Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I442496585fc24b7458535ad1a1d8db525c258540
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Signed-off-by: Emmanuel Scaria <emmanuelscaria11@gmail.com>
Change-Id: I41bb6e16735b77efa744b0368eed7dfa9583e960
|
|
Add simple counter statistics to VRRP, based on a subset of those
defined in RFC8347.
Add an update API that allows in-place modification of an existing
instance. The method returns a vrrp_index which can be used both for
retrieving statistics and to modify non-key parameters. Also add a
delete method which will take that vrrp_index as parameter.
Type: improvement
Signed-off-by: Emanuele Di Pascale <lele84@gmail.com>
Change-Id: I2cd11467b4dbd9dfdb5aa748783144b4883dba57
|
|
Type: fix
VLAN programming is currently enabled for IXGBE. However, that is only
supported for IXGBE_VF.
With this fix, disable VLAN programming for IXGBE.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I37b1d0733988c964d2b0f5a49328effacec1cb6f
|
|
Type: fix
This patch fixes the following DPDK plugin issue:
CID 253333: Control flow issues (DEADCODE)
The change also includes some cosmetic changes for error
handling.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I830020bc3ae9a508f3a905f78333fa3ae25ce784
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2c264c31d2470b11b94d68411fa8266387319146
|
|
This patch affects how destination fib is choosen during session
creation. Default behavior of choosing fib based on output
interfaces is kept.
Configuration gives you the ability to change default behavior
to direct or restrict traffic between different FIB tables.
NAT specific VRF routing options:
a) keeping communication in the same VRF
b) option to add multiple destination VRFs
c) option to control the resolution order of destination VRFs
TX FIB resolution is based on looking up RX FIB entry in NATs
VRF table and picking the first FIB that resolves
destination address.
Ticket: VPP-2009
Type: improvement
Change-Id: If500c48d7ce3466533ad9581c0847870788fc4fb
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Set deprecated option on unsupported API calls.
Cleaned up API calls with deprecated option. Removed
in progress option from long term used API calls.
Removed obsolete/unused nodes, functions, variables.
Fixed set frame queue nelts function. Calling API
would incorrectly not fail even though frame queue nelts
can only be set before first call nat44_plugin_enable.
Moved all formatting functions to _format.c file.
Type: refactor
Change-Id: I3ca16e0568f8d7eee3a27c3620ca36164833a7e4
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: satna <satbeervarma9596@gmail.com>
Change-Id: I1b1db60fa1a0e47fce273bc07b01887813fd3c48
|
|
Type: improvement
Change-Id: Ic675ad4edbf27b7230fc2a77f00c90c46d6350c3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Adds api that allows workers to synchronize through main thread.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1e75e2fb5144d397d19b13c4dfc7e937f11c044c
|
|
Type: refactor
Change-Id: Ib2bf9f11209eb310b289b3202b2beeccc3637df0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9794da718805b40cc922e4f3cf316255398029a9
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6ddb172d7b4f0ba06b0117d71853a22702a3466b
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idd1df83bb01951c2455b23c08e3cc1fcd9b91064
|
|
If async engines are disbaled and async is turned on vpp tries to
enqueue frame with nonexisting handler which leads to segfault.
This patch checks for handler and drops the frame in case it doesn't
exist.
Type: fix
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I67211867ee29dc41cc9f0733e8e0b3ea86677f85
|
|
Type: improvement
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: I90e90678ae6586019cc842f9d504d53991cfabe4
|
|
Type: fix
otherwise punt features are applied multiple times to the same packet if enabled multiple times
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If0cbd9065275f68a10fd6d35e4f7a7c7508245e0
|
|
- support of in-place growth of vectors (if there is available space next to
existing alloc)
- drops the need for alloc_aligned_at_offset from memory allocator,
which allows easier swap to different memory allocator and reduces
malloc overhead
- rework of pool and vec macros to inline functions to improve debuggability
- fix alignment - in many cases macros were not using native alignment
of the particular datatype. Explicitly setting alignment with XXX_aligned()
versions of the macro is not needed anymore in > 99% of cases
- fix ASAN usage
- avoid use of vector of voids, this was root cause of several bugs
found in vec_* and pool_* function where sizeof() was used on voids
instead of real vector data type
- introduce minimal alignment which is currently 8 bytes, vectors will
be always aligned at least to that value (underlay allocator actually always
provide 16-byte aligned allocs)
Type: improvement
Change-Id: I20f4b081bb13bbf7bc0ace85cc4e301787f12fdf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When computing the inner packet checksum, the code wrongly
assumes that the IP version of the inner packet is the
same of the outer one. On the contrary, it is perfectly
possible to encapsulate v6 packets into v4 and viceversa,
so we need to check the IP format of the inner header before
calling vnet_calc_checksums_inline.
