aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14when lb tcp in2out flow,ahdj0071-0/+1
in2out and out2in protocol are not same Change-Id: I4ce680ad1f088cb079e1f2aeb15ca59225fca0d1 Signed-off-by: ahdj007 <dong.juan1@zte.com.cn> (cherry picked from commit 9691cf2d082727fb2f88e85050068dc6fd761bcd)
2018-03-14when exceed max reass,ahdj0071-6/+12
frag packet can't get reass. adding bihash,it can rewrite new hash value. so need to delete hash after compare hash value. Change-Id: I83b5c47890110e9a598b78cfbe8fcd27bbe291bb Signed-off-by: ahdj007 <dong.juan1@zte.com.cn> (cherry picked from commit 5e85c54d229e443d30dabe9bca39625587add8a5)
2018-03-14At AF_PACKET socket create, do intf bind before rx ring cfg to avoid ↵Chaoyu Jin1-12/+12
receiving pkts from other interfaces Change-Id: Ie40ee9129edaac717e716b469f4d10f3c29a4932 Signed-off-by: Chaoyu Jin <chjin@cisco.com>
2018-03-14NAT44: allow to configure one interface only as output or input feature ↵Matus Fabian1-0/+12
(VPP-1192) following is not possible: set interface nat44 out GigabitEthernet0/3/0 output-feature set interface nat44 out GigabitEthernet0/3/0 Change-Id: I1592cc18390881fda66f98316700886b8f5295f0 Signed-off-by: Matus Fabian <matfabia@cisco.com> (cherry picked from commit e4e34c23fe7050c26967997fdb8f555c51fd3961)
2018-03-09reass frag_n should to be inited to 0ahdj0071-0/+1
Change-Id: I8a4a7a85e86acbfe411e6dfa22e3976d7d4c903b Signed-off-by: ahdj007 <dong.juan1@zte.com.cn> (cherry picked from commit 9f06d0eccf06b82b42cc55f02c37cbed9e1aab83)
2018-03-08memif: fix crash caused by zero pkt len in memif and clear dirty cache while ↵Chun Li5-12/+102
interface reconnect. Change-Id: Ifc7eb2494a22c334d8899422545fca1a4bba4d05 Signed-off-by: Chun Li <chunl2@cisco.com>
2018-03-08at af_packet input, drop partial packets to prevent l4 checksum deadloop at ↵Chaoyu Jin1-4/+17
ouptut Change-Id: I6f75b7328fd0aa71d00a701e36c8b4ad06bff3c4 Signed-off-by: Chaoyu Jin <chjin@cisco.com>
2018-03-08ip4_forward: set pkt error in case potential memory corruptChun Li1-0/+2
Change-Id: Ib9eb65d2ba166f5883a8ce8d37298c696113f2be Signed-off-by: Chun Li <chunl2@cisco.com>
2018-03-07libmemif: cleanup queue info while memif connectingChun Li2-1/+5
Change-Id: I4265fd0606f87f80f43f7f59ced1c3a73de82776 Signed-off-by: Chun Li <chunl2@cisco.com>
2018-02-28tapv2: abort in tap_create_if (VPP-1179)Steven1-0/+1
The following command sequences cause the crash: create tap id 0 rx-ring-size 1024 tx-ring-size 1024 create tap id 1 rx-ring-size 1024 tx-ring-size 1024 set interface state tap0 up set interface state tap1 up delete tap tap0 delete tap tap1 create tap id 0 rx-ring-size 1024 tx-ring-size 1024 0: /home/sluong/vpp2/vpp/build-data/../src/vnet/interface_funcs.h:46 (vnet_get_hw_interface) assertion `! pool_is_free (vnm->interface_main.hw_interfaces, _e)' fails The reason for the crash is because when the tap interface is deleted, the code does not remove the entry from the device queue. But the interface is deleted anyway from vnet_main.interface_main.hw_interfaces. When an interface is created again, it may encounter the deleted entry in the device queue and crash. Notice create and delete a single entry does not cause a crash. Need to create and delete 2 interfaces to create a "hole" in the device queue. Change-Id: I42ce0b7943d73b3eab32a16751a0a3183de62d9f Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 0b8567331c3edf8b6aee51c849b8391a2922d9ab)
2018-02-27NAT: replace format_vnet_sw_interface_name with format_vnet_sw_if_index_name ↵Matus Fabian2-39/+32
