/*- * BSD LICENSE * * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. * Copyright(c) 2012-2013 6WIND S.A. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "eal_private.h" #include "eal_internal_cfg.h" enum timer_source eal_timer_source = EAL_TIMER_HPET; #ifdef RTE_LIBEAL_USE_HPET #define DEV_HPET "/dev/hpet" /* Maximum number of counters. */ #define HPET_TIMER_NUM 3 /* General capabilities register */ #define CLK_PERIOD_SHIFT 32 /* Clock period shift. */ #define CLK_PERIOD_MASK 0xffffffff00000000ULL /* Clock period mask. */ /** * HPET timer registers. From the Intel IA-PC HPET (High Precision Event * Timers) Specification. */ struct eal_hpet_regs { /* Memory-mapped, software visible registers */ uint64_t capabilities; /**< RO General Capabilities Register. */ uint64_t reserved0; /**< Reserved for future use. */ uint64_t config; /**< RW General Configuration Register. */ uint64_t reserved1; /**< Reserved for future use. */ uint64_t isr; /**< RW Clear General Interrupt Status. */ uint64_t reserved2[25]; /**< Reserved for future use. */ union { uint64_t counter; /**< RW Main Counter Value Register. */ struct { uint32_t counter_l; /**< RW Main Counter Low. */ uint32_t counter_h; /**< RW Main Counter High. */ }; }; uint64_t reserved3; /**< Reserved for future use. */ struct { uint64_t config; /**< RW Timer Config and Capability Reg. */ uint64_t comp; /**< RW Timer Comparator Value Register. */ uint64_t fsb; /**< RW FSB Interrupt Route Register. */ uint64_t reserved4; /**< Reserved for future use. */ } timers[HPET_TIMER_NUM]; /**< Set of HPET timers. */ }; /* Mmap'd hpet registers */ static volatile struct eal_hpet_regs *eal_hpet = NULL; /* Period at which the HPET counter increments in * femtoseconds (10^-15 seconds). */ static uint32_t eal_hpet_resolution_fs = 0; /* Frequency of the HPET counter in Hz */ static uint64_t eal_hpet_resolution_hz = 0; /* Incremented 4 times during one 32bits hpet full count */ static uint32_t eal_hpet_msb; static pthread_t msb_inc_thread_id; /* * This function runs on a specific thread to update a global variable * containing used to process MSB of the HPET (unfortunatelly, we need * this because hpet is 32 bits by default under linux). */ static void hpet_msb_inc(__attribute__((unused)) void *arg) { uint32_t t; while (1) { t = (eal_hpet->counter_l >> 30); if (t != (eal_hpet_msb & 3)) eal_hpet_msb ++; sleep(10); } } uint64_t rte_get_hpet_hz(void) { if(internal_config.no_hpet) rte_panic("Error, HPET called, but no HPET present\n"); return eal_hpet_resolution_hz; } uint64_t rte_get_hpet_cycles(void) { uint32_t t, msb; uint64_t ret; if(internal_config.no_hpet) rte_panic("Error, HPET called, but no HPET present\n"); t = eal_hpet->counter_l; msb = eal_hpet_msb; ret = (msb + 2 - (t >> 30)) / 4; ret <<= 32; ret += t; return ret; } #endif #ifdef RTE_LIBEAL_USE_HPET /* * Open and mmap /dev/hpet (high precision event timer) that will * provide our time reference. */ int rte_eal_hpet_init(int make_default) { int fd, ret; char thread_name[RTE_MAX_THREAD_NAME_LEN]; if (internal_config.no_hpet) { RTE_LOG(NOTICE, EAL, "HPET is disabled\n"); return -1; } fd = open(DEV_HPET, O_RDONLY); if (fd < 0) { RTE_LOG(ERR, EAL, "ERROR: Cannot open "DEV_HPET": %s!