summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-11-16VPP-521: Classify API enhancement to redirect traffic to pre-defined VRFSteve Shin8-48/+240
Ingress packets are punted to the “Input ACL node” where traffic is classified based on n-tuple keys. If no matched session is found from the classify tables, then it will be passed to “the lookup node” for normal packet forwarding. If a classify session is hit from one of classify tables, then packet vnet buffer field sw_if_index[VLIB_TX] will be updated to the new FIB index used for subsequent IP lookup for this packet. Change-Id: Ifdea63196ddb81c2d5c43b8c98e11ddbf5b11858 Signed-off-by: Steve Shin <jonshin@cisco.com>
2016-11-15feature: remove old interface output feature codeDamjan Marion12-195/+44
Only consumer was ipsec which is now moved to the new ip{4,6}-output feature arc. Change-Id: I06008e67b5449c25eae77f28e1688521af3a23e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-15feature: convert ipsec output to new feature codeMatus Fabian5-79/+84
Change-Id: Ia287298bac76c8e6bf760d48c1e1e697de52999c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-11-15threads: add support for multiple worker handoff queuesDamjan Marion6-194/+281
Change-Id: I2452df3c493eeb0a5078d53a230df6906651c057 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-15span: add feature (rx only) (VPP-185)Pavel Kotucek14-0/+950
Change-Id: I0f7cbf06b5a5acd745d13c9f5c761ea18132107b Signed-off-by: marek <mazavods@gmail.com> Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-15VPP-393: Subinterface is still used after deletionPavel Kotucek2-1/+13
Fixed bug in delete of sub-interface, if sub-interface is xconnected it was not deleted correctly (show interface address fails). Interface is set to L3 mode before deletion. Fixed help in API command. Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> Change-Id: Ibe781e4b53422e6535e34ec72dbe274f9045f051
2016-11-15Update test documentation.Matej Klotton28-315/+277
- update IRB, IPv4, ipv6 doc - revert 778c2765c8ea5c6628f6d668847f0b9ae06dbf3d Change-Id: I9af5ed9329ce5fe01392cf28d5bf321cfc647e48 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-11-15Update CSIT tests 161106 -> 161113Jan1-1/+1
- update of CSIT operational branch to be used for VPP-patch test Change-Id: I3a475b34764cfe3e433ce7ab8cfc5501f6131690 Signed-off-by: Jan <jgelety@cisco.com>
2016-11-15DPDK_HQoS: fix coverity warnings on uninitialized variablesJasvinder Singh1-3/+7
Change-Id: I76437b76619a280a44e4def4d6c048eaf3926102 Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
2016-11-15threads: add assert to silence coverity warningDamjan Marion1-0/+1
Change-Id: I381786b26050f2dfcb4c74094309cf2114d26d85 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-15buffer: clone free_list to each vlib_main on creationDamjan Marion2-7/+31
Currently only packet-generator is creating free_lists during runtime. This avoids crash when buffer is freed on different worker thread. Change-Id: If2ae066a12cf7c4b3267d56d8566806f31cf7ffc Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-15Dump routes (VPP-500)Steven11-11/+775
Change-Id: I86e7382395a8b6471a0deaf57163718d41b71b83 Signed-off-by: Steven <sluong@cisco.com>
2016-11-14dpdk: add build support for DPDK 16.11 releaseDamjan Marion1-1/+1
Change-Id: Icec79bfc5d786cd293520b1dcc6b8dccd1419acb Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-14make test: improve naming of temporary pcap filesKlement Sekera1-6/+7
Change-Id: I0f4e83aab8bec80562bd90e8035f602ce903cd3e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-11-14Add support for multi FIB DHCPv6 ProxyWojciech Dec4-160/+286
- Support multiple DHCPv6 server targets across VRFs - Allows clients and servers to be in different VRFs - Aligns CLI and VAT for DHCPv6 to DHCPv4 Change-Id: If47756b3a51dc1b9d045a32b7d32ceb80c1746e2 Signed-off-by: Wojciech Dec <wdec@cisco.com>
2016-11-12Add clang to 'make verify'Damjan Marion2-0/+23
Change-Id: I9ba84632da93ffb7713064db51f2888fc212713a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-12Fix a bug in the timing wheelKlement Sekera1-2/+3
Properly propagate vector allocated in advance_cpu_time_base() for a special case, when the expired_user_data parameter passed to timing_wheel_advance() is NULL and the only expired event is in the overflow pool. Change-Id: I5cefab0e881958334791aaa6354ec08225af23c1 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-11-12Use gcc for start in 'make verify'Damjan Marion1-3/+2
