summaryrefslogtreecommitdiffstats
path: root/src/vnet/dpo
AgeCommit message (Collapse)AuthorFilesLines
2017-10-14change format_get_indent() to use u32 instead of uwordGabriel Ganne1-1/+1
This follows commit d3c008d108aa2187d1a2afe2833b4de25ca2c2ab by Christophe Fontaine. Change-Id: I0c4df40df44be2ac0ab25817fa050a1f619eca4d Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-2/+2
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns4-1/+436
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine5-8/+8
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-09-11FIB table add/delete APINeale Ranns2-8/+24
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-21PPPoE usses a midchain adjacency stack on an interface-tx DPONeale Ranns7-506/+670
1) introduce an interface-tx DPO. This is a simple wrapper around a sw_if_index. enhance DPO stacking functions to allow per-instance next-nodes and hence allow children to stack onto the interface per-instance tx node and not on 'interface-output'. 2) update PPPoE code to use ta midchain stack on a interface-tx DPO of the encap-interface. This remove the need for pppoe_encap node (which is replaced by the adj-midchain-tx) and interface-output node is no longer used (see above). Since PPPoE encap node is no longer needed, the PPPoE seesion does not need to be retrieved in the data-path, hence the cahce misses are removed. Change-Id: Id8b40f53daa14889a9c51d802e14fed7fba4399a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns4-9/+96
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-30VPP debug image with worker threads hit assert on adding IP route with ↵Neale Ranns1-1/+16
traffic (VPP-892) When stacking DPOs the VLIB graph is also updated to add the edge between the nodes, if this edge does not yet exist. This addition should be done with the workers stopped. Change-Id: I327e4d7d26f0b23eb280f17e4619ff2093ff7940 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit c02bd03ddf5eec9e9c79811360685f13e4ba8ee1)
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-6/+41
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS hash function improvementsNeale Ranns1-1/+1
Change-Id: I28e98f445c01493562b6196a4f5b532a51f178af Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24Missing VLIB node for IPv6 disposition from mcast MPLS LSPNeale Ranns1-1/+23
Change-Id: Ibc0e1910a4926fdfbf74571efb5fd5810bfa09da Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-0/+3
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-10completelly deprecate os_get_cpu_number, replace new occurencesDamjan Marion1-4/+4
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-05First commit SR MPLSPablo Camarillo1-1/+1
Change-Id: I961685a2a0e4c314049444c64eb6ccf877c278dd Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns2-1/+33
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-18Memory leak in load-balance mapsNeale Ranns1-3/+10
Change-Id: Iec67ae1232e346d5e0000e0b4c997fdc31865bc6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns11-24/+1213
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion2-16/+16
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-01MTRIE Optimisations 2Neale Ranns2-5/+5
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY. 2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type 3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool. Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Mtrie optimisationsNeale Ranns2-12/+11
1 - make the default route non-special, i.e. like any other less specific route. Consequently, all buckets have a valid valid index of either a leaf or a ply. Checks for special indeices in the data-path can thus be removed. 2 - since all leaves are now 'real' i.e. they represent a real load-balance object, to tell if a ply slot is 'empty' requeirs chekcing that the prefix length of the leaf occupying the slot is slot than the minium value for that ply. 3 - when removing a leaf find the cover first, then recurse down the ply and replace the old leaf with the cover. This saves us a ply walk. Change-Id: Idd523019e8bb1b6ef527b1f5279a5e24bcf18332 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17MPLS performance improvments.Neale Ranns2-31/+119
1 - Quad loop lookup and label imposition. 2 - optimise imposition for the 1 label case 3 - input gets TTL from header directly (no byte swap) Change-Id: I59204c9e5d134b0df75d7afa43e360f946d1ffe7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-28vlib: add buffer cloning supportDamjan Marion2-44/+35
Change-Id: I50070611af15b2b4cc29664a8bee4f821ac3c835 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-24VPP-650: handle buffer failure in vlib_buffer_copy(...)Dave Barach1-1/+31
Change-Id: I6aac48d780fcd935818221044eae50067f225175 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-21dhcp: multiple additionsNeale Ranns1-0/+5
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-16Add NSH load-balance and drop DPOFlorin Coras2-2/+104
Also adds missing gpe nsh address type functions. Change-Id: I3353a23c0518da9ce3b221ddf8c5bd0364930154 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras2-2/+6
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-03Next node frame over-flow after replicationNeale Ranns1-2/+16
Change-Id: I25077dd0739787de4f7512e5a70a62e8c34c28e4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-02Fix SR multicast post mfib commitNeale Ranns1-9/+5
1 - use the SR policy to construct the replicate DPO. Each bucket therein is a SR tunnel. 2 - install a special mfib entry that links via this replicate 3 - forwarding is now mfib-lookup -> replicate -> sr_rewrite (per-tunnel) no need for a separate sr_replicate node. 4 - Stack the sr tunnel on the forwarding DPO of the first-hop FIB entry. no need for a second lookup post SR encap. 5 - fix some path-list lock leaks in the MFIB entry. Change-Id: I20de96ea4c4be4fae252625bde159d9c435c8315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns6-2/+931
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-05FIB memory leaks (VPP-578)Neale Ranns2-16/+19
1) vec_free the fe_srcs of a fib_entry_t when the fib_entry_t is itself reed 2) in the load-balance fixup if a drop path is required add this to a new vector of next-hops 'fixed_nhs'. This vector is managed by the load-balance function. The caller continues to manage its own set. The function is now const implying that the caller is safe to assume the next-hops do not change. Change-Id: I0f29203ee16b9a270f40edf237488fa99ba65320 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion20-0/+5848
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>