docs: vnet comment nitfixes

Type: improvement

Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>

15 files changed, 108 insertions, 84 deletions

diff --git a/src/vnet/adj/adj_midchain.h b/src/vnet/adj/adj_midchain.h
index 5fb0ee8efb3..85294122f08 100644
--- a/src/vnet/adj/adj_midchain.h
+++ b/src/vnet/adj/adj_midchain.h
@@ -99,7 +99,7 @@ extern void adj_nbr_midchain_stack(adj_index_t adj_index,
  *  The FIB entry to stack on
  *
  * @param fct
- *  The chain type to use from the fib entry fowarding
+ *  The chain type to use from the fib entry forwarding
  */
 extern void adj_nbr_midchain_stack_on_fib_entry(adj_index_t adj_index,
                                                 fib_node_index_t fei,
diff --git a/src/vnet/classify/vnet_classify.c b/src/vnet/classify/vnet_classify.c
index 0b819db3573..4fb4f336582 100644
--- a/src/vnet/classify/vnet_classify.c
+++ b/src/vnet/classify/vnet_classify.c
@@ -2043,7 +2043,7 @@ vlib_enable_disable_pkt_trace_filter (int enable)
  * It's reasonably likely that folks will configure a single
  * table with one or two matches. As a result, we configure
  * 8 hash buckets and 128K of match rule space. One can override
- * the defaults by specifiying "buckets <nnn>" and "memory-size <xxx>"
+ * the defaults by specifying "buckets <nnn>" and "memory-size <xxx>"
  * as desired.
  *
  * To build up complex filter chains, repeatedly issue the
@@ -2079,16 +2079,18 @@ vlib_enable_disable_pkt_trace_filter (int enable)
  *
  * Configure a simple classify filter, and configure pcap rx trace to use it:
  *
- * <b><em>classify filter rx mask l3 ip4 src match l3 ip4 src 192.168.1.11"</em></b><br>
+ * @cliexcmd{classify filter rx mask l3 ip4 src match l3 ip4 src 192.168.1.11}
  * <b><em>pcap rx trace on max 100 filter</em></b>
  *
  * Configure another fairly simple filter
  *
- * <b><em>classify filter mask l3 ip4 src dst match l3 ip4 src 192.168.1.10 dst 192.168.2.10"</em></b>
+ * @cliexcmd{classify filter mask l3 ip4 src dst match l3 ip4 src 192.168.1.10
+ * dst 192.168.2.10}
  *
  *
  * Configure a filter for use with the vpp packet tracer:
- * <b><em>classify filter trace mask l3 ip4 src dst match l3 ip4 src 192.168.1.10 dst 192.168.2.10"</em></b>
+ * @cliexcmd{classify filter trace mask l3 ip4 src dst match l3 ip4 src
+ * 192.168.1.10 dst 192.168.2.10}
  * <b><em>trace add dpdk-input 100 filter</em></b>
  *
  * Clear classifier filters
@@ -2096,7 +2098,7 @@ vlib_enable_disable_pkt_trace_filter (int enable)
  * <b><em>classify filter [trace | rx | tx  | <intfc>] del</em></b>
  *
  * To display the top-level classifier tables for each use case:
- * <b><em>show classify filter</em/></b>
+ * <b><em>show classify filter</em></b>
  *
  * To inspect the classifier tables, use
  *
diff --git a/src/vnet/devices/virtio/vhost_user.c b/src/vnet/devices/virtio/vhost_user.c
index 089e08aabb4..cd37d4c59f8 100644
--- a/src/vnet/devices/virtio/vhost_user.c
+++ b/src/vnet/devices/virtio/vhost_user.c
@@ -2343,23 +2343,25 @@ done:
  *
  * There are several parameters associated with a vHost interface:
  *
- * - <b>socket <socket-filename></b> - Name of the linux socket used by hypervisor
- * and VPP to manage the vHost interface. If in '<em>server</em>' mode, VPP will
- * create the socket if it does not already exist. If in '<em>client</em>' mode,
- * hypervisor will create the socket if it does not already exist. The VPP code
- * is indifferent to the file location. However, if SELinux is enabled, then the
- * socket needs to be created in '<em>/var/run/vpp/</em>'.