(VPP-1149) Change-Id: I860468bdc21c6ee07f63c8854592c46ca631ebc2 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-02-27NAT44: in2out output feature skip translation for already translated packets ↵Matus Fabian2-15/+74
(VPP-1156) Change-Id: I5395245c9e49f741a949ada1f725c34f9379c249 Signed-off-by: Matus Fabian <matfabia@cisco.com> (cherry picked from commit f7ad5cbe819533523169e8a88876b94b9f38789c)
2018-02-27NAT44: fix ICMP error translation for endpoint dependent sessions (VPP-1150)Matus Fabian2-4/+150
Change-Id: Iae15d15b470bdde759d08201de9d6dc5afef0ee9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-02-26NAT44: run NAT nodes after ACL (VPP-1160)Matus Fabian1-15/+15
NAT input features run after acl-plugin-in-ip4-fa NAT output features run after acl-plugin-out-ip4-fa Change-Id: I1e4487a0d6fdb99a90b8db640d9ad0e0eb7347a5 Signed-off-by: Matus Fabian <matfabia@cisco.com> (cherry picked from commit 16f0546cadb1248f9dce99788ecc50cc2668c7e4)
2018-02-25virtio: add missing tx lock when running multithreadedDamjan Marion3-0/+10
Change-Id: I373f429c53c6f66ad38322addcfaccddb7761392 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-24virtio: reset vnet header on txDamjan Marion1-0/+3
Change-Id: Ib04a8787038fb536470a04d99fdc165102edfb5a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-22Fix DHCP client crash with worker threadsMatthew Smith3-38/+54
Crash occurring With a worker thread configured and dhcp client active on an interface. When a DHCP reply packet is received, call to ethernet_get_main() from dhcp_proxy_to_client_input() was causing a crash. Replaced with a call to vnet_get_ethernet_main(). Once that was resolved, calling dhcp_client_acquire_address() from a worker thread also caused a crash. Changed so the main thread will do the address/route configuration. Change-Id: Ib23984787102dea8cf6cfcde86188a751f15c1e1 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-15VPP-1169: reenable dhcp client detect when lease expiresDave Barach1-1/+50
We disable the client detect feature when we bind a DHCP address. Turn it back on again when the lease expires. Otherwise, if the DHCP server replies after an outage, we'll never see the reply. Add dhcp packet tx counters, by packet type Change-Id: Id54b05647d5d7bd8d3ab99e6584ee86d9e4ff7f9 Signed-off-by: Dave Barach <dave@barachs.net> (cherry picked from commit 4941fcc23ab01f5ca918e56489d404b92d8bde90)
2018-02-08Use CSIT release branch rls1801 in vpp stable/1801 branchv18.01.1Jan Gelety1-1/+1
Change-Id: I6b00e7cd172709c1de4c700dbec29875bdc67fdb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-02-08Provide page-aligned length to ftruncate.Igor Mikhailov (imichail)1-1/+1
For some files such as hugepages files, ftruncate() fails with the error "Invalid argument" if the 'length' parameter is not on a page boundary. Change-Id: I42a9cde98707da15e3c5d1653046e2277fc7a424 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com> (cherry picked from commit 7d25415a9384d4c3d786d0c1ae5c0fcff3112acd)
2018-02-06Release 18.01.1 jvpp version update.Dave Wallace1-1/+1
Change-Id: I000d842e969b838ad5fbcd18186ac7e1b39b4c46 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-0518.01.1 Release NotesDave Wallace1-0/+9
Change-Id: I2a6826a388cdd4c6b38f53f0e9bcb8b199714d29 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-05NAT64: Run nat64-expire-worker-walk only when NAT64 is configured (VPP-1162)Matus Fabian2-4/+48
Change-Id: Ic5e8d74bf5ac84cce5661de44778c89541c67636 Signed-off-by: Matus Fabian <matfabia@cisco.com> (cherry picked from commit e71eb5922a293eca36dbd323970741daaca3c5c7)
2018-02-02Improve tunnel interface creation performanceJohn Lo8-90/+86
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit e5453d0fa29f39a7f78a7e22815566a7f4c9e5ef)
