Age | Commit message (Collapse) | Author | Files | Lines |
|
1. When interface create encouners an error (see test below),
the same id cannot be used again.
This is due to hash_set is called too early in the function. After the
hash entry is set, there are different errors may cause the interface
create to be aborted. But we didn't remove the hash entry when error is
encountered. The fix is to move the hash_set call near the end which has
no more "goto error"
DBGvpp# create tap id 1 rx-ring-size 1021 tx-ring-size 1021
create tap id 1 rx-ring-size 1021 tx-ring-size 1021
create tap: ring size must be power of 2
DBGvpp# create tap id 1 rx-ring-size 1024 tx-ring-size 1024
create tap id 1 rx-ring-size 1024 tx-ring-size 1024
create tap: interface already exists
DBGvpp#
2. multiple issues exist with api_format.c with the below command
binary-api tap_create_v2 id 4 hw-addr 90:e2:ba:76:cf:2f rx-ring-size 1024 tx-ring-size 1024
- hw_addr is not taken due to the test for random mac is inverted
- id is an integer, not a string
- integer values were not converted to network format
Change-Id: I5a669d702a80ad158517df46f0ab089e4d0d692e
Signed-off-by: Steven <sluong@cisco.com>
|
|
forwarding mode:
session initiaded from service host - translate
session initiaded from remote host - do not translate
Change-Id: I48170ee8e4ad14d3d3083ee31a40ef8d10d6ff32
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ic151be9ff7114c1fdec22d5ad056654960cf12b2
Signed-off-by: John DeNisco <jdenisco@cisco.com>
|
|
This patch adds an API to delete a sub-connection following a SRC/DST IP
mapping as required by the RFC4960.
Change-Id: I7673dd07352557442ffeed6c6c00da274b24953d
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I94f6c35bf751d25ca7fe7c67054e676a3ad2241b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
For ERSPAN encap, both bits in the EN field of the header should
be set to indicate any VLAN tag in the original Ethernet frame is
preserved.
Added SPAN L2 test case where the mirrored packet output is a GRE
ERSPAN tunnel.
Change-Id: Ie7a40992a9278469c24aa6fa9e122b4505797d10
Signed-off-by: John Lo <loj@cisco.com>
|
|
This patch adds an API to add a sub-connection following a SRC/DST IP
mapping as required by the RFC4960.
At the same time, it changes the way the next available sub-connection
is being calculated: rather than having an index in the parent
connection which is prone to many issues at run-time, the next available
sub-connection is being calculated by looking at the state of the set
sub-connections and if marked as DOWN it means that is an available slot
to be used.
Change-Id: I662be6a247bfbbe8bf9aaf3f485183c07ef862fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I15cf4a9fd2d2518df4bfffc1ba3c556a87ca5afa
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I3425b1533b3d31210166e7b3798685464ad1c489
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Refactor test code into VclTestCase object.
- Add LDP cut thru and thru host stack tests.
Change-Id: I2b16473df108004c79cc86fe1b7a789485b2dc5b
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Only run semodule command on hosts where selinux
is enabled.
Change-Id: I7bcfc758e44bb0f41ec657ad395352ddb92766eb
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
The following command sequences cause the crash:
create tap id 0 rx-ring-size 1024 tx-ring-size 1024
create tap id 1 rx-ring-size 1024 tx-ring-size 1024
set interface state tap0 up
set interface state tap1 up
delete tap tap0
delete tap tap1
create tap id 0 rx-ring-size 1024 tx-ring-size 1024
0: /home/sluong/vpp2/vpp/build-data/../src/vnet/interface_funcs.h:46
(vnet_get_hw_interface) assertion `! pool_is_free (vnm->interface_main.hw_interfaces, _e)' fails
The reason for the crash is because when the tap interface is deleted,
the code does not remove the entry from the device queue. But the interface
is deleted anyway from vnet_main.interface_main.hw_interfaces.
When an interface is created again, it may encounter
the deleted entry in the device queue and crash. Notice create and delete a
single entry does not cause a crash. Need to create and delete 2 interfaces
to create a "hole" in the device queue.
Change-Id: I42ce0b7943d73b3eab32a16751a0a3183de62d9f
Signed-off-by: Steven <sluong@cisco.com>
|
|
ouptut
Change-Id: I6f75b7328fd0aa71d00a701e36c8b4ad06bff3c4
Signed-off-by: Chaoyu Jin <chjin@cisco.com>
|
|
returning an error when VPP was launched as a service (tested on CentOS 7.3). Adding 'net_admin' to SELinux capabilities for VPP solves the issue.
Change-Id: Icd0529b49adb86e7b371283a6f39af03816951c5
Signed-off-by: Victor Nguyen <victong2@cisco.com>
|
|
This patch address the requirement to handle a COOKIE chunk whilst in
SHUTDOWN phase. The COOKIE shouldn't just be dropped but an OPERATION
ERROR chunk shall be sent to the peer to inform about the current
situation.
Change-Id: I1a47652402d49cfee3b0c810304d7902f3a62f40
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
When heavy traffic is running using worker threads, it may crash here
DBGvpp# 0: /home/sluong/vpp3/vpp/build-data/../src/vlib/main.c:1128 (dispatch_pending_node) assertion `f->flags & VLIB_FRAME_PENDING' fails
Thread 1 "vpp_main" received signal SIGABRT, Aborted.
0x00007ffff5d50428 in __GI_raise (sig=sig@entry=6)
at ../sysdeps/unix/sysv/linux/raise.c:54
54 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb)
No crash was observed if only main thread was used.
