aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-10-16PAPI: Add timeout support for socket transportOle Troan1-3/+6
Change-Id: I0402989e0ac738cab2f918e6e3d73c571457c08e Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns15-149/+237
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16Fix coverity issue for potentially overflowing of page sizeHaiyang Tan6-10/+11
Change-Id: I2779626d745badb63386efcf729da7a094a4f297 Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-16Ping; report failures to the terminalNeale Ranns2-14/+39
Change-Id: Icd48de31302f62c59961c573699a1dd0474b8acb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-16vcl: fix bidirectional tests (VPP-1455)Florin Coras4-37/+41
- add epoll dequeued events beyond maxevents to unhandled - filter multiple epoll rx events Change-Id: I618f5f02b19581473de891b3b59bb6a0faad10b5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-16IGMP: proxy deviceJakub Grajciar17-12/+848
Create 'proxy device' per VRF and add one upstream and one or many downstream interfaces. Change-Id: I1cef05fb01e73a5b483c7a2f4debaaeffe2c8155 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-16vmxnet3: show vmxnet3 with filtering capability [VPP-1452]Steven3-12/+234
show vmxnet3 desc may display 5000 lines of output since it has 5 tables. Each table may have 1000 entries. It would not be very useful to debug problem. We need filtering capability for the subject show command. We need to be able to display the descriptor table per interface, per interface per table, and per interface per table per slot. The latter is the most useful. tested the following valid combinations show vmxnet3 show vmxnet3 desc show vmxnet3 vmxnet3-0/13/0/0 show vmxnet3 vmxnet3-0/13/0/0 desc show vmxnet3 vmxnet3-0/13/0/0 rx-comp show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 tx-comp show vmxnet3 vmxnet3-0/13/0/0 tx-comp 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-0 1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 show vmxnet3 vmxnet3-0/13/0/0 rx-desc-1 1 show vmxnet3 vmxnet3-0/13/0/0 tx-desc show vmxnet3 vmxnet3-0/13/0/0 tx-desc 1 negative tests and command is rejected show vmxnet3 abc show vmxnet3 desc abc show vmxnet3 vmxnet3-0/13/0/0 abc show vmxnet3 vmxnet3-0/13/0/0 desc abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp abc show vmxnet3 vmxnet3-0/13/0/0 rx-comp 1 abc Change-Id: I0ff233413496e58236f8fb4a94e493494c20c5cb Signed-off-by: Steven <sluong@cisco.com>
2018-10-16vmxnet3: vmxnet3_test_plugin.so: undefined symbol: format_vlib_pci_addr ↵Steven1-1/+9
[VPP-1456] When using vpp_api_test, there is an undefined symbol error for format_vlib_pci_addr when vmxnet3_test_plugin.so is loaded. The cause is due to vlib not included in vpp_api_test. Remove the reference for vlib.so in vmxnet3_test. Change-Id: I37c00dfe2f843d99ad6c4fc7af6ed10bac4c2df8 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 3d29e83112a349b7d27ef792463f246b18115d3e)
2018-10-16Sticky Load-balanceNeale Ranns6-40/+497
keep the number of buckets in the load-balanced fixed. If a path goes dwon fill its buckets with those from the next available up path. Change-Id: I15603ccb899fa9b77556b898c99136379cf32eae Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-15vnet: create L2 feature arc infrastructureAndrew Yourtchenko7-2/+728
This commit adds two new nodes in the L2 datapath in input and output direction respectively. These nodes fork the traffic into three feature arcs: ip4, ip6 and nonip, which later join to continue the usual L2 processing. The vnet_l2_feature_enable_disable() function with the same signature as vnet_feature_enable_disable() takes care of enabling the L2 datapath feature bits as needed, when the features are enabled/disabled. Thus, L2 features may use the similar plumbing as the L3 features enjoy. Change-Id: I76877b3a92d794c492bff1622bb26acba05705b2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-15dpdk: drop no longer used config optionsStephen Hemminger1-6/+0
DPDK has switched to dynamic logging for initialization (since 18.05). Don't generate config for unused options. Change-Id: I3f1a5b3b8bee38abc9d0654737b59368646ed0fa Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-15dpdk: only look at PCI information on PCI devicesStephen Hemminger5-8/+26
