aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/bonding/device.c
AgeCommit message (Collapse)AuthorFilesLines
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion1-4/+4
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne1-7/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-03-04bonding: coverity woe in bond_dev_class fuctionSteven Luong1-5/+14
Coverity complans the line h = hashes; uses uninitialized variable if the prior ASSERT statement is hit. ASSERT is compiled out coverity as well as in release image. So the complain is legitimate. Change the ASSERT to drop the frame and log an error instead. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ibf0c204fe3626afca69ea84484e606566cf3244c
2020-11-20ip-neighbor: Use ip_address_t rather than ip46_address_tNeale Ranns1-1/+4
Type: improvement Change-Id: Ica5f395075677bda5f38d28e704f65350af88610 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-11-09vlib: fix trace number accountingBenoît Ganne1-18/+21
When using classifier to filter traces, not all packets will be traced. In that case, we should only count traced packets. Type: fix Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-07-28bonding: toggle bond admin state may cause hw link state to downSteven Luong1-1/+1
For bond interface, we set hardware link state to up initially when admin state is set to up. Thereafter, if we toggle the admin state to down and up, we require at least one active member in the bond prior to bringing up the hardware state which is inconsistent. The fix is to remove the unnecessary condition. This is a rework of the original proposed patch which is more complex and could be tricky to get it right https://gerrit.fd.io/r/c/vpp/+/27141 Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I65f4fee55299b5b4d5645f6e05e1be15b46b73cd
2020-07-28bonding lacp: replace slave string with memberSteven Luong1-75/+78
- Replace textual string slave with member except APIs. - For APIs, mark the existing APIs as deprecated and introduce new APIs - While introducing sw_bond_interface_dump, add the optional filter by sw_if_index and enhance the testcases to make use of it. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ib6626c514e45350308aeeda0decb70f3aba2f63e
2020-05-16l2: L2/L3 mode swicth cleanup and l2-patch fixJohn Lo1-6/+2
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node as it is no longer necessary. L2 patch should use sw_if_index for device feature enable/disable. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-3/+2
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-02bonding: add/del secondary mac address callbackMatthew Smith1-0/+45
Type: feature Add a callback to the bond device class which allows a secondary mac address to be added/deleted. The desired operation is performed on all the hardware interfaces which belong to the bond interface. This allows virtual MAC addresses to be used on bond interfaces without requiring the hardware interfaces to have promiscuous mode enabled. When a hardware interface is added or removed from a bond, if there are any secondary MAC addresses configured on the bond, they are added or removed from the hardware interface. Change-Id: If9488078b4d7869ecc56ef6853f3cc9891211860 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-10-06bonding: traffic traversing the wrong interfaceSteven Luong1-0/+1
Missing an increment in the while loop. Hashes not stored in the array. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53 (cherry picked from commit 0471cdbd3fe04a88a8b70b5f0eff0c378e19abf7)
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-08-17bonding lacp: deleting virtual interface which was enslaved may cause crashSteven Luong1-3/+23
