Age | Commit message (Collapse) | Author | Files | Lines |
|
this follows commit 01d86c7f6f05938c7d3fe181bd0aa2f75ccdd1df
which removed many unused functions from smp.h
Change-Id: I3aa0954a5e2319cc526fa68dda113f3cbe063960
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
This reverts commit 84517cfd1508f6da24937f310f7fffe752f22584.
Change-Id: Ic7eeffa2ed4607d3d653f34b93c20c833c789ee1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Changes made in ethernet_input to set l2_hdr_offset,l3_hdr_offset, and
their corresponding flags.
Please note that ethernet_input, as a critical DP, incurs a few extra cpu
cycles due to this patch, but for a worthy cause.
Change-Id: Ie9ae352ea62959d2779ebcca98a1898e3d9e1d6f
Signed-off-by: Steven <sluong@cisco.com>
|
|
[ebari] no need to switch if next2, next3 are equal to next_index
[dbarach] change fix_speculation calculaton to a branch-free xor/or tree
Change-Id: I0131dc4499218363d5b0ce8f6440ce74e0b22bb9
Signed-off-by: Eyal Bari <ebari@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
virtio backend stays in vnet/devices/virtio
Change-Id: Idbf04f1c645a809ed408670ba330662859fe9309
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
As tapcli code is going to be deprecated and replaced with tap v2 code,
change the interface naming so the new code can use form tap-X.
Change-Id: I2684a880c037caee677927214752c00cf97f63f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I31d2cbb02a0f59603ef1adc0d185e3d775dfda2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
dpdk_rx_next_from_packet_start is equivalent to dpdk_rx_next_from_etype and seems to have no side effects
Change-Id: I629dadfbfb35ad1f5c7198e7824883ae4bd6abaa
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ic43c70bfe3e93cb3e6cfab7cda1986e44e371c06
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
* Remove unused variable OS_VERSION_ID
* Do all RPM building in build-root/rpmbuild
* Add build-root/rpmbuild to .gitignore
* Move redundant code to a target called 'spec'
* Copy spec file to SPECS instead of SOURCES
* Only set %{_topdir} macro when it's undefined, and because of that
remove sed call to delete definition on spec file
* Pass _version and _release using --define parameter instead of using
sed to add them to .spec
* Move rpm files to build-root after build finishes
* Add dist tarball to .gitignore
Change-Id: I230d60b62914056b353f7f8701d14754b0bf7f8c
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
|
|
fd is not close when IOCTL encounters an error which causes resource
leak. The fix is to initialize fd to -1. At return, close fd if
it has a valid value.
Change-Id: I53c4f5c71ca0f556fb6586f5849e7cb622632d8f
Signed-off-by: Steven <sluong@cisco.com>
|
|
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: I9a154daa661fc5f2f1e7c2eeb77a4bb08d4e34be
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I877cf1abb062a90f428c3ec0cab5c6e9dad0ca82
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0545018ec02f3706ad6a2da6fc13537db5c31a2d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I03d7508649e80a538fcf9541815e2c29224bc87a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
- add support for assigning tap interface to the bridge
- add support for assigning tap interface host side ip4 and ip6 address
- host namespace can be specified as PID (pid:12345) or full path to file
- automatically bring linux interface up
Change-Id: I1cf7c3cad9a740e430cc1b9c2bb0aad0ba4cc8d8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Return error if not input provided.
Change-Id: I4a68fafaf4efd74395e513baa7f18fa55b83de87
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib644a1840c5f24203b6968561f467fbe5e255055
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0946c0a124f3fc9a0aa87499a35edfeaabaec932
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
vnet_buffer->l3_hdr_offset should be displayed as l3-hdr-offset,
not l2-hdr-offset.
Change-Id: Ib8ec9d17a1b4167a2204002023ba2260e8ba36c4
Signed-off-by: Steven <sluong@cisco.com>
|
|
Fix 3 coverity warnings
1. api_format.c: init net_ns = 0 and remove its corresponding vec_add and
vec_free
2. netlink.c (reported in tap.c before the code was removed): resource leaked
due to fd is not close
3. tap.c: subtract 1 for size when calling strncpy to accommodate the
terminated NULL character
Change-Id: Iff4e66604862f0c06dac227b8cfd48d3979e41a5
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I14c838ee99f9bc2db66bb2e775039d2cb2e7924f
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
dot1q/dot1ad classifier mask
17797[1-3] have been a false positive in the optional debug CLI argument handling,
178891 was triggered by an unnecessary use of memcpy.
Also fix the issue reported by khers (thanks!) - since 178891 was in the same place.
Change-Id: I3a804e2b1d25d74c11fcc389020d2c1fd69902b2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ib091875f77ea99421aec0947fd17833c4e6d2ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I84fafa369c6f16295e1c24d9712de2229bf78a91
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Identity mapping translate an IP address to itself.