2018-01-30lisp-cp: fix handling of ndp without source link addr VPP-1159Florin Coras1-4/+21
Change-Id: Idddb60bbc7fcc701d39212f6422a6b2f6dc75221 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-29vlib: allocating buffers on thread-x and freeing them on thread-y causesSteven4-25/+17
a crash on debug image (VPP-1151) In debug image, there is extra code to validate the buffer when it is freed. It uses the hash table to lookup the buffer index with spinlock to prevent contention. However, there is one spinlock for each worker thread. So allocating the buffer on thread-x and freeing the same buffer on thread-y causes the validation to fail on thread-y. The fix is to have only one spinlock, stored in vlib_global_main. Change-Id: Ic383846cefe84a3e262255afcf82276742f0f62e Signed-off-by: Steven <sluong@cisco.com>
2018-01-25Add link to 18.01 test framework documentation.Dave Wallace1-0/+1
Change-Id: I030602391ea3b612ac9a6780399cc30b427cc3a5 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-01-24Update 18.01 Release NotesDave Wallace1-0/+1
Change-Id: Id2f13c59c6f4e7bc79f6e77d6dab752bf6dfb06a Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-01-2418.01 Release Notesv18.01Dave Wallace1-3/+453
Change-Id: I2493a6135aecb4e2eead20a71dcb9ca16834cd63 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-01-24Script to list patches that changed api files.Dave Wallace1-0/+15
- Add Ole Troan's script from vpp-dev email: https://lists.fd.io/pipermail/vpp-dev/2017-October/007037.html Change-Id: I0cbf5118169dc25f0edd659a5a9f5cde8619f780 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-01-23docs: Clean up TOCDave Wallace4-4/+12
Change-Id: I5415c002a431d84372f56d4a77dc2aabd6ef55f7 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-01-22Update CSIT tests 180110 -> 180122Jan Gelety1-1/+1
- update of CSIT operational branch to be used for VPP-patch test Change-Id: I3c81303dc7959da3593240a6da1309843aff8369 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-01-18Sub-Interface deletion not cleanup hash's properly (VPP-1136)John Lo3-18/+24
On deleting sub-interfaces, functions vnet_delete_sub_interface() and vnet_delete_hw_interface() are not cleaning up sub-interface related hash tables and memory properly. Change-Id: I17c7c4b2078c062c77bfe48889beb677610035ca Signed-off-by: John Lo <loj@cisco.com>
2018-01-17VPP-1122 dpdk/ipsec: fix transport mode pkt lenRadu Nicolau1-3/+7
Change-Id: I6eef2ca258ff5b4aa9b21b98543d814633e295af Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-01-11tapv2: deleting tap interface may leak buffers (VPP-1124)Steven4-11/+34
Buffers may be allocated for indirect descriptors by tx thread and they are freed when tx thread is invoked in the next invocation. This is to allow the recipient (kernel) to have a chance to process them. But if the tap interface is deleted, the tx thread may not yet be called to clean up the indirect descriptors' buffers. In that case, we need to remove them without waiting for the tx thread to be called. Failure to do so may cause buffers leak when the tap interface is deleted. For the RX ring, leakage also exists for vring->buffers when the interface is removed. Change-Id: I3df313a0e60334776b19daf51a9f5bf20dfdc489 Signed-off-by: Steven <sluong@cisco.com>
2018-01-11Use csit rls1801 operational branch in vpp stable/1801Jan Gelety1-1/+1
Change-Id: Ie5824b4efe7930816a4312d7d3f541a86db5a2f0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-01-10VPP-1131: doxygen: Documentation for Debug CLI stops at src/plugin/l2ev18.01-rc2Billy McFall1-3/+3
Change-Id: I3ce014da7b514aa766a90cacddd76cd2247406a8 Signed-off-by: Billy McFall <bmcfall@redhat.com>
