################################################################ #### T-Rex nightly test configuration file #### ################################################################ ### T-Rex configuration: # hostname - can be DNS name or IP for the TRex machine for ssh to the box # password - root password for TRex machine # is_dual - should the TRex inject with -p ? # version_path - path to the t-rex version and executable # cores - how many cores should be used # latency - rate of latency packets injected by the TRex # modes - list of modes (tagging) of this setup (loopback, virtual etc.) # * loopback - Trex works via loopback. Router and TFTP configurations may be skipped. # * virtual - virtual OS (accept low CPU utilization in tests) ### Router configuration: # hostname - the router hostname as apears in ______# cli prefix # ip_address - the router's ip that can be used to communicate with # image - the desired imaged wished to be loaded as the router's running config # line_password - router password when access via Telent # en_password - router password when changing to "enable" mode # interfaces - an array of client-server pairs, representing the interfaces configurations of the router # configurations - an array of configurations that could possibly loaded into the router during the test. # The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench ### TFTP configuration: # hostname - the tftp hostname # ip_address - the tftp's ip address # images_path - the tftp's relative path in which the router's images are located ### Test_misc configuration: # expected_bw - the "golden" bandwidth (in Gbps) results planned on receiving from the test trex: hostname : cpp-rtp-trex-01 cores : 4 router: model : ESP100 hostname : cpp-rtp-ts-15 ip_address : 172.18.4.34 port : 2054 image : trex_regression_v155_315.bin line_password : cisco en_password : cisco mgmt_interface : dummy clean_config : dummy intf_masking : 255.255.255.0 ipv6_mask : 64 interfaces : - client : name : TenGigabitEthernet0/0/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 server : name : TenGigabitEthernet0/1/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 vrf_name : - client : name : TenGigabitEthernet0/2/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 server : name : TenGigabitEthernet0/3/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 vrf_name : - client : name : TenGigabitEthernet1/0/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 server : name : TenGigabitEthernet1/1/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 vrf_name : - client : name : TenGigabitEthernet1/2/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 server : name : TenGigabitEthernet1/3/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 vrf_name : tftp: hostname : ats-asr-srv-1 ip_address : 10.56.128.23 root_dir : /auto/avc-devtest/images/ images_path : /images/RP1/