The rte_device is use as a base type of all DPDK devices. It is not valid to use container_of to find PCI information unless the bus of the rte_device is pci. Otherwise, the pointer is looking at some other data, which may or may not be zero. This change introduces a helper function to get rte_pci_device pointer. If device is on PCI bus it returns pointer to rte_pci_device info, otherwise it returns NULL. Change-Id: Ia7446006bb93a7a54844969f3b3dd3b918890dfd Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-15VPP-1448: Fix error when recurse on down the trie.mu.duojiao2-21/+68
Change-Id: Idfed8243643780d3f52dfe6e6ec621c440daa6ae Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2018-10-14vxlan:fix ip6 tunnel deletionEyal Bari1-1/+2
Change-Id: I70fb7394f85b26f7e632d74fc31ef83597efdd16 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-14acl-plugin: make each test in test_acl_plugin runnable separatelyAndrew Yourtchenko1-36/+75
And improve the robustness of the ethertype whitelist test coverage Change-Id: I64fe3a25208dbc619ae5cd6404f6122e69394a38 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-14session: mark apis for deprecationFlorin Coras1-2/+9
Change-Id: I913ffc963928b74cf4753b6b9a0eed4436887e04 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-14vcl: fix empty epoll returns (VPP-1453)Florin Coras1-0/+3
Change-Id: I0b191ddb749b1aa132c2d33b8359c146b36d27af Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-12session: don't wait indefinitely for apps to consume evts (VPP-1454)Florin Coras1-10/+28
Change-Id: I544b24d2b2c4a09829773cf180d1747f4b087d4c Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-12vnet: complete the fix for l3_hdr_offset calculation for single loop ↵Andrew Yourtchenko1-1/+1
fastpass case (VPP-1444) 20e6d36b has moved the calculation of the l3_hdr_offset into the determine_next_node() function, with the assumption that the current_data in the buffer is at the L3 header. This is not the case for the single loop fastpath, where the vlib_buffer_advance() call is made after the call to determine_next_node(), as a day1 behavior. As a result - that path incorrectly sets the l3_hdr_offset. Solution: move the vlib_buffer_advance() call to before determine_next_node() Change-Id: Id5eaa084c43fb6564f8239df4a0b3dc0412b15de Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 376414f4c3f53af44da4e82ee5d0b1843b291f8e)
2018-10-12ip: add container proxy dump API (VPP-1364)Matus Fabian4-0/+121
Change-Id: I3cb89dbfb7174b9913a8c4ad9b3b1dc9f6ed6326 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-12dpdk: support passing log-levelStephen Hemminger1-1/+2
Since DPDK 17.05, DPDK logging supports per subsystem dynamic logging. Allow passing this as log-level on EAL command line. dpdk { log-level pmd.net.virtio.*:debug ... } Change-Id: If9576c11aba390a5cd2740fc1c9da5768689bd74 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-12Add parallel test run info to test/docjuraj.linkes1-1/+27
An overview of parallel test runs, describing the library used, results gathering, stdout and stderr handling and how to execute a parallel run. Change-Id: Ic83cd689751ee46914e3b858b0b24a74b083f99f Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-10-12NAT44: identity NAT fix (VPP-1441)Matus Fabian5-32/+122
Change-Id: Ic4affc54d15d08b9b730f6ec6146ee053b28b4b6 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-11Stats: Include stat_segment.h in packages.Ole Troan1-0/+1
Change-Id: I976c0aba8397badf64763c4dbddce67009a4fb23 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-11Fix vpp-ext-deps package version in stable branchDamjan Marion1-1/+1
Change-Id: Ifb33622b50113501f1d23ab94ba9da708678d6be Signed-off-by: Damjan Marion <damarion@cisco.com> (cherry picked from commit 5551e41f78249b72715203ecd93586f48acccbf4)
2018-10-11bfd:fix handling session creation batchEyal Bari1-27/+34
when multiple session creating script is ran (via exec) only the first one actually starts Change-Id: I0fc36f65795c8921cf180e0b555c446e5a80be45 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-11L2: BM traffic does not use UU-FWD (VPP-1445)Neale Ranns2-2/+22