+ * - <b>socket <socket-filename></b> - Name of the linux socket used by
+ * hypervisor and VPP to manage the vHost interface. If in <em>server</em>
+ * mode, VPP will create the socket if it does not already exist. If in
+ * <em>client</em> mode, hypervisor will create the socket if it does not
+ * already exist. The VPP code is indifferent to the file location. However,
+ * if SELinux is enabled, then the socket needs to be created in
+ * <em>/var/run/vpp/</em>.
  *
- * - <b>server</b> - Optional flag to indicate that VPP should be the server for
- * the linux socket. If not provided, VPP will be the client. In '<em>server</em>'
- *  mode, the VM can be reset without tearing down the vHost Interface. In
- * '<em>client</em>' mode, VPP can be reset without bringing down the VM and
- * tearing down the vHost Interface.
+ * - <b>server</b> - Optional flag to indicate that VPP should be the server
+ * for the linux socket. If not provided, VPP will be the client. In
+ * <em>server</em> mode, the VM can be reset without tearing down the vHost
+ * Interface. In <em>client</em> mode, VPP can be reset without bringing down
+ * the VM and tearing down the vHost Interface.
  *
- * - <b>feature-mask <hex></b> - Optional virtio/vhost feature set negotiated at
- * startup. <b>This is intended for degugging only.</b> It is recommended that this
- * parameter not be used except by experienced users. By default, all supported
- * features will be advertised. Otherwise, provide the set of features desired.
+ * - <b>feature-mask <hex></b> - Optional virtio/vhost feature set negotiated
+ * at startup. <b>This is intended for degugging only.</b> It is recommended
+ * that this parameter not be used except by experienced users. By default,
+ * all supported features will be advertised. Otherwise, provide the set of
+ * features desired.
  *   - 0x000008000 (15) - VIRTIO_NET_F_MRG_RXBUF
  *   - 0x000020000 (17) - VIRTIO_NET_F_CTRL_VQ
  *   - 0x000200000 (21) - VIRTIO_NET_F_GUEST_ANNOUNCE
@@ -2373,18 +2375,21 @@ done:
  * - <b>hwaddr <mac-addr></b> - Optional ethernet address, can be in either
  * X:X:X:X:X:X unix or X.X.X cisco format.
  *
- * - <b>renumber <dev_instance></b> - Optional parameter which allows the instance
- * in the name to be specified. If instance already exists, name will be used
- * anyway and multiple instances will have the same name. Use with caution.
+ * - <b>renumber <dev_instance></b> - Optional parameter which allows the
+ * instance in the name to be specified. If instance already exists, name
+ * will be used anyway and multiple instances will have the same name. Use
+ * with caution.
  *
  * @cliexpar
- * Example of how to create a vhost interface with VPP as the client and all features enabled:
+ * Example of how to create a vhost interface with VPP as the client and all
+ * features enabled:
  * @cliexstart{create vhost-user socket /var/run/vpp/vhost1.sock}
  * VirtualEthernet0/0/0
  * @cliexend
- * Example of how to create a vhost interface with VPP as the server and with just
- * multiple queues enabled:
- * @cliexstart{create vhost-user socket /var/run/vpp/vhost2.sock server feature-mask 0x40400000}
+ * Example of how to create a vhost interface with VPP as the server and with
+ * just multiple queues enabled:
+ * @cliexstart{create vhost-user socket /var/run/vpp/vhost2.sock server
+ * feature-mask 0x40400000}
  * VirtualEthernet0/0/1
  * @cliexend
  * Once the vHost interface is created, enable the interface using:
@@ -2422,9 +2427,9 @@ VLIB_CLI_COMMAND (vhost_user_delete_command, static) = {
 
