aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ip
AgeCommit message (Collapse)AuthorFilesLines
2018-07-14Improve IP4 ARP and IP6 ND Events Notificationv18.10-rc0John Lo1-1/+7
For L2 ARP termination, use both brodcast ARP request and reply packets to provide MAC/IP binding events. For IP4/IP6 neighbor adress resolution, send resolution events if there is an address resolution attemp with a static neighbor entry where both IP and MAC matches. This allow probe of an IP neighbor with a static entry to confirm it is responding with a reply matching that of the static entry. Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f Signed-off-by: John Lo <loj@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion7-20/+21
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-09IGMP improvementsNeale Ranns6-18/+234
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-07PipesNeale Ranns1-0/+1
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-02Fixing ip4-reassembly ip6-reassembly non feature node, next_node_index settingVijayabhaskar Katamreddy2-1/+2
Change-Id: Ib988d87e6758ffa31862096391f9f286b0797f2b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-29Removing the static keyword do_fragment routines, so that could be accessed ↵Vijayabhaskar Katamreddy2-3/+8
outside the ip_frag nodes Change-Id: I46d3d10fa763fcf7a579620ec7cf1b204a53bce8 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-29IP4 Router Alert option handling for IGMPNeale Ranns4-14/+156
and a new ip4-options node, inserted between ip4-input and ip4-punt, that checks for IP-router-alert option + IGMP combination and sends the packet to the ip4-local. This is required because some IGMP packets are sent to the group address and not the all-routers address. All IGMP packets are sent with the router alert option. Change-Id: I01f478d4d98ac9f806e0bcba0f6da6e4e7d26e2a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-28reassembly: optimize bihash usageKlement Sekera2-45/+38
Change-Id: I19690db9996ecb8c5e86415d2fd3c7133ce698f8 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-28ip: vectorized ip checksumDamjan Marion2-69/+119
Change-Id: Ida678e6f31daa8decb18189da712a350336326e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-26Fix assert issue in ip_csum_add_even()Hongjun Ni1-1/+2
ASSERT (ip_csum_with_carry (d, x) == c) will raise assert if d equals to zero while x not equals to zero. Change-Id: Ia9ccdbf801ae565eaadd49f04569d13bfc31cba8 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-06-26node functions cannot be always_inlineDamjan Marion4-6/+6
Thanks to gcc-8 for highlighting this... Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-20Fix sw-if-index display error.Brant Lin1-2/+2
If the sw-if-index is set to -1, it will send out all interfaces' arp enties. In this case, the sw-if-index is always set to -1. It is not correct. Change-Id: I21e9ee078c757ac7efa70a2a1f1a7a4eb73d66a1 Signed-off-by: Brant Lin <brant.lin@ericsson.com>
2018-06-19Check get packet template allocation failure (VPP-1321)John Lo3-0/+12
After calling vlib_packet_template_get_packet(), make sure packet buffer is allocated before using it. Change-Id: Idb5199f4e2c9596137b2101e502d611f474a6ffe Signed-off-by: John Lo <loj@cisco.com>
2018-06-19ip checksum multiarch support, cleanupDave Barach2-109/+91
When computing tcp/udp checksums across large amounts of data - e.g. when NIC h/w checksum offload is not available - it's worth providing arch-dependent code; if only to compile the code w/ -O3. Fix calculation when data is fully unaligned / on an odd byte boundary. Add a buffer alignment test vector. Change-Id: I7644e2276ac6cbc3f575bf61746a6ffedbbb6150 Signed-off-by: Dave Barach <dave@barachs.net>
2018-06-14Use unicast DMAC for IP neighbor pool refresh probesJohn Lo7-15/+28
Change-Id: I12fbebd1d24c37dc77c147773ea522c8a4b7b99d Signed-off-by: John Lo <loj@cisco.com>
2018-06-14MTU: IP fragmentation added to ip4-rewrite and ip6-rewriteOle Troan3-15/+56
Change-Id: Ibae260273f25a319153be37470aed49ff73e957a Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-5/+2
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-08Add reaper functions to want events APIs (VPP-1304)Neale Ranns2-4/+135
Change-Id: Iaeb52d94cb6da63ee93af7c1cf2dade6046cba1d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-08Implement DHCPv6 PD client (VPP-718, VPP-1050)Juraj Sloboda2-0/+25
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-06-07Fix IP scan neighbor API/CLI handling of interval and staleJohn Lo1-2/+2
Change-Id: I77264c4398e6fad461bb4dc10867a1f9c3accec0 Signed-off-by: John Lo <loj@cisco.com>
2018-06-05bond: send gratuitous arp when the active slave went down in active-backup modeSteven2-14/+17
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead of vnet_hw_interface_t and add call to build_ethernet_rewrite to support subinterface/vlan - Add code to bonding driver to send an event to bond_process when the first interface becomes active or when the active interface is down - Create a bond_process to walk the interface and the corresponding subinterfaces to send garp/ip6_na when an event is received. - Minor cleanup in bonding/node.c Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is no attempt to fix it here. But the infra is now done and should be easy to add the support. Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1 Signed-off-by: Steven <sluong@cisco.com>
2018-06-04ip4: optimize ip4_localFlorin Coras2-253/+319
"sh run" says the number of clocks for my tcp based throughput test dropped from ~43 to ~23 Change-Id: I719439ba7fc079ad36be1432c5d7cf74e3b70d73 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-06-04ip: save fib index for buffer in ip lookupFlorin Coras5-114/+65