2018-01-10makefile set CXXFLAGS so they are propageted to sub-buildsNeale Ranns3-2/+8
Change-Id: I55d9953851062f7106c66701d46bcd9073cf1ee4 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> (cherry picked from commit 5ee623e789261552eb9460be10f34793d40b6575)
2018-01-10VPP-1120 SRv6 bug with SID list containing only one SID and no srhPablo Camarillo1-26/+65
Packets with a SR policy of one SID list create a malformed packet. Outer IPv6 header points to a routing extension header that does not exist since the SID list contains only one SID. Change-Id: I1effee0457453bab95706a8a24fdabfbd843d5b7 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2018-01-09VPP-1113 SR MPLS path.frp_label_stackPablo Camarillo1-17/+16
provide one label stack per fib_table_entry_path_add2 call. otherwise multiple mheap releases take place. Change-Id: I475ca1b801fc85dddda0b540c69ad628a274df7f Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2018-01-09VPP-1119: PPPoE's destination MAC was overwrittenHongjun Ni1-1/+2
Change-Id: I6ae99c00e76058654f2c5e71377e9fd1bd13b47b Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-01-09BIER: missing endian swap for imposition object in API returnNeale Ranns3-3/+8
Change-Id: Iddd754d00ace3d042336e5c2c40431566275051a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> (cherry picked from commit eea537a288721b867d65b736363ab3f71ba6116c)
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns10-207/+31
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 52fae862646e25bac6d1cd11b9fc7ac77299bc25)
2018-01-09BIER: crash in show command when no tables are presentNeale Ranns1-0/+1
Change-Id: Ie291468ea9d05c47cefe39c4ff7fea3e016bacf2 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 0e8cb6c475b616a3296b08d25bcaa1eed3ab0084)
2018-01-08GRE tunnel key should use fib_index instead of fib_id (VPP-1118)John Lo1-12/+1
Follow up fix - vl_api_gre_add_del_tunnel_t_handler should pass outer_fib_id from API message to vnet_gre_add_del_tunnel() and not convert it to fib_index, since vnet_gre_add_del_tunnel() already perform the lookup to get fib_index from fib_id. Change-Id: I24967a97f82ce018ddef596e556bd3eb1706cb63 Signed-off-by: John Lo <loj@cisco.com>
2018-01-08NAT: fixed get_worker_out2in bug (VPP-1116)Matus Fabian2-4/+12
Change-Id: I5e080d69f28661cc0b1846885d5001526b54fbd9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-07VPP-1110 BVI reply ARP that doesn't request BVI loacl IP.zhaoqingling2-1/+19
Change-Id: I66ae618edaa12c2b4e4afe276da689673b02c9cd Signed-off-by: zhaoqingling <zhao.qingling@zte.com.cn> (cherry picked from commit b4c42cdc6bbbf464f3f0034b2b39d4e20fd23a25)
2018-01-06Unify/cleanup usage of hash_set/unset_mem by tunnels (VPP-1117)John Lo5-104/+58
Move the functions hash_set_key_copy() and hash_unset_key_free() which are dupilicated in various tunnel support code modules to hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be used by all. Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit e6bfeab1c352ae73a19361c038e2a06a58c035db)
2018-01-06GRE tunnel key should use fib_index instead of fib_id (VPP-1118)John Lo1-2/+11
The code path in src/vnet/gre/interface.c uses fib_id as a component to generate hash key for GRE tunnel. This should be fib_index as the GRE rx/decap data path will be using fib_index to generate the hash key to lookup the GRE tunnel. Change-Id: Ia7f0892d84f9dac79223a6e016775892b61eb5fb Signed-off-by: John Lo <loj@cisco.com>
2018-01-04VOM: NAT coverity found bugsNeale Ranns2-3/+3
Change-Id: Ic55ad2e0a1435f552ce84ed1a9b1981191bc178b Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 842eb22e5d5a7e11114fe093eeccafb080e9aa8b)