Virtual interfaces may be part of the bonding like physical interfaces. The difference is virtual interfaces may disappear dynamically. As an example, the following CLI sequence may crash the debug image create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 delete vhost-user VirtualEhernet0/0/0 Notice the virtual interface is deleted without first doing bond delete. The proper order is to first remove the slave interface from the bond prior to deleting the virtual interface as shown below. But we should handle it anyway. create vhost-user socket /tmp/sock1 create bond mode lacp bond add BondEthernet0 VirtualEthernet0/0/0 bond del VirtualEthernet0/0/0 <----- delete vhost-user VirtualEhernet0/0/0 The fix is to register for VNET_SW_INTERFACE_ADD_DEL_FUNCTION and remove the slave interface from the bond if the to-be-deleted interface is part of the bond. We check the interface that it is actually up before we send the lacp pdu. Up means both hw and sw admin up. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If4d2da074338b16aab0df54e00d719e55c45221a
2019-07-25bonding: incorrect RX counters for bond interfaceSteven Luong1-5/+0
show interface does not display the RX counters for the bond interfaces. It displays rx-no-buf instead. The problem is VNET_INTERFACE_COUNTER_RX is a combined counter, not a simple counter. Change the code to use vlib_increment_combined_counter passing it with n_rx_packets and n_rx_bytes. Type: fix Change-Id: I8121ad7e546447049fa13da62481b6c8f5575bec Signed-off-by: Steven Luong <sluong@cisco.com>
2019-07-19bonding: add support for numa-only in lacp modeZhiyong Yang1-0/+5
If numa-only is set, Only slaves on local numa node transmit pkts if have at least one, otherwise the bond interface works as usual. CLI change: create bond mode lacp [load-balance { l2 | l23 | l34 } {numa-only}] [hw-addr <mac-address>] [id <if-id>] The new member "u8 numa_only;" is also added to bond_create_if_args_t. Type: feature Change-Id: Icdccedafb0738d8c9d4a5acce909ce562428c071 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-20bonding: clean up redundant codeZhiyong Yang1-55/+44
1. remove unnecessary cast for void * pointer. 2. remove the unused input parameter. Change-Id: Ic0324364fc0c772200d30fb18a0ba959ed4f7ea4 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-17Revert "Revert "bond: problem switching from l2 to l3""Steven Luong1-0/+11
This reverts commit 5d0d5494db58422eb528c0f8b39a86ea966505e9. The csit crash was actually due to the test image missing the patch https://gerrit.fd.io/r/#/c/17731/ It was a mistake to revert the original patch https://gerrit.fd.io/r/#/c/15577/ Change-Id: I7fc563981aa13d308d55b25194fee21475ebc57d Signed-off-by: Steven Luong <sluong@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-2/+2
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-21Revert "bond: problem switching from l2 to l3"Peter Mikus1-11/+0
During CSIT testing we discovered that LACP tests were failing and producing coredumps. Reverting this patch fix the problem with VPP crashing. This reverts commit f23890138e02d4218c828c427f687f8ecdb0e165. Change-Id: Icf97053ce1473350add885cbebe591f7f3efcbea Signed-off-by: Peter Mikus <pmikus@cisco.com>
2019-01-13bonding: support custom interface IDsAlexander Chernavin1-1/+1
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-2/+2
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-2/+2
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-29bond: problem switching from l2 to l3Steven1-0/+11
when the last interface is removed from l2 in the bonding group, we should invoke ethernet_set_rx_direct to allow ip packets to go directly to ip4-input. Change-Id: I43b3cd64e2c119762edd0c295bb9348732adab45 Signed-off-by: Steven <sluong@cisco.com>
2018-10-17bond: tx optimizationsDamjan Marion1-305/+328
Break up bond tx function into multiple small workloads: 1. parse the packet header and hash it based on the configured algorithm 2. optionally, trace the packet 3. convert the hash value from (1) to the slave port 4. update the buffers with the slave sw_if_index 5. Add the buffers to the queues 6. Create and send the frames old numbers ----------- Time 5.3, average vectors/node 223.74, last 128 main loops 40.00 per node 222.61 vector rates in 3.3627e6, out 6.6574e6, drop 3.3964e4, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 68998 17662979 0 1.89e1 255.99 BondEthernet0-tx active 68998 17662979 0 2.60e1 255.99 TenGigabitEthernet3/0/1-output active 