summaryrefslogtreecommitdiffstats
path: root/src/vnet/interface.h
AgeCommit message (Collapse)AuthorFilesLines
2021-01-21interface: rx queue infra rework, part oneDamjan Marion1-0/+42
Type: improvement Change-Id: I4008cadfd5141f921afbdc09a3ebcd1dcf88eb29 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-13interface: add multiarch support for per-interface tx nodeBenoît Ganne1-3/+1
Type: improvement Change-Id: Ia4ce47c0f727cf7b02294f05b94f14e788f52f30 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-05feature: reset interface feature arc on interface deletionBenoît Ganne1-0/+2
When removing an interface we must reset all per-interface per-feature arc data to ensure we do not get wrong feature arc config data when the sw_if_index is recycled. Type: fix Change-Id: I8c9d850d7c62b7b77193da4258ab5fb9bdda85a6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-10-08interface: shorten vnet_hw_if_rx_modeDamjan Marion1-10/+10
This is part of bigger refactor. Type: refactor Change-Id: I6fc2c0a1e2d217a70952901bcf775b8485bd3c20 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-09interface: support configuring RSS steering queuesChenmin Sun1-0/+12
This patch adds the RSS steering queues set interface, and it's implementation in DPDK device: /* Interface to set rss queues of the interface */ typedef clib_error_t *(vnet_interface_rss_queues_set_t) (struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi, clib_bitmap_t *bitmap); This patch also introduces a command line to set the RSS queues: set interface rss queues <interface> <list <queue-list>> To display the rss queues, use "show hardware-interfaces" Below is the example to configure rss queues for interface Gig0: vpp# set interface rss queues Gig0 list 0,2,4-7 vpp# show hardware-interfaces brief Name Idx Link Hardware VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0 Link speed: unknown RSS queues: 0 2 4 5 6 7 local0 0 down local0 Link speed: unknown vpp# Users can also configure the rss queues on a dpdk interface in startup.conf: dpdk { dev 0000:18:01.0 { rss-queues 0,2,5-7 } } Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
2020-08-06misc: harmonize namesDave Barach1-1/+1
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-08-05interface: add pcap trace data preallocationDave Barach1-0/+2
Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2e53fa85a0b4082666f57a3a58a09c04ae2001b5
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo1-1/+5
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2019-12-04gre: Multi-point interfacesNeale Ranns1-0/+7
Type: feature Change-Id: I0129ad6ace44a50a8a3b26db8e445cd06b2b49e8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-04gso: remove the interface countMohsin Kazmi1-3/+0
Type: refactor Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-10-09interface: callback to manage extra MAC addressesMatthew Smith1-0/+10
Type: feature New callback vnet_hw_interface_add_del_mac_address(). Add or delete secondary MAC addresses on a hardware interface. This will allow packets to be processed which have a destination MAC address other than the primary programmed MAC address without needing to put the device into promiscuous mode. Change-Id: I6beecbcb8932fc1fe45b567f76fa3706feefae2c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-26misc: add vnet classify filter set supportDave Barach1-1/+5
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I79b216d2499df143f53977e5b70382f6f887e0bc
2019-09-23misc: unify pcap rx / tx / drop traceDave Barach1-7/+9
Use a single vnet_pcap_t in vlib_global_main, specifically to support unified tracing Update sphinx docs, doxygen tags Type: refactor Ticket: VPP-1776 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id15d41a596712968c0714cef1bd2cd5bc9cbdd55
2019-09-20misc: classifier-based packet trace filterDave Barach1-0/+1
See .../src/vnet/classify/trace_classify.h for the business end of the scheme. It would be best to hash pkts, prefetch buckets, and do the primary table lookups two at a time. The inline as given works, but perf tuning will be required. "At least it works..." Add "classify filter" debug cli, for example: classify filter mask l3 ip4 src dst \ match l3 ip4 dst 192.168.2.10 src 192.168.1.10 Add "pcap rx | tx trace ... filter" to use the current classify filter chain Patch includes sphinx documentation and doxygen tags. Next step: device-driver integration Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
2019-09-10misc: clean up "pcap [rx|tx] trace" debug CLIDave Barach1-0/+12
Separate debug CLI arg parsing from the underlying action function. Fixes a number of subtle ordering dependencies, and will allow us to add a binary API to control the feature at some point in the future. Type: refactor Ticket: VPP-1770 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id0dbeda06dad20e756c941c691e2088ce3c50ec7