Change-Id: I5495c37da2fb8ff48c4af14ccba021d64eac52b6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-10vppinfra: introduce clib_mem_vm_ext_free() to avoid fd leaksHaiyang Tan3-1/+13
Change-Id: I8691a10493d159a97574550c111f07722960a7cd Signed-off-by: Haiyang Tan <haiyangtan@tencent.com>
2018-10-10reassembly: get number of workers instead of threads (VPP-1435)Juraj Sloboda2-6/+6
Change-Id: If3abeab2b304e2df41139707a4c8d045fab6ef99 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-10vmxnet3: better error handlingSteven2-20/+42
try harder on output - if there is no descriptor space available, try to free up some and check again. make sure we free the buffer if error is encoutered on input. Change-Id: I41a45213e29de71935afe707889e515037cd081f Signed-off-by: Steven <sluong@cisco.com>
2018-10-10Setup, teardown, DEBUG=core, FAILFAST fixesjuraj.linkes5-249/+380
- Fixed a bug when an error occuring in tearDownClass would not result in test being marked as failed - Improved test results reporting in cases when an error occurs in setUpClass and tearDownClass - Fixed DEBUG=core when the core is produced in setUpClass or tearDownClass - Reworked DEBUG=core to always be handled after all tests have been executed - Fixed FAILFAST=1 for parallel test runs Change-Id: I3e9cd3b97ba6fa802fa0aa2dd7678ff82eee09ec Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2018-10-10Integer underflow and out-of-bounds read (VPP-1442)Neale Ranns2-8/+13
Change-Id: Ife2a83b9d7f733f36e0e786ef79edcd394d7c0f9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-10L2-flood: no clone for 1 replicationNeale Ranns2-59/+102
Change-Id: If178dd38e7920f35588f5d821ff097168b078026 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-10Test FW: Use unittest temp dir as unix runtime dirJakub Grajciar3-29/+34
Change-Id: I5273d5f3f59cc3c43da0a15bb0c4a4056098adcf Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-10acl-plugin: reduce the syslog level for debug messagesAndrew Yourtchenko1-5/+6
Change-Id: Ie8380cb39424548bf64cb19aee59ec20e29d1e39 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-09vppinfra: Fix extendto_high aarch64 NEON api.v19.01-rc0Sirshak Das1-1/+1
This fixes the l2BD and ip4 test case failures. Fixes VPP-1432, VPP-1428, VPP-1430 Change-Id: I48b5c961bab60cc3b39fcd6db47e098c81579480 Signed-off-by: Sirshak Das <sirshak.das@arm.com>
2018-10-09memif: coverity fixJakub Grajciar1-2/+4
Change-Id: I2b14e2a035a37b04816aac1e610146be58ad1e92 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-09API: Spurious timeouts from timeout thread.Ole Troan1-13/+27
Change-Id: I1be1101ba4d82688a32b5ae2c39ca5d92dc244b7 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-09vnet: ethernet-input incorrectly sets l3_hdr_offset in some casesAndrew Yourtchenko1-26/+26
The issue surfaced when developing the tap GSO code, with an iteration where output path is reliant on vnet_buffer (b0)->l3_hdr_offset being set correctly in the input path, during performance testing. Adding a workaround in the TX path shows that the issue surfaces only for relatively few packets during the test (about 100 out of 600000). Analysis shows the issue arises if the ethernet-input is handling two untagged packets with different sw_if_index values - then the accelerated path punts to slow path, before the setting of the l2.l2_len values is done, thus resulting in them being 0, and l3_hdr_offset being the same as l2_hdr_offset, wreaking havoc on TX path. The solution is to move the l2_hdr_offset calculation into a place where it is done for all the packets, and move the l3_hdr_offset calculation into the determine_next_node() function - as that function is also the one setting the special-case l2.l2_len value for tagged packets and moving the current_data for the L2 case. Change-Id: If728c7715e011930c1887691188c98055bddde67 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-08memif: socket filename add/del bugfixJakub Grajciar1-3/+3