 /*?
  * Display the attributes of a single vHost User interface (provide interface
- * name), multiple vHost User interfaces (provide a list of interface names seperated
- * by spaces) or all Vhost User interfaces (omit an interface name to display all
- * vHost interfaces).
+ * name), multiple vHost User interfaces (provide a list of interface names
+ * separated by spaces) or all Vhost User interfaces (omit an interface name
+ * to display all vHost interfaces).
  *
  * @cliexpar
  * @parblock
@@ -2458,10 +2463,10 @@ VLIB_CLI_COMMAND (vhost_user_delete_command, static) = {
  *    thread 2 on vring 0
  *
  * Memory regions (total 2)
- * region fd    guest_phys_addr    memory_size        userspace_addr     mmap_offset        mmap_addr
- * ====== ===== ================== ================== ================== ================== ==================
- *   0     60    0x0000000000000000 0x00000000000a0000 0x00002aaaaac00000 0x0000000000000000 0x00002aab2b400000
- *   1     61    0x00000000000c0000 0x000000003ff40000 0x00002aaaaacc0000 0x00000000000c0000 0x00002aababcc0000
+ * region fd guest_phys_addr memory_size userspace_addr mmap_offset mmap_addr
+ * ====== == =============== =========== ============== =========== ==========
+ *   0    60  0x00000000     0x000a0000  0xaac00000     0x00000000  0x2b400000
+ *   1    61  0x000c0000     0x3ff40000  0xaacc0000     0x000c0000  0xabcc0000
  *
  *  Virtqueue 0 (TX)
  *   qsz 256 last_avail_idx 0 last_used_idx 0
@@ -2505,8 +2510,9 @@ VLIB_CLI_COMMAND (vhost_user_delete_command, static) = {
  *
  * @cliexend
  *
- * The optional '<em>descriptors</em>' parameter will display the same output as
- * the previous example but will include the descriptor table for each queue.
+ * The optional '<em>descriptors</em>' parameter will display the same output
+ * as the previous example but will include the descriptor table for each
+ * queue.
  * The output is truncated below:
  * @cliexstart{show vhost-user VirtualEthernet0/0/0 descriptors}
  * Virtio vhost-user interfaces
diff --git a/src/vnet/ethernet/node.c b/src/vnet/ethernet/node.c
index cc0a0c30b9c..214e68809cc 100644
--- a/src/vnet/ethernet/node.c
+++ b/src/vnet/ethernet/node.c
@@ -1897,7 +1897,7 @@ ethernet_sw_interface_get_config (vnet_main_t * vnm,
 	    }
 	  else
 	    {
-	      // a specific outer + specifc innner vlan id, a common case
+	      // a specific outer + specific innner vlan id, a common case
 
 	      // get the qinq table
 	      if (vlan_table->vlans[si->sub.eth.outer_vlan_id].qinqs == 0)
diff --git a/src/vnet/interface_cli.c b/src/vnet/interface_cli.c
index 2f231c117db..4f6f2cf05a5 100644
--- a/src/vnet/interface_cli.c
+++ b/src/vnet/interface_cli.c
@@ -941,7 +941,6 @@ done:
   return error;
 }
 