Change-Id: I8ef5f8aeb9af5127337163c4767bfa92b62f8175 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-12pseudo atomic adjacency updatesNeale Ranns10-94/+230
When an adjacency changes from incomplete to complete (arp to rewrite) and vice-versa, that update must produce valid behavour w.r.t. the packets that continue to encounter it. Change-Id: Icc2709aff9807c5d24f91ef7649268991ad9a45d Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-11-12Clean up coverity warnings, VPP-486Dave Barach3-15/+12
Change-Id: I709e7cf0bb52d8e6cdc9ddb3b7648660204aa3bd Signed-off-by: Dave Barach <dave@barachs.net>
2016-11-11Add 'make verify' target to top-level makefileDamjan Marion1-0/+4
Change-Id: I992df2b6ded9533d32f5f936e6d651055061f054 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-11Add single-loop test variant to L2BD and L2XC testsJan6-151/+284
- create single-loop version of tests - update doc strings - add possibility to log CLI string for logging level "info" Change-Id: Ibc9e5650b8a33d2ed168a8440c2ae03227be60bb Signed-off-by: Jan <jgelety@cisco.com>
2016-11-11Luajit API and some examplesAndrew Yourtchenko16-0/+4164
Change-Id: Ia140c4750f06870c40b7058c4afb2e20ca633a49 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2016-11-11Fix clang compile errors in pluginsNeale Ranns1-3/+3
Change-Id: I2c2df9b5ba567bde2564c924bd9ad2fbbac775c4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-11-11feature: convert all feature nodes to new feature infraDamjan Marion40-1613/+481
Change-Id: I34c527ba910fb282a95458b78d1d684eb337905e Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-11Add IRB testMatej Klotton10-119/+483
- JIRA: CSIT-255 - create loopback interfaces - move pg-interface specific arp and neighbor discovery from vpp_interface to vpp_pg_interface - base configuration of IRB tests - IP test scenario Change-Id: I9945a188163652a4e22325877aef008c4d029557 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-11-10ip_frag: fix implicit enum conversionDamjan Marion1-1/+1
Change-Id: I024b8d79cced45cf53a7a912319eca2cc932b10e Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-10feature: fix init issue when multiple arc are presentDamjan Marion2-10/+18
Change-Id: I9c76b6d7ffebeeb92d5eeca5852c487d73151f28 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-10Enable verification received packet for LB testMatej Klotton1-12/+4
Change-Id: I9c8a2f5744f322b2bd91c5ae24aeb1279cd11e0c Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-11-10VXLAN tunnel encap forwarding optimization with FIB 2.0John Lo9-379/+494
Optimize VXLAN encap node so that vxlan4-encap node is used for IP4 and vxlan6-encap node is used for IP6 underlay. Also stack the VXLAN encap nodes to the appropriate FIB IP4 or IP6 load-balance node instead of ip4/ip6-lookup node to save IP lookup operation. For VXLAN decap node, check VXLAN header FLAGS field for each packet and remove the code to support decap-next for IP4 or IP6. These decap- next values were intended for experimentation purposes and not needed any more since VXLAN-GPE tunnel is supported. The decap-next field is still kept in API for backward compatibility and its value has no effect. Decap next for both vxlan4-decap and vxlan6-decap nodes is always l2-input node. Change-Id: I8ac95774946549ec403ab691f999df0c006b460f Signed-off-by: John Lo <loj@cisco.com>
2016-11-09Fix Compile errors from clang in FIB2.0 codeNeale Ranns15-21/+19
Change-Id: Ief769c966888094944b7a6b7f26527e7eff6103f Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-11-09Fix DHCP proxy when used for non-default FIB tablesIgor Mikhailov (imichail)1-3/+3
An issue is that the server->server_fib_index is overwritten by some incorrect value on subsequent calls to the function - e.g. when setting DHCP proxy for the same FIB table several times. Change-Id: I2e129b47f5c8fe3a0b924a7d71bb83e6fc53e9b5 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2016-11-09Fix a batch of coverity warnings, VPP-486Dave Barach6-6/+19
Change-Id: I0379844824b4c2eb42588d0fb8e1a7eb441e923f Signed-off-by: Dave Barach <dave@barachs.net>
2016-11-09Update CSIT tests 161030 -> 161106Jan1-1/+1
