4.34
  port           : 2054
  image          : trex_regression_v155_315.bin
  line_password  : cisco
  en_password    : cisco
  mgmt_interface : dummy
  clean_config   : dummy
  intf_masking   : 255.255.255.0
  ipv6_mask      : 64
  interfaces     :
    - client : 
        name          : TenGigabitEthernet0/0/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      server : 
        name          : TenGigabitEthernet0/1/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      vrf_name      :
    - client : 
        name          : TenGigabitEthernet0/2/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      server : 
        name          : TenGigabitEthernet0/3/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      vrf_name      :
    - client : 
        name          : TenGigabitEthernet1/0/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      server : 
        name          : TenGigabitEthernet1/1/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      vrf_name      :   
    - client : 
        name          : TenGigabitEthernet1/2/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      server : 
        name          : TenGigabitEthernet1/3/0
        src_mac_addr  : 0000.0001.0000
        dest_mac_addr : 0000.0001.0000
      vrf_name      :   
    

tftp:
  hostname       : ats-asr-srv-1
  ip_address     : 10.56.128.23
  root_dir       : /auto/avc-devtest/images/
  images_path    : /images/RP1/