Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3dd65946c220f958a4fda0551b053d690bf06c39
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia8449344a471129c0d148b39d97a5d310c2a1fc7
|
|
When a listen session receives an ACCEPTED message, but then
receives either a RESET or DISCONNECTED message from VPP before the
session is accepted, the listen session state is switched to
VPP_CLOSING or DISCONNECT.
The subsequent CLEANUP message handler attempts to send a
disconneted or reset reply message to VPP, but since the vpp_evt_q
for the listen session is null, this leads to a crash.
Type: fix
Change-Id: Ic51f78f631fe8d15bf8c56b795f4a900c3e2f724
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
|
|
Maybe some function calls the wrapper funtion like read which invokes
the ldp_init_check in the other libs as a constructor before
ldp_constructor. Then the ldp has been initialized already when
ldp_constructor is invoked. And it's normal case, we shouldn't treat it
as an error.
So ldp_init should return success if ldp is initialized already instead
of an assert.
Type: fix
Change-Id: Ifa2a7b1d5471981a3f840b14a4fa5d48fb1f1374
Signed-off-by: Gao Feng <gfree.wind@outlook.com>
|
|
When a VCL_STATE_LISTEN_NO_MQ session receives an ACCEPTED message,
but then receives either a RESET or DISCONNECTED message from VPP
before the session is unlistened, the listen session state is
switched to DISCONNECT.
The subsequent CLEANUP message handler attempts to send a reset
reply message to VPP, but since the vpp_evt_q for the listen
session is null, this leads to a crash.
Type: fix
Change-Id: Id7e88dcb16df3eda912b3f763730ec8d8973473a
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
|
|
Type: fix
Change-Id: I438ef488357456e9415e51a17355e9eba8518808
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: improvement
Support SO_ORIGINAL_DST socket option to get original dst_ip4 and dst_port if nat44 rule enabled.
Change-Id: If00e00d03e48f3b78a23a68f1b078954d79dd0f7
Signed-off-by: qinyang <qiny@yusur.tech>
|
|
When msg->msg_controllen is set in recvmsg, the caller wants to receive
additional information about the messages. However, they might not
always be available. In that case, we should clear cmsg since
the caller uses CMSG_NXTHDR which might access uninitialized fields in
cmsg.
Type: fix
Change-Id: Ifdf9634bfcb1427f7ae3812014a46bfd7f4bc473
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6900d9ab147d35f99f944bf741f6bb329c8ea0df
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9f7dfe086bf7e11b7e0de7392f020c1052ba656a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I73034cdba51157466713884c3fbeae7054d92ad7
|
|
SVM_FIFO_WANT_DEQ_NOTIF_IF_FULL should be treated as a
config option that is not frequently changed. Or alternatively, it
should be set together with SVM_FIFO_WANT_DEQ_NOTIF to elicit a one time
tx notification.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie4132c7789ee87227a875ff981eb98f9f4d898a9
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic6436426ead561e47fb77ed9a95afbd85f2998ae
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5d0445ca381f1a4943bb2fe454433b3454043b56
|
|
Epoll events might not have been cleared by user so always compute event
flags locally and assign to user provided epoll event.
Type: fix
Signed-off-by: Ping Yu <ping.yu@intel.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3b594a0fd7be345a0e0ad81d1d3636e9354cc15d
|
|
On epoll ctl mod, set want deq flag before checking if unhandled events
are needed.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id1491837c7156a66c21e0e45af60b04b1c18601c
|
|
Reset deq notification flag even if session is no longer epolled.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e9aed1849aa2817176f3a54ae41910df5e704a0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic89256d16230593b61a7b3e29582444fb3f93e4d
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ife5f72dc9587c9f6b8aa513cd039fa28bb22fca3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d1976cb8061534a7e93d4dd2283abaf70a33f7c
|
|
Rename unused SESSION_IO_EVT_BUILTIN_TX to SESSION_IO_EVT_TX_MAIN and
leverage it for non-connected udp tx.
Non-connected udp sessions are listeners and are therefore allocated on
main thread. Consequently, whenever session queue node is not polling
main, tx events generated by external applications might be missed or
processed with some delay. To solve this, request that apps use
SESSION_IO_EVT_TX_MAIN tx events as opposed to SESSION_IO_EVT_TX and
send that to first worker as opposed to main.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5df5ac3dc80c0f192b2eefb1d465e9deefe8786b
|
|
This avoids printing ldp debug messages while debug is disabled and vcl
is initializing.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5dfd1d59032db937fea146b6b84b8e26307a0de0
|
|
Also make sure that only sessions with fifos try to set deq notification
flag on fifo
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I878c2d2e18bb98109ee03b42a4f0f8c48aa23e9f
|
|
Make sure session has a tx fifo.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibde40645b401ca0255da298ea4ba691ee924a2d2
|
|
Although removal from epoll means listener no longer accepts new
sessions, the accept queue built by vpp cannot be drained by stopping
the listener. Morover, some applications, e.g., nginx, might constantly
remove and add listeners to their epfds. Removing listeners in such
situations causes a lot of churn in vpp as segments and segment managers
need to be recreated.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia412b3f8d50fbb4881a99ff024f798353b521af7
|
|
Otherwise if vcl epoll lt events are ignored by the app, libc and vcl mq
events are never drained.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1e22f6da46d56236c52714181f6c20dcb80a33a5
|
|
Async binds may be possible due to vls generated async binds as a result
of application adding or removing listeners from epoll.