- update of CSIT operational branch to be used for VPP-patch test Change-Id: I5e705f4a4d1f843ff0041930399f707e59d01b05 Signed-off-by: Jan <jgelety@cisco.com>
2016-11-09threads: don't wait for dpdk init in vpp_liteDamjan Marion1-1/+3
Change-Id: I110cdc3cc2a26aa36dc250302a6f26db2d884e08 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-09devices: create dummy device-input node to keep nexts in syncDamjan Marion11-29/+31
device-input feature arc requires that all input-nodes have nexts in sync. packet-generator tends to call vlib_node_add_next when new stream is created and that puts nexts out of sync. With this change all input node are siblings of device-input node so call to vlib_node_add_next(...) will install same next to the whole family. Change-Id: I33d79492e5f30f348af19e527f36fe0222c524d7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-09dpdk: bump to 16.11-rc3 releaseDamjan Marion1-1/+1
Tarball available at: http://dpdk.org/browse/dpdk/snapshot/dpdk-16.11-rc3.tar.xz Change-Id: Ib34f32206d866888c4b5bf6609b8ae53f570daaa Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-09fix errors reported by clangDamjan Marion2-1/+2
Change-Id: Ib821e52dac7cd7ee24e6e495916689e23e8b699a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-09Improve test framework documentationKlement Sekera26-199/+386
Change-Id: I06f0cbbbdd29e04a07f1db6807b3e16f1d41e8d2 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-11-09Disable non-working checks in load-balancer test and rename ip->ip4Klement Sekera2-8/+11
Change-Id: If62011e29e912bf0c47625b0d3b3624ef6375013 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-11-09Update sample plugin and plugin skeletons: use driver feature arcDave Barach5-26/+75
Change-Id: Ic0a1479e4a0408a4b93f47e50752d07c2bdccdde Signed-off-by: Dave Barach <dave@barachs.net>
2016-11-08pg: maintain per-worker bitmap of enabled streamsDamjan Marion4-10/+25
Change-Id: I38e476c8080faa5a8647ce6be5a71090e0aa8d5b Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-08Add the tap driver to the driver feature arc schemeDave Barach2-24/+16
Change-Id: I5f5251ed6b2a39d5e83dd7c702079245ef5f32b0 Signed-off-by: Dave Barach <dave@barachs.net>
2016-11-08vhost: Improve packet tracingPierre Pfister2-64/+133
Packet tracing for packets sent or received on vhost interfaces now includes: - virtio header information - virtio queue transmit mode (chained, indirect, etc...) Should be *really* helpful for dealing with the many existing qemu/driver versions/implementations. Change-Id: Id0a5d1d671d8b9d3e05691fe13def991b30ee105 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-11-08pg: support for packet generator on different worker threadsDamjan Marion13-38/+98
New Debug CLI: packet-generator new { worker X } Change-Id: I71499733a29b49cd36d753d54846d2553af6d024 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-07Restore punt/inject after FIB2.0Igor Mikhailov (imichail)1-0/+12
The tuntap punt/inject should be enabled for IPv4/6 RX once any vpp interface has an IP address. Change-Id: I4a507b7540b7464ed6d21035ac9b8f9463028c6f Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2016-11-07Fix a class of spurious clib_memcpy (...) warnings, VPP-486Dave Barach1-0/+8
Coverity doesn't understand the vector-unit memcpy functions. #ifdef them out of the way when running a coverity scan. Change-Id: I312eec1c861c1d3722510d2c121fb5f398fca868 Signed-off-by: Dave Barach <dave@barachs.net>
2016-11-07Fix dual-loop issue in vxlan_gpe decapHongjun Ni1-18/+24
From logical point, if first packet is ipv4, and second packet is ipv6. When first packet failed, the procedure will skip key6_1 setting. This will lead to second packet's failure. But here the graph node only process either ipv4 or ipv6 packets completely. So it is not an issue here. This patch only make the packet processig's logic clear. It is just a cosmetic change. Change-Id: I0104ebf2546208d9068000649ce6dccdeeb5aa79 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-11-07pg: add device-input feature arc support on pg interfacesDamjan Marion2-5/+38
Change-Id: Ice97940a27c9f4d983d9199d59719d953520fcdb Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-11-07use STATIC_ASSERT macro instead of calling _Static_assert directlyDamjan Marion9-22/+26
Change-Id: Iccae655334b6219d22c325108b0e7f37d1dd68cf Signed-off-by: Damjan Marion <damarion@cisco.com>