2019-08-27interface: Remove residual dpdk bonding codeSteven Luong1-1/+1
dpdk bonding code was removed in 19.08. However, there are still references to VNET_SW_INTERFACE_FLAG_BOND_SLAVE which was set by the already removed code. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I949a7281e6273f2733dd7532cc4a3bb4f3ce30de
2019-07-31vppinfra: refactor test_and_set spinlocks to use clib_spinlock_tjaszha031-4/+4
Spinlock performance improved when implemented with compare_and_exchange instead of test_and_set. All instances of test_and_set locks were refactored to use clib_spinlock_t when possible. Some locks e.g. ssvm synchronize between processes rather than threads, so they cannot directly use clib_spinlock_t. Type: refactor Change-Id: Ia16b5d4cd49209b2b57b8df6c94615c28b11bb60 Signed-off-by: Jason Zhang <jason.zhang2@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-07-05sctp: move to plugins, disabled by defaultFlorin Coras1-0/+13
Removed sctp buffer metadata from vnet/buffer.h, added it to the plugin. Add registration APIs for plugin-based vlib_buffer_opaque / opaque2 decoders, used by "pcap dispatch trace ..." for display in the wireshark dissector. Type:refactor Not actively maintained. Change-Id: Ie4cb6ba66f68b3b3a7d7d2c63c917fdccf994371 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-28interface: fixes for buliding for 32bit targetsVijayabhaskar Katamreddy1-1/+1
* structure alignment and padding issues Type: fix Change-Id: Ic7c2a8cb5a5526902463f3b4d2d93284b454ab6f Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-1/+11
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-03ARP: add feature arcNeale Ranns1-1/+1
- arp-input, registered with the ethernet protocol dispatcher, performs basic checks and starts the arc - arp-reply; first feature on the arc replies to requests and learns from responses (no functional change) - arp-proxy; checks against the proxy DB arp-reply and arp-proxy are enabled when the interface is appropriately configured. Change-Id: I7d1bbabdb8c8b8187cac75e663daa4a5a7ce382a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-31bonding: add support for numa awarenessZhiyong Yang1-0/+4
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-11Stats: Spelling mistake: s/tx-unicast-miss/tx-unicast/Ole Troan1-1/+1
Change-Id: Ie71235e5a0ff84222d8a35f5d4e99e9b20447d61 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-13deprecate VLIB_DEVICE_TX_FUNCTION_MULTIARCHFilip Tehlar1-3/+0
Change-Id: I8819bcb9e228e7a432f4a7b67b6107f984927cd4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-02-22Callback functions must have the correct signatureNeale Ranns1-2/+2
Change-Id: I642823bdc3c7006a0b719ec1e3a9cd75b2b37253 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-19tap gso: experimental supportAndrew Yourtchenko1-0/+15
This commit adds a "gso" parameter to existing "create tap..." CLI, and a "no-gso" parameter for the compatibility with the future, when/if defaults change. It makes use of the lowest bit of the "tap_flags" field in the API call in order to allow creation of GSO interfaces via API as well. It does the necessary syscalls to enable the GSO and checksum offload support on the kernel side and sets two flags on the interface: virtio-specific virtio_if_t.gso_enabled, and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO. The first one, if enabled, triggers the marking of the GSO-encapsulated packets on ingress with VNET_BUFFER_F_GSO flag, and setting vnet_buffer2(b)->gso_size to the desired L4 payload size. VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet processing in interface-output for such packets: When the flag is set, they are sent out almost as usual (just taking care to set the vnet header for virtio). When the flag is not enabled (the case for most interfaces), the egress path performs the re-segmentation such that the L4 payload of the transmitted packets equals gso_size. The operations in the datapath are enabled only when there is at least one GSO-compatible interface in the system - this is done by tracking the count in interface_main.gso_interface_count. This way the impact of conditional checks for the setups that do not use GSO is minimized. "show tap" CLI shows the state of the GSO flag on the interface, and the total count of GSO-enabled interfaces (which is used to enable the GSO-related processing in the packet path). This commit lacks IPv6 extension header traversal support of any kind - the L4 payload is assumed to follow the IPv6 header. Also it performs the offloads only for TCP (TSO - TCP segmentation offload). The UDP fragmentation offload (UFO) is not part of it. For debug purposes it also adds the debug CLI: "set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>" Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-02-02Deprecate old mutliarch code, phase 1Damjan Marion1-23/+5
