#!/router/bin/python from .stl_general_test import CStlGeneral_Test, CTRexScenario from trex_stl_lib.api import * import os, sys ERROR_LATENCY_TOO_HIGH = 1 class STLRX_Test(CStlGeneral_Test): """Tests for RX feature""" def setUp(self): #if CTRexScenario.setup_name in ('trex08', 'trex09'): # self.skip('This test makes trex08 and trex09 sick. Fix those ASAP.') if self.is_virt_nics: self.skip('Skip this for virtual NICs for now') per_driver_params = {"rte_vmxnet3_pmd": [1, 50, 1,False], "rte_ixgbe_pmd": [30, 5000, 1,True,200,400], "rte_i40e_pmd": [80, 5000, 1,True,100,250], "rte_igb_pmd": [80, 500, 1,False], "rte_em_pmd": [1, 50, 1,False], "rte_virtio_pmd": [1, 50, 1,False]} CStlGeneral_Test.setUp(self) assert 'bi' in CTRexScenario.stl_ports_map self.c = CTRexScenario.stl_trex self.tx_port, self.rx_port = CTRexScenario.stl_ports_map['bi'][0] port_info = self.c.get_port_info(ports = self.rx_port)[0] self.speed = port_info['speed'] cap = port_info['rx']['caps'] if "flow_stats" not in cap or "latency" not in cap: self.skip('port {0} does not support RX'.format(self.rx_port)) self.cap = cap self.rate_percent = per_driver_params[port_info['driver']][0] self.total_pkts = per_driver_params[port_info['driver']][1] if len(per_driver_params[port_info['driver']]) > 2: self.rate_lat = per_driver_params[port_info['driver']][2] else: self.rate_lat = self.rate_percent self.drops_expected = False self.c.reset(ports = [self.tx_port, self.rx_port]) self.pkt = STLPktBuilder(pkt = Ether()/IP(src="16.0.0.1",dst="48.0.0.1")/UDP(dport=12,sport=1025)/('Your_paylaod_comes_here')) self.large_pkt = STLPktBuilder(pkt = Ether()/IP(src="16.0.0.1",dst="48.0.0.1")/UDP(dport=12,sport=1025)/('a'*1000)) self.pkt_9k = STLPktBuilder(pkt = Ether()/IP(src="16.0.0.1",dst="48.0.0.1")/UDP(dport=12,sport=1025)/('a'*9000)) drv_name=port_info['driver'] self.latency_9k_enable=per_driver_params[drv_name][3] if self.latency_9k_enable: self.latency_9k_max_average = per_driver_params[drv_name][4] self.latency_9k_max_latency = per_driver_params[drv_name][5] @classmethod def tearDownClass(cls): if CTRexScenario.stl_init_error: return # connect back at end of tests if not cls.is_connected(): CTRexScenario.stl_trex.connect() def __verify_latency (self, latency_stats,max_latency,max_average): error=0; err_latency = latency_stats['err_cntrs'] latency = latency_stats['latency'] for key in err_latency : error +=err_latency[key] if error !=0 : pprint.pprint(err_latency) tmp = 'RX pkts ERROR - one of the error is on' print(tmp) #assert False, tmp if latency['average']> max_average: pprint.pprint(latency_stats) tmp = 'Average latency is too high {0} {1} '.format(latency['average'], max_average) print(tmp) return ERROR_LATENCY_TOO_HIGH if latency['total_max']> max_latency: pprint.pprint(latency_stats) tmp = 'Max latency is too high {0} {1} '.format(latency['total_max'], max_latency) print(tmp) return ERROR_LATENCY_TOO_HIGH return 0 def __verify_flow (self, pg_id, total_pkts, pkt_len, stats): flow_stats = stats['flow_stats'].get(pg_id) latency_stats = stats['latency'].get(pg_id) if not flow_stats: assert False, "no flow stats available" tx_pkts = flow_stats['tx_pkts'].get(self.tx_port, 0) tx_bytes = flow_stats['tx_bytes'].get(self.tx_port, 0) rx_pkts = flow_stats['rx_pkts'].get(self.rx_port, 0) if latency_stats is not None: drops = latency_stats['err_cntrs']['dropped'] ooo = latency_stats['err_cntrs']['out_of_order'] dup = latency_stats['err_cntrs']['dup'] sth = latency_stats['err_cntrs']['seq_too_high'] stl = latency_stats['err_cntrs']['seq_too_low'] lat = latency_stats['latency'] if ooo != 0 or dup != 0 or stl != 0: pprint.pprint(latency_stats) tmp='Error packets - dropped:{0}, ooo:{1} dup:{2} seq too high:{3} seq too low:{4}'.format(drops, ooo, dup, sth, stl) assert False, tmp if (drops != 0 or sth != 0) and not self.drops_expected: pprint.pprint(latency_stats) tmp='Error packets - dropped:{0}, ooo:{1} dup:{2} seq too high:{3} seq too low:{4}'.format(drops, ooo, dup, sth, stl) assert False, tmp if tx_pkts != total_pkts: pprint.pprint(flow_stats) tmp = 'TX pkts mismatch - got: {0}, expected: {1}'.format(tx_pkts, total_pkts) assert False, tmp if tx_bytes != (total_pkts * (pkt_len + 4)): # + 4 for ethernet CRC pprint.pprint(flow_stats) tmp = 'TX bytes mismatch - got: {0}, expected: {1}'.format(tx_bytes, (total_pkts * pkt_len)) assert False, tmp if rx_pkts != total_pkts and not self.drops_expected: pprint.pprint(flow_stats) tmp = 'RX pkts mismatch - got: {0}, expected: {1}'.format(rx_pkts, total_pkts) assert False, tmp if "rx_bytes" in self.cap: rx_bytes = flow_stats['rx_bytes'].get(self.rx_port, 0) if rx_bytes != (total_pkts * (pkt_len + 4)) and not self.drops_expected: # +4 for ethernet CRC pprint.pprint(flow_stats) tmp = 'RX bytes mismatch - got: {0}, expected: {1}'.format(rx_bytes, (total_pkts * pkt_len)) assert False, tmp # RX itreation def __rx_iteration (self, exp_list): self.c.clear_stats() self.c.start(ports = [self.tx_port]) self.c.wait_on_traffic(ports = [self.tx_port]) stats = self.c.get_stats() for exp in exp_list: self.__verify_flow(exp['pg_id'], exp['total_pkts'], exp['pkt_len'], stats) # one stream on TX --> RX def test_one_stream(self): total_pkts = self.total_pkts * 10 try: s1 = STLStream(name = 'rx', packet = self.pkt, flow_stats = STLFlowLatencyStats(pg_id = 5), mode = STLTXSingleBurst(total_pkts = total_pkts, percentage = self.rate_lat )) # add both streams to ports self.c.add_streams([s1], ports = [self.tx_port]) print("\ninjecting {0} packets on port {1}\n".format(total_pkts, self.tx_port)) exp = {'pg_id': 5, 'total_pkts': total_pkts, 'pkt_len': self.pkt.get_pkt_len()} self.__rx_iteration( [exp] ) except STLError as e: assert False , '{0}'.format(e) def test_multiple_streams(self): num_latency_streams = 128 num_flow_stat_streams = 127 total_pkts = int(self.total_pkts / (num_latency_streams + num_flow_stat_streams)) if total_pkts == 0: total_pkts = 1 percent = float(self.rate_lat) / (num_latency_streams + num_flow_stat_streams) try: streams = [] exp = [] # 10 identical streams for pg_id in range(1, num_latency_streams): streams.append(STLStream(name = 'rx {0}'.format(pg_id), packet = self.pkt, flow_stats = STLFlowLatencyStats(pg_id = pg_id), mode = STLTXSingleBurst(total_pkts = total_pkts+pg_id, percentage = percent))) exp.append({'pg_id': pg_id, 'total_pkts': total_pkts+pg_id, 'pkt_len': self.pkt.get_pkt_len()}) for pg_id in range(num_latency_streams + 1, num_latency_streams + num_flow_stat_streams): streams.append(STLStream(name = 'rx {0}'.format(pg_id), packet = self.pkt, flow_stats = STLFlowStats(pg_id = pg_id), mode = STLTXSingleBurst(total_pkts = total_pkts+pg_id, percentage = percent))) exp.append({'pg_id': pg_id, 'total_pkts': total_pkts+pg_id, 'pkt_len': self.pkt.get_pkt_len()}) # add both streams to ports self.c.add_streams(streams, ports = [self.tx_port]) self.__rx_iteration(exp) except STLError as e: assert False , '{0}'.format(e) def test_1_stream_many_iterations (self): total_pkts = self.total_pkts try: s1 = STLStream(name = 'rx', packet = self.pkt, flow_stats = STLFlowStats(pg_id = 5), mode = STLTXSingleBurst(total_pkts = total_pkts, percentage = self.rate_percent )) s_lat = STLStream(name = 'rx', packet = self.pkt, flow_stats = STLFlowLatencyStats(pg_id = 5), mode = STLTXSingleBurst(total_pkts = total_pkts, percentage = self.rate_lat )) print("\ninjecting {0} packets on port {1}\n".format(total_pkts, self.tx_port)) exp = {'pg_id': 5, 'total_pkts': total_pkts, 'pkt_len': self.pkt.get_pkt_len()} exp_lat = {'pg_id': 5, 'total_pkts': total_pkts, 'pkt_len': self.pkt.get_pkt_len()} self.c.add_streams([s1], ports = [self.tx_port]) for i in range(0, 10): print("starting iteration {0}".format(i)) self.