Age | Commit message (Collapse) | Author | Files | Lines |
|
The following command sequences cause the crash:
create tap id 0 rx-ring-size 1024 tx-ring-size 1024
create tap id 1 rx-ring-size 1024 tx-ring-size 1024
set interface state tap0 up
set interface state tap1 up
delete tap tap0
delete tap tap1
create tap id 0 rx-ring-size 1024 tx-ring-size 1024
0: /home/sluong/vpp2/vpp/build-data/../src/vnet/interface_funcs.h:46
(vnet_get_hw_interface) assertion `! pool_is_free (vnm->interface_main.hw_interfaces, _e)' fails
The reason for the crash is because when the tap interface is deleted,
the code does not remove the entry from the device queue. But the interface
is deleted anyway from vnet_main.interface_main.hw_interfaces.
When an interface is created again, it may encounter
the deleted entry in the device queue and crash. Notice create and delete a
single entry does not cause a crash. Need to create and delete 2 interfaces
to create a "hole" in the device queue.
Change-Id: I42ce0b7943d73b3eab32a16751a0a3183de62d9f
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 0b8567331c3edf8b6aee51c849b8391a2922d9ab)
|
|
Change-Id: I373f429c53c6f66ad38322addcfaccddb7761392
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib04a8787038fb536470a04d99fdc165102edfb5a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Buffers may be allocated for indirect descriptors by tx thread and
they are freed when tx thread is invoked in the next invocation.
This is to allow the recipient (kernel) to have a chance to process
them. But if the tap interface is deleted, the tx thread may not yet
be called to clean up the indirect descriptors' buffers. In that case,
we need to remove them without waiting for the tx thread to be called.
Failure to do so may cause buffers leak when the tap interface is deleted.
For the RX ring, leakage also exists for vring->buffers when the interface
is removed.
Change-Id: I3df313a0e60334776b19daf51a9f5bf20dfdc489
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I1bbd3f6ece255edfd4ebf268ac60f79dce1d10e7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- change interface naming scheme
- rework netlink code
- add option to set link address, namespace
Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ica1be5c75c83ac64c7063bfeff1f4d00702a00e1
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
virtio backend stays in vnet/devices/virtio
Change-Id: Idbf04f1c645a809ed408670ba330662859fe9309
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
fd is not close when IOCTL encounters an error which causes resource
leak. The fix is to initialize fd to -1. At return, close fd if
it has a valid value.
Change-Id: I53c4f5c71ca0f556fb6586f5849e7cb622632d8f
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I877cf1abb062a90f428c3ec0cab5c6e9dad0ca82
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- add support for assigning tap interface to the bridge
- add support for assigning tap interface host side ip4 and ip6 address
- host namespace can be specified as PID (pid:12345) or full path to file
- automatically bring linux interface up
Change-Id: I1cf7c3cad9a740e430cc1b9c2bb0aad0ba4cc8d8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix 3 coverity warnings
1. api_format.c: init net_ns = 0 and remove its corresponding vec_add and
vec_free
2. netlink.c (reported in tap.c before the code was removed): resource leaked
due to fd is not close
3. tap.c: subtract 1 for size when calling strncpy to accommodate the
terminated NULL character
Change-Id: Iff4e66604862f0c06dac227b8cfd48d3979e41a5
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib091875f77ea99421aec0947fd17833c4e6d2ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ided667356d5c6fb9648eb34685aabd6b16a598b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Change-Id: I2fde74b53d6b4dc54d4af7020130f7b22463d70f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit fa600c9169c0d7104af7a9be12a0471a8a8c8262.
Change-Id: I873b53b2c025d7aba2211cab9b3e2d780af33b32
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
Change-Id: Ie07b71977c46d2f1e030799a08cc5af0fdc397aa
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
Change-Id: I42ee5898e1f775692811eebab11bcfe458f1ec63
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I1075e5d2a1b6dfe3a443b40b41b8458a30505680
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
Signed-off-by: Jakub.Grajciar@pantheon.tech <Jakub.Grajciar@pantheon.tech>
|
|
With heavy traffic, tx code path may crash due to memory corruption
Thread 5 "vpp_wk_2" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fff3995c700 (LWP 2505)]
0x00007ffff73675e8 in vhost_user_if_input (vm=0x7fffb5f5bf9c,
vum=0x7ffff7882a40 <vhost_user_main>, vui=0x7fffb65570c4, qid=0,
node=0x7fffb6577dac, mode=VNET_HW_INTERFACE_RX_MODE_POLLING)
at /home/sluong/vpp-master/vpp/build-data/../src/vnet/devices/virtio/vhost-user.c:1610
1610 bi_current = (vum->cpus[thread_index].rx_buffers)
[vum->cpus[thread_index].rx_buffers_len];
(gdb) p vum->cpus[thread_index].rx_buffers_len
$2 = 793212607
(gdb)
Apparently, some code accidentally wrote the bad value in rx_buffers_len.
rx_buffers_len should never be greater than 1024 since that is how many buffers
we request each time.