Ticket: VPP-2020
Type: fix
Signed-off-by: Mauro Sardara <msardara@cisco.com>
Change-Id: Ia4515563c164f6dd5096832c831a48cb0a29b3ad
Signed-off-by: Mauro Sardara <msardara@cisco.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I30cc31c438d357d48576fba84e54809455960eaa
|
|
Type: improvement
Signed-off-by: sarmurug <sarmurug@cisco.com>
Change-Id: Ibbfe827b9c4c603a6fe7cc49970a46bd683194ce
|
|
Align runtime_data to 8 bytes to avoid alignment issues with any
pointers in runtime_data located structures.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I9cb1b73595e654a4b15c45f87b43fa6cfbcb6e51
|
|
Type: fix
Change-Id: I857403b9d93ee4c17f2dd5ac8e6dafd66260a252
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Creating tap interface / sub interface causes allocation of a new
software interface with possible sw interface pool reallocation.
In such case accessing L3 MTU and interface flags by obsolete sw
pointer is UAF.
Instead, keep desired tap interface MTU value before sw intreface
creation and refetch sw pointer right before sw flags inheritance.
Type: fix
Fixes: b89c1ddcb3b4f9138ca3ebefb2115f896ff3e1bd
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I21ea46d146d11060bb9bedc77377ab17ae9e22e8
|
|
Type: fix
Fixes: 1cd0e5dd533f
In vnet_eth_register_interface(), max frame size was being used where
frame overhead was intended.
Change-Id: I6e6de25e2d616caaf35730ab3d15235ec679ebdd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Fixes: 91f17dc
Change-Id: I860b6d5d5e9cf47d84fde0a2c92be43125038694
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Currently, the plugin can monitor link state changes on hardware
interfaces for which a linux-cp pair exists. When the link goes down on
one of the hardware interfaces, the plugin processes IPv4 routes that
resolve through that interface according to the configurations:
del-static-on-link-down and del-dynamic-on-link-down.
The problem is that link state changes are not signaled for
subinterfaces and the code that handles IPv4 routes is not triggered.
When the link on a hardware interface goes down, it implies
that subinterfaces added to that interface also will have the link in
the down state.
With this change, when the link goes down on a hardware interface,
iterate over subinterfaces added to the interface and apply the same
logic of routes processing as for hardware interfaces.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I97337d2e328437c73f2d99a00737768778f197a1
|
|
Type: improvement
lcp_router_table_flush() is used to remove routes from the given route
table if they are resolved through the given interface with specified
FIB source. Currently, if you need to remove routes from a route table
that are resolved through one of the interfaces from a vector, the
function has to be executed for every interface from the vector. Every
execution walks the route table again.
With this change, lcp_router_table_flush() accepts a vector of
interfaces. Thus, the function can walk a single route table once and
delete routes that resolve through one of the interfaces from the
vector.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I6d99384064d279dea24bb4dc1790a1af943be41c
|
|
Fix ordering in CMakeLists.txt
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I8e71e4fbc048a80c4b250c2a66cfd8a522bde5f4
|
|
format() expects a NULL-terminated C-string as format string.
