Age | Commit message (Collapse) | Author | Files | Lines |
|
Adds startup.conf knob:
dpdk {
log-level debug
}
Change-Id: I80dfbc00559528d7b0970958fba9f08d97aa7118
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I982e0dfb96c371672aa636aa7e40f06a84e2bb69
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Prior to commit bfd9227e6da567e0e19e026afe94cd4c0b65f725, there was
no clean way to check the lower-level message length as supplied
by the client, so there was no option but to trust that the client
does the right thing and allocates memory correctly.
The absence of checks makes it hard for a misbehaving client
to spot the problem - because everything "appears" to work
correctly for the specific erroneous message exchange.
This commit ensures the message received is at least
as big as we expect, and complains loudly if it is not.
Change-Id: I806eaac7c7f1ab3c64cb2bfa6939ce27da9a2b44
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
This add debug cli to accept SRv6 localsid that will be
used to attract the return traffic for M-Anycast flows.
Change-Id: I8f8dd115c36498141ae4cb143c6584141950b1d3
Signed-off-by: shwethab <shwetha.bhandari@gmail.com>
(cherry picked from commit 00c14a94c34fac89e6e589c4a7aad20d8dd183dc)
|
|
According to DPDK release notes this is done by DPDK.
Also, it fixes assers in debug image.
Change-Id: Ida1d25f8cd0c2232110e44eabd7dc3e512336758
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Removed the linking which does not appear to be necessary when using in repo
dpdk and which causes a build failure when using the shared-dpdk mode.
Change-Id: I6bad2bd11d6db40fbd2def78f98c6beba66ff416
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I0ffa572839405efe1170d6ddb073e53e9af02db7
Signed-off-by: John Lo <loj@cisco.com>
|
|
(HC2VPP-137 is the client behavior triggering this)
If the user does not unapply the ACLs off the interface,
but deletes the interface, the subsequent reuse of the
sw_if_index might find itself with the datapath
hooked up for ACL processing even though there is
no ACL configured. The fix is to unapply any ACLs
in the callback which is called upon the sw_if_index
addition/deletion.
Change-Id: Icea413d7fbf1ef891844a4818626e1b34fe79cbf
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 4c72e629e5ace392390a9d6109594254525064f7)
|
|
Change-Id: I60a7795761fe74ae5d57dacd03c343ddb77434d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Basic GTP-U feature
Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Migrate memif to use vnet device infra APIs. No new function is added.
Change-Id: I70e440d2ae1e673876365041f31fe78997aceecf
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib390164abb07ca0d38fd49e7e2e6b4e9ea856405
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I87495d95dc6c5a36ff6d2ae05203e22e43403bf6
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
For platforms which do not support u8x32, such as aarch64,
add an alternative implementation of 'dpdk_buffer_init_from_template'.
Change-Id: Ia7e8d0a5985fa5925e063ed6e890208c73e39933
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: I19744387859129c6b8dc104041af158bf5f1d988
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
32-bit code still can use crc32c instructions, but it operates
on 32 registers
Change-Id: I9bb6b0b59635d6ea6a753584676ebcf59c8f6584
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Adds VirtualFucntionEthernet for VFs
- Enables MLX4 driver
Change-Id: I163300e68edbe033227f641bdfcfe5918cbe58cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Move API source code from snat.c to snat_api.c
Change-Id: I1c4439eb5d2e3f43695ecc4d300eccd148105c15
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0fec86914ec027383ff511b7092beac2363f55f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1decca6fb5ce6de74ccbcd5a262ebd3db6f55cdc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix a logic error related to timing out of the connections
following the active one. To avoid this class of issue in
the future, create corresponding testcases, as well as some
trivial sanity testcases for both IPv4 and IPv6.
Since these tests are timing-dependent and take up time,
mark them as extended tests.
Change-Id: I2c72bad5efda7db8aa9cb05801fe47928dc47927
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I961685a2a0e4c314049444c64eb6ccf877c278dd
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: Ib506c3e9d66170f29e3266ad6dc4d32b829befba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I16dcc0de2553c6c1eb87dd1ec4c8d3c649e6f285
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch slightly modifes how to enable DPDK Cryptodev.
The startup option 'enable-cryptodev' has been removed and unless not enough
cryptodevs are found, DPDK cryptodev will be enabled by default.
Change-Id: Ic0ac507802cdc0eeb51f065e04ec43a1885617cf
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: Id632ff1b30be808d9f270e2f77260391569fbda2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I19a6015fde7342588cfa9c7a4f07016aa339cc72
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: Ic95fe6179de1151796188813cc595187d4c842a0
Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
|
|
Change-Id: Ib542b2b3ee023fbe3d0e01ceaf4b4ab7a0ec80dc
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: I9c8636bd2c4b8da2907e8e4a4f2be1a2c3a8e0bb
Signed-off-by: Martin Gálik <magalik@cisco.com>
|
|
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Multicast enable flag should be set when the bonded interface is up.
This flag allows multicast packets to be processed from the slave devices
of the bonded interface. Also promiscuous mode for all-multicast should
be correctly displayed as part of 'show hardware detail' output.
Change-Id: Ief0157c4c030a28afb9c45ebf3d6a12710083724
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
maximum entries per user exceeded event
Change-Id: Ie35d7f40f55001e2ef4a38f934f176594f25b189
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I220b0b95449f24cc547206e38ab8e10019115ec0
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I3d64d5ced38a68f3fa208be00c49d20c4e6d4d0e
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Iec8fd4c2bd26874bd8bda82172af797e9b92592c
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ide4f9bd6158fb64d069540fb43f4e593e39d6ff3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Handle situation when client tries to connect to multiple hosts/ports
from the same client port. Extend matching to include remote host/port
when searching for existing session and create session for each flow
even when originating from the same client port.
Change-Id: I4f54ded930e59e7196843c6bc1d2d2386c57cd3c
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ie2ab844ad27b5ddb552bad9b19e7029cf91e4071
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
add API and CLI configuration of deterministic NAT session timeout for TCP, UDP
and ICMP protocol
Change-Id: I577440452e7eaedcb5d80501a7fd4b76e31e8c9c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I0306bc0ab87908adb79c594c657d579cb34b3ec1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I9a6bcb7d173a2c13d89784e7ff8a6e42dcee201f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This pathch deprecates "show dpdk placement" and
"set dpdk placement" CLI commands.
Change-Id: I4e052ec3e8b8e6c54b4816e1e689e5b7a24892db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I71f34dc64d4ddc5f2ec1164cb3c353d0fe2d95ab
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Icd25ec2e5faf69898178199aa44f21790ce664e1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I691d1bfb2923a07c0003485b1d0272aaf9ed27ee
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|