Check access rights using effective user/group IDs Change-Id: I3683258c24bcd7817024bffbd56b54b2f596fdd7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-08Adding Multipath support for exclusive DPO based fib path entries via rpathVijayabhaskar Katamreddy2-2/+16
Change-Id: I3c84daf046dbad972b36e48fa2548bbe20c7b338 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-10-08Fix coverity issue for NSH pluginHongjun Ni1-69/+70
Change-Id: Ie99ff9aebe3c896e3e104a5a7bebd84f7766e713 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-10-08Stats: prometheus export coverity errors.Ole Troan1-0/+6
Change-Id: Ibc0a25dcf7d734215e0cffe789b5726f23e1c3d7 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-08NAT44: do not create session record for identity mapping (VPP-1439)Matus Fabian11-103/+236
Change-Id: I39a3146a4e4ba8eadf50af7113b9ae6b1c1d688f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-08replicate trace fixNeale Ranns1-2/+6
Change-Id: I785ecadbf30812a500629870aa717e64f4cf0cdd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-07vcl: cleanup and fixes for vcl test codeFlorin Coras8-979/+958
- better approximate time when test finishes - move common vcl and sock test code to vcl_test.h - overall refactor of variable names Change-Id: I8e6b43fc017cd05a0ddaa3891767a44fb300c09e Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-07vcl: use want_tx_evt for ct sessionsFlorin Coras1-5/+4
Change-Id: Id46c651c41b1c633326081583ee3383e27ef475d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-06bond: active-backup mode is using the wrong load balance algoSteven1-2/+4
active-backup mode is using l2 load balance algo. It should be using active-backup. Also notice that the output is missing a character. vpp# create bond mode active-backup create bond mode active-backup vpp# sh bond sh bond interface name sw_if_index mode load balance active slaves slaves BondEthernet0 6 xor l34 2 2 BondEthernet1 9 xor l34 1 1 BondEthernet2 10 active-backu l2 0 0 vpp# Change-Id: If5ed0cc6c25f6c2ddabec15ff6188b34923d38e3 Signed-off-by: Steven <sluong@cisco.com>
2018-10-05vfio: don't display error if no pci devices are assigned to containerDamjan Marion1-3/+4
Change-Id: I21429ce084cfd39af6a9997b4c1e459f5a6ef672 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-05bond: tx perf improvement, part troisDamjan Marion2-67/+166
Introduce bond_tx_inline which takes lb as a constant for gcc to do the optimization The number appears a tad better for 256 bytes frame. with the patch -------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4836e6, out 1.6967e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 141054 36109824 0 2.51e1 256.00 BondEthernet0-tx active 141054 36109824 0 2.55e1 256.00 TenGigabitEthernet6/0/0-output active 141054 18055469 0 9.43e0 128.00 TenGigabitEthernet6/0/0-tx active 141054 18055469 0 6.97e1 128.00 TenGigabitEthernet6/0/1-output active 141054 18054355 0 9.54e0 127.99 TenGigabitEthernet6/0/1-tx active 141054 18054355 0 7.05e1 127.99 bond-input active 141054 36109824 0 1.76e1 256.00 dpdk-input polling 70527 36109824 0 5.03e1 512.00 ethernet-input active 141054 36109824 0 6.12e1 256.00 ip4-input active 141054 36109824 0 3.26e1 256.00 ip4-lookup active 141054 36109824 0 2.94e1 256.00 ip4-rewrite active 141054 36109824 0 3.27e1 256.00 without the patch ----------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4443e6, out 1.6889e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 142744 36542464 0 2.51e1 256.00 BondEthernet0-tx active 142744 36542464 0 2.67e1 256.00 TenGigabitEthernet6/0/0-output active 142744 18270813 0 9.19e0 127.99 TenGigabitEthernet6/0/0-tx active 142744 18270813 0 6.98e1 127.99 TenGigabitEthernet6/0/1-output active 142744 18271651 0 9.43e0 128.00 TenGigabitEthernet6/0/1-tx active 142744 18271651 0 7.02e1 128.00 bond-input active 142744 36542464 0 1.76e1 256.00 dpdk-input polling 71372 36542464 0 5.08e1 512.00 ethernet-input active 142744 36542464 0 6.15e1 256.00 ip4-input active 142744 36542464 0 3.23e1 256.00 ip4-lookup active 142744 36542464 0 2.96e1 256.00 ip4-rewrite active 142744 36542464 0 3.28e1 256.00 Change-Id: I9fd43eda3c735cbff680ac6d2f01ecdae81f0eda Signed-off-by: Damjan Marion <damarion@cisco.com>