-
 /*?
  * This command is used to change the admin state (up/down) of an interface.
  *
@@ -951,9 +950,11 @@ done:
  * '<em>punt</em>' flag (interface is still down).
  *
  * @cliexpar
- * Example of how to configure the admin state of an interface to '<em>up</em?':
+ * Example of how to configure the admin state of an interface to
+ '<em>up</em>':
  * @cliexcmd{set interface state GigabitEthernet2/0/0 up}
- * Example of how to configure the admin state of an interface to '<em>down</em?':
+ * Example of how to configure the admin state of an interface to
+ '<em>down</em>':
  * @cliexcmd{set interface state GigabitEthernet2/0/0 down}
  ?*/
 /* *INDENT-OFF* */
@@ -2392,7 +2393,7 @@ pcap_trace_command_fn (vlib_main_t * vm,
  * @cliexend
  * Example of how to start a tx packet capture:
  * @cliexstart{pcap trace tx max 35 intfc GigabitEthernet0/8/0 file
-vppTest.pcap}
+ * vppTest.pcap}
  * @cliexend
  * Example of how to display the status of a tx packet capture in progress:
  * @cliexstart{pcap trace status}
diff --git a/src/vnet/ip/ip4_source_and_port_range_check.c b/src/vnet/ip/ip4_source_and_port_range_check.c
index 00ab51e2440..4c311eb8335 100644
--- a/src/vnet/ip/ip4_source_and_port_range_check.c
+++ b/src/vnet/ip/ip4_source_and_port_range_check.c
@@ -749,7 +749,8 @@ set_ip_source_and_port_range_check_fn (vlib_main_t * vm,
  * @cliexend
  *
  * Example of how to enable range checking on TX:
- * @cliexcmd{set interface ip source-and-port-range-check GigabitEthernet2/0/0 udp-in-vrf 7}
+ * @cliexcmd{set interface ip source-and-port-range-check GigabitEthernet2/0/0
+ * udp-in-vrf 7}
  *
  * Example of graph node after range checking is enabled:
  * @cliexstart{show vlib graph ip4-source-and-port-range-check-tx}
@@ -758,7 +759,7 @@ set_ip_source_and_port_range_check_fn (vlib_main_t * vm,
  *                              interface-output [1]
  * @cliexend
  *
- * Example of how to display the features enabed on an interface:
+ * Example of how to display the features enabled on an interface:
  * @cliexstart{show ip interface features GigabitEthernet2/0/0}
  * IP feature paths configured on GigabitEthernet2/0/0...
  *
@@ -1367,7 +1368,7 @@ show_source_and_port_range_check_fn (vlib_main_t * vm,
  * @cliexstart{show ip source-and-port-range-check vrf 7 172.16.2.0}
  * 172.16.2.0: 23 - 101
  * @cliexend
- * Example of how to test to determine of a given Pv4 address and port
+ * Example of how to test to determine of a given iPv4 address and port
  * are being validated:
  * @cliexstart{show ip source-and-port-range-check vrf 7 172.16.2.2 port 23}
  * 172.16.2.2 port 23 PASS
diff --git a/src/vnet/ip6-nd/ip6_ra.c b/src/vnet/ip6-nd/ip6_ra.c
index 895f3092820..d3597706293 100644
--- a/src/vnet/ip6-nd/ip6_ra.c
+++ b/src/vnet/ip6-nd/ip6_ra.c
@@ -2175,7 +2175,6 @@ format_ip6_ra (u8 * s, va_list * args)
   return (s);
 }
 