Avoids recomputing the fib index in ip local for locally delivered packets and should incur no extra cost when forwarding packets. Change-Id: Id826ffa8206392087327f154337eabc8a801b4d7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-30IPv6 for-us/receive multicast routes fixNeale Ranns1-0/+4
Change-Id: I5e29e16b4d45411b1a7c177b8d7156c5baefe6a1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-29/+5
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-28Fix IP neighbor/arp pool full and static entry handlingJohn Lo1-97/+100
Move handling of IP neighbor pool full into main thread on entry creation and make sure static entriesare not deleted for reuse. Fix IPv6 neighbor handling on interface down and up so that static entries are not deleted. Change-Id: I073794949a41a5b86201e519ebe479febfc506c8 Signed-off-by: John Lo <loj@cisco.com>
2018-05-27proxy_arp: remove unused is_addMarek Gradzki1-2/+1
Change-Id: I1773d962b373693a737d39c0c97e8c53eb91545a Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-05-27ip4-input node reworkDamjan Marion2-125/+336
Gain is around 6 clocks per packet (22 to 16). Change-Id: Ia6f4293ea9062368a9a6b235c650591dbc0707d0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-25Fix possible null pointer dereferenceJuraj Sloboda1-3/+14
Replace clib_warning with vlib_log_warn Change-Id: I6d0b8d97048b75f4418609264af0c14e19fad79b Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-05-25ARP proxy dumpsNeale Ranns3-14/+145
Change-Id: I8335ebf266becf2f42bb3f28a17dfed8d9b08f97 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-23VPP-1283: IPv6 PMTU missing MTU value in ICMP6 message.Ole Troan2-18/+30
Fix GRE/IPv6 setting of ip->payload_length (which has never worked). Change-Id: Ie68f1cc7bbb70489d6ec97356132c783f2345e1e Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23VPP-1283: IPv4 PMTU missing MTU value in ICMP4 message.Ole Troan2-32/+43
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23VPPAPIGEN: Add union and enum support and IP4/IP6 address type.Ole Troan1-0/+37
Note: The Python, Java and C/C++ bindings must be updated before ip/ip_types.api can be used. ip_types.api: typedef ip4_address { u8 address[4]; }; typedef ip6_address { u8 address[16]; }; enum address_family { ADDRESS_IP4 = 0, ADDRESS_IP6, }; union address_union { vl_api_ip4_address_t ip4; vl_api_ip6_address_t ip6; }; typedef address { vl_api_address_family_t af; vl_api_address_union_t un; }; Change-Id: I22f67092f24db5bd650a03c6f446a84cd9fd1074 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-20vector functions cleanup and improvementsDamjan Marion1-3/+2
Remove functions which have native C equivalent (i.e. _is_equal can be replaced with ==, _add with +) Add SSE4.2, AVX-512 implementations of splat, load_unaligned, store_unaligned, is_all_zero, is_equal, is_all_equal Change-Id: Ie80b0e482e7a76248ad79399c2576468532354cd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-18IP unnumbered dumpNeale Ranns2-1/+92
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-18IP address dump - don't send subnets for unnumbered interfacesNeale Ranns1-4/+6
Change-Id: I8c64a0d2f757d96ffa7fd042c23b0d814217c215 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-17Fixes in IPv6 RD control planeJuraj Sloboda2-30/+59
Add default route to the VRF table in which the interface is bound. Add missing pool_put. Change-Id: Id76c7dbfbf9bcf18357f372f3eee9b931df1995e Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-05-15No overlapping sub-nets on any interface in the same table/VRF (VPP-943)Neale Ranns2-25/+82
DBGvpp# set int ip addr loop0 10.10.10.10/24 DBGvpp# set int ip addr loop0 10.10.10.11/24 set interface ip address: failed to add 10.10.10.11/24 which conflicts with 10.10.10.10/24 for interface loop0 Change-Id: Iba63ffafbd36b6146ce86adb78139da9d55b40ba Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-14Rework CP and DP communication in IPv6 RD (VPP-1256)Juraj Sloboda4-359/+163
Replace binary API communication between CP and DP with direct communication using function calls and callbacks. Change-Id: Ib54f09062217c028e5ee0e96ae2449cf7e9224e3 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo6-5/+516
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion5-0/+94
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach2-0/+8
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-27IPv6 NS/RS; do not vec_validate global structs in the DPNeale Ranns1-12/+16
Change-Id: I5cab31639e7819c9ab7e9c9159d931b25161d00b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27IPv6 NS: use the mcast rewrite node to fill in the destination MACNeale Ranns2-263/+275
- move the IPv6 incomplete and glean node to ip6_neighbour.c (so it has access to ip6_neighbour_main_t) - use the RA info config on the interface to find the multicast adj to use Change-Id: I835e419072abe54fb09dafb0e7eb0a9e50eba1af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion3-8/+7
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-18Mcast rewrite optimisationsNeale Ranns3-8/+48
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all. Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns3-1/+25
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17VPP-1243: fix reassembly CLIKlement Sekera1-5/+6
Change-Id: Ie20aaf0eb1a5a338a54f0de4d6da661431be5163 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-16Implement ip_probe_neighbor APIJohn Lo2-9/+63
Add API support similar to VPP CLI "ip probe-neighbor" except API call is asynch and will not wait, as the CLI does, for address resolution of probed neighbor. The API client can use the APIs want_ip4_arp_events or want_ip6_nd_events to get notified of the desired address resolution event. Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3 Signed-off-by: John Lo <loj@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion5-128/+94
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>