Change-Id: Icc0ca5102d32547a4b0c75720b5f5bf41ed69c71
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ided667356d5c6fb9648eb34685aabd6b16a598b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
before:
DBGvpp# ip route add 1.1.1.1/32 via mpls-tunnel0
ip route add 1.1.1.1/32 via mpls-tunnel0
ip route: parse error `via mpls-tunnel0'
DBGvpp# ip route add 1.1.1.1/32 via via mpls-tunnel0
ip route add 1.1.1.1/32 via via mpls-tunnel0
after:
DBGvpp# ip route add 1.1.1.1/32 via via mpls-tunnel1
ip route add 1.1.1.1/32 via via mpls-tunnel1
Change-Id: I2185a82fcf0799d59de9cb16e09b7f297faffab9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iae2f9f9652cecdf7e754700b2fe107ad61ff8ff9
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
This patch addresses two things:
1) It simplifies the Makefile to build RPMs by removing duplication and
use environment variables instead;
2) It aligns openSUSE with others with regards to invoke "pkg-rpm" by
the build.sh for Vagrant
Change-Id: I51557f54e4ddf49d83bb69fa0035c8fff122857e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I2fde74b53d6b4dc54d4af7020130f7b22463d70f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ibe3e6cea0ea2fc700ef0a284c8ea5fe5d5476514
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I760b482b9de457bbb17de817db7079b57d3f5ec1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I51d82f39d450834f0ba4d9415aa3e62eb61fc1e9
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: If988b8ad33465819d0e5ab9ef92ffd69b3c7851c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Icab8f1411da22bd56ef0de3b100eaa9519a42f52
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I67a73e31bda9e497859297fcc1765e880572884a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3d936d456ee27b2e0857843295efb60a9f2d0be7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
DPDK tarball was changed by mistake and now it is reverted back.
This reverts commit 3d786efcb087533320e89f80077127fc507cfd99.
Change-Id: I1a07b96fbc3f4fe13bb4a5c401036cae4ac5d346
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
DBGvpp# sh fib mem
FIB memory
Tables:
SAFI Number Bytes
IPv4 unicast 2 673066
IPv6 unicast 2 1054608
MPLS 1 4194312
IPv4 multicast 2 2322
IPv6 multicast 2 ???
Nodes:
Name Size in-use /allocated totals
Entry 96 20 / 20 1920/1920
Entry Source 32 0 / 0 0/0
Entry Path-Extensions 60 0 / 0 0/0
multicast-Entry 192 12 / 12 2304/2304
Path-list 40 28 / 28 1120/1120
uRPF-list 16 20 / 20 320/320
Path 72 28 / 28 2016/2016
Node-list elements 20 28 / 28 560/560
Node-list heads 8 30 / 30 240/240
Change-Id: I8c8f6f1c87502a40265bf4f302d0daef111a4a4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I876f215b129e5e59d3acc6447ce40458cc341eba
Signed-off-by: “mukeshyadav1984” <mukyadav@cisco.com>
|
|
Change-Id: Ic26edd34a2980fc8cf34514433a7b7076660316e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
To facilitate in-tree plugin API testing, via the "binary-api..."
debug CLI command.
Change-Id: If7ee88a6a0dbc8e8f4555cb41e259db24e378a64
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
The dpdk package posted on static.dpdk.org for 17.08
was updated 11/27. This updates the checksum thats
statically included in makefile. Looks like they
also changed the dir structure to add -stable.
fast.dpdk.org has issues with its mirrors being in
sync...changing to static.dpdk.org for now
Change-Id: Id81e328b07873700ae3f76e1ca819f94f26f38c8
Signed-off-by: Ed Kern <ejk@cisco.com>
|
|
logging: allow a client to register a callback handler to recieve log messages
that way the client can maintain a correctly sequenced log
populate: fix the creation of interface and the setting of the handle
stats: the reset promise idea is not defined behaviour.
Use an eanble/disable command pair
Change-Id: I347720bb65df2874c7619e722d593bc863ee2bf1
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I1f292e6035e1ff9e7bdca8f0a9275ebd3d4d8d0a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Signed-off-by: khemendra kumar <khemendra.kumar13@gmail.com>
Change-Id: I0d94ef604d34da6981e7c2d2b4da5ec3ec5fb19a
|
|
Change-Id: Ida719f3997cb14ad869e97f6d8de301a0d19c370
Signed-off-by: Krishanpal singh <krish.singh03@gmail.com>
|
|
Shut off (especially) worker-thread session queue input nodes.
Otherwise, vpp can crash when the main thread unmaps the API segment.
Change-Id: Idf855e7570e0066cc921ae34bc53afabaa9e1dba
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- add debugging scaffolding for simulating buffer shortage
Change-Id: Ice519d74f9c4e4094c4586c548185135b7bb5f2d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|