\n", strerror(errno)); internal_config.no_hpet = 1; return -1; } eal_hpet = mmap(NULL, 1024, PROT_READ, MAP_SHARED, fd, 0); if (eal_hpet == MAP_FAILED) { RTE_LOG(ERR, EAL, "ERROR: Cannot mmap "DEV_HPET"!\n" "Please enable CONFIG_HPET_MMAP in your kernel configuration " "to allow HPET support.\n" "To run without using HPET, set CONFIG_RTE_LIBEAL_USE_HPET=n " "in your build configuration or use '--no-hpet' EAL flag.\n"); close(fd); internal_config.no_hpet = 1; return -1; } close(fd); eal_hpet_resolution_fs = (uint32_t)((eal_hpet->capabilities & CLK_PERIOD_MASK) >> CLK_PERIOD_SHIFT); eal_hpet_resolution_hz = (1000ULL*1000ULL*1000ULL*1000ULL*1000ULL) / (uint64_t)eal_hpet_resolution_fs; RTE_LOG(INFO, EAL, "HPET frequency is ~%"PRIu64" kHz\n", eal_hpet_resolution_hz/1000); eal_hpet_msb = (eal_hpet->counter_l >> 30); /* create a thread that will increment a global variable for * msb (hpet is 32 bits by default under linux) */ ret = pthread_create(&msb_inc_thread_id, NULL, (void *(*)(void *))hpet_msb_inc, NULL); if (ret != 0) { RTE_LOG(ERR, EAL, "ERROR: Cannot create HPET timer thread!\n"); internal_config.no_hpet = 1; return -1; } /* * Set thread_name for aid in debugging. */ snprintf(thread_name, RTE_MAX_THREAD_NAME_LEN, "hpet-msb-inc"); ret = rte_thread_setname(msb_inc_thread_id, thread_name); if (ret != 0) RTE_LOG(ERR, EAL, "ERROR: Cannot set HPET timer thread name!\n"); if (make_default) eal_timer_source = EAL_TIMER_HPET; return 0; } #endif static void check_tsc_flags(void) { char line[512]; FILE *stream; stream = fopen("/proc/cpuinfo", "r"); if (!stream) { RTE_LOG(WARNING, EAL, "WARNING: Unable to open /proc/cpuinfo\n"); return; } while (fgets(line, sizeof line, stream)) { char *constant_tsc; char *nonstop_tsc; if (strncmp(line, "flags", 5) != 0) continue; constant_tsc = strstr(line, "constant_tsc"); nonstop_tsc = strstr(line, "nonstop_tsc"); if (!constant_tsc || !nonstop_tsc) RTE_LOG(WARNING, EAL, "WARNING: cpu flags " "constant_tsc=%s " "nonstop_tsc=%s " "-> using unreliable clock cycles !\n", constant_tsc ? "yes":"no", nonstop_tsc ? "yes":"no"); break; } fclose(stream); } uint64_t get_tsc_freq(void) { #ifdef CLOCK_MONOTONIC_RAW #define NS_PER_SEC 1E9 struct timespec sleeptime = {.tv_nsec = 5E8 }; /* 1/2 second */ struct timespec t_start, t_end; uint64_t tsc_hz; if (clock_gettime(CLOCK_MONOTONIC_RAW, &t_start) == 0) { uint64_t ns, end, start = rte_rdtsc(); nanosleep(&sleeptime,NULL); clock_gettime(CLOCK_MONOTONIC_RAW, &t_end); end = rte_rdtsc(); ns = ((t_end.tv_sec - t_start.tv_sec) * NS_PER_SEC); ns += (t_end.tv_nsec - t_start.tv_nsec); double secs = (double)ns/NS_PER_SEC; tsc_hz = (uint64_t)((end - start)/secs); return tsc_hz; } #endif return 0; } int rte_eal_timer_init(void) { eal_timer_source = EAL_TIMER_TSC; set_tsc_freq(); check_tsc_flags(); return 0; }