-
 /*?
  * This command is used to configure the neighbor discovery
  * parameters on a given interface. Use the '<em>show ip6 interface</em>'
@@ -2183,9 +2182,16 @@ format_ip6_ra (u8 * s, va_list * args)
  * on a given interface. This command has three formats:
  *
  *
- * <b>Format 1 - Router Advertisement Options:</b> (Only one can be entered in a single command)
+ * <b>Format 1 - Router Advertisement Options:</b> (Only one can be entered in
+ * a single command)
  *
- * '<em><b>ip6 nd <interface> [no] [ra-managed-config-flag] | [ra-other-config-flag] | [ra-suppress] | [ra-suppress-link-layer] | [ra-send-unicast] | [ra-lifetime <lifetime>] | [ra-initial <cnt> <interval>] | [ra-interval <max-interval> [<min-interval>]] | [ra-cease]</b></em>'
+ * @clistart
+ * ip6 nd <interface> [no] [ra-managed-config-flag] |
+ *   [ra-other-config-flag] | [ra-suppress] | [ra-suppress-link-layer] |
+ *   [ra-send-unicast] | [ra-lifetime <lifetime>] |
+ *   [ra-initial <cnt> <interval>] |
+ *   [ra-interval <max-interval> [<min-interval>]] | [ra-cease]
+ * @cliend
  *
  * Where:
  *
@@ -2211,7 +2217,7 @@ format_ip6_ra (u8 * s, va_list * args)
  * and the '<em>no</em>' option returns it to this default state.
  *
  * <em>[no] ra-send-unicast</em> - Use the source address of the
- * router-solicitation message if availiable. The default is to use
+ * router-solicitation message if available. The default is to use
  * multicast address of all nodes, and the '<em>no</em>' option returns
  * it to this default state.
  *
@@ -2242,52 +2248,60 @@ format_ip6_ra (u8 * s, va_list * args)
  *
  * <b>Format 2 - Prefix Options:</b>
  *
- * '<em><b>ip6 nd <interface> [no] prefix <ip6-address>/<width> [<valid-lifetime> <pref-lifetime> | infinite] [no-advertise] [off-link] [no-autoconfig] [no-onlink]</b></em>'
+ * @clistart
+ * ip6 nd <interface> [no] prefix <ip6-address>/<width>
+ *   [<valid-lifetime> <pref-lifetime> | infinite] [no-advertise] [off-link]
+ *   [no-autoconfig] [no-onlink]
+ * @cliend
  *
  * Where:
  *
  * <em>no</em> - All additional flags are ignored and the prefix is deleted.
  *
- * <em><valid-lifetime> <pref-lifetime></em> - '<em><valid-lifetime></em>' is the
- * length of time in seconds during what the prefix is valid for the purpose of
- * on-link determination. Range is 7203 to 2592000 seconds and default is 2592000
- * seconds (30 days). '<em><pref-lifetime></em>' is the prefered-lifetime and is the
- * length of time in seconds during what addresses generated from the prefix remain
- * preferred. Range is 0 to 604800 seconds and default is 604800 seconds (7 days).
+ * <em><valid-lifetime> <pref-lifetime></em> - '<em><valid-lifetime></em>' is
+ * the length of time in seconds during what the prefix is valid for the
+ * purpose of on-link determination. Range is 7203 to 2592000 seconds and
+ * default is 2592000 seconds (30 days). '<em><pref-lifetime></em>' is the
+ * preferred-lifetime and is the length of time in seconds during what
+ * addresses generated from the prefix remain preferred. Range is 0 to 604800
+ * seconds and default is 604800 seconds (7 days).
  *
- * <em>infinite</em> - Both '<em><valid-lifetime></em>' and '<em><<pref-lifetime></em>'
- * are inifinte, no timeout.
+ * <em>infinite</em> - Both '<em><valid-lifetime></em>' and
+ * '<em><pref-lifetime></em>' are infinite, no timeout.
  *
  * <em>no-advertise</em> - Do not send full router address in prefix
  * advertisement. Default is to advertise (i.e. - This flag is off by default).
  *
- * <em>off-link</em> - Prefix is off-link, clear L-bit in packet. Default is on-link
- * (i.e. - This flag is off and L-bit in packet is set by default and this prefix can
- * be used for on-link determination). '<em>no-onlink</em>' also controls the L-bit.
+ * <em>off-link</em> - Prefix is off-link, clear L-bit in packet. Default is
+ * on-link (i.e. - This flag is off and L-bit in packet is set by default
+ * and this prefix can be used for on-link determination). '<em>no-onlink</em>'
+ * also controls the L-bit.
  *
- * <em>no-autoconfig</em> - Do not use prefix for autoconfiguration, clear A-bit in packet.
- * Default is autoconfig (i.e. - This flag is off and A-bit in packet is set by default.
+ * <em>no-autoconfig</em> - Do not use prefix for autoconfiguration, clear
+ * A-bit in packet. Default is autoconfig (i.e. - This flag is off and A-bit
+ * in packet is set by default.
  *
- * <em>no-onlink</em> - Do not use prefix for onlink determination, clear L-bit in packet.
- * Default is on-link (i.e. - This flag is off and L-bit in packet is set by default and
- * this prefix can be used for on-link determination). '<em>off-link</em>' also controls
- * the L-bit.
+ * <em>no-onlink</em> - Do not use prefix for onlink determination, clear L-bit
+ * in packet. Default is on-link (i.e. - This flag is off and L-bit in packet
+ * is set by default and this prefix can be used for on-link determination).
+ * '<em>off-link</em>' also controls the L-bit.
  *
  *
  * <b>Format 3: - Default of Prefix:</b>
  *
- * '<em><b>ip6 nd <interface> [no] prefix <ip6-address>/<width> default</b></em>'
+ * @cliexcmd{ip6 nd <interface> [no] prefix <ip6-address>/<width> default}
  *
- * When a new prefix is added (or existing one is being overwritten) <em>default</em>
- * uses default values for the prefix. If <em>no</em> is used, the <em>default</em>
- * is ignored and the prefix is deleted.
+ * When a new prefix is added (or existing one is being overwritten)
+ * <em>default</em> uses default values for the prefix. If <em>no</em> is
+ * used, the <em>default</em> is ignored and the prefix is deleted.
  *
  *
  * @cliexpar
  * Example of how set a router advertisement option:
  * @cliexcmd{ip6 nd GigabitEthernet2/0/0 ra-interval 100 20}
  * Example of how to add a prefix:
- * @cliexcmd{ip6 nd GigabitEthernet2/0/0 prefix fe80::fe:28ff:fe9c:75b3/64 infinite no-advertise}
+ * @cliexcmd{ip6 nd GigabitEthernet2/0/0 prefix fe80::fe:28ff:fe9c:75b3/64
+ * infinite no-advertise}
  * Example of how to delete a prefix:
  * @cliexcmd{ip6 nd GigabitEthernet2/0/0 no prefix fe80::fe:28ff:fe9c:75b3/64}
 ?*/
diff --git a/src/vnet/ipsec/ipsec.rst b/src/vnet/ipsec/ipsec.rst
index d7e02740fc3..933d0852a07 100644
--- a/src/vnet/ipsec/ipsec.rst
+++ b/src/vnet/ipsec/ipsec.rst
@@ -2,8 +2,8 @@
 