__rx_iteration( [exp] ) self.c.remove_all_streams(ports = [self.tx_port]) self.c.add_streams([s_lat], ports = [self.tx_port]) for i in range(0, 10): print("starting iteration {0} latency".format(i)) self.__rx_iteration( [exp_lat] ) except STLError as e: assert False , '{0}'.format(e) def __test_9k_stream(self,pgid,ports,precet,max_latency,avg_latency,duration,pkt_size): my_pg_id=pgid s_ports=ports; all_ports=list(CTRexScenario.stl_ports_map['map'].keys()); if ports == None: s_ports=all_ports assert( type(s_ports)==list) stream_pkt = STLPktBuilder(pkt = Ether()/IP(src="16.0.0.1",dst="48.0.0.1")/UDP(dport=12,sport=1025)/('a'*pkt_size)) try: # reset all ports self.c.reset(ports = all_ports) for pid in s_ports: s1 = STLStream(name = 'rx', packet = self.pkt, flow_stats = STLFlowLatencyStats(pg_id = my_pg_id+pid), mode = STLTXCont(pps = 1000)) s2 = STLStream(name = 'bulk', packet = stream_pkt, mode = STLTXCont(percentage =precet)) # add both streams to ports self.c.add_streams([s1,s2], ports = [pid]) self.c.clear_stats() self.c.start(ports = s_ports,duration = duration) self.c.wait_on_traffic(ports = s_ports,timeout = duration+10,rx_delay_ms = 100) stats = self.c.get_stats() for pid in s_ports: latency_stats = stats['latency'].get(my_pg_id+pid) #pprint.pprint(latency_stats) if self.__verify_latency (latency_stats,max_latency,avg_latency) !=0: return (ERROR_LATENCY_TOO_HIGH); return 0 except STLError as e: assert False , '{0}'.format(e) # check low latency when you have stream of 9K stream def test_9k_stream(self): if self.latency_9k_enable == False: print("SKIP") return for i in range(0,5): print("Iteration {0}".format(i)); duration=random.randint(10, 70); pgid=random.randint(1, 65000); pkt_size=random.randint(1000, 9000); all_ports = list(CTRexScenario.stl_ports_map['map'].keys()); s_port=random.sample(all_ports, random.randint(1, len(all_ports)) ) s_port=sorted(s_port) if self.speed == 40 : # the NIC does not support all full rate in case both port works let's filter odd ports tmp_l=[] for port in s_port: if ((int(port) % 2) ==0): tmp_l.append(port); s_port=tmp_l; if len(s_port)==0: s_port=[0]; error=1; for j in range(0,5): print(" {4} - duration {0} pgid {1} pkt_size {2} s_port {3} ".format(duration,pgid,pkt_size,s_port,j)); if self.__test_9k_stream(pgid, s_port,90, self.latency_9k_max_latency, self.latency_9k_max_average, duration, pkt_size)==0: error=0; break; if error: assert False , "Latency too high" else: print("===>Iteration {0} PASS {1}".format(i,j)); # this test adds more and more latency streams and re-test with incremental def test_incremental_latency_streams (self): total_pkts = self.total_pkts percent = 0.5 try: # We run till maximum streams allowed. At some point, expecting drops, because rate is too high. # then run with less streams again, to see that system is still working. for num_iter in [128, 5]: exp = [] for i in range(1, num_iter): # mix small and large packets if i % 2 != 0: my_pkt = self.pkt else: my_pkt = self.large_pkt s1 = STLStream(name = 'rx', packet = my_pkt, flow_stats = STLFlowLatencyStats(pg_id = i), mode = STLTXSingleBurst(total_pkts = total_pkts, percentage = percent )) # add both streams to ports self.c.add_streams([s1], ports = [self.tx_port]) total_percent = i * percent if total_percent > self.rate_lat: self.drops_expected = True else: self.drops_expected = False print("port {0} : {1} streams at {2}% of line rate\n".format(self.tx_port, i, total_percent)) exp.append({'pg_id': i, 'total_pkts': total_pkts, 'pkt_len': my_pkt.get_pkt_len()}) self.__rx_iteration( exp ) self.c.remove_all_streams(ports = [self.tx_port]) except STLError as e: assert False , '{0}'.format(e)