It is causing compilation sloness with gcc-7 so removing it before it was originally planned. So far macros are left in the tree so we can know which nodes to convert to new multiarch code. Change-Id: Idb14622ca61fdce1eba59723b20d98715b7971e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-21VPP-1549 Add missing counter name.Paul Vinciguerra1-1/+2
show interface Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count local0 0 down 0/0/0/0 pg0 1 down 9000/0/0/0 rx packets 582 rx bytes 34051 tx packets 4 tx bytes 364 drops 323 ip6 1 (nil) 580 ---- show interface Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count local0 0 down 0/0/0/0 pg0 1 down 9000/0/0/0 rx packets 582 rx bytes 34051 tx packets 4 tx bytes 364 drops 323 ip6 1 mpls 580 Change-Id: I3dcde4799764277535baf42f855e4e8bb48c0d02 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-17pcap-based dispatch tracerDave Barach1-1/+2
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc. through Wireshark Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-08vnet: remove unused fieldDamjan Marion1-2/+0
It is not used and just confuses people... Change-Id: Ic731432a785731271531f183b448e4591a1d2a8b Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-08vnet: store hw interface speed in kbps instead of using flagsDamjan Marion1-27/+4
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-29interface-flags; fix coverity error found in conversionNeale Ranns1-1/+2
Change-Id: I2eafac4ce810fe53454b729d81161ec80d036db7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-27Enumify interface flagsNeale Ranns1-30/+37
clang will emit a warning when the wrong enum type is passed to a function whose arguments are an enum type. free bug finding... Change-Id: I62215d8ef22c7527a31272e31f5d190e4e762e53 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das1-2/+2
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-3/+3
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-1/+2
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-13Multiarch handling in different constructor macrosDamjan Marion1-0/+14
This significantly reduces need for ... in multiarch code. Simply constructor macros will jost create static unused entry if CLIB_MARCH_VARIANT is defined and that will be optimized out by compiler. Change-Id: I17d1c4ac0c903adcfadaa4a07de1b854c7ab14ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-11Multiversioning: Device (tx) function constructorMohsin Kazmi1-0/+21
Change-Id: I39f87ca161c891fb22462a23188982fef7c3243f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-14/+22
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-07PipesNeale Ranns1-0/+1
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-15STATS: Add more hierarchy to counters.Ole Troan1-0/+20
Put error counters under node_index. /err/<node-name>/<error-name> E.g: /err/ip4-lookup/Hash table collisions /err/ip6-rewrite/Buffer allocation error Error names are not globally unique, and this allows for walking all errors for a particular node. Put interface counters under the directory /if. E.g. /if/rx Put system counters under the directory /sys. E.g. /sys/vector_rate Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-9/+18
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-11Fix issue with xconnect not working on the main interfaceDamjan Marion1-9/+6
Due to union, l2 sub-interface bits were wrongly set causing sporadic misconfiguration of l2 mode on some interfaces. Change-Id: Id77ee281e3a0030878641a786c22ffe16ce1c759 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion1-0/+20
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25Adjacency walk more scalableNeale Ranns1-0/+5
When walking all adjacencies for a given {next-hop,interface} instead of walking all the adjacencies on that interface and matching the next-hop (which is O(n) in the number of adjacencies on that link, find all instances of an adjacency with any link-type and wtih that {next-hop,interfacE} pair: this is O(1). Change-Id: Ic80399fc9e93c8df111379c039e592d8cafbab18 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-3/+8
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-8/+3
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven1-0/+8
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns1-1/+5
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-09plugins: unload plugin if early init failsDamjan Marion1-0/+41
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3 Signed-off-by: Damjan Marion <damarion@cisco.com>