Reorganize source tree to use single autotools instance

Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>

4 files changed, 0 insertions, 59 deletions

diff --git a/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf b/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf
deleted file mode 100644
index dd37b942062..00000000000
--- a/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-comment { vpe_phase2 configuration }
-
-comment { local client facing interface  }
-comment { configure lc2 eth1 at e.g. 6.0.2.2/24 }
-
-set int ip table GigabitEthernet2/2/0 1
-set int ip address GigabitEthernet2/2/0 6.0.2.1/24
-set int state GigabitEthernet2/2/0 up
-
-comment { tunnel to rightpeer }
-set int ip address GigabitEthernet2/3/0 6.0.3.1/24
-set int state GigabitEthernet2/3/0 up
-
-mpls encap add label 30 fib 1 dest 6.0.4.1
-mpls decap add label 30 fib 1
-
-create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 6.0.4.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1
diff --git a/vnet/etc/scripts/mpls-o-ethernet/pg b/vnet/etc/scripts/mpls-o-ethernet/pg
deleted file mode 100644
index ba5397f7648..00000000000
--- a/vnet/etc/scripts/mpls-o-ethernet/pg
+++ /dev/null
@@ -1,10 +0,0 @@
-packet-generator new {
-  name x
-  limit 1
-  node mpls-ethernet-input
-  size 68-68
-  no-recycle
-  data {
-   hex 0x0001e1ff4500004000000000400177ba010000020200000208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627
-  }
-}
\ No newline at end of file
diff --git a/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf b/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf
deleted file mode 100644
index 7709ce4d584..00000000000
--- a/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-comment { local client facing interface }
-comment { configure lc4 eth1 at e.g. 6.0.4.4/24 }
-
-set int ip table GigabitEthernet2/4/0 1
-set int ip address GigabitEthernet2/4/0 6.0.4.1/24
-set int state GigabitEthernet2/4/0 up
-
-comment { tunnel to leftpeer }
-set int ip address GigabitEthernet2/3/0 6.0.3.3/24
-set int state GigabitEthernet2/3/0 up
-
-mpls encap add label 30 fib 1 dest 6.0.2.1
-mpls decap add label 30 fib 1
-
-create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.2.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1
diff --git a/vnet/etc/scripts/mpls-o-ethernet/single.conf b/vnet/etc/scripts/mpls-o-ethernet/single.conf
deleted file mode 100644
index 2a25d35512c..00000000000
--- a/vnet/etc/scripts/mpls-o-ethernet/single.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-comment { single node configuration }
-
-loop create
-loop create
-set int state loop0 up
-set int state loop1 up
-
-set int ip address loop0 1.0.0.1/24
-set int ip address loop1 2.0.0.1/24
-
-
-ip route add 2.2.2.2/32 via 2.0.0.2 loop1
-
-mpls encap add label 30 fib 0 dest 2.2.2.2
-mpls decap add label 30 fib 0
-
-create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 2.2.2.2/32 tx-intfc loop1 fib-id 0