summaryrefslogtreecommitdiffstats
path: root/src/vnet/adj/adj.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-12Improve MTU handlingNeale Ranns1-0/+37
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+10
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-0/+1
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns1-3/+0
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-2/+11
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-4/+47
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-2/+1
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Mtrie optimisationsNeale Ranns1-12/+0
1 - make the default route non-special, i.e. like any other less specific route. Consequently, all buckets have a valid valid index of either a leaf or a ply. Checks for special indeices in the data-path can thus be removed. 2 - since all leaves are now 'real' i.e. they represent a real load-balance object, to tell if a ply slot is 'empty' requeirs chekcing that the prefix length of the leaf occupying the slot is slot than the minium value for that ply. 3 - when removing a leaf find the cover first, then recurse down the ply and replace the old leaf with the cover. This saves us a ply walk. Change-Id: Idd523019e8bb1b6ef527b1f5279a5e24bcf18332 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-1/+1
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-10/+72
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-03-07make per-adj counters configurableNeale Ranns1-28/+93
Change-Id: Ifdd2b204ecf7d855f1269c11224b9c825311904d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-22/+0
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-2/+9
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-25[re]Enable per-Adjacency/neighbour countersNeale Ranns1-0/+4
Change-Id: I953b3888bbc6d8a5f53f684a5edc8742b382f323 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+454
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>