 .. toctree::
 
-IP Security
-===========
+IPSec (IP Security)
+===================
 
 This is not a description on how IPSec works. Please read:
 
diff --git a/src/vnet/l2/l2_rw.c b/src/vnet/l2/l2_rw.c
index b6de2faffc5..2c008794c1b 100644
--- a/src/vnet/l2/l2_rw.c
+++ b/src/vnet/l2/l2_rw.c
@@ -588,7 +588,7 @@ l2_rw_set_cli_fn (vlib_main_t * vm,
 
 /*?
  * Layer 2-Rewrite node uses classify tables to match packets. Then, using
- * the provisioned mask and value, modfies the packet header.
+ * the provisioned mask and value, modifies the packet header.
  *
  * @cliexpar
  * @todo This is incomplete. This needs a detailed description and a
diff --git a/src/vnet/mpls/interface.c b/src/vnet/mpls/interface.c
index fd075c92d3d..e6c3dfeb801 100644
--- a/src/vnet/mpls/interface.c
+++ b/src/vnet/mpls/interface.c
@@ -128,7 +128,7 @@ mpls_interface_enable_disable (vlib_main_t * vm,
 }
 
 /*?
- * This command enables an interface to accpet MPLS packets
+ * This command enables an interface to accept MPLS packets
  *
  * @cliexpar
  * @cliexstart{set interface mpls}
diff --git a/src/vnet/qos/qos.api b/src/vnet/qos/qos.api
index d655165cef2..84addf0e449 100644
--- a/src/vnet/qos/qos.api
+++ b/src/vnet/qos/qos.api
@@ -57,7 +57,7 @@ typedef qos_store
 /**
  * Enable/Disable QoS storing
  * The QoS bits from the packet at the specified input layer are copied
- * into the packet. Storeing should be used in conjunction with marking
+ * into the packet. Storing should be used in conjunction with marking
  * @param enable - enable=1 or disable the feature
  * @param store - Store configuration
  */
diff --git a/src/vnet/qos/qos_store.c b/src/vnet/qos/qos_store.c
index 06336434e5d..1e8a53bbdfc 100644
--- a/src/vnet/qos/qos_store.c
+++ b/src/vnet/qos/qos_store.c
@@ -55,7 +55,7 @@ qos_store_feature_config (u32 sw_if_index,
     case QOS_SOURCE_MPLS:
     case QOS_SOURCE_VLAN:
     case QOS_SOURCE_EXT:
-      /* not a valid option for storeing */
+      /* not a valid option for storing */
       break;
     }
 }
@@ -127,7 +127,7 @@ qos_store_walk (qos_store_walk_cb_t fn, void *c)
 }
 
