1 files changed, 0 insertions, 151 deletions
diff --git a/docs/reference/cmdreference/ip/ip.rst b/docs/reference/cmdreference/ip/ip.rst
deleted file mode 100644
index a709215f45b..00000000000
--- a/docs/reference/cmdreference/ip/ip.rst
+++ /dev/null
@@ -1,151 +0,0 @@
-.. _ip1:
-
-.. toctree::
-
-.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
-
-IP Route
-==========
-
-Summary/Usage
---------------
-
-`ip route [add|del] [count <*n*>] <*dst-ip-addr*>/<*width*> [table <*table-id*>] via [next-hop-address[next-hop-interface] [next-hop-table <*value*>] [weight <*value*>] [preference <*value*>] [udp-encap-id <*value*>] [ip4-lookup-in-table <*value*>] [ip6-lookup-in-table <*value*>] [mpls-lookup-in-table <*value*>] [resolve-via-host] [resolve-via-connected] [rx-ip4 <*interface*>] [out-labels <*value value value*>]`
-
-Description
-------------
-
-This command is used to add or delete IPv4 or IPv6 routes. All IP Addresses
-('<*dst-ip-addr*>/<*width*>', '<*next-hop-ip-addr*>' and '<*adj-hop-ip-addr*>') can be IPv4 or IPv6,
-but all must be of the same form in a single command. To display the current set of routes,
-use the commands 'show ip fib' and 'show ip6 fib'.
-
-Example Usage
---------------
-
-Example of how to add a straight forward static route:
-
-.. code-block:: console
-
-    vpp# ip route add 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0
-
-Example of how to delete a straight forward static route:
-
-.. code-block:: console
-
-    vpp# ip route del 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0
-
-Mainly for route add/del performance testing, one can add or delete multiple routes by adding
-'count N' to the previous item:
-
-.. code-block:: console
-
-    vpp# ip route add count 10 7.0.0.0/24 via 6.0.0.1 GigabitEthernet2/0/0
-
-Add multiple routes for the same destination to create equal-cost multipath:
-
-.. code-block:: console
-
-    vpp# ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0
-
-    vpp# ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0
-
-For unequal-cost multipath, specify the desired weights. This combination of weights
-results in 3/4 of the traffic following the second path, 1/4 following the first path:
-
-.. code-block:: console
-
-    vpp# ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0 weight 1
-
-    vpp# ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0 weight 3
-
-To add a route to a particular FIB table (VRF), use:
-
-.. code-block:: console
-
-    vpp# ip route add 172.16.24.0/24 table 7 via GigabitEthernet2/0/0
-
-Declaration and Implementation
----------------------------------
-
-**Declaration:** ip_route_command (src/vnet/ip/lookup.c line 641)
-
-**Implementation:** vnet_ip_route_cmd
-
-Ping
-=====
-
-Summary/Usage
---------------
-
-ping {<*ip-addr*> | ipv4 <*ip4-addr*> | ipv6 <*ip6-addr*>} [ipv4 <*ip4-addr*> | ipv6 <*ip6-addr*>] [source <*interface*>] [size <*pktsize*>] [interval <*sec*>] [repeat <*cnt*>] [table-id <*id*>] [verbose]
-
-Description
-------------
-
-This command sends an ICMP ECHO_REQUEST to network hosts. The address can be an IPv4 or IPv6
-address (or both at the same time).
-
-Example Usage
---------------
-
-Example of how ping an IPv4 address:
-
-.. code-block:: console
-
-    vpp# ping 172.16.1.2 source GigabitEthernet2/0/0 repeat 2
-
-    64 bytes from 172.16.1.2: icmp_seq=1 ttl=64 time=.1090 ms
-    64 bytes from 172.16.1.2: icmp_seq=2 ttl=64 time=.0914 ms
-
-    Statistics: 2 sent, 2 received, 0% packet loss
-
-    Example of how ping both an IPv4 address and IPv6 address at the same time:
-
-    vpp# ping 172.16.1.2 ipv6 fe80::24a5:f6ff:fe9c:3a36 source GigabitEthernet2/0/0 repeat 2 verbose
-
-    Adjacency index: 10, sw_if_index: 1
-    Adj: ip6-discover-neighbor
-    Adj Interface: 0
-    Forced set interface: 1
-    Adjacency index: 0, sw_if_index: 4294967295
-    Adj: ip4-miss
-    Adj Interface: 0
-    Forced set interface: 1
-    Source address: 172.16.1.1
-    64 bytes from 172.16.1.2: icmp_seq=1 ttl=64 time=.1899 ms
-    Adjacency index: 10, sw_if_index: 1
-    Adj: ip6-discover-neighbor
-    Adj Interface: 0
-    Forced set interface: 1
-    Adjacency index: 0, sw_if_index: 4294967295
-    Adj: ip4-miss
-    Adj Interface: 0
-    Forced set interface: 1
-    Source address: 172.16.1.1
-    64 bytes from 172.16.1.2: icmp_seq=2 ttl=64 time=.0910 ms
-
-    Statistics: 4 sent, 2 received, 50% packet loss
-
-Declaration and Implementation
--------------------------------
-
-Declaration: ping_command (src/vnet/ip/ping.c line 899)
-
-Implementation: ping_ip_address
-
-Set Interface IP Address
-=========================
-
-`Set Interface IP Address <../interface/setinterface.html#set-interface-ip-address>`_
-
-Show IP Arp
-=============
-
-`Show IP-Arp <../show/show.html#show-ip-arp>`_
-
-
-Show IP Fib
-============
-
-`Show IP-Fib <../show/show.html#show-ip-fib>`_