Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9db1b74097c9df587b9265b14a969d347bcb731a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5b18cb84bec88f5514cacd2df61b5ce3c70abd77
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I8cb03ee832e77d2b21d47aa7a44579c283fb1054
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0aa220b1f5a72d8bbc6d147830766790d7f6d9bf
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie8dcd9fa0d0487b146eaa62113a5ee06bd3e7d3b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
rx: add batching for WC processing and release
tx: improve batching for WC submission and processing
rdma-core: compile in release mode to remove assert()
Change-Id: I5fb8736db36b50f8b758cd688100477b67e72d80
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I438ef1f50d83560ecc608f898cfc61d7f51e1724
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I28bb9e3d3ea3a99a9e24801ef5241a0099186108
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Currently this plugin provies AES CBC optimized code. Encryption code
supports parallel encryption of 4 buffers with different size and key
which improves performance 4x compared to standard serialized aproach.
On Skylake Server measured performance is around 0.71 clocks/byte with
256 buffers with size in range between 7000 and 8000 bytes.
Measured performance includes overhead of processing crypto ops.
Change-Id: I5ec2afee708fcdf16a4234926534dd64ff1155c3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add flags for unknown unicast drop, multicast and broadcast
drop and arp unicast.
Change-Id: I1203137510b8bee0a20ecfe5f2efad8043d4bac6
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
By definition, passive mode means the node does not start sending lacp pdu until
it first hears from the partner or remote.
- Rename ptx machine's BEGIN state to NO_PERIODIC state.
- Put periodic machine in NO_PERIDOIC state when the interface is enabled for
lacp. ptx machine will transition out of NO_PERIODIC state when the local node
hears from the remote or when the local node is configured for active mode.
- Also add send and receive statistics for debugging.
Change-Id: I747953b9595ed31328b2f4f3e7a8d15d01e04d7f
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Tx stats are no longer counted twice.
Submit tx packets as a single batch per vector instead of per-packet
Change-Id: I26820b21f23842b3a67ace0b939095f3550d3856
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
packets should not egress on an iVXLAN tunnel if they
arrived on one.
Change-Id: I9adca30252364b4878f99e254aebc73b70a5d4d6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I77ad9eb4d4c7699397aa4be6a973ef37c60db4c5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
When building with environment variables set to enable mlx PMD
support in DPDK, an error occurs:
CMake Error at plugins/dpdk/CMakeLists.txt:104 (vpp_plugin_find_library):
vpp_plugin_find_library Macro invoked with incorrect arguments for macro
named: vpp_plugin_find_library
Update a call to vpp_plugin_find_library() to include the right
number of parameters.
Change-Id: Ia0d66f93c6f94fdf822e2c3c4fe3f0ad01a90d57
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
nonexistent elements
If we are testing for an index whose membership bitmask happens to sit in LSB of uword,
and there is nothing else set in that uword in the member bitmask, the shortcut path
returning the valid index is taken even if the element with a given index doesn't
exist in the sparse vector. This happens because the count of leading zeroes on the
value of 0 is zero, which is equal to the value taken modulo bitsize uword.
Take care of that case.
Also add unittests showing the problem and verifying that sparse_vec_index2 does not
have the same issue.
Change-Id: I19117e13817c3e5de579b9250bb741de42491985
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Currently supports on single stream exposed through standard internal APIs
Based on libquicly & picotls by h2o
Change-Id: I7bc1ec0e399d1fb02bfd1da91aa7410076d08d14
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Change-Id: Icf83c876d0880d1872b84e0a3d34be654b76149f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic6244511b88bdd42756f74e3163a70b8014e8547
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2018d8367bb010e1ab30d9c7c23d9501fc38a2e5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0b996460e05c40e74766563fb2a94c62a65063ce
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
A punt/exception path that provides:
1) clients that use the infra
2) clients can create punt reasons
3) clients can register to recieve packets that are punted
for a given reason to be sent to the desired node.
