Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I12b08333f3f69aaa882e8801f4f69bca2d7bd558
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4930c3c2a8025ec9ceb17e994137be67d88d455f
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
enum bar_enum {
BAR1 = 0,
BAR2,
BAR3 [backwards_compatible],
BAR4 = 9 [backwards_compatible],
};
This allows adding backwards compatible (as guaranteed by the developer) enums.
The enums marked backwards compatible are not considered in the CRC calculation.
Type: improvement
Change-Id: I6fc0c21b19e1a02cff7f5d279a0f3a32d2f8b630
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I3697cf7fab7abb7c3d2f61ef326c9116bc1eed66
|
|
In one's complement, there are two representations of zero: the all
zero and the all one bit values, often referred to as +0 and -0. See
RFC 1624 section 3 for more details.
This used to be taken care of in ip4_header_checksum(), but it is no
longer the case. The check ip->checksum == ip4_header_checksum (ip) is
no longer correct in the -0 case.
Always use ip4_header_checksum_is_valid() instead (which behaves
correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4).
Type: fix
Fixes: e5f0050c7a5d411f96af6401797529d58825e2af
Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
|
|
Type: improvement
Change-Id: Ie063ee0a0c59a9ad632200ce2b23703bc0d936e6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Adjacencies are only defined for IPv4 and IPv6.
Type: fix
Fixes: 20aec3db441074ee5a861a40d6e02fad2f3dcb37
Change-Id: I19b2b7f6958da49f41c6eabc9f248840769acbbb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Hitting a code not reachable when setting
BIHASH_KVP_AT_BUCKET_LEVEL = 1
Change-Id: I24d539df67ae7650a3b1969f5709a6f7366d786b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I5287f6326726780c09e515eede0992bafb413bb2
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
It is cheaper to include checksum field in calculation and simply
compare result with zero.
Type: improvement
Change-Id: I6f77632c0a4d2f2c632d044d3a5d2fcf2b5bac62
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Translation memory size is internally a uword, but in api it was u32,
resulting in the returned value being 0 all the time.
Fix the "incorrect" API reply to return a u32 capped to 0xffffffff if
the u64 is larger than that, introduce the message with
the correct type, deprecate the message with the incorrect type.
Also, while we are updating the message definition,
add the max translations / max users per worker thread
into the new message.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I92e38a6a2bcb70fc8d1b129bbe416bf7f9e54280
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
There is a number of TERMs with big length, such as
'screen.konsole-256color' (23). These TERMs can not
be processed properly by vpp because maximum telnet
byte stream supported is 24 and we need 6 more service
bytes to send TTYPE.
So I extended maximum depth guard to 32.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I9ca506996a97e9567d06483c5f020d6cc394329c
|
|
Make it shorter and same format when converting to biggor or smaller
types.
Type: refactor
Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Node variant names have changed to skx and icl.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I5be832aa59e4e440df53869077d801c011e3defa
|
|
Building VPP using gcc-10 fails because of the array bounds check
error for function ip4_header_checksum(), with option field in IPv4
header exceeding the ip4_header_t bound. Fix this error by turning
off the array bounds check option for function ip4_header_checksum().
Change-Id: I68cc241ae9e403d35ac2e320549506dc6565a0b6
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: feature
Change-Id: I85aa4ad6b68c1aa0e51938002dc691a4b11c545c
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
allocation, the remainder modulo 8 must be returned to the pool so that the number of kept buffers is a multiple of 8.
Type: fix
Change-Id: Ifd97b03ea220300e7e6fe81a8ff4a25060fea6c1
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: Ie29dec803aa4ee02755190b09573c23f9b5f0ada
|
|
This is the code refactor for vnet/flow infra and the dpdk_plugin flow
implementation. The main works of the refactor are:
1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6
as the base the flow type
2. All the other flows are derived from the base flow types
3. Removed some flow types that are not currently supported by
the hardware, and VPP won't leverage them either:
IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU,
IP6_GTPU_IP4, IP6_GTPU_IP6
4. Re-implemented the vnet/flow cli as well as the dpdk_plugin
implementation
5. refine cli prompt
6. refine display info in command "show flow entry"
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I64a99a4fbc674212944247793fd5c1fb701408cb
|
|
Type: fix
Change-Id: I6c6d66ad8aa158be8d2b9d111de7d46473b9dc02
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Also clib_mem_destroy() to destroy the current mspace.