After debugging many hours, I discovered that the memory corruption happens
in the tx code path right here on line 2176.
{
vhost_copy_t *cpy = &vum->cpus[thread_index].copy[copy_len];
copy_len++;
cpy->len = bytes_left;
cpy->len = (cpy->len > buffer_len) ? buffer_len : cpy->len;
cpy->dst = buffer_map_addr;
cpy->src = (uword) vlib_buffer_get_current (current_b0) +
current_b0->current_length - bytes_left;
(gdb) p cpy
$3 = (vhost_copy_t *) 0x7fffb554077c
(gdb) p copy_len
$4 = 1025
(gdb) p &vum->cpus[3].rx_buffers_len
$8 = (u32 *) 0x7fffb5540784
copy_len is picking up the index entry 1024 before it was incremented. copy array has only
1024 members (0 - 1023 are valid).
The assignment here in cpy surely causes memory corruption. It is only discovered later
when the memory location that it corrupted is used.
The condition for the crash is to transmit jumbo frames under heavy volume. Since ring
size is 1024, with one packet taking up one index for frame size (less 2048), it does
not cause overflow. With jumbo frames, it requires multiple indices for one packet,
it can cause the overflow under heavy traffic.
The fix is to do copy out when we have 1000 entries in the array to avoid
overflow.
Change-Id: Iefbc739b8e80470f1cf13123113f8331ffcd0eb2
Signed-off-by: Steven <sluong@cisco.com>
|
|
Issues observed with specific kernel versions, e.g. stock Ubuntu 16.04
kernel.
This reverts commit 3eab064e3fadaf2a6a128f167ad04ca0319b4e17.
Change-Id: I24241f3b580df749fc686af3a319011ca035fb5e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add one of these statements to foo.api:
vl_api_version 1.2.3
to generate a version tuple stanza in foo.api.h:
/****** Version tuple *****/
vl_api_version_tuple(foo, 1, 2, 3)
Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
A bug was reported where a jumbo packet would stay in vhost
queue forever or until a large enough number of other packets
arrived in the queue too.
This is due to a bug in vhost input node buffer allocation.
The fix is to make sure that vhost always allocates at least
enough buffers for one single big packet. '40' is used to
account for 65kB frames.
Change-Id: I1d293028854165083e30cd798fab9d4140230b78
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
(cherry picked from commit 67700d41169ac37d21c400949a316750eabad969)
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
1. Add VNET headers support for checksumming - required
to operate correctly on any recent Linux
2. Bypass QDISC on transmit - improves performance by ~ 5%.
Enabled only if the macro is detected - apparently not
present on archaic distributions.
This still does not solve all issues with TSO - it can be
fixed only by going to tpacket v3 and dynamic rx ring as
well as significant changes in the TX (sendmmsg?).
Change-Id: Iea14ade12586c0a8da49e6dd1012108a08bc85b3
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
|
|
On host interface if a VLAN tagged packet is received, linux kernel removes
the VLAN header from packet byte stream and adds metadata in tpacket2_hdr.
This patch explicitely checks for the presense of VLAN metadata and adds it
in VPP packet.
Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa
Signed-off-by: Akshaya N <akshaya@rtbrick.com>
|
|
When changing the admin state of a vhost-user interface, do not put it
in link-up mode if the interface is not actually ready.
Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
Change-Id: Iff33694fc42cc3bcc73cf1372339053a6365039c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This will allow us to use this code in client libraries without vlib.
Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id79d2c2be7a98e15416a537c890a8f2dd6d4464d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When I type in set interface rx-mode with a nonexistent queue, I got a crash with the following
traceback. It looks like the vm is NULL when vlib_node_get_runtime is called.
DBGvpp# sh int rx
Thread 0 (vpp_main):
node dpdk-input:
TenGigabitEthernet5/0/0 queue 0 (polling)
TenGigabitEthernet5/0/1 queue 0 (polling)
TenGigabitEthernet7/0/0 queue 0 (polling)
TenGigabitEthernet7/0/1 queue 0 (polling)
node vhost-user-input:
VirtualEthernet0/0/2 queue 0 (adaptive)
DBGvpp# set interface rx-mode VirtualEthernet0/0/2 queue 1 polling
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
0x00007ffff6d4e0bc in vlib_node_get_runtime (vm=0x0, node_index=125)
at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92
92 vlib_node_t *n = vec_elt (nm->nodes, node_index);
(gdb) where
at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92
at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:112
vnm=0x6f0fa0 <vnet_main>, hw_if_index=7, queue_id=1, mode=0x7fffb62099e8)
at /home/sluong/vpp/build-data/../src/vnet/devices/devices.c:307
hw_if_index=7, queue_id=1, mode=VNET_HW_INTERFACE_RX_MODE_POLLING)
at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1192
vm=0x7ffff7b9d440 <vlib_global_main>, input=0x7fffb6209ef0,
cmd=0x7fffb61d5d14)
at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1288
vm=0x7ffff7b9d440 <vlib_global_main>,
cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0,
parent_command_index=18)
at /home/sluong/vpp/build-data/../src/vlib/cli.c:588
vm=0x7ffff7b9d440 <vlib_global_main>,
cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0,
parent_command_index=12)
The fix is to add a check for vec_len(hw->input_node_thread_index_by_queue)
and vec_len (hw->rx_mode_by_queue) to reject the command if the queue_id is
out of bound. While at it, I notice inputting queue_id=-1 is being interpreted
as all queues. An easy fix is to not overload the queue_id variable with -1 to
mean something else.
