Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I00b0e4d7f7b597760a898c895b1a80bfac3a47fb
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Thanks to gcc-8 for highlighting this...
Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I16395bbf843e338cdd366d85bb4df3de95d9b265
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
crash stack backtrace will be directed to syslog
1. make use of glic backtrace in execinfo.h. the old clib_backtrace is removed
2. install SIGABRT in signal handler, but have to remove it when backtrace is
done. reason is to capture stack trace caused by SIGABRT. vPP ASSERT always
call os_exit then abort(). we definitely want to know the trace of this
situation. It is a little tricky to avoid SIGABRT infinite loop
3. always load symbols by calling clib_elf_main_init () in main(). Otherwise,
PC addresses instead of symbols will be displayed.
Change-Id: I150e15b94a4620b2ea4f08c73dc3e6ad1856de1e
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: Iedebbac71d3e694b915d6a126c80ecc3b5473a4a
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
- instantiate the per-use mask type entry for a given hash ACE
this prepares to adding tuplemerge where the applied ACE may
have a different mask type due to relaxing of the tuples
- store the vector of the colliding rules for linear lookups
rather than traversing the linked list.
- store the lowest rule index for a given mask type inside
the structure. This allows to skip looking up at the later
mask types if we already matched an entry that is in front
of the very first entry in the new candidate mask type,
thus saving a worthless hash table lookup.
- use a vector of mask type indices rather than bitmap,
in the sorted order (by construction) of ascending
lowest rule index - this allows to terminate the lookups
early.
- adapt the debug cli outputs accordingly to show the data
- propagate the is_ip6 into the inner calls
Change-Id: I7a67b271e66785c6eab738b632b432d5886a0a8a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Jira: CSIT-1140
Change-Id: I5c6dd44d3efb298f203e61b14345a2f13680bd34
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
I suppose most API handlers do not use vm parameter so it has not
been a problem so far. Now vl_api_vnet_set_ip6_ethernet_neighbor()
was crashing when called from api trace replay because either of
ip_neighbor_add_del_t_handler() vnet_arp_set_ip4_over_ethernet()
need vm to be correct when it calls vlin_time_now() to update the
neighbor timestamp.
Change-Id: Iffb2084a7c90f92c4b86b339ea11800dd41117eb
Signed-off-by: John Lo <loj@cisco.com>
|
|
- sprinkle statics for functions
- move some inlines from header files to corresponding .c files
- replace some always_inlines with statics where inlining is not
performance critical
Change-Id: I371dbf63431ce7e27e4ebbbdd844a9546a1f1849
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib3a55598a83cc99485b40e38e7c406ecb126fd42
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Check ARP request packet with bad requester MAC/IP address and
drop these packets. Also removed useless VRRP check in the node.
Change-Id: I2c8a774d291928eb623b3a515f1edf7e338fa760
Signed-off-by: John Lo <loj@cisco.com>
|
|
Because it avoids pool putting/getting the timer, this function is
somewhat faster than stopping and restarting a timer.
Change-Id: Id99ed9d356b0b1f7e12facfe8da193e1cd30b3ec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Some crypto devices rely on rte_cryptodev_start() API to be called by
application to enable a pre-configured H/W Crypto device.
- NXP dpaa2 is one of the example.
Change-Id: I2ad8ca0060604fb4e0541161e91bdebc6642f4da
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
|
|
Change-Id: I6a3cfcb24f5027ec0f2cd2ec21ea47a01fef331b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Only remaining traces of MAP in the src/vnet is now in buffer.h.
Awaiting a new buffer opaque API (hint, hint).
Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I6a326e24ed953b1cef63bd4010a3bedd6c4a7b1c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This change adds handling of special case when setUpClass throws. In
this case TestResults receives a mock object called _ErrorHolder.
By parsing its description, we find test class name and use it to lookup
the test class in test suite to be able to add it to the list of failures
for re-running.
Change-Id: I656f21e38aa450fc567cdcbcf6e586967f947a64
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I9d5b5d925fd2c09a1113fc51e433a16d729a241b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit c8efa29b6f9a91381897b54f1147daf922ed7164.
Change-Id: I1d5c5773d5f86a63073e255336bd9de628e26179
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91.
Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Switch to combined allow/drop counters
Show matching ip4 neighbor address if known
Add static-allow mactime entries for unknown mac addresses
Add the "clear mactime" command
Change-Id: Ib963981438dfb8a123df1b3c023bd5fcc27f888f
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
This reverts commit a98346f664aae148d26a8e158008b773d73db96f.
Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit d5c60b96a3fd93916fc4af5c8d6d25625c28242e.
Change-Id: I3632b9c3f76c615aee897f28f76d094e7031e689
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I2e092774f81503e04b53cc6c6b5d357fe3fc52ab
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I2a1b946a71419e1fb3c5d70567c54a6a7d841f10
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
It would seem that this avoids using the stack for computing the
subsequent crc32 by storing the 2 x u64 ip4 5-tuple key into two
registers. Probably the cast to the "convenience" data structure "masks"
the fact that the key is 16B. Probably ... :-)
"sh run" on an ip4 tcp sender reports that the number of clocks spent in
tcp_input, where a session lookup is performed, drops ~25% (from ~100
clocks/packet to ~75 clocks/packet)
Change-Id: I50d647115ac72f8407bff7e3b73328ba42f0ddb5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Minor cleanup that includes unifying
common Java to C and C to Java translation code.
Change-Id: I14d63dbe06334c3bbfbde75043de04d2c08f3dfd
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
As well as a rewrite of the encoders/decoders to make it more readable and extensible.
(Re-commit after fix to verify build.)
Change-Id: Ic244d3cebe070bb2570491f8a24f4a1e203f889a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
The documentation in the API file says that 0xffff == 'no interface
ID specified' but the code tests against ~(u32)0.
Change-Id: I5cd83d876c3ad4f53a5b01463299d4fcb806ea98
Signed-off-by: Ian Wells <iawells@cisco.com>
|
|
Change-Id: Id910db0e3a07ecc6f469e2f0d1e97f39ba48cc60
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I7c611d3fa7fabe82294fc22a61d5a3927a2da39d
Signed-off-by: Jessica Tallon <tsyesika@igalia.com>
|
|
Workaround for lack of driver interrupt support. Also quite handy for
home gateway, laptop/vagrant, other use-cases not requiring maximum
vectors/second for proper operation.
Change-Id: Ifc4b98112450664beef67b89ab8a6940a3bf24b5
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I23caebf602e3e6ff45fdec106a0da88f6de7a284
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Calculate IP/TCP/UDP checksums in software before adding authentication.
Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: If7bcc6ae3358b5e39bf76481ee58f4dbaa53d895
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I4a7e4f616ed4a4df82be3112ac4702f7e4e2025c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I682a47d6cf9975aca6136188d28ee93eaadf4fe3
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
skip the type instead.
Change-Id: I533c8e13c1b2d05c1ddc6dc36427bac010d7c19a
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I2f638f1932b4aeddf2408c06d1b8393551675b72
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I024c1d398fcb51e5a20f9049d16a87b3b1ba0c20
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
the file is used by PyDev - a Python IDE for Eclipse.
Change-Id: Id47287451fc8773332c65afa40c6f0464067cf81
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Trying to accomodate fragments as first class citizens
has shown to be more trouble than it's worth. So
fallback to linear ACL search in case it is a fragment
packet. Delete the corresponding code from the hash
matching.
Change-Id: Ic9ecc7c800d575615addb33dcaa89621462e9c7b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I73b5a4adcfce0d7cd1dd4cf6d9d6a5fb25256bcf
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I28d3c31bdc4255a4ca223d80bcf44709fb39f4ed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I761aced55b7cef51a9b47048283b2cb9430bcde2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
in more than one C file
Including the exports.h from multiple .c files belonging to a single plugin results in an error.
Rework the approach to require the table of function pointers to be filled in by
the initialization function.
Since the inline functions are compiled in the "caller" context,
there is no knowledge about the acl_main structure used by the ACL
plugin. To help with that, the signature of inline functions is slightly
different, taking the p_acl_main pointer as the first parameter.
That pointer is filled into the .p_acl_main field of the method
table during the initialization - since the calling of non-inline variants
would have required filling the method table, this should give
minimal headaches during the use and switch between the two methods.
Change-Id: Icb70695efa23579c46c716944838766cebc8573e
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
If the sw-if-index is set to -1, it will send out all interfaces' arp enties. In this case, the sw-if-index is always set to -1. It is not correct.
Change-Id: I21e9ee078c757ac7efa70a2a1f1a7a4eb73d66a1
Signed-off-by: Brant Lin <brant.lin@ericsson.com>
|
|
VPP-1302: VCL does not provide local and peer addresses
Change-Id: I7ff12e57799796dfeb030b181b4c24da07dc12eb
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I062d7653e00d77e73a61d8841e01ab4a159b6404
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: Idf17a0633a1618b12c22b1119e40c2e9d3192df9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|