Handy when an application wants to make a memory allocation arena
disappear.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I020db902fbe2473545506fecbc230c2b048992f8
|
|
Type: feature
Change-Id: Ib5d7b7e4735a5dec6c3ed74068206a86782588ca
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia67662a5b988b3b5351cea21d6d92fb3a86629b5
|
|
Type: feature
- Added multiarch support for Marvell OCTEONTX2
- Corrected Marvell THUNDERX2 spelling
Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
Change-Id: I42d3654aeda89759a2db9d695592ee3227b26c2b
|
|
When we have both format blacklisted devices like:
blacklist 1234:5678
blacklist 1234:56:78.0
unformat with fmt=%x:%x matches for both strings
and the rest 78.0 substring is kept in input
and it can't be parsed for init args
This patch checks first if device format matches PCI address and
just then if it matches Vendor and Product
Type: fix
Change-Id: If111762c0e0a424b052e4f6dc0f67731bf89dc2a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|
|
Some of the tests are time-sensitive, and at present require a non-trivial
modification in order to run at high concurrency.
Without these modifications, they intermittently fail, and require
the test retries.
Rather than setting them to the extended tests and forgetting
about them, put them into a "solo" set, which gets run in a
single-threaded mode after the rest of the tests are done.
Mark a few of the tests that showed errors during TEST_JOBS=48
as forced-solo.
Also, give a better diagnostic if the testcase misses a docstring
needed to represent it in the diagnostic outputs.
Type: fix
Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia4504629cb5e87067a337d16f43e044399b87cac
|
|
Type: improvement
Change-Id: Id864c80ac0c9e6f3514a99e516fed82a998effff
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
threads vcl workers scenario
Type: fix
In multiple threads vcl workers scenario, multiple vcl workes can create
sessions with same index. Because only one vls worker created, key of
session_index_to_vlsh_table is duplicated.
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: I7e1f5bc471adc5378194452aef85e611f5d0df1d
|
|
Type: improvement
Change-Id: If02deabea1fe47bbe82c53182e24a97cff68f8ec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Make sure session is in non-closed state after non-blocking connect to
ensure cleanup is performed, if needed.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic1533b9864828f875c840dfdfeed08bf32d10651
|
|
This patch adds the API for vnet/flow infra.
Currently this API supports the below flow types:
VNET_FLOW_TYPE_IP4_N_TUPLE
VNET_FLOW_TYPE_IP6_N_TUPLE
VNET_FLOW_TYPE_IP4_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP6_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP4_L2TPV3OIP
VNET_FLOW_TYPE_IP4_IPSEC_ESP
VNET_FLOW_TYPE_IP4_IPSEC_AH
VNET_FLOW_TYPE_IP4_GTPU
All the above flows are tested with Intel E810/X710 NIC
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb8ae20cab9bdad6b120dddc3bd4fb1d85634f3f
|
|
Type: fix
In ip6_neighbor_probe(), if the interface is not enabled for ip6,
return NULL and skip trying to build a packet.
If the interface is not enabled, its mcast adjacency will be set to
~0 and a seg fault will ensue.
Change-Id: I825c9f40a0d5b2a77f788ac8dbd618138706383d
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Endian handlers was not registered for reply messages.
Causing endian-neutral handlers to crash.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id14173300ee1ab2601e92d58c70d2fa260814b69
|
|
- check input sw_if_index to make sure it is sane. Coverity actually
complains about it.
- return rv. Some of the APIs handlers were not passing back the rv.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I8378ea948af561ba2bd9b02fb10bf4f9df2a2cd2
|
|
- Display the interface name upon successfully creating the interface.
- Don't go silent when error occurs. Be explicit about it.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie4fdaf323f8b3833ad4a7af3872290141204aba8
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I32a28a944fcee11657c4dd0ba34ad6d73de89263
|
|
To avoid ridiculous pointer gymnastics in golang
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic5a641c18281970e2b9bc3013a54cfc3ae92e372
|
|
Type: fix
pci_types.api lives in vlib/pci which wasn't included
in the generate_json.py script
Change-Id: I15649786282584b7aefb9ace83c5154eb697b50b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: I041bff2e8d589c171661de286fa1503531dff891
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I4cd0b1855eab05344897686dc17b7df44de6c786
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I205f7c146a213d603d9d1e46fcf5195a876608dc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
Change-Id: Ic8db52b41d7e5af3425099f008984e50afb3da74
|
|
Type: refactor
Change-Id: I7342178f9ab9adb99b91a4f984bc22bef2ce8021
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Make sure payload_proto variable is set properly in vnet_ip_mroute_cmd()
function. This avoids using an uninitialized payload_proto value which
could lead to assertion failure when using e.g. the ip mroute add
command.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I8b1d1df02e80150836b7b0448814d8f99747eeed
|
|
Type: fix
Change-Id: I78017b02015116f93b579c7381119f618351c98d
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie70348406a2bfc156302687d2f5f98bc1a50c88f
|
|
'type' is a keyword in golang, so s/type/event_type/ in elog.h and
elsewhere.
Add vec_len_not_inline(...), elog_write_file_not_inline(...) and
elog_read_file_not_inline(...) since the inline forms aren't usable.
More such tweaks may follow.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9a80a6afa635f5cdedee554ee9abe400fafc1cb6
|