Change-Id: Id70ec3e7d06ccc67635e6d28ef53420bdac4a988
Signed-off-by: Steven <sluong@cisco.com>
|
|
According to the spec, supporting interrupt mode from the driver is optional,
not a must. When interrupt mode is configured on the interface, we should
check to make sure that the driver didn't opt out for the kickfd support and
reject the configuration if it did.
Change-Id: I7d3dbaddde65458e1a6a802754a3768ae8685a0e
Signed-off-by: Steven <sluong@cisco.com>
|
|
In the data path, we grab qsz from vhost_user_vring_t to compute
qsz_mask and store it in a stack variable to use on many occasions.
We never use qsz for any meaningful purpose. It is more useful to
cache qsz_mask in vhost_user_vring_t to avoid the needless computation
in the data path.
Change-Id: Idf4d94a9754d5c75c899f1f4f59602275b9904a6
Signed-off-by: Steven <sluong@cisco.com>
|
|
create/delete/modify vhost_user APIs no longer support the operation mode
(polling/interrupt/adaptive). They are now done via the generic interface.
Change-Id: I9e9bd503f9b56c953ecd2b271b3e2007da20c72a
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I0124fa264f7f390fc7cd9722da59be03116831c5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
(VPP-916)
The syntax for debug vhost-user is
debug vhost-user <on | off>
However, currently the code does not reject the invalid command such as below
debug vhost-user
debug vhost-user on blah
debug vhost-user off blah
The fix is to enforece the correct syntax and reject the command when invalid
option is entered.
Change-Id: I1a04ae8ddb6dd299aa6d15b043362964e685ddde
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 6a4de2764d9e6cadf36af824dddb3f33c2d6dc7e)
|
|
A call to 'clib_smp_swap (&((dq)->interrupt_pending), 0)' was creating
a SIGBUS.
Instead of making dq->interrupt_pending aligned on 64bits, we reduce the size
from uword (u64) to u32, as the number of pending interrupts will never
go above max of u32.
Change-Id: Ifa5a6d3b7adee222329a671be01305cf50853b33
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
If interface is down and queues are not configured then we are not able
to change rx-mode. This change introducess default mode which is stored
per interface and applied if driver wants.
Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I25ccf8260dbe7e1550aee3904a688fc135ce1f03
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add runtime debug vhost-user on | off CLI to facilitate troubleshooting.
This feature is needed to avoid recompiling the code to debug vhost issues.
The debugging messages should not be on the data path to avoid performance
hit.
Change-Id: I4c40f65dbb222557cba3fb8706fa3b7b62eec95f
Signed-off-by: Steven <sluong@cisco.com>
|
|
Fix coverity error associated with fd.
Change-Id: I0648aebaf356308bc03cc7217922479bfc4e22f7
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
|
|
and add adaptive mode support to receive queue
- Migrate vhost to use device infra which does the interface/queue to worker
thread assignment.
- Retire vhost thread CLI and corresponding code which assigns interface/queue
to worker thread. set interface placement should be used instead to customize
the interface/queue to worker thread assignment.
- Retire vhost interrupt/polling option when creating vhost-user interface.
Instead, set interface rx-mode should be used.
- Add code in vnet_device_input_unassign_thread to change the node state
to interrupt if the last polling interface has left the worker thread for the
device of the corresponding interface/queue.
- Add adaptive mode support. The node state is set to interrupt initially.
When the scheduler detects a burst of traffic, it switches the input node to
polling. Then we inform the device that we don't need interrupt notification.
When the traffic subsides, the scheduler switches the input node back to
interrupt. Then we immediately tell the driver that we want interrupt
notification again.
- Remove some duplicate code in vlib/main.c
Change-Id: Id19bb1b9e50e6521c6464f470f5825c26924d3a8
Signed-off-by: Steven <sluong@cisco.com>
|
|
When processing a vring descriptor which is outside of mmap, we disable
the interface and spit a message to shut/no shut the interface. This is
not practical as application using vhost cannot constantly checking the
logs and do the recovery. The proposed fix is to log an error, like
other errors that we encounter.
The other bug is buffer leak in the function rewind. At the end of the
while loop when b_current != b_head, we still have to give back 1 more
buffer or add 1 to rx_buffers_len.
Change-Id: I68c0b24f070e644cd8878f42272a7b518f14393f
Signed-off-by: Steven <sluong@cisco.com>
|
|
Added support to the interfaces mac address.
Resolved an fd leak when the interface is a bridge.
Change-Id: I6608c51b11a50bd0ae4aabe0dc5788c4301b5a1e
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
|