68998 8797416 0 1.03e1 127.50 TenGigabitEthernet3/0/1-tx active 68998 8797416 0 7.85e1 127.50 TenGigabitEthernet7/0/1-output active 68996 8865563 0 1.02e1 128.49 TenGigabitEthernet7/0/1-tx active 68996 8865563 0 7.65e1 128.49 new numbers ----------- BondEthernet0-output active 304064 77840384 0 2.29e1 256.00 BondEthernet0-tx active 304064 77840384 0 2.47e1 256.00 TenGigabitEthernet3/0/1-output active 304064 38765525 0 1.03e1 127.49 TenGigabitEthernet3/0/1-tx active 304064 38765525 0 7.66e1 127.49 TenGigabitEthernet7/0/1-output active 304064 39074859 0 1.01e1 128.51 Change-Id: I3ef9a52bfe235559dae09d055c03c5612c08a0f7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-05bond: tx perf improvement, part troisDamjan Marion1-65/+164
Introduce bond_tx_inline which takes lb as a constant for gcc to do the optimization The number appears a tad better for 256 bytes frame. with the patch -------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4836e6, out 1.6967e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 141054 36109824 0 2.51e1 256.00 BondEthernet0-tx active 141054 36109824 0 2.55e1 256.00 TenGigabitEthernet6/0/0-output active 141054 18055469 0 9.43e0 128.00 TenGigabitEthernet6/0/0-tx active 141054 18055469 0 6.97e1 128.00 TenGigabitEthernet6/0/1-output active 141054 18054355 0 9.54e0 127.99 TenGigabitEthernet6/0/1-tx active 141054 18054355 0 7.05e1 127.99 bond-input active 141054 36109824 0 1.76e1 256.00 dpdk-input polling 70527 36109824 0 5.03e1 512.00 ethernet-input active 141054 36109824 0 6.12e1 256.00 ip4-input active 141054 36109824 0 3.26e1 256.00 ip4-lookup active 141054 36109824 0 2.94e1 256.00 ip4-rewrite active 141054 36109824 0 3.27e1 256.00 without the patch ----------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4443e6, out 1.6889e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 142744 36542464 0 2.51e1 256.00 BondEthernet0-tx active 142744 36542464 0 2.67e1 256.00 TenGigabitEthernet6/0/0-output active 142744 18270813 0 9.19e0 127.99 TenGigabitEthernet6/0/0-tx active 142744 18270813 0 6.98e1 127.99 TenGigabitEthernet6/0/1-output active 142744 18271651 0 9.43e0 128.00 TenGigabitEthernet6/0/1-tx active 142744 18271651 0 7.02e1 128.00 bond-input active 142744 36542464 0 1.76e1 256.00 dpdk-input polling 71372 36542464 0 5.08e1 512.00 ethernet-input active 142744 36542464 0 6.15e1 256.00 ip4-input active 142744 36542464 0 3.23e1 256.00 ip4-lookup active 142744 36542464 0 2.96e1 256.00 ip4-rewrite active 142744 36542464 0 3.28e1 256.00 Change-Id: I9fd43eda3c735cbff680ac6d2f01ecdae81f0eda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-09-28bond: tx performance enhancement part deuxSteven1-110/+76
- Reduce per packet cost by buffering the output packet buffer indexes in the queue and process the queue outside the packet processing loop. - Move unnecessary variable initialization outside of the while loop. - There is no need to save the old interface if tracing is not enabled. Test result for 256 bytes packet comparison. Other packet size shows similar improvement. With the patch -------------- BondEthernet0-output active 52836 13526016 0 1.71e1 256.00 BondEthernet0-tx active 52836 13526016 0 2.68e1 256.00 TenGigabitEthernet6/0/0-output active 52836 6762896 0 9.17e0 127.99 TenGigabitEthernet6/0/0-tx active 52836 6762896 0 6.97e1 127.99 TenGigabitEthernet6/0/1-output active 52836 6763120 0 9.40e0 128.00 TenGigabitEthernet6/0/1-tx active 52836 6763120 0 7.00e1 128.00 bond-input active 52836 13526016 0 1.76e1 256.00 Without the patch ----------------- BondEthernet0-output active 60858 15579648 0 1.73e1 256.00 BondEthernet0-tx active 60858 15579648 0 2.94e1 256.00 TenGigabitEthernet6/0/0-output active 60858 7789626 0 9.29e0 127.99 TenGigabitEthernet6/0/0-tx active 60858 7789626 0 7.01e1 127.99 TenGigabitEthernet6/0/1-output active 60858 7790022 0 9.31e0 128.00 TenGigabitEthernet6/0/1-tx active 60858 7790022 0 7.10e1 128.00 bond-input active 60858 15579648 0 1.77e1 256.00 Change-Id: Ib6d73a63ceeaa2f1397ceaf4c5391c57fd865b04 Signed-off-by: Steven <sluong@cisco.com>