App does not need to be notified of the event.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4d01be7ddb39ba894db85feef55e9935556c24f5
|
|
Accept one spurious wakeup from vcl in epoll_pwait_eventfd to avoid
returning zero events to app without timeout.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I447c7f8176413c562be28605376a92d15e22a1f9
|
|
Nginx recreates epfds. Make sure ldp tracks the event and recreates the
libc epfd or eventfd flavor of epoll pwait will not work.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2994bead9494f0fbb85dd32767cecc1cf69ff6eb
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I777979dbb89f9af774533cb280e77af58b81fb29
|
|
Old distros Centos 8 / Ubuntu 18.04 header files doesn't have UDP_SEGMENT
declared, define UDP_SEGMENT to right value if not defined.
Type: fix
Fixes: eff5f7aea8c7 ("vcl: ldp support for ip_pktinfo")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I99314b895e7d09962a36e7f5582c09d0d77563dc
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2c97faa2cdca32d083aabc3344c8fe67c74ff2fd
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e176e9ada32d5f61d10aeca1c68f72114dec9b8
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1970408de52e53d24cea06b3ae0cc68a38cbc97a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3c15f38a4a3f5e92506059277948e7fca9cd8b55
|
|
For some apps(e.g. wrk2) upon vpp hoststack, ldp_epoll_pwait()
is called. In this function, epoll fd was created on one thread,
but it is now used on another thread. The vcl worker index is still
invalid, so the fetched ldp worker is also invalid and can corrupt
some already allocated memory.
Just as the ldp_epoll_pwait_eventfd(), make sure the vcl worker is valid
before getting the ldp worker in ldp_epoll_pwait().
Type: fix
Signed-off-by: Liangxing Wang <liangxing.wang@arm.com>
Change-Id: I2ec23a4b5d5b0879a06642ffd80f95e948af4274
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3bc2c7986f492b7b7dfbc84e4893202354223790
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7322abc3d3b0aa81399667bf02b03786fc62c958
|
|
Control use of apis that rely on _GNU_SOURCE being defined with compile
time macro.
Also fixes sendmmsg and recvmmsg which were not probably wrapped.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I207de23210d4b9dc960bb4289159502760c5614d
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I021f8e8bba247b0050d390a37dbc75900dc6a598
|
|
Musl is stricter than glibc and has a warning that including fctnl.h and
poll.h should be prefered rather than their sys/ counterparts, which
breaks -Wall setups.
Type: fix
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: Id101e999371951b0927cc8c4109f8f1536de1bc2
|
|
Some upon apps(e.g. Nginx-quic) package it's several protocol buffers into a struct msg
which is a combination of gso_buffer and gso_size.
but if HostStack regardless the gso_size to the buffer and split the buffer with default mss,
that cause peer client failed on parsing the package.
Type: improvement
Signed-off-by: Dou Chao <chao.dou@intel.com>
Change-Id: I805eb642be826038ba96d1b85dad8ec0c0f6c459
Signed-off-by: Dou Chao <chao.dou@intel.com>
|
|
Type: improvement
Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech>
Change-Id: I82a286e2872338974c1930138c30db78103ae499
|
|
When checking for CLIB_SANITIZE_ADDR to enable specific behavior for
AddressSanitizer, we must have vppinfra/clib.h included as it is defined
there.
Type: fix
Change-Id: I9060c3c29c1289d28596c215a1d1709b2ea7c84e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech>
Change-Id: I98bc108360f9d04a33126865ce49d2702cbe9cdf
|
|
Type: refactor
Change-Id: I7b7ca9ec62cb70243c5b7e87968eab1338d67ec8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The previous patch[37164] was a bit flawed.
Type: fix
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Change-Id: Ia9d8b9c7853e8f4b960ce7de26d0384243deb667
|
|
Type: improvement
Change-Id: I7f7050c19453a69a7fb6c5e62f8f57db847d9144
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When ESTABLISHED TCP connection is terminated by an RST packet,
EPOLLHUP + EPOLLRDHUP would be updeliever by VCL. If not using
VPP, app would receive EPOLLHUP + EPOLLERR + EPOLLIN(if requested) +
EPOLLRDHUP(if requested).
libevent will interpret the two cases as different EV combinations.
Below is the code snippet for libevent v2.12:
if (what & EPOLLERR) {
ev = EV_READ | EV_WRITE;
} else if ((what & EPOLLHUP) && !(what & EPOLLRDHUP)) {
ev = EV_READ | EV_WRITE;
} else {
if (what & EPOLLIN)
ev |= EV_READ;
if (what & EPOLLOUT)
ev |= EV_WRITE;
if (what & EPOLLRDHUP)
ev |= EV_CLOSED;
}
Type: fix
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Change-Id: Ice3d2861183b6ea499f66b727bbe175eeae5cb05
|
|
add hugepage for vcl configure and svm
Type: feature
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I6a8905e3fec23d840e629114b1e5a403d0a258ef
|