 /*
- * Disable storeing feature for all protocols when the interface
+ * Disable storing feature for all protocols when the interface
  * is deleted
  */
 static clib_error_t *
@@ -203,7 +203,7 @@ qos_store_cli (vlib_main_t * vm,
 }
 
 /*?
- * Enable QoS bit storeing on an interface using the packet's input DSCP bits
+ * Enable QoS bit storing on an interface using the packet's input DSCP bits
  * Which input QoS bits to use are either; IP, MPLS or VLAN. If more than
  * one protocol is chosen (which is foolish) the higher layers override the
  * lower.
diff --git a/src/vnet/srmpls/sr_mpls.h b/src/vnet/srmpls/sr_mpls.h
index 5b04f76b7a7..a8f9494428f 100644
--- a/src/vnet/srmpls/sr_mpls.h
+++ b/src/vnet/srmpls/sr_mpls.h
@@ -67,7 +67,7 @@ typedef struct
 
   u8 type;			/**< Type (default is 0) */
   /* SR Policy specific DPO                                       */
-  /* IF Type = DEFAULT Then Load Balancer DPO among SID lists     */
+  /* IF Type = DEFAULT Then Load-Balancer DPO among SID lists     */
   /* IF Type = SPRAY then Spray DPO with all SID lists            */
 
   ip46_address_t endpoint;		/**< Optional NH for SR TE */
diff --git a/src/vnet/srv6/sr.h b/src/vnet/srv6/sr.h
index c84534c8ae7..ea9ff709feb 100644
--- a/src/vnet/srv6/sr.h
+++ b/src/vnet/srv6/sr.h
@@ -101,7 +101,7 @@ typedef struct
 
   u8 type;					/**< Type (default is 0) */
   /* SR Policy specific DPO                                       */
-  /* IF Type = DEFAULT Then Load Balancer DPO among SID lists     */
+  /* IF Type = DEFAULT Then Load-Balancer DPO among SID lists     */
   /* IF Type = SPRAY then Spray DPO with all SID lists            */
   dpo_id_t bsid_dpo;			/**< SR Policy specific DPO - BSID */
   dpo_id_t ip4_dpo;			/**< SR Policy specific DPO - IPv6 */
diff --git a/src/vnet/srv6/sr_policy_rewrite.c b/src/vnet/srv6/sr_policy_rewrite.c
index 95de43166a1..500772e8065 100644
--- a/src/vnet/srv6/sr_policy_rewrite.c
+++ b/src/vnet/srv6/sr_policy_rewrite.c
@@ -33,7 +33,7 @@
  * Traffic input usually is IPv6 packets. However it is possible to have
  * IPv4 packets or L2 frames. (that are encapsulated into IPv6 with SRH)
  *
- * This file provides the appropiates VPP graph nodes to do any of these
+ * This file provides the appropriate VPP graph nodes to do any of these
  * methods.
  *
  */
@@ -434,7 +434,7 @@ create_sl (ip6_sr_policy_t * sr_policy, ip6_address_t * sl, u32 weight,
 }
 
 /**
- * @brief Updates the Load Balancer after an SR Policy change
+ * @brief Updates the Load-Balancer after an SR Policy change
  *
  * @param sr_policy is the modified SR Policy
  */