2018-09-26bond: tx perf improvementsDamjan Marion1-216/+172
Change-Id: I0c3f2add35ad9fc11308b7a2a2c69ffd8472dd2e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-2/+2
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-05bond: send gratuitous arp when the active slave went down in active-backup modeSteven1-0/+48
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead of vnet_hw_interface_t and add call to build_ethernet_rewrite to support subinterface/vlan - Add code to bonding driver to send an event to bond_process when the first interface becomes active or when the active interface is down - Create a bond_process to walk the interface and the corresponding subinterfaces to send garp/ip6_na when an event is received. - Minor cleanup in bonding/node.c Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is no attempt to fix it here. But the infra is now done and should be easy to add the support. Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1 Signed-off-by: Steven <sluong@cisco.com>
2018-05-25bond: performance harvestingSteven1-109/+146
- hash is great. But it is a bit too slow for the DP. Use direct array indexing to quickly retrieve the slave interface. - the algorithm used by flow hash is great. But it is a bit too slow for the DP. Use l2_hash_hash() extracted from lb_hash.h which ECMP is using. It makes use of intrinsic crc32 instruction set. - shortcut modulo arithmetic when the operand is 2**x (where x up to 4) to avoid division instruction. - special case for link count == 1 in bond_tx_fn() - use clib_mem_unaligned to access data for the packet to avoid alignment error - Fix some typos for packet tracing. Change-Id: I8eae3ad497061c5473aa675ba894ee0211120d25 Signed-off-by: Steven <sluong@cisco.com>
2018-04-24lacp: deleting the bond subinterface may cause lacp to lose the partner ↵Steven1-12/+0
[VPP-1251] Problem: When the bond subinterface is removed, it was observed that we lost the lacp partner. Show hardware shows rx counter goes up, but show interface does not for the slave interfaces. Cause: We reset the interface promiscuous mode when the bond subinterface is deleted. This causes dpdk not to accept any packet. Leave the interface in promiscuous mode fixes the problem. Other fixes: There are few places we use hw_if_index as if they are sw_if_index. But they don't necessarily have the same value. As soon as a subinterface is created, they start to diverge. The fix is to use the correct API for the hw_if_index and sw_if_index. Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91 Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven1-0/+43
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-12bond: 1 packet/frame == bad performance [VPP-1236]Steven1-6/+8
While https://gerrit.fd.io/r/#/c/11316/ took care of 1 packet/frame for most of the bonding modes, it missed the broadcast mode. This patch is to fix the 1 packet/frame for the broadcast mode. Change-Id: Iac48a2977c7f702f341479cc712a6448090dbc60 Signed-off-by: Steven <sluong@cisco.com>
2018-03-27bond: coverity woesSteven1-26/+31
coverity complains about statements in function A function A { x % vec_len (y) } because vec_len (y) is a macro and may return 0 if the pointer y is null. But coverity fails to realize the same statement vec_len (y) was already invoked and checked in the caller of function A and punt if vec_len (y) is 0. We can fix the coverity warning and shave off a few cpu cycles by caching the result of vec_len (y) and pass it around to avoid calling vec_len (y) again in multiple places. Change-Id: I095166373abd3af3859646f860ee97c52f12fb50 Signed-off-by: Steven <sluong@cisco.com>
2018-03-22bond: performance enhancementSteven1-155/+195
We were only puting one packet per frame to the output node. Change to buffer multiple packets per frame. Performance is now on top of dpdk-based bonding. Put a spinlock in the tx thread in case the rug is pulled under us. Change-Id: Ifda5af086a984a7301972cd6c8e428217f676a95 Signed-off-by: Steven <sluong@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven1-0/+610
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>