Change-Id: I96f8b02ec23accc85c0f1ddecfeff6043b5e3c2b
Signed-off-by: Steven <sluong@cisco.com>
|
|
The VAT calls to MEMIF_SOCKET_FILENAME_ADD_DEL erroneously
cleared the message memory after the M() macro call and
thus lost their message id. Don't do that.
While in the neighborhood, prevent a string copy from
referencing data that doesn't belong to the filename string.
Change-Id: Ib4309608ed617ef4f193880ecf4a0b35fda65e51
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
enabled
Fixed a typo in sctp_push_header(). It was inherited from tcp_output.c
Change-Id: I810fcb4c24cfd3d54f15da72a5184cfc4df24592
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I38904dafb4110322ec0138f7a5b3a65c96426b2b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
- Reduce replicated code in test cases
- Configure separate namespace secrets for thru hoststack
test case to validate namespace secret functionality.
- Pass per-instance environment variables to Worker class
init function.
Change-Id: I3cd5d4538f105cbfb09671c4d761541b40714b8f
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Iacbf7593ef9c03000db502e68335ac3ae18995d7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
platform. VPP-1129
Change-Id: I954acb56d901e42976e71534317f38d7c4359bcf
Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
|
|
This patch addresses the requirements depicted in section 5.2.4 of the
RFC 4960. It also takes care of handling the ERROR chunk and obviously
the STALE COOKIE error.
Change-Id: I6b88a9371546b18a52abac22f7c593a5f16be838
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
As per RFC4960 the INIT chunk could be received in unexpected scenarios
and - depending on the state of the internal state-machine - the INIT
chunk requires different treatment.
This patch addresses section 5.2.1 and 5.2.2 of the RFC4960.
Change-Id: Ib23ef490c6a5ca3da6c46a9584b75e7577cb7042
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
vlib_buffer_get_current() should be used for current data offset in ACL.
This is required for output ACL where packets are decoded through a vxlan tunnel rx node.
Change-Id: I6f739f251c3eb0d59ee4ae0da97aa04ddf667468
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Change-Id: Id5c76a529ab9969334207790babcdc420a9c58ad
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
PEP8 has been deprecated and python users are being asked to migrate to
pycodestyle.
Change-Id: I52d5f7b2bf72156216a9966e8322ec58763f24d4
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I4953b8444b49d1ad445c98a199ae8fd1635e24a5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7b2f52b2b2ce13f27bddc8750b8fc564bf6ab73e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I63f7b14cd63eac9e64cace5d941190096ad148dc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I28cfa7f7f5e4938146478c4a5cc5ad18612aadaa
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5ce40f82e42be19f0f4d882ab194e5a25980adc1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The expression to determine whether to delete a session
from the disposal list only evaluates true if some,
but not all, of the sessions in the list were freed.
When all sessions in the list are freed, it evaluates
false and the sessions are left in the list to be freed
again later, which can result in a session pool element
that was reallocated to a different SA being freed,
breaking crypto for the newer SA.
Add an 'else' that handles the case where all sessions
were freed.
Change-Id: I3ae54d5b3bfc3658bf406caa50646924baaae589
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I25cbf947d6aabadbf637387497104cb301762def
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
A bug was found when multiple SCTP connections were being opened to the
same SCTP server. This patch addresses that problem, removing the use of
the 'parent' pointer approach for sub-connection and saving instead
within the sub-connection itself the ID representing its position. That
facilitates pointer-arithmetic to be computed in the
get_connection_from_transport().
Change-Id: Iaa1f4efc501590be1c93e42fd6fe3d6e02f635eb
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ib3361eded05babfc17ead28af7d252e7503ce141
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When using a DPDK cryptodev with IPsec, deleting a
session often results in a SEGV. A bad pointer
is being passed to rte_cryptodev_sym_session_free().
Put the correct value on the crypto disposal list and
add a check to determine whether the call to free the
session is going to result in a crash before doing
it.
Change-Id: I8a6b0a594585ebcfa56b555ede7ef7d67e5e2b33
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
- Add AF_UNIX transaction to sock_test_client/server
echo test to verify mixed epoll ldp implementation.
- Misc cleanup / refactoring of ldp code.
- Fix LDP_DEBUG in test/socket_test.sh
Change-Id: Ib524c824728f109007d8c4d07d74603b6c687902
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Nintin
Change-Id: I88aabd34ef385d620695ac17ec3fe2f4a5177ada
Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
|
|
Fixes a small bookkeeping oversight where the VXLAN instance
numbers were being freed erroneously by their device_instance
number rather than the correct user_instance number.
Change-Id: I08f6b2089c7a14cc8a8cb91f04f850f60ecec43b
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Iaef2fe4b8c6b57d54ef6309423c9a0acba8a2f89
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Ieb6b7a75fa23c8142ae15f42cd3a703253f39e10
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I1e0cea8e7ea6d8a777ca38abb61f4c093f29c722
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
ENA doesn't support scatter-gather. The PMD started
failing rte_eth_dev_rx_queue_config() in DPDK 18.02
if the flag to enable it is set. Turn the flag off in
dpdk_lib_init().
Change-Id: Ifdd9f188c89b46efe82412c75fb935a92436da1c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I2e9d01ccba5288e89b886464436097d3cb7d2d18
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iee1574d1f0f081ccc4a90fd9825a0b5e254aa642
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I362765a67762a59775863af12b712abb47445b3a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Directly allocate and carve cache-line-aligned chunks of virtual
memory. To a first approximation, bihash wasn't using
clib_mem_free(...).
We eliminate mheap object header/trailers, which improves space
efficiency. We also eliminate the 4gb bihash table size limit. An 8_8
bihash w/ 100 million random entries uses 3.8 Gbytes.
Change-Id: Icf925fdf99bce7d6ac407ac4edd30560b8f04808
Signed-off-by: Dave Barach <dave@barachs.net>
|