4) nodes which punt packets fill in the {reason,protocol} of the
buffere (in the meta-data) and send to the new node "punt-dispatch"
5) punt-dispatch sends packets to the registered nodes or drops
Change-Id: Ia4f144337f1387cbe585b4f375d0842aefffcde5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib73352d6be26d639a7f9d47ca0570a1248bff04a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an
initial, unoptimized driver targeting Mellanox cards.
Next steps should include batching, multiqueue and additional cards.
Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
When adding two or more events using a single "set pmc",
the pmc hardware indices might be out-dated due to kernel
reschdeduling the perf_event hardware counters.
E.g. set pmc cpu-cycles cache-misses
Solution:
Open and enable all the events first, then aquire the
indices from the kernel.
Change-Id: I6913a871ab169e3b2855ac6159f527a1fca343e9
Signed-off-by: Su Wang <su.z.wang@ericsson.com>
|
|
With collision match vector, the doubly-linked list is not needed anymore.
Change-Id: Iaf667ebe6ce0bdd78306bec31d3949e6acb8d401
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Reload the hash-ready ACE vector pointer during the partition split
with each iteration, since the ACL# may change.
Change-Id: I1b001e06b52ff02ef59ca1d890f8462ca99e6634
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Long time ago, the linear array of rules in the ACL structure was not
a vector. Now it is, so get rid of the extraneous "count" member.
Do so in a manner that would ease potential the MP-safe manipulation of
ACL rules in the future.
Change-Id: Ib9c0731e4f21723c9ec4d7f00c3e5ead8e1e97bd
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I540241672a20f687d20bb70adbf2b33200f34167
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I04dbfb914706b25fcc3bd6ee0d19cfdc810234ae
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- avoid changing snd_nxt when doing fast retransmits
- use snd_una_max only to keep track of the max seq number sent
- simplify future ack testing
Change-Id: I3580ad3aefe30128486c3375d0ac3f3f62c04c5e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id546c56a4904d13d4278055f3c5a5e4548e2efd0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
With the following local patch, VIC adapters remove default vlan tags
from ingress packets. So, it is no longer necessary to enable VLAN
stripping by default. This change also allows VLAN sub interfaces to
work with VIC adapters.
patches/dpdk_19.02/0001-net-enic-untag-default-vlan-by-default.patch
Change-Id: I2e7d62c62120c351c27d827d90de4a8335efa044
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
|
|
Change-Id: I96a1d4b2b3ae22cf164c0acd6db9b323cd70f51a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I965229f5bf8fcde9176357536a23ba8056542919
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
This reverts commit 785368e559dbdf50676f74f43f13423c817abb52.
Change-Id: I782ac2be4e161790c73ccd4b08492e2188a6d79d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4dc6749a67c0726bae20b8204a5171676308b909
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
EXAMPLE:
src/plugins/perfmon/intel_json_to_c.py \
-i skylakex_core_v1.12.json \
-o src/plugins/perfmon/perfmon_intel_skx.c \
-m 0x55,0 \
-m 0x55,1 \
-m 0x55,2 \
-m 0x55,3
Change-Id: I16ce059e231d340ecfcb6f6638e29c5b46304683
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I18b30d5ee8aa60c34d52b7716b5feb7225cb0d59
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ic2d21b535a58c1c618ec9e652d30858ad45a7d43
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Like other entities, allow an arbitrray user-supplied 'tag'
field to be place on created MAP domains. It is also later
returned with the MAP details. You might be thinking "User
assigned MAP name" here.
As the MAP domain structure was at the limit of a cacheline size,
introduce a parallel "extra data" vector with non-essential domain
information in it.
Change-Id: Icc12b64cc4cb3e040c9a475908b19f6abaf4c293
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ibf320b3e7b054b686f3af9a55afd5d5bda9b1048
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
For creating the vmxnet3 interface, add the bind option to automatically bind
the pci to vfio-pci module which removes the need for manual bind. Manual bind
still works, should people prefer to go that route.
Change-Id: Ife75926f8755d754a08dd0ecff0f1de326ad5ba1
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Change-Id: Ia7d98842669c605052371c2bf6a016e4b4f7dc8f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I895c03b365619e6c66613242f4a97c79ce579879
Signed-off-by: Neale Ranns <nranns@cisco.com>
|