Type: fix
Change-Id: Ib428cf2debbf98850eed512907175f8ae8ba3c04
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
- icmp_responder: responds to ICMPv4 and ARP requests
- loopback: connects two interfaces and sends a
verification packet from master memif to slave memif
where it is looped back
- loopback (reverse path): reverses direction of packet
in loopback application (slave memif to master memif)
Type: refactor
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ie90aaa3367269408efb6c5d538ad5aa827432238
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
* Correct endianness issue
* lip_namespace is a vector not a string
* Provide null termination to avoid unpack() failures in the client
Responses in the python API now look like:
lcp_itf_pair_details(_0=328, context=3, phy_sw_if_index=1,
host_sw_if_index=3, vif_index=19, host_if_name='ice0',
host_if_type=<vl_api_lcp_itf_host_type_t.LCP_API_ITF_HOST_TAP: 0>,
namespace='dataplane')
lcp_itf_pair_details(_0=328, context=3, phy_sw_if_index=2,
host_sw_if_index=4, vif_index=20, host_if_name='ice1',
host_if_type=<vl_api_lcp_itf_host_type_t.LCP_API_ITF_HOST_TAP: 0>,
namespace='dataplane')
lcp_itf_pair_details(_0=328, context=3, phy_sw_if_index=5,
host_sw_if_index=6, vif_index=21, host_if_name='ice0.1234',
host_if_type=<vl_api_lcp_itf_host_type_t.LCP_API_ITF_HOST_TAP: 0>,
namespace='dataplane')
Type: fix
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: If4bf06a8b70977676ec7f5b1413cee6cc9d1714a
|
|
Type: improvement
Change-Id: I5317afa02fa1525a7d8df595b56eb6546ccded57
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I4c7f2f63651df4362ce1e0e36d885fedf55595c6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic81aafd5f378de06e5ea8cdd6a59e07ff1a7afca
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
ply_create() is not thread safe when the ip4_ply_pool expands.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ie11cc8b1ba587d5e9239a60f4e288492da61368e
|
|
Prevent crashing on nonexistent VPP binary path class member when creating
testsuite core message.
Type: fix
Fixes: b23ffd7ef216463c35b75c831e6a27e58971f4ec
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: Ib9b3dc8c69317e6561e5404bbdcbf672e417cbcd
|
|
Format host interface name as vector rather than c-string.
Otherwise non-null-terminated vector overrun triggers ASAN.
Type: fix
Fixes: 1705a6baefe205bb6792b547c7376eee3f328a71
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: Ib204e57ee17c7ed3bfeb568dcdd834d7d7519102
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1c55c054fea6c6886d8287a9b6e264a308f89504
|
|
Do connects in an session layer rpc instead of doing cli process sleeps.
Performance with 4 workers goes from ~120k/180k first run/warmed up to
~135k/240k
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id184913e9898f8db099e29a605f3a9b1fc67be63
|
|
Type: make
Change-Id: Iedf7af3f070cc3875f44adba38523b72f5e5ab43
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I946d91e67c332ecac0b09d50980529b9d4e74f9c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Convenient for type conversion
Type: improvement
Change-Id: I35a770e06e6318fb4249b70021ed6f6c93b07162
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I99d2c69ede39b3ba5604e1811ce12209c47f5caf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: docs
Change-Id: I8e739ccf78b8dadf81cf4a4c32407355b2576942
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: docs
Change-Id: Iaa2f5e2bb92342c1612cb3addbb9bfdc26623d99
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Currently, when the link goes down on an interface, routes that resolve
through that interface and created with Nexthop API are removed by the
kernel. However, IPv4 routes remain in the FIB because the kernel
doesn't send any notifications about that.
And for the plugin working with user-space applications that create
routes in the kernel using Nexthop API there should be a mechanism to
synchronize the FIB and the kernel in this case.
With this change, add two new startup configuration options to the
plugin to be able to control what should happen with static and dynamic
routes managed by the plugin on link down:
- del-static-on-link-down (disabled by default, delete routes created
with the linux-cp static FIB source on link down),
- del-dynamic-on-link-down (disabled by default, delete routes created
with the linux-cp dynamic FIB source on link down).
Then, monitor link state changes on interfaces for which a linux-cp pair
exists. If the link goes down on one of the interfaces, process routes
that resolve through that interface according to the new configurations.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0fbaeeca3f3d1fcd22e8eebb08a0a4a3d0dfe5b8
|
|
Type: make
Change-Id: I1bad5f84797a1bfeb41420f408540604d461f440
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes case when packet to link-local address is received over
gre/mpls or other non-ethernet interface and ip6-ll fib for it
is undefined.
If by a chance ip6-ll fib index is valid, packet will be passed
to some ip6 fib with possibilities to be sent out over unrelated
interface or be looped again into ip6-link-local dpo till oom
and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ie985f0373ea45e2926db7fb0a1ff951eca0e38f6
|