Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I26c704ec27b8f5431faef08156778f53ea454269
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When container is deleted which has tap interface attached,
Linux also delete the tap interface leaving the VPP side of
tap. This patch does a clean up job to remove that VPP side
of tap interface.
To produce the behavior:
In VPP:
create tap
On linux:
sudo ip netns add ns1
sudo ip link set dev tap0 netns ns1
sudo ip netns del ns1
Change-Id: Iaed1700073a9dc64e626c1d0c449f466c143f3ae
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I65b1af5fa0cec4f9789f91f720d1396d06fa0206
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I670d7899bcc63a419daf481167dc445a6386cce8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
As DVN has fewer DTLB entries supported for 2M page, default numbers of
RX/TX descriptors are changed to 512 if nums of RX/TX descriptors are not
specified by VPP users.
Change-Id: I076493b802b15d12750a5b49d1554da4d19ad460
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Change-Id: I0657cb44f58942ef281046dd3841bda669b10589
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I26279c19b879e59c68fda31426fe42dae62a858d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4d1d22cb24564896264e77c1810804ea3f54cb37
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I81bd967a580ae3b476dfd731e9933a9898568a91
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie504603c2e42cae3ad592952b2b166919420e5f7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I51f61a399e3eace93011f9431cbd7968e9be627c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Good enough to serve the vpp sphinx and doxygen docs. Knows about
html, css, and javascript files.
Change-Id: Ib18c19f07f35f91ba935ea26ed7be406dacf2205
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Problems Addressed:
- Contention of cursize by producer and consumer.
- Reduce the no of modulo operations.
Changes:
- Synchronization between producer and consumer changed from cursize
to head and tail indexes
Implications: reduces the usable size of fifo by 1.
- Using weaker memory ordering C++11 atomics to access head and tail
based on producer and consumer role.
- Head and tail indexes are unsigned 32 bit integers. Additions and
subtraction on them are implicit 32 bit Modulo operation.
- Adding weaker memory ordering variants of max_enq, max_deq, is_empty
and is_full Using them appropriately in all places.
Perfomance improvement (iperf3 via Hoststack):
iperf3 Server: Marvell ThunderX2(AArch64) - iperf3 Client: Skylake(x86)
~6%(256 rxd/txd) - ~11%(2048 rxd/txd)
Change-Id: I1d484e000e437430fdd5a819657d1c6b62443018
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
|
|
To connect a stream, apps should call connect while passing the id of the QUIC
connection in the new transport_opts field in session_endpoint_cfg_t.
Apps are notified of new streams with their accept callback, which is called
each time a peer opens a stream.
Change-Id: I0f82ec344db58008d54641553eddec2973768435
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
This enables applications to create sessions in their RX callbacks, which can
invalidate the session pointer. This is required for the QUIC protocol
implementation.
Change-Id: I6072c1c368fd9d17a960ec086a788089dd6f54b4
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Change-Id: Ic62dfa0bf3e082a0b999026830c64a9c543da586
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I48cd8052f9509efdf13f64ab279edb66a2d4a0a9
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: I832e780b00955e01871874544f3d0afc553b75f7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Algorithm from CLRS, Introduction to Algorithms 3rd Edition, Ch. 13
Change-Id: I5bc2c507593770939cd5584f21dacf36ebd2b4c1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idfcf1644952d647c6e1b61216d9b365d58b77814
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: I4f72989885ecfc6a0b27553194c6611fd71f7e5b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
pcap rx trace on max 100 intfc tap0
then
pcap rx trace status
Displays "local0" instead of "tap0" due to a typo in
pcap_trace_command_internal(...).
Change-Id: Id2de6a24174aac24d9051b7404f01edc806a6573
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Especially on a single core setup the RX thread could signal the main thread
that it was done, before main thread listened to the signal.
Change-Id: Ib70337b21bcf77787ce4ee0aa9cf80c6da2215af
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I54d6fb1a2721b548620eb66cea254d0103deca32
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Crash will happen when someone will try to setup a tap interface
in host namespace without providing the host side of tap interface
custom name. This patch fixes the problem by using the default name
in this case.
Change-Id: Ic1eaea5abd01bc6c766d0e0fcacae29ab7a7ec45
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Id9dfd912517c44cf812953bd05ac04c9e172a2b7
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ib80e9bfb19a79e1adc79aef90371a15954daa993
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I749c5a9d58128fd6d0fb8284e56b8f89cf91c609
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
decrypting too many bytes.
Change-Id: I4663e70271d9734eda7f9a127967b9224c0e5efc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Parsing ipv4 upper layer is not meaningful
if it's a fragment packet except the first.
Change-Id: I442fb7ec01244fde8c4f7656a8ba633d0aa0f97e
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
|
|
Change-Id: I7d84bab7768421ed37813702c0413e52167f41ab
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Iefe9d20799a6f5f271aa5b675ea2b19ac3efbe1e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2f7f3898b913c9b1a37b1c8c84a8df3799c49c5d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ib346570daa3e40f4f53100a05e9355ce60d533a4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic75af8bbd52c8a08e34ff2a847f60be5479b814b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ia86387ca5a52d6b4b9e5aff0c01c92df13a5dde5
Signed-off-by: Parixit Gokhale <pgokhale@cisco.com>
|
|
Change-Id: Ie42b26e6d5cdb7b23f370ea2933c65079e8d1089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ibb3e2f3ba5f31482fc2f0dce53d68f8476608f4b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
hard code IV and key lengths based on cipher.
Init IV from random data, use AES instruction to rotate.
Change-Id: I13a6507d12267b823c528660a903787baeba47a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
when mspace_get_aligned try to malloc a chunk with align greater than 16
Change-Id: Ic3b91fc9532248482662f019bbfa073da18645ed
Signed-off-by: Wei CHEN <weichen@astri.org>
|
|
Change-Id: Ie71235e5a0ff84222d8a35f5d4e99e9b20447d61
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I49c710c5ace24a4c1f083120fd4c2972566a1695
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This change adds a consistent interface for adding test-specific show commands to
log.txt.
It also adds log markers for the execution of setUp[Class], tearDown[Class]
in the logs.
Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Add binary api and debug cli support.
Rewrite for speed: enqueue vlib_buffer_t's to the wheel, instead of
memcpy'ing data. Quad-loop the output feature / x-connect (interior)
node. Prefetch wheel entries in the input node.
Save packet-generator-based unit-test setup in extras/nsim.
Simple config example:
set nsim delay 20 ms bandwidth 1 gbit packet-size 1024
nsim output-feature enable-disable GigabitEthernet3/0/0
Change-Id: I852a32d4eb596e7e2aa1d9b30bf3b53525e39fd1
Signed-off-by: Dave Barach <dave@barachs.net>c
|
|
Change-Id: I74a61e941176321da0767affff0fb023f4c54c35
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Add 19.08 Release notes placeholder.
Change-Id: Ide5978b584e608298c37a15175360c4b16c46f30
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I81b3888816b064bd6bf0f38f5380dae93d7bb349
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I23b4816e4ef2c6a2fa825fbd063ea25ff2024151
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|