################################################################ #### T-Rex nightly test configuration file #### ################################################################ ### T-Rex configuration: # hostname - can be DNS name or IP for the TRex machine for ssh to the box # password - root password for TRex machine # is_dual - should the TRex inject with -p ? # version_path - path to the t-rex version and executable # cores - how many cores should be used # latency - rate of latency packets injected by the TRex # modes - list of modes (tagging) of this setup (loopback etc.) # * loopback - Trex works via loopback. Router and TFTP configurations may be skipped. # * VM - Virtual OS (accept low CPU utilization in tests, latency can get spikes) # * virt_nics - NICs are virtual (VMXNET3 etc.) ### Router configuration: # hostname - the router hostname as apears in ______# cli prefix # ip_address - the router's ip that can be used to communicate with # image - the desired imaged wished to be loaded as the router's running config # line_password - router password when access via Telent # en_password - router password when changing to "enable" mode # interfaces - an array of client-server pairs, representing the interfaces configurations of the router # configurations - an array of configurations that could possibly loaded into the router during the test. # The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench ### TFTP configuration: # hostname - the tftp hostname # ip_address - the tftp's ip address # images_path - the tftp's relative path in which the router's images are located ### Test_misc configuration: # expected_bw - the "golden" bandwidth (in Gbps) results planned on receiving from the test trex: hostname : csi-trex-12 # version_path : /auto/proj-pcube-b/apps/PL-b/tools/bp_sim2/v1.57/ #/auto/srg-sce-swinfra-usr/emb/users/danklei/Work/asr1k/emb/private/bpsim/main/scripts cores : 1 modes : [VM] router: model : ASR1001x hostname : csi-asr-01 ip_address : 10.56.216.103 image : asr1001x-universalk9_npe.BLD_V155_2_S_XE315_THROTTLE_LATEST_20151121_110441-std_2.SSA.bin line_password : cisco en_password : cisco mgmt_interface : GigabitEthernet0 clean_config : /Configurations/danklei/asr1001_TRex_clean_config.cfg intf_masking : 255.255.255.0 ipv6_mask : 64 interfaces : - client : name : Te0/0/0 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 server : name : Te0/0/1 src_mac_addr : 0000.0001.0000 dest_mac_addr : 0000.0001.0000 vrf_name : null tftp: hostname : ats-asr-srv-1 ip_address : 10.56.128.23 root_dir : /auto/avc-devtest/ images_path : /images/RP2/